drivers/media/i2c/ak881x.c

   1 /*
   2  * Driver for AK8813 / AK8814 TV-ecoders from Asahi Kasei Microsystems Co., Ltd. (AKM)
   3  *
   4  * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  */
  10
  11 #include <linux/i2c.h>
  12 #include <linux/init.h>
  13 #include <linux/platform_device.h>
  14 #include <linux/slab.h>
  15 #include <linux/videodev2.h>
  16 #include <linux/module.h>
  17
  18 #include <media/i2c/ak881x.h>
  19 #include <media/v4l2-common.h>
  20 #include <media/v4l2-device.h>
  21
  22 #define AK881X_INTERFACE_MODE   0
  23 #define AK881X_VIDEO_PROCESS1   1
  24 #define AK881X_VIDEO_PROCESS2   2
  25 #define AK881X_VIDEO_PROCESS3   3
  26 #define AK881X_DAC_MODE         5
  27 #define AK881X_STATUS           0x24
  28 #define AK881X_DEVICE_ID        0x25
  29 #define AK881X_DEVICE_REVISION  0x26
  30
  31 struct ak881x {
  32         struct v4l2_subdev subdev;
  33         struct ak881x_pdata *pdata;
  34         unsigned int lines;
  35         char revision;  /* DEVICE_REVISION content */
  36 };
  37
  38 static int reg_read(struct i2c_client *client, const u8 reg)
  39 {
  40         return i2c_smbus_read_byte_data(client, reg);
  41 }
  42
  43 static int reg_write(struct i2c_client *client, const u8 reg,
  44                      const u8 data)
  45 {
  46         return i2c_smbus_write_byte_data(client, reg, data);
  47 }
  48
  49 static int reg_set(struct i2c_client *client, const u8 reg,
  50                    const u8 data, u8 mask)
  51 {
  52         int ret = reg_read(client, reg);
  53         if (ret < 0)
  54                 return ret;
  55         return reg_write(client, reg, (ret & ~mask) | (data & mask));
  56 }
  57
  58 static struct ak881x *to_ak881x(const struct i2c_client *client)
  59 {
  60         return container_of(i2c_get_clientdata(client), struct ak881x, subdev);
  61 }
  62
  63 #ifdef CONFIG_VIDEO_ADV_DEBUG
  64 static int ak881x_g_register(struct v4l2_subdev *sd,
  65                              struct v4l2_dbg_register *reg)
  66 {
  67         struct i2c_client *client = v4l2_get_subdevdata(sd);
  68
  69         if (reg->reg > 0x26)
  70                 return -EINVAL;
  71
  72         reg->size = 1;
  73         reg->val = reg_read(client, reg->reg);
  74
  75         if (reg->val > 0xffff)
  76                 return -EIO;
  77
  78         return 0;
  79 }
  80
  81 static int ak881x_s_register(struct v4l2_subdev *sd,
  82                              const struct v4l2_dbg_register *reg)
  83 {
  84         struct i2c_client *client = v4l2_get_subdevdata(sd);
  85
  86         if (reg->reg > 0x26)
  87                 return -EINVAL;
  88
  89         if (reg_write(client, reg->reg, reg->val) < 0)
  90                 return -EIO;
  91
  92         return 0;
  93 }
  94 #endif
  95
  96 static int ak881x_fill_fmt(struct v4l2_subdev *sd,
  97                 struct v4l2_subdev_pad_config *cfg,
  98                 struct v4l2_subdev_format *format)
  99 {
 100         struct v4l2_mbus_framefmt *mf = &format->format;
 101         struct i2c_client *client = v4l2_get_subdevdata(sd);
 102         struct ak881x *ak881x = to_ak881x(client);
 103
 104         if (format->pad)
 105                 return -EINVAL;
 106
 107         v4l_bound_align_image(&mf->width, 0, 720, 2,
 108                               &mf->height, 0, ak881x->lines, 1, 0);
 109         mf->field       = V4L2_FIELD_INTERLACED;
 110         mf->code        = MEDIA_BUS_FMT_YUYV8_2X8;
 111         mf->colorspace  = V4L2_COLORSPACE_SMPTE170M;
 112
 113         return 0;
 114 }
 115
 116 static int ak881x_enum_mbus_code(struct v4l2_subdev *sd,
 117                 struct v4l2_subdev_pad_config *cfg,
 118                 struct v4l2_subdev_mbus_code_enum *code)
 119 {
 120         if (code->pad || code->index)
 121                 return -EINVAL;
 122
 123         code->code = MEDIA_BUS_FMT_YUYV8_2X8;
 124         return 0;
 125 }
 126
 127 static int ak881x_get_selection(struct v4l2_subdev *sd,
 128                                 struct v4l2_subdev_pad_config *cfg,
 129                                 struct v4l2_subdev_selection *sel)
 130 {
 131         struct i2c_client *client = v4l2_get_subdevdata(sd);
 132         struct ak881x *ak881x = to_ak881x(client);
 133
 134         if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
 135                 return -EINVAL;
 136
 137         switch (sel->target) {
 138         case V4L2_SEL_TGT_CROP_BOUNDS:
 139         case V4L2_SEL_TGT_CROP_DEFAULT:
 140                 sel->r.left = 0;
 141                 sel->r.top = 0;
 142                 sel->r.width = 720;
 143                 sel->r.height = ak881x->lines;
 144                 return 0;
 145         default:
 146                 return -EINVAL;
 147         }
 148 }
 149
 150 static int ak881x_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std)
 151 {
 152         struct i2c_client *client = v4l2_get_subdevdata(sd);
 153         struct ak881x *ak881x = to_ak881x(client);
 154         u8 vp1;
 155
 156         if (std == V4L2_STD_NTSC_443) {
 157                 vp1 = 3;
 158                 ak881x->lines = 480;
 159         } else if (std == V4L2_STD_PAL_M) {
 160                 vp1 = 5;
 161                 ak881x->lines = 480;
 162         } else if (std == V4L2_STD_PAL_60) {
 163                 vp1 = 7;
 164                 ak881x->lines = 480;
 165         } else if (std & V4L2_STD_NTSC) {
 166                 vp1 = 0;
 167                 ak881x->lines = 480;
 168         } else if (std & V4L2_STD_PAL) {
 169                 vp1 = 0xf;
 170                 ak881x->lines = 576;
 171         } else {
 172                 /* No SECAM or PAL_N/Nc supported */
 173                 return -EINVAL;
 174         }
 175
 176         reg_set(client, AK881X_VIDEO_PROCESS1, vp1, 0xf);
 177
 178         return 0;
 179 }
 180
 181 static int ak881x_s_stream(struct v4l2_subdev *sd, int enable)
 182 {
 183         struct i2c_client *client = v4l2_get_subdevdata(sd);
 184         struct ak881x *ak881x = to_ak881x(client);
 185
 186         if (enable) {
 187                 u8 dac;
 188                 /* For colour-bar testing set bit 6 of AK881X_VIDEO_PROCESS1 */
 189                 /* Default: composite output */
 190                 if (ak881x->pdata->flags & AK881X_COMPONENT)
 191                         dac = 3;
 192                 else
 193                         dac = 4;
 194                 /* Turn on the DAC(s) */
 195                 reg_write(client, AK881X_DAC_MODE, dac);
 196                 dev_dbg(&client->dev, "chip status 0x%x\n",
 197                         reg_read(client, AK881X_STATUS));
 198         } else {
 199                 /* ...and clear bit 6 of AK881X_VIDEO_PROCESS1 here */
 200                 reg_write(client, AK881X_DAC_MODE, 0);
 201                 dev_dbg(&client->dev, "chip status 0x%x\n",
 202                         reg_read(client, AK881X_STATUS));
 203         }
 204
 205         return 0;
 206 }
 207
 208 static const struct v4l2_subdev_core_ops ak881x_subdev_core_ops = {
 209 #ifdef CONFIG_VIDEO_ADV_DEBUG
 210         .g_register     = ak881x_g_register,
 211         .s_register     = ak881x_s_register,
 212 #endif
 213 };
 214
 215 static const struct v4l2_subdev_video_ops ak881x_subdev_video_ops = {
 216         .s_std_output   = ak881x_s_std_output,
 217         .s_stream       = ak881x_s_stream,
 218 };
 219
 220 static const struct v4l2_subdev_pad_ops ak881x_subdev_pad_ops = {
 221         .enum_mbus_code = ak881x_enum_mbus_code,
 222         .get_selection  = ak881x_get_selection,
 223         .set_fmt        = ak881x_fill_fmt,
 224         .get_fmt        = ak881x_fill_fmt,
 225 };
 226
 227 static const struct v4l2_subdev_ops ak881x_subdev_ops = {
 228         .core   = &ak881x_subdev_core_ops,
 229         .video  = &ak881x_subdev_video_ops,
 230         .pad    = &ak881x_subdev_pad_ops,
 231 };
 232
 233 static int ak881x_probe(struct i2c_client *client,
 234                         const struct i2c_device_id *did)
 235 {
 236         struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
 237         struct ak881x *ak881x;
 238         u8 ifmode, data;
 239
 240         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
 241                 dev_warn(&adapter->dev,
 242                          "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n");
 243                 return -EIO;
 244         }
 245
 246         ak881x = devm_kzalloc(&client->dev, sizeof(*ak881x), GFP_KERNEL);
 247         if (!ak881x)
 248                 return -ENOMEM;
 249
 250         v4l2_i2c_subdev_init(&ak881x->subdev, client, &ak881x_subdev_ops);
 251
 252         data = reg_read(client, AK881X_DEVICE_ID);
 253
 254         switch (data) {
 255         case 0x13:
 256         case 0x14:
 257                 break;
 258         default:
 259                 dev_err(&client->dev,
 260                         "No ak881x chip detected, register read %x\n", data);
 261                 return -ENODEV;
 262         }
 263
 264         ak881x->revision = reg_read(client, AK881X_DEVICE_REVISION);
 265         ak881x->pdata = client->dev.platform_data;
 266
 267         if (ak881x->pdata) {
 268                 if (ak881x->pdata->flags & AK881X_FIELD)
 269                         ifmode = 4;
 270                 else
 271                         ifmode = 0;
 272
 273                 switch (ak881x->pdata->flags & AK881X_IF_MODE_MASK) {
 274                 case AK881X_IF_MODE_BT656:
 275                         ifmode |= 1;
 276                         break;
 277                 case AK881X_IF_MODE_MASTER:
 278                         ifmode |= 2;
 279                         break;
 280                 case AK881X_IF_MODE_SLAVE:
 281                 default:
 282                         break;
 283                 }
 284
 285                 dev_dbg(&client->dev, "IF mode %x\n", ifmode);
 286
 287                 /*
 288                  * "Line Blanking No." seems to be the same as the number of
 289                  * "black" lines on, e.g., SuperH VOU, whose default value of 20
 290                  * "incidentally" matches ak881x' default
 291                  */
 292                 reg_write(client, AK881X_INTERFACE_MODE, ifmode | (20 << 3));
 293         }
 294
 295         /* Hardware default: NTSC-M */
 296         ak881x->lines = 480;
 297
 298         dev_info(&client->dev, "Detected an ak881x chip ID %x, revision %x\n",
 299                  data, ak881x->revision);
 300
 301         return 0;
 302 }
 303
 304 static int ak881x_remove(struct i2c_client *client)
 305 {
 306         struct ak881x *ak881x = to_ak881x(client);
 307
 308         v4l2_device_unregister_subdev(&ak881x->subdev);
 309
 310         return 0;
 311 }
 312
 313 static const struct i2c_device_id ak881x_id[] = {
 314         { "ak8813", 0 },
 315         { "ak8814", 0 },
 316         { }
 317 };
 318 MODULE_DEVICE_TABLE(i2c, ak881x_id);
 319
 320 static struct i2c_driver ak881x_i2c_driver = {
 321         .driver = {
 322                 .name = "ak881x",
 323         },
 324         .probe          = ak881x_probe,
 325         .remove         = ak881x_remove,
 326         .id_table       = ak881x_id,
 327 };
 328
 329 module_i2c_driver(ak881x_i2c_driver);
 330
 331 MODULE_DESCRIPTION("TV-output driver for ak8813/ak8814");
 332 MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
 333 MODULE_LICENSE("GPL v2");