drivers/media/common/saa7146/saa7146_core.c

   1 /*
   2     saa7146.o - driver for generic saa7146-based hardware
   3
   4     Copyright (C) 1998-2003 Michael Hunold <michael@mihu.de>
   5
   6     This program is free software; you can redistribute it and/or modify
   7     it under the terms of the GNU General Public License as published by
   8     the Free Software Foundation; either version 2 of the License, or
   9     (at your option) any later version.
  10
  11     This program is distributed in the hope that it will be useful,
  12     but WITHOUT ANY WARRANTY; without even the implied warranty of
  13     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14     GNU General Public License for more details.
  15
  16     You should have received a copy of the GNU General Public License
  17     along with this program; if not, write to the Free Software
  18     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  19 */
  20
  21 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  22
  23 #include <media/drv-intf/saa7146.h>
  24 #include <linux/module.h>
  25
  26 static int saa7146_num;
  27
  28 unsigned int saa7146_debug;
  29
  30 module_param(saa7146_debug, uint, 0644);
  31 MODULE_PARM_DESC(saa7146_debug, "debug level (default: 0)");
  32
  33 #if 0
  34 static void dump_registers(struct saa7146_dev* dev)
  35 {
  36         int i = 0;
  37
  38         pr_info(" @ %li jiffies:\n", jiffies);
  39         for (i = 0; i <= 0x148; i += 4)
  40                 pr_info("0x%03x: 0x%08x\n", i, saa7146_read(dev, i));
  41 }
  42 #endif
  43
  44 /****************************************************************************
  45  * gpio and debi helper functions
  46  ****************************************************************************/
  47
  48 void saa7146_setgpio(struct saa7146_dev *dev, int port, u32 data)
  49 {
  50         u32 value = 0;
  51
  52         BUG_ON(port > 3);
  53
  54         value = saa7146_read(dev, GPIO_CTRL);
  55         value &= ~(0xff << (8*port));
  56         value |= (data << (8*port));
  57         saa7146_write(dev, GPIO_CTRL, value);
  58 }
  59
  60 /* This DEBI code is based on the saa7146 Stradis driver by Nathan Laredo */
  61 static inline int saa7146_wait_for_debi_done_sleep(struct saa7146_dev *dev,
  62                                 unsigned long us1, unsigned long us2)
  63 {
  64         unsigned long timeout;
  65         int err;
  66
  67         /* wait for registers to be programmed */
  68         timeout = jiffies + usecs_to_jiffies(us1);
  69         while (1) {
  70                 err = time_after(jiffies, timeout);
  71                 if (saa7146_read(dev, MC2) & 2)
  72                         break;
  73                 if (err) {
  74                         pr_debug("%s: %s timed out while waiting for registers getting programmed\n",
  75                                dev->name, __func__);
  76                         return -ETIMEDOUT;
  77                 }
  78                 msleep(1);
  79         }
  80
  81         /* wait for transfer to complete */
  82         timeout = jiffies + usecs_to_jiffies(us2);
  83         while (1) {
  84                 err = time_after(jiffies, timeout);
  85                 if (!(saa7146_read(dev, PSR) & SPCI_DEBI_S))
  86                         break;
  87                 saa7146_read(dev, MC2);
  88                 if (err) {
  89                         DEB_S("%s: %s timed out while waiting for transfer completion\n",
  90                               dev->name, __func__);
  91                         return -ETIMEDOUT;
  92                 }
  93                 msleep(1);
  94         }
  95
  96         return 0;
  97 }
  98
  99 static inline int saa7146_wait_for_debi_done_busyloop(struct saa7146_dev *dev,
 100                                 unsigned long us1, unsigned long us2)
 101 {
 102         unsigned long loops;
 103
 104         /* wait for registers to be programmed */
 105         loops = us1;
 106         while (1) {
 107                 if (saa7146_read(dev, MC2) & 2)
 108                         break;
 109                 if (!loops--) {
 110                         pr_err("%s: %s timed out while waiting for registers getting programmed\n",
 111                                dev->name, __func__);
 112                         return -ETIMEDOUT;
 113                 }
 114                 udelay(1);
 115         }
 116
 117         /* wait for transfer to complete */
 118         loops = us2 / 5;
 119         while (1) {
 120                 if (!(saa7146_read(dev, PSR) & SPCI_DEBI_S))
 121                         break;
 122                 saa7146_read(dev, MC2);
 123                 if (!loops--) {
 124                         DEB_S("%s: %s timed out while waiting for transfer completion\n",
 125                               dev->name, __func__);
 126                         return -ETIMEDOUT;
 127                 }
 128                 udelay(5);
 129         }
 130
 131         return 0;
 132 }
 133
 134 int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop)
 135 {
 136         if (nobusyloop)
 137                 return saa7146_wait_for_debi_done_sleep(dev, 50000, 250000);
 138         else
 139                 return saa7146_wait_for_debi_done_busyloop(dev, 50000, 250000);
 140 }
 141
 142 /****************************************************************************
 143  * general helper functions
 144  ****************************************************************************/
 145
 146 /* this is videobuf_vmalloc_to_sg() from videobuf-dma-sg.c
 147    make sure virt has been allocated with vmalloc_32(), otherwise the BUG()
 148    may be triggered on highmem machines */
 149 static struct scatterlist* vmalloc_to_sg(unsigned char *virt, int nr_pages)
 150 {
 151         struct scatterlist *sglist;
 152         struct page *pg;
 153         int i;
 154
 155         sglist = kcalloc(nr_pages, sizeof(struct scatterlist), GFP_KERNEL);
 156         if (NULL == sglist)
 157                 return NULL;
 158         sg_init_table(sglist, nr_pages);
 159         for (i = 0; i < nr_pages; i++, virt += PAGE_SIZE) {
 160                 pg = vmalloc_to_page(virt);
 161                 if (NULL == pg)
 162                         goto err;
 163                 BUG_ON(PageHighMem(pg));
 164                 sg_set_page(&sglist[i], pg, PAGE_SIZE, 0);
 165         }
 166         return sglist;
 167
 168  err:
 169         kfree(sglist);
 170         return NULL;
 171 }
 172
 173 /********************************************************************************/
 174 /* common page table functions */
 175
 176 void *saa7146_vmalloc_build_pgtable(struct pci_dev *pci, long length, struct saa7146_pgtable *pt)
 177 {
 178         int pages = (length+PAGE_SIZE-1)/PAGE_SIZE;
 179         void *mem = vmalloc_32(length);
 180         int slen = 0;
 181
 182         if (NULL == mem)
 183                 goto err_null;
 184
 185         if (!(pt->slist = vmalloc_to_sg(mem, pages)))
 186                 goto err_free_mem;
 187
 188         if (saa7146_pgtable_alloc(pci, pt))
 189                 goto err_free_slist;
 190
 191         pt->nents = pages;
 192         slen = pci_map_sg(pci,pt->slist,pt->nents,PCI_DMA_FROMDEVICE);
 193         if (0 == slen)
 194                 goto err_free_pgtable;
 195
 196         if (0 != saa7146_pgtable_build_single(pci, pt, pt->slist, slen))
 197                 goto err_unmap_sg;
 198
 199         return mem;
 200
 201 err_unmap_sg:
 202         pci_unmap_sg(pci, pt->slist, pt->nents, PCI_DMA_FROMDEVICE);
 203 err_free_pgtable:
 204         saa7146_pgtable_free(pci, pt);
 205 err_free_slist:
 206         kfree(pt->slist);
 207         pt->slist = NULL;
 208 err_free_mem:
 209         vfree(mem);
 210 err_null:
 211         return NULL;
 212 }
 213
 214 void saa7146_vfree_destroy_pgtable(struct pci_dev *pci, void *mem, struct saa7146_pgtable *pt)
 215 {
 216         pci_unmap_sg(pci, pt->slist, pt->nents, PCI_DMA_FROMDEVICE);
 217         saa7146_pgtable_free(pci, pt);
 218         kfree(pt->slist);
 219         pt->slist = NULL;
 220         vfree(mem);
 221 }
 222
 223 void saa7146_pgtable_free(struct pci_dev *pci, struct saa7146_pgtable *pt)
 224 {
 225         if (NULL == pt->cpu)
 226                 return;
 227         pci_free_consistent(pci, pt->size, pt->cpu, pt->dma);
 228         pt->cpu = NULL;
 229 }
 230
 231 int saa7146_pgtable_alloc(struct pci_dev *pci, struct saa7146_pgtable *pt)
 232 {
 233         __le32       *cpu;
 234         dma_addr_t   dma_addr = 0;
 235
 236         cpu = pci_alloc_consistent(pci, PAGE_SIZE, &dma_addr);
 237         if (NULL == cpu) {
 238                 return -ENOMEM;
 239         }
 240         pt->size = PAGE_SIZE;
 241         pt->cpu  = cpu;
 242         pt->dma  = dma_addr;
 243
 244         return 0;
 245 }
 246
 247 int saa7146_pgtable_build_single(struct pci_dev *pci, struct saa7146_pgtable *pt,
 248         struct scatterlist *list, int sglen  )
 249 {
 250         __le32 *ptr, fill;
 251         int nr_pages = 0;
 252         int i,p;
 253
 254         BUG_ON(0 == sglen);
 255         BUG_ON(list->offset > PAGE_SIZE);
 256
 257         /* if we have a user buffer, the first page may not be
 258            aligned to a page boundary. */
 259         pt->offset = list->offset;
 260
 261         ptr = pt->cpu;
 262         for (i = 0; i < sglen; i++, list++) {
 263 /*
 264                 pr_debug("i:%d, adr:0x%08x, len:%d, offset:%d\n",
 265                          i, sg_dma_address(list), sg_dma_len(list),
 266                          list->offset);
 267 */
 268                 for (p = 0; p * 4096 < list->length; p++, ptr++) {
 269                         *ptr = cpu_to_le32(sg_dma_address(list) + p * 4096);
 270                         nr_pages++;
 271                 }
 272         }
 273
 274
 275         /* safety; fill the page table up with the last valid page */
 276         fill = *(ptr-1);
 277         for(i=nr_pages;i<1024;i++) {
 278                 *ptr++ = fill;
 279         }
 280
 281 /*
 282         ptr = pt->cpu;
 283         pr_debug("offset: %d\n", pt->offset);
 284         for(i=0;i<5;i++) {
 285                 pr_debug("ptr1 %d: 0x%08x\n", i, ptr[i]);
 286         }
 287 */
 288         return 0;
 289 }
 290
 291 /********************************************************************************/
 292 /* interrupt handler */
 293 static irqreturn_t interrupt_hw(int irq, void *dev_id)
 294 {
 295         struct saa7146_dev *dev = dev_id;
 296         u32 isr;
 297         u32 ack_isr;
 298
 299         /* read out the interrupt status register */
 300         ack_isr = isr = saa7146_read(dev, ISR);
 301
 302         /* is this our interrupt? */
 303         if ( 0 == isr ) {
 304                 /* nope, some other device */
 305                 return IRQ_NONE;
 306         }
 307
 308         if (dev->ext) {
 309                 if (dev->ext->irq_mask & isr) {
 310                         if (dev->ext->irq_func)
 311                                 dev->ext->irq_func(dev, &isr);
 312                         isr &= ~dev->ext->irq_mask;
 313                 }
 314         }
 315         if (0 != (isr & (MASK_27))) {
 316                 DEB_INT("irq: RPS0 (0x%08x)\n", isr);
 317                 if (dev->vv_data && dev->vv_callback)
 318                         dev->vv_callback(dev,isr);
 319                 isr &= ~MASK_27;
 320         }
 321         if (0 != (isr & (MASK_28))) {
 322                 if (dev->vv_data && dev->vv_callback)
 323                         dev->vv_callback(dev,isr);
 324                 isr &= ~MASK_28;
 325         }
 326         if (0 != (isr & (MASK_16|MASK_17))) {
 327                 SAA7146_IER_DISABLE(dev, MASK_16|MASK_17);
 328                 /* only wake up if we expect something */
 329                 if (0 != dev->i2c_op) {
 330                         dev->i2c_op = 0;
 331                         wake_up(&dev->i2c_wq);
 332                 } else {
 333                         u32 psr = saa7146_read(dev, PSR);
 334                         u32 ssr = saa7146_read(dev, SSR);
 335                         pr_warn("%s: unexpected i2c irq: isr %08x psr %08x ssr %08x\n",
 336                                 dev->name, isr, psr, ssr);
 337                 }
 338                 isr &= ~(MASK_16|MASK_17);
 339         }
 340         if( 0 != isr ) {
 341                 ERR("warning: interrupt enabled, but not handled properly.(0x%08x)\n",
 342                     isr);
 343                 ERR("disabling interrupt source(s)!\n");
 344                 SAA7146_IER_DISABLE(dev,isr);
 345         }
 346         saa7146_write(dev, ISR, ack_isr);
 347         return IRQ_HANDLED;
 348 }
 349
 350 /*********************************************************************************/
 351 /* configuration-functions                                                       */
 352
 353 static int saa7146_init_one(struct pci_dev *pci, const struct pci_device_id *ent)
 354 {
 355         struct saa7146_pci_extension_data *pci_ext = (struct saa7146_pci_extension_data *)ent->driver_data;
 356         struct saa7146_extension *ext = pci_ext->ext;
 357         struct saa7146_dev *dev;
 358         int err = -ENOMEM;
 359
 360         /* clear out mem for sure */
 361         dev = kzalloc(sizeof(struct saa7146_dev), GFP_KERNEL);
 362         if (!dev) {
 363                 ERR("out of memory\n");
 364                 goto out;
 365         }
 366
 367         /* create a nice device name */
 368         sprintf(dev->name, "saa7146 (%d)", saa7146_num);
 369
 370         DEB_EE("pci:%p\n", pci);
 371
 372         err = pci_enable_device(pci);
 373         if (err < 0) {
 374                 ERR("pci_enable_device() failed\n");
 375                 goto err_free;
 376         }
 377
 378         /* enable bus-mastering */
 379         pci_set_master(pci);
 380
 381         dev->pci = pci;
 382
 383         /* get chip-revision; this is needed to enable bug-fixes */
 384         dev->revision = pci->revision;
 385
 386         /* remap the memory from virtual to physical address */
 387
 388         err = pci_request_region(pci, 0, "saa7146");
 389         if (err < 0)
 390                 goto err_disable;
 391
 392         dev->mem = ioremap(pci_resource_start(pci, 0),
 393                            pci_resource_len(pci, 0));
 394         if (!dev->mem) {
 395                 ERR("ioremap() failed\n");
 396                 err = -ENODEV;
 397                 goto err_release;
 398         }
 399
 400         /* we don't do a master reset here anymore, it screws up
 401            some boards that don't have an i2c-eeprom for configuration
 402            values */
 403 /*
 404         saa7146_write(dev, MC1, MASK_31);
 405 */
 406
 407         /* disable all irqs */
 408         saa7146_write(dev, IER, 0);
 409
 410         /* shut down all dma transfers and rps tasks */
 411         saa7146_write(dev, MC1, 0x30ff0000);
 412
 413         /* clear out any rps-signals pending */
 414         saa7146_write(dev, MC2, 0xf8000000);
 415
 416         /* request an interrupt for the saa7146 */
 417         err = request_irq(pci->irq, interrupt_hw, IRQF_SHARED,
 418                           dev->name, dev);
 419         if (err < 0) {
 420                 ERR("request_irq() failed\n");
 421                 goto err_unmap;
 422         }
 423
 424         err = -ENOMEM;
 425
 426         /* get memory for various stuff */
 427         dev->d_rps0.cpu_addr = pci_zalloc_consistent(pci, SAA7146_RPS_MEM,
 428                                                      &dev->d_rps0.dma_handle);
 429         if (!dev->d_rps0.cpu_addr)
 430                 goto err_free_irq;
 431
 432         dev->d_rps1.cpu_addr = pci_zalloc_consistent(pci, SAA7146_RPS_MEM,
 433                                                      &dev->d_rps1.dma_handle);
 434         if (!dev->d_rps1.cpu_addr)
 435                 goto err_free_rps0;
 436
 437         dev->d_i2c.cpu_addr = pci_zalloc_consistent(pci, SAA7146_RPS_MEM,
 438                                                     &dev->d_i2c.dma_handle);
 439         if (!dev->d_i2c.cpu_addr)
 440                 goto err_free_rps1;
 441
 442         /* the rest + print status message */
 443
 444         pr_info("found saa7146 @ mem %p (revision %d, irq %d) (0x%04x,0x%04x)\n",
 445                 dev->mem, dev->revision, pci->irq,
 446                 pci->subsystem_vendor, pci->subsystem_device);
 447         dev->ext = ext;
 448
 449         mutex_init(&dev->v4l2_lock);
 450         spin_lock_init(&dev->int_slock);
 451         spin_lock_init(&dev->slock);
 452
 453         mutex_init(&dev->i2c_lock);
 454
 455         dev->module = THIS_MODULE;
 456         init_waitqueue_head(&dev->i2c_wq);
 457
 458         /* set some sane pci arbitrition values */
 459         saa7146_write(dev, PCI_BT_V1, 0x1c00101f);
 460
 461         /* TODO: use the status code of the callback */
 462
 463         err = -ENODEV;
 464
 465         if (ext->probe && ext->probe(dev)) {
 466                 DEB_D("ext->probe() failed for %p. skipping device.\n", dev);
 467                 goto err_free_i2c;
 468         }
 469
 470         if (ext->attach(dev, pci_ext)) {
 471                 DEB_D("ext->attach() failed for %p. skipping device.\n", dev);
 472                 goto err_free_i2c;
 473         }
 474         /* V4L extensions will set the pci drvdata to the v4l2_device in the
 475            attach() above. So for those cards that do not use V4L we have to
 476            set it explicitly. */
 477         pci_set_drvdata(pci, &dev->v4l2_dev);
 478
 479         saa7146_num++;
 480
 481         err = 0;
 482 out:
 483         return err;
 484
 485 err_free_i2c:
 486         pci_free_consistent(pci, SAA7146_RPS_MEM, dev->d_i2c.cpu_addr,
 487                             dev->d_i2c.dma_handle);
 488 err_free_rps1:
 489         pci_free_consistent(pci, SAA7146_RPS_MEM, dev->d_rps1.cpu_addr,
 490                             dev->d_rps1.dma_handle);
 491 err_free_rps0:
 492         pci_free_consistent(pci, SAA7146_RPS_MEM, dev->d_rps0.cpu_addr,
 493                             dev->d_rps0.dma_handle);
 494 err_free_irq:
 495         free_irq(pci->irq, (void *)dev);
 496 err_unmap:
 497         iounmap(dev->mem);
 498 err_release:
 499         pci_release_region(pci, 0);
 500 err_disable:
 501         pci_disable_device(pci);
 502 err_free:
 503         kfree(dev);
 504         goto out;
 505 }
 506
 507 static void saa7146_remove_one(struct pci_dev *pdev)
 508 {
 509         struct v4l2_device *v4l2_dev = pci_get_drvdata(pdev);
 510         struct saa7146_dev *dev = to_saa7146_dev(v4l2_dev);
 511         struct {
 512                 void *addr;
 513                 dma_addr_t dma;
 514         } dev_map[] = {
 515                 { dev->d_i2c.cpu_addr, dev->d_i2c.dma_handle },
 516                 { dev->d_rps1.cpu_addr, dev->d_rps1.dma_handle },
 517                 { dev->d_rps0.cpu_addr, dev->d_rps0.dma_handle },
 518                 { NULL, 0 }
 519         }, *p;
 520
 521         DEB_EE("dev:%p\n", dev);
 522
 523         dev->ext->detach(dev);
 524
 525         /* shut down all video dma transfers */
 526         saa7146_write(dev, MC1, 0x00ff0000);
 527
 528         /* disable all irqs, release irq-routine */
 529         saa7146_write(dev, IER, 0);
 530
 531         free_irq(pdev->irq, dev);
 532
 533         for (p = dev_map; p->addr; p++)
 534                 pci_free_consistent(pdev, SAA7146_RPS_MEM, p->addr, p->dma);
 535
 536         iounmap(dev->mem);
 537         pci_release_region(pdev, 0);
 538         pci_disable_device(pdev);
 539         kfree(dev);
 540
 541         saa7146_num--;
 542 }
 543
 544 /*********************************************************************************/
 545 /* extension handling functions                                                  */
 546
 547 int saa7146_register_extension(struct saa7146_extension* ext)
 548 {
 549         DEB_EE("ext:%p\n", ext);
 550
 551         ext->driver.name = ext->name;
 552         ext->driver.id_table = ext->pci_tbl;
 553         ext->driver.probe = saa7146_init_one;
 554         ext->driver.remove = saa7146_remove_one;
 555
 556         pr_info("register extension '%s'\n", ext->name);
 557         return pci_register_driver(&ext->driver);
 558 }
 559
 560 int saa7146_unregister_extension(struct saa7146_extension* ext)
 561 {
 562         DEB_EE("ext:%p\n", ext);
 563         pr_info("unregister extension '%s'\n", ext->name);
 564         pci_unregister_driver(&ext->driver);
 565         return 0;
 566 }
 567
 568 EXPORT_SYMBOL_GPL(saa7146_register_extension);
 569 EXPORT_SYMBOL_GPL(saa7146_unregister_extension);
 570
 571 /* misc functions used by extension modules */
 572 EXPORT_SYMBOL_GPL(saa7146_pgtable_alloc);
 573 EXPORT_SYMBOL_GPL(saa7146_pgtable_free);
 574 EXPORT_SYMBOL_GPL(saa7146_pgtable_build_single);
 575 EXPORT_SYMBOL_GPL(saa7146_vmalloc_build_pgtable);
 576 EXPORT_SYMBOL_GPL(saa7146_vfree_destroy_pgtable);
 577 EXPORT_SYMBOL_GPL(saa7146_wait_for_debi_done);
 578
 579 EXPORT_SYMBOL_GPL(saa7146_setgpio);
 580
 581 EXPORT_SYMBOL_GPL(saa7146_i2c_adapter_prepare);
 582
 583 EXPORT_SYMBOL_GPL(saa7146_debug);
 584
 585 MODULE_AUTHOR("Michael Hunold <michael@mihu.de>");
 586 MODULE_DESCRIPTION("driver for generic saa7146-based hardware");
 587 MODULE_LICENSE("GPL");