2 * CAN driver for EMS Dr. Thomas Wuensche CPC-USB/ARM7
4 * Copyright (C) 2004-2009 EMS Dr. Thomas Wuensche
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published
8 * by the Free Software Foundation; version 2 of the License.
10 * This program is distributed in the hope that it will be useful, but
11 * WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
13 * General Public License for more details.
15 * You should have received a copy of the GNU General Public License along
16 * with this program; if not, write to the Free Software Foundation, Inc.,
17 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
19 #include <linux/signal.h>
20 #include <linux/slab.h>
21 #include <linux/module.h>
22 #include <linux/netdevice.h>
23 #include <linux/usb.h>
25 #include <linux/can.h>
26 #include <linux/can/dev.h>
27 #include <linux/can/error.h>
29 MODULE_AUTHOR("Sebastian Haas <haas@ems-wuensche.com>");
30 MODULE_DESCRIPTION("CAN driver for EMS Dr. Thomas Wuensche CAN/USB interfaces");
31 MODULE_LICENSE("GPL v2");
33 /* Control-Values for CPC_Control() Command Subject Selection */
34 #define CONTR_CAN_MESSAGE 0x04
35 #define CONTR_CAN_STATE 0x0C
36 #define CONTR_BUS_ERROR 0x1C
38 /* Control Command Actions */
39 #define CONTR_CONT_OFF 0
40 #define CONTR_CONT_ON 1
43 /* Messages from CPC to PC */
44 #define CPC_MSG_TYPE_CAN_FRAME 1 /* CAN data frame */
45 #define CPC_MSG_TYPE_RTR_FRAME 8 /* CAN remote frame */
46 #define CPC_MSG_TYPE_CAN_PARAMS 12 /* Actual CAN parameters */
47 #define CPC_MSG_TYPE_CAN_STATE 14 /* CAN state message */
48 #define CPC_MSG_TYPE_EXT_CAN_FRAME 16 /* Extended CAN data frame */
49 #define CPC_MSG_TYPE_EXT_RTR_FRAME 17 /* Extended remote frame */
50 #define CPC_MSG_TYPE_CONTROL 19 /* change interface behavior */
51 #define CPC_MSG_TYPE_CONFIRM 20 /* command processed confirmation */
52 #define CPC_MSG_TYPE_OVERRUN 21 /* overrun events */
53 #define CPC_MSG_TYPE_CAN_FRAME_ERROR 23 /* detected bus errors */
54 #define CPC_MSG_TYPE_ERR_COUNTER 25 /* RX/TX error counter */
56 /* Messages from the PC to the CPC interface */
57 #define CPC_CMD_TYPE_CAN_FRAME 1 /* CAN data frame */
58 #define CPC_CMD_TYPE_CONTROL 3 /* control of interface behavior */
59 #define CPC_CMD_TYPE_CAN_PARAMS 6 /* set CAN parameters */
60 #define CPC_CMD_TYPE_RTR_FRAME 13 /* CAN remote frame */
61 #define CPC_CMD_TYPE_CAN_STATE 14 /* CAN state message */
62 #define CPC_CMD_TYPE_EXT_CAN_FRAME 15 /* Extended CAN data frame */
63 #define CPC_CMD_TYPE_EXT_RTR_FRAME 16 /* Extended CAN remote frame */
64 #define CPC_CMD_TYPE_CAN_EXIT 200 /* exit the CAN */
66 #define CPC_CMD_TYPE_INQ_ERR_COUNTER 25 /* request the CAN error counters */
67 #define CPC_CMD_TYPE_CLEAR_MSG_QUEUE 8 /* clear CPC_MSG queue */
68 #define CPC_CMD_TYPE_CLEAR_CMD_QUEUE 28 /* clear CPC_CMD queue */
70 #define CPC_CC_TYPE_SJA1000 2 /* Philips basic CAN controller */
72 #define CPC_CAN_ECODE_ERRFRAME 0x01 /* Ecode type */
75 #define CPC_OVR_EVENT_CAN 0x01
76 #define CPC_OVR_EVENT_CANSTATE 0x02
77 #define CPC_OVR_EVENT_BUSERROR 0x04
80 * If the CAN controller lost a message we indicate it with the highest bit
81 * set in the count field.
83 #define CPC_OVR_HW 0x80
85 /* Size of the "struct ems_cpc_msg" without the union */
86 #define CPC_MSG_HEADER_LEN 11
87 #define CPC_CAN_MSG_MIN_SIZE 5
89 /* Define these values to match your devices */
90 #define USB_CPCUSB_VENDOR_ID 0x12D6
92 #define USB_CPCUSB_ARM7_PRODUCT_ID 0x0444
94 /* Mode register NXP LPC2119/SJA1000 CAN Controller */
95 #define SJA1000_MOD_NORMAL 0x00
96 #define SJA1000_MOD_RM 0x01
98 /* ECC register NXP LPC2119/SJA1000 CAN Controller */
99 #define SJA1000_ECC_SEG 0x1F
100 #define SJA1000_ECC_DIR 0x20
101 #define SJA1000_ECC_ERR 0x06
102 #define SJA1000_ECC_BIT 0x00
103 #define SJA1000_ECC_FORM 0x40
104 #define SJA1000_ECC_STUFF 0x80
105 #define SJA1000_ECC_MASK 0xc0
107 /* Status register content */
108 #define SJA1000_SR_BS 0x80
109 #define SJA1000_SR_ES 0x40
111 #define SJA1000_DEFAULT_OUTPUT_CONTROL 0xDA
114 * The device actually uses a 16MHz clock to generate the CAN clock
115 * but it expects SJA1000 bit settings based on 8MHz (is internally
118 #define EMS_USB_ARM7_CLOCK 8000000
120 #define CPC_TX_QUEUE_TRIGGER_LOW 25
121 #define CPC_TX_QUEUE_TRIGGER_HIGH 35
124 * CAN-Message representation in a CPC_MSG. Message object type is
125 * CPC_MSG_TYPE_CAN_FRAME or CPC_MSG_TYPE_RTR_FRAME or
126 * CPC_MSG_TYPE_EXT_CAN_FRAME or CPC_MSG_TYPE_EXT_RTR_FRAME.
134 /* Representation of the CAN parameters for the SJA1000 controller */
135 struct cpc_sja1000_params
{
150 /* CAN params message representation */
151 struct cpc_can_params
{
154 /* Will support M16C CAN controller in the future */
156 struct cpc_sja1000_params sja1000
;
160 /* Structure for confirmed message handling */
162 u8 error
; /* error code */
165 /* Structure for overrun conditions */
171 /* SJA1000 CAN errors (compatible to NXP LPC2119) */
172 struct cpc_sja1000_can_error
{
178 /* structure for CAN error conditions */
179 struct cpc_can_error
{
185 /* Other controllers may also provide error code capture regs */
187 struct cpc_sja1000_can_error sja1000
;
193 * Structure containing RX/TX error counter. This structure is used to request
194 * the values of the CAN controllers TX and RX error counter.
196 struct cpc_can_err_counter
{
201 /* Main message type used between library and application */
202 struct __packed ems_cpc_msg
{
203 u8 type
; /* type of message */
204 u8 length
; /* length of data within union 'msg' */
205 u8 msgid
; /* confirmation handle */
206 __le32 ts_sec
; /* timestamp in seconds */
207 __le32 ts_nsec
; /* timestamp in nano seconds */
211 struct cpc_can_msg can_msg
;
212 struct cpc_can_params can_params
;
213 struct cpc_confirm confirmation
;
214 struct cpc_overrun overrun
;
215 struct cpc_can_error error
;
216 struct cpc_can_err_counter err_counter
;
222 * Table of devices that work with this driver
223 * NOTE: This driver supports only CPC-USB/ARM7 (LPC2119) yet.
225 static struct usb_device_id ems_usb_table
[] = {
226 {USB_DEVICE(USB_CPCUSB_VENDOR_ID
, USB_CPCUSB_ARM7_PRODUCT_ID
)},
227 {} /* Terminating entry */
230 MODULE_DEVICE_TABLE(usb
, ems_usb_table
);
232 #define RX_BUFFER_SIZE 64
233 #define CPC_HEADER_SIZE 4
234 #define INTR_IN_BUFFER_SIZE 4
236 #define MAX_RX_URBS 10
237 #define MAX_TX_URBS 10
241 struct ems_tx_urb_context
{
249 struct can_priv can
; /* must be the first member */
251 struct sk_buff
*echo_skb
[MAX_TX_URBS
];
253 struct usb_device
*udev
;
254 struct net_device
*netdev
;
256 atomic_t active_tx_urbs
;
257 struct usb_anchor tx_submitted
;
258 struct ems_tx_urb_context tx_contexts
[MAX_TX_URBS
];
260 struct usb_anchor rx_submitted
;
262 struct urb
*intr_urb
;
267 unsigned int free_slots
; /* remember number of available slots */
269 struct ems_cpc_msg active_params
; /* active controller parameters */
272 static void ems_usb_read_interrupt_callback(struct urb
*urb
)
274 struct ems_usb
*dev
= urb
->context
;
275 struct net_device
*netdev
= dev
->netdev
;
278 if (!netif_device_present(netdev
))
281 switch (urb
->status
) {
283 dev
->free_slots
= dev
->intr_in_buffer
[1];
284 if (dev
->free_slots
> CPC_TX_QUEUE_TRIGGER_HIGH
&&
285 netif_queue_stopped(netdev
))
286 netif_wake_queue(netdev
);
289 case -ECONNRESET
: /* unlink */
297 netdev_info(netdev
, "Rx interrupt aborted %d\n", urb
->status
);
301 err
= usb_submit_urb(urb
, GFP_ATOMIC
);
304 netif_device_detach(netdev
);
306 netdev_err(netdev
, "failed resubmitting intr urb: %d\n", err
);
309 static void ems_usb_rx_can_msg(struct ems_usb
*dev
, struct ems_cpc_msg
*msg
)
311 struct can_frame
*cf
;
314 struct net_device_stats
*stats
= &dev
->netdev
->stats
;
316 skb
= alloc_can_skb(dev
->netdev
, &cf
);
320 cf
->can_id
= le32_to_cpu(msg
->msg
.can_msg
.id
);
321 cf
->can_dlc
= get_can_dlc(msg
->msg
.can_msg
.length
& 0xF);
323 if (msg
->type
== CPC_MSG_TYPE_EXT_CAN_FRAME
||
324 msg
->type
== CPC_MSG_TYPE_EXT_RTR_FRAME
)
325 cf
->can_id
|= CAN_EFF_FLAG
;
327 if (msg
->type
== CPC_MSG_TYPE_RTR_FRAME
||
328 msg
->type
== CPC_MSG_TYPE_EXT_RTR_FRAME
) {
329 cf
->can_id
|= CAN_RTR_FLAG
;
331 for (i
= 0; i
< cf
->can_dlc
; i
++)
332 cf
->data
[i
] = msg
->msg
.can_msg
.msg
[i
];
336 stats
->rx_bytes
+= cf
->can_dlc
;
340 static void ems_usb_rx_err(struct ems_usb
*dev
, struct ems_cpc_msg
*msg
)
342 struct can_frame
*cf
;
344 struct net_device_stats
*stats
= &dev
->netdev
->stats
;
346 skb
= alloc_can_err_skb(dev
->netdev
, &cf
);
350 if (msg
->type
== CPC_MSG_TYPE_CAN_STATE
) {
351 u8 state
= msg
->msg
.can_state
;
353 if (state
& SJA1000_SR_BS
) {
354 dev
->can
.state
= CAN_STATE_BUS_OFF
;
355 cf
->can_id
|= CAN_ERR_BUSOFF
;
357 dev
->can
.can_stats
.bus_off
++;
358 can_bus_off(dev
->netdev
);
359 } else if (state
& SJA1000_SR_ES
) {
360 dev
->can
.state
= CAN_STATE_ERROR_WARNING
;
361 dev
->can
.can_stats
.error_warning
++;
363 dev
->can
.state
= CAN_STATE_ERROR_ACTIVE
;
364 dev
->can
.can_stats
.error_passive
++;
366 } else if (msg
->type
== CPC_MSG_TYPE_CAN_FRAME_ERROR
) {
367 u8 ecc
= msg
->msg
.error
.cc
.regs
.sja1000
.ecc
;
368 u8 txerr
= msg
->msg
.error
.cc
.regs
.sja1000
.txerr
;
369 u8 rxerr
= msg
->msg
.error
.cc
.regs
.sja1000
.rxerr
;
371 /* bus error interrupt */
372 dev
->can
.can_stats
.bus_error
++;
375 cf
->can_id
|= CAN_ERR_PROT
| CAN_ERR_BUSERROR
;
377 switch (ecc
& SJA1000_ECC_MASK
) {
378 case SJA1000_ECC_BIT
:
379 cf
->data
[2] |= CAN_ERR_PROT_BIT
;
381 case SJA1000_ECC_FORM
:
382 cf
->data
[2] |= CAN_ERR_PROT_FORM
;
384 case SJA1000_ECC_STUFF
:
385 cf
->data
[2] |= CAN_ERR_PROT_STUFF
;
388 cf
->data
[3] = ecc
& SJA1000_ECC_SEG
;
392 /* Error occurred during transmission? */
393 if ((ecc
& SJA1000_ECC_DIR
) == 0)
394 cf
->data
[2] |= CAN_ERR_PROT_TX
;
396 if (dev
->can
.state
== CAN_STATE_ERROR_WARNING
||
397 dev
->can
.state
== CAN_STATE_ERROR_PASSIVE
) {
398 cf
->can_id
|= CAN_ERR_CRTL
;
399 cf
->data
[1] = (txerr
> rxerr
) ?
400 CAN_ERR_CRTL_TX_PASSIVE
: CAN_ERR_CRTL_RX_PASSIVE
;
402 } else if (msg
->type
== CPC_MSG_TYPE_OVERRUN
) {
403 cf
->can_id
|= CAN_ERR_CRTL
;
404 cf
->data
[1] = CAN_ERR_CRTL_RX_OVERFLOW
;
406 stats
->rx_over_errors
++;
411 stats
->rx_bytes
+= cf
->can_dlc
;
416 * callback for bulk IN urb
418 static void ems_usb_read_bulk_callback(struct urb
*urb
)
420 struct ems_usb
*dev
= urb
->context
;
421 struct net_device
*netdev
;
424 netdev
= dev
->netdev
;
426 if (!netif_device_present(netdev
))
429 switch (urb
->status
) {
430 case 0: /* success */
437 netdev_info(netdev
, "Rx URB aborted (%d)\n", urb
->status
);
441 if (urb
->actual_length
> CPC_HEADER_SIZE
) {
442 struct ems_cpc_msg
*msg
;
443 u8
*ibuf
= urb
->transfer_buffer
;
446 msg_count
= ibuf
[0] & ~0x80;
448 start
= CPC_HEADER_SIZE
;
451 msg
= (struct ems_cpc_msg
*)&ibuf
[start
];
454 case CPC_MSG_TYPE_CAN_STATE
:
455 /* Process CAN state changes */
456 ems_usb_rx_err(dev
, msg
);
459 case CPC_MSG_TYPE_CAN_FRAME
:
460 case CPC_MSG_TYPE_EXT_CAN_FRAME
:
461 case CPC_MSG_TYPE_RTR_FRAME
:
462 case CPC_MSG_TYPE_EXT_RTR_FRAME
:
463 ems_usb_rx_can_msg(dev
, msg
);
466 case CPC_MSG_TYPE_CAN_FRAME_ERROR
:
467 /* Process errorframe */
468 ems_usb_rx_err(dev
, msg
);
471 case CPC_MSG_TYPE_OVERRUN
:
472 /* Message lost while receiving */
473 ems_usb_rx_err(dev
, msg
);
477 start
+= CPC_MSG_HEADER_LEN
+ msg
->length
;
480 if (start
> urb
->transfer_buffer_length
) {
481 netdev_err(netdev
, "format error\n");
488 usb_fill_bulk_urb(urb
, dev
->udev
, usb_rcvbulkpipe(dev
->udev
, 2),
489 urb
->transfer_buffer
, RX_BUFFER_SIZE
,
490 ems_usb_read_bulk_callback
, dev
);
492 retval
= usb_submit_urb(urb
, GFP_ATOMIC
);
494 if (retval
== -ENODEV
)
495 netif_device_detach(netdev
);
498 "failed resubmitting read bulk urb: %d\n", retval
);
502 * callback for bulk IN urb
504 static void ems_usb_write_bulk_callback(struct urb
*urb
)
506 struct ems_tx_urb_context
*context
= urb
->context
;
508 struct net_device
*netdev
;
513 netdev
= dev
->netdev
;
515 /* free up our allocated buffer */
516 usb_free_coherent(urb
->dev
, urb
->transfer_buffer_length
,
517 urb
->transfer_buffer
, urb
->transfer_dma
);
519 atomic_dec(&dev
->active_tx_urbs
);
521 if (!netif_device_present(netdev
))
525 netdev_info(netdev
, "Tx URB aborted (%d)\n", urb
->status
);
527 netif_trans_update(netdev
);
529 /* transmission complete interrupt */
530 netdev
->stats
.tx_packets
++;
531 netdev
->stats
.tx_bytes
+= context
->dlc
;
533 can_get_echo_skb(netdev
, context
->echo_index
);
535 /* Release context */
536 context
->echo_index
= MAX_TX_URBS
;
541 * Send the given CPC command synchronously
543 static int ems_usb_command_msg(struct ems_usb
*dev
, struct ems_cpc_msg
*msg
)
548 memcpy(&dev
->tx_msg_buffer
[CPC_HEADER_SIZE
], msg
,
549 msg
->length
+ CPC_MSG_HEADER_LEN
);
552 memset(&dev
->tx_msg_buffer
[0], 0, CPC_HEADER_SIZE
);
554 return usb_bulk_msg(dev
->udev
, usb_sndbulkpipe(dev
->udev
, 2),
555 &dev
->tx_msg_buffer
[0],
556 msg
->length
+ CPC_MSG_HEADER_LEN
+ CPC_HEADER_SIZE
,
557 &actual_length
, 1000);
561 * Change CAN controllers' mode register
563 static int ems_usb_write_mode(struct ems_usb
*dev
, u8 mode
)
565 dev
->active_params
.msg
.can_params
.cc_params
.sja1000
.mode
= mode
;
567 return ems_usb_command_msg(dev
, &dev
->active_params
);
571 * Send a CPC_Control command to change behaviour when interface receives a CAN
572 * message, bus error or CAN state changed notifications.
574 static int ems_usb_control_cmd(struct ems_usb
*dev
, u8 val
)
576 struct ems_cpc_msg cmd
;
578 cmd
.type
= CPC_CMD_TYPE_CONTROL
;
579 cmd
.length
= CPC_MSG_HEADER_LEN
+ 1;
583 cmd
.msg
.generic
[0] = val
;
585 return ems_usb_command_msg(dev
, &cmd
);
591 static int ems_usb_start(struct ems_usb
*dev
)
593 struct net_device
*netdev
= dev
->netdev
;
596 dev
->intr_in_buffer
[0] = 0;
597 dev
->free_slots
= 50; /* initial size */
599 for (i
= 0; i
< MAX_RX_URBS
; i
++) {
600 struct urb
*urb
= NULL
;
603 /* create a URB, and a buffer for it */
604 urb
= usb_alloc_urb(0, GFP_KERNEL
);
610 buf
= usb_alloc_coherent(dev
->udev
, RX_BUFFER_SIZE
, GFP_KERNEL
,
613 netdev_err(netdev
, "No memory left for USB buffer\n");
619 usb_fill_bulk_urb(urb
, dev
->udev
, usb_rcvbulkpipe(dev
->udev
, 2),
621 ems_usb_read_bulk_callback
, dev
);
622 urb
->transfer_flags
|= URB_NO_TRANSFER_DMA_MAP
;
623 usb_anchor_urb(urb
, &dev
->rx_submitted
);
625 err
= usb_submit_urb(urb
, GFP_KERNEL
);
627 usb_unanchor_urb(urb
);
628 usb_free_coherent(dev
->udev
, RX_BUFFER_SIZE
, buf
,
634 /* Drop reference, USB core will take care of freeing it */
638 /* Did we submit any URBs */
640 netdev_warn(netdev
, "couldn't setup read URBs\n");
644 /* Warn if we've couldn't transmit all the URBs */
646 netdev_warn(netdev
, "rx performance may be slow\n");
648 /* Setup and start interrupt URB */
649 usb_fill_int_urb(dev
->intr_urb
, dev
->udev
,
650 usb_rcvintpipe(dev
->udev
, 1),
653 ems_usb_read_interrupt_callback
, dev
, 1);
655 err
= usb_submit_urb(dev
->intr_urb
, GFP_KERNEL
);
657 netdev_warn(netdev
, "intr URB submit failed: %d\n", err
);
662 /* CPC-USB will transfer received message to host */
663 err
= ems_usb_control_cmd(dev
, CONTR_CAN_MESSAGE
| CONTR_CONT_ON
);
667 /* CPC-USB will transfer CAN state changes to host */
668 err
= ems_usb_control_cmd(dev
, CONTR_CAN_STATE
| CONTR_CONT_ON
);
672 /* CPC-USB will transfer bus errors to host */
673 err
= ems_usb_control_cmd(dev
, CONTR_BUS_ERROR
| CONTR_CONT_ON
);
677 err
= ems_usb_write_mode(dev
, SJA1000_MOD_NORMAL
);
681 dev
->can
.state
= CAN_STATE_ERROR_ACTIVE
;
686 netdev_warn(netdev
, "couldn't submit control: %d\n", err
);
691 static void unlink_all_urbs(struct ems_usb
*dev
)
695 usb_unlink_urb(dev
->intr_urb
);
697 usb_kill_anchored_urbs(&dev
->rx_submitted
);
699 usb_kill_anchored_urbs(&dev
->tx_submitted
);
700 atomic_set(&dev
->active_tx_urbs
, 0);
702 for (i
= 0; i
< MAX_TX_URBS
; i
++)
703 dev
->tx_contexts
[i
].echo_index
= MAX_TX_URBS
;
706 static int ems_usb_open(struct net_device
*netdev
)
708 struct ems_usb
*dev
= netdev_priv(netdev
);
711 err
= ems_usb_write_mode(dev
, SJA1000_MOD_RM
);
716 err
= open_candev(netdev
);
720 /* finally start device */
721 err
= ems_usb_start(dev
);
724 netif_device_detach(dev
->netdev
);
726 netdev_warn(netdev
, "couldn't start device: %d\n", err
);
728 close_candev(netdev
);
734 netif_start_queue(netdev
);
739 static netdev_tx_t
ems_usb_start_xmit(struct sk_buff
*skb
, struct net_device
*netdev
)
741 struct ems_usb
*dev
= netdev_priv(netdev
);
742 struct ems_tx_urb_context
*context
= NULL
;
743 struct net_device_stats
*stats
= &netdev
->stats
;
744 struct can_frame
*cf
= (struct can_frame
*)skb
->data
;
745 struct ems_cpc_msg
*msg
;
749 size_t size
= CPC_HEADER_SIZE
+ CPC_MSG_HEADER_LEN
750 + sizeof(struct cpc_can_msg
);
752 if (can_dropped_invalid_skb(netdev
, skb
))
755 /* create a URB, and a buffer for it, and copy the data to the URB */
756 urb
= usb_alloc_urb(0, GFP_ATOMIC
);
760 buf
= usb_alloc_coherent(dev
->udev
, size
, GFP_ATOMIC
, &urb
->transfer_dma
);
762 netdev_err(netdev
, "No memory left for USB buffer\n");
767 msg
= (struct ems_cpc_msg
*)&buf
[CPC_HEADER_SIZE
];
769 msg
->msg
.can_msg
.id
= cpu_to_le32(cf
->can_id
& CAN_ERR_MASK
);
770 msg
->msg
.can_msg
.length
= cf
->can_dlc
;
772 if (cf
->can_id
& CAN_RTR_FLAG
) {
773 msg
->type
= cf
->can_id
& CAN_EFF_FLAG
?
774 CPC_CMD_TYPE_EXT_RTR_FRAME
: CPC_CMD_TYPE_RTR_FRAME
;
776 msg
->length
= CPC_CAN_MSG_MIN_SIZE
;
778 msg
->type
= cf
->can_id
& CAN_EFF_FLAG
?
779 CPC_CMD_TYPE_EXT_CAN_FRAME
: CPC_CMD_TYPE_CAN_FRAME
;
781 for (i
= 0; i
< cf
->can_dlc
; i
++)
782 msg
->msg
.can_msg
.msg
[i
] = cf
->data
[i
];
784 msg
->length
= CPC_CAN_MSG_MIN_SIZE
+ cf
->can_dlc
;
787 for (i
= 0; i
< MAX_TX_URBS
; i
++) {
788 if (dev
->tx_contexts
[i
].echo_index
== MAX_TX_URBS
) {
789 context
= &dev
->tx_contexts
[i
];
795 * May never happen! When this happens we'd more URBs in flight as
796 * allowed (MAX_TX_URBS).
799 usb_free_coherent(dev
->udev
, size
, buf
, urb
->transfer_dma
);
802 netdev_warn(netdev
, "couldn't find free context\n");
804 return NETDEV_TX_BUSY
;
808 context
->echo_index
= i
;
809 context
->dlc
= cf
->can_dlc
;
811 usb_fill_bulk_urb(urb
, dev
->udev
, usb_sndbulkpipe(dev
->udev
, 2), buf
,
812 size
, ems_usb_write_bulk_callback
, context
);
813 urb
->transfer_flags
|= URB_NO_TRANSFER_DMA_MAP
;
814 usb_anchor_urb(urb
, &dev
->tx_submitted
);
816 can_put_echo_skb(skb
, netdev
, context
->echo_index
);
818 atomic_inc(&dev
->active_tx_urbs
);
820 err
= usb_submit_urb(urb
, GFP_ATOMIC
);
822 can_free_echo_skb(netdev
, context
->echo_index
);
824 usb_unanchor_urb(urb
);
825 usb_free_coherent(dev
->udev
, size
, buf
, urb
->transfer_dma
);
828 atomic_dec(&dev
->active_tx_urbs
);
830 if (err
== -ENODEV
) {
831 netif_device_detach(netdev
);
833 netdev_warn(netdev
, "failed tx_urb %d\n", err
);
838 netif_trans_update(netdev
);
840 /* Slow down tx path */
841 if (atomic_read(&dev
->active_tx_urbs
) >= MAX_TX_URBS
||
842 dev
->free_slots
< CPC_TX_QUEUE_TRIGGER_LOW
) {
843 netif_stop_queue(netdev
);
848 * Release our reference to this URB, the USB core will eventually free
862 static int ems_usb_close(struct net_device
*netdev
)
864 struct ems_usb
*dev
= netdev_priv(netdev
);
867 unlink_all_urbs(dev
);
869 netif_stop_queue(netdev
);
871 /* Set CAN controller to reset mode */
872 if (ems_usb_write_mode(dev
, SJA1000_MOD_RM
))
873 netdev_warn(netdev
, "couldn't stop device");
875 close_candev(netdev
);
880 static const struct net_device_ops ems_usb_netdev_ops
= {
881 .ndo_open
= ems_usb_open
,
882 .ndo_stop
= ems_usb_close
,
883 .ndo_start_xmit
= ems_usb_start_xmit
,
884 .ndo_change_mtu
= can_change_mtu
,
887 static const struct can_bittiming_const ems_usb_bittiming_const
= {
899 static int ems_usb_set_mode(struct net_device
*netdev
, enum can_mode mode
)
901 struct ems_usb
*dev
= netdev_priv(netdev
);
905 if (ems_usb_write_mode(dev
, SJA1000_MOD_NORMAL
))
906 netdev_warn(netdev
, "couldn't start device");
908 if (netif_queue_stopped(netdev
))
909 netif_wake_queue(netdev
);
919 static int ems_usb_set_bittiming(struct net_device
*netdev
)
921 struct ems_usb
*dev
= netdev_priv(netdev
);
922 struct can_bittiming
*bt
= &dev
->can
.bittiming
;
925 btr0
= ((bt
->brp
- 1) & 0x3f) | (((bt
->sjw
- 1) & 0x3) << 6);
926 btr1
= ((bt
->prop_seg
+ bt
->phase_seg1
- 1) & 0xf) |
927 (((bt
->phase_seg2
- 1) & 0x7) << 4);
928 if (dev
->can
.ctrlmode
& CAN_CTRLMODE_3_SAMPLES
)
931 netdev_info(netdev
, "setting BTR0=0x%02x BTR1=0x%02x\n", btr0
, btr1
);
933 dev
->active_params
.msg
.can_params
.cc_params
.sja1000
.btr0
= btr0
;
934 dev
->active_params
.msg
.can_params
.cc_params
.sja1000
.btr1
= btr1
;
936 return ems_usb_command_msg(dev
, &dev
->active_params
);
939 static void init_params_sja1000(struct ems_cpc_msg
*msg
)
941 struct cpc_sja1000_params
*sja1000
=
942 &msg
->msg
.can_params
.cc_params
.sja1000
;
944 msg
->type
= CPC_CMD_TYPE_CAN_PARAMS
;
945 msg
->length
= sizeof(struct cpc_can_params
);
948 msg
->msg
.can_params
.cc_type
= CPC_CC_TYPE_SJA1000
;
950 /* Acceptance filter open */
951 sja1000
->acc_code0
= 0x00;
952 sja1000
->acc_code1
= 0x00;
953 sja1000
->acc_code2
= 0x00;
954 sja1000
->acc_code3
= 0x00;
956 /* Acceptance filter open */
957 sja1000
->acc_mask0
= 0xFF;
958 sja1000
->acc_mask1
= 0xFF;
959 sja1000
->acc_mask2
= 0xFF;
960 sja1000
->acc_mask3
= 0xFF;
965 sja1000
->outp_contr
= SJA1000_DEFAULT_OUTPUT_CONTROL
;
966 sja1000
->mode
= SJA1000_MOD_RM
;
970 * probe function for new CPC-USB devices
972 static int ems_usb_probe(struct usb_interface
*intf
,
973 const struct usb_device_id
*id
)
975 struct net_device
*netdev
;
977 int i
, err
= -ENOMEM
;
979 netdev
= alloc_candev(sizeof(struct ems_usb
), MAX_TX_URBS
);
981 dev_err(&intf
->dev
, "ems_usb: Couldn't alloc candev\n");
985 dev
= netdev_priv(netdev
);
987 dev
->udev
= interface_to_usbdev(intf
);
988 dev
->netdev
= netdev
;
990 dev
->can
.state
= CAN_STATE_STOPPED
;
991 dev
->can
.clock
.freq
= EMS_USB_ARM7_CLOCK
;
992 dev
->can
.bittiming_const
= &ems_usb_bittiming_const
;
993 dev
->can
.do_set_bittiming
= ems_usb_set_bittiming
;
994 dev
->can
.do_set_mode
= ems_usb_set_mode
;
995 dev
->can
.ctrlmode_supported
= CAN_CTRLMODE_3_SAMPLES
;
997 netdev
->netdev_ops
= &ems_usb_netdev_ops
;
999 netdev
->flags
|= IFF_ECHO
; /* we support local echo */
1001 init_usb_anchor(&dev
->rx_submitted
);
1003 init_usb_anchor(&dev
->tx_submitted
);
1004 atomic_set(&dev
->active_tx_urbs
, 0);
1006 for (i
= 0; i
< MAX_TX_URBS
; i
++)
1007 dev
->tx_contexts
[i
].echo_index
= MAX_TX_URBS
;
1009 dev
->intr_urb
= usb_alloc_urb(0, GFP_KERNEL
);
1011 goto cleanup_candev
;
1013 dev
->intr_in_buffer
= kzalloc(INTR_IN_BUFFER_SIZE
, GFP_KERNEL
);
1014 if (!dev
->intr_in_buffer
)
1015 goto cleanup_intr_urb
;
1017 dev
->tx_msg_buffer
= kzalloc(CPC_HEADER_SIZE
+
1018 sizeof(struct ems_cpc_msg
), GFP_KERNEL
);
1019 if (!dev
->tx_msg_buffer
)
1020 goto cleanup_intr_in_buffer
;
1022 usb_set_intfdata(intf
, dev
);
1024 SET_NETDEV_DEV(netdev
, &intf
->dev
);
1026 init_params_sja1000(&dev
->active_params
);
1028 err
= ems_usb_command_msg(dev
, &dev
->active_params
);
1030 netdev_err(netdev
, "couldn't initialize controller: %d\n", err
);
1031 goto cleanup_tx_msg_buffer
;
1034 err
= register_candev(netdev
);
1036 netdev_err(netdev
, "couldn't register CAN device: %d\n", err
);
1037 goto cleanup_tx_msg_buffer
;
1042 cleanup_tx_msg_buffer
:
1043 kfree(dev
->tx_msg_buffer
);
1045 cleanup_intr_in_buffer
:
1046 kfree(dev
->intr_in_buffer
);
1049 usb_free_urb(dev
->intr_urb
);
1052 free_candev(netdev
);
1058 * called by the usb core when the device is removed from the system
1060 static void ems_usb_disconnect(struct usb_interface
*intf
)
1062 struct ems_usb
*dev
= usb_get_intfdata(intf
);
1064 usb_set_intfdata(intf
, NULL
);
1067 unregister_netdev(dev
->netdev
);
1068 free_candev(dev
->netdev
);
1070 unlink_all_urbs(dev
);
1072 usb_free_urb(dev
->intr_urb
);
1074 kfree(dev
->intr_in_buffer
);
1075 kfree(dev
->tx_msg_buffer
);
1079 /* usb specific object needed to register this driver with the usb subsystem */
1080 static struct usb_driver ems_usb_driver
= {
1082 .probe
= ems_usb_probe
,
1083 .disconnect
= ems_usb_disconnect
,
1084 .id_table
= ems_usb_table
,
1087 module_usb_driver(ems_usb_driver
);