3 * Linux device driver for USB based Prism54
5 * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
7 * Based on the islsm (softmac prism54) driver, which is:
8 * Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
15 #include <linux/usb.h>
16 #include <linux/pci.h>
17 #include <linux/slab.h>
18 #include <linux/firmware.h>
19 #include <linux/etherdevice.h>
20 #include <linux/delay.h>
21 #include <linux/crc32.h>
22 #include <linux/module.h>
23 #include <net/mac80211.h>
29 MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
30 MODULE_DESCRIPTION("Prism54 USB wireless driver");
31 MODULE_LICENSE("GPL");
32 MODULE_ALIAS("prism54usb");
33 MODULE_FIRMWARE("isl3886usb");
34 MODULE_FIRMWARE("isl3887usb");
36 static struct usb_driver p54u_driver
;
41 * Always update our wiki's device list (located at:
42 * http://wireless.kernel.org/en/users/Drivers/p54/devices ),
43 * whenever you add a new device.
46 static const struct usb_device_id p54u_table
[] = {
47 /* Version 1 devices (pci chip + net2280) */
48 {USB_DEVICE(0x0411, 0x0050)}, /* Buffalo WLI2-USB2-G54 */
49 {USB_DEVICE(0x045e, 0x00c2)}, /* Microsoft MN-710 */
50 {USB_DEVICE(0x0506, 0x0a11)}, /* 3COM 3CRWE254G72 */
51 {USB_DEVICE(0x0675, 0x0530)}, /* DrayTek Vigor 530 */
52 {USB_DEVICE(0x06b9, 0x0120)}, /* Thomson SpeedTouch 120g */
53 {USB_DEVICE(0x0707, 0xee06)}, /* SMC 2862W-G */
54 {USB_DEVICE(0x07aa, 0x001c)}, /* Corega CG-WLUSB2GT */
55 {USB_DEVICE(0x083a, 0x4501)}, /* Accton 802.11g WN4501 USB */
56 {USB_DEVICE(0x083a, 0x4502)}, /* Siemens Gigaset USB Adapter */
57 {USB_DEVICE(0x083a, 0x5501)}, /* Phillips CPWUA054 */
58 {USB_DEVICE(0x0846, 0x4200)}, /* Netgear WG121 */
59 {USB_DEVICE(0x0846, 0x4210)}, /* Netgear WG121 the second ? */
60 {USB_DEVICE(0x0846, 0x4220)}, /* Netgear WG111 */
61 {USB_DEVICE(0x09aa, 0x1000)}, /* Spinnaker Proto board */
62 {USB_DEVICE(0x0bf8, 0x1007)}, /* Fujitsu E-5400 USB */
63 {USB_DEVICE(0x0cde, 0x0006)}, /* Medion 40900, Roper Europe */
64 {USB_DEVICE(0x0db0, 0x6826)}, /* MSI UB54G (MS-6826) */
65 {USB_DEVICE(0x107b, 0x55f2)}, /* Gateway WGU-210 (Gemtek) */
66 {USB_DEVICE(0x124a, 0x4023)}, /* Shuttle PN15, Airvast WM168g, IOGear GWU513 */
67 {USB_DEVICE(0x124a, 0x4026)}, /* AirVasT USB wireless device */
68 {USB_DEVICE(0x1435, 0x0210)}, /* Inventel UR054G */
69 {USB_DEVICE(0x15a9, 0x0002)}, /* Gemtek WUBI-100GW 802.11g */
70 {USB_DEVICE(0x1630, 0x0005)}, /* 2Wire 802.11g USB (v1) / Z-Com */
71 {USB_DEVICE(0x182d, 0x096b)}, /* Sitecom WL-107 */
72 {USB_DEVICE(0x1915, 0x2234)}, /* Linksys WUSB54G OEM */
73 {USB_DEVICE(0x1915, 0x2235)}, /* Linksys WUSB54G Portable OEM */
74 {USB_DEVICE(0x2001, 0x3701)}, /* DLink DWL-G120 Spinnaker */
75 {USB_DEVICE(0x2001, 0x3703)}, /* DLink DWL-G122 */
76 {USB_DEVICE(0x2001, 0x3762)}, /* Conceptronic C54U */
77 {USB_DEVICE(0x5041, 0x2234)}, /* Linksys WUSB54G */
78 {USB_DEVICE(0x5041, 0x2235)}, /* Linksys WUSB54G Portable */
80 /* Version 2 devices (3887) */
81 {USB_DEVICE(0x0471, 0x1230)}, /* Philips CPWUA054/00 */
82 {USB_DEVICE(0x050d, 0x7050)}, /* Belkin F5D7050 ver 1000 */
83 {USB_DEVICE(0x0572, 0x2000)}, /* Cohiba Proto board */
84 {USB_DEVICE(0x0572, 0x2002)}, /* Cohiba Proto board */
85 {USB_DEVICE(0x06a9, 0x000e)}, /* Westell 802.11g USB (A90-211WG-01) */
86 {USB_DEVICE(0x06b9, 0x0121)}, /* Thomson SpeedTouch 121g */
87 {USB_DEVICE(0x0707, 0xee13)}, /* SMC 2862W-G version 2 */
88 {USB_DEVICE(0x07aa, 0x0020)}, /* Corega WLUSB2GTST USB */
89 {USB_DEVICE(0x0803, 0x4310)}, /* Zoom 4410a */
90 {USB_DEVICE(0x083a, 0x4521)}, /* Siemens Gigaset USB Adapter 54 version 2 */
91 {USB_DEVICE(0x083a, 0x4531)}, /* T-Com Sinus 154 data II */
92 {USB_DEVICE(0x083a, 0xc501)}, /* Zoom Wireless-G 4410 */
93 {USB_DEVICE(0x083a, 0xf503)}, /* Accton FD7050E ver 1010ec */
94 {USB_DEVICE(0x0846, 0x4240)}, /* Netgear WG111 (v2) */
95 {USB_DEVICE(0x0915, 0x2000)}, /* Cohiba Proto board */
96 {USB_DEVICE(0x0915, 0x2002)}, /* Cohiba Proto board */
97 {USB_DEVICE(0x0baf, 0x0118)}, /* U.S. Robotics U5 802.11g Adapter*/
98 {USB_DEVICE(0x0bf8, 0x1009)}, /* FUJITSU E-5400 USB D1700*/
99 /* {USB_DEVICE(0x0cde, 0x0006)}, * Medion MD40900 already listed above,
100 * just noting it here for clarity */
101 {USB_DEVICE(0x0cde, 0x0008)}, /* Sagem XG703A */
102 {USB_DEVICE(0x0cde, 0x0015)}, /* Zcomax XG-705A */
103 {USB_DEVICE(0x0d8e, 0x3762)}, /* DLink DWL-G120 Cohiba */
104 {USB_DEVICE(0x124a, 0x4025)}, /* IOGear GWU513 (GW3887IK chip) */
105 {USB_DEVICE(0x1260, 0xee22)}, /* SMC 2862W-G version 2 */
106 {USB_DEVICE(0x13b1, 0x000a)}, /* Linksys WUSB54G ver 2 */
107 {USB_DEVICE(0x13B1, 0x000C)}, /* Linksys WUSB54AG */
108 {USB_DEVICE(0x1413, 0x5400)}, /* Telsey 802.11g USB2.0 Adapter */
109 {USB_DEVICE(0x1435, 0x0427)}, /* Inventel UR054G */
110 /* {USB_DEVICE(0x15a9, 0x0002)}, * Also SparkLAN WL-682 with 3887 */
111 {USB_DEVICE(0x1668, 0x1050)}, /* Actiontec 802UIG-1 */
112 {USB_DEVICE(0x1740, 0x1000)}, /* Senao NUB-350 */
113 {USB_DEVICE(0x2001, 0x3704)}, /* DLink DWL-G122 rev A2 */
114 {USB_DEVICE(0x2001, 0x3705)}, /* D-Link DWL-G120 rev C1 */
115 {USB_DEVICE(0x413c, 0x5513)}, /* Dell WLA3310 USB Wireless Adapter */
116 {USB_DEVICE(0x413c, 0x8102)}, /* Spinnaker DUT */
117 {USB_DEVICE(0x413c, 0x8104)}, /* Cohiba Proto board */
121 MODULE_DEVICE_TABLE(usb
, p54u_table
);
123 static const struct {
125 enum p54u_hw_type type
;
128 } p54u_fwlist
[__NUM_P54U_HWTYPES
] = {
130 .type
= P54U_NET2280
,
133 .hw
= "ISL3886 + net2280",
143 static void p54u_rx_cb(struct urb
*urb
)
145 struct sk_buff
*skb
= (struct sk_buff
*) urb
->context
;
146 struct p54u_rx_info
*info
= (struct p54u_rx_info
*)skb
->cb
;
147 struct ieee80211_hw
*dev
= info
->dev
;
148 struct p54u_priv
*priv
= dev
->priv
;
150 skb_unlink(skb
, &priv
->rx_queue
);
152 if (unlikely(urb
->status
)) {
153 dev_kfree_skb_irq(skb
);
157 skb_put(skb
, urb
->actual_length
);
159 if (priv
->hw_type
== P54U_NET2280
)
160 skb_pull(skb
, priv
->common
.tx_hdr_len
);
161 if (priv
->common
.fw_interface
== FW_LM87
) {
166 if (p54_rx(dev
, skb
)) {
167 skb
= dev_alloc_skb(priv
->common
.rx_mtu
+ 32);
168 if (unlikely(!skb
)) {
169 /* TODO check rx queue length and refill *somewhere* */
173 info
= (struct p54u_rx_info
*) skb
->cb
;
176 urb
->transfer_buffer
= skb_tail_pointer(skb
);
179 if (priv
->hw_type
== P54U_NET2280
)
180 skb_push(skb
, priv
->common
.tx_hdr_len
);
181 if (priv
->common
.fw_interface
== FW_LM87
) {
185 skb_reset_tail_pointer(skb
);
187 urb
->transfer_buffer
= skb_tail_pointer(skb
);
189 skb_queue_tail(&priv
->rx_queue
, skb
);
190 usb_anchor_urb(urb
, &priv
->submitted
);
191 if (usb_submit_urb(urb
, GFP_ATOMIC
)) {
192 skb_unlink(skb
, &priv
->rx_queue
);
193 usb_unanchor_urb(urb
);
194 dev_kfree_skb_irq(skb
);
198 static void p54u_tx_cb(struct urb
*urb
)
200 struct sk_buff
*skb
= urb
->context
;
201 struct ieee80211_hw
*dev
=
202 usb_get_intfdata(usb_ifnum_to_if(urb
->dev
, 0));
204 p54_free_skb(dev
, skb
);
207 static void p54u_tx_dummy_cb(struct urb
*urb
) { }
209 static void p54u_free_urbs(struct ieee80211_hw
*dev
)
211 struct p54u_priv
*priv
= dev
->priv
;
212 usb_kill_anchored_urbs(&priv
->submitted
);
215 static void p54u_stop(struct ieee80211_hw
*dev
)
218 * TODO: figure out how to reliably stop the 3887 and net2280 so
219 * the hardware is still usable next time we want to start it.
220 * until then, we just stop listening to the hardware..
225 static int p54u_init_urbs(struct ieee80211_hw
*dev
)
227 struct p54u_priv
*priv
= dev
->priv
;
228 struct urb
*entry
= NULL
;
230 struct p54u_rx_info
*info
;
233 while (skb_queue_len(&priv
->rx_queue
) < 32) {
234 skb
= __dev_alloc_skb(priv
->common
.rx_mtu
+ 32, GFP_KERNEL
);
239 entry
= usb_alloc_urb(0, GFP_KERNEL
);
245 usb_fill_bulk_urb(entry
, priv
->udev
,
246 usb_rcvbulkpipe(priv
->udev
, P54U_PIPE_DATA
),
247 skb_tail_pointer(skb
),
248 priv
->common
.rx_mtu
+ 32, p54u_rx_cb
, skb
);
249 info
= (struct p54u_rx_info
*) skb
->cb
;
252 skb_queue_tail(&priv
->rx_queue
, skb
);
254 usb_anchor_urb(entry
, &priv
->submitted
);
255 ret
= usb_submit_urb(entry
, GFP_KERNEL
);
257 skb_unlink(skb
, &priv
->rx_queue
);
258 usb_unanchor_urb(entry
);
274 static int p54u_open(struct ieee80211_hw
*dev
)
277 * TODO: Because we don't know how to reliably stop the 3887 and
278 * the isl3886+net2280, other than brutally cut off all
279 * communications. We have to reinitialize the urbs on every start.
281 return p54u_init_urbs(dev
);
284 static __le32
p54u_lm87_chksum(const __le32
*data
, size_t length
)
290 chk
^= le32_to_cpu(*data
++);
291 chk
= (chk
>> 5) ^ (chk
<< 3);
294 return cpu_to_le32(chk
);
297 static void p54u_tx_lm87(struct ieee80211_hw
*dev
, struct sk_buff
*skb
)
299 struct p54u_priv
*priv
= dev
->priv
;
300 struct urb
*data_urb
;
301 struct lm87_tx_hdr
*hdr
= (void *)skb
->data
- sizeof(*hdr
);
303 data_urb
= usb_alloc_urb(0, GFP_ATOMIC
);
305 p54_free_skb(dev
, skb
);
309 hdr
->chksum
= p54u_lm87_chksum((__le32
*)skb
->data
, skb
->len
);
310 hdr
->device_addr
= ((struct p54_hdr
*)skb
->data
)->req_id
;
312 usb_fill_bulk_urb(data_urb
, priv
->udev
,
313 usb_sndbulkpipe(priv
->udev
, P54U_PIPE_DATA
),
314 hdr
, skb
->len
+ sizeof(*hdr
), FREE_AFTER_TX(skb
) ?
315 p54u_tx_cb
: p54u_tx_dummy_cb
, skb
);
316 data_urb
->transfer_flags
|= URB_ZERO_PACKET
;
318 usb_anchor_urb(data_urb
, &priv
->submitted
);
319 if (usb_submit_urb(data_urb
, GFP_ATOMIC
)) {
320 usb_unanchor_urb(data_urb
);
321 p54_free_skb(dev
, skb
);
323 usb_free_urb(data_urb
);
326 static void p54u_tx_net2280(struct ieee80211_hw
*dev
, struct sk_buff
*skb
)
328 struct p54u_priv
*priv
= dev
->priv
;
329 struct urb
*int_urb
= NULL
, *data_urb
= NULL
;
330 struct net2280_tx_hdr
*hdr
= (void *)skb
->data
- sizeof(*hdr
);
331 struct net2280_reg_write
*reg
= NULL
;
334 reg
= kmalloc(sizeof(*reg
), GFP_ATOMIC
);
338 int_urb
= usb_alloc_urb(0, GFP_ATOMIC
);
342 data_urb
= usb_alloc_urb(0, GFP_ATOMIC
);
346 reg
->port
= cpu_to_le16(NET2280_DEV_U32
);
347 reg
->addr
= cpu_to_le32(P54U_DEV_BASE
);
348 reg
->val
= cpu_to_le32(ISL38XX_DEV_INT_DATA
);
350 memset(hdr
, 0, sizeof(*hdr
));
351 hdr
->len
= cpu_to_le16(skb
->len
);
352 hdr
->device_addr
= ((struct p54_hdr
*) skb
->data
)->req_id
;
354 usb_fill_bulk_urb(int_urb
, priv
->udev
,
355 usb_sndbulkpipe(priv
->udev
, P54U_PIPE_DEV
), reg
, sizeof(*reg
),
356 p54u_tx_dummy_cb
, dev
);
359 * URB_FREE_BUFFER triggers a code path in the USB subsystem that will
360 * free what is inside the transfer_buffer after the last reference to
361 * the int_urb is dropped.
363 int_urb
->transfer_flags
|= URB_FREE_BUFFER
| URB_ZERO_PACKET
;
366 usb_fill_bulk_urb(data_urb
, priv
->udev
,
367 usb_sndbulkpipe(priv
->udev
, P54U_PIPE_DATA
),
368 hdr
, skb
->len
+ sizeof(*hdr
), FREE_AFTER_TX(skb
) ?
369 p54u_tx_cb
: p54u_tx_dummy_cb
, skb
);
370 data_urb
->transfer_flags
|= URB_ZERO_PACKET
;
372 usb_anchor_urb(int_urb
, &priv
->submitted
);
373 err
= usb_submit_urb(int_urb
, GFP_ATOMIC
);
375 usb_unanchor_urb(int_urb
);
379 usb_anchor_urb(data_urb
, &priv
->submitted
);
380 err
= usb_submit_urb(data_urb
, GFP_ATOMIC
);
382 usb_unanchor_urb(data_urb
);
386 usb_free_urb(int_urb
);
387 usb_free_urb(data_urb
);
391 p54_free_skb(dev
, skb
);
395 static int p54u_write(struct p54u_priv
*priv
,
396 struct net2280_reg_write
*buf
,
397 enum net2280_op_type type
,
398 __le32 addr
, __le32 val
)
404 ep
= usb_sndbulkpipe(priv
->udev
, P54U_PIPE_DEV
);
406 ep
= usb_sndbulkpipe(priv
->udev
, P54U_PIPE_BRG
);
408 buf
->port
= cpu_to_le16(type
);
412 return usb_bulk_msg(priv
->udev
, ep
, buf
, sizeof(*buf
), &alen
, 1000);
415 static int p54u_read(struct p54u_priv
*priv
, void *buf
,
416 enum net2280_op_type type
,
417 __le32 addr
, __le32
*val
)
419 struct net2280_reg_read
*read
= buf
;
429 read
->port
= cpu_to_le16(type
);
432 err
= usb_bulk_msg(priv
->udev
, usb_sndbulkpipe(priv
->udev
, ep
),
433 read
, sizeof(*read
), &alen
, 1000);
437 err
= usb_bulk_msg(priv
->udev
, usb_rcvbulkpipe(priv
->udev
, ep
),
438 reg
, sizeof(*reg
), &alen
, 1000);
446 static int p54u_bulk_msg(struct p54u_priv
*priv
, unsigned int ep
,
447 void *data
, size_t len
)
450 return usb_bulk_msg(priv
->udev
, usb_sndbulkpipe(priv
->udev
, ep
),
451 data
, len
, &alen
, 2000);
454 static int p54u_device_reset(struct ieee80211_hw
*dev
)
456 struct p54u_priv
*priv
= dev
->priv
;
457 int ret
, lock
= (priv
->intf
->condition
!= USB_INTERFACE_BINDING
);
460 ret
= usb_lock_device_for_reset(priv
->udev
, priv
->intf
);
462 dev_err(&priv
->udev
->dev
, "(p54usb) unable to lock "
463 "device for reset (%d)!\n", ret
);
468 ret
= usb_reset_device(priv
->udev
);
470 usb_unlock_device(priv
->udev
);
473 dev_err(&priv
->udev
->dev
, "(p54usb) unable to reset "
474 "device (%d)!\n", ret
);
479 static const char p54u_romboot_3887
[] = "~~~~";
480 static int p54u_firmware_reset_3887(struct ieee80211_hw
*dev
)
482 struct p54u_priv
*priv
= dev
->priv
;
486 buf
= kmemdup(p54u_romboot_3887
, 4, GFP_KERNEL
);
489 ret
= p54u_bulk_msg(priv
, P54U_PIPE_DATA
,
493 dev_err(&priv
->udev
->dev
, "(p54usb) unable to jump to "
494 "boot ROM (%d)!\n", ret
);
499 static const char p54u_firmware_upload_3887
[] = "<\r";
500 static int p54u_upload_firmware_3887(struct ieee80211_hw
*dev
)
502 struct p54u_priv
*priv
= dev
->priv
;
507 unsigned int left
, remains
, block_size
;
508 struct x2_header
*hdr
;
509 unsigned long timeout
;
511 err
= p54u_firmware_reset_3887(dev
);
515 tmp
= buf
= kmalloc(P54U_FW_BLOCK
, GFP_KERNEL
);
519 left
= block_size
= min_t(size_t, P54U_FW_BLOCK
, priv
->fw
->size
);
520 strcpy(buf
, p54u_firmware_upload_3887
);
521 left
-= strlen(p54u_firmware_upload_3887
);
522 tmp
+= strlen(p54u_firmware_upload_3887
);
524 data
= priv
->fw
->data
;
525 remains
= priv
->fw
->size
;
527 hdr
= (struct x2_header
*)(buf
+ strlen(p54u_firmware_upload_3887
));
528 memcpy(hdr
->signature
, X2_SIGNATURE
, X2_SIGNATURE_SIZE
);
529 hdr
->fw_load_addr
= cpu_to_le32(ISL38XX_DEV_FIRMWARE_ADDR
);
530 hdr
->fw_length
= cpu_to_le32(priv
->fw
->size
);
531 hdr
->crc
= cpu_to_le32(~crc32_le(~0, (void *)&hdr
->fw_load_addr
,
533 left
-= sizeof(*hdr
);
561 err
= p54u_bulk_msg(priv
, P54U_PIPE_DATA
, buf
, block_size
);
563 dev_err(&priv
->udev
->dev
, "(p54usb) firmware "
565 goto err_upload_failed
;
569 left
= block_size
= min((unsigned int)P54U_FW_BLOCK
, remains
);
572 *((__le32
*)buf
) = cpu_to_le32(~crc32_le(~0, priv
->fw
->data
,
574 err
= p54u_bulk_msg(priv
, P54U_PIPE_DATA
, buf
, sizeof(u32
));
576 dev_err(&priv
->udev
->dev
, "(p54usb) firmware upload failed!\n");
577 goto err_upload_failed
;
579 timeout
= jiffies
+ msecs_to_jiffies(1000);
580 while (!(err
= usb_bulk_msg(priv
->udev
,
581 usb_rcvbulkpipe(priv
->udev
, P54U_PIPE_DATA
), buf
, 128, &alen
, 1000))) {
582 if (alen
> 2 && !memcmp(buf
, "OK", 2))
585 if (alen
> 5 && !memcmp(buf
, "ERROR", 5)) {
590 if (time_after(jiffies
, timeout
)) {
591 dev_err(&priv
->udev
->dev
, "(p54usb) firmware boot "
598 dev_err(&priv
->udev
->dev
, "(p54usb) firmware upload failed!\n");
599 goto err_upload_failed
;
604 err
= p54u_bulk_msg(priv
, P54U_PIPE_DATA
, buf
, 2);
606 dev_err(&priv
->udev
->dev
, "(p54usb) firmware boot failed!\n");
607 goto err_upload_failed
;
610 timeout
= jiffies
+ msecs_to_jiffies(1000);
611 while (!(err
= usb_bulk_msg(priv
->udev
,
612 usb_rcvbulkpipe(priv
->udev
, P54U_PIPE_DATA
), buf
, 128, &alen
, 1000))) {
613 if (alen
> 0 && buf
[0] == 'g')
616 if (time_after(jiffies
, timeout
)) {
622 goto err_upload_failed
;
629 static int p54u_upload_firmware_net2280(struct ieee80211_hw
*dev
)
631 struct p54u_priv
*priv
= dev
->priv
;
632 const struct p54p_csr
*devreg
= (const struct p54p_csr
*) P54U_DEV_BASE
;
636 unsigned int remains
, offset
;
639 buf
= kmalloc(512, GFP_KERNEL
);
643 #define P54U_WRITE(type, addr, data) \
645 err = p54u_write(priv, buf, type,\
646 cpu_to_le32((u32)(unsigned long)addr), data);\
651 #define P54U_READ(type, addr) \
653 err = p54u_read(priv, buf, type,\
654 cpu_to_le32((u32)(unsigned long)addr), ®);\
659 /* power down net2280 bridge */
660 P54U_READ(NET2280_BRG_U32
, NET2280_GPIOCTL
);
661 reg
|= cpu_to_le32(P54U_BRG_POWER_DOWN
);
662 reg
&= cpu_to_le32(~P54U_BRG_POWER_UP
);
663 P54U_WRITE(NET2280_BRG_U32
, NET2280_GPIOCTL
, reg
);
667 /* power up bridge */
668 reg
|= cpu_to_le32(P54U_BRG_POWER_UP
);
669 reg
&= cpu_to_le32(~P54U_BRG_POWER_DOWN
);
670 P54U_WRITE(NET2280_BRG_U32
, NET2280_GPIOCTL
, reg
);
674 P54U_WRITE(NET2280_BRG_U32
, NET2280_DEVINIT
,
675 cpu_to_le32(NET2280_CLK_30Mhz
|
677 NET2280_PCI_SOFT_RESET
));
681 P54U_WRITE(NET2280_BRG_CFG_U16
, PCI_COMMAND
,
682 cpu_to_le32(PCI_COMMAND_MEMORY
|
683 PCI_COMMAND_MASTER
));
685 P54U_WRITE(NET2280_BRG_CFG_U32
, PCI_BASE_ADDRESS_0
,
686 cpu_to_le32(NET2280_BASE
));
688 P54U_READ(NET2280_BRG_CFG_U16
, PCI_STATUS
);
689 reg
|= cpu_to_le32(PCI_STATUS_REC_MASTER_ABORT
);
690 P54U_WRITE(NET2280_BRG_CFG_U16
, PCI_STATUS
, reg
);
692 // TODO: we really need this?
693 P54U_READ(NET2280_BRG_U32
, NET2280_RELNUM
);
695 P54U_WRITE(NET2280_BRG_U32
, NET2280_EPA_RSP
,
696 cpu_to_le32(NET2280_CLEAR_NAK_OUT_PACKETS_MODE
));
697 P54U_WRITE(NET2280_BRG_U32
, NET2280_EPC_RSP
,
698 cpu_to_le32(NET2280_CLEAR_NAK_OUT_PACKETS_MODE
));
700 P54U_WRITE(NET2280_BRG_CFG_U32
, PCI_BASE_ADDRESS_2
,
701 cpu_to_le32(NET2280_BASE2
));
703 /* finally done setting up the bridge */
705 P54U_WRITE(NET2280_DEV_CFG_U16
, 0x10000 | PCI_COMMAND
,
706 cpu_to_le32(PCI_COMMAND_MEMORY
|
707 PCI_COMMAND_MASTER
));
709 P54U_WRITE(NET2280_DEV_CFG_U16
, 0x10000 | 0x40 /* TRDY timeout */, 0);
710 P54U_WRITE(NET2280_DEV_CFG_U32
, 0x10000 | PCI_BASE_ADDRESS_0
,
711 cpu_to_le32(P54U_DEV_BASE
));
713 P54U_WRITE(NET2280_BRG_U32
, NET2280_USBIRQENB1
, 0);
714 P54U_WRITE(NET2280_BRG_U32
, NET2280_IRQSTAT1
,
715 cpu_to_le32(NET2280_PCI_INTA_INTERRUPT
));
718 P54U_WRITE(NET2280_DEV_U32
, &devreg
->int_enable
, 0);
720 P54U_READ(NET2280_DEV_U32
, &devreg
->ctrl_stat
);
721 reg
&= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET
);
722 reg
&= cpu_to_le32(~ISL38XX_CTRL_STAT_RAMBOOT
);
723 reg
&= cpu_to_le32(~ISL38XX_CTRL_STAT_CLKRUN
);
724 P54U_WRITE(NET2280_DEV_U32
, &devreg
->ctrl_stat
, reg
);
728 reg
|= cpu_to_le32(ISL38XX_CTRL_STAT_RESET
);
729 P54U_WRITE(NET2280_DEV_U32
, &devreg
->ctrl_stat
, reg
);
733 reg
&= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET
);
734 P54U_WRITE(NET2280_DEV_U32
, &devreg
->ctrl_stat
, reg
);
738 P54U_READ(NET2280_DEV_U32
, &devreg
->int_ident
);
739 P54U_WRITE(NET2280_DEV_U32
, &devreg
->int_ack
, reg
);
741 /* finally, we can upload firmware now! */
742 remains
= priv
->fw
->size
;
743 data
= priv
->fw
->data
;
744 offset
= ISL38XX_DEV_FIRMWARE_ADDR
;
747 unsigned int block_len
= min(remains
, (unsigned int)512);
748 memcpy(buf
, data
, block_len
);
750 err
= p54u_bulk_msg(priv
, P54U_PIPE_DATA
, buf
, block_len
);
752 dev_err(&priv
->udev
->dev
, "(p54usb) firmware block "
757 P54U_WRITE(NET2280_DEV_U32
, &devreg
->direct_mem_base
,
758 cpu_to_le32(0xc0000f00));
760 P54U_WRITE(NET2280_DEV_U32
,
761 0x0020 | (unsigned long)&devreg
->direct_mem_win
, 0);
762 P54U_WRITE(NET2280_DEV_U32
,
763 0x0020 | (unsigned long)&devreg
->direct_mem_win
,
766 P54U_WRITE(NET2280_DEV_U32
,
767 0x0024 | (unsigned long)&devreg
->direct_mem_win
,
768 cpu_to_le32(block_len
));
769 P54U_WRITE(NET2280_DEV_U32
,
770 0x0028 | (unsigned long)&devreg
->direct_mem_win
,
771 cpu_to_le32(offset
));
773 P54U_WRITE(NET2280_DEV_U32
, &devreg
->dma_addr
,
774 cpu_to_le32(NET2280_EPA_FIFO_PCI_ADDR
));
775 P54U_WRITE(NET2280_DEV_U32
, &devreg
->dma_len
,
776 cpu_to_le32(block_len
>> 2));
777 P54U_WRITE(NET2280_DEV_U32
, &devreg
->dma_ctrl
,
778 cpu_to_le32(ISL38XX_DMA_MASTER_CONTROL_TRIGGER
));
782 P54U_READ(NET2280_DEV_U32
,
783 0x002C | (unsigned long)&devreg
->direct_mem_win
);
784 if (!(reg
& cpu_to_le32(ISL38XX_DMA_STATUS_DONE
)) ||
785 !(reg
& cpu_to_le32(ISL38XX_DMA_STATUS_READY
))) {
786 dev_err(&priv
->udev
->dev
, "(p54usb) firmware DMA "
787 "transfer failed\n");
791 P54U_WRITE(NET2280_BRG_U32
, NET2280_EPA_STAT
,
792 cpu_to_le32(NET2280_FIFO_FLUSH
));
794 remains
-= block_len
;
800 P54U_READ(NET2280_DEV_U32
, &devreg
->ctrl_stat
);
801 reg
&= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET
);
802 reg
&= cpu_to_le32(~ISL38XX_CTRL_STAT_CLKRUN
);
803 reg
|= cpu_to_le32(ISL38XX_CTRL_STAT_RAMBOOT
);
804 P54U_WRITE(NET2280_DEV_U32
, &devreg
->ctrl_stat
, reg
);
808 reg
|= cpu_to_le32(ISL38XX_CTRL_STAT_RESET
);
809 P54U_WRITE(NET2280_DEV_U32
, &devreg
->ctrl_stat
, reg
);
811 reg
&= cpu_to_le32(~ISL38XX_CTRL_STAT_RESET
);
812 P54U_WRITE(NET2280_DEV_U32
, &devreg
->ctrl_stat
, reg
);
816 P54U_READ(NET2280_DEV_U32
, &devreg
->int_ident
);
817 P54U_WRITE(NET2280_DEV_U32
, &devreg
->int_ack
, reg
);
819 /* start up the firmware */
820 P54U_WRITE(NET2280_DEV_U32
, &devreg
->int_enable
,
821 cpu_to_le32(ISL38XX_INT_IDENT_INIT
));
823 P54U_WRITE(NET2280_BRG_U32
, NET2280_IRQSTAT1
,
824 cpu_to_le32(NET2280_PCI_INTA_INTERRUPT
));
826 P54U_WRITE(NET2280_BRG_U32
, NET2280_USBIRQENB1
,
827 cpu_to_le32(NET2280_PCI_INTA_INTERRUPT_ENABLE
|
828 NET2280_USB_INTERRUPT_ENABLE
));
830 P54U_WRITE(NET2280_DEV_U32
, &devreg
->dev_int
,
831 cpu_to_le32(ISL38XX_DEV_INT_RESET
));
833 err
= usb_interrupt_msg(priv
->udev
,
834 usb_rcvbulkpipe(priv
->udev
, P54U_PIPE_INT
),
835 buf
, sizeof(__le32
), &alen
, 1000);
836 if (err
|| alen
!= sizeof(__le32
))
839 P54U_READ(NET2280_DEV_U32
, &devreg
->int_ident
);
840 P54U_WRITE(NET2280_DEV_U32
, &devreg
->int_ack
, reg
);
842 if (!(reg
& cpu_to_le32(ISL38XX_INT_IDENT_INIT
)))
845 P54U_WRITE(NET2280_BRG_U32
, NET2280_USBIRQENB1
, 0);
846 P54U_WRITE(NET2280_BRG_U32
, NET2280_IRQSTAT1
,
847 cpu_to_le32(NET2280_PCI_INTA_INTERRUPT
));
857 static int p54_find_type(struct p54u_priv
*priv
)
861 for (i
= 0; i
< __NUM_P54U_HWTYPES
; i
++)
862 if (p54u_fwlist
[i
].type
== priv
->hw_type
)
864 if (i
== __NUM_P54U_HWTYPES
)
870 static int p54u_start_ops(struct p54u_priv
*priv
)
872 struct ieee80211_hw
*dev
= priv
->common
.hw
;
875 ret
= p54_parse_firmware(dev
, priv
->fw
);
879 ret
= p54_find_type(priv
);
883 if (priv
->common
.fw_interface
!= p54u_fwlist
[ret
].intf
) {
884 dev_err(&priv
->udev
->dev
, "wrong firmware, please get "
885 "a firmware for \"%s\" and try again.\n",
886 p54u_fwlist
[ret
].hw
);
891 ret
= priv
->upload_fw(dev
);
895 ret
= p54u_open(dev
);
899 ret
= p54_read_eeprom(dev
);
905 ret
= p54_register_common(dev
, &priv
->udev
->dev
);
916 * p54u_disconnect will do the rest of the
922 static void p54u_load_firmware_cb(const struct firmware
*firmware
,
925 struct p54u_priv
*priv
= context
;
926 struct usb_device
*udev
= priv
->udev
;
927 struct usb_interface
*intf
= priv
->intf
;
932 err
= p54u_start_ops(priv
);
935 dev_err(&udev
->dev
, "Firmware not found.\n");
938 complete(&priv
->fw_wait_load
);
940 * At this point p54u_disconnect may have already freed
941 * the "priv" context. Do not use it anymore!
946 dev_err(&intf
->dev
, "failed to initialize device (%d)\n", err
);
948 usb_lock_device(udev
);
949 usb_driver_release_interface(&p54u_driver
, intf
);
950 usb_unlock_device(udev
);
956 static int p54u_load_firmware(struct ieee80211_hw
*dev
,
957 struct usb_interface
*intf
)
959 struct usb_device
*udev
= interface_to_usbdev(intf
);
960 struct p54u_priv
*priv
= dev
->priv
;
961 struct device
*device
= &udev
->dev
;
964 BUILD_BUG_ON(ARRAY_SIZE(p54u_fwlist
) != __NUM_P54U_HWTYPES
);
966 init_completion(&priv
->fw_wait_load
);
967 i
= p54_find_type(priv
);
971 dev_info(&priv
->udev
->dev
, "Loading firmware file %s\n",
975 err
= request_firmware_nowait(THIS_MODULE
, 1, p54u_fwlist
[i
].fw
,
976 device
, GFP_KERNEL
, priv
,
977 p54u_load_firmware_cb
);
979 dev_err(&priv
->udev
->dev
, "(p54usb) cannot load firmware %s "
980 "(%d)!\n", p54u_fwlist
[i
].fw
, err
);
987 static int p54u_probe(struct usb_interface
*intf
,
988 const struct usb_device_id
*id
)
990 struct usb_device
*udev
= interface_to_usbdev(intf
);
991 struct ieee80211_hw
*dev
;
992 struct p54u_priv
*priv
;
994 unsigned int i
, recognized_pipes
;
996 dev
= p54_init_common(sizeof(*priv
));
999 dev_err(&udev
->dev
, "(p54usb) ieee80211 alloc failed\n");
1004 priv
->hw_type
= P54U_INVALID_HW
;
1006 SET_IEEE80211_DEV(dev
, &intf
->dev
);
1007 usb_set_intfdata(intf
, dev
);
1010 skb_queue_head_init(&priv
->rx_queue
);
1011 init_usb_anchor(&priv
->submitted
);
1013 /* really lazy and simple way of figuring out if we're a 3887 */
1014 /* TODO: should just stick the identification in the device table */
1015 i
= intf
->altsetting
->desc
.bNumEndpoints
;
1016 recognized_pipes
= 0;
1018 switch (intf
->altsetting
->endpoint
[i
].desc
.bEndpointAddress
) {
1019 case P54U_PIPE_DATA
:
1020 case P54U_PIPE_MGMT
:
1023 case P54U_PIPE_DATA
| USB_DIR_IN
:
1024 case P54U_PIPE_MGMT
| USB_DIR_IN
:
1025 case P54U_PIPE_BRG
| USB_DIR_IN
:
1026 case P54U_PIPE_DEV
| USB_DIR_IN
:
1027 case P54U_PIPE_INT
| USB_DIR_IN
:
1031 priv
->common
.open
= p54u_open
;
1032 priv
->common
.stop
= p54u_stop
;
1033 if (recognized_pipes
< P54U_PIPE_NUMBER
) {
1035 /* ISL3887 needs a full reset on resume */
1036 udev
->reset_resume
= 1;
1037 #endif /* CONFIG_PM */
1038 err
= p54u_device_reset(dev
);
1040 priv
->hw_type
= P54U_3887
;
1041 dev
->extra_tx_headroom
+= sizeof(struct lm87_tx_hdr
);
1042 priv
->common
.tx_hdr_len
= sizeof(struct lm87_tx_hdr
);
1043 priv
->common
.tx
= p54u_tx_lm87
;
1044 priv
->upload_fw
= p54u_upload_firmware_3887
;
1046 priv
->hw_type
= P54U_NET2280
;
1047 dev
->extra_tx_headroom
+= sizeof(struct net2280_tx_hdr
);
1048 priv
->common
.tx_hdr_len
= sizeof(struct net2280_tx_hdr
);
1049 priv
->common
.tx
= p54u_tx_net2280
;
1050 priv
->upload_fw
= p54u_upload_firmware_net2280
;
1052 err
= p54u_load_firmware(dev
, intf
);
1054 p54_free_common(dev
);
1058 static void p54u_disconnect(struct usb_interface
*intf
)
1060 struct ieee80211_hw
*dev
= usb_get_intfdata(intf
);
1061 struct p54u_priv
*priv
;
1067 wait_for_completion(&priv
->fw_wait_load
);
1068 p54_unregister_common(dev
);
1070 release_firmware(priv
->fw
);
1071 p54_free_common(dev
);
1074 static int p54u_pre_reset(struct usb_interface
*intf
)
1076 struct ieee80211_hw
*dev
= usb_get_intfdata(intf
);
1085 static int p54u_resume(struct usb_interface
*intf
)
1087 struct ieee80211_hw
*dev
= usb_get_intfdata(intf
);
1088 struct p54u_priv
*priv
;
1094 if (unlikely(!(priv
->upload_fw
&& priv
->fw
)))
1097 return priv
->upload_fw(dev
);
1100 static int p54u_post_reset(struct usb_interface
*intf
)
1102 struct ieee80211_hw
*dev
= usb_get_intfdata(intf
);
1103 struct p54u_priv
*priv
;
1106 err
= p54u_resume(intf
);
1110 /* reinitialize old device state */
1112 if (priv
->common
.mode
!= NL80211_IFTYPE_UNSPECIFIED
)
1113 ieee80211_restart_hw(dev
);
1120 static int p54u_suspend(struct usb_interface
*intf
, pm_message_t message
)
1122 return p54u_pre_reset(intf
);
1125 #endif /* CONFIG_PM */
1127 static struct usb_driver p54u_driver
= {
1129 .id_table
= p54u_table
,
1130 .probe
= p54u_probe
,
1131 .disconnect
= p54u_disconnect
,
1132 .pre_reset
= p54u_pre_reset
,
1133 .post_reset
= p54u_post_reset
,
1135 .suspend
= p54u_suspend
,
1136 .resume
= p54u_resume
,
1137 .reset_resume
= p54u_resume
,
1138 #endif /* CONFIG_PM */
1140 .disable_hub_initiated_lpm
= 1,
1143 module_usb_driver(p54u_driver
);