2 * CAN driver for esd CAN-USB/2 and CAN-USB/Micro
4 * Copyright (C) 2010-2012 Matthias Fuchs <matthias.fuchs@esd.eu>, esd gmbh
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published
8 * by the Free Software Foundation; version 2 of the License.
10 * This program is distributed in the hope that it will be useful, but
11 * WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
13 * General Public License for more details.
15 * You should have received a copy of the GNU General Public License along
16 * with this program; if not, write to the Free Software Foundation, Inc.,
17 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
19 #include <linux/signal.h>
20 #include <linux/slab.h>
21 #include <linux/module.h>
22 #include <linux/netdevice.h>
23 #include <linux/usb.h>
25 #include <linux/can.h>
26 #include <linux/can/dev.h>
27 #include <linux/can/error.h>
29 MODULE_AUTHOR("Matthias Fuchs <matthias.fuchs@esd.eu>");
30 MODULE_DESCRIPTION("CAN driver for esd CAN-USB/2 and CAN-USB/Micro interfaces");
31 MODULE_LICENSE("GPL v2");
33 /* Define these values to match your devices */
34 #define USB_ESDGMBH_VENDOR_ID 0x0ab4
35 #define USB_CANUSB2_PRODUCT_ID 0x0010
36 #define USB_CANUSBM_PRODUCT_ID 0x0011
38 #define ESD_USB2_CAN_CLOCK 60000000
39 #define ESD_USBM_CAN_CLOCK 36000000
40 #define ESD_USB2_MAX_NETS 2
43 #define CMD_VERSION 1 /* also used for VERSION_REPLY */
44 #define CMD_CAN_RX 2 /* device to host only */
45 #define CMD_CAN_TX 3 /* also used for TX_DONE */
46 #define CMD_SETBAUD 4 /* also used for SETBAUD_REPLY */
47 #define CMD_TS 5 /* also used for TS_REPLY */
48 #define CMD_IDADD 6 /* also used for IDADD_REPLY */
50 /* esd CAN message flags - dlc field */
53 /* esd CAN message flags - id field */
54 #define ESD_EXTID 0x20000000
55 #define ESD_EVENT 0x40000000
56 #define ESD_IDMASK 0x1fffffff
58 /* esd CAN event ids used by this driver */
59 #define ESD_EV_CAN_ERROR_EXT 2
61 /* baudrate message flags */
62 #define ESD_USB2_UBR 0x80000000
63 #define ESD_USB2_LOM 0x40000000
64 #define ESD_USB2_NO_BAUDRATE 0x7fffffff
65 #define ESD_USB2_TSEG1_MIN 1
66 #define ESD_USB2_TSEG1_MAX 16
67 #define ESD_USB2_TSEG1_SHIFT 16
68 #define ESD_USB2_TSEG2_MIN 1
69 #define ESD_USB2_TSEG2_MAX 8
70 #define ESD_USB2_TSEG2_SHIFT 20
71 #define ESD_USB2_SJW_MAX 4
72 #define ESD_USB2_SJW_SHIFT 14
73 #define ESD_USBM_SJW_SHIFT 24
74 #define ESD_USB2_BRP_MIN 1
75 #define ESD_USB2_BRP_MAX 1024
76 #define ESD_USB2_BRP_INC 1
77 #define ESD_USB2_3_SAMPLES 0x00800000
79 /* esd IDADD message */
80 #define ESD_ID_ENABLE 0x80
81 #define ESD_MAX_ID_SEGMENT 64
83 /* SJA1000 ECC register (emulated by usb2 firmware) */
84 #define SJA1000_ECC_SEG 0x1F
85 #define SJA1000_ECC_DIR 0x20
86 #define SJA1000_ECC_ERR 0x06
87 #define SJA1000_ECC_BIT 0x00
88 #define SJA1000_ECC_FORM 0x40
89 #define SJA1000_ECC_STUFF 0x80
90 #define SJA1000_ECC_MASK 0xc0
92 /* esd bus state event codes */
93 #define ESD_BUSSTATE_MASK 0xc0
94 #define ESD_BUSSTATE_WARN 0x40
95 #define ESD_BUSSTATE_ERRPASSIVE 0x80
96 #define ESD_BUSSTATE_BUSOFF 0xc0
98 #define RX_BUFFER_SIZE 1024
100 #define MAX_TX_URBS 16 /* must be power of 2 */
103 u8 len
; /* len is always the total message length in 32bit words */
116 struct version_reply_msg
{
133 __le32 id
; /* upper 3 bits contain flags */
142 u32 hnd
; /* opaque handle, not used by device */
143 __le32 id
; /* upper 3 bits contain flags */
152 u32 hnd
; /* opaque handle, not used by device */
156 struct id_filter_msg
{
161 __le32 mask
[ESD_MAX_ID_SEGMENT
+ 1];
164 struct set_baudrate_msg
{
172 /* Main message type used between library and application */
173 struct __attribute__ ((packed
)) esd_usb2_msg
{
175 struct header_msg hdr
;
176 struct version_msg version
;
177 struct version_reply_msg version_reply
;
180 struct tx_done_msg txdone
;
181 struct set_baudrate_msg setbaud
;
182 struct id_filter_msg filter
;
186 static struct usb_device_id esd_usb2_table
[] = {
187 {USB_DEVICE(USB_ESDGMBH_VENDOR_ID
, USB_CANUSB2_PRODUCT_ID
)},
188 {USB_DEVICE(USB_ESDGMBH_VENDOR_ID
, USB_CANUSBM_PRODUCT_ID
)},
191 MODULE_DEVICE_TABLE(usb
, esd_usb2_table
);
193 struct esd_usb2_net_priv
;
195 struct esd_tx_urb_context
{
196 struct esd_usb2_net_priv
*priv
;
202 struct usb_device
*udev
;
203 struct esd_usb2_net_priv
*nets
[ESD_USB2_MAX_NETS
];
205 struct usb_anchor rx_submitted
;
212 struct esd_usb2_net_priv
{
213 struct can_priv can
; /* must be the first member */
215 atomic_t active_tx_jobs
;
216 struct usb_anchor tx_submitted
;
217 struct esd_tx_urb_context tx_contexts
[MAX_TX_URBS
];
219 struct esd_usb2
*usb2
;
220 struct net_device
*netdev
;
223 struct can_berr_counter bec
;
226 static void esd_usb2_rx_event(struct esd_usb2_net_priv
*priv
,
227 struct esd_usb2_msg
*msg
)
229 struct net_device_stats
*stats
= &priv
->netdev
->stats
;
230 struct can_frame
*cf
;
232 u32 id
= le32_to_cpu(msg
->msg
.rx
.id
) & ESD_IDMASK
;
234 if (id
== ESD_EV_CAN_ERROR_EXT
) {
235 u8 state
= msg
->msg
.rx
.data
[0];
236 u8 ecc
= msg
->msg
.rx
.data
[1];
237 u8 txerr
= msg
->msg
.rx
.data
[2];
238 u8 rxerr
= msg
->msg
.rx
.data
[3];
240 skb
= alloc_can_err_skb(priv
->netdev
, &cf
);
246 if (state
!= priv
->old_state
) {
247 priv
->old_state
= state
;
249 switch (state
& ESD_BUSSTATE_MASK
) {
250 case ESD_BUSSTATE_BUSOFF
:
251 priv
->can
.state
= CAN_STATE_BUS_OFF
;
252 cf
->can_id
|= CAN_ERR_BUSOFF
;
253 priv
->can
.can_stats
.bus_off
++;
254 can_bus_off(priv
->netdev
);
256 case ESD_BUSSTATE_WARN
:
257 priv
->can
.state
= CAN_STATE_ERROR_WARNING
;
258 priv
->can
.can_stats
.error_warning
++;
260 case ESD_BUSSTATE_ERRPASSIVE
:
261 priv
->can
.state
= CAN_STATE_ERROR_PASSIVE
;
262 priv
->can
.can_stats
.error_passive
++;
265 priv
->can
.state
= CAN_STATE_ERROR_ACTIVE
;
269 priv
->can
.can_stats
.bus_error
++;
272 cf
->can_id
|= CAN_ERR_PROT
| CAN_ERR_BUSERROR
;
274 switch (ecc
& SJA1000_ECC_MASK
) {
275 case SJA1000_ECC_BIT
:
276 cf
->data
[2] |= CAN_ERR_PROT_BIT
;
278 case SJA1000_ECC_FORM
:
279 cf
->data
[2] |= CAN_ERR_PROT_FORM
;
281 case SJA1000_ECC_STUFF
:
282 cf
->data
[2] |= CAN_ERR_PROT_STUFF
;
285 cf
->data
[3] = ecc
& SJA1000_ECC_SEG
;
289 /* Error occurred during transmission? */
290 if (!(ecc
& SJA1000_ECC_DIR
))
291 cf
->data
[2] |= CAN_ERR_PROT_TX
;
293 if (priv
->can
.state
== CAN_STATE_ERROR_WARNING
||
294 priv
->can
.state
== CAN_STATE_ERROR_PASSIVE
) {
295 cf
->data
[1] = (txerr
> rxerr
) ?
296 CAN_ERR_CRTL_TX_PASSIVE
:
297 CAN_ERR_CRTL_RX_PASSIVE
;
303 priv
->bec
.txerr
= txerr
;
304 priv
->bec
.rxerr
= rxerr
;
307 stats
->rx_bytes
+= cf
->can_dlc
;
312 static void esd_usb2_rx_can_msg(struct esd_usb2_net_priv
*priv
,
313 struct esd_usb2_msg
*msg
)
315 struct net_device_stats
*stats
= &priv
->netdev
->stats
;
316 struct can_frame
*cf
;
321 if (!netif_device_present(priv
->netdev
))
324 id
= le32_to_cpu(msg
->msg
.rx
.id
);
326 if (id
& ESD_EVENT
) {
327 esd_usb2_rx_event(priv
, msg
);
329 skb
= alloc_can_skb(priv
->netdev
, &cf
);
335 cf
->can_id
= id
& ESD_IDMASK
;
336 cf
->can_dlc
= get_can_dlc(msg
->msg
.rx
.dlc
& ~ESD_RTR
);
339 cf
->can_id
|= CAN_EFF_FLAG
;
341 if (msg
->msg
.rx
.dlc
& ESD_RTR
) {
342 cf
->can_id
|= CAN_RTR_FLAG
;
344 for (i
= 0; i
< cf
->can_dlc
; i
++)
345 cf
->data
[i
] = msg
->msg
.rx
.data
[i
];
349 stats
->rx_bytes
+= cf
->can_dlc
;
356 static void esd_usb2_tx_done_msg(struct esd_usb2_net_priv
*priv
,
357 struct esd_usb2_msg
*msg
)
359 struct net_device_stats
*stats
= &priv
->netdev
->stats
;
360 struct net_device
*netdev
= priv
->netdev
;
361 struct esd_tx_urb_context
*context
;
363 if (!netif_device_present(netdev
))
366 context
= &priv
->tx_contexts
[msg
->msg
.txdone
.hnd
& (MAX_TX_URBS
- 1)];
368 if (!msg
->msg
.txdone
.status
) {
370 stats
->tx_bytes
+= context
->dlc
;
371 can_get_echo_skb(netdev
, context
->echo_index
);
374 can_free_echo_skb(netdev
, context
->echo_index
);
377 /* Release context */
378 context
->echo_index
= MAX_TX_URBS
;
379 atomic_dec(&priv
->active_tx_jobs
);
381 netif_wake_queue(netdev
);
384 static void esd_usb2_read_bulk_callback(struct urb
*urb
)
386 struct esd_usb2
*dev
= urb
->context
;
391 switch (urb
->status
) {
392 case 0: /* success */
402 dev_info(dev
->udev
->dev
.parent
,
403 "Rx URB aborted (%d)\n", urb
->status
);
407 while (pos
< urb
->actual_length
) {
408 struct esd_usb2_msg
*msg
;
410 msg
= (struct esd_usb2_msg
*)(urb
->transfer_buffer
+ pos
);
412 switch (msg
->msg
.hdr
.cmd
) {
414 if (msg
->msg
.rx
.net
>= dev
->net_count
) {
415 dev_err(dev
->udev
->dev
.parent
, "format error\n");
419 esd_usb2_rx_can_msg(dev
->nets
[msg
->msg
.rx
.net
], msg
);
423 if (msg
->msg
.txdone
.net
>= dev
->net_count
) {
424 dev_err(dev
->udev
->dev
.parent
, "format error\n");
428 esd_usb2_tx_done_msg(dev
->nets
[msg
->msg
.txdone
.net
],
433 pos
+= msg
->msg
.hdr
.len
<< 2;
435 if (pos
> urb
->actual_length
) {
436 dev_err(dev
->udev
->dev
.parent
, "format error\n");
442 usb_fill_bulk_urb(urb
, dev
->udev
, usb_rcvbulkpipe(dev
->udev
, 1),
443 urb
->transfer_buffer
, RX_BUFFER_SIZE
,
444 esd_usb2_read_bulk_callback
, dev
);
446 retval
= usb_submit_urb(urb
, GFP_ATOMIC
);
447 if (retval
== -ENODEV
) {
448 for (i
= 0; i
< dev
->net_count
; i
++) {
450 netif_device_detach(dev
->nets
[i
]->netdev
);
453 dev_err(dev
->udev
->dev
.parent
,
454 "failed resubmitting read bulk urb: %d\n", retval
);
461 * callback for bulk IN urb
463 static void esd_usb2_write_bulk_callback(struct urb
*urb
)
465 struct esd_tx_urb_context
*context
= urb
->context
;
466 struct esd_usb2_net_priv
*priv
;
467 struct net_device
*netdev
;
468 size_t size
= sizeof(struct esd_usb2_msg
);
472 priv
= context
->priv
;
473 netdev
= priv
->netdev
;
475 /* free up our allocated buffer */
476 usb_free_coherent(urb
->dev
, size
,
477 urb
->transfer_buffer
, urb
->transfer_dma
);
479 if (!netif_device_present(netdev
))
483 netdev_info(netdev
, "Tx URB aborted (%d)\n", urb
->status
);
485 netif_trans_update(netdev
);
488 static ssize_t
show_firmware(struct device
*d
,
489 struct device_attribute
*attr
, char *buf
)
491 struct usb_interface
*intf
= to_usb_interface(d
);
492 struct esd_usb2
*dev
= usb_get_intfdata(intf
);
494 return sprintf(buf
, "%d.%d.%d\n",
495 (dev
->version
>> 12) & 0xf,
496 (dev
->version
>> 8) & 0xf,
497 dev
->version
& 0xff);
499 static DEVICE_ATTR(firmware
, 0444, show_firmware
, NULL
);
501 static ssize_t
show_hardware(struct device
*d
,
502 struct device_attribute
*attr
, char *buf
)
504 struct usb_interface
*intf
= to_usb_interface(d
);
505 struct esd_usb2
*dev
= usb_get_intfdata(intf
);
507 return sprintf(buf
, "%d.%d.%d\n",
508 (dev
->version
>> 28) & 0xf,
509 (dev
->version
>> 24) & 0xf,
510 (dev
->version
>> 16) & 0xff);
512 static DEVICE_ATTR(hardware
, 0444, show_hardware
, NULL
);
514 static ssize_t
show_nets(struct device
*d
,
515 struct device_attribute
*attr
, char *buf
)
517 struct usb_interface
*intf
= to_usb_interface(d
);
518 struct esd_usb2
*dev
= usb_get_intfdata(intf
);
520 return sprintf(buf
, "%d", dev
->net_count
);
522 static DEVICE_ATTR(nets
, 0444, show_nets
, NULL
);
524 static int esd_usb2_send_msg(struct esd_usb2
*dev
, struct esd_usb2_msg
*msg
)
528 return usb_bulk_msg(dev
->udev
,
529 usb_sndbulkpipe(dev
->udev
, 2),
531 msg
->msg
.hdr
.len
<< 2,
536 static int esd_usb2_wait_msg(struct esd_usb2
*dev
,
537 struct esd_usb2_msg
*msg
)
541 return usb_bulk_msg(dev
->udev
,
542 usb_rcvbulkpipe(dev
->udev
, 1),
549 static int esd_usb2_setup_rx_urbs(struct esd_usb2
*dev
)
556 for (i
= 0; i
< MAX_RX_URBS
; i
++) {
557 struct urb
*urb
= NULL
;
560 /* create a URB, and a buffer for it */
561 urb
= usb_alloc_urb(0, GFP_KERNEL
);
567 buf
= usb_alloc_coherent(dev
->udev
, RX_BUFFER_SIZE
, GFP_KERNEL
,
570 dev_warn(dev
->udev
->dev
.parent
,
571 "No memory left for USB buffer\n");
576 usb_fill_bulk_urb(urb
, dev
->udev
,
577 usb_rcvbulkpipe(dev
->udev
, 1),
579 esd_usb2_read_bulk_callback
, dev
);
580 urb
->transfer_flags
|= URB_NO_TRANSFER_DMA_MAP
;
581 usb_anchor_urb(urb
, &dev
->rx_submitted
);
583 err
= usb_submit_urb(urb
, GFP_KERNEL
);
585 usb_unanchor_urb(urb
);
586 usb_free_coherent(dev
->udev
, RX_BUFFER_SIZE
, buf
,
591 /* Drop reference, USB core will take care of freeing it */
597 /* Did we submit any URBs */
599 dev_err(dev
->udev
->dev
.parent
, "couldn't setup read URBs\n");
603 /* Warn if we've couldn't transmit all the URBs */
604 if (i
< MAX_RX_URBS
) {
605 dev_warn(dev
->udev
->dev
.parent
,
606 "rx performance may be slow\n");
616 static int esd_usb2_start(struct esd_usb2_net_priv
*priv
)
618 struct esd_usb2
*dev
= priv
->usb2
;
619 struct net_device
*netdev
= priv
->netdev
;
620 struct esd_usb2_msg
*msg
;
623 msg
= kmalloc(sizeof(*msg
), GFP_KERNEL
);
631 * The IDADD message takes up to 64 32 bit bitmasks (2048 bits).
632 * Each bit represents one 11 bit CAN identifier. A set bit
633 * enables reception of the corresponding CAN identifier. A cleared
634 * bit disabled this identifier. An additional bitmask value
635 * following the CAN 2.0A bits is used to enable reception of
636 * extended CAN frames. Only the LSB of this final mask is checked
637 * for the complete 29 bit ID range. The IDADD message also allows
638 * filter configuration for an ID subset. In this case you can add
639 * the number of the starting bitmask (0..64) to the filter.option
640 * field followed by only some bitmasks.
642 msg
->msg
.hdr
.cmd
= CMD_IDADD
;
643 msg
->msg
.hdr
.len
= 2 + ESD_MAX_ID_SEGMENT
;
644 msg
->msg
.filter
.net
= priv
->index
;
645 msg
->msg
.filter
.option
= ESD_ID_ENABLE
; /* start with segment 0 */
646 for (i
= 0; i
< ESD_MAX_ID_SEGMENT
; i
++)
647 msg
->msg
.filter
.mask
[i
] = cpu_to_le32(0xffffffff);
648 /* enable 29bit extended IDs */
649 msg
->msg
.filter
.mask
[ESD_MAX_ID_SEGMENT
] = cpu_to_le32(0x00000001);
651 err
= esd_usb2_send_msg(dev
, msg
);
655 err
= esd_usb2_setup_rx_urbs(dev
);
659 priv
->can
.state
= CAN_STATE_ERROR_ACTIVE
;
663 netif_device_detach(netdev
);
665 netdev_err(netdev
, "couldn't start device: %d\n", err
);
671 static void unlink_all_urbs(struct esd_usb2
*dev
)
673 struct esd_usb2_net_priv
*priv
;
676 usb_kill_anchored_urbs(&dev
->rx_submitted
);
677 for (i
= 0; i
< dev
->net_count
; i
++) {
680 usb_kill_anchored_urbs(&priv
->tx_submitted
);
681 atomic_set(&priv
->active_tx_jobs
, 0);
683 for (j
= 0; j
< MAX_TX_URBS
; j
++)
684 priv
->tx_contexts
[j
].echo_index
= MAX_TX_URBS
;
689 static int esd_usb2_open(struct net_device
*netdev
)
691 struct esd_usb2_net_priv
*priv
= netdev_priv(netdev
);
695 err
= open_candev(netdev
);
699 /* finally start device */
700 err
= esd_usb2_start(priv
);
702 netdev_warn(netdev
, "couldn't start device: %d\n", err
);
703 close_candev(netdev
);
707 netif_start_queue(netdev
);
712 static netdev_tx_t
esd_usb2_start_xmit(struct sk_buff
*skb
,
713 struct net_device
*netdev
)
715 struct esd_usb2_net_priv
*priv
= netdev_priv(netdev
);
716 struct esd_usb2
*dev
= priv
->usb2
;
717 struct esd_tx_urb_context
*context
= NULL
;
718 struct net_device_stats
*stats
= &netdev
->stats
;
719 struct can_frame
*cf
= (struct can_frame
*)skb
->data
;
720 struct esd_usb2_msg
*msg
;
724 int ret
= NETDEV_TX_OK
;
725 size_t size
= sizeof(struct esd_usb2_msg
);
727 if (can_dropped_invalid_skb(netdev
, skb
))
730 /* create a URB, and a buffer for it, and copy the data to the URB */
731 urb
= usb_alloc_urb(0, GFP_ATOMIC
);
738 buf
= usb_alloc_coherent(dev
->udev
, size
, GFP_ATOMIC
,
741 netdev_err(netdev
, "No memory left for USB buffer\n");
747 msg
= (struct esd_usb2_msg
*)buf
;
749 msg
->msg
.hdr
.len
= 3; /* minimal length */
750 msg
->msg
.hdr
.cmd
= CMD_CAN_TX
;
751 msg
->msg
.tx
.net
= priv
->index
;
752 msg
->msg
.tx
.dlc
= cf
->can_dlc
;
753 msg
->msg
.tx
.id
= cpu_to_le32(cf
->can_id
& CAN_ERR_MASK
);
755 if (cf
->can_id
& CAN_RTR_FLAG
)
756 msg
->msg
.tx
.dlc
|= ESD_RTR
;
758 if (cf
->can_id
& CAN_EFF_FLAG
)
759 msg
->msg
.tx
.id
|= cpu_to_le32(ESD_EXTID
);
761 for (i
= 0; i
< cf
->can_dlc
; i
++)
762 msg
->msg
.tx
.data
[i
] = cf
->data
[i
];
764 msg
->msg
.hdr
.len
+= (cf
->can_dlc
+ 3) >> 2;
766 for (i
= 0; i
< MAX_TX_URBS
; i
++) {
767 if (priv
->tx_contexts
[i
].echo_index
== MAX_TX_URBS
) {
768 context
= &priv
->tx_contexts
[i
];
774 * This may never happen.
777 netdev_warn(netdev
, "couldn't find free context\n");
778 ret
= NETDEV_TX_BUSY
;
782 context
->priv
= priv
;
783 context
->echo_index
= i
;
784 context
->dlc
= cf
->can_dlc
;
786 /* hnd must not be 0 - MSB is stripped in txdone handling */
787 msg
->msg
.tx
.hnd
= 0x80000000 | i
; /* returned in TX done message */
789 usb_fill_bulk_urb(urb
, dev
->udev
, usb_sndbulkpipe(dev
->udev
, 2), buf
,
790 msg
->msg
.hdr
.len
<< 2,
791 esd_usb2_write_bulk_callback
, context
);
793 urb
->transfer_flags
|= URB_NO_TRANSFER_DMA_MAP
;
795 usb_anchor_urb(urb
, &priv
->tx_submitted
);
797 can_put_echo_skb(skb
, netdev
, context
->echo_index
);
799 atomic_inc(&priv
->active_tx_jobs
);
801 /* Slow down tx path */
802 if (atomic_read(&priv
->active_tx_jobs
) >= MAX_TX_URBS
)
803 netif_stop_queue(netdev
);
805 err
= usb_submit_urb(urb
, GFP_ATOMIC
);
807 can_free_echo_skb(netdev
, context
->echo_index
);
809 atomic_dec(&priv
->active_tx_jobs
);
810 usb_unanchor_urb(urb
);
815 netif_device_detach(netdev
);
817 netdev_warn(netdev
, "failed tx_urb %d\n", err
);
822 netif_trans_update(netdev
);
825 * Release our reference to this URB, the USB core will eventually free
833 usb_free_coherent(dev
->udev
, size
, buf
, urb
->transfer_dma
);
842 static int esd_usb2_close(struct net_device
*netdev
)
844 struct esd_usb2_net_priv
*priv
= netdev_priv(netdev
);
845 struct esd_usb2_msg
*msg
;
848 msg
= kmalloc(sizeof(*msg
), GFP_KERNEL
);
852 /* Disable all IDs (see esd_usb2_start()) */
853 msg
->msg
.hdr
.cmd
= CMD_IDADD
;
854 msg
->msg
.hdr
.len
= 2 + ESD_MAX_ID_SEGMENT
;
855 msg
->msg
.filter
.net
= priv
->index
;
856 msg
->msg
.filter
.option
= ESD_ID_ENABLE
; /* start with segment 0 */
857 for (i
= 0; i
<= ESD_MAX_ID_SEGMENT
; i
++)
858 msg
->msg
.filter
.mask
[i
] = 0;
859 if (esd_usb2_send_msg(priv
->usb2
, msg
) < 0)
860 netdev_err(netdev
, "sending idadd message failed\n");
862 /* set CAN controller to reset mode */
863 msg
->msg
.hdr
.len
= 2;
864 msg
->msg
.hdr
.cmd
= CMD_SETBAUD
;
865 msg
->msg
.setbaud
.net
= priv
->index
;
866 msg
->msg
.setbaud
.rsvd
= 0;
867 msg
->msg
.setbaud
.baud
= cpu_to_le32(ESD_USB2_NO_BAUDRATE
);
868 if (esd_usb2_send_msg(priv
->usb2
, msg
) < 0)
869 netdev_err(netdev
, "sending setbaud message failed\n");
871 priv
->can
.state
= CAN_STATE_STOPPED
;
873 netif_stop_queue(netdev
);
875 close_candev(netdev
);
882 static const struct net_device_ops esd_usb2_netdev_ops
= {
883 .ndo_open
= esd_usb2_open
,
884 .ndo_stop
= esd_usb2_close
,
885 .ndo_start_xmit
= esd_usb2_start_xmit
,
886 .ndo_change_mtu
= can_change_mtu
,
889 static const struct can_bittiming_const esd_usb2_bittiming_const
= {
891 .tseg1_min
= ESD_USB2_TSEG1_MIN
,
892 .tseg1_max
= ESD_USB2_TSEG1_MAX
,
893 .tseg2_min
= ESD_USB2_TSEG2_MIN
,
894 .tseg2_max
= ESD_USB2_TSEG2_MAX
,
895 .sjw_max
= ESD_USB2_SJW_MAX
,
896 .brp_min
= ESD_USB2_BRP_MIN
,
897 .brp_max
= ESD_USB2_BRP_MAX
,
898 .brp_inc
= ESD_USB2_BRP_INC
,
901 static int esd_usb2_set_bittiming(struct net_device
*netdev
)
903 struct esd_usb2_net_priv
*priv
= netdev_priv(netdev
);
904 struct can_bittiming
*bt
= &priv
->can
.bittiming
;
905 struct esd_usb2_msg
*msg
;
910 canbtr
= ESD_USB2_UBR
;
911 if (priv
->can
.ctrlmode
& CAN_CTRLMODE_LISTENONLY
)
912 canbtr
|= ESD_USB2_LOM
;
914 canbtr
|= (bt
->brp
- 1) & (ESD_USB2_BRP_MAX
- 1);
916 if (le16_to_cpu(priv
->usb2
->udev
->descriptor
.idProduct
) ==
917 USB_CANUSBM_PRODUCT_ID
)
918 sjw_shift
= ESD_USBM_SJW_SHIFT
;
920 sjw_shift
= ESD_USB2_SJW_SHIFT
;
922 canbtr
|= ((bt
->sjw
- 1) & (ESD_USB2_SJW_MAX
- 1))
924 canbtr
|= ((bt
->prop_seg
+ bt
->phase_seg1
- 1)
925 & (ESD_USB2_TSEG1_MAX
- 1))
926 << ESD_USB2_TSEG1_SHIFT
;
927 canbtr
|= ((bt
->phase_seg2
- 1) & (ESD_USB2_TSEG2_MAX
- 1))
928 << ESD_USB2_TSEG2_SHIFT
;
929 if (priv
->can
.ctrlmode
& CAN_CTRLMODE_3_SAMPLES
)
930 canbtr
|= ESD_USB2_3_SAMPLES
;
932 msg
= kmalloc(sizeof(*msg
), GFP_KERNEL
);
936 msg
->msg
.hdr
.len
= 2;
937 msg
->msg
.hdr
.cmd
= CMD_SETBAUD
;
938 msg
->msg
.setbaud
.net
= priv
->index
;
939 msg
->msg
.setbaud
.rsvd
= 0;
940 msg
->msg
.setbaud
.baud
= cpu_to_le32(canbtr
);
942 netdev_info(netdev
, "setting BTR=%#x\n", canbtr
);
944 err
= esd_usb2_send_msg(priv
->usb2
, msg
);
950 static int esd_usb2_get_berr_counter(const struct net_device
*netdev
,
951 struct can_berr_counter
*bec
)
953 struct esd_usb2_net_priv
*priv
= netdev_priv(netdev
);
955 bec
->txerr
= priv
->bec
.txerr
;
956 bec
->rxerr
= priv
->bec
.rxerr
;
961 static int esd_usb2_set_mode(struct net_device
*netdev
, enum can_mode mode
)
965 netif_wake_queue(netdev
);
975 static int esd_usb2_probe_one_net(struct usb_interface
*intf
, int index
)
977 struct esd_usb2
*dev
= usb_get_intfdata(intf
);
978 struct net_device
*netdev
;
979 struct esd_usb2_net_priv
*priv
;
983 netdev
= alloc_candev(sizeof(*priv
), MAX_TX_URBS
);
985 dev_err(&intf
->dev
, "couldn't alloc candev\n");
990 priv
= netdev_priv(netdev
);
992 init_usb_anchor(&priv
->tx_submitted
);
993 atomic_set(&priv
->active_tx_jobs
, 0);
995 for (i
= 0; i
< MAX_TX_URBS
; i
++)
996 priv
->tx_contexts
[i
].echo_index
= MAX_TX_URBS
;
999 priv
->netdev
= netdev
;
1000 priv
->index
= index
;
1002 priv
->can
.state
= CAN_STATE_STOPPED
;
1003 priv
->can
.ctrlmode_supported
= CAN_CTRLMODE_LISTENONLY
;
1005 if (le16_to_cpu(dev
->udev
->descriptor
.idProduct
) ==
1006 USB_CANUSBM_PRODUCT_ID
)
1007 priv
->can
.clock
.freq
= ESD_USBM_CAN_CLOCK
;
1009 priv
->can
.clock
.freq
= ESD_USB2_CAN_CLOCK
;
1010 priv
->can
.ctrlmode_supported
|= CAN_CTRLMODE_3_SAMPLES
;
1013 priv
->can
.bittiming_const
= &esd_usb2_bittiming_const
;
1014 priv
->can
.do_set_bittiming
= esd_usb2_set_bittiming
;
1015 priv
->can
.do_set_mode
= esd_usb2_set_mode
;
1016 priv
->can
.do_get_berr_counter
= esd_usb2_get_berr_counter
;
1018 netdev
->flags
|= IFF_ECHO
; /* we support local echo */
1020 netdev
->netdev_ops
= &esd_usb2_netdev_ops
;
1022 SET_NETDEV_DEV(netdev
, &intf
->dev
);
1023 netdev
->dev_id
= index
;
1025 err
= register_candev(netdev
);
1027 dev_err(&intf
->dev
, "couldn't register CAN device: %d\n", err
);
1028 free_candev(netdev
);
1033 dev
->nets
[index
] = priv
;
1034 netdev_info(netdev
, "device %s registered\n", netdev
->name
);
1041 * probe function for new USB2 devices
1043 * check version information and number of available
1046 static int esd_usb2_probe(struct usb_interface
*intf
,
1047 const struct usb_device_id
*id
)
1049 struct esd_usb2
*dev
;
1050 struct esd_usb2_msg
*msg
;
1053 dev
= kzalloc(sizeof(*dev
), GFP_KERNEL
);
1059 dev
->udev
= interface_to_usbdev(intf
);
1061 init_usb_anchor(&dev
->rx_submitted
);
1063 usb_set_intfdata(intf
, dev
);
1065 msg
= kmalloc(sizeof(*msg
), GFP_KERNEL
);
1071 /* query number of CAN interfaces (nets) */
1072 msg
->msg
.hdr
.cmd
= CMD_VERSION
;
1073 msg
->msg
.hdr
.len
= 2;
1074 msg
->msg
.version
.rsvd
= 0;
1075 msg
->msg
.version
.flags
= 0;
1076 msg
->msg
.version
.drv_version
= 0;
1078 err
= esd_usb2_send_msg(dev
, msg
);
1080 dev_err(&intf
->dev
, "sending version message failed\n");
1084 err
= esd_usb2_wait_msg(dev
, msg
);
1086 dev_err(&intf
->dev
, "no version message answer\n");
1090 dev
->net_count
= (int)msg
->msg
.version_reply
.nets
;
1091 dev
->version
= le32_to_cpu(msg
->msg
.version_reply
.version
);
1093 if (device_create_file(&intf
->dev
, &dev_attr_firmware
))
1095 "Couldn't create device file for firmware\n");
1097 if (device_create_file(&intf
->dev
, &dev_attr_hardware
))
1099 "Couldn't create device file for hardware\n");
1101 if (device_create_file(&intf
->dev
, &dev_attr_nets
))
1103 "Couldn't create device file for nets\n");
1105 /* do per device probing */
1106 for (i
= 0; i
< dev
->net_count
; i
++)
1107 esd_usb2_probe_one_net(intf
, i
);
1118 * called by the usb core when the device is removed from the system
1120 static void esd_usb2_disconnect(struct usb_interface
*intf
)
1122 struct esd_usb2
*dev
= usb_get_intfdata(intf
);
1123 struct net_device
*netdev
;
1126 device_remove_file(&intf
->dev
, &dev_attr_firmware
);
1127 device_remove_file(&intf
->dev
, &dev_attr_hardware
);
1128 device_remove_file(&intf
->dev
, &dev_attr_nets
);
1130 usb_set_intfdata(intf
, NULL
);
1133 for (i
= 0; i
< dev
->net_count
; i
++) {
1135 netdev
= dev
->nets
[i
]->netdev
;
1136 unregister_netdev(netdev
);
1137 free_candev(netdev
);
1140 unlink_all_urbs(dev
);
1145 /* usb specific object needed to register this driver with the usb subsystem */
1146 static struct usb_driver esd_usb2_driver
= {
1148 .probe
= esd_usb2_probe
,
1149 .disconnect
= esd_usb2_disconnect
,
1150 .id_table
= esd_usb2_table
,
1153 module_usb_driver(esd_usb2_driver
);