Linux 4.19.133
[linux/fpc-iii.git] / drivers / mfd / da9052-core.c
blob433add43a0a94219826e039508951531aa266a29
1 /*
2 * Device access for Dialog DA9052 PMICs.
4 * Copyright(c) 2011 Dialog Semiconductor Ltd.
6 * Author: David Dajun Chen <dchen@diasemi.com>
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2 of the License, or (at your
11 * option) any later version.
14 #include <linux/device.h>
15 #include <linux/delay.h>
16 #include <linux/input.h>
17 #include <linux/interrupt.h>
18 #include <linux/mfd/core.h>
19 #include <linux/slab.h>
20 #include <linux/module.h>
21 #include <linux/property.h>
23 #include <linux/mfd/da9052/da9052.h>
24 #include <linux/mfd/da9052/pdata.h>
25 #include <linux/mfd/da9052/reg.h>
27 static bool da9052_reg_readable(struct device *dev, unsigned int reg)
29 switch (reg) {
30 case DA9052_PAGE0_CON_REG:
31 case DA9052_STATUS_A_REG:
32 case DA9052_STATUS_B_REG:
33 case DA9052_STATUS_C_REG:
34 case DA9052_STATUS_D_REG:
35 case DA9052_EVENT_A_REG:
36 case DA9052_EVENT_B_REG:
37 case DA9052_EVENT_C_REG:
38 case DA9052_EVENT_D_REG:
39 case DA9052_FAULTLOG_REG:
40 case DA9052_IRQ_MASK_A_REG:
41 case DA9052_IRQ_MASK_B_REG:
42 case DA9052_IRQ_MASK_C_REG:
43 case DA9052_IRQ_MASK_D_REG:
44 case DA9052_CONTROL_A_REG:
45 case DA9052_CONTROL_B_REG:
46 case DA9052_CONTROL_C_REG:
47 case DA9052_CONTROL_D_REG:
48 case DA9052_PDDIS_REG:
49 case DA9052_INTERFACE_REG:
50 case DA9052_RESET_REG:
51 case DA9052_GPIO_0_1_REG:
52 case DA9052_GPIO_2_3_REG:
53 case DA9052_GPIO_4_5_REG:
54 case DA9052_GPIO_6_7_REG:
55 case DA9052_GPIO_8_9_REG:
56 case DA9052_GPIO_10_11_REG:
57 case DA9052_GPIO_12_13_REG:
58 case DA9052_GPIO_14_15_REG:
59 case DA9052_ID_0_1_REG:
60 case DA9052_ID_2_3_REG:
61 case DA9052_ID_4_5_REG:
62 case DA9052_ID_6_7_REG:
63 case DA9052_ID_8_9_REG:
64 case DA9052_ID_10_11_REG:
65 case DA9052_ID_12_13_REG:
66 case DA9052_ID_14_15_REG:
67 case DA9052_ID_16_17_REG:
68 case DA9052_ID_18_19_REG:
69 case DA9052_ID_20_21_REG:
70 case DA9052_SEQ_STATUS_REG:
71 case DA9052_SEQ_A_REG:
72 case DA9052_SEQ_B_REG:
73 case DA9052_SEQ_TIMER_REG:
74 case DA9052_BUCKA_REG:
75 case DA9052_BUCKB_REG:
76 case DA9052_BUCKCORE_REG:
77 case DA9052_BUCKPRO_REG:
78 case DA9052_BUCKMEM_REG:
79 case DA9052_BUCKPERI_REG:
80 case DA9052_LDO1_REG:
81 case DA9052_LDO2_REG:
82 case DA9052_LDO3_REG:
83 case DA9052_LDO4_REG:
84 case DA9052_LDO5_REG:
85 case DA9052_LDO6_REG:
86 case DA9052_LDO7_REG:
87 case DA9052_LDO8_REG:
88 case DA9052_LDO9_REG:
89 case DA9052_LDO10_REG:
90 case DA9052_SUPPLY_REG:
91 case DA9052_PULLDOWN_REG:
92 case DA9052_CHGBUCK_REG:
93 case DA9052_WAITCONT_REG:
94 case DA9052_ISET_REG:
95 case DA9052_BATCHG_REG:
96 case DA9052_CHG_CONT_REG:
97 case DA9052_INPUT_CONT_REG:
98 case DA9052_CHG_TIME_REG:
99 case DA9052_BBAT_CONT_REG:
100 case DA9052_BOOST_REG:
101 case DA9052_LED_CONT_REG:
102 case DA9052_LEDMIN123_REG:
103 case DA9052_LED1_CONF_REG:
104 case DA9052_LED2_CONF_REG:
105 case DA9052_LED3_CONF_REG:
106 case DA9052_LED1CONT_REG:
107 case DA9052_LED2CONT_REG:
108 case DA9052_LED3CONT_REG:
109 case DA9052_LED_CONT_4_REG:
110 case DA9052_LED_CONT_5_REG:
111 case DA9052_ADC_MAN_REG:
112 case DA9052_ADC_CONT_REG:
113 case DA9052_ADC_RES_L_REG:
114 case DA9052_ADC_RES_H_REG:
115 case DA9052_VDD_RES_REG:
116 case DA9052_VDD_MON_REG:
117 case DA9052_ICHG_AV_REG:
118 case DA9052_ICHG_THD_REG:
119 case DA9052_ICHG_END_REG:
120 case DA9052_TBAT_RES_REG:
121 case DA9052_TBAT_HIGHP_REG:
122 case DA9052_TBAT_HIGHN_REG:
123 case DA9052_TBAT_LOW_REG:
124 case DA9052_T_OFFSET_REG:
125 case DA9052_ADCIN4_RES_REG:
126 case DA9052_AUTO4_HIGH_REG:
127 case DA9052_AUTO4_LOW_REG:
128 case DA9052_ADCIN5_RES_REG:
129 case DA9052_AUTO5_HIGH_REG:
130 case DA9052_AUTO5_LOW_REG:
131 case DA9052_ADCIN6_RES_REG:
132 case DA9052_AUTO6_HIGH_REG:
133 case DA9052_AUTO6_LOW_REG:
134 case DA9052_TJUNC_RES_REG:
135 case DA9052_TSI_CONT_A_REG:
136 case DA9052_TSI_CONT_B_REG:
137 case DA9052_TSI_X_MSB_REG:
138 case DA9052_TSI_Y_MSB_REG:
139 case DA9052_TSI_LSB_REG:
140 case DA9052_TSI_Z_MSB_REG:
141 case DA9052_COUNT_S_REG:
142 case DA9052_COUNT_MI_REG:
143 case DA9052_COUNT_H_REG:
144 case DA9052_COUNT_D_REG:
145 case DA9052_COUNT_MO_REG:
146 case DA9052_COUNT_Y_REG:
147 case DA9052_ALARM_MI_REG:
148 case DA9052_ALARM_H_REG:
149 case DA9052_ALARM_D_REG:
150 case DA9052_ALARM_MO_REG:
151 case DA9052_ALARM_Y_REG:
152 case DA9052_SECOND_A_REG:
153 case DA9052_SECOND_B_REG:
154 case DA9052_SECOND_C_REG:
155 case DA9052_SECOND_D_REG:
156 case DA9052_PAGE1_CON_REG:
157 return true;
158 default:
159 return false;
163 static bool da9052_reg_writeable(struct device *dev, unsigned int reg)
165 switch (reg) {
166 case DA9052_PAGE0_CON_REG:
167 case DA9052_EVENT_A_REG:
168 case DA9052_EVENT_B_REG:
169 case DA9052_EVENT_C_REG:
170 case DA9052_EVENT_D_REG:
171 case DA9052_FAULTLOG_REG:
172 case DA9052_IRQ_MASK_A_REG:
173 case DA9052_IRQ_MASK_B_REG:
174 case DA9052_IRQ_MASK_C_REG:
175 case DA9052_IRQ_MASK_D_REG:
176 case DA9052_CONTROL_A_REG:
177 case DA9052_CONTROL_B_REG:
178 case DA9052_CONTROL_C_REG:
179 case DA9052_CONTROL_D_REG:
180 case DA9052_PDDIS_REG:
181 case DA9052_RESET_REG:
182 case DA9052_GPIO_0_1_REG:
183 case DA9052_GPIO_2_3_REG:
184 case DA9052_GPIO_4_5_REG:
185 case DA9052_GPIO_6_7_REG:
186 case DA9052_GPIO_8_9_REG:
187 case DA9052_GPIO_10_11_REG:
188 case DA9052_GPIO_12_13_REG:
189 case DA9052_GPIO_14_15_REG:
190 case DA9052_ID_0_1_REG:
191 case DA9052_ID_2_3_REG:
192 case DA9052_ID_4_5_REG:
193 case DA9052_ID_6_7_REG:
194 case DA9052_ID_8_9_REG:
195 case DA9052_ID_10_11_REG:
196 case DA9052_ID_12_13_REG:
197 case DA9052_ID_14_15_REG:
198 case DA9052_ID_16_17_REG:
199 case DA9052_ID_18_19_REG:
200 case DA9052_ID_20_21_REG:
201 case DA9052_SEQ_STATUS_REG:
202 case DA9052_SEQ_A_REG:
203 case DA9052_SEQ_B_REG:
204 case DA9052_SEQ_TIMER_REG:
205 case DA9052_BUCKA_REG:
206 case DA9052_BUCKB_REG:
207 case DA9052_BUCKCORE_REG:
208 case DA9052_BUCKPRO_REG:
209 case DA9052_BUCKMEM_REG:
210 case DA9052_BUCKPERI_REG:
211 case DA9052_LDO1_REG:
212 case DA9052_LDO2_REG:
213 case DA9052_LDO3_REG:
214 case DA9052_LDO4_REG:
215 case DA9052_LDO5_REG:
216 case DA9052_LDO6_REG:
217 case DA9052_LDO7_REG:
218 case DA9052_LDO8_REG:
219 case DA9052_LDO9_REG:
220 case DA9052_LDO10_REG:
221 case DA9052_SUPPLY_REG:
222 case DA9052_PULLDOWN_REG:
223 case DA9052_CHGBUCK_REG:
224 case DA9052_WAITCONT_REG:
225 case DA9052_ISET_REG:
226 case DA9052_BATCHG_REG:
227 case DA9052_CHG_CONT_REG:
228 case DA9052_INPUT_CONT_REG:
229 case DA9052_BBAT_CONT_REG:
230 case DA9052_BOOST_REG:
231 case DA9052_LED_CONT_REG:
232 case DA9052_LEDMIN123_REG:
233 case DA9052_LED1_CONF_REG:
234 case DA9052_LED2_CONF_REG:
235 case DA9052_LED3_CONF_REG:
236 case DA9052_LED1CONT_REG:
237 case DA9052_LED2CONT_REG:
238 case DA9052_LED3CONT_REG:
239 case DA9052_LED_CONT_4_REG:
240 case DA9052_LED_CONT_5_REG:
241 case DA9052_ADC_MAN_REG:
242 case DA9052_ADC_CONT_REG:
243 case DA9052_ADC_RES_L_REG:
244 case DA9052_ADC_RES_H_REG:
245 case DA9052_VDD_RES_REG:
246 case DA9052_VDD_MON_REG:
247 case DA9052_ICHG_THD_REG:
248 case DA9052_ICHG_END_REG:
249 case DA9052_TBAT_HIGHP_REG:
250 case DA9052_TBAT_HIGHN_REG:
251 case DA9052_TBAT_LOW_REG:
252 case DA9052_T_OFFSET_REG:
253 case DA9052_AUTO4_HIGH_REG:
254 case DA9052_AUTO4_LOW_REG:
255 case DA9052_AUTO5_HIGH_REG:
256 case DA9052_AUTO5_LOW_REG:
257 case DA9052_AUTO6_HIGH_REG:
258 case DA9052_AUTO6_LOW_REG:
259 case DA9052_TSI_CONT_A_REG:
260 case DA9052_TSI_CONT_B_REG:
261 case DA9052_COUNT_S_REG:
262 case DA9052_COUNT_MI_REG:
263 case DA9052_COUNT_H_REG:
264 case DA9052_COUNT_D_REG:
265 case DA9052_COUNT_MO_REG:
266 case DA9052_COUNT_Y_REG:
267 case DA9052_ALARM_MI_REG:
268 case DA9052_ALARM_H_REG:
269 case DA9052_ALARM_D_REG:
270 case DA9052_ALARM_MO_REG:
271 case DA9052_ALARM_Y_REG:
272 case DA9052_PAGE1_CON_REG:
273 return true;
274 default:
275 return false;
279 static bool da9052_reg_volatile(struct device *dev, unsigned int reg)
281 switch (reg) {
282 case DA9052_STATUS_A_REG:
283 case DA9052_STATUS_B_REG:
284 case DA9052_STATUS_C_REG:
285 case DA9052_STATUS_D_REG:
286 case DA9052_EVENT_A_REG:
287 case DA9052_EVENT_B_REG:
288 case DA9052_EVENT_C_REG:
289 case DA9052_EVENT_D_REG:
290 case DA9052_CONTROL_B_REG:
291 case DA9052_CONTROL_D_REG:
292 case DA9052_SUPPLY_REG:
293 case DA9052_FAULTLOG_REG:
294 case DA9052_CHG_TIME_REG:
295 case DA9052_ADC_RES_L_REG:
296 case DA9052_ADC_RES_H_REG:
297 case DA9052_VDD_RES_REG:
298 case DA9052_ICHG_AV_REG:
299 case DA9052_TBAT_RES_REG:
300 case DA9052_ADCIN4_RES_REG:
301 case DA9052_ADCIN5_RES_REG:
302 case DA9052_ADCIN6_RES_REG:
303 case DA9052_TJUNC_RES_REG:
304 case DA9052_TSI_X_MSB_REG:
305 case DA9052_TSI_Y_MSB_REG:
306 case DA9052_TSI_LSB_REG:
307 case DA9052_TSI_Z_MSB_REG:
308 case DA9052_COUNT_S_REG:
309 case DA9052_COUNT_MI_REG:
310 case DA9052_COUNT_H_REG:
311 case DA9052_COUNT_D_REG:
312 case DA9052_COUNT_MO_REG:
313 case DA9052_COUNT_Y_REG:
314 case DA9052_ALARM_MI_REG:
315 return true;
316 default:
317 return false;
322 * TBAT look-up table is computed from the R90 reg (8 bit register)
323 * reading as below. The battery temperature is in milliCentigrade
324 * TBAT = (1/(t1+1/298) - 273) * 1000 mC
325 * where t1 = (1/B)* ln(( ADCval * 2.5)/(R25*ITBAT*255))
326 * Default values are R25 = 10e3, B = 3380, ITBAT = 50e-6
327 * Example:
328 * R25=10E3, B=3380, ITBAT=50e-6, ADCVAL=62d calculates
329 * TBAT = 20015 mili degrees Centrigrade
332 static const int32_t tbat_lookup[255] = {
333 183258, 144221, 124334, 111336, 101826, 94397, 88343, 83257,
334 78889, 75071, 71688, 68656, 65914, 63414, 61120, 59001,
335 570366, 55204, 53490, 51881, 50364, 48931, 47574, 46285,
336 45059, 43889, 42772, 41703, 40678, 39694, 38748, 37838,
337 36961, 36115, 35297, 34507, 33743, 33002, 32284, 31588,
338 30911, 30254, 29615, 28994, 28389, 27799, 27225, 26664,
339 26117, 25584, 25062, 24553, 24054, 23567, 23091, 22624,
340 22167, 21719, 21281, 20851, 20429, 20015, 19610, 19211,
341 18820, 18436, 18058, 17688, 17323, 16965, 16612, 16266,
342 15925, 15589, 15259, 14933, 14613, 14298, 13987, 13681,
343 13379, 13082, 12788, 12499, 12214, 11933, 11655, 11382,
344 11112, 10845, 10582, 10322, 10066, 9812, 9562, 9315,
345 9071, 8830, 8591, 8356, 8123, 7893, 7665, 7440,
346 7218, 6998, 6780, 6565, 6352, 6141, 5933, 5726,
347 5522, 5320, 5120, 4922, 4726, 4532, 4340, 4149,
348 3961, 3774, 3589, 3406, 3225, 3045, 2867, 2690,
349 2516, 2342, 2170, 2000, 1831, 1664, 1498, 1334,
350 1171, 1009, 849, 690, 532, 376, 221, 67,
351 -84, -236, -386, -535, -683, -830, -975, -1119,
352 -1263, -1405, -1546, -1686, -1825, -1964, -2101, -2237,
353 -2372, -2506, -2639, -2771, -2902, -3033, -3162, -3291,
354 -3418, -3545, -3671, -3796, -3920, -4044, -4166, -4288,
355 -4409, -4529, -4649, -4767, -4885, -5002, -5119, -5235,
356 -5349, -5464, -5577, -5690, -5802, -5913, -6024, -6134,
357 -6244, -6352, -6461, -6568, -6675, -6781, -6887, -6992,
358 -7096, -7200, -7303, -7406, -7508, -7609, -7710, -7810,
359 -7910, -8009, -8108, -8206, -8304, -8401, -8497, -8593,
360 -8689, -8784, -8878, -8972, -9066, -9159, -9251, -9343,
361 -9435, -9526, -9617, -9707, -9796, -9886, -9975, -10063,
362 -10151, -10238, -10325, -10412, -10839, -10923, -11007, -11090,
363 -11173, -11256, -11338, -11420, -11501, -11583, -11663, -11744,
364 -11823, -11903, -11982
367 static const u8 chan_mux[DA9052_ADC_VBBAT + 1] = {
368 [DA9052_ADC_VDDOUT] = DA9052_ADC_MAN_MUXSEL_VDDOUT,
369 [DA9052_ADC_ICH] = DA9052_ADC_MAN_MUXSEL_ICH,
370 [DA9052_ADC_TBAT] = DA9052_ADC_MAN_MUXSEL_TBAT,
371 [DA9052_ADC_VBAT] = DA9052_ADC_MAN_MUXSEL_VBAT,
372 [DA9052_ADC_IN4] = DA9052_ADC_MAN_MUXSEL_AD4,
373 [DA9052_ADC_IN5] = DA9052_ADC_MAN_MUXSEL_AD5,
374 [DA9052_ADC_IN6] = DA9052_ADC_MAN_MUXSEL_AD6,
375 [DA9052_ADC_VBBAT] = DA9052_ADC_MAN_MUXSEL_VBBAT
378 int da9052_adc_manual_read(struct da9052 *da9052, unsigned char channel)
380 int ret;
381 unsigned short calc_data;
382 unsigned short data;
383 unsigned char mux_sel;
385 if (channel > DA9052_ADC_VBBAT)
386 return -EINVAL;
388 mutex_lock(&da9052->auxadc_lock);
390 reinit_completion(&da9052->done);
392 /* Channel gets activated on enabling the Conversion bit */
393 mux_sel = chan_mux[channel] | DA9052_ADC_MAN_MAN_CONV;
395 ret = da9052_reg_write(da9052, DA9052_ADC_MAN_REG, mux_sel);
396 if (ret < 0)
397 goto err;
399 /* Wait for an interrupt */
400 if (!wait_for_completion_timeout(&da9052->done,
401 msecs_to_jiffies(500))) {
402 dev_err(da9052->dev,
403 "timeout waiting for ADC conversion interrupt\n");
404 ret = -ETIMEDOUT;
405 goto err;
408 ret = da9052_reg_read(da9052, DA9052_ADC_RES_H_REG);
409 if (ret < 0)
410 goto err;
412 calc_data = (unsigned short)ret;
413 data = calc_data << 2;
415 ret = da9052_reg_read(da9052, DA9052_ADC_RES_L_REG);
416 if (ret < 0)
417 goto err;
419 calc_data = (unsigned short)(ret & DA9052_ADC_RES_LSB);
420 data |= calc_data;
422 ret = data;
424 err:
425 mutex_unlock(&da9052->auxadc_lock);
426 return ret;
428 EXPORT_SYMBOL_GPL(da9052_adc_manual_read);
430 int da9052_adc_read_temp(struct da9052 *da9052)
432 int tbat;
434 tbat = da9052_reg_read(da9052, DA9052_TBAT_RES_REG);
435 if (tbat <= 0)
436 return tbat;
438 /* ARRAY_SIZE check is not needed since TBAT is a 8-bit register */
439 return tbat_lookup[tbat - 1];
441 EXPORT_SYMBOL_GPL(da9052_adc_read_temp);
443 static const struct mfd_cell da9052_subdev_info[] = {
445 .name = "da9052-regulator",
446 .id = 0,
449 .name = "da9052-regulator",
450 .id = 1,
453 .name = "da9052-regulator",
454 .id = 2,
457 .name = "da9052-regulator",
458 .id = 3,
461 .name = "da9052-regulator",
462 .id = 4,
465 .name = "da9052-regulator",
466 .id = 5,
469 .name = "da9052-regulator",
470 .id = 6,
473 .name = "da9052-regulator",
474 .id = 7,
477 .name = "da9052-regulator",
478 .id = 8,
481 .name = "da9052-regulator",
482 .id = 9,
485 .name = "da9052-regulator",
486 .id = 10,
489 .name = "da9052-regulator",
490 .id = 11,
493 .name = "da9052-regulator",
494 .id = 12,
497 .name = "da9052-regulator",
498 .id = 13,
501 .name = "da9052-onkey",
504 .name = "da9052-rtc",
507 .name = "da9052-gpio",
510 .name = "da9052-hwmon",
513 .name = "da9052-leds",
516 .name = "da9052-wled1",
519 .name = "da9052-wled2",
522 .name = "da9052-wled3",
525 .name = "da9052-bat",
528 .name = "da9052-watchdog",
532 static const struct mfd_cell da9052_tsi_subdev_info[] = {
533 { .name = "da9052-tsi" },
536 const struct regmap_config da9052_regmap_config = {
537 .reg_bits = 8,
538 .val_bits = 8,
540 .cache_type = REGCACHE_RBTREE,
542 .max_register = DA9052_PAGE1_CON_REG,
543 .readable_reg = da9052_reg_readable,
544 .writeable_reg = da9052_reg_writeable,
545 .volatile_reg = da9052_reg_volatile,
547 EXPORT_SYMBOL_GPL(da9052_regmap_config);
549 static int da9052_clear_fault_log(struct da9052 *da9052)
551 int ret = 0;
552 int fault_log = 0;
554 fault_log = da9052_reg_read(da9052, DA9052_FAULTLOG_REG);
555 if (fault_log < 0) {
556 dev_err(da9052->dev,
557 "Cannot read FAULT_LOG %d\n", fault_log);
558 return fault_log;
561 if (fault_log) {
562 if (fault_log & DA9052_FAULTLOG_TWDERROR)
563 dev_dbg(da9052->dev,
564 "Fault log entry detected: TWD_ERROR\n");
565 if (fault_log & DA9052_FAULTLOG_VDDFAULT)
566 dev_dbg(da9052->dev,
567 "Fault log entry detected: VDD_FAULT\n");
568 if (fault_log & DA9052_FAULTLOG_VDDSTART)
569 dev_dbg(da9052->dev,
570 "Fault log entry detected: VDD_START\n");
571 if (fault_log & DA9052_FAULTLOG_TEMPOVER)
572 dev_dbg(da9052->dev,
573 "Fault log entry detected: TEMP_OVER\n");
574 if (fault_log & DA9052_FAULTLOG_KEYSHUT)
575 dev_dbg(da9052->dev,
576 "Fault log entry detected: KEY_SHUT\n");
577 if (fault_log & DA9052_FAULTLOG_NSDSET)
578 dev_dbg(da9052->dev,
579 "Fault log entry detected: nSD_SHUT\n");
580 if (fault_log & DA9052_FAULTLOG_WAITSET)
581 dev_dbg(da9052->dev,
582 "Fault log entry detected: WAIT_SHUT\n");
584 ret = da9052_reg_write(da9052,
585 DA9052_FAULTLOG_REG,
586 0xFF);
587 if (ret < 0)
588 dev_err(da9052->dev,
589 "Cannot reset FAULT_LOG values %d\n", ret);
592 return ret;
595 int da9052_device_init(struct da9052 *da9052, u8 chip_id)
597 struct da9052_pdata *pdata = dev_get_platdata(da9052->dev);
598 int ret;
600 mutex_init(&da9052->auxadc_lock);
601 init_completion(&da9052->done);
603 ret = da9052_clear_fault_log(da9052);
604 if (ret < 0)
605 dev_warn(da9052->dev, "Cannot clear FAULT_LOG\n");
607 if (pdata && pdata->init != NULL)
608 pdata->init(da9052);
610 da9052->chip_id = chip_id;
612 ret = da9052_irq_init(da9052);
613 if (ret != 0) {
614 dev_err(da9052->dev, "da9052_irq_init failed: %d\n", ret);
615 return ret;
618 ret = mfd_add_devices(da9052->dev, PLATFORM_DEVID_AUTO,
619 da9052_subdev_info,
620 ARRAY_SIZE(da9052_subdev_info), NULL, 0, NULL);
621 if (ret) {
622 dev_err(da9052->dev, "mfd_add_devices failed: %d\n", ret);
623 goto err;
627 * Check if touchscreen pins are used are analogue input instead
628 * of having a touchscreen connected to them. The analogue input
629 * functionality will be provided by hwmon driver (if enabled).
631 if (!device_property_read_bool(da9052->dev, "dlg,tsi-as-adc")) {
632 ret = mfd_add_devices(da9052->dev, PLATFORM_DEVID_AUTO,
633 da9052_tsi_subdev_info,
634 ARRAY_SIZE(da9052_tsi_subdev_info),
635 NULL, 0, NULL);
636 if (ret) {
637 dev_err(da9052->dev, "failed to add TSI subdev: %d\n",
638 ret);
639 goto err;
643 return 0;
645 err:
646 mfd_remove_devices(da9052->dev);
647 da9052_irq_exit(da9052);
649 return ret;
652 void da9052_device_exit(struct da9052 *da9052)
654 mfd_remove_devices(da9052->dev);
655 da9052_irq_exit(da9052);
658 MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
659 MODULE_DESCRIPTION("DA9052 MFD Core");
660 MODULE_LICENSE("GPL");