Linux 4.19.133
[linux/fpc-iii.git] / drivers / mfd / wm8350-core.c
blob8a07c5634aee4d78d11ac0b8aaeb7f5d586c3a94
1 /*
2 * wm8350-core.c -- Device access for Wolfson WM8350
4 * Copyright 2007, 2008 Wolfson Microelectronics PLC.
6 * Author: Liam Girdwood, Mark Brown
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2 of the License, or (at your
11 * option) any later version.
15 #include <linux/kernel.h>
16 #include <linux/module.h>
17 #include <linux/slab.h>
18 #include <linux/bug.h>
19 #include <linux/device.h>
20 #include <linux/delay.h>
21 #include <linux/interrupt.h>
22 #include <linux/regmap.h>
23 #include <linux/workqueue.h>
25 #include <linux/mfd/wm8350/core.h>
26 #include <linux/mfd/wm8350/audio.h>
27 #include <linux/mfd/wm8350/comparator.h>
28 #include <linux/mfd/wm8350/gpio.h>
29 #include <linux/mfd/wm8350/pmic.h>
30 #include <linux/mfd/wm8350/rtc.h>
31 #include <linux/mfd/wm8350/supply.h>
32 #include <linux/mfd/wm8350/wdt.h>
34 #define WM8350_CLOCK_CONTROL_1 0x28
35 #define WM8350_AIF_TEST 0x74
37 /* debug */
38 #define WM8350_BUS_DEBUG 0
39 #if WM8350_BUS_DEBUG
40 #define dump(regs, src) do { \
41 int i_; \
42 u16 *src_ = src; \
43 printk(KERN_DEBUG); \
44 for (i_ = 0; i_ < regs; i_++) \
45 printk(" 0x%4.4x", *src_++); \
46 printk("\n"); \
47 } while (0);
48 #else
49 #define dump(bytes, src)
50 #endif
52 #define WM8350_LOCK_DEBUG 0
53 #if WM8350_LOCK_DEBUG
54 #define ldbg(format, arg...) printk(format, ## arg)
55 #else
56 #define ldbg(format, arg...)
57 #endif
60 * WM8350 Device IO
62 static DEFINE_MUTEX(reg_lock_mutex);
65 * Safe read, modify, write methods
67 int wm8350_clear_bits(struct wm8350 *wm8350, u16 reg, u16 mask)
69 return regmap_update_bits(wm8350->regmap, reg, mask, 0);
71 EXPORT_SYMBOL_GPL(wm8350_clear_bits);
73 int wm8350_set_bits(struct wm8350 *wm8350, u16 reg, u16 mask)
75 return regmap_update_bits(wm8350->regmap, reg, mask, mask);
77 EXPORT_SYMBOL_GPL(wm8350_set_bits);
79 u16 wm8350_reg_read(struct wm8350 *wm8350, int reg)
81 unsigned int data;
82 int err;
84 err = regmap_read(wm8350->regmap, reg, &data);
85 if (err)
86 dev_err(wm8350->dev, "read from reg R%d failed\n", reg);
88 return data;
90 EXPORT_SYMBOL_GPL(wm8350_reg_read);
92 int wm8350_reg_write(struct wm8350 *wm8350, int reg, u16 val)
94 int ret;
96 ret = regmap_write(wm8350->regmap, reg, val);
98 if (ret)
99 dev_err(wm8350->dev, "write to reg R%d failed\n", reg);
100 return ret;
102 EXPORT_SYMBOL_GPL(wm8350_reg_write);
104 int wm8350_block_read(struct wm8350 *wm8350, int start_reg, int regs,
105 u16 *dest)
107 int err = 0;
109 err = regmap_bulk_read(wm8350->regmap, start_reg, dest, regs);
110 if (err)
111 dev_err(wm8350->dev, "block read starting from R%d failed\n",
112 start_reg);
114 return err;
116 EXPORT_SYMBOL_GPL(wm8350_block_read);
118 int wm8350_block_write(struct wm8350 *wm8350, int start_reg, int regs,
119 u16 *src)
121 int ret = 0;
123 ret = regmap_bulk_write(wm8350->regmap, start_reg, src, regs);
124 if (ret)
125 dev_err(wm8350->dev, "block write starting at R%d failed\n",
126 start_reg);
128 return ret;
130 EXPORT_SYMBOL_GPL(wm8350_block_write);
133 * wm8350_reg_lock()
135 * The WM8350 has a hardware lock which can be used to prevent writes to
136 * some registers (generally those which can cause particularly serious
137 * problems if misused). This function enables that lock.
139 int wm8350_reg_lock(struct wm8350 *wm8350)
141 int ret;
143 mutex_lock(&reg_lock_mutex);
145 ldbg(__func__);
147 ret = wm8350_reg_write(wm8350, WM8350_SECURITY, WM8350_LOCK_KEY);
148 if (ret)
149 dev_err(wm8350->dev, "lock failed\n");
151 wm8350->unlocked = false;
153 mutex_unlock(&reg_lock_mutex);
155 return ret;
157 EXPORT_SYMBOL_GPL(wm8350_reg_lock);
160 * wm8350_reg_unlock()
162 * The WM8350 has a hardware lock which can be used to prevent writes to
163 * some registers (generally those which can cause particularly serious
164 * problems if misused). This function disables that lock so updates
165 * can be performed. For maximum safety this should be done only when
166 * required.
168 int wm8350_reg_unlock(struct wm8350 *wm8350)
170 int ret;
172 mutex_lock(&reg_lock_mutex);
174 ldbg(__func__);
176 ret = wm8350_reg_write(wm8350, WM8350_SECURITY, WM8350_UNLOCK_KEY);
177 if (ret)
178 dev_err(wm8350->dev, "unlock failed\n");
180 wm8350->unlocked = true;
182 mutex_unlock(&reg_lock_mutex);
184 return ret;
186 EXPORT_SYMBOL_GPL(wm8350_reg_unlock);
188 int wm8350_read_auxadc(struct wm8350 *wm8350, int channel, int scale, int vref)
190 u16 reg, result = 0;
192 if (channel < WM8350_AUXADC_AUX1 || channel > WM8350_AUXADC_TEMP)
193 return -EINVAL;
194 if (channel >= WM8350_AUXADC_USB && channel <= WM8350_AUXADC_TEMP
195 && (scale != 0 || vref != 0))
196 return -EINVAL;
198 mutex_lock(&wm8350->auxadc_mutex);
200 /* Turn on the ADC */
201 reg = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5);
202 wm8350_reg_write(wm8350, WM8350_POWER_MGMT_5, reg | WM8350_AUXADC_ENA);
204 if (scale || vref) {
205 reg = scale << 13;
206 reg |= vref << 12;
207 wm8350_reg_write(wm8350, WM8350_AUX1_READBACK + channel, reg);
210 reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1);
211 reg |= 1 << channel | WM8350_AUXADC_POLL;
212 wm8350_reg_write(wm8350, WM8350_DIGITISER_CONTROL_1, reg);
214 /* If a late IRQ left the completion signalled then consume
215 * the completion. */
216 try_wait_for_completion(&wm8350->auxadc_done);
218 /* We ignore the result of the completion and just check for a
219 * conversion result, allowing us to soldier on if the IRQ
220 * infrastructure is not set up for the chip. */
221 wait_for_completion_timeout(&wm8350->auxadc_done, msecs_to_jiffies(5));
223 reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1);
224 if (reg & WM8350_AUXADC_POLL)
225 dev_err(wm8350->dev, "adc chn %d read timeout\n", channel);
226 else
227 result = wm8350_reg_read(wm8350,
228 WM8350_AUX1_READBACK + channel);
230 /* Turn off the ADC */
231 reg = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5);
232 wm8350_reg_write(wm8350, WM8350_POWER_MGMT_5,
233 reg & ~WM8350_AUXADC_ENA);
235 mutex_unlock(&wm8350->auxadc_mutex);
237 return result & WM8350_AUXADC_DATA1_MASK;
239 EXPORT_SYMBOL_GPL(wm8350_read_auxadc);
241 static irqreturn_t wm8350_auxadc_irq(int irq, void *irq_data)
243 struct wm8350 *wm8350 = irq_data;
245 complete(&wm8350->auxadc_done);
247 return IRQ_HANDLED;
251 * Register a client device. This is non-fatal since there is no need to
252 * fail the entire device init due to a single platform device failing.
254 static void wm8350_client_dev_register(struct wm8350 *wm8350,
255 const char *name,
256 struct platform_device **pdev)
258 int ret;
260 *pdev = platform_device_alloc(name, -1);
261 if (*pdev == NULL) {
262 dev_err(wm8350->dev, "Failed to allocate %s\n", name);
263 return;
266 (*pdev)->dev.parent = wm8350->dev;
267 platform_set_drvdata(*pdev, wm8350);
268 ret = platform_device_add(*pdev);
269 if (ret != 0) {
270 dev_err(wm8350->dev, "Failed to register %s: %d\n", name, ret);
271 platform_device_put(*pdev);
272 *pdev = NULL;
276 int wm8350_device_init(struct wm8350 *wm8350, int irq,
277 struct wm8350_platform_data *pdata)
279 int ret;
280 unsigned int id1, id2, mask_rev;
281 unsigned int cust_id, mode, chip_rev;
283 dev_set_drvdata(wm8350->dev, wm8350);
285 /* get WM8350 revision and config mode */
286 ret = regmap_read(wm8350->regmap, WM8350_RESET_ID, &id1);
287 if (ret != 0) {
288 dev_err(wm8350->dev, "Failed to read ID: %d\n", ret);
289 goto err;
292 ret = regmap_read(wm8350->regmap, WM8350_ID, &id2);
293 if (ret != 0) {
294 dev_err(wm8350->dev, "Failed to read ID: %d\n", ret);
295 goto err;
298 ret = regmap_read(wm8350->regmap, WM8350_REVISION, &mask_rev);
299 if (ret != 0) {
300 dev_err(wm8350->dev, "Failed to read revision: %d\n", ret);
301 goto err;
304 if (id1 != 0x6143) {
305 dev_err(wm8350->dev,
306 "Device with ID %x is not a WM8350\n", id1);
307 ret = -ENODEV;
308 goto err;
311 mode = (id2 & WM8350_CONF_STS_MASK) >> 10;
312 cust_id = id2 & WM8350_CUST_ID_MASK;
313 chip_rev = (id2 & WM8350_CHIP_REV_MASK) >> 12;
314 dev_info(wm8350->dev,
315 "CONF_STS %d, CUST_ID %d, MASK_REV %d, CHIP_REV %d\n",
316 mode, cust_id, mask_rev, chip_rev);
318 if (cust_id != 0) {
319 dev_err(wm8350->dev, "Unsupported CUST_ID\n");
320 ret = -ENODEV;
321 goto err;
324 switch (mask_rev) {
325 case 0:
326 wm8350->pmic.max_dcdc = WM8350_DCDC_6;
327 wm8350->pmic.max_isink = WM8350_ISINK_B;
329 switch (chip_rev) {
330 case WM8350_REV_E:
331 dev_info(wm8350->dev, "WM8350 Rev E\n");
332 break;
333 case WM8350_REV_F:
334 dev_info(wm8350->dev, "WM8350 Rev F\n");
335 break;
336 case WM8350_REV_G:
337 dev_info(wm8350->dev, "WM8350 Rev G\n");
338 wm8350->power.rev_g_coeff = 1;
339 break;
340 case WM8350_REV_H:
341 dev_info(wm8350->dev, "WM8350 Rev H\n");
342 wm8350->power.rev_g_coeff = 1;
343 break;
344 default:
345 /* For safety we refuse to run on unknown hardware */
346 dev_err(wm8350->dev, "Unknown WM8350 CHIP_REV\n");
347 ret = -ENODEV;
348 goto err;
350 break;
352 case 1:
353 wm8350->pmic.max_dcdc = WM8350_DCDC_4;
354 wm8350->pmic.max_isink = WM8350_ISINK_A;
356 switch (chip_rev) {
357 case 0:
358 dev_info(wm8350->dev, "WM8351 Rev A\n");
359 wm8350->power.rev_g_coeff = 1;
360 break;
362 case 1:
363 dev_info(wm8350->dev, "WM8351 Rev B\n");
364 wm8350->power.rev_g_coeff = 1;
365 break;
367 default:
368 dev_err(wm8350->dev, "Unknown WM8351 CHIP_REV\n");
369 ret = -ENODEV;
370 goto err;
372 break;
374 case 2:
375 wm8350->pmic.max_dcdc = WM8350_DCDC_6;
376 wm8350->pmic.max_isink = WM8350_ISINK_B;
378 switch (chip_rev) {
379 case 0:
380 dev_info(wm8350->dev, "WM8352 Rev A\n");
381 wm8350->power.rev_g_coeff = 1;
382 break;
384 default:
385 dev_err(wm8350->dev, "Unknown WM8352 CHIP_REV\n");
386 ret = -ENODEV;
387 goto err;
389 break;
391 default:
392 dev_err(wm8350->dev, "Unknown MASK_REV\n");
393 ret = -ENODEV;
394 goto err;
397 mutex_init(&wm8350->auxadc_mutex);
398 init_completion(&wm8350->auxadc_done);
400 ret = wm8350_irq_init(wm8350, irq, pdata);
401 if (ret < 0)
402 goto err;
404 if (wm8350->irq_base) {
405 ret = request_threaded_irq(wm8350->irq_base +
406 WM8350_IRQ_AUXADC_DATARDY,
407 NULL, wm8350_auxadc_irq,
408 IRQF_ONESHOT,
409 "auxadc", wm8350);
410 if (ret < 0)
411 dev_warn(wm8350->dev,
412 "Failed to request AUXADC IRQ: %d\n", ret);
415 if (pdata && pdata->init) {
416 ret = pdata->init(wm8350);
417 if (ret != 0) {
418 dev_err(wm8350->dev, "Platform init() failed: %d\n",
419 ret);
420 goto err_irq;
424 wm8350_reg_write(wm8350, WM8350_SYSTEM_INTERRUPTS_MASK, 0x0);
426 wm8350_client_dev_register(wm8350, "wm8350-codec",
427 &(wm8350->codec.pdev));
428 wm8350_client_dev_register(wm8350, "wm8350-gpio",
429 &(wm8350->gpio.pdev));
430 wm8350_client_dev_register(wm8350, "wm8350-hwmon",
431 &(wm8350->hwmon.pdev));
432 wm8350_client_dev_register(wm8350, "wm8350-power",
433 &(wm8350->power.pdev));
434 wm8350_client_dev_register(wm8350, "wm8350-rtc", &(wm8350->rtc.pdev));
435 wm8350_client_dev_register(wm8350, "wm8350-wdt", &(wm8350->wdt.pdev));
437 return 0;
439 err_irq:
440 wm8350_irq_exit(wm8350);
441 err:
442 return ret;
444 EXPORT_SYMBOL_GPL(wm8350_device_init);
446 void wm8350_device_exit(struct wm8350 *wm8350)
448 int i;
450 for (i = 0; i < ARRAY_SIZE(wm8350->pmic.led); i++)
451 platform_device_unregister(wm8350->pmic.led[i].pdev);
453 for (i = 0; i < ARRAY_SIZE(wm8350->pmic.pdev); i++)
454 platform_device_unregister(wm8350->pmic.pdev[i]);
456 platform_device_unregister(wm8350->wdt.pdev);
457 platform_device_unregister(wm8350->rtc.pdev);
458 platform_device_unregister(wm8350->power.pdev);
459 platform_device_unregister(wm8350->hwmon.pdev);
460 platform_device_unregister(wm8350->gpio.pdev);
461 platform_device_unregister(wm8350->codec.pdev);
463 if (wm8350->irq_base)
464 free_irq(wm8350->irq_base + WM8350_IRQ_AUXADC_DATARDY, wm8350);
466 wm8350_irq_exit(wm8350);
468 EXPORT_SYMBOL_GPL(wm8350_device_exit);
470 MODULE_DESCRIPTION("WM8350 AudioPlus PMIC core driver");
471 MODULE_LICENSE("GPL");