Linux 4.19.133
[linux/fpc-iii.git] / drivers / net / wireless / broadcom / brcm80211 / brcmfmac / core.h
blobdcf6e27cc16f2ac32497499d9ffcf4d771dff9a8
1 /*
2 * Copyright (c) 2010 Broadcom Corporation
4 * Permission to use, copy, modify, and/or distribute this software for any
5 * purpose with or without fee is hereby granted, provided that the above
6 * copyright notice and this permission notice appear in all copies.
8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
11 * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
13 * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
14 * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
17 /****************
18 * Common types *
21 #ifndef BRCMFMAC_CORE_H
22 #define BRCMFMAC_CORE_H
24 #include <net/cfg80211.h>
25 #include "fweh.h"
27 #define TOE_TX_CSUM_OL 0x00000001
28 #define TOE_RX_CSUM_OL 0x00000002
30 /* For supporting multiple interfaces */
31 #define BRCMF_MAX_IFS 16
33 /* Small, medium and maximum buffer size for dcmd
35 #define BRCMF_DCMD_SMLEN 256
36 #define BRCMF_DCMD_MEDLEN 1536
37 #define BRCMF_DCMD_MAXLEN 8192
39 /* IOCTL from host to device are limited in lenght. A device can only handle
40 * ethernet frame size. This limitation is to be applied by protocol layer.
42 #define BRCMF_TX_IOCTL_MAX_MSG_SIZE (ETH_FRAME_LEN+ETH_FCS_LEN)
44 #define BRCMF_AMPDU_RX_REORDER_MAXFLOWS 256
46 /* Length of firmware version string stored for
47 * ethtool driver info which uses 32 bytes as well.
49 #define BRCMF_DRIVER_FIRMWARE_VERSION_LEN 32
51 #define NDOL_MAX_ENTRIES 8
53 /**
54 * struct brcmf_ampdu_rx_reorder - AMPDU receive reorder info
56 * @pktslots: dynamic allocated array for ordering AMPDU packets.
57 * @flow_id: AMPDU flow identifier.
58 * @cur_idx: last AMPDU index from firmware.
59 * @exp_idx: expected next AMPDU index.
60 * @max_idx: maximum amount of packets per AMPDU.
61 * @pend_pkts: number of packets currently in @pktslots.
63 struct brcmf_ampdu_rx_reorder {
64 struct sk_buff **pktslots;
65 u8 flow_id;
66 u8 cur_idx;
67 u8 exp_idx;
68 u8 max_idx;
69 u8 pend_pkts;
72 /* Forward decls for struct brcmf_pub (see below) */
73 struct brcmf_proto; /* device communication protocol info */
74 struct brcmf_fws_info; /* firmware signalling info */
75 struct brcmf_mp_device; /* module paramateres, device specific */
78 * struct brcmf_rev_info
80 * The result field stores the error code of the
81 * revision info request from firmware. For the
82 * other fields see struct brcmf_rev_info_le in
83 * fwil_types.h
85 struct brcmf_rev_info {
86 int result;
87 u32 vendorid;
88 u32 deviceid;
89 u32 radiorev;
90 u32 corerev;
91 u32 boardid;
92 u32 boardvendor;
93 u32 boardrev;
94 u32 driverrev;
95 u32 ucoderev;
96 u32 bus;
97 char chipname[12];
98 u32 phytype;
99 u32 phyrev;
100 u32 anarev;
101 u32 chippkg;
102 u32 nvramrev;
105 /* Common structure for module and instance linkage */
106 struct brcmf_pub {
107 /* Linkage ponters */
108 struct brcmf_bus *bus_if;
109 struct brcmf_proto *proto;
110 struct wiphy *wiphy;
111 struct brcmf_cfg80211_info *config;
113 /* Internal brcmf items */
114 uint hdrlen; /* Total BRCMF header length (proto + bus) */
116 /* Dongle media info */
117 char fwver[BRCMF_DRIVER_FIRMWARE_VERSION_LEN];
118 u8 mac[ETH_ALEN]; /* MAC address obtained from dongle */
120 struct mac_address addresses[BRCMF_MAX_IFS];
122 struct brcmf_if *iflist[BRCMF_MAX_IFS];
123 s32 if2bss[BRCMF_MAX_IFS];
124 struct brcmf_if *mon_if;
126 struct mutex proto_block;
127 unsigned char proto_buf[BRCMF_DCMD_MAXLEN];
129 struct brcmf_fweh_info fweh;
131 struct brcmf_ampdu_rx_reorder
132 *reorder_flows[BRCMF_AMPDU_RX_REORDER_MAXFLOWS];
134 u32 feat_flags;
135 u32 chip_quirks;
137 struct brcmf_rev_info revinfo;
138 #ifdef DEBUG
139 struct dentry *dbgfs_dir;
140 #endif
142 struct notifier_block inetaddr_notifier;
143 struct notifier_block inet6addr_notifier;
144 struct brcmf_mp_device *settings;
146 u8 clmver[BRCMF_DCMD_SMLEN];
149 /* forward declarations */
150 struct brcmf_cfg80211_vif;
151 struct brcmf_fws_mac_descriptor;
154 * enum brcmf_netif_stop_reason - reason for stopping netif queue.
156 * @BRCMF_NETIF_STOP_REASON_FWS_FC:
157 * netif stopped due to firmware signalling flow control.
158 * @BRCMF_NETIF_STOP_REASON_FLOW:
159 * netif stopped due to flowring full.
160 * @BRCMF_NETIF_STOP_REASON_DISCONNECTED:
161 * netif stopped due to not being connected (STA mode).
163 enum brcmf_netif_stop_reason {
164 BRCMF_NETIF_STOP_REASON_FWS_FC = BIT(0),
165 BRCMF_NETIF_STOP_REASON_FLOW = BIT(1),
166 BRCMF_NETIF_STOP_REASON_DISCONNECTED = BIT(2)
170 * struct brcmf_if - interface control information.
172 * @drvr: points to device related information.
173 * @vif: points to cfg80211 specific interface information.
174 * @ndev: associated network device.
175 * @multicast_work: worker object for multicast provisioning.
176 * @ndoffload_work: worker object for neighbor discovery offload configuration.
177 * @fws_desc: interface specific firmware-signalling descriptor.
178 * @ifidx: interface index in device firmware.
179 * @bsscfgidx: index of bss associated with this interface.
180 * @mac_addr: assigned mac address.
181 * @netif_stop: bitmap indicates reason why netif queues are stopped.
182 * @netif_stop_lock: spinlock for update netif_stop from multiple sources.
183 * @pend_8021x_cnt: tracks outstanding number of 802.1x frames.
184 * @pend_8021x_wait: used for signalling change in count.
185 * @fwil_fwerr: flag indicating fwil layer should return firmware error codes.
187 struct brcmf_if {
188 struct brcmf_pub *drvr;
189 struct brcmf_cfg80211_vif *vif;
190 struct net_device *ndev;
191 struct work_struct multicast_work;
192 struct work_struct ndoffload_work;
193 struct brcmf_fws_mac_descriptor *fws_desc;
194 int ifidx;
195 s32 bsscfgidx;
196 u8 mac_addr[ETH_ALEN];
197 u8 netif_stop;
198 spinlock_t netif_stop_lock;
199 atomic_t pend_8021x_cnt;
200 wait_queue_head_t pend_8021x_wait;
201 struct in6_addr ipv6_addr_tbl[NDOL_MAX_ENTRIES];
202 u8 ipv6addr_idx;
203 bool fwil_fwerr;
206 int brcmf_netdev_wait_pend8021x(struct brcmf_if *ifp);
208 /* Return pointer to interface name */
209 char *brcmf_ifname(struct brcmf_if *ifp);
210 struct brcmf_if *brcmf_get_ifp(struct brcmf_pub *drvr, int ifidx);
211 void brcmf_configure_arp_nd_offload(struct brcmf_if *ifp, bool enable);
212 int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked);
213 struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bsscfgidx, s32 ifidx,
214 bool is_p2pdev, const char *name, u8 *mac_addr);
215 void brcmf_remove_interface(struct brcmf_if *ifp, bool rtnl_locked);
216 void brcmf_txflowblock_if(struct brcmf_if *ifp,
217 enum brcmf_netif_stop_reason reason, bool state);
218 void brcmf_txfinalize(struct brcmf_if *ifp, struct sk_buff *txp, bool success);
219 void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb);
220 void brcmf_netif_mon_rx(struct brcmf_if *ifp, struct sk_buff *skb);
221 void brcmf_net_setcarrier(struct brcmf_if *ifp, bool on);
222 int __init brcmf_core_init(void);
223 void __exit brcmf_core_exit(void);
225 #endif /* BRCMFMAC_CORE_H */