2 pd.c (c) 1997-8 Grant R. Guenther <grant@torque.net>
3 Under the terms of the GNU General Public License.
5 This is the high-level driver for parallel port IDE hard
6 drives based on chips supported by the paride module.
8 By default, the driver will autoprobe for a single parallel
9 port IDE drive, but if their individual parameters are
10 specified, the driver can handle up to 4 drives.
12 The behaviour of the pd driver can be altered by setting
13 some parameters from the insmod command line. The following
14 parameters are adjustable:
16 drive0 These four arguments can be arrays of
17 drive1 1-8 integers as follows:
19 drive3 <prt>,<pro>,<uni>,<mod>,<geo>,<sby>,<dly>,<slv>
23 <prt> is the base of the parallel port address for
24 the corresponding drive. (required)
26 <pro> is the protocol number for the adapter that
27 supports this drive. These numbers are
28 logged by 'paride' when the protocol modules
29 are initialised. (0 if not given)
31 <uni> for those adapters that support chained
32 devices, this is the unit selector for the
33 chain of devices on the given port. It should
34 be zero for devices that don't support chaining.
37 <mod> this can be -1 to choose the best mode, or one
38 of the mode numbers supported by the adapter.
41 <geo> this defaults to 0 to indicate that the driver
42 should use the CHS geometry provided by the drive
43 itself. If set to 1, the driver will provide
44 a logical geometry with 64 heads and 32 sectors
45 per track, to be consistent with most SCSI
46 drivers. (0 if not given)
48 <sby> set this to zero to disable the power saving
49 standby mode, if needed. (1 if not given)
51 <dly> some parallel ports require the driver to
52 go more slowly. -1 sets a default value that
53 should work with the chosen protocol. Otherwise,
54 set this to a small integer, the larger it is
55 the slower the port i/o. In some cases, setting
56 this to zero will speed up the device. (default -1)
58 <slv> IDE disks can be jumpered to master or slave.
59 Set this to 0 to choose the master drive, 1 to
60 choose the slave, -1 (the default) to choose the
64 major You may use this parameter to override the
65 default major number (45) that this driver
66 will use. Be sure to change the device
69 name This parameter is a character string that
70 contains the name the kernel will use for this
71 device (in /proc output, for instance).
74 cluster The driver will attempt to aggregate requests
75 for adjacent blocks into larger multi-block
76 clusters. The maximum cluster size (in 512
77 byte sectors) is set with this parameter.
80 verbose This parameter controls the amount of logging
81 that the driver will do. Set it to 0 for
82 normal operation, 1 to see autoprobe progress
83 messages, or 2 to see additional debugging
86 nice This parameter controls the driver's use of
87 idle CPU time, at the expense of some speed.
89 If this driver is built into the kernel, you can use kernel
90 the following command line parameters, with the same values
91 as the corresponding module parameters listed above:
100 In addition, you can use the parameter pd.disable to disable
107 1.01 GRG 1997.01.24 Restored pd_reset()
109 1.02 GRG 1998.05.06 SMP spinlock changes,
111 1.03 GRG 1998.06.16 Eliminate an Ugh.
112 1.04 GRG 1998.08.15 Extra debugging, use HZ in loop timing
113 1.05 GRG 1998.09.24 Added jumbo support
117 #define PD_VERSION "1.05"
122 /* Here are things one can override from the insmod command.
123 Most are autoprobed by paride unless set here. Verbose is off
127 #include <linux/types.h>
129 static int verbose
= 0;
130 static int major
= PD_MAJOR
;
131 static char *name
= PD_NAME
;
132 static int cluster
= 64;
134 static int disable
= 0;
136 static int drive0
[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
137 static int drive1
[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
138 static int drive2
[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
139 static int drive3
[8] = { 0, 0, 0, -1, 0, 1, -1, -1 };
141 static int (*drives
[4])[8] = {&drive0
, &drive1
, &drive2
, &drive3
};
143 enum {D_PRT
, D_PRO
, D_UNI
, D_MOD
, D_GEO
, D_SBY
, D_DLY
, D_SLV
};
145 /* end of parameters */
147 #include <linux/init.h>
148 #include <linux/module.h>
149 #include <linux/gfp.h>
150 #include <linux/fs.h>
151 #include <linux/delay.h>
152 #include <linux/hdreg.h>
153 #include <linux/cdrom.h> /* for the eject ioctl */
154 #include <linux/blkdev.h>
155 #include <linux/blkpg.h>
156 #include <linux/kernel.h>
157 #include <linux/mutex.h>
158 #include <linux/uaccess.h>
159 #include <linux/workqueue.h>
161 static DEFINE_MUTEX(pd_mutex
);
162 static DEFINE_SPINLOCK(pd_lock
);
164 module_param(verbose
, int, 0);
165 module_param(major
, int, 0);
166 module_param(name
, charp
, 0);
167 module_param(cluster
, int, 0);
168 module_param(nice
, int, 0);
169 module_param_array(drive0
, int, NULL
, 0);
170 module_param_array(drive1
, int, NULL
, 0);
171 module_param_array(drive2
, int, NULL
, 0);
172 module_param_array(drive3
, int, NULL
, 0);
178 /* numbers for "SCSI" geometry */
180 #define PD_LOG_HEADS 64
181 #define PD_LOG_SECTS 32
186 #define PD_MAX_RETRIES 5
187 #define PD_TMO 800 /* interrupt timeout in jiffies */
188 #define PD_SPIN_DEL 50 /* spin delay in micro-seconds */
190 #define PD_SPIN (1000000*PD_TMO)/(HZ*PD_SPIN_DEL)
192 #define STAT_ERR 0x00001
193 #define STAT_INDEX 0x00002
194 #define STAT_ECC 0x00004
195 #define STAT_DRQ 0x00008
196 #define STAT_SEEK 0x00010
197 #define STAT_WRERR 0x00020
198 #define STAT_READY 0x00040
199 #define STAT_BUSY 0x00080
201 #define ERR_AMNF 0x00100
202 #define ERR_TK0NF 0x00200
203 #define ERR_ABRT 0x00400
204 #define ERR_MCR 0x00800
205 #define ERR_IDNF 0x01000
206 #define ERR_MC 0x02000
207 #define ERR_UNC 0x04000
208 #define ERR_TMO 0x10000
210 #define IDE_READ 0x20
211 #define IDE_WRITE 0x30
212 #define IDE_READ_VRFY 0x40
213 #define IDE_INIT_DEV_PARMS 0x91
214 #define IDE_STANDBY 0x96
215 #define IDE_ACKCHANGE 0xdb
216 #define IDE_DOORLOCK 0xde
217 #define IDE_DOORUNLOCK 0xdf
218 #define IDE_IDENTIFY 0xec
219 #define IDE_EJECT 0xed
224 struct pi_adapter pia
; /* interface to paride layer */
225 struct pi_adapter
*pi
;
226 int access
; /* count of active opens ... */
227 int capacity
; /* Size of this volume in sectors */
228 int heads
; /* physical geometry */
232 int drive
; /* master=0 slave=1 */
233 int changed
; /* Have we seen a disk change ? */
234 int removable
; /* removable media device ? */
237 char name
[PD_NAMELEN
]; /* pda, pdb, etc ... */
241 static struct pd_unit pd
[PD_UNITS
];
243 static char pd_scratch
[512]; /* scratch block buffer */
245 static char *pd_errs
[17] = { "ERR", "INDEX", "ECC", "DRQ", "SEEK", "WRERR",
246 "READY", "BUSY", "AMNF", "TK0NF", "ABRT", "MCR",
247 "IDNF", "MC", "UNC", "???", "TMO"
250 static void *par_drv
; /* reference of parport driver */
252 static inline int status_reg(struct pd_unit
*disk
)
254 return pi_read_regr(disk
->pi
, 1, 6);
257 static inline int read_reg(struct pd_unit
*disk
, int reg
)
259 return pi_read_regr(disk
->pi
, 0, reg
);
262 static inline void write_status(struct pd_unit
*disk
, int val
)
264 pi_write_regr(disk
->pi
, 1, 6, val
);
267 static inline void write_reg(struct pd_unit
*disk
, int reg
, int val
)
269 pi_write_regr(disk
->pi
, 0, reg
, val
);
272 static inline u8
DRIVE(struct pd_unit
*disk
)
274 return 0xa0+0x10*disk
->drive
;
277 /* ide command interface */
279 static void pd_print_error(struct pd_unit
*disk
, char *msg
, int status
)
283 printk("%s: %s: status = 0x%x =", disk
->name
, msg
, status
);
284 for (i
= 0; i
< ARRAY_SIZE(pd_errs
); i
++)
285 if (status
& (1 << i
))
286 printk(" %s", pd_errs
[i
]);
290 static void pd_reset(struct pd_unit
*disk
)
291 { /* called only for MASTER drive */
292 write_status(disk
, 4);
294 write_status(disk
, 0);
298 #define DBMSG(msg) ((verbose>1)?(msg):NULL)
300 static int pd_wait_for(struct pd_unit
*disk
, int w
, char *msg
)
305 while (k
< PD_SPIN
) {
306 r
= status_reg(disk
);
308 if (((r
& w
) == w
) && !(r
& STAT_BUSY
))
312 e
= (read_reg(disk
, 1) << 8) + read_reg(disk
, 7);
315 if ((e
& (STAT_ERR
| ERR_TMO
)) && (msg
!= NULL
))
316 pd_print_error(disk
, msg
, e
);
320 static void pd_send_command(struct pd_unit
*disk
, int n
, int s
, int h
, int c0
, int c1
, int func
)
322 write_reg(disk
, 6, DRIVE(disk
) + h
);
323 write_reg(disk
, 1, 0); /* the IDE task file */
324 write_reg(disk
, 2, n
);
325 write_reg(disk
, 3, s
);
326 write_reg(disk
, 4, c0
);
327 write_reg(disk
, 5, c1
);
328 write_reg(disk
, 7, func
);
333 static void pd_ide_command(struct pd_unit
*disk
, int func
, int block
, int count
)
339 c0
= (block
>>= 8) & 255;
340 c1
= (block
>>= 8) & 255;
341 h
= ((block
>>= 8) & 15) + 0x40;
343 s
= (block
% disk
->sectors
) + 1;
344 h
= (block
/= disk
->sectors
) % disk
->heads
;
345 c0
= (block
/= disk
->heads
) % 256;
348 pd_send_command(disk
, count
, s
, h
, c0
, c1
, func
);
351 /* The i/o request engine */
353 enum action
{Fail
= 0, Ok
= 1, Hold
, Wait
};
355 static struct request
*pd_req
; /* current request */
356 static enum action (*phase
)(void);
358 static void run_fsm(void);
360 static void ps_tq_int(struct work_struct
*work
);
362 static DECLARE_DELAYED_WORK(fsm_tq
, ps_tq_int
);
364 static void schedule_fsm(void)
367 schedule_delayed_work(&fsm_tq
, 0);
369 schedule_delayed_work(&fsm_tq
, nice
-1);
372 static void ps_tq_int(struct work_struct
*work
)
377 static enum action
do_pd_io_start(void);
378 static enum action
pd_special(void);
379 static enum action
do_pd_read_start(void);
380 static enum action
do_pd_write_start(void);
381 static enum action
do_pd_read_drq(void);
382 static enum action
do_pd_write_done(void);
385 static int pd_claimed
;
387 static struct pd_unit
*pd_current
; /* current request's drive */
388 static PIA
*pi_current
; /* current request's PIA */
390 static int set_next_request(void)
392 struct gendisk
*disk
;
393 struct request_queue
*q
;
394 int old_pos
= pd_queue
;
397 disk
= pd
[pd_queue
].gd
;
398 q
= disk
? disk
->queue
: NULL
;
399 if (++pd_queue
== PD_UNITS
)
402 pd_req
= blk_fetch_request(q
);
406 } while (pd_queue
!= old_pos
);
408 return pd_req
!= NULL
;
411 static void run_fsm(void)
415 unsigned long saved_flags
;
419 pd_current
= pd_req
->rq_disk
->private_data
;
420 pi_current
= pd_current
->pi
;
421 phase
= do_pd_io_start
;
424 switch (pd_claimed
) {
427 if (!pi_schedule_claimed(pi_current
, run_fsm
))
432 pi_current
->proto
->connect(pi_current
);
435 switch(res
= phase()) {
437 pi_disconnect(pi_current
);
440 spin_lock_irqsave(&pd_lock
, saved_flags
);
441 if (!__blk_end_request_cur(pd_req
,
442 res
== Ok
? 0 : BLK_STS_IOERR
)) {
443 if (!set_next_request())
446 spin_unlock_irqrestore(&pd_lock
, saved_flags
);
454 pi_disconnect(pi_current
);
460 static int pd_retries
= 0; /* i/o error retry count */
461 static int pd_block
; /* address of next requested block */
462 static int pd_count
; /* number of blocks still to do */
463 static int pd_run
; /* sectors in current cluster */
464 static char *pd_buf
; /* buffer for request in progress */
466 static enum action
do_pd_io_start(void)
468 switch (req_op(pd_req
)) {
474 pd_block
= blk_rq_pos(pd_req
);
475 pd_count
= blk_rq_cur_sectors(pd_req
);
476 if (pd_block
+ pd_count
> get_capacity(pd_req
->rq_disk
))
478 pd_run
= blk_rq_sectors(pd_req
);
479 pd_buf
= bio_data(pd_req
->bio
);
481 if (req_op(pd_req
) == REQ_OP_READ
)
482 return do_pd_read_start();
484 return do_pd_write_start();
489 static enum action
pd_special(void)
491 enum action (*func
)(struct pd_unit
*) = pd_req
->special
;
492 return func(pd_current
);
495 static int pd_next_buf(void)
497 unsigned long saved_flags
;
507 spin_lock_irqsave(&pd_lock
, saved_flags
);
508 __blk_end_request_cur(pd_req
, 0);
509 pd_count
= blk_rq_cur_sectors(pd_req
);
510 pd_buf
= bio_data(pd_req
->bio
);
511 spin_unlock_irqrestore(&pd_lock
, saved_flags
);
515 static unsigned long pd_timeout
;
517 static enum action
do_pd_read_start(void)
519 if (pd_wait_for(pd_current
, STAT_READY
, "do_pd_read") & STAT_ERR
) {
520 if (pd_retries
< PD_MAX_RETRIES
) {
526 pd_ide_command(pd_current
, IDE_READ
, pd_block
, pd_run
);
527 phase
= do_pd_read_drq
;
528 pd_timeout
= jiffies
+ PD_TMO
;
532 static enum action
do_pd_write_start(void)
534 if (pd_wait_for(pd_current
, STAT_READY
, "do_pd_write") & STAT_ERR
) {
535 if (pd_retries
< PD_MAX_RETRIES
) {
541 pd_ide_command(pd_current
, IDE_WRITE
, pd_block
, pd_run
);
543 if (pd_wait_for(pd_current
, STAT_DRQ
, "do_pd_write_drq") & STAT_ERR
) {
544 if (pd_retries
< PD_MAX_RETRIES
) {
550 pi_write_block(pd_current
->pi
, pd_buf
, 512);
554 phase
= do_pd_write_done
;
555 pd_timeout
= jiffies
+ PD_TMO
;
559 static inline int pd_ready(void)
561 return !(status_reg(pd_current
) & STAT_BUSY
);
564 static enum action
do_pd_read_drq(void)
566 if (!pd_ready() && !time_after_eq(jiffies
, pd_timeout
))
570 if (pd_wait_for(pd_current
, STAT_DRQ
, "do_pd_read_drq") & STAT_ERR
) {
571 if (pd_retries
< PD_MAX_RETRIES
) {
573 phase
= do_pd_read_start
;
578 pi_read_block(pd_current
->pi
, pd_buf
, 512);
585 static enum action
do_pd_write_done(void)
587 if (!pd_ready() && !time_after_eq(jiffies
, pd_timeout
))
590 if (pd_wait_for(pd_current
, STAT_READY
, "do_pd_write_done") & STAT_ERR
) {
591 if (pd_retries
< PD_MAX_RETRIES
) {
593 phase
= do_pd_write_start
;
601 /* special io requests */
603 /* According to the ATA standard, the default CHS geometry should be
604 available following a reset. Some Western Digital drives come up
605 in a mode where only LBA addresses are accepted until the device
606 parameters are initialised.
609 static void pd_init_dev_parms(struct pd_unit
*disk
)
611 pd_wait_for(disk
, 0, DBMSG("before init_dev_parms"));
612 pd_send_command(disk
, disk
->sectors
, 0, disk
->heads
- 1, 0, 0,
615 pd_wait_for(disk
, 0, "Initialise device parameters");
618 static enum action
pd_door_lock(struct pd_unit
*disk
)
620 if (!(pd_wait_for(disk
, STAT_READY
, "Lock") & STAT_ERR
)) {
621 pd_send_command(disk
, 1, 0, 0, 0, 0, IDE_DOORLOCK
);
622 pd_wait_for(disk
, STAT_READY
, "Lock done");
627 static enum action
pd_door_unlock(struct pd_unit
*disk
)
629 if (!(pd_wait_for(disk
, STAT_READY
, "Lock") & STAT_ERR
)) {
630 pd_send_command(disk
, 1, 0, 0, 0, 0, IDE_DOORUNLOCK
);
631 pd_wait_for(disk
, STAT_READY
, "Lock done");
636 static enum action
pd_eject(struct pd_unit
*disk
)
638 pd_wait_for(disk
, 0, DBMSG("before unlock on eject"));
639 pd_send_command(disk
, 1, 0, 0, 0, 0, IDE_DOORUNLOCK
);
640 pd_wait_for(disk
, 0, DBMSG("after unlock on eject"));
641 pd_wait_for(disk
, 0, DBMSG("before eject"));
642 pd_send_command(disk
, 0, 0, 0, 0, 0, IDE_EJECT
);
643 pd_wait_for(disk
, 0, DBMSG("after eject"));
647 static enum action
pd_media_check(struct pd_unit
*disk
)
649 int r
= pd_wait_for(disk
, STAT_READY
, DBMSG("before media_check"));
650 if (!(r
& STAT_ERR
)) {
651 pd_send_command(disk
, 1, 1, 0, 0, 0, IDE_READ_VRFY
);
652 r
= pd_wait_for(disk
, STAT_READY
, DBMSG("RDY after READ_VRFY"));
654 disk
->changed
= 1; /* say changed if other error */
657 pd_send_command(disk
, 1, 0, 0, 0, 0, IDE_ACKCHANGE
);
658 pd_wait_for(disk
, STAT_READY
, DBMSG("RDY after ACKCHANGE"));
659 pd_send_command(disk
, 1, 1, 0, 0, 0, IDE_READ_VRFY
);
660 r
= pd_wait_for(disk
, STAT_READY
, DBMSG("RDY after VRFY"));
665 static void pd_standby_off(struct pd_unit
*disk
)
667 pd_wait_for(disk
, 0, DBMSG("before STANDBY"));
668 pd_send_command(disk
, 0, 0, 0, 0, 0, IDE_STANDBY
);
669 pd_wait_for(disk
, 0, DBMSG("after STANDBY"));
672 static enum action
pd_identify(struct pd_unit
*disk
)
675 char id
[PD_ID_LEN
+ 1];
677 /* WARNING: here there may be dragons. reset() applies to both drives,
678 but we call it only on probing the MASTER. This should allow most
679 common configurations to work, but be warned that a reset can clear
680 settings on the SLAVE drive.
683 if (disk
->drive
== 0)
686 write_reg(disk
, 6, DRIVE(disk
));
687 pd_wait_for(disk
, 0, DBMSG("before IDENT"));
688 pd_send_command(disk
, 1, 0, 0, 0, 0, IDE_IDENTIFY
);
690 if (pd_wait_for(disk
, STAT_DRQ
, DBMSG("IDENT DRQ")) & STAT_ERR
)
692 pi_read_block(disk
->pi
, pd_scratch
, 512);
693 disk
->can_lba
= pd_scratch
[99] & 2;
694 disk
->sectors
= le16_to_cpu(*(__le16
*) (pd_scratch
+ 12));
695 disk
->heads
= le16_to_cpu(*(__le16
*) (pd_scratch
+ 6));
696 disk
->cylinders
= le16_to_cpu(*(__le16
*) (pd_scratch
+ 2));
698 disk
->capacity
= le32_to_cpu(*(__le32
*) (pd_scratch
+ 120));
700 disk
->capacity
= disk
->sectors
* disk
->heads
* disk
->cylinders
;
702 for (j
= 0; j
< PD_ID_LEN
; j
++)
703 id
[j
^ 1] = pd_scratch
[j
+ PD_ID_OFF
];
705 while ((j
>= 0) && (id
[j
] <= 0x20))
710 disk
->removable
= pd_scratch
[0] & 0x80;
712 printk("%s: %s, %s, %d blocks [%dM], (%d/%d/%d), %s media\n",
714 disk
->drive
? "slave" : "master",
715 disk
->capacity
, disk
->capacity
/ 2048,
716 disk
->cylinders
, disk
->heads
, disk
->sectors
,
717 disk
->removable
? "removable" : "fixed");
720 pd_init_dev_parms(disk
);
722 pd_standby_off(disk
);
727 /* end of io request engine */
729 static void do_pd_request(struct request_queue
* q
)
733 pd_req
= blk_fetch_request(q
);
740 static int pd_special_command(struct pd_unit
*disk
,
741 enum action (*func
)(struct pd_unit
*disk
))
745 rq
= blk_get_request(disk
->gd
->queue
, REQ_OP_DRV_IN
, 0);
750 blk_execute_rq(disk
->gd
->queue
, disk
->gd
, rq
, 0);
755 /* kernel glue structures */
757 static int pd_open(struct block_device
*bdev
, fmode_t mode
)
759 struct pd_unit
*disk
= bdev
->bd_disk
->private_data
;
761 mutex_lock(&pd_mutex
);
764 if (disk
->removable
) {
765 pd_special_command(disk
, pd_media_check
);
766 pd_special_command(disk
, pd_door_lock
);
768 mutex_unlock(&pd_mutex
);
772 static int pd_getgeo(struct block_device
*bdev
, struct hd_geometry
*geo
)
774 struct pd_unit
*disk
= bdev
->bd_disk
->private_data
;
776 if (disk
->alt_geom
) {
777 geo
->heads
= PD_LOG_HEADS
;
778 geo
->sectors
= PD_LOG_SECTS
;
779 geo
->cylinders
= disk
->capacity
/ (geo
->heads
* geo
->sectors
);
781 geo
->heads
= disk
->heads
;
782 geo
->sectors
= disk
->sectors
;
783 geo
->cylinders
= disk
->cylinders
;
789 static int pd_ioctl(struct block_device
*bdev
, fmode_t mode
,
790 unsigned int cmd
, unsigned long arg
)
792 struct pd_unit
*disk
= bdev
->bd_disk
->private_data
;
796 mutex_lock(&pd_mutex
);
797 if (disk
->access
== 1)
798 pd_special_command(disk
, pd_eject
);
799 mutex_unlock(&pd_mutex
);
806 static void pd_release(struct gendisk
*p
, fmode_t mode
)
808 struct pd_unit
*disk
= p
->private_data
;
810 mutex_lock(&pd_mutex
);
811 if (!--disk
->access
&& disk
->removable
)
812 pd_special_command(disk
, pd_door_unlock
);
813 mutex_unlock(&pd_mutex
);
816 static unsigned int pd_check_events(struct gendisk
*p
, unsigned int clearing
)
818 struct pd_unit
*disk
= p
->private_data
;
820 if (!disk
->removable
)
822 pd_special_command(disk
, pd_media_check
);
825 return r
? DISK_EVENT_MEDIA_CHANGE
: 0;
828 static int pd_revalidate(struct gendisk
*p
)
830 struct pd_unit
*disk
= p
->private_data
;
831 if (pd_special_command(disk
, pd_identify
) == 0)
832 set_capacity(p
, disk
->capacity
);
838 static const struct block_device_operations pd_fops
= {
839 .owner
= THIS_MODULE
,
841 .release
= pd_release
,
844 .check_events
= pd_check_events
,
845 .revalidate_disk
= pd_revalidate
850 static void pd_probe_drive(struct pd_unit
*disk
)
852 struct gendisk
*p
= alloc_disk(1 << PD_BITS
);
855 strcpy(p
->disk_name
, disk
->name
);
858 p
->first_minor
= (disk
- pd
) << PD_BITS
;
860 p
->private_data
= disk
;
861 p
->queue
= blk_init_queue(do_pd_request
, &pd_lock
);
867 blk_queue_max_hw_sectors(p
->queue
, cluster
);
868 blk_queue_bounce_limit(p
->queue
, BLK_BOUNCE_HIGH
);
870 if (disk
->drive
== -1) {
871 for (disk
->drive
= 0; disk
->drive
<= 1; disk
->drive
++)
872 if (pd_special_command(disk
, pd_identify
) == 0)
874 } else if (pd_special_command(disk
, pd_identify
) == 0)
880 static int pd_detect(void)
882 int found
= 0, unit
, pd_drive_count
= 0;
883 struct pd_unit
*disk
;
885 for (unit
= 0; unit
< PD_UNITS
; unit
++) {
886 int *parm
= *drives
[unit
];
887 struct pd_unit
*disk
= pd
+ unit
;
888 disk
->pi
= &disk
->pia
;
892 disk
->drive
= parm
[D_SLV
];
893 snprintf(disk
->name
, PD_NAMELEN
, "%s%c", name
, 'a'+unit
);
894 disk
->alt_geom
= parm
[D_GEO
];
895 disk
->standby
= parm
[D_SBY
];
900 par_drv
= pi_register_driver(name
);
902 pr_err("failed to register %s driver\n", name
);
906 if (pd_drive_count
== 0) { /* nothing spec'd - so autoprobe for 1 */
908 if (pi_init(disk
->pi
, 1, -1, -1, -1, -1, -1, pd_scratch
,
909 PI_PD
, verbose
, disk
->name
)) {
910 pd_probe_drive(disk
);
912 pi_release(disk
->pi
);
916 for (unit
= 0, disk
= pd
; unit
< PD_UNITS
; unit
++, disk
++) {
917 int *parm
= *drives
[unit
];
920 if (pi_init(disk
->pi
, 0, parm
[D_PRT
], parm
[D_MOD
],
921 parm
[D_UNI
], parm
[D_PRO
], parm
[D_DLY
],
922 pd_scratch
, PI_PD
, verbose
, disk
->name
)) {
923 pd_probe_drive(disk
);
925 pi_release(disk
->pi
);
929 for (unit
= 0, disk
= pd
; unit
< PD_UNITS
; unit
++, disk
++) {
931 set_capacity(disk
->gd
, disk
->capacity
);
937 printk("%s: no valid drive found\n", name
);
938 pi_unregister_driver(par_drv
);
943 static int __init
pd_init(void)
948 if (register_blkdev(major
, name
))
951 printk("%s: %s version %s, major %d, cluster %d, nice %d\n",
952 name
, name
, PD_VERSION
, major
, cluster
, nice
);
959 unregister_blkdev(major
, name
);
964 static void __exit
pd_exit(void)
966 struct pd_unit
*disk
;
968 unregister_blkdev(major
, name
);
969 for (unit
= 0, disk
= pd
; unit
< PD_UNITS
; unit
++, disk
++) {
970 struct gendisk
*p
= disk
->gd
;
974 blk_cleanup_queue(p
->queue
);
976 pi_release(disk
->pi
);
981 MODULE_LICENSE("GPL");