?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Linux 4.19.133
[linux/fpc-iii.git] / drivers / net / hamradio / yam.c
blobfdab498725878d8cca254960f601c2d74e87d63b
1 /*****************************************************************************/
2
3 /*
4 * yam.c -- YAM radio modem driver.
5 *
6 * Copyright (C) 1998 Frederic Rible F1OAT (frible@teaser.fr)
7 * Adapted from baycom.c driver written by Thomas Sailer (sailer@ife.ee.ethz.ch)
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22 *
23 * Please note that the GPL allows you to use the driver, NOT the radio.
24 * In order to use the radio, you need a license from the communications
25 * authority of your country.
26 *
27 *
28 * History:
29 * 0.0 F1OAT 06.06.98 Begin of work with baycom.c source code V 0.3
30 * 0.1 F1OAT 07.06.98 Add timer polling routine for channel arbitration
31 * 0.2 F6FBB 08.06.98 Added delay after FPGA programming
32 * 0.3 F6FBB 29.07.98 Delayed PTT implementation for dupmode=2
33 * 0.4 F6FBB 30.07.98 Added TxTail, Slottime and Persistence
34 * 0.5 F6FBB 01.08.98 Shared IRQs, /proc/net and network statistics
35 * 0.6 F6FBB 25.08.98 Added 1200Bds format
36 * 0.7 F6FBB 12.09.98 Added to the kernel configuration
37 * 0.8 F6FBB 14.10.98 Fixed slottime/persistence timing bug
38 * OK1ZIA 2.09.01 Fixed "kfree_skb on hard IRQ"
39 * using dev_kfree_skb_any(). (important in 2.4 kernel)
40 *
41 */
42
43 /*****************************************************************************/
44
45 #include <linux/module.h>
46 #include <linux/types.h>
47 #include <linux/net.h>
48 #include <linux/in.h>
49 #include <linux/if.h>
50 #include <linux/slab.h>
51 #include <linux/errno.h>
52 #include <linux/bitops.h>
53 #include <linux/random.h>
54 #include <asm/io.h>
55 #include <linux/interrupt.h>
56 #include <linux/ioport.h>
57 #include <linux/firmware.h>
58 #include <linux/platform_device.h>
59
60 #include <linux/netdevice.h>
61 #include <linux/if_arp.h>
62 #include <linux/etherdevice.h>
63 #include <linux/skbuff.h>
64 #include <net/ax25.h>
65
66 #include <linux/kernel.h>
67 #include <linux/proc_fs.h>
68 #include <linux/seq_file.h>
69 #include <net/net_namespace.h>
70
71 #include <linux/uaccess.h>
72 #include <linux/init.h>
73
74 #include <linux/yam.h>
75
76 /* --------------------------------------------------------------------- */
77
78 static const char yam_drvname[] = "yam";
79 static const char yam_drvinfo[] __initconst = KERN_INFO \
80 "YAM driver version 0.8 by F1OAT/F6FBB\n";
81
82 /* --------------------------------------------------------------------- */
83
84 #define FIRMWARE_9600 "yam/9600.bin"
85 #define FIRMWARE_1200 "yam/1200.bin"
86
87 #define YAM_9600 1
88 #define YAM_1200 2
89
90 #define NR_PORTS 4
91 #define YAM_MAGIC 0xF10A7654
92
93 /* Transmitter states */
94
95 #define TX_OFF 0
96 #define TX_HEAD 1
97 #define TX_DATA 2
98 #define TX_CRC1 3
99 #define TX_CRC2 4
100 #define TX_TAIL 5
101
102 #define YAM_MAX_FRAME 1024
103
104 #define DEFAULT_BITRATE 9600 /* bps */
105 #define DEFAULT_HOLDD 10 /* sec */
106 #define DEFAULT_TXD 300 /* ms */
107 #define DEFAULT_TXTAIL 10 /* ms */
108 #define DEFAULT_SLOT 100 /* ms */
109 #define DEFAULT_PERS 64 /* 0->255 */
110
111 struct yam_port {
112 int magic;
113 int bitrate;
114 int baudrate;
115 int iobase;
116 int irq;
117 int dupmode;
118
119 struct net_device *dev;
120
121 int nb_rxint;
122 int nb_mdint;
123
124 /* Parameters section */
125
126 int txd; /* tx delay */
127 int holdd; /* duplex ptt delay */
128 int txtail; /* txtail delay */
129 int slot; /* slottime */
130 int pers; /* persistence */
131
132 /* Tx section */
133
134 int tx_state;
135 int tx_count;
136 int slotcnt;
137 unsigned char tx_buf[YAM_MAX_FRAME];
138 int tx_len;
139 int tx_crcl, tx_crch;
140 struct sk_buff_head send_queue; /* Packets awaiting transmission */
141
142 /* Rx section */
143
144 int dcd;
145 unsigned char rx_buf[YAM_MAX_FRAME];
146 int rx_len;
147 int rx_crcl, rx_crch;
148 };
149
150 struct yam_mcs {
151 unsigned char bits[YAM_FPGA_SIZE];
152 int bitrate;
153 struct yam_mcs *next;
154 };
155
156 static struct net_device *yam_devs[NR_PORTS];
157
158 static struct yam_mcs *yam_data;
159
160 static DEFINE_TIMER(yam_timer, NULL);
161
162 /* --------------------------------------------------------------------- */
163
164 #define RBR(iobase) (iobase+0)
165 #define THR(iobase) (iobase+0)
166 #define IER(iobase) (iobase+1)
167 #define IIR(iobase) (iobase+2)
168 #define FCR(iobase) (iobase+2)
169 #define LCR(iobase) (iobase+3)
170 #define MCR(iobase) (iobase+4)
171 #define LSR(iobase) (iobase+5)
172 #define MSR(iobase) (iobase+6)
173 #define SCR(iobase) (iobase+7)
174 #define DLL(iobase) (iobase+0)
175 #define DLM(iobase) (iobase+1)
176
177 #define YAM_EXTENT 8
178
179 /* Interrupt Identification Register Bit Masks */
180 #define IIR_NOPEND 1
181 #define IIR_MSR 0
182 #define IIR_TX 2
183 #define IIR_RX 4
184 #define IIR_LSR 6
185 #define IIR_TIMEOUT 12 /* Fifo mode only */
186
187 #define IIR_MASK 0x0F
188
189 /* Interrupt Enable Register Bit Masks */
190 #define IER_RX 1 /* enable rx interrupt */
191 #define IER_TX 2 /* enable tx interrupt */
192 #define IER_LSR 4 /* enable line status interrupts */
193 #define IER_MSR 8 /* enable modem status interrupts */
194
195 /* Modem Control Register Bit Masks */
196 #define MCR_DTR 0x01 /* DTR output */
197 #define MCR_RTS 0x02 /* RTS output */
198 #define MCR_OUT1 0x04 /* OUT1 output (not accessible in RS232) */
199 #define MCR_OUT2 0x08 /* Master Interrupt enable (must be set on PCs) */
200 #define MCR_LOOP 0x10 /* Loopback enable */
201
202 /* Modem Status Register Bit Masks */
203 #define MSR_DCTS 0x01 /* Delta CTS input */
204 #define MSR_DDSR 0x02 /* Delta DSR */
205 #define MSR_DRIN 0x04 /* Delta RI */
206 #define MSR_DDCD 0x08 /* Delta DCD */
207 #define MSR_CTS 0x10 /* CTS input */
208 #define MSR_DSR 0x20 /* DSR input */
209 #define MSR_RING 0x40 /* RI input */
210 #define MSR_DCD 0x80 /* DCD input */
211
212 /* line status register bit mask */
213 #define LSR_RXC 0x01
214 #define LSR_OE 0x02
215 #define LSR_PE 0x04
216 #define LSR_FE 0x08
217 #define LSR_BREAK 0x10
218 #define LSR_THRE 0x20
219 #define LSR_TSRE 0x40
220
221 /* Line Control Register Bit Masks */
222 #define LCR_DLAB 0x80
223 #define LCR_BREAK 0x40
224 #define LCR_PZERO 0x28
225 #define LCR_PEVEN 0x18
226 #define LCR_PODD 0x08
227 #define LCR_STOP1 0x00
228 #define LCR_STOP2 0x04
229 #define LCR_BIT5 0x00
230 #define LCR_BIT6 0x02
231 #define LCR_BIT7 0x01
232 #define LCR_BIT8 0x03
233
234 /* YAM Modem <-> UART Port mapping */
235
236 #define TX_RDY MSR_DCTS /* transmitter ready to send */
237 #define RX_DCD MSR_DCD /* carrier detect */
238 #define RX_FLAG MSR_RING /* hdlc flag received */
239 #define FPGA_DONE MSR_DSR /* FPGA is configured */
240 #define PTT_ON (MCR_RTS|MCR_OUT2) /* activate PTT */
241 #define PTT_OFF (MCR_DTR|MCR_OUT2) /* release PTT */
242
243 #define ENABLE_RXINT IER_RX /* enable uart rx interrupt during rx */
244 #define ENABLE_TXINT IER_MSR /* enable uart ms interrupt during tx */
245 #define ENABLE_RTXINT (IER_RX|IER_MSR) /* full duplex operations */
246
247
248 /*************************************************************************
249 * CRC Tables
250 ************************************************************************/
251
252 static const unsigned char chktabl[256] =
253 {0x00, 0x89, 0x12, 0x9b, 0x24, 0xad, 0x36, 0xbf, 0x48, 0xc1, 0x5a, 0xd3, 0x6c, 0xe5, 0x7e,
254 0xf7, 0x81, 0x08, 0x93, 0x1a, 0xa5, 0x2c, 0xb7, 0x3e, 0xc9, 0x40, 0xdb, 0x52, 0xed, 0x64,
255 0xff, 0x76, 0x02, 0x8b, 0x10, 0x99, 0x26, 0xaf, 0x34, 0xbd, 0x4a, 0xc3, 0x58, 0xd1, 0x6e,
256 0xe7, 0x7c, 0xf5, 0x83, 0x0a, 0x91, 0x18, 0xa7, 0x2e, 0xb5, 0x3c, 0xcb, 0x42, 0xd9, 0x50,
257 0xef, 0x66, 0xfd, 0x74, 0x04, 0x8d, 0x16, 0x9f, 0x20, 0xa9, 0x32, 0xbb, 0x4c, 0xc5, 0x5e,
258 0xd7, 0x68, 0xe1, 0x7a, 0xf3, 0x85, 0x0c, 0x97, 0x1e, 0xa1, 0x28, 0xb3, 0x3a, 0xcd, 0x44,
259 0xdf, 0x56, 0xe9, 0x60, 0xfb, 0x72, 0x06, 0x8f, 0x14, 0x9d, 0x22, 0xab, 0x30, 0xb9, 0x4e,
260 0xc7, 0x5c, 0xd5, 0x6a, 0xe3, 0x78, 0xf1, 0x87, 0x0e, 0x95, 0x1c, 0xa3, 0x2a, 0xb1, 0x38,
261 0xcf, 0x46, 0xdd, 0x54, 0xeb, 0x62, 0xf9, 0x70, 0x08, 0x81, 0x1a, 0x93, 0x2c, 0xa5, 0x3e,
262 0xb7, 0x40, 0xc9, 0x52, 0xdb, 0x64, 0xed, 0x76, 0xff, 0x89, 0x00, 0x9b, 0x12, 0xad, 0x24,
263 0xbf, 0x36, 0xc1, 0x48, 0xd3, 0x5a, 0xe5, 0x6c, 0xf7, 0x7e, 0x0a, 0x83, 0x18, 0x91, 0x2e,
264 0xa7, 0x3c, 0xb5, 0x42, 0xcb, 0x50, 0xd9, 0x66, 0xef, 0x74, 0xfd, 0x8b, 0x02, 0x99, 0x10,
265 0xaf, 0x26, 0xbd, 0x34, 0xc3, 0x4a, 0xd1, 0x58, 0xe7, 0x6e, 0xf5, 0x7c, 0x0c, 0x85, 0x1e,
266 0x97, 0x28, 0xa1, 0x3a, 0xb3, 0x44, 0xcd, 0x56, 0xdf, 0x60, 0xe9, 0x72, 0xfb, 0x8d, 0x04,
267 0x9f, 0x16, 0xa9, 0x20, 0xbb, 0x32, 0xc5, 0x4c, 0xd7, 0x5e, 0xe1, 0x68, 0xf3, 0x7a, 0x0e,
268 0x87, 0x1c, 0x95, 0x2a, 0xa3, 0x38, 0xb1, 0x46, 0xcf, 0x54, 0xdd, 0x62, 0xeb, 0x70, 0xf9,
269 0x8f, 0x06, 0x9d, 0x14, 0xab, 0x22, 0xb9, 0x30, 0xc7, 0x4e, 0xd5, 0x5c, 0xe3, 0x6a, 0xf1,
270 0x78};
271 static const unsigned char chktabh[256] =
272 {0x00, 0x11, 0x23, 0x32, 0x46, 0x57, 0x65, 0x74, 0x8c, 0x9d, 0xaf, 0xbe, 0xca, 0xdb, 0xe9,
273 0xf8, 0x10, 0x01, 0x33, 0x22, 0x56, 0x47, 0x75, 0x64, 0x9c, 0x8d, 0xbf, 0xae, 0xda, 0xcb,
274 0xf9, 0xe8, 0x21, 0x30, 0x02, 0x13, 0x67, 0x76, 0x44, 0x55, 0xad, 0xbc, 0x8e, 0x9f, 0xeb,
275 0xfa, 0xc8, 0xd9, 0x31, 0x20, 0x12, 0x03, 0x77, 0x66, 0x54, 0x45, 0xbd, 0xac, 0x9e, 0x8f,
276 0xfb, 0xea, 0xd8, 0xc9, 0x42, 0x53, 0x61, 0x70, 0x04, 0x15, 0x27, 0x36, 0xce, 0xdf, 0xed,
277 0xfc, 0x88, 0x99, 0xab, 0xba, 0x52, 0x43, 0x71, 0x60, 0x14, 0x05, 0x37, 0x26, 0xde, 0xcf,
278 0xfd, 0xec, 0x98, 0x89, 0xbb, 0xaa, 0x63, 0x72, 0x40, 0x51, 0x25, 0x34, 0x06, 0x17, 0xef,
279 0xfe, 0xcc, 0xdd, 0xa9, 0xb8, 0x8a, 0x9b, 0x73, 0x62, 0x50, 0x41, 0x35, 0x24, 0x16, 0x07,
280 0xff, 0xee, 0xdc, 0xcd, 0xb9, 0xa8, 0x9a, 0x8b, 0x84, 0x95, 0xa7, 0xb6, 0xc2, 0xd3, 0xe1,
281 0xf0, 0x08, 0x19, 0x2b, 0x3a, 0x4e, 0x5f, 0x6d, 0x7c, 0x94, 0x85, 0xb7, 0xa6, 0xd2, 0xc3,
282 0xf1, 0xe0, 0x18, 0x09, 0x3b, 0x2a, 0x5e, 0x4f, 0x7d, 0x6c, 0xa5, 0xb4, 0x86, 0x97, 0xe3,
283 0xf2, 0xc0, 0xd1, 0x29, 0x38, 0x0a, 0x1b, 0x6f, 0x7e, 0x4c, 0x5d, 0xb5, 0xa4, 0x96, 0x87,
284 0xf3, 0xe2, 0xd0, 0xc1, 0x39, 0x28, 0x1a, 0x0b, 0x7f, 0x6e, 0x5c, 0x4d, 0xc6, 0xd7, 0xe5,
285 0xf4, 0x80, 0x91, 0xa3, 0xb2, 0x4a, 0x5b, 0x69, 0x78, 0x0c, 0x1d, 0x2f, 0x3e, 0xd6, 0xc7,
286 0xf5, 0xe4, 0x90, 0x81, 0xb3, 0xa2, 0x5a, 0x4b, 0x79, 0x68, 0x1c, 0x0d, 0x3f, 0x2e, 0xe7,
287 0xf6, 0xc4, 0xd5, 0xa1, 0xb0, 0x82, 0x93, 0x6b, 0x7a, 0x48, 0x59, 0x2d, 0x3c, 0x0e, 0x1f,
288 0xf7, 0xe6, 0xd4, 0xc5, 0xb1, 0xa0, 0x92, 0x83, 0x7b, 0x6a, 0x58, 0x49, 0x3d, 0x2c, 0x1e,
289 0x0f};
290
291 /*************************************************************************
292 * FPGA functions
293 ************************************************************************/
294
295 static void delay(int ms)
296 {
297 unsigned long timeout = jiffies + ((ms * HZ) / 1000);
298 while (time_before(jiffies, timeout))
299 cpu_relax();
300 }
301
302 /*
303 * reset FPGA
304 */
305
306 static void fpga_reset(int iobase)
307 {
308 outb(0, IER(iobase));
309 outb(LCR_DLAB | LCR_BIT5, LCR(iobase));
310 outb(1, DLL(iobase));
311 outb(0, DLM(iobase));
312
313 outb(LCR_BIT5, LCR(iobase));
314 inb(LSR(iobase));
315 inb(MSR(iobase));
316 /* turn off FPGA supply voltage */
317 outb(MCR_OUT1 | MCR_OUT2, MCR(iobase));
318 delay(100);
319 /* turn on FPGA supply voltage again */
320 outb(MCR_DTR | MCR_RTS | MCR_OUT1 | MCR_OUT2, MCR(iobase));
321 delay(100);
322 }
323
324 /*
325 * send one byte to FPGA
326 */
327
328 static int fpga_write(int iobase, unsigned char wrd)
329 {
330 unsigned char bit;
331 int k;
332 unsigned long timeout = jiffies + HZ / 10;
333
334 for (k = 0; k < 8; k++) {
335 bit = (wrd & 0x80) ? (MCR_RTS | MCR_DTR) : MCR_DTR;
336 outb(bit | MCR_OUT1 | MCR_OUT2, MCR(iobase));
337 wrd <<= 1;
338 outb(0xfc, THR(iobase));
339 while ((inb(LSR(iobase)) & LSR_TSRE) == 0)
340 if (time_after(jiffies, timeout))
341 return -1;
342 }
343
344 return 0;
345 }
346
347 /*
348 * predef should be 0 for loading user defined mcs
349 * predef should be YAM_1200 for loading predef 1200 mcs
350 * predef should be YAM_9600 for loading predef 9600 mcs
351 */
352 static unsigned char *add_mcs(unsigned char *bits, int bitrate,
353 unsigned int predef)
354 {
355 const char *fw_name[2] = {FIRMWARE_9600, FIRMWARE_1200};
356 const struct firmware *fw;
357 struct platform_device *pdev;
358 struct yam_mcs *p;
359 int err;
360
361 switch (predef) {
362 case 0:
363 fw = NULL;
364 break;
365 case YAM_1200:
366 case YAM_9600:
367 predef--;
368 pdev = platform_device_register_simple("yam", 0, NULL, 0);
369 if (IS_ERR(pdev)) {
370 printk(KERN_ERR "yam: Failed to register firmware\n");
371 return NULL;
372 }
373 err = request_firmware(&fw, fw_name[predef], &pdev->dev);
374 platform_device_unregister(pdev);
375 if (err) {
376 printk(KERN_ERR "Failed to load firmware \"%s\"\n",
377 fw_name[predef]);
378 return NULL;
379 }
380 if (fw->size != YAM_FPGA_SIZE) {
381 printk(KERN_ERR "Bogus length %zu in firmware \"%s\"\n",
382 fw->size, fw_name[predef]);
383 release_firmware(fw);
384 return NULL;
385 }
386 bits = (unsigned char *)fw->data;
387 break;
388 default:
389 printk(KERN_ERR "yam: Invalid predef number %u\n", predef);
390 return NULL;
391 }
392
393 /* If it already exists, replace the bit data */
394 p = yam_data;
395 while (p) {
396 if (p->bitrate == bitrate) {
397 memcpy(p->bits, bits, YAM_FPGA_SIZE);
398 goto out;
399 }
400 p = p->next;
401 }
402
403 /* Allocate a new mcs */
404 if ((p = kmalloc(sizeof(struct yam_mcs), GFP_KERNEL)) == NULL) {
405 release_firmware(fw);
406 return NULL;
407 }
408 memcpy(p->bits, bits, YAM_FPGA_SIZE);
409 p->bitrate = bitrate;
410 p->next = yam_data;
411 yam_data = p;
412 out:
413 release_firmware(fw);
414 return p->bits;
415 }
416
417 static unsigned char *get_mcs(int bitrate)
418 {
419 struct yam_mcs *p;
420
421 p = yam_data;
422 while (p) {
423 if (p->bitrate == bitrate)
424 return p->bits;
425 p = p->next;
426 }
427
428 /* Load predefined mcs data */
429 switch (bitrate) {
430 case 1200:
431 /* setting predef as YAM_1200 for loading predef 1200 mcs */
432 return add_mcs(NULL, bitrate, YAM_1200);
433 default:
434 /* setting predef as YAM_9600 for loading predef 9600 mcs */
435 return add_mcs(NULL, bitrate, YAM_9600);
436 }
437 }
438
439 /*
440 * download bitstream to FPGA
441 * data is contained in bits[] array in yam1200.h resp. yam9600.h
442 */
443
444 static int fpga_download(int iobase, int bitrate)
445 {
446 int i, rc;
447 unsigned char *pbits;
448
449 pbits = get_mcs(bitrate);
450 if (pbits == NULL)
451 return -1;
452
453 fpga_reset(iobase);
454 for (i = 0; i < YAM_FPGA_SIZE; i++) {
455 if (fpga_write(iobase, pbits[i])) {
456 printk(KERN_ERR "yam: error in write cycle\n");
457 return -1; /* write... */
458 }
459 }
460
461 fpga_write(iobase, 0xFF);
462 rc = inb(MSR(iobase)); /* check DONE signal */
463
464 /* Needed for some hardwares */
465 delay(50);
466
467 return (rc & MSR_DSR) ? 0 : -1;
468 }
469
470
471 /************************************************************************
472 * Serial port init
473 ************************************************************************/
474
475 static void yam_set_uart(struct net_device *dev)
476 {
477 struct yam_port *yp = netdev_priv(dev);
478 int divisor = 115200 / yp->baudrate;
479
480 outb(0, IER(dev->base_addr));
481 outb(LCR_DLAB | LCR_BIT8, LCR(dev->base_addr));
482 outb(divisor, DLL(dev->base_addr));
483 outb(0, DLM(dev->base_addr));
484 outb(LCR_BIT8, LCR(dev->base_addr));
485 outb(PTT_OFF, MCR(dev->base_addr));
486 outb(0x00, FCR(dev->base_addr));
487
488 /* Flush pending irq */
489
490 inb(RBR(dev->base_addr));
491 inb(MSR(dev->base_addr));
492
493 /* Enable rx irq */
494
495 outb(ENABLE_RTXINT, IER(dev->base_addr));
496 }
497
498
499 /* --------------------------------------------------------------------- */
500
501 enum uart {
502 c_uart_unknown, c_uart_8250,
503 c_uart_16450, c_uart_16550, c_uart_16550A
504 };
505
506 static const char *uart_str[] =
507 {"unknown", "8250", "16450", "16550", "16550A"};
508
509 static enum uart yam_check_uart(unsigned int iobase)
510 {
511 unsigned char b1, b2, b3;
512 enum uart u;
513 enum uart uart_tab[] =
514 {c_uart_16450, c_uart_unknown, c_uart_16550, c_uart_16550A};
515
516 b1 = inb(MCR(iobase));
517 outb(b1 | 0x10, MCR(iobase)); /* loopback mode */
518 b2 = inb(MSR(iobase));
519 outb(0x1a, MCR(iobase));
520 b3 = inb(MSR(iobase)) & 0xf0;
521 outb(b1, MCR(iobase)); /* restore old values */
522 outb(b2, MSR(iobase));
523 if (b3 != 0x90)
524 return c_uart_unknown;
525 inb(RBR(iobase));
526 inb(RBR(iobase));
527 outb(0x01, FCR(iobase)); /* enable FIFOs */
528 u = uart_tab[(inb(IIR(iobase)) >> 6) & 3];
529 if (u == c_uart_16450) {
530 outb(0x5a, SCR(iobase));
531 b1 = inb(SCR(iobase));
532 outb(0xa5, SCR(iobase));
533 b2 = inb(SCR(iobase));
534 if ((b1 != 0x5a) || (b2 != 0xa5))
535 u = c_uart_8250;
536 }
537 return u;
538 }
539
540 /******************************************************************************
541 * Rx Section
542 ******************************************************************************/
543 static inline void yam_rx_flag(struct net_device *dev, struct yam_port *yp)
544 {
545 if (yp->dcd && yp->rx_len >= 3 && yp->rx_len < YAM_MAX_FRAME) {
546 int pkt_len = yp->rx_len - 2 + 1; /* -CRC + kiss */
547 struct sk_buff *skb;
548
549 if ((yp->rx_crch & yp->rx_crcl) != 0xFF) {
550 /* Bad crc */
551 } else {
552 if (!(skb = dev_alloc_skb(pkt_len))) {
553 printk(KERN_WARNING "%s: memory squeeze, dropping packet\n", dev->name);
554 ++dev->stats.rx_dropped;
555 } else {
556 unsigned char *cp;
557 cp = skb_put(skb, pkt_len);
558 *cp++ = 0; /* KISS kludge */
559 memcpy(cp, yp->rx_buf, pkt_len - 1);
560 skb->protocol = ax25_type_trans(skb, dev);
561 netif_rx(skb);
562 ++dev->stats.rx_packets;
563 }
564 }
565 }
566 yp->rx_len = 0;
567 yp->rx_crcl = 0x21;
568 yp->rx_crch = 0xf3;
569 }
570
571 static inline void yam_rx_byte(struct net_device *dev, struct yam_port *yp, unsigned char rxb)
572 {
573 if (yp->rx_len < YAM_MAX_FRAME) {
574 unsigned char c = yp->rx_crcl;
575 yp->rx_crcl = (chktabl[c] ^ yp->rx_crch);
576 yp->rx_crch = (chktabh[c] ^ rxb);
577 yp->rx_buf[yp->rx_len++] = rxb;
578 }
579 }
580
581 /********************************************************************************
582 * TX Section
583 ********************************************************************************/
584
585 static void ptt_on(struct net_device *dev)
586 {
587 outb(PTT_ON, MCR(dev->base_addr));
588 }
589
590 static void ptt_off(struct net_device *dev)
591 {
592 outb(PTT_OFF, MCR(dev->base_addr));
593 }
594
595 static netdev_tx_t yam_send_packet(struct sk_buff *skb,
596 struct net_device *dev)
597 {
598 struct yam_port *yp = netdev_priv(dev);
599
600 if (skb->protocol == htons(ETH_P_IP))
601 return ax25_ip_xmit(skb);
602
603 skb_queue_tail(&yp->send_queue, skb);
604 netif_trans_update(dev);
605 return NETDEV_TX_OK;
606 }
607
608 static void yam_start_tx(struct net_device *dev, struct yam_port *yp)
609 {
610 if ((yp->tx_state == TX_TAIL) || (yp->txd == 0))
611 yp->tx_count = 1;
612 else
613 yp->tx_count = (yp->bitrate * yp->txd) / 8000;
614 yp->tx_state = TX_HEAD;
615 ptt_on(dev);
616 }
617
618 static void yam_arbitrate(struct net_device *dev)
619 {
620 struct yam_port *yp = netdev_priv(dev);
621
622 if (yp->magic != YAM_MAGIC || yp->tx_state != TX_OFF ||
623 skb_queue_empty(&yp->send_queue))
624 return;
625 /* tx_state is TX_OFF and there is data to send */
626
627 if (yp->dupmode) {
628 /* Full duplex mode, don't wait */
629 yam_start_tx(dev, yp);
630 return;
631 }
632 if (yp->dcd) {
633 /* DCD on, wait slotime ... */
634 yp->slotcnt = yp->slot / 10;
635 return;
636 }
637 /* Is slottime passed ? */
638 if ((--yp->slotcnt) > 0)
639 return;
640
641 yp->slotcnt = yp->slot / 10;
642
643 /* is random > persist ? */
644 if ((prandom_u32() % 256) > yp->pers)
645 return;
646
647 yam_start_tx(dev, yp);
648 }
649
650 static void yam_dotimer(struct timer_list *unused)
651 {
652 int i;
653
654 for (i = 0; i < NR_PORTS; i++) {
655 struct net_device *dev = yam_devs[i];
656 if (dev && netif_running(dev))
657 yam_arbitrate(dev);
658 }
659 yam_timer.expires = jiffies + HZ / 100;
660 add_timer(&yam_timer);
661 }
662
663 static void yam_tx_byte(struct net_device *dev, struct yam_port *yp)
664 {
665 struct sk_buff *skb;
666 unsigned char b, temp;
667
668 switch (yp->tx_state) {
669 case TX_OFF:
670 break;
671 case TX_HEAD:
672 if (--yp->tx_count <= 0) {
673 if (!(skb = skb_dequeue(&yp->send_queue))) {
674 ptt_off(dev);
675 yp->tx_state = TX_OFF;
676 break;
677 }
678 yp->tx_state = TX_DATA;
679 if (skb->data[0] != 0) {
680 /* do_kiss_params(s, skb->data, skb->len); */
681 dev_kfree_skb_any(skb);
682 break;
683 }
684 yp->tx_len = skb->len - 1; /* strip KISS byte */
685 if (yp->tx_len >= YAM_MAX_FRAME || yp->tx_len < 2) {
686 dev_kfree_skb_any(skb);
687 break;
688 }
689 skb_copy_from_linear_data_offset(skb, 1,
690 yp->tx_buf,
691 yp->tx_len);
692 dev_kfree_skb_any(skb);
693 yp->tx_count = 0;
694 yp->tx_crcl = 0x21;
695 yp->tx_crch = 0xf3;
696 yp->tx_state = TX_DATA;
697 }
698 break;
699 case TX_DATA:
700 b = yp->tx_buf[yp->tx_count++];
701 outb(b, THR(dev->base_addr));
702 temp = yp->tx_crcl;
703 yp->tx_crcl = chktabl[temp] ^ yp->tx_crch;
704 yp->tx_crch = chktabh[temp] ^ b;
705 if (yp->tx_count >= yp->tx_len) {
706 yp->tx_state = TX_CRC1;
707 }
708 break;
709 case TX_CRC1:
710 yp->tx_crch = chktabl[yp->tx_crcl] ^ yp->tx_crch;
711 yp->tx_crcl = chktabh[yp->tx_crcl] ^ chktabl[yp->tx_crch] ^ 0xff;
712 outb(yp->tx_crcl, THR(dev->base_addr));
713 yp->tx_state = TX_CRC2;
714 break;
715 case TX_CRC2:
716 outb(chktabh[yp->tx_crch] ^ 0xFF, THR(dev->base_addr));
717 if (skb_queue_empty(&yp->send_queue)) {
718 yp->tx_count = (yp->bitrate * yp->txtail) / 8000;
719 if (yp->dupmode == 2)
720 yp->tx_count += (yp->bitrate * yp->holdd) / 8;
721 if (yp->tx_count == 0)
722 yp->tx_count = 1;
723 yp->tx_state = TX_TAIL;
724 } else {
725 yp->tx_count = 1;
726 yp->tx_state = TX_HEAD;
727 }
728 ++dev->stats.tx_packets;
729 break;
730 case TX_TAIL:
731 if (--yp->tx_count <= 0) {
732 yp->tx_state = TX_OFF;
733 ptt_off(dev);
734 }
735 break;
736 }
737 }
738
739 /***********************************************************************************
740 * ISR routine
741 ************************************************************************************/
742
743 static irqreturn_t yam_interrupt(int irq, void *dev_id)
744 {
745 struct net_device *dev;
746 struct yam_port *yp;
747 unsigned char iir;
748 int counter = 100;
749 int i;
750 int handled = 0;
751
752 for (i = 0; i < NR_PORTS; i++) {
753 dev = yam_devs[i];
754 yp = netdev_priv(dev);
755
756 if (!netif_running(dev))
757 continue;
758
759 while ((iir = IIR_MASK & inb(IIR(dev->base_addr))) != IIR_NOPEND) {
760 unsigned char msr = inb(MSR(dev->base_addr));
761 unsigned char lsr = inb(LSR(dev->base_addr));
762 unsigned char rxb;
763
764 handled = 1;
765
766 if (lsr & LSR_OE)
767 ++dev->stats.rx_fifo_errors;
768
769 yp->dcd = (msr & RX_DCD) ? 1 : 0;
770
771 if (--counter <= 0) {
772 printk(KERN_ERR "%s: too many irq iir=%d\n",
773 dev->name, iir);
774 goto out;
775 }
776 if (msr & TX_RDY) {
777 ++yp->nb_mdint;
778 yam_tx_byte(dev, yp);
779 }
780 if (lsr & LSR_RXC) {
781 ++yp->nb_rxint;
782 rxb = inb(RBR(dev->base_addr));
783 if (msr & RX_FLAG)
784 yam_rx_flag(dev, yp);
785 else
786 yam_rx_byte(dev, yp, rxb);
787 }
788 }
789 }
790 out:
791 return IRQ_RETVAL(handled);
792 }
793
794 #ifdef CONFIG_PROC_FS
795
796 static void *yam_seq_start(struct seq_file *seq, loff_t *pos)
797 {
798 return (*pos < NR_PORTS) ? yam_devs[*pos] : NULL;
799 }
800
801 static void *yam_seq_next(struct seq_file *seq, void *v, loff_t *pos)
802 {
803 ++*pos;
804 return (*pos < NR_PORTS) ? yam_devs[*pos] : NULL;
805 }
806
807 static void yam_seq_stop(struct seq_file *seq, void *v)
808 {
809 }
810
811 static int yam_seq_show(struct seq_file *seq, void *v)
812 {
813 struct net_device *dev = v;
814 const struct yam_port *yp = netdev_priv(dev);
815
816 seq_printf(seq, "Device %s\n", dev->name);
817 seq_printf(seq, " Up %d\n", netif_running(dev));
818 seq_printf(seq, " Speed %u\n", yp->bitrate);
819 seq_printf(seq, " IoBase 0x%x\n", yp->iobase);
820 seq_printf(seq, " BaudRate %u\n", yp->baudrate);
821 seq_printf(seq, " IRQ %u\n", yp->irq);
822 seq_printf(seq, " TxState %u\n", yp->tx_state);
823 seq_printf(seq, " Duplex %u\n", yp->dupmode);
824 seq_printf(seq, " HoldDly %u\n", yp->holdd);
825 seq_printf(seq, " TxDelay %u\n", yp->txd);
826 seq_printf(seq, " TxTail %u\n", yp->txtail);
827 seq_printf(seq, " SlotTime %u\n", yp->slot);
828 seq_printf(seq, " Persist %u\n", yp->pers);
829 seq_printf(seq, " TxFrames %lu\n", dev->stats.tx_packets);
830 seq_printf(seq, " RxFrames %lu\n", dev->stats.rx_packets);
831 seq_printf(seq, " TxInt %u\n", yp->nb_mdint);
832 seq_printf(seq, " RxInt %u\n", yp->nb_rxint);
833 seq_printf(seq, " RxOver %lu\n", dev->stats.rx_fifo_errors);
834 seq_printf(seq, "\n");
835 return 0;
836 }
837
838 static const struct seq_operations yam_seqops = {
839 .start = yam_seq_start,
840 .next = yam_seq_next,
841 .stop = yam_seq_stop,
842 .show = yam_seq_show,
843 };
844 #endif
845
846
847 /* --------------------------------------------------------------------- */
848
849 static int yam_open(struct net_device *dev)
850 {
851 struct yam_port *yp = netdev_priv(dev);
852 enum uart u;
853 int i;
854 int ret=0;
855
856 printk(KERN_INFO "Trying %s at iobase 0x%lx irq %u\n", dev->name, dev->base_addr, dev->irq);
857
858 if (!yp->bitrate)
859 return -ENXIO;
860 if (!dev->base_addr || dev->base_addr > 0x1000 - YAM_EXTENT ||
861 dev->irq < 2 || dev->irq > 15) {
862 return -ENXIO;
863 }
864 if (!request_region(dev->base_addr, YAM_EXTENT, dev->name))
865 {
866 printk(KERN_ERR "%s: cannot 0x%lx busy\n", dev->name, dev->base_addr);
867 return -EACCES;
868 }
869 if ((u = yam_check_uart(dev->base_addr)) == c_uart_unknown) {
870 printk(KERN_ERR "%s: cannot find uart type\n", dev->name);
871 ret = -EIO;
872 goto out_release_base;
873 }
874 if (fpga_download(dev->base_addr, yp->bitrate)) {
875 printk(KERN_ERR "%s: cannot init FPGA\n", dev->name);
876 ret = -EIO;
877 goto out_release_base;
878 }
879 outb(0, IER(dev->base_addr));
880 if (request_irq(dev->irq, yam_interrupt, IRQF_SHARED, dev->name, dev)) {
881 printk(KERN_ERR "%s: irq %d busy\n", dev->name, dev->irq);
882 ret = -EBUSY;
883 goto out_release_base;
884 }
885
886 yam_set_uart(dev);
887
888 netif_start_queue(dev);
889
890 yp->slotcnt = yp->slot / 10;
891
892 /* Reset overruns for all ports - FPGA programming makes overruns */
893 for (i = 0; i < NR_PORTS; i++) {
894 struct net_device *yam_dev = yam_devs[i];
895
896 inb(LSR(yam_dev->base_addr));
897 yam_dev->stats.rx_fifo_errors = 0;
898 }
899
900 printk(KERN_INFO "%s at iobase 0x%lx irq %u uart %s\n", dev->name, dev->base_addr, dev->irq,
901 uart_str[u]);
902 return 0;
903
904 out_release_base:
905 release_region(dev->base_addr, YAM_EXTENT);
906 return ret;
907 }
908
909 /* --------------------------------------------------------------------- */
910
911 static int yam_close(struct net_device *dev)
912 {
913 struct sk_buff *skb;
914 struct yam_port *yp = netdev_priv(dev);
915
916 if (!dev)
917 return -EINVAL;
918
919 /*
920 * disable interrupts
921 */
922 outb(0, IER(dev->base_addr));
923 outb(1, MCR(dev->base_addr));
924 /* Remove IRQ handler if last */
925 free_irq(dev->irq,dev);
926 release_region(dev->base_addr, YAM_EXTENT);
927 netif_stop_queue(dev);
928 while ((skb = skb_dequeue(&yp->send_queue)))
929 dev_kfree_skb(skb);
930
931 printk(KERN_INFO "%s: close yam at iobase 0x%lx irq %u\n",
932 yam_drvname, dev->base_addr, dev->irq);
933 return 0;
934 }
935
936 /* --------------------------------------------------------------------- */
937
938 static int yam_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
939 {
940 struct yam_port *yp = netdev_priv(dev);
941 struct yamdrv_ioctl_cfg yi;
942 struct yamdrv_ioctl_mcs *ym;
943 int ioctl_cmd;
944
945 if (copy_from_user(&ioctl_cmd, ifr->ifr_data, sizeof(int)))
946 return -EFAULT;
947
948 if (yp->magic != YAM_MAGIC)
949 return -EINVAL;
950
951 if (!capable(CAP_NET_ADMIN))
952 return -EPERM;
953
954 if (cmd != SIOCDEVPRIVATE)
955 return -EINVAL;
956
957 switch (ioctl_cmd) {
958
959 case SIOCYAMRESERVED:
960 return -EINVAL; /* unused */
961
962 case SIOCYAMSMCS:
963 if (netif_running(dev))
964 return -EINVAL; /* Cannot change this parameter when up */
965 ym = memdup_user(ifr->ifr_data,
966 sizeof(struct yamdrv_ioctl_mcs));
967 if (IS_ERR(ym))
968 return PTR_ERR(ym);
969 if (ym->cmd != SIOCYAMSMCS)
970 return -EINVAL;
971 if (ym->bitrate > YAM_MAXBITRATE) {
972 kfree(ym);
973 return -EINVAL;
974 }
975 /* setting predef as 0 for loading userdefined mcs data */
976 add_mcs(ym->bits, ym->bitrate, 0);
977 kfree(ym);
978 break;
979
980 case SIOCYAMSCFG:
981 if (!capable(CAP_SYS_RAWIO))
982 return -EPERM;
983 if (copy_from_user(&yi, ifr->ifr_data, sizeof(struct yamdrv_ioctl_cfg)))
984 return -EFAULT;
985
986 if (yi.cmd != SIOCYAMSCFG)
987 return -EINVAL;
988 if ((yi.cfg.mask & YAM_IOBASE) && netif_running(dev))
989 return -EINVAL; /* Cannot change this parameter when up */
990 if ((yi.cfg.mask & YAM_IRQ) && netif_running(dev))
991 return -EINVAL; /* Cannot change this parameter when up */
992 if ((yi.cfg.mask & YAM_BITRATE) && netif_running(dev))
993 return -EINVAL; /* Cannot change this parameter when up */
994 if ((yi.cfg.mask & YAM_BAUDRATE) && netif_running(dev))
995 return -EINVAL; /* Cannot change this parameter when up */
996
997 if (yi.cfg.mask & YAM_IOBASE) {
998 yp->iobase = yi.cfg.iobase;
999 dev->base_addr = yi.cfg.iobase;
1000 }
1001 if (yi.cfg.mask & YAM_IRQ) {
1002 if (yi.cfg.irq > 15)
1003 return -EINVAL;
1004 yp->irq = yi.cfg.irq;
1005 dev->irq = yi.cfg.irq;
1006 }
1007 if (yi.cfg.mask & YAM_BITRATE) {
1008 if (yi.cfg.bitrate > YAM_MAXBITRATE)
1009 return -EINVAL;
1010 yp->bitrate = yi.cfg.bitrate;
1011 }
1012 if (yi.cfg.mask & YAM_BAUDRATE) {
1013 if (yi.cfg.baudrate > YAM_MAXBAUDRATE)
1014 return -EINVAL;
1015 yp->baudrate = yi.cfg.baudrate;
1016 }
1017 if (yi.cfg.mask & YAM_MODE) {
1018 if (yi.cfg.mode > YAM_MAXMODE)
1019 return -EINVAL;
1020 yp->dupmode = yi.cfg.mode;
1021 }
1022 if (yi.cfg.mask & YAM_HOLDDLY) {
1023 if (yi.cfg.holddly > YAM_MAXHOLDDLY)
1024 return -EINVAL;
1025 yp->holdd = yi.cfg.holddly;
1026 }
1027 if (yi.cfg.mask & YAM_TXDELAY) {
1028 if (yi.cfg.txdelay > YAM_MAXTXDELAY)
1029 return -EINVAL;
1030 yp->txd = yi.cfg.txdelay;
1031 }
1032 if (yi.cfg.mask & YAM_TXTAIL) {
1033 if (yi.cfg.txtail > YAM_MAXTXTAIL)
1034 return -EINVAL;
1035 yp->txtail = yi.cfg.txtail;
1036 }
1037 if (yi.cfg.mask & YAM_PERSIST) {
1038 if (yi.cfg.persist > YAM_MAXPERSIST)
1039 return -EINVAL;
1040 yp->pers = yi.cfg.persist;
1041 }
1042 if (yi.cfg.mask & YAM_SLOTTIME) {
1043 if (yi.cfg.slottime > YAM_MAXSLOTTIME)
1044 return -EINVAL;
1045 yp->slot = yi.cfg.slottime;
1046 yp->slotcnt = yp->slot / 10;
1047 }
1048 break;
1049
1050 case SIOCYAMGCFG:
1051 memset(&yi, 0, sizeof(yi));
1052 yi.cfg.mask = 0xffffffff;
1053 yi.cfg.iobase = yp->iobase;
1054 yi.cfg.irq = yp->irq;
1055 yi.cfg.bitrate = yp->bitrate;
1056 yi.cfg.baudrate = yp->baudrate;
1057 yi.cfg.mode = yp->dupmode;
1058 yi.cfg.txdelay = yp->txd;
1059 yi.cfg.holddly = yp->holdd;
1060 yi.cfg.txtail = yp->txtail;
1061 yi.cfg.persist = yp->pers;
1062 yi.cfg.slottime = yp->slot;
1063 if (copy_to_user(ifr->ifr_data, &yi, sizeof(struct yamdrv_ioctl_cfg)))
1064 return -EFAULT;
1065 break;
1066
1067 default:
1068 return -EINVAL;
1069
1070 }
1071
1072 return 0;
1073 }
1074
1075 /* --------------------------------------------------------------------- */
1076
1077 static int yam_set_mac_address(struct net_device *dev, void *addr)
1078 {
1079 struct sockaddr *sa = (struct sockaddr *) addr;
1080
1081 /* addr is an AX.25 shifted ASCII mac address */
1082 memcpy(dev->dev_addr, sa->sa_data, dev->addr_len);
1083 return 0;
1084 }
1085
1086 /* --------------------------------------------------------------------- */
1087
1088 static const struct net_device_ops yam_netdev_ops = {
1089 .ndo_open = yam_open,
1090 .ndo_stop = yam_close,
1091 .ndo_start_xmit = yam_send_packet,
1092 .ndo_do_ioctl = yam_ioctl,
1093 .ndo_set_mac_address = yam_set_mac_address,
1094 };
1095
1096 static void yam_setup(struct net_device *dev)
1097 {
1098 struct yam_port *yp = netdev_priv(dev);
1099
1100 yp->magic = YAM_MAGIC;
1101 yp->bitrate = DEFAULT_BITRATE;
1102 yp->baudrate = DEFAULT_BITRATE * 2;
1103 yp->iobase = 0;
1104 yp->irq = 0;
1105 yp->dupmode = 0;
1106 yp->holdd = DEFAULT_HOLDD;
1107 yp->txd = DEFAULT_TXD;
1108 yp->txtail = DEFAULT_TXTAIL;
1109 yp->slot = DEFAULT_SLOT;
1110 yp->pers = DEFAULT_PERS;
1111 yp->dev = dev;
1112
1113 dev->base_addr = yp->iobase;
1114 dev->irq = yp->irq;
1115
1116 skb_queue_head_init(&yp->send_queue);
1117
1118 dev->netdev_ops = &yam_netdev_ops;
1119 dev->header_ops = &ax25_header_ops;
1120
1121 dev->type = ARPHRD_AX25;
1122 dev->hard_header_len = AX25_MAX_HEADER_LEN;
1123 dev->mtu = AX25_MTU;
1124 dev->addr_len = AX25_ADDR_LEN;
1125 memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN);
1126 memcpy(dev->dev_addr, &ax25_defaddr, AX25_ADDR_LEN);
1127 }
1128
1129 static int __init yam_init_driver(void)
1130 {
1131 struct net_device *dev;
1132 int i, err;
1133 char name[IFNAMSIZ];
1134
1135 printk(yam_drvinfo);
1136
1137 for (i = 0; i < NR_PORTS; i++) {
1138 sprintf(name, "yam%d", i);
1139
1140 dev = alloc_netdev(sizeof(struct yam_port), name,
1141 NET_NAME_UNKNOWN, yam_setup);
1142 if (!dev) {
1143 pr_err("yam: cannot allocate net device\n");
1144 err = -ENOMEM;
1145 goto error;
1146 }
1147
1148 err = register_netdev(dev);
1149 if (err) {
1150 printk(KERN_WARNING "yam: cannot register net device %s\n", dev->name);
1151 free_netdev(dev);
1152 goto error;
1153 }
1154 yam_devs[i] = dev;
1155
1156 }
1157
1158 timer_setup(&yam_timer, yam_dotimer, 0);
1159 yam_timer.expires = jiffies + HZ / 100;
1160 add_timer(&yam_timer);
1161
1162 proc_create_seq("yam", 0444, init_net.proc_net, &yam_seqops);
1163 return 0;
1164 error:
1165 while (--i >= 0) {
1166 unregister_netdev(yam_devs[i]);
1167 free_netdev(yam_devs[i]);
1168 }
1169 return err;
1170 }
1171
1172 /* --------------------------------------------------------------------- */
1173
1174 static void __exit yam_cleanup_driver(void)
1175 {
1176 struct yam_mcs *p;
1177 int i;
1178
1179 del_timer_sync(&yam_timer);
1180 for (i = 0; i < NR_PORTS; i++) {
1181 struct net_device *dev = yam_devs[i];
1182 if (dev) {
1183 unregister_netdev(dev);
1184 free_netdev(dev);
1185 }
1186 }
1187
1188 while (yam_data) {
1189 p = yam_data;
1190 yam_data = yam_data->next;
1191 kfree(p);
1192 }
1193
1194 remove_proc_entry("yam", init_net.proc_net);
1195 }
1196
1197 /* --------------------------------------------------------------------- */
1198
1199 MODULE_AUTHOR("Frederic Rible F1OAT frible@teaser.fr");
1200 MODULE_DESCRIPTION("Yam amateur radio modem driver");
1201 MODULE_LICENSE("GPL");
1202 MODULE_FIRMWARE(FIRMWARE_1200);
1203 MODULE_FIRMWARE(FIRMWARE_9600);
1204
1205 module_init(yam_init_driver);
1206 module_exit(yam_cleanup_driver);
1207
1208 /* --------------------------------------------------------------------- */
1209
Linux with added FPC-III support