drivers/hwmon/adm1021.c

   1 /*
   2  * adm1021.c - Part of lm_sensors, Linux kernel modules for hardware
   3  *             monitoring
   4  * Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl> and
   5  *                           Philip Edelbrock <phil@netroedge.com>
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation; either version 2 of the License, or
  10  * (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  20  */
  21
  22 #include <linux/module.h>
  23 #include <linux/init.h>
  24 #include <linux/slab.h>
  25 #include <linux/jiffies.h>
  26 #include <linux/i2c.h>
  27 #include <linux/hwmon.h>
  28 #include <linux/hwmon-sysfs.h>
  29 #include <linux/err.h>
  30 #include <linux/mutex.h>
  31
  32
  33 /* Addresses to scan */
  34 static const unsigned short normal_i2c[] = {
  35         0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };
  36
  37 enum chips {
  38         adm1021, adm1023, max1617, max1617a, thmc10, lm84, gl523sm, mc1066 };
  39
  40 /* adm1021 constants specified below */
  41
  42 /* The adm1021 registers */
  43 /* Read-only */
  44 /* For nr in 0-1 */
  45 #define ADM1021_REG_TEMP(nr)            (nr)
  46 #define ADM1021_REG_STATUS              0x02
  47 /* 0x41 = AD, 0x49 = TI, 0x4D = Maxim, 0x23 = Genesys , 0x54 = Onsemi */
  48 #define ADM1021_REG_MAN_ID              0xFE
  49 /* ADM1021 = 0x0X, ADM1023 = 0x3X */
  50 #define ADM1021_REG_DEV_ID              0xFF
  51 /* These use different addresses for reading/writing */
  52 #define ADM1021_REG_CONFIG_R            0x03
  53 #define ADM1021_REG_CONFIG_W            0x09
  54 #define ADM1021_REG_CONV_RATE_R         0x04
  55 #define ADM1021_REG_CONV_RATE_W         0x0A
  56 /* These are for the ADM1023's additional precision on the remote temp sensor */
  57 #define ADM1023_REG_REM_TEMP_PREC       0x10
  58 #define ADM1023_REG_REM_OFFSET          0x11
  59 #define ADM1023_REG_REM_OFFSET_PREC     0x12
  60 #define ADM1023_REG_REM_TOS_PREC        0x13
  61 #define ADM1023_REG_REM_THYST_PREC      0x14
  62 /* limits */
  63 /* For nr in 0-1 */
  64 #define ADM1021_REG_TOS_R(nr)           (0x05 + 2 * (nr))
  65 #define ADM1021_REG_TOS_W(nr)           (0x0B + 2 * (nr))
  66 #define ADM1021_REG_THYST_R(nr)         (0x06 + 2 * (nr))
  67 #define ADM1021_REG_THYST_W(nr)         (0x0C + 2 * (nr))
  68 /* write-only */
  69 #define ADM1021_REG_ONESHOT             0x0F
  70
  71 /* Initial values */
  72
  73 /*
  74  * Note: Even though I left the low and high limits named os and hyst,
  75  * they don't quite work like a thermostat the way the LM75 does.  I.e.,
  76  * a lower temp than THYST actually triggers an alarm instead of
  77  * clearing it.  Weird, ey?   --Phil
  78  */
  79
  80 /* Each client has this additional data */
  81 struct adm1021_data {
  82         struct i2c_client *client;
  83         enum chips type;
  84
  85         const struct attribute_group *groups[3];
  86
  87         struct mutex update_lock;
  88         char valid;             /* !=0 if following fields are valid */
  89         char low_power;         /* !=0 if device in low power mode */
  90         unsigned long last_updated;     /* In jiffies */
  91
  92         int temp_max[2];                /* Register values */
  93         int temp_min[2];
  94         int temp[2];
  95         u8 alarms;
  96         /* Special values for ADM1023 only */
  97         u8 remote_temp_offset;
  98         u8 remote_temp_offset_prec;
  99 };
 100
 101 /* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */
 102 static bool read_only;
 103
 104 static struct adm1021_data *adm1021_update_device(struct device *dev)
 105 {
 106         struct adm1021_data *data = dev_get_drvdata(dev);
 107         struct i2c_client *client = data->client;
 108
 109         mutex_lock(&data->update_lock);
 110
 111         if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
 112             || !data->valid) {
 113                 int i;
 114
 115                 dev_dbg(dev, "Starting adm1021 update\n");
 116
 117                 for (i = 0; i < 2; i++) {
 118                         data->temp[i] = 1000 *
 119                                 (s8) i2c_smbus_read_byte_data(
 120                                         client, ADM1021_REG_TEMP(i));
 121                         data->temp_max[i] = 1000 *
 122                                 (s8) i2c_smbus_read_byte_data(
 123                                         client, ADM1021_REG_TOS_R(i));
 124                         if (data->type != lm84) {
 125                                 data->temp_min[i] = 1000 *
 126                                   (s8) i2c_smbus_read_byte_data(client,
 127                                                         ADM1021_REG_THYST_R(i));
 128                         }
 129                 }
 130                 data->alarms = i2c_smbus_read_byte_data(client,
 131                                                 ADM1021_REG_STATUS) & 0x7c;
 132                 if (data->type == adm1023) {
 133                         /*
 134                          * The ADM1023 provides 3 extra bits of precision for
 135                          * the remote sensor in extra registers.
 136                          */
 137                         data->temp[1] += 125 * (i2c_smbus_read_byte_data(
 138                                 client, ADM1023_REG_REM_TEMP_PREC) >> 5);
 139                         data->temp_max[1] += 125 * (i2c_smbus_read_byte_data(
 140                                 client, ADM1023_REG_REM_TOS_PREC) >> 5);
 141                         data->temp_min[1] += 125 * (i2c_smbus_read_byte_data(
 142                                 client, ADM1023_REG_REM_THYST_PREC) >> 5);
 143                         data->remote_temp_offset =
 144                                 i2c_smbus_read_byte_data(client,
 145                                                 ADM1023_REG_REM_OFFSET);
 146                         data->remote_temp_offset_prec =
 147                                 i2c_smbus_read_byte_data(client,
 148                                                 ADM1023_REG_REM_OFFSET_PREC);
 149                 }
 150                 data->last_updated = jiffies;
 151                 data->valid = 1;
 152         }
 153
 154         mutex_unlock(&data->update_lock);
 155
 156         return data;
 157 }
 158
 159 static ssize_t show_temp(struct device *dev,
 160                          struct device_attribute *devattr, char *buf)
 161 {
 162         int index = to_sensor_dev_attr(devattr)->index;
 163         struct adm1021_data *data = adm1021_update_device(dev);
 164
 165         return sprintf(buf, "%d\n", data->temp[index]);
 166 }
 167
 168 static ssize_t show_temp_max(struct device *dev,
 169                              struct device_attribute *devattr, char *buf)
 170 {
 171         int index = to_sensor_dev_attr(devattr)->index;
 172         struct adm1021_data *data = adm1021_update_device(dev);
 173
 174         return sprintf(buf, "%d\n", data->temp_max[index]);
 175 }
 176
 177 static ssize_t show_temp_min(struct device *dev,
 178                              struct device_attribute *devattr, char *buf)
 179 {
 180         int index = to_sensor_dev_attr(devattr)->index;
 181         struct adm1021_data *data = adm1021_update_device(dev);
 182
 183         return sprintf(buf, "%d\n", data->temp_min[index]);
 184 }
 185
 186 static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
 187                           char *buf)
 188 {
 189         int index = to_sensor_dev_attr(attr)->index;
 190         struct adm1021_data *data = adm1021_update_device(dev);
 191         return sprintf(buf, "%u\n", (data->alarms >> index) & 1);
 192 }
 193
 194 static ssize_t alarms_show(struct device *dev,
 195                            struct device_attribute *attr,
 196                            char *buf)
 197 {
 198         struct adm1021_data *data = adm1021_update_device(dev);
 199         return sprintf(buf, "%u\n", data->alarms);
 200 }
 201
 202 static ssize_t set_temp_max(struct device *dev,
 203                             struct device_attribute *devattr,
 204                             const char *buf, size_t count)
 205 {
 206         int index = to_sensor_dev_attr(devattr)->index;
 207         struct adm1021_data *data = dev_get_drvdata(dev);
 208         struct i2c_client *client = data->client;
 209         long temp;
 210         int reg_val, err;
 211
 212         err = kstrtol(buf, 10, &temp);
 213         if (err)
 214                 return err;
 215         temp /= 1000;
 216
 217         mutex_lock(&data->update_lock);
 218         reg_val = clamp_val(temp, -128, 127);
 219         data->temp_max[index] = reg_val * 1000;
 220         if (!read_only)
 221                 i2c_smbus_write_byte_data(client, ADM1021_REG_TOS_W(index),
 222                                           reg_val);
 223         mutex_unlock(&data->update_lock);
 224
 225         return count;
 226 }
 227
 228 static ssize_t set_temp_min(struct device *dev,
 229                             struct device_attribute *devattr,
 230                             const char *buf, size_t count)
 231 {
 232         int index = to_sensor_dev_attr(devattr)->index;
 233         struct adm1021_data *data = dev_get_drvdata(dev);
 234         struct i2c_client *client = data->client;
 235         long temp;
 236         int reg_val, err;
 237
 238         err = kstrtol(buf, 10, &temp);
 239         if (err)
 240                 return err;
 241         temp /= 1000;
 242
 243         mutex_lock(&data->update_lock);
 244         reg_val = clamp_val(temp, -128, 127);
 245         data->temp_min[index] = reg_val * 1000;
 246         if (!read_only)
 247                 i2c_smbus_write_byte_data(client, ADM1021_REG_THYST_W(index),
 248                                           reg_val);
 249         mutex_unlock(&data->update_lock);
 250
 251         return count;
 252 }
 253
 254 static ssize_t low_power_show(struct device *dev,
 255                               struct device_attribute *devattr, char *buf)
 256 {
 257         struct adm1021_data *data = adm1021_update_device(dev);
 258         return sprintf(buf, "%d\n", data->low_power);
 259 }
 260
 261 static ssize_t low_power_store(struct device *dev,
 262                                struct device_attribute *devattr,
 263                                const char *buf, size_t count)
 264 {
 265         struct adm1021_data *data = dev_get_drvdata(dev);
 266         struct i2c_client *client = data->client;
 267         char low_power;
 268         unsigned long val;
 269         int err;
 270
 271         err = kstrtoul(buf, 10, &val);
 272         if (err)
 273                 return err;
 274         low_power = val != 0;
 275
 276         mutex_lock(&data->update_lock);
 277         if (low_power != data->low_power) {
 278                 int config = i2c_smbus_read_byte_data(
 279                         client, ADM1021_REG_CONFIG_R);
 280                 data->low_power = low_power;
 281                 i2c_smbus_write_byte_data(client, ADM1021_REG_CONFIG_W,
 282                         (config & 0xBF) | (low_power << 6));
 283         }
 284         mutex_unlock(&data->update_lock);
 285
 286         return count;
 287 }
 288
 289
 290 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
 291 static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max,
 292                           set_temp_max, 0);
 293 static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_min,
 294                           set_temp_min, 0);
 295 static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
 296 static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_max,
 297                           set_temp_max, 1);
 298 static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_min,
 299                           set_temp_min, 1);
 300 static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 6);
 301 static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, 5);
 302 static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 4);
 303 static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_alarm, NULL, 3);
 304 static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 2);
 305
 306 static DEVICE_ATTR_RO(alarms);
 307 static DEVICE_ATTR_RW(low_power);
 308
 309 static struct attribute *adm1021_attributes[] = {
 310         &sensor_dev_attr_temp1_max.dev_attr.attr,
 311         &sensor_dev_attr_temp1_input.dev_attr.attr,
 312         &sensor_dev_attr_temp2_max.dev_attr.attr,
 313         &sensor_dev_attr_temp2_input.dev_attr.attr,
 314         &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
 315         &sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
 316         &sensor_dev_attr_temp2_fault.dev_attr.attr,
 317         &dev_attr_alarms.attr,
 318         &dev_attr_low_power.attr,
 319         NULL
 320 };
 321
 322 static const struct attribute_group adm1021_group = {
 323         .attrs = adm1021_attributes,
 324 };
 325
 326 static struct attribute *adm1021_min_attributes[] = {
 327         &sensor_dev_attr_temp1_min.dev_attr.attr,
 328         &sensor_dev_attr_temp2_min.dev_attr.attr,
 329         &sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
 330         &sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
 331         NULL
 332 };
 333
 334 static const struct attribute_group adm1021_min_group = {
 335         .attrs = adm1021_min_attributes,
 336 };
 337
 338 /* Return 0 if detection is successful, -ENODEV otherwise */
 339 static int adm1021_detect(struct i2c_client *client,
 340                           struct i2c_board_info *info)
 341 {
 342         struct i2c_adapter *adapter = client->adapter;
 343         const char *type_name;
 344         int conv_rate, status, config, man_id, dev_id;
 345
 346         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 347                 pr_debug("detect failed, smbus byte data not supported!\n");
 348                 return -ENODEV;
 349         }
 350
 351         status = i2c_smbus_read_byte_data(client, ADM1021_REG_STATUS);
 352         conv_rate = i2c_smbus_read_byte_data(client,
 353                                              ADM1021_REG_CONV_RATE_R);
 354         config = i2c_smbus_read_byte_data(client, ADM1021_REG_CONFIG_R);
 355
 356         /* Check unused bits */
 357         if ((status & 0x03) || (config & 0x3F) || (conv_rate & 0xF8)) {
 358                 pr_debug("detect failed, chip not detected!\n");
 359                 return -ENODEV;
 360         }
 361
 362         /* Determine the chip type. */
 363         man_id = i2c_smbus_read_byte_data(client, ADM1021_REG_MAN_ID);
 364         dev_id = i2c_smbus_read_byte_data(client, ADM1021_REG_DEV_ID);
 365
 366         if (man_id < 0 || dev_id < 0)
 367                 return -ENODEV;
 368
 369         if (man_id == 0x4d && dev_id == 0x01)
 370                 type_name = "max1617a";
 371         else if (man_id == 0x41) {
 372                 if ((dev_id & 0xF0) == 0x30)
 373                         type_name = "adm1023";
 374                 else if ((dev_id & 0xF0) == 0x00)
 375                         type_name = "adm1021";
 376                 else
 377                         return -ENODEV;
 378         } else if (man_id == 0x49)
 379                 type_name = "thmc10";
 380         else if (man_id == 0x23)
 381                 type_name = "gl523sm";
 382         else if (man_id == 0x54)
 383                 type_name = "mc1066";
 384         else {
 385                 int lte, rte, lhi, rhi, llo, rlo;
 386
 387                 /* extra checks for LM84 and MAX1617 to avoid misdetections */
 388
 389                 llo = i2c_smbus_read_byte_data(client, ADM1021_REG_THYST_R(0));
 390                 rlo = i2c_smbus_read_byte_data(client, ADM1021_REG_THYST_R(1));
 391
 392                 /* fail if any of the additional register reads failed */
 393                 if (llo < 0 || rlo < 0)
 394                         return -ENODEV;
 395
 396                 lte = i2c_smbus_read_byte_data(client, ADM1021_REG_TEMP(0));
 397                 rte = i2c_smbus_read_byte_data(client, ADM1021_REG_TEMP(1));
 398                 lhi = i2c_smbus_read_byte_data(client, ADM1021_REG_TOS_R(0));
 399                 rhi = i2c_smbus_read_byte_data(client, ADM1021_REG_TOS_R(1));
 400
 401                 /*
 402                  * Fail for negative temperatures and negative high limits.
 403                  * This check also catches read errors on the tested registers.
 404                  */
 405                 if ((s8)lte < 0 || (s8)rte < 0 || (s8)lhi < 0 || (s8)rhi < 0)
 406                         return -ENODEV;
 407
 408                 /* fail if all registers hold the same value */
 409                 if (lte == rte && lte == lhi && lte == rhi && lte == llo
 410                     && lte == rlo)
 411                         return -ENODEV;
 412
 413                 /*
 414                  * LM84 Mfr ID is in a different place,
 415                  * and it has more unused bits.
 416                  */
 417                 if (conv_rate == 0x00
 418                     && (config & 0x7F) == 0x00
 419                     && (status & 0xAB) == 0x00) {
 420                         type_name = "lm84";
 421                 } else {
 422                         /* fail if low limits are larger than high limits */
 423                         if ((s8)llo > lhi || (s8)rlo > rhi)
 424                                 return -ENODEV;
 425                         type_name = "max1617";
 426                 }
 427         }
 428
 429         pr_debug("Detected chip %s at adapter %d, address 0x%02x.\n",
 430                  type_name, i2c_adapter_id(adapter), client->addr);
 431         strlcpy(info->type, type_name, I2C_NAME_SIZE);
 432
 433         return 0;
 434 }
 435
 436 static void adm1021_init_client(struct i2c_client *client)
 437 {
 438         /* Enable ADC and disable suspend mode */
 439         i2c_smbus_write_byte_data(client, ADM1021_REG_CONFIG_W,
 440                 i2c_smbus_read_byte_data(client, ADM1021_REG_CONFIG_R) & 0xBF);
 441         /* Set Conversion rate to 1/sec (this can be tinkered with) */
 442         i2c_smbus_write_byte_data(client, ADM1021_REG_CONV_RATE_W, 0x04);
 443 }
 444
 445 static int adm1021_probe(struct i2c_client *client,
 446                          const struct i2c_device_id *id)
 447 {
 448         struct device *dev = &client->dev;
 449         struct adm1021_data *data;
 450         struct device *hwmon_dev;
 451
 452         data = devm_kzalloc(dev, sizeof(struct adm1021_data), GFP_KERNEL);
 453         if (!data)
 454                 return -ENOMEM;
 455
 456         data->client = client;
 457         data->type = id->driver_data;
 458         mutex_init(&data->update_lock);
 459
 460         /* Initialize the ADM1021 chip */
 461         if (data->type != lm84 && !read_only)
 462                 adm1021_init_client(client);
 463
 464         data->groups[0] = &adm1021_group;
 465         if (data->type != lm84)
 466                 data->groups[1] = &adm1021_min_group;
 467
 468         hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
 469                                                            data, data->groups);
 470
 471         return PTR_ERR_OR_ZERO(hwmon_dev);
 472 }
 473
 474 static const struct i2c_device_id adm1021_id[] = {
 475         { "adm1021", adm1021 },
 476         { "adm1023", adm1023 },
 477         { "max1617", max1617 },
 478         { "max1617a", max1617a },
 479         { "thmc10", thmc10 },
 480         { "lm84", lm84 },
 481         { "gl523sm", gl523sm },
 482         { "mc1066", mc1066 },
 483         { }
 484 };
 485 MODULE_DEVICE_TABLE(i2c, adm1021_id);
 486
 487 static struct i2c_driver adm1021_driver = {
 488         .class          = I2C_CLASS_HWMON,
 489         .driver = {
 490                 .name   = "adm1021",
 491         },
 492         .probe          = adm1021_probe,
 493         .id_table       = adm1021_id,
 494         .detect         = adm1021_detect,
 495         .address_list   = normal_i2c,
 496 };
 497
 498 module_i2c_driver(adm1021_driver);
 499
 500 MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and "
 501                 "Philip Edelbrock <phil@netroedge.com>");
 502 MODULE_DESCRIPTION("adm1021 driver");
 503 MODULE_LICENSE("GPL");
 504
 505 module_param(read_only, bool, 0);
 506 MODULE_PARM_DESC(read_only, "Don't set any values, read only mode");