Linux 4.19.133

[linux/fpc-iii.git] / drivers / mfd / intel_msic.c

/*
 * Driver for Intel MSIC
 *
 * Copyright (C) 2011, Intel Corporation
 * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/init.h>
#include <linux/mfd/core.h>
#include <linux/mfd/intel_msic.h>
#include <linux/platform_device.h>
#include <linux/slab.h>

#include <asm/intel_scu_ipc.h>

#define MSIC_VENDOR(id)         ((id >> 6) & 3)
#define MSIC_VERSION(id)        (id & 0x3f)
#define MSIC_MAJOR(id)          ('A' + ((id >> 3) & 7))
#define MSIC_MINOR(id)          (id & 7)

/*
 * MSIC interrupt tree is readable from SRAM at INTEL_MSIC_IRQ_PHYS_BASE.
 * Since IRQ block starts from address 0x002 we need to subtract that from
 * the actual IRQ status register address.
 */
#define MSIC_IRQ_STATUS(x)      (INTEL_MSIC_IRQ_PHYS_BASE + ((x) - 2))
#define MSIC_IRQ_STATUS_ACCDET  MSIC_IRQ_STATUS(INTEL_MSIC_ACCDET)

/*
 * The SCU hardware has limitation of 16 bytes per read/write buffer on
 * Medfield.
 */
#define SCU_IPC_RWBUF_LIMIT     16

/**
 * struct intel_msic - an MSIC MFD instance
 * @pdev: pointer to the platform device
 * @vendor: vendor ID
 * @version: chip version
 * @irq_base: base address of the mapped MSIC SRAM interrupt tree
 */
struct intel_msic {
        struct platform_device          *pdev;
        unsigned                        vendor;
        unsigned                        version;
        void __iomem                    *irq_base;
};

static struct resource msic_touch_resources[] = {
        {
                .flags          = IORESOURCE_IRQ,
        },
};

static struct resource msic_adc_resources[] = {
        {
                .flags          = IORESOURCE_IRQ,
        },
};

static struct resource msic_battery_resources[] = {
        {
                .flags          = IORESOURCE_IRQ,
        },
};

static struct resource msic_gpio_resources[] = {
        {
                .flags          = IORESOURCE_IRQ,
        },
};

static struct resource msic_audio_resources[] = {
        {
                .name           = "IRQ",
                .flags          = IORESOURCE_IRQ,
        },
        /*
         * We will pass IRQ_BASE to the driver now but this can be removed
         * when/if the driver starts to use intel_msic_irq_read().
         */
        {
                .name           = "IRQ_BASE",
                .flags          = IORESOURCE_MEM,
                .start          = MSIC_IRQ_STATUS_ACCDET,
                .end            = MSIC_IRQ_STATUS_ACCDET,
        },
};

static struct resource msic_hdmi_resources[] = {
        {
                .flags          = IORESOURCE_IRQ,
        },
};

static struct resource msic_thermal_resources[] = {
        {
                .flags          = IORESOURCE_IRQ,
        },
};

static struct resource msic_power_btn_resources[] = {
        {
                .flags          = IORESOURCE_IRQ,
        },
};

static struct resource msic_ocd_resources[] = {
        {
                .flags          = IORESOURCE_IRQ,
        },
};

/*
 * Devices that are part of the MSIC and are available via firmware
 * populated SFI DEVS table.
 */
static struct mfd_cell msic_devs[] = {
        [INTEL_MSIC_BLOCK_TOUCH]        = {
                .name                   = "msic_touch",
                .num_resources          = ARRAY_SIZE(msic_touch_resources),
                .resources              = msic_touch_resources,
        },
        [INTEL_MSIC_BLOCK_ADC]          = {
                .name                   = "msic_adc",
                .num_resources          = ARRAY_SIZE(msic_adc_resources),
                .resources              = msic_adc_resources,
        },
        [INTEL_MSIC_BLOCK_BATTERY]      = {
                .name                   = "msic_battery",
                .num_resources          = ARRAY_SIZE(msic_battery_resources),
                .resources              = msic_battery_resources,
        },
        [INTEL_MSIC_BLOCK_GPIO]         = {
                .name                   = "msic_gpio",
                .num_resources          = ARRAY_SIZE(msic_gpio_resources),
                .resources              = msic_gpio_resources,
        },
        [INTEL_MSIC_BLOCK_AUDIO]        = {
                .name                   = "msic_audio",
                .num_resources          = ARRAY_SIZE(msic_audio_resources),
                .resources              = msic_audio_resources,
        },
        [INTEL_MSIC_BLOCK_HDMI]         = {
                .name                   = "msic_hdmi",
                .num_resources          = ARRAY_SIZE(msic_hdmi_resources),
                .resources              = msic_hdmi_resources,
        },
        [INTEL_MSIC_BLOCK_THERMAL]      = {
                .name                   = "msic_thermal",
                .num_resources          = ARRAY_SIZE(msic_thermal_resources),
                .resources              = msic_thermal_resources,
        },
        [INTEL_MSIC_BLOCK_POWER_BTN]    = {
                .name                   = "msic_power_btn",
                .num_resources          = ARRAY_SIZE(msic_power_btn_resources),
                .resources              = msic_power_btn_resources,
        },
        [INTEL_MSIC_BLOCK_OCD]          = {
                .name                   = "msic_ocd",
                .num_resources          = ARRAY_SIZE(msic_ocd_resources),
                .resources              = msic_ocd_resources,
        },
};

/*
 * Other MSIC related devices which are not directly available via SFI DEVS
 * table. These can be pseudo devices, regulators etc. which are needed for
 * different purposes.
 *
 * These devices appear only after the MSIC driver itself is initialized so
 * we can guarantee that the SCU IPC interface is ready.
 */
static const struct mfd_cell msic_other_devs[] = {
        /* Audio codec in the MSIC */
        {
                .id                     = -1,
                .name                   = "sn95031",
        },
};

/**
 * intel_msic_reg_read - read a single MSIC register
 * @reg: register to read
 * @val: register value is placed here
 *
 * Read a single register from MSIC. Returns %0 on success and negative
 * errno in case of failure.
 *
 * Function may sleep.
 */
int intel_msic_reg_read(unsigned short reg, u8 *val)
{
        return intel_scu_ipc_ioread8(reg, val);
}
EXPORT_SYMBOL_GPL(intel_msic_reg_read);

/**
 * intel_msic_reg_write - write a single MSIC register
 * @reg: register to write
 * @val: value to write to that register
 *
 * Write a single MSIC register. Returns 0 on success and negative
 * errno in case of failure.
 *
 * Function may sleep.
 */
int intel_msic_reg_write(unsigned short reg, u8 val)
{
        return intel_scu_ipc_iowrite8(reg, val);
}
EXPORT_SYMBOL_GPL(intel_msic_reg_write);

/**
 * intel_msic_reg_update - update a single MSIC register
 * @reg: register to update
 * @val: value to write to the register
 * @mask: specifies which of the bits are updated (%0 = don't update,
 *        %1 = update)
 *
 * Perform an update to a register @reg. @mask is used to specify which
 * bits are updated. Returns %0 in case of success and negative errno in
 * case of failure.
 *
 * Function may sleep.
 */
int intel_msic_reg_update(unsigned short reg, u8 val, u8 mask)
{
        return intel_scu_ipc_update_register(reg, val, mask);
}
EXPORT_SYMBOL_GPL(intel_msic_reg_update);

/**
 * intel_msic_bulk_read - read an array of registers
 * @reg: array of register addresses to read
 * @buf: array where the read values are placed
 * @count: number of registers to read
 *
 * Function reads @count registers from the MSIC using addresses passed in
 * @reg. Read values are placed in @buf. Reads are performed atomically
 * wrt. MSIC.
 *
 * Returns %0 in case of success and negative errno in case of failure.
 *
 * Function may sleep.
 */
int intel_msic_bulk_read(unsigned short *reg, u8 *buf, size_t count)
{
        if (WARN_ON(count > SCU_IPC_RWBUF_LIMIT))
                return -EINVAL;

        return intel_scu_ipc_readv(reg, buf, count);
}
EXPORT_SYMBOL_GPL(intel_msic_bulk_read);

/**
 * intel_msic_bulk_write - write an array of values to the MSIC registers
 * @reg: array of registers to write
 * @buf: values to write to each register
 * @count: number of registers to write
 *
 * Function writes @count registers in @buf to MSIC. Writes are performed
 * atomically wrt MSIC. Returns %0 in case of success and negative errno in
 * case of failure.
 *
 * Function may sleep.
 */
int intel_msic_bulk_write(unsigned short *reg, u8 *buf, size_t count)
{
        if (WARN_ON(count > SCU_IPC_RWBUF_LIMIT))
                return -EINVAL;

        return intel_scu_ipc_writev(reg, buf, count);
}
EXPORT_SYMBOL_GPL(intel_msic_bulk_write);

/**
 * intel_msic_irq_read - read a register from an MSIC interrupt tree
 * @msic: MSIC instance
 * @reg: interrupt register (between %INTEL_MSIC_IRQLVL1 and
 *       %INTEL_MSIC_RESETIRQ2)
 * @val: value of the register is placed here
 *
 * This function can be used by an MSIC subdevice interrupt handler to read
 * a register value from the MSIC interrupt tree. In this way subdevice
 * drivers don't have to map in the interrupt tree themselves but can just
 * call this function instead.
 *
 * Function doesn't sleep and is callable from interrupt context.
 *
 * Returns %-EINVAL if @reg is outside of the allowed register region.
 */
int intel_msic_irq_read(struct intel_msic *msic, unsigned short reg, u8 *val)
{
        if (WARN_ON(reg < INTEL_MSIC_IRQLVL1 || reg > INTEL_MSIC_RESETIRQ2))
                return -EINVAL;

        *val = readb(msic->irq_base + (reg - INTEL_MSIC_IRQLVL1));
        return 0;
}
EXPORT_SYMBOL_GPL(intel_msic_irq_read);

static int intel_msic_init_devices(struct intel_msic *msic)
{
        struct platform_device *pdev = msic->pdev;
        struct intel_msic_platform_data *pdata = dev_get_platdata(&pdev->dev);
        int ret, i;

        if (pdata->gpio) {
                struct mfd_cell *cell = &msic_devs[INTEL_MSIC_BLOCK_GPIO];

                cell->platform_data = pdata->gpio;
                cell->pdata_size = sizeof(*pdata->gpio);
        }

        if (pdata->ocd) {
                unsigned gpio = pdata->ocd->gpio;

                ret = devm_gpio_request_one(&pdev->dev, gpio,
                                        GPIOF_IN, "ocd_gpio");
                if (ret) {
                        dev_err(&pdev->dev, "failed to register OCD GPIO\n");
                        return ret;
                }

                ret = gpio_to_irq(gpio);
                if (ret < 0) {
                        dev_err(&pdev->dev, "no IRQ number for OCD GPIO\n");
                        return ret;
                }

                /* Update the IRQ number for the OCD */
                pdata->irq[INTEL_MSIC_BLOCK_OCD] = ret;
        }

        for (i = 0; i < ARRAY_SIZE(msic_devs); i++) {
                if (!pdata->irq[i])
                        continue;

                ret = mfd_add_devices(&pdev->dev, -1, &msic_devs[i], 1, NULL,
                                      pdata->irq[i], NULL);
                if (ret)
                        goto fail;
        }

        ret = mfd_add_devices(&pdev->dev, 0, msic_other_devs,
                              ARRAY_SIZE(msic_other_devs), NULL, 0, NULL);
        if (ret)
                goto fail;

        return 0;

fail:
        mfd_remove_devices(&pdev->dev);

        return ret;
}

static void intel_msic_remove_devices(struct intel_msic *msic)
{
        struct platform_device *pdev = msic->pdev;

        mfd_remove_devices(&pdev->dev);
}

static int intel_msic_probe(struct platform_device *pdev)
{
        struct intel_msic_platform_data *pdata = dev_get_platdata(&pdev->dev);
        struct intel_msic *msic;
        struct resource *res;
        u8 id0, id1;
        int ret;

        if (!pdata) {
                dev_err(&pdev->dev, "no platform data passed\n");
                return -EINVAL;
        }

        /* First validate that we have an MSIC in place */
        ret = intel_scu_ipc_ioread8(INTEL_MSIC_ID0, &id0);
        if (ret) {
                dev_err(&pdev->dev, "failed to identify the MSIC chip (ID0)\n");
                return -ENXIO;
        }

        ret = intel_scu_ipc_ioread8(INTEL_MSIC_ID1, &id1);
        if (ret) {
                dev_err(&pdev->dev, "failed to identify the MSIC chip (ID1)\n");
                return -ENXIO;
        }

        if (MSIC_VENDOR(id0) != MSIC_VENDOR(id1)) {
                dev_err(&pdev->dev, "invalid vendor ID: %x, %x\n", id0, id1);
                return -ENXIO;
        }

        msic = devm_kzalloc(&pdev->dev, sizeof(*msic), GFP_KERNEL);
        if (!msic)
                return -ENOMEM;

        msic->vendor = MSIC_VENDOR(id0);
        msic->version = MSIC_VERSION(id0);
        msic->pdev = pdev;

        /*
         * Map in the MSIC interrupt tree area in SRAM. This is exposed to
         * the clients via intel_msic_irq_read().
         */
        res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
        msic->irq_base = devm_ioremap_resource(&pdev->dev, res);
        if (IS_ERR(msic->irq_base))
                return PTR_ERR(msic->irq_base);

        platform_set_drvdata(pdev, msic);

        ret = intel_msic_init_devices(msic);
        if (ret) {
                dev_err(&pdev->dev, "failed to initialize MSIC devices\n");
                return ret;
        }

        dev_info(&pdev->dev, "Intel MSIC version %c%d (vendor %#x)\n",
                 MSIC_MAJOR(msic->version), MSIC_MINOR(msic->version),
                 msic->vendor);

        return 0;
}

static int intel_msic_remove(struct platform_device *pdev)
{
        struct intel_msic *msic = platform_get_drvdata(pdev);

        intel_msic_remove_devices(msic);

        return 0;
}

static struct platform_driver intel_msic_driver = {
        .probe          = intel_msic_probe,
        .remove         = intel_msic_remove,
        .driver         = {
                .name   = "intel_msic",
        },
};
builtin_platform_driver(intel_msic_driver);