drivers/ata/ahci_dm816.c

   1 /*
   2  * DaVinci DM816 AHCI SATA platform driver
   3  *
   4  * Copyright (C) 2017 BayLibre SAS
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2, or (at your option)
   9  * any later version.
  10  */
  11
  12 #include <linux/kernel.h>
  13 #include <linux/module.h>
  14 #include <linux/device.h>
  15 #include <linux/pm.h>
  16 #include <linux/platform_device.h>
  17 #include <linux/libata.h>
  18 #include <linux/ahci_platform.h>
  19
  20 #include "ahci.h"
  21
  22 #define AHCI_DM816_DRV_NAME             "ahci-dm816"
  23
  24 #define AHCI_DM816_PHY_ENPLL(x)         ((x) << 0)
  25 #define AHCI_DM816_PHY_MPY(x)           ((x) << 1)
  26 #define AHCI_DM816_PHY_LOS(x)           ((x) << 12)
  27 #define AHCI_DM816_PHY_RXCDR(x)         ((x) << 13)
  28 #define AHCI_DM816_PHY_RXEQ(x)          ((x) << 16)
  29 #define AHCI_DM816_PHY_TXSWING(x)       ((x) << 23)
  30
  31 #define AHCI_DM816_P0PHYCR_REG          0x178
  32 #define AHCI_DM816_P1PHYCR_REG          0x1f8
  33
  34 #define AHCI_DM816_PLL_OUT              1500000000LU
  35
  36 static const unsigned long pll_mpy_table[] = {
  37           400,  500,  600,  800,  825, 1000, 1200,
  38          1250, 1500, 1600, 1650, 2000, 2200, 2500
  39 };
  40
  41 static int ahci_dm816_get_mpy_bits(unsigned long refclk_rate)
  42 {
  43         unsigned long pll_multiplier;
  44         int i;
  45
  46         /*
  47          * We need to determine the value of the multiplier (MPY) bits.
  48          * In order to include the 8.25 multiplier we need to first divide
  49          * the refclk rate by 100.
  50          */
  51         pll_multiplier = AHCI_DM816_PLL_OUT / (refclk_rate / 100);
  52
  53         for (i = 0; i < ARRAY_SIZE(pll_mpy_table); i++) {
  54                 if (pll_mpy_table[i] == pll_multiplier)
  55                         return i;
  56         }
  57
  58         /*
  59          * We should have divided evenly - if not, return an invalid
  60          * value.
  61          */
  62         return -1;
  63 }
  64
  65 static int ahci_dm816_phy_init(struct ahci_host_priv *hpriv, struct device *dev)
  66 {
  67         unsigned long refclk_rate;
  68         int mpy;
  69         u32 val;
  70
  71         /*
  72          * We should have been supplied two clocks: the functional and
  73          * keep-alive clock and the external reference clock. We need the
  74          * rate of the latter to calculate the correct value of MPY bits.
  75          */
  76         if (!hpriv->clks[1]) {
  77                 dev_err(dev, "reference clock not supplied\n");
  78                 return -EINVAL;
  79         }
  80
  81         refclk_rate = clk_get_rate(hpriv->clks[1]);
  82         if ((refclk_rate % 100) != 0) {
  83                 dev_err(dev, "reference clock rate must be divisible by 100\n");
  84                 return -EINVAL;
  85         }
  86
  87         mpy = ahci_dm816_get_mpy_bits(refclk_rate);
  88         if (mpy < 0) {
  89                 dev_err(dev, "can't calculate the MPY bits value\n");
  90                 return -EINVAL;
  91         }
  92
  93         /* Enable the PHY and configure the first HBA port. */
  94         val = AHCI_DM816_PHY_MPY(mpy) | AHCI_DM816_PHY_LOS(1) |
  95               AHCI_DM816_PHY_RXCDR(4) | AHCI_DM816_PHY_RXEQ(1) |
  96               AHCI_DM816_PHY_TXSWING(3) | AHCI_DM816_PHY_ENPLL(1);
  97         writel(val, hpriv->mmio + AHCI_DM816_P0PHYCR_REG);
  98
  99         /* Configure the second HBA port. */
 100         val = AHCI_DM816_PHY_LOS(1) | AHCI_DM816_PHY_RXCDR(4) |
 101               AHCI_DM816_PHY_RXEQ(1) | AHCI_DM816_PHY_TXSWING(3);
 102         writel(val, hpriv->mmio + AHCI_DM816_P1PHYCR_REG);
 103
 104         return 0;
 105 }
 106
 107 static int ahci_dm816_softreset(struct ata_link *link,
 108                                 unsigned int *class, unsigned long deadline)
 109 {
 110         int pmp, ret;
 111
 112         pmp = sata_srst_pmp(link);
 113
 114         /*
 115          * There's an issue with the SATA controller on DM816 SoC: if we
 116          * enable Port Multiplier support, but the drive is connected directly
 117          * to the board, it can't be detected. As a workaround: if PMP is
 118          * enabled, we first call ahci_do_softreset() and pass it the result of
 119          * sata_srst_pmp(). If this call fails, we retry with pmp = 0.
 120          */
 121         ret = ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready);
 122         if (pmp && ret == -EBUSY)
 123                 return ahci_do_softreset(link, class, 0,
 124                                          deadline, ahci_check_ready);
 125
 126         return ret;
 127 }
 128
 129 static struct ata_port_operations ahci_dm816_port_ops = {
 130         .inherits = &ahci_platform_ops,
 131         .softreset = ahci_dm816_softreset,
 132 };
 133
 134 static const struct ata_port_info ahci_dm816_port_info = {
 135         .flags          = AHCI_FLAG_COMMON,
 136         .pio_mask       = ATA_PIO4,
 137         .udma_mask      = ATA_UDMA6,
 138         .port_ops       = &ahci_dm816_port_ops,
 139 };
 140
 141 static struct scsi_host_template ahci_dm816_platform_sht = {
 142         AHCI_SHT(AHCI_DM816_DRV_NAME),
 143 };
 144
 145 static int ahci_dm816_probe(struct platform_device *pdev)
 146 {
 147         struct device *dev = &pdev->dev;
 148         struct ahci_host_priv *hpriv;
 149         int rc;
 150
 151         hpriv = ahci_platform_get_resources(pdev, 0);
 152         if (IS_ERR(hpriv))
 153                 return PTR_ERR(hpriv);
 154
 155         rc = ahci_platform_enable_resources(hpriv);
 156         if (rc)
 157                 return rc;
 158
 159         rc = ahci_dm816_phy_init(hpriv, dev);
 160         if (rc)
 161                 goto disable_resources;
 162
 163         rc = ahci_platform_init_host(pdev, hpriv,
 164                                      &ahci_dm816_port_info,
 165                                      &ahci_dm816_platform_sht);
 166         if (rc)
 167                 goto disable_resources;
 168
 169         return 0;
 170
 171 disable_resources:
 172         ahci_platform_disable_resources(hpriv);
 173
 174         return rc;
 175 }
 176
 177 static SIMPLE_DEV_PM_OPS(ahci_dm816_pm_ops,
 178                          ahci_platform_suspend,
 179                          ahci_platform_resume);
 180
 181 static const struct of_device_id ahci_dm816_of_match[] = {
 182         { .compatible = "ti,dm816-ahci", },
 183         { },
 184 };
 185 MODULE_DEVICE_TABLE(of, ahci_dm816_of_match);
 186
 187 static struct platform_driver ahci_dm816_driver = {
 188         .probe = ahci_dm816_probe,
 189         .remove = ata_platform_remove_one,
 190         .driver = {
 191                 .name = AHCI_DM816_DRV_NAME,
 192                 .of_match_table = ahci_dm816_of_match,
 193                 .pm = &ahci_dm816_pm_ops,
 194         },
 195 };
 196 module_platform_driver(ahci_dm816_driver);
 197
 198 MODULE_DESCRIPTION("DaVinci DM816 AHCI SATA platform driver");
 199 MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>");
 200 MODULE_LICENSE("GPL");