Linux 4.19.133
[linux/fpc-iii.git] / drivers / hwmon / max6621.c
blob35555f0eefb96239d9d94cb5641c5f2abcef3255
1 /*
2 * Hardware monitoring driver for Maxim MAX6621
4 * Copyright (c) 2017 Mellanox Technologies. All rights reserved.
5 * Copyright (c) 2017 Vadim Pasternak <vadimp@mellanox.com>
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
18 #include <linux/bitops.h>
19 #include <linux/hwmon.h>
20 #include <linux/hwmon-sysfs.h>
21 #include <linux/i2c.h>
22 #include <linux/init.h>
23 #include <linux/module.h>
24 #include <linux/of_device.h>
25 #include <linux/regmap.h>
27 #define MAX6621_DRV_NAME "max6621"
28 #define MAX6621_TEMP_INPUT_REG_NUM 9
29 #define MAX6621_TEMP_INPUT_MIN -127000
30 #define MAX6621_TEMP_INPUT_MAX 128000
31 #define MAX6621_TEMP_ALERT_CHAN_SHIFT 1
33 #define MAX6621_TEMP_S0D0_REG 0x00
34 #define MAX6621_TEMP_S0D1_REG 0x01
35 #define MAX6621_TEMP_S1D0_REG 0x02
36 #define MAX6621_TEMP_S1D1_REG 0x03
37 #define MAX6621_TEMP_S2D0_REG 0x04
38 #define MAX6621_TEMP_S2D1_REG 0x05
39 #define MAX6621_TEMP_S3D0_REG 0x06
40 #define MAX6621_TEMP_S3D1_REG 0x07
41 #define MAX6621_TEMP_MAX_REG 0x08
42 #define MAX6621_TEMP_MAX_ADDR_REG 0x0a
43 #define MAX6621_TEMP_ALERT_CAUSE_REG 0x0b
44 #define MAX6621_CONFIG0_REG 0x0c
45 #define MAX6621_CONFIG1_REG 0x0d
46 #define MAX6621_CONFIG2_REG 0x0e
47 #define MAX6621_CONFIG3_REG 0x0f
48 #define MAX6621_TEMP_S0_ALERT_REG 0x10
49 #define MAX6621_TEMP_S1_ALERT_REG 0x11
50 #define MAX6621_TEMP_S2_ALERT_REG 0x12
51 #define MAX6621_TEMP_S3_ALERT_REG 0x13
52 #define MAX6621_CLEAR_ALERT_REG 0x15
53 #define MAX6621_REG_MAX (MAX6621_CLEAR_ALERT_REG + 1)
54 #define MAX6621_REG_TEMP_SHIFT 0x06
56 #define MAX6621_ENABLE_TEMP_ALERTS_BIT 4
57 #define MAX6621_ENABLE_I2C_CRC_BIT 5
58 #define MAX6621_ENABLE_ALTERNATE_DATA 6
59 #define MAX6621_ENABLE_LOCKUP_TO 7
60 #define MAX6621_ENABLE_S0D0_BIT 8
61 #define MAX6621_ENABLE_S3D1_BIT 15
62 #define MAX6621_ENABLE_TEMP_ALL GENMASK(MAX6621_ENABLE_S3D1_BIT, \
63 MAX6621_ENABLE_S0D0_BIT)
64 #define MAX6621_POLL_DELAY_MASK 0x5
65 #define MAX6621_CONFIG0_INIT (MAX6621_ENABLE_TEMP_ALL | \
66 BIT(MAX6621_ENABLE_LOCKUP_TO) | \
67 BIT(MAX6621_ENABLE_I2C_CRC_BIT) | \
68 MAX6621_POLL_DELAY_MASK)
69 #define MAX6621_PECI_BIT_TIME 0x2
70 #define MAX6621_PECI_RETRY_NUM 0x3
71 #define MAX6621_CONFIG1_INIT ((MAX6621_PECI_BIT_TIME << 8) | \
72 MAX6621_PECI_RETRY_NUM)
74 /* Error codes */
75 #define MAX6621_TRAN_FAILED 0x8100 /*
76 * PECI transaction failed for more
77 * than the configured number of
78 * consecutive retries.
80 #define MAX6621_POOL_DIS 0x8101 /*
81 * Polling disabled for requested
82 * socket/domain.
84 #define MAX6621_POOL_UNCOMPLETE 0x8102 /*
85 * First poll not yet completed for
86 * requested socket/domain (on
87 * startup).
89 #define MAX6621_SD_DIS 0x8103 /*
90 * Read maximum temperature requested,
91 * but no sockets/domains enabled or
92 * all enabled sockets/domains have
93 * errors; or read maximum temperature
94 * address requested, but read maximum
95 * temperature was not called.
97 #define MAX6621_ALERT_DIS 0x8104 /*
98 * Get alert socket/domain requested,
99 * but no alert active.
101 #define MAX6621_PECI_ERR_MIN 0x8000 /* Intel spec PECI error min value. */
102 #define MAX6621_PECI_ERR_MAX 0x80ff /* Intel spec PECI error max value. */
104 static const u32 max6621_temp_regs[] = {
105 MAX6621_TEMP_MAX_REG, MAX6621_TEMP_S0D0_REG, MAX6621_TEMP_S1D0_REG,
106 MAX6621_TEMP_S2D0_REG, MAX6621_TEMP_S3D0_REG, MAX6621_TEMP_S0D1_REG,
107 MAX6621_TEMP_S1D1_REG, MAX6621_TEMP_S2D1_REG, MAX6621_TEMP_S3D1_REG,
110 static const char *const max6621_temp_labels[] = {
111 "maximum",
112 "socket0_0",
113 "socket1_0",
114 "socket2_0",
115 "socket3_0",
116 "socket0_1",
117 "socket1_1",
118 "socket2_1",
119 "socket3_1",
122 static const int max6621_temp_alert_chan2reg[] = {
123 MAX6621_TEMP_S0_ALERT_REG,
124 MAX6621_TEMP_S1_ALERT_REG,
125 MAX6621_TEMP_S2_ALERT_REG,
126 MAX6621_TEMP_S3_ALERT_REG,
130 * struct max6621_data - private data:
132 * @client: I2C client;
133 * @regmap: register map handle;
134 * @input_chan2reg: mapping from channel to register;
136 struct max6621_data {
137 struct i2c_client *client;
138 struct regmap *regmap;
139 int input_chan2reg[MAX6621_TEMP_INPUT_REG_NUM + 1];
142 static long max6621_temp_mc2reg(long val)
144 return (val / 1000L) << MAX6621_REG_TEMP_SHIFT;
147 static umode_t
148 max6621_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr,
149 int channel)
151 /* Skip channels which are not physically conncted. */
152 if (((struct max6621_data *)data)->input_chan2reg[channel] < 0)
153 return 0;
155 switch (type) {
156 case hwmon_temp:
157 switch (attr) {
158 case hwmon_temp_input:
159 case hwmon_temp_label:
160 case hwmon_temp_crit_alarm:
161 return 0444;
162 case hwmon_temp_offset:
163 case hwmon_temp_crit:
164 return 0644;
165 default:
166 break;
169 default:
170 break;
173 return 0;
176 static int max6621_verify_reg_data(struct device *dev, int regval)
178 if (regval >= MAX6621_PECI_ERR_MIN &&
179 regval <= MAX6621_PECI_ERR_MAX) {
180 dev_dbg(dev, "PECI error code - err 0x%04x.\n",
181 regval);
183 return -EIO;
186 switch (regval) {
187 case MAX6621_TRAN_FAILED:
188 dev_dbg(dev, "PECI transaction failed - err 0x%04x.\n",
189 regval);
190 return -EIO;
191 case MAX6621_POOL_DIS:
192 dev_dbg(dev, "Polling disabled - err 0x%04x.\n", regval);
193 return -EOPNOTSUPP;
194 case MAX6621_POOL_UNCOMPLETE:
195 dev_dbg(dev, "First poll not completed on startup - err 0x%04x.\n",
196 regval);
197 return -EIO;
198 case MAX6621_SD_DIS:
199 dev_dbg(dev, "Resource is disabled - err 0x%04x.\n", regval);
200 return -EOPNOTSUPP;
201 case MAX6621_ALERT_DIS:
202 dev_dbg(dev, "No alert active - err 0x%04x.\n", regval);
203 return -EOPNOTSUPP;
204 default:
205 return 0;
209 static int
210 max6621_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
211 int channel, long *val)
213 struct max6621_data *data = dev_get_drvdata(dev);
214 u32 regval;
215 int reg;
216 s8 temp;
217 int ret;
219 switch (type) {
220 case hwmon_temp:
221 switch (attr) {
222 case hwmon_temp_input:
223 reg = data->input_chan2reg[channel];
224 ret = regmap_read(data->regmap, reg, &regval);
225 if (ret)
226 return ret;
228 ret = max6621_verify_reg_data(dev, regval);
229 if (ret)
230 return ret;
233 * Bit MAX6621_REG_TEMP_SHIFT represents 1 degree step.
234 * The temperature is given in two's complement and 8
235 * bits is used for the register conversion.
237 temp = (regval >> MAX6621_REG_TEMP_SHIFT);
238 *val = temp * 1000L;
240 break;
241 case hwmon_temp_offset:
242 ret = regmap_read(data->regmap, MAX6621_CONFIG2_REG,
243 &regval);
244 if (ret)
245 return ret;
247 ret = max6621_verify_reg_data(dev, regval);
248 if (ret)
249 return ret;
251 *val = (regval >> MAX6621_REG_TEMP_SHIFT) *
252 1000L;
254 break;
255 case hwmon_temp_crit:
256 channel -= MAX6621_TEMP_ALERT_CHAN_SHIFT;
257 reg = max6621_temp_alert_chan2reg[channel];
258 ret = regmap_read(data->regmap, reg, &regval);
259 if (ret)
260 return ret;
262 ret = max6621_verify_reg_data(dev, regval);
263 if (ret)
264 return ret;
266 *val = regval * 1000L;
268 break;
269 case hwmon_temp_crit_alarm:
271 * Set val to zero to recover the case, when reading
272 * MAX6621_TEMP_ALERT_CAUSE_REG results in for example
273 * MAX6621_ALERT_DIS. Reading will return with error,
274 * but in such case alarm should be returned as 0.
276 *val = 0;
277 ret = regmap_read(data->regmap,
278 MAX6621_TEMP_ALERT_CAUSE_REG,
279 &regval);
280 if (ret)
281 return ret;
283 ret = max6621_verify_reg_data(dev, regval);
284 if (ret) {
285 /* Do not report error if alert is disabled. */
286 if (regval == MAX6621_ALERT_DIS)
287 return 0;
288 else
289 return ret;
293 * Clear the alert automatically, using send-byte
294 * smbus protocol for clearing alert.
296 if (regval) {
297 ret = i2c_smbus_write_byte(data->client,
298 MAX6621_CLEAR_ALERT_REG);
299 if (ret)
300 return ret;
303 *val = !!regval;
305 break;
306 default:
307 return -EOPNOTSUPP;
309 break;
311 default:
312 return -EOPNOTSUPP;
315 return 0;
318 static int
319 max6621_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
320 int channel, long val)
322 struct max6621_data *data = dev_get_drvdata(dev);
323 u32 reg;
325 switch (type) {
326 case hwmon_temp:
327 switch (attr) {
328 case hwmon_temp_offset:
329 /* Clamp to allowed range to prevent overflow. */
330 val = clamp_val(val, MAX6621_TEMP_INPUT_MIN,
331 MAX6621_TEMP_INPUT_MAX);
332 val = max6621_temp_mc2reg(val);
334 return regmap_write(data->regmap,
335 MAX6621_CONFIG2_REG, val);
336 case hwmon_temp_crit:
337 channel -= MAX6621_TEMP_ALERT_CHAN_SHIFT;
338 reg = max6621_temp_alert_chan2reg[channel];
339 /* Clamp to allowed range to prevent overflow. */
340 val = clamp_val(val, MAX6621_TEMP_INPUT_MIN,
341 MAX6621_TEMP_INPUT_MAX);
342 val = val / 1000L;
344 return regmap_write(data->regmap, reg, val);
345 default:
346 return -EOPNOTSUPP;
348 break;
350 default:
351 return -EOPNOTSUPP;
354 return -EOPNOTSUPP;
357 static int
358 max6621_read_string(struct device *dev, enum hwmon_sensor_types type, u32 attr,
359 int channel, const char **str)
361 switch (type) {
362 case hwmon_temp:
363 switch (attr) {
364 case hwmon_temp_label:
365 *str = max6621_temp_labels[channel];
366 return 0;
367 default:
368 return -EOPNOTSUPP;
370 break;
371 default:
372 return -EOPNOTSUPP;
375 return -EOPNOTSUPP;
378 static bool max6621_writeable_reg(struct device *dev, unsigned int reg)
380 switch (reg) {
381 case MAX6621_CONFIG0_REG:
382 case MAX6621_CONFIG1_REG:
383 case MAX6621_CONFIG2_REG:
384 case MAX6621_CONFIG3_REG:
385 case MAX6621_TEMP_S0_ALERT_REG:
386 case MAX6621_TEMP_S1_ALERT_REG:
387 case MAX6621_TEMP_S2_ALERT_REG:
388 case MAX6621_TEMP_S3_ALERT_REG:
389 case MAX6621_TEMP_ALERT_CAUSE_REG:
390 return true;
392 return false;
395 static bool max6621_readable_reg(struct device *dev, unsigned int reg)
397 switch (reg) {
398 case MAX6621_TEMP_S0D0_REG:
399 case MAX6621_TEMP_S0D1_REG:
400 case MAX6621_TEMP_S1D0_REG:
401 case MAX6621_TEMP_S1D1_REG:
402 case MAX6621_TEMP_S2D0_REG:
403 case MAX6621_TEMP_S2D1_REG:
404 case MAX6621_TEMP_S3D0_REG:
405 case MAX6621_TEMP_S3D1_REG:
406 case MAX6621_TEMP_MAX_REG:
407 case MAX6621_TEMP_MAX_ADDR_REG:
408 case MAX6621_CONFIG0_REG:
409 case MAX6621_CONFIG1_REG:
410 case MAX6621_CONFIG2_REG:
411 case MAX6621_CONFIG3_REG:
412 case MAX6621_TEMP_S0_ALERT_REG:
413 case MAX6621_TEMP_S1_ALERT_REG:
414 case MAX6621_TEMP_S2_ALERT_REG:
415 case MAX6621_TEMP_S3_ALERT_REG:
416 return true;
418 return false;
421 static bool max6621_volatile_reg(struct device *dev, unsigned int reg)
423 switch (reg) {
424 case MAX6621_TEMP_S0D0_REG:
425 case MAX6621_TEMP_S0D1_REG:
426 case MAX6621_TEMP_S1D0_REG:
427 case MAX6621_TEMP_S1D1_REG:
428 case MAX6621_TEMP_S2D0_REG:
429 case MAX6621_TEMP_S2D1_REG:
430 case MAX6621_TEMP_S3D0_REG:
431 case MAX6621_TEMP_S3D1_REG:
432 case MAX6621_TEMP_MAX_REG:
433 case MAX6621_TEMP_S0_ALERT_REG:
434 case MAX6621_TEMP_S1_ALERT_REG:
435 case MAX6621_TEMP_S2_ALERT_REG:
436 case MAX6621_TEMP_S3_ALERT_REG:
437 case MAX6621_TEMP_ALERT_CAUSE_REG:
438 return true;
440 return false;
443 static const struct reg_default max6621_regmap_default[] = {
444 { MAX6621_CONFIG0_REG, MAX6621_CONFIG0_INIT },
445 { MAX6621_CONFIG1_REG, MAX6621_CONFIG1_INIT },
448 static const struct regmap_config max6621_regmap_config = {
449 .reg_bits = 8,
450 .val_bits = 16,
451 .max_register = MAX6621_REG_MAX,
452 .val_format_endian = REGMAP_ENDIAN_LITTLE,
453 .cache_type = REGCACHE_FLAT,
454 .writeable_reg = max6621_writeable_reg,
455 .readable_reg = max6621_readable_reg,
456 .volatile_reg = max6621_volatile_reg,
457 .reg_defaults = max6621_regmap_default,
458 .num_reg_defaults = ARRAY_SIZE(max6621_regmap_default),
461 static u32 max6621_chip_config[] = {
462 HWMON_C_REGISTER_TZ,
466 static const struct hwmon_channel_info max6621_chip = {
467 .type = hwmon_chip,
468 .config = max6621_chip_config,
471 static const u32 max6621_temp_config[] = {
472 HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_OFFSET,
473 HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL,
474 HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL,
475 HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL,
476 HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL,
477 HWMON_T_INPUT | HWMON_T_LABEL,
478 HWMON_T_INPUT | HWMON_T_LABEL,
479 HWMON_T_INPUT | HWMON_T_LABEL,
480 HWMON_T_INPUT | HWMON_T_LABEL,
484 static const struct hwmon_channel_info max6621_temp = {
485 .type = hwmon_temp,
486 .config = max6621_temp_config,
489 static const struct hwmon_channel_info *max6621_info[] = {
490 &max6621_chip,
491 &max6621_temp,
492 NULL
495 static const struct hwmon_ops max6621_hwmon_ops = {
496 .read = max6621_read,
497 .write = max6621_write,
498 .read_string = max6621_read_string,
499 .is_visible = max6621_is_visible,
502 static const struct hwmon_chip_info max6621_chip_info = {
503 .ops = &max6621_hwmon_ops,
504 .info = max6621_info,
507 static int max6621_probe(struct i2c_client *client,
508 const struct i2c_device_id *id)
510 struct device *dev = &client->dev;
511 struct max6621_data *data;
512 struct device *hwmon_dev;
513 int i;
514 int ret;
516 data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
517 if (!data)
518 return -ENOMEM;
520 data->regmap = devm_regmap_init_i2c(client, &max6621_regmap_config);
521 if (IS_ERR(data->regmap))
522 return PTR_ERR(data->regmap);
524 i2c_set_clientdata(client, data);
525 data->client = client;
527 /* Set CONFIG0 register masking temperature alerts and PEC. */
528 ret = regmap_write(data->regmap, MAX6621_CONFIG0_REG,
529 MAX6621_CONFIG0_INIT);
530 if (ret)
531 return ret;
533 /* Set CONFIG1 register for PEC access retry number. */
534 ret = regmap_write(data->regmap, MAX6621_CONFIG1_REG,
535 MAX6621_CONFIG1_INIT);
536 if (ret)
537 return ret;
539 /* Sync registers with hardware. */
540 regcache_mark_dirty(data->regmap);
541 ret = regcache_sync(data->regmap);
542 if (ret)
543 return ret;
545 /* Verify which temperature input registers are enabled. */
546 for (i = 0; i < MAX6621_TEMP_INPUT_REG_NUM; i++) {
547 ret = i2c_smbus_read_word_data(client, max6621_temp_regs[i]);
548 if (ret < 0)
549 return ret;
550 ret = max6621_verify_reg_data(dev, ret);
551 if (ret) {
552 data->input_chan2reg[i] = -1;
553 continue;
556 data->input_chan2reg[i] = max6621_temp_regs[i];
559 hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
560 data,
561 &max6621_chip_info,
562 NULL);
564 return PTR_ERR_OR_ZERO(hwmon_dev);
567 static const struct i2c_device_id max6621_id[] = {
568 { MAX6621_DRV_NAME, 0 },
571 MODULE_DEVICE_TABLE(i2c, max6621_id);
573 static const struct of_device_id max6621_of_match[] = {
574 { .compatible = "maxim,max6621" },
577 MODULE_DEVICE_TABLE(of, max6621_of_match);
579 static struct i2c_driver max6621_driver = {
580 .class = I2C_CLASS_HWMON,
581 .driver = {
582 .name = MAX6621_DRV_NAME,
583 .of_match_table = of_match_ptr(max6621_of_match),
585 .probe = max6621_probe,
586 .id_table = max6621_id,
589 module_i2c_driver(max6621_driver);
591 MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>");
592 MODULE_DESCRIPTION("Driver for Maxim MAX6621");
593 MODULE_LICENSE("GPL");