Linux 4.19.133

[linux/fpc-iii.git] / drivers / media / pci / sta2x11 / sta2x11_vip.c

/*
 * This is the driver for the STA2x11 Video Input Port.
 *
 * Copyright (C) 2012       ST Microelectronics
 *     author: Federico Vaga <federico.vaga@gmail.com>
 * Copyright (C) 2010       WindRiver Systems, Inc.
 *     authors: Andreas Kies <andreas.kies@windriver.com>
 *              Vlad Lungu   <vlad.lungu@windriver.com>
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
 * version 2, as published by the Free Software Foundation.
 *
 * This program is distributed in the hope it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * The full GNU General Public License is included in this distribution in
 * the file called "COPYING".
 *
 */

#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/videodev2.h>
#include <linux/kmod.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/delay.h>
#include <media/v4l2-common.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-ioctl.h>
#include <media/v4l2-fh.h>
#include <media/v4l2-event.h>
#include <media/videobuf2-dma-contig.h>

#include "sta2x11_vip.h"

#define DRV_VERSION "1.3"

#ifndef PCI_DEVICE_ID_STMICRO_VIP
#define PCI_DEVICE_ID_STMICRO_VIP 0xCC0D
#endif

#define MAX_FRAMES 4

/*Register offsets*/
#define DVP_CTL         0x00
#define DVP_TFO         0x04
#define DVP_TFS         0x08
#define DVP_BFO         0x0C
#define DVP_BFS         0x10
#define DVP_VTP         0x14
#define DVP_VBP         0x18
#define DVP_VMP         0x1C
#define DVP_ITM         0x98
#define DVP_ITS         0x9C
#define DVP_STA         0xA0
#define DVP_HLFLN       0xA8
#define DVP_RGB         0xC0
#define DVP_PKZ         0xF0

/*Register fields*/
#define DVP_CTL_ENA     0x00000001
#define DVP_CTL_RST     0x80000000
#define DVP_CTL_DIS     (~0x00040001)

#define DVP_IT_VSB      0x00000008
#define DVP_IT_VST      0x00000010
#define DVP_IT_FIFO     0x00000020

#define DVP_HLFLN_SD    0x00000001

#define SAVE_COUNT 8
#define AUX_COUNT 3
#define IRQ_COUNT 1


struct vip_buffer {
        struct vb2_v4l2_buffer vb;
        struct list_head        list;
        dma_addr_t              dma;
};
static inline struct vip_buffer *to_vip_buffer(struct vb2_v4l2_buffer *vb2)
{
        return container_of(vb2, struct vip_buffer, vb);
}

/**
 * struct sta2x11_vip - All internal data for one instance of device
 * @v4l2_dev: device registered in v4l layer
 * @video_dev: properties of our device
 * @pdev: PCI device
 * @adapter: contains I2C adapter information
 * @register_save_area: All relevant register are saved here during suspend
 * @decoder: contains information about video DAC
 * @ctrl_hdl: handler for control framework
 * @format: pixel format, fixed UYVY
 * @std: video standard (e.g. PAL/NTSC)
 * @input: input line for video signal ( 0 or 1 )
 * @disabled: Device is in power down state
 * @slock: for excluse acces of registers
 * @vb_vidq: queue maintained by videobuf2 layer
 * @buffer_list: list of buffer in use
 * @sequence: sequence number of acquired buffer
 * @active: current active buffer
 * @lock: used in videobuf2 callback
 * @v4l_lock: serialize its video4linux ioctls
 * @tcount: Number of top frames
 * @bcount: Number of bottom frames
 * @overflow: Number of FIFO overflows
 * @iomem: hardware base address
 * @config: I2C and gpio config from platform
 *
 * All non-local data is accessed via this structure.
 */
struct sta2x11_vip {
        struct v4l2_device v4l2_dev;
        struct video_device video_dev;
        struct pci_dev *pdev;
        struct i2c_adapter *adapter;
        unsigned int register_save_area[IRQ_COUNT + SAVE_COUNT + AUX_COUNT];
        struct v4l2_subdev *decoder;
        struct v4l2_ctrl_handler ctrl_hdl;


        struct v4l2_pix_format format;
        v4l2_std_id std;
        unsigned int input;
        int disabled;
        spinlock_t slock;

        struct vb2_queue vb_vidq;
        struct list_head buffer_list;
        unsigned int sequence;
        struct vip_buffer *active; /* current active buffer */
        spinlock_t lock; /* Used in videobuf2 callback */
        struct mutex v4l_lock;

        /* Interrupt counters */
        int tcount, bcount;
        int overflow;

        void __iomem *iomem;    /* I/O Memory */
        struct vip_config *config;
};

static const unsigned int registers_to_save[AUX_COUNT] = {
        DVP_HLFLN, DVP_RGB, DVP_PKZ
};

static struct v4l2_pix_format formats_50[] = {
        {                       /*PAL interlaced */
         .width = 720,
         .height = 576,
         .pixelformat = V4L2_PIX_FMT_UYVY,
         .field = V4L2_FIELD_INTERLACED,
         .bytesperline = 720 * 2,
         .sizeimage = 720 * 2 * 576,
         .colorspace = V4L2_COLORSPACE_SMPTE170M},
        {                       /*PAL top */
         .width = 720,
         .height = 288,
         .pixelformat = V4L2_PIX_FMT_UYVY,
         .field = V4L2_FIELD_TOP,
         .bytesperline = 720 * 2,
         .sizeimage = 720 * 2 * 288,
         .colorspace = V4L2_COLORSPACE_SMPTE170M},
        {                       /*PAL bottom */
         .width = 720,
         .height = 288,
         .pixelformat = V4L2_PIX_FMT_UYVY,
         .field = V4L2_FIELD_BOTTOM,
         .bytesperline = 720 * 2,
         .sizeimage = 720 * 2 * 288,
         .colorspace = V4L2_COLORSPACE_SMPTE170M},

};

static struct v4l2_pix_format formats_60[] = {
        {                       /*NTSC interlaced */
         .width = 720,
         .height = 480,
         .pixelformat = V4L2_PIX_FMT_UYVY,
         .field = V4L2_FIELD_INTERLACED,
         .bytesperline = 720 * 2,
         .sizeimage = 720 * 2 * 480,
         .colorspace = V4L2_COLORSPACE_SMPTE170M},
        {                       /*NTSC top */
         .width = 720,
         .height = 240,
         .pixelformat = V4L2_PIX_FMT_UYVY,
         .field = V4L2_FIELD_TOP,
         .bytesperline = 720 * 2,
         .sizeimage = 720 * 2 * 240,
         .colorspace = V4L2_COLORSPACE_SMPTE170M},
        {                       /*NTSC bottom */
         .width = 720,
         .height = 240,
         .pixelformat = V4L2_PIX_FMT_UYVY,
         .field = V4L2_FIELD_BOTTOM,
         .bytesperline = 720 * 2,
         .sizeimage = 720 * 2 * 240,
         .colorspace = V4L2_COLORSPACE_SMPTE170M},
};

/* Write VIP register */
static inline void reg_write(struct sta2x11_vip *vip, unsigned int reg, u32 val)
{
        iowrite32((val), (vip->iomem)+(reg));
}
/* Read VIP register */
static inline u32 reg_read(struct sta2x11_vip *vip, unsigned int reg)
{
        return  ioread32((vip->iomem)+(reg));
}
/* Start DMA acquisition */
static void start_dma(struct sta2x11_vip *vip, struct vip_buffer *vip_buf)
{
        unsigned long offset = 0;

        if (vip->format.field == V4L2_FIELD_INTERLACED)
                offset = vip->format.width * 2;

        spin_lock_irq(&vip->slock);
        /* Enable acquisition */
        reg_write(vip, DVP_CTL, reg_read(vip, DVP_CTL) | DVP_CTL_ENA);
        /* Set Top and Bottom Field memory address */
        reg_write(vip, DVP_VTP, (u32)vip_buf->dma);
        reg_write(vip, DVP_VBP, (u32)vip_buf->dma + offset);
        spin_unlock_irq(&vip->slock);
}

/* Fetch the next buffer to activate */
static void vip_active_buf_next(struct sta2x11_vip *vip)
{
        /* Get the next buffer */
        spin_lock(&vip->lock);
        if (list_empty(&vip->buffer_list)) {/* No available buffer */
                spin_unlock(&vip->lock);
                return;
        }
        vip->active = list_first_entry(&vip->buffer_list,
                                       struct vip_buffer,
                                       list);
        /* Reset Top and Bottom counter */
        vip->tcount = 0;
        vip->bcount = 0;
        spin_unlock(&vip->lock);
        if (vb2_is_streaming(&vip->vb_vidq)) {  /* streaming is on */
                start_dma(vip, vip->active);    /* start dma capture */
        }
}


/* Videobuf2 Operations */
static int queue_setup(struct vb2_queue *vq,
                       unsigned int *nbuffers, unsigned int *nplanes,
                       unsigned int sizes[], struct device *alloc_devs[])
{
        struct sta2x11_vip *vip = vb2_get_drv_priv(vq);

        if (!(*nbuffers) || *nbuffers < MAX_FRAMES)
                *nbuffers = MAX_FRAMES;

        *nplanes = 1;
        sizes[0] = vip->format.sizeimage;

        vip->sequence = 0;
        vip->active = NULL;
        vip->tcount = 0;
        vip->bcount = 0;

        return 0;
};
static int buffer_init(struct vb2_buffer *vb)
{
        struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
        struct vip_buffer *vip_buf = to_vip_buffer(vbuf);

        vip_buf->dma = vb2_dma_contig_plane_dma_addr(vb, 0);
        INIT_LIST_HEAD(&vip_buf->list);
        return 0;
}

static int buffer_prepare(struct vb2_buffer *vb)
{
        struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
        struct sta2x11_vip *vip = vb2_get_drv_priv(vb->vb2_queue);
        struct vip_buffer *vip_buf = to_vip_buffer(vbuf);
        unsigned long size;

        size = vip->format.sizeimage;
        if (vb2_plane_size(vb, 0) < size) {
                v4l2_err(&vip->v4l2_dev, "buffer too small (%lu < %lu)\n",
                         vb2_plane_size(vb, 0), size);
                return -EINVAL;
        }

        vb2_set_plane_payload(&vip_buf->vb.vb2_buf, 0, size);

        return 0;
}
static void buffer_queue(struct vb2_buffer *vb)
{
        struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
        struct sta2x11_vip *vip = vb2_get_drv_priv(vb->vb2_queue);
        struct vip_buffer *vip_buf = to_vip_buffer(vbuf);

        spin_lock(&vip->lock);
        list_add_tail(&vip_buf->list, &vip->buffer_list);
        if (!vip->active) {     /* No active buffer, active the first one */
                vip->active = list_first_entry(&vip->buffer_list,
                                               struct vip_buffer,
                                               list);
                if (vb2_is_streaming(&vip->vb_vidq))    /* streaming is on */
                        start_dma(vip, vip_buf);        /* start dma capture */
        }
        spin_unlock(&vip->lock);
}
static void buffer_finish(struct vb2_buffer *vb)
{
        struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
        struct sta2x11_vip *vip = vb2_get_drv_priv(vb->vb2_queue);
        struct vip_buffer *vip_buf = to_vip_buffer(vbuf);

        /* Buffer handled, remove it from the list */
        spin_lock(&vip->lock);
        list_del_init(&vip_buf->list);
        spin_unlock(&vip->lock);

        if (vb2_is_streaming(vb->vb2_queue))
                vip_active_buf_next(vip);
}

static int start_streaming(struct vb2_queue *vq, unsigned int count)
{
        struct sta2x11_vip *vip = vb2_get_drv_priv(vq);

        spin_lock_irq(&vip->slock);
        /* Enable interrupt VSYNC Top and Bottom*/
        reg_write(vip, DVP_ITM, DVP_IT_VSB | DVP_IT_VST);
        spin_unlock_irq(&vip->slock);

        if (count)
                start_dma(vip, vip->active);

        return 0;
}

/* abort streaming and wait for last buffer */
static void stop_streaming(struct vb2_queue *vq)
{
        struct sta2x11_vip *vip = vb2_get_drv_priv(vq);
        struct vip_buffer *vip_buf, *node;

        /* Disable acquisition */
        reg_write(vip, DVP_CTL, reg_read(vip, DVP_CTL) & ~DVP_CTL_ENA);
        /* Disable all interrupts */
        reg_write(vip, DVP_ITM, 0);

        /* Release all active buffers */
        spin_lock(&vip->lock);
        list_for_each_entry_safe(vip_buf, node, &vip->buffer_list, list) {
                vb2_buffer_done(&vip_buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
                list_del(&vip_buf->list);
        }
        spin_unlock(&vip->lock);
}

static const struct vb2_ops vip_video_qops = {
        .queue_setup            = queue_setup,
        .buf_init               = buffer_init,
        .buf_prepare            = buffer_prepare,
        .buf_finish             = buffer_finish,
        .buf_queue              = buffer_queue,
        .start_streaming        = start_streaming,
        .stop_streaming         = stop_streaming,
        .wait_prepare           = vb2_ops_wait_prepare,
        .wait_finish            = vb2_ops_wait_finish,
};


/* File Operations */
static const struct v4l2_file_operations vip_fops = {
        .owner = THIS_MODULE,
        .open = v4l2_fh_open,
        .release = vb2_fop_release,
        .unlocked_ioctl = video_ioctl2,
        .read = vb2_fop_read,
        .mmap = vb2_fop_mmap,
        .poll = vb2_fop_poll
};


/**
 * vidioc_querycap - return capabilities of device
 * @file: descriptor of device
 * @cap: contains return values
 * @priv: unused
 *
 * the capabilities of the device are returned
 *
 * return value: 0, no error.
 */
static int vidioc_querycap(struct file *file, void *priv,
                           struct v4l2_capability *cap)
{
        struct sta2x11_vip *vip = video_drvdata(file);

        strcpy(cap->driver, KBUILD_MODNAME);
        strcpy(cap->card, KBUILD_MODNAME);
        snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s",
                 pci_name(vip->pdev));
        cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
                           V4L2_CAP_STREAMING;
        cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;

        return 0;
}

/**
 * vidioc_s_std - set video standard
 * @file: descriptor of device
 * @std: contains standard to be set
 * @priv: unused
 *
 * the video standard is set
 *
 * return value: 0, no error.
 *
 * -EIO, no input signal detected
 *
 * other, returned from video DAC.
 */
static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id std)
{
        struct sta2x11_vip *vip = video_drvdata(file);

        /*
         * This is here for backwards compatibility only.
         * The use of V4L2_STD_ALL to trigger a querystd is non-standard.
         */
        if (std == V4L2_STD_ALL) {
                v4l2_subdev_call(vip->decoder, video, querystd, &std);
                if (std == V4L2_STD_UNKNOWN)
                        return -EIO;
        }

        if (vip->std != std) {
                vip->std = std;
                if (V4L2_STD_525_60 & std)
                        vip->format = formats_60[0];
                else
                        vip->format = formats_50[0];
        }

        return v4l2_subdev_call(vip->decoder, video, s_std, std);
}

/**
 * vidioc_g_std - get video standard
 * @file: descriptor of device
 * @priv: unused
 * @std: contains return values
 *
 * the current video standard is returned
 *
 * return value: 0, no error.
 */
static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *std)
{
        struct sta2x11_vip *vip = video_drvdata(file);

        *std = vip->std;
        return 0;
}

/**
 * vidioc_querystd - get possible video standards
 * @file: descriptor of device
 * @priv: unused
 * @std: contains return values
 *
 * all possible video standards are returned
 *
 * return value: delivered by video DAC routine.
 */
static int vidioc_querystd(struct file *file, void *priv, v4l2_std_id *std)
{
        struct sta2x11_vip *vip = video_drvdata(file);

        return v4l2_subdev_call(vip->decoder, video, querystd, std);
}

static int vidioc_enum_input(struct file *file, void *priv,
                             struct v4l2_input *inp)
{
        if (inp->index > 1)
                return -EINVAL;

        inp->type = V4L2_INPUT_TYPE_CAMERA;
        inp->std = V4L2_STD_ALL;
        sprintf(inp->name, "Camera %u", inp->index);

        return 0;
}

/**
 * vidioc_s_input - set input line
 * @file: descriptor of device
 * @priv: unused
 * @i: new input line number
 *
 * the current active input line is set
 *
 * return value: 0, no error.
 *
 * -EINVAL, line number out of range
 */
static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
{
        struct sta2x11_vip *vip = video_drvdata(file);
        int ret;

        if (i > 1)
                return -EINVAL;
        ret = v4l2_subdev_call(vip->decoder, video, s_routing, i, 0, 0);

        if (!ret)
                vip->input = i;

        return 0;
}

/**
 * vidioc_g_input - return input line
 * @file: descriptor of device
 * @priv: unused
 * @i: returned input line number
 *
 * the current active input line is returned
 *
 * return value: always 0.
 */
static int vidioc_g_input(struct file *file, void *priv, unsigned int *i)
{
        struct sta2x11_vip *vip = video_drvdata(file);

        *i = vip->input;
        return 0;
}

/**
 * vidioc_enum_fmt_vid_cap - return video capture format
 * @file: descriptor of device
 * @priv: unused
 * @f: returned format information
 *
 * returns name and format of video capture
 * Only UYVY is supported by hardware.
 *
 * return value: always 0.
 */
static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv,
                                   struct v4l2_fmtdesc *f)
{

        if (f->index != 0)
                return -EINVAL;

        strcpy(f->description, "4:2:2, packed, UYVY");
        f->pixelformat = V4L2_PIX_FMT_UYVY;
        f->flags = 0;
        return 0;
}

/**
 * vidioc_try_fmt_vid_cap - set video capture format
 * @file: descriptor of device
 * @priv: unused
 * @f: new format
 *
 * new video format is set which includes width and
 * field type. width is fixed to 720, no scaling.
 * Only UYVY is supported by this hardware.
 * the minimum height is 200, the maximum is 576 (PAL)
 *
 * return value: 0, no error
 *
 * -EINVAL, pixel or field format not supported
 *
 */
static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
                                  struct v4l2_format *f)
{
        struct sta2x11_vip *vip = video_drvdata(file);
        int interlace_lim;

        if (V4L2_PIX_FMT_UYVY != f->fmt.pix.pixelformat) {
                v4l2_warn(&vip->v4l2_dev, "Invalid format, only UYVY supported\n");
                return -EINVAL;
        }

        if (V4L2_STD_525_60 & vip->std)
                interlace_lim = 240;
        else
                interlace_lim = 288;

        switch (f->fmt.pix.field) {
        default:
        case V4L2_FIELD_ANY:
                if (interlace_lim < f->fmt.pix.height)
                        f->fmt.pix.field = V4L2_FIELD_INTERLACED;
                else
                        f->fmt.pix.field = V4L2_FIELD_BOTTOM;
                break;
        case V4L2_FIELD_TOP:
        case V4L2_FIELD_BOTTOM:
                if (interlace_lim < f->fmt.pix.height)
                        f->fmt.pix.height = interlace_lim;
                break;
        case V4L2_FIELD_INTERLACED:
                break;
        }

        /* It is the only supported format */
        f->fmt.pix.pixelformat = V4L2_PIX_FMT_UYVY;
        f->fmt.pix.height &= ~1;
        if (2 * interlace_lim < f->fmt.pix.height)
                f->fmt.pix.height = 2 * interlace_lim;
        if (200 > f->fmt.pix.height)
                f->fmt.pix.height = 200;
        f->fmt.pix.width = 720;
        f->fmt.pix.bytesperline = f->fmt.pix.width * 2;
        f->fmt.pix.sizeimage = f->fmt.pix.width * 2 * f->fmt.pix.height;
        f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
        return 0;
}

/**
 * vidioc_s_fmt_vid_cap - set current video format parameters
 * @file: descriptor of device
 * @priv: unused
 * @f: returned format information
 *
 * set new capture format
 * return value: 0, no error
 *
 * other, delivered by video DAC routine.
 */
static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
                                struct v4l2_format *f)
{
        struct sta2x11_vip *vip = video_drvdata(file);
        unsigned int t_stop, b_stop, pitch;
        int ret;

        ret = vidioc_try_fmt_vid_cap(file, priv, f);
        if (ret)
                return ret;

        if (vb2_is_busy(&vip->vb_vidq)) {
                /* Can't change format during acquisition */
                v4l2_err(&vip->v4l2_dev, "device busy\n");
                return -EBUSY;
        }
        vip->format = f->fmt.pix;
        switch (vip->format.field) {
        case V4L2_FIELD_INTERLACED:
                t_stop = ((vip->format.height / 2 - 1) << 16) |
                         (2 * vip->format.width - 1);
                b_stop = t_stop;
                pitch = 4 * vip->format.width;
                break;
        case V4L2_FIELD_TOP:
                t_stop = ((vip->format.height - 1) << 16) |
                         (2 * vip->format.width - 1);
                b_stop = (0 << 16) | (2 * vip->format.width - 1);
                pitch = 2 * vip->format.width;
                break;
        case V4L2_FIELD_BOTTOM:
                t_stop = (0 << 16) | (2 * vip->format.width - 1);
                b_stop = (vip->format.height << 16) |
                         (2 * vip->format.width - 1);
                pitch = 2 * vip->format.width;
                break;
        default:
                v4l2_err(&vip->v4l2_dev, "unknown field format\n");
                return -EINVAL;
        }

        spin_lock_irq(&vip->slock);
        /* Y-X Top Field Offset */
        reg_write(vip, DVP_TFO, 0);
        /* Y-X Bottom Field Offset */
        reg_write(vip, DVP_BFO, 0);
        /* Y-X Top Field Stop*/
        reg_write(vip, DVP_TFS, t_stop);
        /* Y-X Bottom Field Stop */
        reg_write(vip, DVP_BFS, b_stop);
        /* Video Memory Pitch */
        reg_write(vip, DVP_VMP, pitch);
        spin_unlock_irq(&vip->slock);

        return 0;
}

/**
 * vidioc_g_fmt_vid_cap - get current video format parameters
 * @file: descriptor of device
 * @priv: unused
 * @f: contains format information
 *
 * returns current video format parameters
 *
 * return value: 0, always successful
 */
static int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
                                struct v4l2_format *f)
{
        struct sta2x11_vip *vip = video_drvdata(file);

        f->fmt.pix = vip->format;

        return 0;
}

static const struct v4l2_ioctl_ops vip_ioctl_ops = {
        .vidioc_querycap = vidioc_querycap,
        /* FMT handling */
        .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap,
        .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap,
        .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap,
        .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap,
        /* Buffer handlers */
        .vidioc_create_bufs = vb2_ioctl_create_bufs,
        .vidioc_prepare_buf = vb2_ioctl_prepare_buf,
        .vidioc_reqbufs = vb2_ioctl_reqbufs,
        .vidioc_querybuf = vb2_ioctl_querybuf,
        .vidioc_qbuf = vb2_ioctl_qbuf,
        .vidioc_dqbuf = vb2_ioctl_dqbuf,
        /* Stream on/off */
        .vidioc_streamon = vb2_ioctl_streamon,
        .vidioc_streamoff = vb2_ioctl_streamoff,
        /* Standard handling */
        .vidioc_g_std = vidioc_g_std,
        .vidioc_s_std = vidioc_s_std,
        .vidioc_querystd = vidioc_querystd,
        /* Input handling */
        .vidioc_enum_input = vidioc_enum_input,
        .vidioc_g_input = vidioc_g_input,
        .vidioc_s_input = vidioc_s_input,
        /* Log status ioctl */
        .vidioc_log_status = v4l2_ctrl_log_status,
        /* Event handling */
        .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
        .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
};

static const struct video_device video_dev_template = {
        .name = KBUILD_MODNAME,
        .release = video_device_release_empty,
        .fops = &vip_fops,
        .ioctl_ops = &vip_ioctl_ops,
        .tvnorms = V4L2_STD_ALL,
};

/**
 * vip_irq - interrupt routine
 * @irq: Number of interrupt ( not used, correct number is assumed )
 * @vip: local data structure containing all information
 *
 * check for both frame interrupts set ( top and bottom ).
 * check FIFO overflow, but limit number of log messages after open.
 * signal a complete buffer if done
 *
 * return value: IRQ_NONE, interrupt was not generated by VIP
 *
 * IRQ_HANDLED, interrupt done.
 */
static irqreturn_t vip_irq(int irq, struct sta2x11_vip *vip)
{
        unsigned int status;

        status = reg_read(vip, DVP_ITS);

        if (!status)            /* No interrupt to handle */
                return IRQ_NONE;

        if (status & DVP_IT_FIFO)
                if (vip->overflow++ > 5)
                        pr_info("VIP: fifo overflow\n");

        if ((status & DVP_IT_VST) && (status & DVP_IT_VSB)) {
                /* this is bad, we are too slow, hope the condition is gone
                 * on the next frame */
                return IRQ_HANDLED;
        }

        if (status & DVP_IT_VST)
                if ((++vip->tcount) < 2)
                        return IRQ_HANDLED;
        if (status & DVP_IT_VSB) {
                vip->bcount++;
                return IRQ_HANDLED;
        }

        if (vip->active) { /* Acquisition is over on this buffer */
                /* Disable acquisition */
                reg_write(vip, DVP_CTL, reg_read(vip, DVP_CTL) & ~DVP_CTL_ENA);
                /* Remove the active buffer from the list */
                vip->active->vb.vb2_buf.timestamp = ktime_get_ns();
                vip->active->vb.sequence = vip->sequence++;
                vb2_buffer_done(&vip->active->vb.vb2_buf, VB2_BUF_STATE_DONE);
        }

        return IRQ_HANDLED;
}

static void sta2x11_vip_init_register(struct sta2x11_vip *vip)
{
        /* Register initialization */
        spin_lock_irq(&vip->slock);
        /* Clean interrupt */
        reg_read(vip, DVP_ITS);
        /* Enable Half Line per vertical */
        reg_write(vip, DVP_HLFLN, DVP_HLFLN_SD);
        /* Reset VIP control */
        reg_write(vip, DVP_CTL, DVP_CTL_RST);
        /* Clear VIP control */
        reg_write(vip, DVP_CTL, 0);
        spin_unlock_irq(&vip->slock);
}
static void sta2x11_vip_clear_register(struct sta2x11_vip *vip)
{
        spin_lock_irq(&vip->slock);
        /* Disable interrupt */
        reg_write(vip, DVP_ITM, 0);
        /* Reset VIP Control */
        reg_write(vip, DVP_CTL, DVP_CTL_RST);
        /* Clear VIP Control */
        reg_write(vip, DVP_CTL, 0);
        /* Clean VIP Interrupt */
        reg_read(vip, DVP_ITS);
        spin_unlock_irq(&vip->slock);
}
static int sta2x11_vip_init_buffer(struct sta2x11_vip *vip)
{
        int err;

        err = dma_set_coherent_mask(&vip->pdev->dev, DMA_BIT_MASK(29));
        if (err) {
                v4l2_err(&vip->v4l2_dev, "Cannot configure coherent mask");
                return err;
        }
        memset(&vip->vb_vidq, 0, sizeof(struct vb2_queue));
        vip->vb_vidq.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
        vip->vb_vidq.io_modes = VB2_MMAP | VB2_READ;
        vip->vb_vidq.drv_priv = vip;
        vip->vb_vidq.buf_struct_size = sizeof(struct vip_buffer);
        vip->vb_vidq.ops = &vip_video_qops;
        vip->vb_vidq.mem_ops = &vb2_dma_contig_memops;
        vip->vb_vidq.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
        vip->vb_vidq.dev = &vip->pdev->dev;
        vip->vb_vidq.lock = &vip->v4l_lock;
        err = vb2_queue_init(&vip->vb_vidq);
        if (err)
                return err;
        INIT_LIST_HEAD(&vip->buffer_list);
        spin_lock_init(&vip->lock);
        return 0;
}

static int sta2x11_vip_init_controls(struct sta2x11_vip *vip)
{
        /*
         * Inititialize an empty control so VIP can inerithing controls
         * from ADV7180
         */
        v4l2_ctrl_handler_init(&vip->ctrl_hdl, 0);

        vip->v4l2_dev.ctrl_handler = &vip->ctrl_hdl;
        if (vip->ctrl_hdl.error) {
                int err = vip->ctrl_hdl.error;

                v4l2_ctrl_handler_free(&vip->ctrl_hdl);
                return err;
        }

        return 0;
}

/**
 * vip_gpio_reserve - reserve gpio pin
 * @dev: device
 * @pin: GPIO pin number
 * @dir: direction, input or output
 * @name: GPIO pin name
 *
 */
static int vip_gpio_reserve(struct device *dev, int pin, int dir,
                            const char *name)
{
        int ret = -ENODEV;

        if (!gpio_is_valid(pin))
                return ret;

        ret = gpio_request(pin, name);
        if (ret) {
                dev_err(dev, "Failed to allocate pin %d (%s)\n", pin, name);
                return ret;
        }

        ret = gpio_direction_output(pin, dir);
        if (ret) {
                dev_err(dev, "Failed to set direction for pin %d (%s)\n",
                        pin, name);
                gpio_free(pin);
                return ret;
        }

        ret = gpio_export(pin, false);
        if (ret) {
                dev_err(dev, "Failed to export pin %d (%s)\n", pin, name);
                gpio_free(pin);
                return ret;
        }

        return 0;
}

/**
 * vip_gpio_release - release gpio pin
 * @dev: device
 * @pin: GPIO pin number
 * @name: GPIO pin name
 *
 */
static void vip_gpio_release(struct device *dev, int pin, const char *name)
{
        if (gpio_is_valid(pin)) {
                dev_dbg(dev, "releasing pin %d (%s)\n", pin, name);
                gpio_unexport(pin);
                gpio_free(pin);
        }
}

/**
 * sta2x11_vip_init_one - init one instance of video device
 * @pdev: PCI device
 * @ent: (not used)
 *
 * allocate reset pins for DAC.
 * Reset video DAC, this is done via reset line.
 * allocate memory for managing device
 * request interrupt
 * map IO region
 * register device
 * find and initialize video DAC
 *
 * return value: 0, no error
 *
 * -ENOMEM, no memory
 *
 * -ENODEV, device could not be detected or registered
 */
static int sta2x11_vip_init_one(struct pci_dev *pdev,
                                const struct pci_device_id *ent)
{
        int ret;
        struct sta2x11_vip *vip;
        struct vip_config *config;

        /* Check if hardware support 26-bit DMA */
        if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(26))) {
                dev_err(&pdev->dev, "26-bit DMA addressing not available\n");
                return -EINVAL;
        }
        /* Enable PCI */
        ret = pci_enable_device(pdev);
        if (ret)
                return ret;

        /* Get VIP platform data */
        config = dev_get_platdata(&pdev->dev);
        if (!config) {
                dev_info(&pdev->dev, "VIP slot disabled\n");
                ret = -EINVAL;
                goto disable;
        }

        /* Power configuration */
        ret = vip_gpio_reserve(&pdev->dev, config->pwr_pin, 0,
                               config->pwr_name);
        if (ret)
                goto disable;

        ret = vip_gpio_reserve(&pdev->dev, config->reset_pin, 0,
                               config->reset_name);
        if (ret) {
                vip_gpio_release(&pdev->dev, config->pwr_pin,
                                 config->pwr_name);
                goto disable;
        }

        if (gpio_is_valid(config->pwr_pin)) {
                /* Datasheet says 5ms between PWR and RST */
                usleep_range(5000, 25000);
                gpio_direction_output(config->pwr_pin, 1);
        }

        if (gpio_is_valid(config->reset_pin)) {
                /* Datasheet says 5ms between PWR and RST */
                usleep_range(5000, 25000);
                gpio_direction_output(config->reset_pin, 1);
        }
        usleep_range(5000, 25000);

        /* Allocate a new VIP instance */
        vip = kzalloc(sizeof(struct sta2x11_vip), GFP_KERNEL);
        if (!vip) {
                ret = -ENOMEM;
                goto release_gpios;
        }
        vip->pdev = pdev;
        vip->std = V4L2_STD_PAL;
        vip->format = formats_50[0];
        vip->config = config;
        mutex_init(&vip->v4l_lock);

        ret = sta2x11_vip_init_controls(vip);
        if (ret)
                goto free_mem;
        ret = v4l2_device_register(&pdev->dev, &vip->v4l2_dev);
        if (ret)
                goto free_mem;

        dev_dbg(&pdev->dev, "BAR #0 at 0x%lx 0x%lx irq %d\n",
                (unsigned long)pci_resource_start(pdev, 0),
                (unsigned long)pci_resource_len(pdev, 0), pdev->irq);

        pci_set_master(pdev);

        ret = pci_request_regions(pdev, KBUILD_MODNAME);
        if (ret)
                goto unreg;

        vip->iomem = pci_iomap(pdev, 0, 0x100);
        if (!vip->iomem) {
                ret = -ENOMEM;
                goto release;
        }

        pci_enable_msi(pdev);

        /* Initialize buffer */
        ret = sta2x11_vip_init_buffer(vip);
        if (ret)
                goto unmap;

        spin_lock_init(&vip->slock);

        ret = request_irq(pdev->irq,
                          (irq_handler_t) vip_irq,
                          IRQF_SHARED, KBUILD_MODNAME, vip);
        if (ret) {
                dev_err(&pdev->dev, "request_irq failed\n");
                ret = -ENODEV;
                goto release_buf;
        }

        /* Initialize and register video device */
        vip->video_dev = video_dev_template;
        vip->video_dev.v4l2_dev = &vip->v4l2_dev;
        vip->video_dev.queue = &vip->vb_vidq;
        vip->video_dev.lock = &vip->v4l_lock;
        video_set_drvdata(&vip->video_dev, vip);

        ret = video_register_device(&vip->video_dev, VFL_TYPE_GRABBER, -1);
        if (ret)
                goto vrelease;

        /* Get ADV7180 subdevice */
        vip->adapter = i2c_get_adapter(vip->config->i2c_id);
        if (!vip->adapter) {
                ret = -ENODEV;
                dev_err(&pdev->dev, "no I2C adapter found\n");
                goto vunreg;
        }

        vip->decoder = v4l2_i2c_new_subdev(&vip->v4l2_dev, vip->adapter,
                                           "adv7180", vip->config->i2c_addr,
                                           NULL);
        if (!vip->decoder) {
                ret = -ENODEV;
                dev_err(&pdev->dev, "no decoder found\n");
                goto vunreg;
        }

        i2c_put_adapter(vip->adapter);
        v4l2_subdev_call(vip->decoder, core, init, 0);

        sta2x11_vip_init_register(vip);

        dev_info(&pdev->dev, "STA2X11 Video Input Port (VIP) loaded\n");
        return 0;

vunreg:
        video_set_drvdata(&vip->video_dev, NULL);
vrelease:
        video_unregister_device(&vip->video_dev);
        free_irq(pdev->irq, vip);
release_buf:
        pci_disable_msi(pdev);
unmap:
        vb2_queue_release(&vip->vb_vidq);
        pci_iounmap(pdev, vip->iomem);
release:
        pci_release_regions(pdev);
unreg:
        v4l2_device_unregister(&vip->v4l2_dev);
free_mem:
        kfree(vip);
release_gpios:
        vip_gpio_release(&pdev->dev, config->reset_pin, config->reset_name);
        vip_gpio_release(&pdev->dev, config->pwr_pin, config->pwr_name);
disable:
        /*
         * do not call pci_disable_device on sta2x11 because it break all
         * other Bus masters on this EP
         */
        return ret;
}

/**
 * sta2x11_vip_remove_one - release device
 * @pdev: PCI device
 *
 * Undo everything done in .._init_one
 *
 * unregister video device
 * free interrupt
 * unmap ioadresses
 * free memory
 * free GPIO pins
 */
static void sta2x11_vip_remove_one(struct pci_dev *pdev)
{
        struct v4l2_device *v4l2_dev = pci_get_drvdata(pdev);
        struct sta2x11_vip *vip =
            container_of(v4l2_dev, struct sta2x11_vip, v4l2_dev);

        sta2x11_vip_clear_register(vip);

        video_set_drvdata(&vip->video_dev, NULL);
        video_unregister_device(&vip->video_dev);
        free_irq(pdev->irq, vip);
        pci_disable_msi(pdev);
        vb2_queue_release(&vip->vb_vidq);
        pci_iounmap(pdev, vip->iomem);
        pci_release_regions(pdev);

        v4l2_device_unregister(&vip->v4l2_dev);

        vip_gpio_release(&pdev->dev, vip->config->pwr_pin,
                         vip->config->pwr_name);
        vip_gpio_release(&pdev->dev, vip->config->reset_pin,
                         vip->config->reset_name);

        kfree(vip);
        /*
         * do not call pci_disable_device on sta2x11 because it break all
         * other Bus masters on this EP
         */
}

#ifdef CONFIG_PM

/**
 * sta2x11_vip_suspend - set device into power save mode
 * @pdev: PCI device
 * @state: new state of device
 *
 * all relevant registers are saved and an attempt to set a new state is made.
 *
 * return value: 0 always indicate success,
 * even if device could not be disabled. (workaround for hardware problem)
 */
static int sta2x11_vip_suspend(struct pci_dev *pdev, pm_message_t state)
{
        struct v4l2_device *v4l2_dev = pci_get_drvdata(pdev);
        struct sta2x11_vip *vip =
            container_of(v4l2_dev, struct sta2x11_vip, v4l2_dev);
        unsigned long flags;
        int i;

        spin_lock_irqsave(&vip->slock, flags);
        vip->register_save_area[0] = reg_read(vip, DVP_CTL);
        reg_write(vip, DVP_CTL, vip->register_save_area[0] & DVP_CTL_DIS);
        vip->register_save_area[SAVE_COUNT] = reg_read(vip, DVP_ITM);
        reg_write(vip, DVP_ITM, 0);
        for (i = 1; i < SAVE_COUNT; i++)
                vip->register_save_area[i] = reg_read(vip, 4 * i);
        for (i = 0; i < AUX_COUNT; i++)
                vip->register_save_area[SAVE_COUNT + IRQ_COUNT + i] =
                    reg_read(vip, registers_to_save[i]);
        spin_unlock_irqrestore(&vip->slock, flags);
        /* save pci state */
        pci_save_state(pdev);
        if (pci_set_power_state(pdev, pci_choose_state(pdev, state))) {
                /*
                 * do not call pci_disable_device on sta2x11 because it
                 * break all other Bus masters on this EP
                 */
                vip->disabled = 1;
        }

        pr_info("VIP: suspend\n");
        return 0;
}

/**
 * sta2x11_vip_resume - resume device operation
 * @pdev : PCI device
 *
 * re-enable device, set PCI state to powered and restore registers.
 * resume normal device operation afterwards.
 *
 * return value: 0, no error.
 *
 * other, could not set device to power on state.
 */
static int sta2x11_vip_resume(struct pci_dev *pdev)
{
        struct v4l2_device *v4l2_dev = pci_get_drvdata(pdev);
        struct sta2x11_vip *vip =
            container_of(v4l2_dev, struct sta2x11_vip, v4l2_dev);
        unsigned long flags;
        int ret, i;

        pr_info("VIP: resume\n");
        /* restore pci state */
        if (vip->disabled) {
                ret = pci_enable_device(pdev);
                if (ret) {
                        pr_warn("VIP: Can't enable device.\n");
                        return ret;
                }
                vip->disabled = 0;
        }
        ret = pci_set_power_state(pdev, PCI_D0);
        if (ret) {
                /*
                 * do not call pci_disable_device on sta2x11 because it
                 * break all other Bus masters on this EP
                 */
                pr_warn("VIP: Can't enable device.\n");
                vip->disabled = 1;
                return ret;
        }

        pci_restore_state(pdev);

        spin_lock_irqsave(&vip->slock, flags);
        for (i = 1; i < SAVE_COUNT; i++)
                reg_write(vip, 4 * i, vip->register_save_area[i]);
        for (i = 0; i < AUX_COUNT; i++)
                reg_write(vip, registers_to_save[i],
                          vip->register_save_area[SAVE_COUNT + IRQ_COUNT + i]);
        reg_write(vip, DVP_CTL, vip->register_save_area[0]);
        reg_write(vip, DVP_ITM, vip->register_save_area[SAVE_COUNT]);
        spin_unlock_irqrestore(&vip->slock, flags);
        return 0;
}

#endif

static const struct pci_device_id sta2x11_vip_pci_tbl[] = {
        {PCI_DEVICE(PCI_VENDOR_ID_STMICRO, PCI_DEVICE_ID_STMICRO_VIP)},
        {0,}
};

static struct pci_driver sta2x11_vip_driver = {
        .name = KBUILD_MODNAME,
        .probe = sta2x11_vip_init_one,
        .remove = sta2x11_vip_remove_one,
        .id_table = sta2x11_vip_pci_tbl,
#ifdef CONFIG_PM
        .suspend = sta2x11_vip_suspend,
        .resume = sta2x11_vip_resume,
#endif
};

static int __init sta2x11_vip_init_module(void)
{
        return pci_register_driver(&sta2x11_vip_driver);
}

static void __exit sta2x11_vip_exit_module(void)
{
        pci_unregister_driver(&sta2x11_vip_driver);
}

#ifdef MODULE
module_init(sta2x11_vip_init_module);
module_exit(sta2x11_vip_exit_module);
#else
late_initcall_sync(sta2x11_vip_init_module);
#endif

MODULE_DESCRIPTION("STA2X11 Video Input Port driver");
MODULE_AUTHOR("Wind River");
MODULE_LICENSE("GPL v2");
MODULE_SUPPORTED_DEVICE("sta2x11 video input");
MODULE_VERSION(DRV_VERSION);
MODULE_DEVICE_TABLE(pci, sta2x11_vip_pci_tbl);