Linux 4.19.133
[linux/fpc-iii.git] / drivers / ata / sata_sil24.c
blob319f517137cd57c886482719ff6e01d28642eb7f
1 /*
2 * sata_sil24.c - Driver for Silicon Image 3124/3132 SATA-2 controllers
4 * Copyright 2005 Tejun Heo
6 * Based on preview driver from Silicon Image.
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2, or (at your option) any
11 * later version.
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 * General Public License for more details.
20 #include <linux/kernel.h>
21 #include <linux/module.h>
22 #include <linux/gfp.h>
23 #include <linux/pci.h>
24 #include <linux/blkdev.h>
25 #include <linux/delay.h>
26 #include <linux/interrupt.h>
27 #include <linux/dma-mapping.h>
28 #include <linux/device.h>
29 #include <scsi/scsi_host.h>
30 #include <scsi/scsi_cmnd.h>
31 #include <linux/libata.h>
33 #define DRV_NAME "sata_sil24"
34 #define DRV_VERSION "1.1"
37 * Port request block (PRB) 32 bytes
39 struct sil24_prb {
40 __le16 ctrl;
41 __le16 prot;
42 __le32 rx_cnt;
43 u8 fis[6 * 4];
47 * Scatter gather entry (SGE) 16 bytes
49 struct sil24_sge {
50 __le64 addr;
51 __le32 cnt;
52 __le32 flags;
56 enum {
57 SIL24_HOST_BAR = 0,
58 SIL24_PORT_BAR = 2,
60 /* sil24 fetches in chunks of 64bytes. The first block
61 * contains the PRB and two SGEs. From the second block, it's
62 * consisted of four SGEs and called SGT. Calculate the
63 * number of SGTs that fit into one page.
65 SIL24_PRB_SZ = sizeof(struct sil24_prb)
66 + 2 * sizeof(struct sil24_sge),
67 SIL24_MAX_SGT = (PAGE_SIZE - SIL24_PRB_SZ)
68 / (4 * sizeof(struct sil24_sge)),
70 /* This will give us one unused SGEs for ATA. This extra SGE
71 * will be used to store CDB for ATAPI devices.
73 SIL24_MAX_SGE = 4 * SIL24_MAX_SGT + 1,
76 * Global controller registers (128 bytes @ BAR0)
78 /* 32 bit regs */
79 HOST_SLOT_STAT = 0x00, /* 32 bit slot stat * 4 */
80 HOST_CTRL = 0x40,
81 HOST_IRQ_STAT = 0x44,
82 HOST_PHY_CFG = 0x48,
83 HOST_BIST_CTRL = 0x50,
84 HOST_BIST_PTRN = 0x54,
85 HOST_BIST_STAT = 0x58,
86 HOST_MEM_BIST_STAT = 0x5c,
87 HOST_FLASH_CMD = 0x70,
88 /* 8 bit regs */
89 HOST_FLASH_DATA = 0x74,
90 HOST_TRANSITION_DETECT = 0x75,
91 HOST_GPIO_CTRL = 0x76,
92 HOST_I2C_ADDR = 0x78, /* 32 bit */
93 HOST_I2C_DATA = 0x7c,
94 HOST_I2C_XFER_CNT = 0x7e,
95 HOST_I2C_CTRL = 0x7f,
97 /* HOST_SLOT_STAT bits */
98 HOST_SSTAT_ATTN = (1 << 31),
100 /* HOST_CTRL bits */
101 HOST_CTRL_M66EN = (1 << 16), /* M66EN PCI bus signal */
102 HOST_CTRL_TRDY = (1 << 17), /* latched PCI TRDY */
103 HOST_CTRL_STOP = (1 << 18), /* latched PCI STOP */
104 HOST_CTRL_DEVSEL = (1 << 19), /* latched PCI DEVSEL */
105 HOST_CTRL_REQ64 = (1 << 20), /* latched PCI REQ64 */
106 HOST_CTRL_GLOBAL_RST = (1 << 31), /* global reset */
109 * Port registers
110 * (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2)
112 PORT_REGS_SIZE = 0x2000,
114 PORT_LRAM = 0x0000, /* 31 LRAM slots and PMP regs */
115 PORT_LRAM_SLOT_SZ = 0x0080, /* 32 bytes PRB + 2 SGE, ACT... */
117 PORT_PMP = 0x0f80, /* 8 bytes PMP * 16 (128 bytes) */
118 PORT_PMP_STATUS = 0x0000, /* port device status offset */
119 PORT_PMP_QACTIVE = 0x0004, /* port device QActive offset */
120 PORT_PMP_SIZE = 0x0008, /* 8 bytes per PMP */
122 /* 32 bit regs */
123 PORT_CTRL_STAT = 0x1000, /* write: ctrl-set, read: stat */
124 PORT_CTRL_CLR = 0x1004, /* write: ctrl-clear */
125 PORT_IRQ_STAT = 0x1008, /* high: status, low: interrupt */
126 PORT_IRQ_ENABLE_SET = 0x1010, /* write: enable-set */
127 PORT_IRQ_ENABLE_CLR = 0x1014, /* write: enable-clear */
128 PORT_ACTIVATE_UPPER_ADDR= 0x101c,
129 PORT_EXEC_FIFO = 0x1020, /* command execution fifo */
130 PORT_CMD_ERR = 0x1024, /* command error number */
131 PORT_FIS_CFG = 0x1028,
132 PORT_FIFO_THRES = 0x102c,
133 /* 16 bit regs */
134 PORT_DECODE_ERR_CNT = 0x1040,
135 PORT_DECODE_ERR_THRESH = 0x1042,
136 PORT_CRC_ERR_CNT = 0x1044,
137 PORT_CRC_ERR_THRESH = 0x1046,
138 PORT_HSHK_ERR_CNT = 0x1048,
139 PORT_HSHK_ERR_THRESH = 0x104a,
140 /* 32 bit regs */
141 PORT_PHY_CFG = 0x1050,
142 PORT_SLOT_STAT = 0x1800,
143 PORT_CMD_ACTIVATE = 0x1c00, /* 64 bit cmd activate * 31 (248 bytes) */
144 PORT_CONTEXT = 0x1e04,
145 PORT_EXEC_DIAG = 0x1e00, /* 32bit exec diag * 16 (64 bytes, 0-10 used on 3124) */
146 PORT_PSD_DIAG = 0x1e40, /* 32bit psd diag * 16 (64 bytes, 0-8 used on 3124) */
147 PORT_SCONTROL = 0x1f00,
148 PORT_SSTATUS = 0x1f04,
149 PORT_SERROR = 0x1f08,
150 PORT_SACTIVE = 0x1f0c,
152 /* PORT_CTRL_STAT bits */
153 PORT_CS_PORT_RST = (1 << 0), /* port reset */
154 PORT_CS_DEV_RST = (1 << 1), /* device reset */
155 PORT_CS_INIT = (1 << 2), /* port initialize */
156 PORT_CS_IRQ_WOC = (1 << 3), /* interrupt write one to clear */
157 PORT_CS_CDB16 = (1 << 5), /* 0=12b cdb, 1=16b cdb */
158 PORT_CS_PMP_RESUME = (1 << 6), /* PMP resume */
159 PORT_CS_32BIT_ACTV = (1 << 10), /* 32-bit activation */
160 PORT_CS_PMP_EN = (1 << 13), /* port multiplier enable */
161 PORT_CS_RDY = (1 << 31), /* port ready to accept commands */
163 /* PORT_IRQ_STAT/ENABLE_SET/CLR */
164 /* bits[11:0] are masked */
165 PORT_IRQ_COMPLETE = (1 << 0), /* command(s) completed */
166 PORT_IRQ_ERROR = (1 << 1), /* command execution error */
167 PORT_IRQ_PORTRDY_CHG = (1 << 2), /* port ready change */
168 PORT_IRQ_PWR_CHG = (1 << 3), /* power management change */
169 PORT_IRQ_PHYRDY_CHG = (1 << 4), /* PHY ready change */
170 PORT_IRQ_COMWAKE = (1 << 5), /* COMWAKE received */
171 PORT_IRQ_UNK_FIS = (1 << 6), /* unknown FIS received */
172 PORT_IRQ_DEV_XCHG = (1 << 7), /* device exchanged */
173 PORT_IRQ_8B10B = (1 << 8), /* 8b/10b decode error threshold */
174 PORT_IRQ_CRC = (1 << 9), /* CRC error threshold */
175 PORT_IRQ_HANDSHAKE = (1 << 10), /* handshake error threshold */
176 PORT_IRQ_SDB_NOTIFY = (1 << 11), /* SDB notify received */
178 DEF_PORT_IRQ = PORT_IRQ_COMPLETE | PORT_IRQ_ERROR |
179 PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG |
180 PORT_IRQ_UNK_FIS | PORT_IRQ_SDB_NOTIFY,
182 /* bits[27:16] are unmasked (raw) */
183 PORT_IRQ_RAW_SHIFT = 16,
184 PORT_IRQ_MASKED_MASK = 0x7ff,
185 PORT_IRQ_RAW_MASK = (0x7ff << PORT_IRQ_RAW_SHIFT),
187 /* ENABLE_SET/CLR specific, intr steering - 2 bit field */
188 PORT_IRQ_STEER_SHIFT = 30,
189 PORT_IRQ_STEER_MASK = (3 << PORT_IRQ_STEER_SHIFT),
191 /* PORT_CMD_ERR constants */
192 PORT_CERR_DEV = 1, /* Error bit in D2H Register FIS */
193 PORT_CERR_SDB = 2, /* Error bit in SDB FIS */
194 PORT_CERR_DATA = 3, /* Error in data FIS not detected by dev */
195 PORT_CERR_SEND = 4, /* Initial cmd FIS transmission failure */
196 PORT_CERR_INCONSISTENT = 5, /* Protocol mismatch */
197 PORT_CERR_DIRECTION = 6, /* Data direction mismatch */
198 PORT_CERR_UNDERRUN = 7, /* Ran out of SGEs while writing */
199 PORT_CERR_OVERRUN = 8, /* Ran out of SGEs while reading */
200 PORT_CERR_PKT_PROT = 11, /* DIR invalid in 1st PIO setup of ATAPI */
201 PORT_CERR_SGT_BOUNDARY = 16, /* PLD ecode 00 - SGT not on qword boundary */
202 PORT_CERR_SGT_TGTABRT = 17, /* PLD ecode 01 - target abort */
203 PORT_CERR_SGT_MSTABRT = 18, /* PLD ecode 10 - master abort */
204 PORT_CERR_SGT_PCIPERR = 19, /* PLD ecode 11 - PCI parity err while fetching SGT */
205 PORT_CERR_CMD_BOUNDARY = 24, /* ctrl[15:13] 001 - PRB not on qword boundary */
206 PORT_CERR_CMD_TGTABRT = 25, /* ctrl[15:13] 010 - target abort */
207 PORT_CERR_CMD_MSTABRT = 26, /* ctrl[15:13] 100 - master abort */
208 PORT_CERR_CMD_PCIPERR = 27, /* ctrl[15:13] 110 - PCI parity err while fetching PRB */
209 PORT_CERR_XFR_UNDEF = 32, /* PSD ecode 00 - undefined */
210 PORT_CERR_XFR_TGTABRT = 33, /* PSD ecode 01 - target abort */
211 PORT_CERR_XFR_MSTABRT = 34, /* PSD ecode 10 - master abort */
212 PORT_CERR_XFR_PCIPERR = 35, /* PSD ecode 11 - PCI prity err during transfer */
213 PORT_CERR_SENDSERVICE = 36, /* FIS received while sending service */
215 /* bits of PRB control field */
216 PRB_CTRL_PROTOCOL = (1 << 0), /* override def. ATA protocol */
217 PRB_CTRL_PACKET_READ = (1 << 4), /* PACKET cmd read */
218 PRB_CTRL_PACKET_WRITE = (1 << 5), /* PACKET cmd write */
219 PRB_CTRL_NIEN = (1 << 6), /* Mask completion irq */
220 PRB_CTRL_SRST = (1 << 7), /* Soft reset request (ign BSY?) */
222 /* PRB protocol field */
223 PRB_PROT_PACKET = (1 << 0),
224 PRB_PROT_TCQ = (1 << 1),
225 PRB_PROT_NCQ = (1 << 2),
226 PRB_PROT_READ = (1 << 3),
227 PRB_PROT_WRITE = (1 << 4),
228 PRB_PROT_TRANSPARENT = (1 << 5),
231 * Other constants
233 SGE_TRM = (1 << 31), /* Last SGE in chain */
234 SGE_LNK = (1 << 30), /* linked list
235 Points to SGT, not SGE */
236 SGE_DRD = (1 << 29), /* discard data read (/dev/null)
237 data address ignored */
239 SIL24_MAX_CMDS = 31,
241 /* board id */
242 BID_SIL3124 = 0,
243 BID_SIL3132 = 1,
244 BID_SIL3131 = 2,
246 /* host flags */
247 SIL24_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA |
248 ATA_FLAG_NCQ | ATA_FLAG_ACPI_SATA |
249 ATA_FLAG_AN | ATA_FLAG_PMP,
250 SIL24_FLAG_PCIX_IRQ_WOC = (1 << 24), /* IRQ loss errata on PCI-X */
252 IRQ_STAT_4PORTS = 0xf,
255 struct sil24_ata_block {
256 struct sil24_prb prb;
257 struct sil24_sge sge[SIL24_MAX_SGE];
260 struct sil24_atapi_block {
261 struct sil24_prb prb;
262 u8 cdb[16];
263 struct sil24_sge sge[SIL24_MAX_SGE];
266 union sil24_cmd_block {
267 struct sil24_ata_block ata;
268 struct sil24_atapi_block atapi;
271 static const struct sil24_cerr_info {
272 unsigned int err_mask, action;
273 const char *desc;
274 } sil24_cerr_db[] = {
275 [0] = { AC_ERR_DEV, 0,
276 "device error" },
277 [PORT_CERR_DEV] = { AC_ERR_DEV, 0,
278 "device error via D2H FIS" },
279 [PORT_CERR_SDB] = { AC_ERR_DEV, 0,
280 "device error via SDB FIS" },
281 [PORT_CERR_DATA] = { AC_ERR_ATA_BUS, ATA_EH_RESET,
282 "error in data FIS" },
283 [PORT_CERR_SEND] = { AC_ERR_ATA_BUS, ATA_EH_RESET,
284 "failed to transmit command FIS" },
285 [PORT_CERR_INCONSISTENT] = { AC_ERR_HSM, ATA_EH_RESET,
286 "protocol mismatch" },
287 [PORT_CERR_DIRECTION] = { AC_ERR_HSM, ATA_EH_RESET,
288 "data direction mismatch" },
289 [PORT_CERR_UNDERRUN] = { AC_ERR_HSM, ATA_EH_RESET,
290 "ran out of SGEs while writing" },
291 [PORT_CERR_OVERRUN] = { AC_ERR_HSM, ATA_EH_RESET,
292 "ran out of SGEs while reading" },
293 [PORT_CERR_PKT_PROT] = { AC_ERR_HSM, ATA_EH_RESET,
294 "invalid data direction for ATAPI CDB" },
295 [PORT_CERR_SGT_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_RESET,
296 "SGT not on qword boundary" },
297 [PORT_CERR_SGT_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
298 "PCI target abort while fetching SGT" },
299 [PORT_CERR_SGT_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
300 "PCI master abort while fetching SGT" },
301 [PORT_CERR_SGT_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
302 "PCI parity error while fetching SGT" },
303 [PORT_CERR_CMD_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_RESET,
304 "PRB not on qword boundary" },
305 [PORT_CERR_CMD_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
306 "PCI target abort while fetching PRB" },
307 [PORT_CERR_CMD_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
308 "PCI master abort while fetching PRB" },
309 [PORT_CERR_CMD_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
310 "PCI parity error while fetching PRB" },
311 [PORT_CERR_XFR_UNDEF] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
312 "undefined error while transferring data" },
313 [PORT_CERR_XFR_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
314 "PCI target abort while transferring data" },
315 [PORT_CERR_XFR_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
316 "PCI master abort while transferring data" },
317 [PORT_CERR_XFR_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_RESET,
318 "PCI parity error while transferring data" },
319 [PORT_CERR_SENDSERVICE] = { AC_ERR_HSM, ATA_EH_RESET,
320 "FIS received while sending service FIS" },
324 * ap->private_data
326 * The preview driver always returned 0 for status. We emulate it
327 * here from the previous interrupt.
329 struct sil24_port_priv {
330 union sil24_cmd_block *cmd_block; /* 32 cmd blocks */
331 dma_addr_t cmd_block_dma; /* DMA base addr for them */
332 int do_port_rst;
335 static void sil24_dev_config(struct ata_device *dev);
336 static int sil24_scr_read(struct ata_link *link, unsigned sc_reg, u32 *val);
337 static int sil24_scr_write(struct ata_link *link, unsigned sc_reg, u32 val);
338 static int sil24_qc_defer(struct ata_queued_cmd *qc);
339 static void sil24_qc_prep(struct ata_queued_cmd *qc);
340 static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc);
341 static bool sil24_qc_fill_rtf(struct ata_queued_cmd *qc);
342 static void sil24_pmp_attach(struct ata_port *ap);
343 static void sil24_pmp_detach(struct ata_port *ap);
344 static void sil24_freeze(struct ata_port *ap);
345 static void sil24_thaw(struct ata_port *ap);
346 static int sil24_softreset(struct ata_link *link, unsigned int *class,
347 unsigned long deadline);
348 static int sil24_hardreset(struct ata_link *link, unsigned int *class,
349 unsigned long deadline);
350 static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class,
351 unsigned long deadline);
352 static void sil24_error_handler(struct ata_port *ap);
353 static void sil24_post_internal_cmd(struct ata_queued_cmd *qc);
354 static int sil24_port_start(struct ata_port *ap);
355 static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
356 #ifdef CONFIG_PM_SLEEP
357 static int sil24_pci_device_resume(struct pci_dev *pdev);
358 #endif
359 #ifdef CONFIG_PM
360 static int sil24_port_resume(struct ata_port *ap);
361 #endif
363 static const struct pci_device_id sil24_pci_tbl[] = {
364 { PCI_VDEVICE(CMD, 0x3124), BID_SIL3124 },
365 { PCI_VDEVICE(INTEL, 0x3124), BID_SIL3124 },
366 { PCI_VDEVICE(CMD, 0x3132), BID_SIL3132 },
367 { PCI_VDEVICE(CMD, 0x0242), BID_SIL3132 },
368 { PCI_VDEVICE(CMD, 0x0244), BID_SIL3132 },
369 { PCI_VDEVICE(CMD, 0x3131), BID_SIL3131 },
370 { PCI_VDEVICE(CMD, 0x3531), BID_SIL3131 },
372 { } /* terminate list */
375 static struct pci_driver sil24_pci_driver = {
376 .name = DRV_NAME,
377 .id_table = sil24_pci_tbl,
378 .probe = sil24_init_one,
379 .remove = ata_pci_remove_one,
380 #ifdef CONFIG_PM_SLEEP
381 .suspend = ata_pci_device_suspend,
382 .resume = sil24_pci_device_resume,
383 #endif
386 static struct scsi_host_template sil24_sht = {
387 ATA_NCQ_SHT(DRV_NAME),
388 .can_queue = SIL24_MAX_CMDS,
389 .sg_tablesize = SIL24_MAX_SGE,
390 .dma_boundary = ATA_DMA_BOUNDARY,
391 .tag_alloc_policy = BLK_TAG_ALLOC_FIFO,
394 static struct ata_port_operations sil24_ops = {
395 .inherits = &sata_pmp_port_ops,
397 .qc_defer = sil24_qc_defer,
398 .qc_prep = sil24_qc_prep,
399 .qc_issue = sil24_qc_issue,
400 .qc_fill_rtf = sil24_qc_fill_rtf,
402 .freeze = sil24_freeze,
403 .thaw = sil24_thaw,
404 .softreset = sil24_softreset,
405 .hardreset = sil24_hardreset,
406 .pmp_softreset = sil24_softreset,
407 .pmp_hardreset = sil24_pmp_hardreset,
408 .error_handler = sil24_error_handler,
409 .post_internal_cmd = sil24_post_internal_cmd,
410 .dev_config = sil24_dev_config,
412 .scr_read = sil24_scr_read,
413 .scr_write = sil24_scr_write,
414 .pmp_attach = sil24_pmp_attach,
415 .pmp_detach = sil24_pmp_detach,
417 .port_start = sil24_port_start,
418 #ifdef CONFIG_PM
419 .port_resume = sil24_port_resume,
420 #endif
423 static bool sata_sil24_msi; /* Disable MSI */
424 module_param_named(msi, sata_sil24_msi, bool, S_IRUGO);
425 MODULE_PARM_DESC(msi, "Enable MSI (Default: false)");
428 * Use bits 30-31 of port_flags to encode available port numbers.
429 * Current maxium is 4.
431 #define SIL24_NPORTS2FLAG(nports) ((((unsigned)(nports) - 1) & 0x3) << 30)
432 #define SIL24_FLAG2NPORTS(flag) ((((flag) >> 30) & 0x3) + 1)
434 static const struct ata_port_info sil24_port_info[] = {
435 /* sil_3124 */
437 .flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) |
438 SIL24_FLAG_PCIX_IRQ_WOC,
439 .pio_mask = ATA_PIO4,
440 .mwdma_mask = ATA_MWDMA2,
441 .udma_mask = ATA_UDMA5,
442 .port_ops = &sil24_ops,
444 /* sil_3132 */
446 .flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2),
447 .pio_mask = ATA_PIO4,
448 .mwdma_mask = ATA_MWDMA2,
449 .udma_mask = ATA_UDMA5,
450 .port_ops = &sil24_ops,
452 /* sil_3131/sil_3531 */
454 .flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1),
455 .pio_mask = ATA_PIO4,
456 .mwdma_mask = ATA_MWDMA2,
457 .udma_mask = ATA_UDMA5,
458 .port_ops = &sil24_ops,
462 static int sil24_tag(int tag)
464 if (unlikely(ata_tag_internal(tag)))
465 return 0;
466 return tag;
469 static unsigned long sil24_port_offset(struct ata_port *ap)
471 return ap->port_no * PORT_REGS_SIZE;
474 static void __iomem *sil24_port_base(struct ata_port *ap)
476 return ap->host->iomap[SIL24_PORT_BAR] + sil24_port_offset(ap);
479 static void sil24_dev_config(struct ata_device *dev)
481 void __iomem *port = sil24_port_base(dev->link->ap);
483 if (dev->cdb_len == 16)
484 writel(PORT_CS_CDB16, port + PORT_CTRL_STAT);
485 else
486 writel(PORT_CS_CDB16, port + PORT_CTRL_CLR);
489 static void sil24_read_tf(struct ata_port *ap, int tag, struct ata_taskfile *tf)
491 void __iomem *port = sil24_port_base(ap);
492 struct sil24_prb __iomem *prb;
493 u8 fis[6 * 4];
495 prb = port + PORT_LRAM + sil24_tag(tag) * PORT_LRAM_SLOT_SZ;
496 memcpy_fromio(fis, prb->fis, sizeof(fis));
497 ata_tf_from_fis(fis, tf);
500 static int sil24_scr_map[] = {
501 [SCR_CONTROL] = 0,
502 [SCR_STATUS] = 1,
503 [SCR_ERROR] = 2,
504 [SCR_ACTIVE] = 3,
507 static int sil24_scr_read(struct ata_link *link, unsigned sc_reg, u32 *val)
509 void __iomem *scr_addr = sil24_port_base(link->ap) + PORT_SCONTROL;
511 if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
512 *val = readl(scr_addr + sil24_scr_map[sc_reg] * 4);
513 return 0;
515 return -EINVAL;
518 static int sil24_scr_write(struct ata_link *link, unsigned sc_reg, u32 val)
520 void __iomem *scr_addr = sil24_port_base(link->ap) + PORT_SCONTROL;
522 if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
523 writel(val, scr_addr + sil24_scr_map[sc_reg] * 4);
524 return 0;
526 return -EINVAL;
529 static void sil24_config_port(struct ata_port *ap)
531 void __iomem *port = sil24_port_base(ap);
533 /* configure IRQ WoC */
534 if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC)
535 writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT);
536 else
537 writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
539 /* zero error counters. */
540 writew(0x8000, port + PORT_DECODE_ERR_THRESH);
541 writew(0x8000, port + PORT_CRC_ERR_THRESH);
542 writew(0x8000, port + PORT_HSHK_ERR_THRESH);
543 writew(0x0000, port + PORT_DECODE_ERR_CNT);
544 writew(0x0000, port + PORT_CRC_ERR_CNT);
545 writew(0x0000, port + PORT_HSHK_ERR_CNT);
547 /* always use 64bit activation */
548 writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR);
550 /* clear port multiplier enable and resume bits */
551 writel(PORT_CS_PMP_EN | PORT_CS_PMP_RESUME, port + PORT_CTRL_CLR);
554 static void sil24_config_pmp(struct ata_port *ap, int attached)
556 void __iomem *port = sil24_port_base(ap);
558 if (attached)
559 writel(PORT_CS_PMP_EN, port + PORT_CTRL_STAT);
560 else
561 writel(PORT_CS_PMP_EN, port + PORT_CTRL_CLR);
564 static void sil24_clear_pmp(struct ata_port *ap)
566 void __iomem *port = sil24_port_base(ap);
567 int i;
569 writel(PORT_CS_PMP_RESUME, port + PORT_CTRL_CLR);
571 for (i = 0; i < SATA_PMP_MAX_PORTS; i++) {
572 void __iomem *pmp_base = port + PORT_PMP + i * PORT_PMP_SIZE;
574 writel(0, pmp_base + PORT_PMP_STATUS);
575 writel(0, pmp_base + PORT_PMP_QACTIVE);
579 static int sil24_init_port(struct ata_port *ap)
581 void __iomem *port = sil24_port_base(ap);
582 struct sil24_port_priv *pp = ap->private_data;
583 u32 tmp;
585 /* clear PMP error status */
586 if (sata_pmp_attached(ap))
587 sil24_clear_pmp(ap);
589 writel(PORT_CS_INIT, port + PORT_CTRL_STAT);
590 ata_wait_register(ap, port + PORT_CTRL_STAT,
591 PORT_CS_INIT, PORT_CS_INIT, 10, 100);
592 tmp = ata_wait_register(ap, port + PORT_CTRL_STAT,
593 PORT_CS_RDY, 0, 10, 100);
595 if ((tmp & (PORT_CS_INIT | PORT_CS_RDY)) != PORT_CS_RDY) {
596 pp->do_port_rst = 1;
597 ap->link.eh_context.i.action |= ATA_EH_RESET;
598 return -EIO;
601 return 0;
604 static int sil24_exec_polled_cmd(struct ata_port *ap, int pmp,
605 const struct ata_taskfile *tf,
606 int is_cmd, u32 ctrl,
607 unsigned long timeout_msec)
609 void __iomem *port = sil24_port_base(ap);
610 struct sil24_port_priv *pp = ap->private_data;
611 struct sil24_prb *prb = &pp->cmd_block[0].ata.prb;
612 dma_addr_t paddr = pp->cmd_block_dma;
613 u32 irq_enabled, irq_mask, irq_stat;
614 int rc;
616 prb->ctrl = cpu_to_le16(ctrl);
617 ata_tf_to_fis(tf, pmp, is_cmd, prb->fis);
619 /* temporarily plug completion and error interrupts */
620 irq_enabled = readl(port + PORT_IRQ_ENABLE_SET);
621 writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR, port + PORT_IRQ_ENABLE_CLR);
624 * The barrier is required to ensure that writes to cmd_block reach
625 * the memory before the write to PORT_CMD_ACTIVATE.
627 wmb();
628 writel((u32)paddr, port + PORT_CMD_ACTIVATE);
629 writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4);
631 irq_mask = (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR) << PORT_IRQ_RAW_SHIFT;
632 irq_stat = ata_wait_register(ap, port + PORT_IRQ_STAT, irq_mask, 0x0,
633 10, timeout_msec);
635 writel(irq_mask, port + PORT_IRQ_STAT); /* clear IRQs */
636 irq_stat >>= PORT_IRQ_RAW_SHIFT;
638 if (irq_stat & PORT_IRQ_COMPLETE)
639 rc = 0;
640 else {
641 /* force port into known state */
642 sil24_init_port(ap);
644 if (irq_stat & PORT_IRQ_ERROR)
645 rc = -EIO;
646 else
647 rc = -EBUSY;
650 /* restore IRQ enabled */
651 writel(irq_enabled, port + PORT_IRQ_ENABLE_SET);
653 return rc;
656 static int sil24_softreset(struct ata_link *link, unsigned int *class,
657 unsigned long deadline)
659 struct ata_port *ap = link->ap;
660 int pmp = sata_srst_pmp(link);
661 unsigned long timeout_msec = 0;
662 struct ata_taskfile tf;
663 const char *reason;
664 int rc;
666 DPRINTK("ENTER\n");
668 /* put the port into known state */
669 if (sil24_init_port(ap)) {
670 reason = "port not ready";
671 goto err;
674 /* do SRST */
675 if (time_after(deadline, jiffies))
676 timeout_msec = jiffies_to_msecs(deadline - jiffies);
678 ata_tf_init(link->device, &tf); /* doesn't really matter */
679 rc = sil24_exec_polled_cmd(ap, pmp, &tf, 0, PRB_CTRL_SRST,
680 timeout_msec);
681 if (rc == -EBUSY) {
682 reason = "timeout";
683 goto err;
684 } else if (rc) {
685 reason = "SRST command error";
686 goto err;
689 sil24_read_tf(ap, 0, &tf);
690 *class = ata_dev_classify(&tf);
692 DPRINTK("EXIT, class=%u\n", *class);
693 return 0;
695 err:
696 ata_link_err(link, "softreset failed (%s)\n", reason);
697 return -EIO;
700 static int sil24_hardreset(struct ata_link *link, unsigned int *class,
701 unsigned long deadline)
703 struct ata_port *ap = link->ap;
704 void __iomem *port = sil24_port_base(ap);
705 struct sil24_port_priv *pp = ap->private_data;
706 int did_port_rst = 0;
707 const char *reason;
708 int tout_msec, rc;
709 u32 tmp;
711 retry:
712 /* Sometimes, DEV_RST is not enough to recover the controller.
713 * This happens often after PM DMA CS errata.
715 if (pp->do_port_rst) {
716 ata_port_warn(ap,
717 "controller in dubious state, performing PORT_RST\n");
719 writel(PORT_CS_PORT_RST, port + PORT_CTRL_STAT);
720 ata_msleep(ap, 10);
721 writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
722 ata_wait_register(ap, port + PORT_CTRL_STAT, PORT_CS_RDY, 0,
723 10, 5000);
725 /* restore port configuration */
726 sil24_config_port(ap);
727 sil24_config_pmp(ap, ap->nr_pmp_links);
729 pp->do_port_rst = 0;
730 did_port_rst = 1;
733 /* sil24 does the right thing(tm) without any protection */
734 sata_set_spd(link);
736 tout_msec = 100;
737 if (ata_link_online(link))
738 tout_msec = 5000;
740 writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT);
741 tmp = ata_wait_register(ap, port + PORT_CTRL_STAT,
742 PORT_CS_DEV_RST, PORT_CS_DEV_RST, 10,
743 tout_msec);
745 /* SStatus oscillates between zero and valid status after
746 * DEV_RST, debounce it.
748 rc = sata_link_debounce(link, sata_deb_timing_long, deadline);
749 if (rc) {
750 reason = "PHY debouncing failed";
751 goto err;
754 if (tmp & PORT_CS_DEV_RST) {
755 if (ata_link_offline(link))
756 return 0;
757 reason = "link not ready";
758 goto err;
761 /* Sil24 doesn't store signature FIS after hardreset, so we
762 * can't wait for BSY to clear. Some devices take a long time
763 * to get ready and those devices will choke if we don't wait
764 * for BSY clearance here. Tell libata to perform follow-up
765 * softreset.
767 return -EAGAIN;
769 err:
770 if (!did_port_rst) {
771 pp->do_port_rst = 1;
772 goto retry;
775 ata_link_err(link, "hardreset failed (%s)\n", reason);
776 return -EIO;
779 static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
780 struct sil24_sge *sge)
782 struct scatterlist *sg;
783 struct sil24_sge *last_sge = NULL;
784 unsigned int si;
786 for_each_sg(qc->sg, sg, qc->n_elem, si) {
787 sge->addr = cpu_to_le64(sg_dma_address(sg));
788 sge->cnt = cpu_to_le32(sg_dma_len(sg));
789 sge->flags = 0;
791 last_sge = sge;
792 sge++;
795 last_sge->flags = cpu_to_le32(SGE_TRM);
798 static int sil24_qc_defer(struct ata_queued_cmd *qc)
800 struct ata_link *link = qc->dev->link;
801 struct ata_port *ap = link->ap;
802 u8 prot = qc->tf.protocol;
805 * There is a bug in the chip:
806 * Port LRAM Causes the PRB/SGT Data to be Corrupted
807 * If the host issues a read request for LRAM and SActive registers
808 * while active commands are available in the port, PRB/SGT data in
809 * the LRAM can become corrupted. This issue applies only when
810 * reading from, but not writing to, the LRAM.
812 * Therefore, reading LRAM when there is no particular error [and
813 * other commands may be outstanding] is prohibited.
815 * To avoid this bug there are two situations where a command must run
816 * exclusive of any other commands on the port:
818 * - ATAPI commands which check the sense data
819 * - Passthrough ATA commands which always have ATA_QCFLAG_RESULT_TF
820 * set.
823 int is_excl = (ata_is_atapi(prot) ||
824 (qc->flags & ATA_QCFLAG_RESULT_TF));
826 if (unlikely(ap->excl_link)) {
827 if (link == ap->excl_link) {
828 if (ap->nr_active_links)
829 return ATA_DEFER_PORT;
830 qc->flags |= ATA_QCFLAG_CLEAR_EXCL;
831 } else
832 return ATA_DEFER_PORT;
833 } else if (unlikely(is_excl)) {
834 ap->excl_link = link;
835 if (ap->nr_active_links)
836 return ATA_DEFER_PORT;
837 qc->flags |= ATA_QCFLAG_CLEAR_EXCL;
840 return ata_std_qc_defer(qc);
843 static void sil24_qc_prep(struct ata_queued_cmd *qc)
845 struct ata_port *ap = qc->ap;
846 struct sil24_port_priv *pp = ap->private_data;
847 union sil24_cmd_block *cb;
848 struct sil24_prb *prb;
849 struct sil24_sge *sge;
850 u16 ctrl = 0;
852 cb = &pp->cmd_block[sil24_tag(qc->hw_tag)];
854 if (!ata_is_atapi(qc->tf.protocol)) {
855 prb = &cb->ata.prb;
856 sge = cb->ata.sge;
857 if (ata_is_data(qc->tf.protocol)) {
858 u16 prot = 0;
859 ctrl = PRB_CTRL_PROTOCOL;
860 if (ata_is_ncq(qc->tf.protocol))
861 prot |= PRB_PROT_NCQ;
862 if (qc->tf.flags & ATA_TFLAG_WRITE)
863 prot |= PRB_PROT_WRITE;
864 else
865 prot |= PRB_PROT_READ;
866 prb->prot = cpu_to_le16(prot);
868 } else {
869 prb = &cb->atapi.prb;
870 sge = cb->atapi.sge;
871 memset(cb->atapi.cdb, 0, sizeof(cb->atapi.cdb));
872 memcpy(cb->atapi.cdb, qc->cdb, qc->dev->cdb_len);
874 if (ata_is_data(qc->tf.protocol)) {
875 if (qc->tf.flags & ATA_TFLAG_WRITE)
876 ctrl = PRB_CTRL_PACKET_WRITE;
877 else
878 ctrl = PRB_CTRL_PACKET_READ;
882 prb->ctrl = cpu_to_le16(ctrl);
883 ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, prb->fis);
885 if (qc->flags & ATA_QCFLAG_DMAMAP)
886 sil24_fill_sg(qc, sge);
889 static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc)
891 struct ata_port *ap = qc->ap;
892 struct sil24_port_priv *pp = ap->private_data;
893 void __iomem *port = sil24_port_base(ap);
894 unsigned int tag = sil24_tag(qc->hw_tag);
895 dma_addr_t paddr;
896 void __iomem *activate;
898 paddr = pp->cmd_block_dma + tag * sizeof(*pp->cmd_block);
899 activate = port + PORT_CMD_ACTIVATE + tag * 8;
902 * The barrier is required to ensure that writes to cmd_block reach
903 * the memory before the write to PORT_CMD_ACTIVATE.
905 wmb();
906 writel((u32)paddr, activate);
907 writel((u64)paddr >> 32, activate + 4);
909 return 0;
912 static bool sil24_qc_fill_rtf(struct ata_queued_cmd *qc)
914 sil24_read_tf(qc->ap, qc->hw_tag, &qc->result_tf);
915 return true;
918 static void sil24_pmp_attach(struct ata_port *ap)
920 u32 *gscr = ap->link.device->gscr;
922 sil24_config_pmp(ap, 1);
923 sil24_init_port(ap);
925 if (sata_pmp_gscr_vendor(gscr) == 0x11ab &&
926 sata_pmp_gscr_devid(gscr) == 0x4140) {
927 ata_port_info(ap,
928 "disabling NCQ support due to sil24-mv4140 quirk\n");
929 ap->flags &= ~ATA_FLAG_NCQ;
933 static void sil24_pmp_detach(struct ata_port *ap)
935 sil24_init_port(ap);
936 sil24_config_pmp(ap, 0);
938 ap->flags |= ATA_FLAG_NCQ;
941 static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class,
942 unsigned long deadline)
944 int rc;
946 rc = sil24_init_port(link->ap);
947 if (rc) {
948 ata_link_err(link, "hardreset failed (port not ready)\n");
949 return rc;
952 return sata_std_hardreset(link, class, deadline);
955 static void sil24_freeze(struct ata_port *ap)
957 void __iomem *port = sil24_port_base(ap);
959 /* Port-wide IRQ mask in HOST_CTRL doesn't really work, clear
960 * PORT_IRQ_ENABLE instead.
962 writel(0xffff, port + PORT_IRQ_ENABLE_CLR);
965 static void sil24_thaw(struct ata_port *ap)
967 void __iomem *port = sil24_port_base(ap);
968 u32 tmp;
970 /* clear IRQ */
971 tmp = readl(port + PORT_IRQ_STAT);
972 writel(tmp, port + PORT_IRQ_STAT);
974 /* turn IRQ back on */
975 writel(DEF_PORT_IRQ, port + PORT_IRQ_ENABLE_SET);
978 static void sil24_error_intr(struct ata_port *ap)
980 void __iomem *port = sil24_port_base(ap);
981 struct sil24_port_priv *pp = ap->private_data;
982 struct ata_queued_cmd *qc = NULL;
983 struct ata_link *link;
984 struct ata_eh_info *ehi;
985 int abort = 0, freeze = 0;
986 u32 irq_stat;
988 /* on error, we need to clear IRQ explicitly */
989 irq_stat = readl(port + PORT_IRQ_STAT);
990 writel(irq_stat, port + PORT_IRQ_STAT);
992 /* first, analyze and record host port events */
993 link = &ap->link;
994 ehi = &link->eh_info;
995 ata_ehi_clear_desc(ehi);
997 ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat);
999 if (irq_stat & PORT_IRQ_SDB_NOTIFY) {
1000 ata_ehi_push_desc(ehi, "SDB notify");
1001 sata_async_notification(ap);
1004 if (irq_stat & (PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG)) {
1005 ata_ehi_hotplugged(ehi);
1006 ata_ehi_push_desc(ehi, "%s",
1007 irq_stat & PORT_IRQ_PHYRDY_CHG ?
1008 "PHY RDY changed" : "device exchanged");
1009 freeze = 1;
1012 if (irq_stat & PORT_IRQ_UNK_FIS) {
1013 ehi->err_mask |= AC_ERR_HSM;
1014 ehi->action |= ATA_EH_RESET;
1015 ata_ehi_push_desc(ehi, "unknown FIS");
1016 freeze = 1;
1019 /* deal with command error */
1020 if (irq_stat & PORT_IRQ_ERROR) {
1021 const struct sil24_cerr_info *ci = NULL;
1022 unsigned int err_mask = 0, action = 0;
1023 u32 context, cerr;
1024 int pmp;
1026 abort = 1;
1028 /* DMA Context Switch Failure in Port Multiplier Mode
1029 * errata. If we have active commands to 3 or more
1030 * devices, any error condition on active devices can
1031 * corrupt DMA context switching.
1033 if (ap->nr_active_links >= 3) {
1034 ehi->err_mask |= AC_ERR_OTHER;
1035 ehi->action |= ATA_EH_RESET;
1036 ata_ehi_push_desc(ehi, "PMP DMA CS errata");
1037 pp->do_port_rst = 1;
1038 freeze = 1;
1041 /* find out the offending link and qc */
1042 if (sata_pmp_attached(ap)) {
1043 context = readl(port + PORT_CONTEXT);
1044 pmp = (context >> 5) & 0xf;
1046 if (pmp < ap->nr_pmp_links) {
1047 link = &ap->pmp_link[pmp];
1048 ehi = &link->eh_info;
1049 qc = ata_qc_from_tag(ap, link->active_tag);
1051 ata_ehi_clear_desc(ehi);
1052 ata_ehi_push_desc(ehi, "irq_stat 0x%08x",
1053 irq_stat);
1054 } else {
1055 err_mask |= AC_ERR_HSM;
1056 action |= ATA_EH_RESET;
1057 freeze = 1;
1059 } else
1060 qc = ata_qc_from_tag(ap, link->active_tag);
1062 /* analyze CMD_ERR */
1063 cerr = readl(port + PORT_CMD_ERR);
1064 if (cerr < ARRAY_SIZE(sil24_cerr_db))
1065 ci = &sil24_cerr_db[cerr];
1067 if (ci && ci->desc) {
1068 err_mask |= ci->err_mask;
1069 action |= ci->action;
1070 if (action & ATA_EH_RESET)
1071 freeze = 1;
1072 ata_ehi_push_desc(ehi, "%s", ci->desc);
1073 } else {
1074 err_mask |= AC_ERR_OTHER;
1075 action |= ATA_EH_RESET;
1076 freeze = 1;
1077 ata_ehi_push_desc(ehi, "unknown command error %d",
1078 cerr);
1081 /* record error info */
1082 if (qc)
1083 qc->err_mask |= err_mask;
1084 else
1085 ehi->err_mask |= err_mask;
1087 ehi->action |= action;
1089 /* if PMP, resume */
1090 if (sata_pmp_attached(ap))
1091 writel(PORT_CS_PMP_RESUME, port + PORT_CTRL_STAT);
1094 /* freeze or abort */
1095 if (freeze)
1096 ata_port_freeze(ap);
1097 else if (abort) {
1098 if (qc)
1099 ata_link_abort(qc->dev->link);
1100 else
1101 ata_port_abort(ap);
1105 static inline void sil24_host_intr(struct ata_port *ap)
1107 void __iomem *port = sil24_port_base(ap);
1108 u32 slot_stat, qc_active;
1109 int rc;
1111 /* If PCIX_IRQ_WOC, there's an inherent race window between
1112 * clearing IRQ pending status and reading PORT_SLOT_STAT
1113 * which may cause spurious interrupts afterwards. This is
1114 * unavoidable and much better than losing interrupts which
1115 * happens if IRQ pending is cleared after reading
1116 * PORT_SLOT_STAT.
1118 if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC)
1119 writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT);
1121 slot_stat = readl(port + PORT_SLOT_STAT);
1123 if (unlikely(slot_stat & HOST_SSTAT_ATTN)) {
1124 sil24_error_intr(ap);
1125 return;
1128 qc_active = slot_stat & ~HOST_SSTAT_ATTN;
1129 rc = ata_qc_complete_multiple(ap, qc_active);
1130 if (rc > 0)
1131 return;
1132 if (rc < 0) {
1133 struct ata_eh_info *ehi = &ap->link.eh_info;
1134 ehi->err_mask |= AC_ERR_HSM;
1135 ehi->action |= ATA_EH_RESET;
1136 ata_port_freeze(ap);
1137 return;
1140 /* spurious interrupts are expected if PCIX_IRQ_WOC */
1141 if (!(ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) && ata_ratelimit())
1142 ata_port_info(ap,
1143 "spurious interrupt (slot_stat 0x%x active_tag %d sactive 0x%x)\n",
1144 slot_stat, ap->link.active_tag, ap->link.sactive);
1147 static irqreturn_t sil24_interrupt(int irq, void *dev_instance)
1149 struct ata_host *host = dev_instance;
1150 void __iomem *host_base = host->iomap[SIL24_HOST_BAR];
1151 unsigned handled = 0;
1152 u32 status;
1153 int i;
1155 status = readl(host_base + HOST_IRQ_STAT);
1157 if (status == 0xffffffff) {
1158 dev_err(host->dev, "IRQ status == 0xffffffff, "
1159 "PCI fault or device removal?\n");
1160 goto out;
1163 if (!(status & IRQ_STAT_4PORTS))
1164 goto out;
1166 spin_lock(&host->lock);
1168 for (i = 0; i < host->n_ports; i++)
1169 if (status & (1 << i)) {
1170 sil24_host_intr(host->ports[i]);
1171 handled++;
1174 spin_unlock(&host->lock);
1175 out:
1176 return IRQ_RETVAL(handled);
1179 static void sil24_error_handler(struct ata_port *ap)
1181 struct sil24_port_priv *pp = ap->private_data;
1183 if (sil24_init_port(ap))
1184 ata_eh_freeze_port(ap);
1186 sata_pmp_error_handler(ap);
1188 pp->do_port_rst = 0;
1191 static void sil24_post_internal_cmd(struct ata_queued_cmd *qc)
1193 struct ata_port *ap = qc->ap;
1195 /* make DMA engine forget about the failed command */
1196 if ((qc->flags & ATA_QCFLAG_FAILED) && sil24_init_port(ap))
1197 ata_eh_freeze_port(ap);
1200 static int sil24_port_start(struct ata_port *ap)
1202 struct device *dev = ap->host->dev;
1203 struct sil24_port_priv *pp;
1204 union sil24_cmd_block *cb;
1205 size_t cb_size = sizeof(*cb) * SIL24_MAX_CMDS;
1206 dma_addr_t cb_dma;
1208 pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
1209 if (!pp)
1210 return -ENOMEM;
1212 cb = dmam_alloc_coherent(dev, cb_size, &cb_dma, GFP_KERNEL);
1213 if (!cb)
1214 return -ENOMEM;
1215 memset(cb, 0, cb_size);
1217 pp->cmd_block = cb;
1218 pp->cmd_block_dma = cb_dma;
1220 ap->private_data = pp;
1222 ata_port_pbar_desc(ap, SIL24_HOST_BAR, -1, "host");
1223 ata_port_pbar_desc(ap, SIL24_PORT_BAR, sil24_port_offset(ap), "port");
1225 return 0;
1228 static void sil24_init_controller(struct ata_host *host)
1230 void __iomem *host_base = host->iomap[SIL24_HOST_BAR];
1231 u32 tmp;
1232 int i;
1234 /* GPIO off */
1235 writel(0, host_base + HOST_FLASH_CMD);
1237 /* clear global reset & mask interrupts during initialization */
1238 writel(0, host_base + HOST_CTRL);
1240 /* init ports */
1241 for (i = 0; i < host->n_ports; i++) {
1242 struct ata_port *ap = host->ports[i];
1243 void __iomem *port = sil24_port_base(ap);
1246 /* Initial PHY setting */
1247 writel(0x20c, port + PORT_PHY_CFG);
1249 /* Clear port RST */
1250 tmp = readl(port + PORT_CTRL_STAT);
1251 if (tmp & PORT_CS_PORT_RST) {
1252 writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
1253 tmp = ata_wait_register(NULL, port + PORT_CTRL_STAT,
1254 PORT_CS_PORT_RST,
1255 PORT_CS_PORT_RST, 10, 100);
1256 if (tmp & PORT_CS_PORT_RST)
1257 dev_err(host->dev,
1258 "failed to clear port RST\n");
1261 /* configure port */
1262 sil24_config_port(ap);
1265 /* Turn on interrupts */
1266 writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL);
1269 static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
1271 extern int __MARKER__sil24_cmd_block_is_sized_wrongly;
1272 struct ata_port_info pi = sil24_port_info[ent->driver_data];
1273 const struct ata_port_info *ppi[] = { &pi, NULL };
1274 void __iomem * const *iomap;
1275 struct ata_host *host;
1276 int rc;
1277 u32 tmp;
1279 /* cause link error if sil24_cmd_block is sized wrongly */
1280 if (sizeof(union sil24_cmd_block) != PAGE_SIZE)
1281 __MARKER__sil24_cmd_block_is_sized_wrongly = 1;
1283 ata_print_version_once(&pdev->dev, DRV_VERSION);
1285 /* acquire resources */
1286 rc = pcim_enable_device(pdev);
1287 if (rc)
1288 return rc;
1290 rc = pcim_iomap_regions(pdev,
1291 (1 << SIL24_HOST_BAR) | (1 << SIL24_PORT_BAR),
1292 DRV_NAME);
1293 if (rc)
1294 return rc;
1295 iomap = pcim_iomap_table(pdev);
1297 /* apply workaround for completion IRQ loss on PCI-X errata */
1298 if (pi.flags & SIL24_FLAG_PCIX_IRQ_WOC) {
1299 tmp = readl(iomap[SIL24_HOST_BAR] + HOST_CTRL);
1300 if (tmp & (HOST_CTRL_TRDY | HOST_CTRL_STOP | HOST_CTRL_DEVSEL))
1301 dev_info(&pdev->dev,
1302 "Applying completion IRQ loss on PCI-X errata fix\n");
1303 else
1304 pi.flags &= ~SIL24_FLAG_PCIX_IRQ_WOC;
1307 /* allocate and fill host */
1308 host = ata_host_alloc_pinfo(&pdev->dev, ppi,
1309 SIL24_FLAG2NPORTS(ppi[0]->flags));
1310 if (!host)
1311 return -ENOMEM;
1312 host->iomap = iomap;
1314 /* configure and activate the device */
1315 if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
1316 rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
1317 if (rc) {
1318 rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
1319 if (rc) {
1320 dev_err(&pdev->dev,
1321 "64-bit DMA enable failed\n");
1322 return rc;
1325 } else {
1326 rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
1327 if (rc) {
1328 dev_err(&pdev->dev, "32-bit DMA enable failed\n");
1329 return rc;
1331 rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
1332 if (rc) {
1333 dev_err(&pdev->dev,
1334 "32-bit consistent DMA enable failed\n");
1335 return rc;
1339 /* Set max read request size to 4096. This slightly increases
1340 * write throughput for pci-e variants.
1342 pcie_set_readrq(pdev, 4096);
1344 sil24_init_controller(host);
1346 if (sata_sil24_msi && !pci_enable_msi(pdev)) {
1347 dev_info(&pdev->dev, "Using MSI\n");
1348 pci_intx(pdev, 0);
1351 pci_set_master(pdev);
1352 return ata_host_activate(host, pdev->irq, sil24_interrupt, IRQF_SHARED,
1353 &sil24_sht);
1356 #ifdef CONFIG_PM_SLEEP
1357 static int sil24_pci_device_resume(struct pci_dev *pdev)
1359 struct ata_host *host = pci_get_drvdata(pdev);
1360 void __iomem *host_base = host->iomap[SIL24_HOST_BAR];
1361 int rc;
1363 rc = ata_pci_device_do_resume(pdev);
1364 if (rc)
1365 return rc;
1367 if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND)
1368 writel(HOST_CTRL_GLOBAL_RST, host_base + HOST_CTRL);
1370 sil24_init_controller(host);
1372 ata_host_resume(host);
1374 return 0;
1376 #endif
1378 #ifdef CONFIG_PM
1379 static int sil24_port_resume(struct ata_port *ap)
1381 sil24_config_pmp(ap, ap->nr_pmp_links);
1382 return 0;
1384 #endif
1386 module_pci_driver(sil24_pci_driver);
1388 MODULE_AUTHOR("Tejun Heo");
1389 MODULE_DESCRIPTION("Silicon Image 3124/3132 SATA low-level driver");
1390 MODULE_LICENSE("GPL");
1391 MODULE_DEVICE_TABLE(pci, sil24_pci_tbl);