2 * This file is part of wl1251
4 * Copyright (C) 2008-2009 Nokia Corporation
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * version 2 as published by the Free Software Foundation.
10 * This program is distributed in the hope that it will be useful, but
11 * WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
13 * General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
22 #include <linux/module.h>
23 #include <linux/interrupt.h>
24 #include <linux/firmware.h>
25 #include <linux/delay.h>
26 #include <linux/irq.h>
27 #include <linux/crc32.h>
28 #include <linux/etherdevice.h>
29 #include <linux/vmalloc.h>
30 #include <linux/slab.h>
31 #include <linux/netdevice.h>
34 #include "wl12xx_80211.h"
46 void wl1251_enable_interrupts(struct wl1251
*wl
)
48 wl
->if_ops
->enable_irq(wl
);
51 void wl1251_disable_interrupts(struct wl1251
*wl
)
53 wl
->if_ops
->disable_irq(wl
);
56 static int wl1251_power_off(struct wl1251
*wl
)
58 return wl
->if_ops
->power(wl
, false);
61 static int wl1251_power_on(struct wl1251
*wl
)
63 return wl
->if_ops
->power(wl
, true);
66 static int wl1251_fetch_firmware(struct wl1251
*wl
)
68 const struct firmware
*fw
;
69 struct device
*dev
= wiphy_dev(wl
->hw
->wiphy
);
72 ret
= request_firmware(&fw
, WL1251_FW_NAME
, dev
);
75 wl1251_error("could not get firmware: %d", ret
);
80 wl1251_error("firmware size is not multiple of 32 bits: %zu",
86 wl
->fw_len
= fw
->size
;
87 wl
->fw
= vmalloc(wl
->fw_len
);
90 wl1251_error("could not allocate memory for the firmware");
95 memcpy(wl
->fw
, fw
->data
, wl
->fw_len
);
100 release_firmware(fw
);
105 static int wl1251_fetch_nvs(struct wl1251
*wl
)
107 const struct firmware
*fw
;
108 struct device
*dev
= wiphy_dev(wl
->hw
->wiphy
);
111 ret
= request_firmware(&fw
, WL1251_NVS_NAME
, dev
);
114 wl1251_error("could not get nvs file: %d", ret
);
119 wl1251_error("nvs size is not multiple of 32 bits: %zu",
125 wl
->nvs
= kmemdup(fw
->data
, fw
->size
, GFP_KERNEL
);
128 wl1251_error("could not allocate memory for the nvs file");
133 wl
->nvs_len
= fw
->size
;
138 release_firmware(fw
);
143 static void wl1251_fw_wakeup(struct wl1251
*wl
)
147 elp_reg
= ELPCTRL_WAKE_UP
;
148 wl1251_write_elp(wl
, HW_ACCESS_ELP_CTRL_REG_ADDR
, elp_reg
);
149 elp_reg
= wl1251_read_elp(wl
, HW_ACCESS_ELP_CTRL_REG_ADDR
);
151 if (!(elp_reg
& ELPCTRL_WLAN_READY
))
152 wl1251_warning("WLAN not ready");
155 static int wl1251_chip_wakeup(struct wl1251
*wl
)
159 ret
= wl1251_power_on(wl
);
163 msleep(WL1251_POWER_ON_SLEEP
);
164 wl
->if_ops
->reset(wl
);
166 /* We don't need a real memory partition here, because we only want
167 * to use the registers at this point. */
168 wl1251_set_partition(wl
,
172 REGISTERS_DOWN_SIZE
);
174 /* ELP module wake up */
175 wl1251_fw_wakeup(wl
);
177 /* whal_FwCtrl_BootSm() */
179 /* 0. read chip id from CHIP_ID */
180 wl
->chip_id
= wl1251_reg_read32(wl
, CHIP_ID_B
);
182 /* 1. check if chip id is valid */
184 switch (wl
->chip_id
) {
185 case CHIP_ID_1251_PG12
:
186 wl1251_debug(DEBUG_BOOT
, "chip id 0x%x (1251 PG12)",
189 case CHIP_ID_1251_PG11
:
190 wl1251_debug(DEBUG_BOOT
, "chip id 0x%x (1251 PG11)",
193 case CHIP_ID_1251_PG10
:
195 wl1251_error("unsupported chip id: 0x%x", wl
->chip_id
);
200 if (wl
->fw
== NULL
) {
201 ret
= wl1251_fetch_firmware(wl
);
210 #define WL1251_IRQ_LOOP_COUNT 10
211 static void wl1251_irq_work(struct work_struct
*work
)
213 u32 intr
, ctr
= WL1251_IRQ_LOOP_COUNT
;
215 container_of(work
, struct wl1251
, irq_work
);
218 mutex_lock(&wl
->mutex
);
220 wl1251_debug(DEBUG_IRQ
, "IRQ work");
222 if (wl
->state
== WL1251_STATE_OFF
)
225 ret
= wl1251_ps_elp_wakeup(wl
);
229 wl1251_reg_write32(wl
, ACX_REG_INTERRUPT_MASK
, WL1251_ACX_INTR_ALL
);
231 intr
= wl1251_reg_read32(wl
, ACX_REG_INTERRUPT_CLEAR
);
232 wl1251_debug(DEBUG_IRQ
, "intr: 0x%x", intr
);
236 wl
->rx_counter
= wl1251_mem_read32(
237 wl
, wl
->data_path
->rx_control_addr
);
239 /* We handle a frmware bug here */
240 switch ((wl
->rx_counter
- wl
->rx_handled
) & 0xf) {
242 wl1251_debug(DEBUG_IRQ
,
243 "RX: FW and host in sync");
244 intr
&= ~WL1251_ACX_INTR_RX0_DATA
;
245 intr
&= ~WL1251_ACX_INTR_RX1_DATA
;
248 wl1251_debug(DEBUG_IRQ
, "RX: FW +1");
249 intr
|= WL1251_ACX_INTR_RX0_DATA
;
250 intr
&= ~WL1251_ACX_INTR_RX1_DATA
;
253 wl1251_debug(DEBUG_IRQ
, "RX: FW +2");
254 intr
|= WL1251_ACX_INTR_RX0_DATA
;
255 intr
|= WL1251_ACX_INTR_RX1_DATA
;
259 "RX: FW and host out of sync: %d",
260 wl
->rx_counter
- wl
->rx_handled
);
264 wl
->rx_handled
= wl
->rx_counter
;
266 wl1251_debug(DEBUG_IRQ
, "RX counter: %d",
270 intr
&= wl
->intr_mask
;
273 wl1251_debug(DEBUG_IRQ
, "INTR is 0");
277 if (intr
& WL1251_ACX_INTR_RX0_DATA
) {
278 wl1251_debug(DEBUG_IRQ
, "WL1251_ACX_INTR_RX0_DATA");
282 if (intr
& WL1251_ACX_INTR_RX1_DATA
) {
283 wl1251_debug(DEBUG_IRQ
, "WL1251_ACX_INTR_RX1_DATA");
287 if (intr
& WL1251_ACX_INTR_TX_RESULT
) {
288 wl1251_debug(DEBUG_IRQ
, "WL1251_ACX_INTR_TX_RESULT");
289 wl1251_tx_complete(wl
);
292 if (intr
& WL1251_ACX_INTR_EVENT_A
) {
293 wl1251_debug(DEBUG_IRQ
, "WL1251_ACX_INTR_EVENT_A");
294 wl1251_event_handle(wl
, 0);
297 if (intr
& WL1251_ACX_INTR_EVENT_B
) {
298 wl1251_debug(DEBUG_IRQ
, "WL1251_ACX_INTR_EVENT_B");
299 wl1251_event_handle(wl
, 1);
302 if (intr
& WL1251_ACX_INTR_INIT_COMPLETE
)
303 wl1251_debug(DEBUG_IRQ
,
304 "WL1251_ACX_INTR_INIT_COMPLETE");
309 intr
= wl1251_reg_read32(wl
, ACX_REG_INTERRUPT_CLEAR
);
313 wl1251_reg_write32(wl
, ACX_REG_INTERRUPT_MASK
, ~(wl
->intr_mask
));
314 wl1251_ps_elp_sleep(wl
);
317 mutex_unlock(&wl
->mutex
);
320 static int wl1251_join(struct wl1251
*wl
, u8 bss_type
, u8 channel
,
321 u16 beacon_interval
, u8 dtim_period
)
325 ret
= wl1251_acx_frame_rates(wl
, DEFAULT_HW_GEN_TX_RATE
,
326 DEFAULT_HW_GEN_MODULATION_TYPE
,
327 wl
->tx_mgmt_frm_rate
,
328 wl
->tx_mgmt_frm_mod
);
333 * Join command applies filters, and if we are not associated,
334 * BSSID filter must be disabled for association to work.
336 if (is_zero_ether_addr(wl
->bssid
))
337 wl
->rx_config
&= ~CFG_BSSID_FILTER_EN
;
339 ret
= wl1251_cmd_join(wl
, bss_type
, channel
, beacon_interval
,
344 ret
= wl1251_event_wait(wl
, JOIN_EVENT_COMPLETE_ID
, 100);
346 wl1251_warning("join timeout");
352 static void wl1251_op_tx(struct ieee80211_hw
*hw
,
353 struct ieee80211_tx_control
*control
,
356 struct wl1251
*wl
= hw
->priv
;
359 skb_queue_tail(&wl
->tx_queue
, skb
);
362 * The chip specific setup must run before the first TX packet -
363 * before that, the tx_work will not be initialized!
366 ieee80211_queue_work(wl
->hw
, &wl
->tx_work
);
369 * The workqueue is slow to process the tx_queue and we need stop
370 * the queue here, otherwise the queue will get too long.
372 if (skb_queue_len(&wl
->tx_queue
) >= WL1251_TX_QUEUE_HIGH_WATERMARK
) {
373 wl1251_debug(DEBUG_TX
, "op_tx: tx_queue full, stop queues");
375 spin_lock_irqsave(&wl
->wl_lock
, flags
);
376 ieee80211_stop_queues(wl
->hw
);
377 wl
->tx_queue_stopped
= true;
378 spin_unlock_irqrestore(&wl
->wl_lock
, flags
);
382 static int wl1251_op_start(struct ieee80211_hw
*hw
)
384 struct wl1251
*wl
= hw
->priv
;
385 struct wiphy
*wiphy
= hw
->wiphy
;
388 wl1251_debug(DEBUG_MAC80211
, "mac80211 start");
390 mutex_lock(&wl
->mutex
);
392 if (wl
->state
!= WL1251_STATE_OFF
) {
393 wl1251_error("cannot start because not in off state: %d",
399 ret
= wl1251_chip_wakeup(wl
);
403 ret
= wl1251_boot(wl
);
407 ret
= wl1251_hw_init(wl
);
411 ret
= wl1251_acx_station_id(wl
);
415 wl
->state
= WL1251_STATE_ON
;
417 wl1251_info("firmware booted (%s)", wl
->fw_ver
);
419 /* update hw/fw version info in wiphy struct */
420 wiphy
->hw_version
= wl
->chip_id
;
421 strncpy(wiphy
->fw_version
, wl
->fw_ver
, sizeof(wiphy
->fw_version
));
425 wl1251_power_off(wl
);
427 mutex_unlock(&wl
->mutex
);
432 static void wl1251_op_stop(struct ieee80211_hw
*hw
)
434 struct wl1251
*wl
= hw
->priv
;
438 wl1251_debug(DEBUG_MAC80211
, "mac80211 stop");
440 mutex_lock(&wl
->mutex
);
442 WARN_ON(wl
->state
!= WL1251_STATE_ON
);
445 struct cfg80211_scan_info info
= {
449 ieee80211_scan_completed(wl
->hw
, &info
);
450 wl
->scanning
= false;
453 wl
->state
= WL1251_STATE_OFF
;
455 wl1251_disable_interrupts(wl
);
457 mutex_unlock(&wl
->mutex
);
459 cancel_work_sync(&wl
->irq_work
);
460 cancel_work_sync(&wl
->tx_work
);
461 cancel_delayed_work_sync(&wl
->elp_work
);
463 mutex_lock(&wl
->mutex
);
465 /* let's notify MAC80211 about the remaining pending TX frames */
467 wl1251_power_off(wl
);
469 eth_zero_addr(wl
->bssid
);
471 wl
->bss_type
= MAX_BSS_TYPE
;
473 wl
->data_in_count
= 0;
476 wl
->rx_current_buffer
= 0;
478 wl
->next_tx_complete
= 0;
480 wl
->station_mode
= STATION_ACTIVE_MODE
;
481 wl
->psm_entry_retry
= 0;
482 wl
->tx_queue_stopped
= false;
483 wl
->power_level
= WL1251_DEFAULT_POWER_LEVEL
;
485 wl
->channel
= WL1251_DEFAULT_CHANNEL
;
486 wl
->monitor_present
= false;
489 wl1251_debugfs_reset(wl
);
491 mutex_unlock(&wl
->mutex
);
494 static int wl1251_op_add_interface(struct ieee80211_hw
*hw
,
495 struct ieee80211_vif
*vif
)
497 struct wl1251
*wl
= hw
->priv
;
500 vif
->driver_flags
|= IEEE80211_VIF_BEACON_FILTER
|
501 IEEE80211_VIF_SUPPORTS_UAPSD
|
502 IEEE80211_VIF_SUPPORTS_CQM_RSSI
;
504 wl1251_debug(DEBUG_MAC80211
, "mac80211 add interface type %d mac %pM",
505 vif
->type
, vif
->addr
);
507 mutex_lock(&wl
->mutex
);
516 case NL80211_IFTYPE_STATION
:
517 wl
->bss_type
= BSS_TYPE_STA_BSS
;
519 case NL80211_IFTYPE_ADHOC
:
520 wl
->bss_type
= BSS_TYPE_IBSS
;
527 if (!ether_addr_equal_unaligned(wl
->mac_addr
, vif
->addr
)) {
528 memcpy(wl
->mac_addr
, vif
->addr
, ETH_ALEN
);
529 SET_IEEE80211_PERM_ADDR(wl
->hw
, wl
->mac_addr
);
530 ret
= wl1251_acx_station_id(wl
);
536 mutex_unlock(&wl
->mutex
);
540 static void wl1251_op_remove_interface(struct ieee80211_hw
*hw
,
541 struct ieee80211_vif
*vif
)
543 struct wl1251
*wl
= hw
->priv
;
545 mutex_lock(&wl
->mutex
);
546 wl1251_debug(DEBUG_MAC80211
, "mac80211 remove interface");
548 eth_zero_addr(wl
->bssid
);
549 mutex_unlock(&wl
->mutex
);
552 static int wl1251_build_null_data(struct wl1251
*wl
)
554 struct sk_buff
*skb
= NULL
;
559 if (wl
->bss_type
== BSS_TYPE_IBSS
) {
560 size
= sizeof(struct wl12xx_null_data_template
);
563 skb
= ieee80211_nullfunc_get(wl
->hw
, wl
->vif
, false);
570 ret
= wl1251_cmd_template_set(wl
, CMD_NULL_DATA
, ptr
, size
);
575 wl1251_warning("cmd buld null data failed: %d", ret
);
580 static int wl1251_build_qos_null_data(struct wl1251
*wl
)
582 struct ieee80211_qos_hdr
template;
584 memset(&template, 0, sizeof(template));
586 memcpy(template.addr1
, wl
->bssid
, ETH_ALEN
);
587 memcpy(template.addr2
, wl
->mac_addr
, ETH_ALEN
);
588 memcpy(template.addr3
, wl
->bssid
, ETH_ALEN
);
590 template.frame_control
= cpu_to_le16(IEEE80211_FTYPE_DATA
|
591 IEEE80211_STYPE_QOS_NULLFUNC
|
592 IEEE80211_FCTL_TODS
);
594 /* FIXME: not sure what priority to use here */
595 template.qos_ctrl
= cpu_to_le16(0);
597 return wl1251_cmd_template_set(wl
, CMD_QOS_NULL_DATA
, &template,
601 static bool wl1251_can_do_pm(struct ieee80211_conf
*conf
, struct wl1251
*wl
)
603 return (conf
->flags
& IEEE80211_CONF_PS
) && !wl
->monitor_present
;
606 static int wl1251_op_config(struct ieee80211_hw
*hw
, u32 changed
)
608 struct wl1251
*wl
= hw
->priv
;
609 struct ieee80211_conf
*conf
= &hw
->conf
;
610 int channel
, ret
= 0;
612 channel
= ieee80211_frequency_to_channel(
613 conf
->chandef
.chan
->center_freq
);
615 wl1251_debug(DEBUG_MAC80211
,
616 "mac80211 config ch %d monitor %s psm %s power %d",
618 conf
->flags
& IEEE80211_CONF_MONITOR
? "on" : "off",
619 conf
->flags
& IEEE80211_CONF_PS
? "on" : "off",
622 mutex_lock(&wl
->mutex
);
624 ret
= wl1251_ps_elp_wakeup(wl
);
628 if (changed
& IEEE80211_CONF_CHANGE_MONITOR
) {
631 if (conf
->flags
& IEEE80211_CONF_MONITOR
) {
632 wl
->monitor_present
= true;
633 mode
= DF_SNIFF_MODE_ENABLE
| DF_ENCRYPTION_DISABLE
;
635 wl
->monitor_present
= false;
639 ret
= wl1251_acx_feature_cfg(wl
, mode
);
644 if (channel
!= wl
->channel
) {
645 wl
->channel
= channel
;
648 * Use ENABLE_RX command for channel switching when no
649 * interface is present (monitor mode only).
650 * This leaves the tx path disabled in firmware, whereas
651 * the usual JOIN command seems to transmit some frames
654 if (wl
->vif
== NULL
) {
656 ret
= wl1251_cmd_data_path_rx(wl
, wl
->channel
, 1);
658 ret
= wl1251_join(wl
, wl
->bss_type
, wl
->channel
,
659 wl
->beacon_int
, wl
->dtim_period
);
665 if (wl1251_can_do_pm(conf
, wl
) && !wl
->psm_requested
) {
666 wl1251_debug(DEBUG_PSM
, "psm enabled");
668 wl
->psm_requested
= true;
670 wl
->dtim_period
= conf
->ps_dtim_period
;
672 ret
= wl1251_acx_wr_tbtt_and_dtim(wl
, wl
->beacon_int
,
676 * mac80211 enables PSM only if we're already associated.
678 ret
= wl1251_ps_set_mode(wl
, STATION_POWER_SAVE_MODE
);
681 } else if (!wl1251_can_do_pm(conf
, wl
) && wl
->psm_requested
) {
682 wl1251_debug(DEBUG_PSM
, "psm disabled");
684 wl
->psm_requested
= false;
686 if (wl
->station_mode
!= STATION_ACTIVE_MODE
) {
687 ret
= wl1251_ps_set_mode(wl
, STATION_ACTIVE_MODE
);
693 if (changed
& IEEE80211_CONF_CHANGE_IDLE
&& !wl
->scanning
) {
694 if (conf
->flags
& IEEE80211_CONF_IDLE
) {
695 ret
= wl1251_ps_set_mode(wl
, STATION_IDLE
);
699 ret
= wl1251_ps_set_mode(wl
, STATION_ACTIVE_MODE
);
702 ret
= wl1251_join(wl
, wl
->bss_type
, wl
->channel
,
703 wl
->beacon_int
, wl
->dtim_period
);
709 if (conf
->power_level
!= wl
->power_level
) {
710 ret
= wl1251_acx_tx_power(wl
, conf
->power_level
);
714 wl
->power_level
= conf
->power_level
;
718 wl1251_ps_elp_sleep(wl
);
721 mutex_unlock(&wl
->mutex
);
726 struct wl1251_filter_params
{
729 u8 mc_list
[ACX_MC_ADDRESS_GROUP_MAX
][ETH_ALEN
];
732 static u64
wl1251_op_prepare_multicast(struct ieee80211_hw
*hw
,
733 struct netdev_hw_addr_list
*mc_list
)
735 struct wl1251_filter_params
*fp
;
736 struct netdev_hw_addr
*ha
;
737 struct wl1251
*wl
= hw
->priv
;
739 if (unlikely(wl
->state
== WL1251_STATE_OFF
))
742 fp
= kzalloc(sizeof(*fp
), GFP_ATOMIC
);
744 wl1251_error("Out of memory setting filters.");
748 /* update multicast filtering parameters */
749 fp
->mc_list_length
= 0;
750 if (netdev_hw_addr_list_count(mc_list
) > ACX_MC_ADDRESS_GROUP_MAX
) {
754 netdev_hw_addr_list_for_each(ha
, mc_list
) {
755 memcpy(fp
->mc_list
[fp
->mc_list_length
],
757 fp
->mc_list_length
++;
761 return (u64
)(unsigned long)fp
;
764 #define WL1251_SUPPORTED_FILTERS (FIF_ALLMULTI | \
766 FIF_BCN_PRBRESP_PROMISC | \
771 static void wl1251_op_configure_filter(struct ieee80211_hw
*hw
,
772 unsigned int changed
,
773 unsigned int *total
, u64 multicast
)
775 struct wl1251_filter_params
*fp
= (void *)(unsigned long)multicast
;
776 struct wl1251
*wl
= hw
->priv
;
779 wl1251_debug(DEBUG_MAC80211
, "mac80211 configure filter");
781 *total
&= WL1251_SUPPORTED_FILTERS
;
782 changed
&= WL1251_SUPPORTED_FILTERS
;
785 /* no filters which we support changed */
790 mutex_lock(&wl
->mutex
);
792 wl
->rx_config
= WL1251_DEFAULT_RX_CONFIG
;
793 wl
->rx_filter
= WL1251_DEFAULT_RX_FILTER
;
795 if (*total
& FIF_ALLMULTI
)
797 * CFG_MC_FILTER_EN in rx_config needs to be 0 to receive
798 * all multicast frames
800 wl
->rx_config
&= ~CFG_MC_FILTER_EN
;
801 if (*total
& FIF_FCSFAIL
)
802 wl
->rx_filter
|= CFG_RX_FCS_ERROR
;
803 if (*total
& FIF_BCN_PRBRESP_PROMISC
) {
804 wl
->rx_config
&= ~CFG_BSSID_FILTER_EN
;
805 wl
->rx_config
&= ~CFG_SSID_FILTER_EN
;
807 if (*total
& FIF_CONTROL
)
808 wl
->rx_filter
|= CFG_RX_CTL_EN
;
809 if (*total
& FIF_OTHER_BSS
|| is_zero_ether_addr(wl
->bssid
))
810 wl
->rx_config
&= ~CFG_BSSID_FILTER_EN
;
811 if (*total
& FIF_PROBE_REQ
)
812 wl
->rx_filter
|= CFG_RX_PREQ_EN
;
814 if (wl
->state
== WL1251_STATE_OFF
)
817 ret
= wl1251_ps_elp_wakeup(wl
);
821 if (*total
& FIF_ALLMULTI
)
822 ret
= wl1251_acx_group_address_tbl(wl
, false, NULL
, 0);
824 ret
= wl1251_acx_group_address_tbl(wl
, fp
->enabled
,
830 /* send filters to firmware */
831 wl1251_acx_rx_config(wl
, wl
->rx_config
, wl
->rx_filter
);
833 wl1251_ps_elp_sleep(wl
);
836 mutex_unlock(&wl
->mutex
);
841 static int wl1251_set_key_type(struct wl1251
*wl
,
842 struct wl1251_cmd_set_keys
*key
,
843 enum set_key_cmd cmd
,
844 struct ieee80211_key_conf
*mac80211_key
,
847 switch (mac80211_key
->cipher
) {
848 case WLAN_CIPHER_SUITE_WEP40
:
849 case WLAN_CIPHER_SUITE_WEP104
:
850 if (is_broadcast_ether_addr(addr
))
851 key
->key_type
= KEY_WEP_DEFAULT
;
853 key
->key_type
= KEY_WEP_ADDR
;
855 mac80211_key
->hw_key_idx
= mac80211_key
->keyidx
;
857 case WLAN_CIPHER_SUITE_TKIP
:
858 if (is_broadcast_ether_addr(addr
))
859 key
->key_type
= KEY_TKIP_MIC_GROUP
;
861 key
->key_type
= KEY_TKIP_MIC_PAIRWISE
;
863 mac80211_key
->hw_key_idx
= mac80211_key
->keyidx
;
865 case WLAN_CIPHER_SUITE_CCMP
:
866 if (is_broadcast_ether_addr(addr
))
867 key
->key_type
= KEY_AES_GROUP
;
869 key
->key_type
= KEY_AES_PAIRWISE
;
870 mac80211_key
->flags
|= IEEE80211_KEY_FLAG_GENERATE_IV
;
873 wl1251_error("Unknown key cipher 0x%x", mac80211_key
->cipher
);
880 static int wl1251_op_set_key(struct ieee80211_hw
*hw
, enum set_key_cmd cmd
,
881 struct ieee80211_vif
*vif
,
882 struct ieee80211_sta
*sta
,
883 struct ieee80211_key_conf
*key
)
885 struct wl1251
*wl
= hw
->priv
;
886 struct wl1251_cmd_set_keys
*wl_cmd
;
890 static const u8 bcast_addr
[ETH_ALEN
] =
891 { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
893 wl1251_debug(DEBUG_MAC80211
, "mac80211 set key");
895 wl_cmd
= kzalloc(sizeof(*wl_cmd
), GFP_KERNEL
);
901 addr
= sta
? sta
->addr
: bcast_addr
;
903 wl1251_debug(DEBUG_CRYPT
, "CMD: 0x%x", cmd
);
904 wl1251_dump(DEBUG_CRYPT
, "ADDR: ", addr
, ETH_ALEN
);
905 wl1251_debug(DEBUG_CRYPT
, "Key: algo:0x%x, id:%d, len:%d flags 0x%x",
906 key
->cipher
, key
->keyidx
, key
->keylen
, key
->flags
);
907 wl1251_dump(DEBUG_CRYPT
, "KEY: ", key
->key
, key
->keylen
);
909 if (is_zero_ether_addr(addr
)) {
910 /* We dont support TX only encryption */
915 mutex_lock(&wl
->mutex
);
919 if (wl
->monitor_present
) {
923 wl_cmd
->key_action
= KEY_ADD_OR_REPLACE
;
926 wl_cmd
->key_action
= KEY_REMOVE
;
929 wl1251_error("Unsupported key cmd 0x%x", cmd
);
933 ret
= wl1251_ps_elp_wakeup(wl
);
937 ret
= wl1251_set_key_type(wl
, wl_cmd
, cmd
, key
, addr
);
939 wl1251_error("Set KEY type failed");
943 if (wl_cmd
->key_type
!= KEY_WEP_DEFAULT
)
944 memcpy(wl_cmd
->addr
, addr
, ETH_ALEN
);
946 if ((wl_cmd
->key_type
== KEY_TKIP_MIC_GROUP
) ||
947 (wl_cmd
->key_type
== KEY_TKIP_MIC_PAIRWISE
)) {
949 * We get the key in the following form:
950 * TKIP (16 bytes) - TX MIC (8 bytes) - RX MIC (8 bytes)
951 * but the target is expecting:
952 * TKIP - RX MIC - TX MIC
954 memcpy(wl_cmd
->key
, key
->key
, 16);
955 memcpy(wl_cmd
->key
+ 16, key
->key
+ 24, 8);
956 memcpy(wl_cmd
->key
+ 24, key
->key
+ 16, 8);
959 memcpy(wl_cmd
->key
, key
->key
, key
->keylen
);
961 wl_cmd
->key_size
= key
->keylen
;
963 wl_cmd
->id
= key
->keyidx
;
964 wl_cmd
->ssid_profile
= 0;
966 wl1251_dump(DEBUG_CRYPT
, "TARGET KEY: ", wl_cmd
, sizeof(*wl_cmd
));
968 ret
= wl1251_cmd_send(wl
, CMD_SET_KEYS
, wl_cmd
, sizeof(*wl_cmd
));
970 wl1251_warning("could not set keys");
975 wl1251_ps_elp_sleep(wl
);
978 mutex_unlock(&wl
->mutex
);
986 static int wl1251_op_hw_scan(struct ieee80211_hw
*hw
,
987 struct ieee80211_vif
*vif
,
988 struct ieee80211_scan_request
*hw_req
)
990 struct cfg80211_scan_request
*req
= &hw_req
->req
;
991 struct wl1251
*wl
= hw
->priv
;
997 wl1251_debug(DEBUG_MAC80211
, "mac80211 hw scan");
1000 ssid
= req
->ssids
[0].ssid
;
1001 ssid_len
= req
->ssids
[0].ssid_len
;
1004 mutex_lock(&wl
->mutex
);
1007 wl1251_debug(DEBUG_SCAN
, "scan already in progress");
1012 ret
= wl1251_ps_elp_wakeup(wl
);
1016 if (hw
->conf
.flags
& IEEE80211_CONF_IDLE
) {
1017 ret
= wl1251_ps_set_mode(wl
, STATION_ACTIVE_MODE
);
1020 ret
= wl1251_join(wl
, wl
->bss_type
, wl
->channel
,
1021 wl
->beacon_int
, wl
->dtim_period
);
1026 skb
= ieee80211_probereq_get(wl
->hw
, wl
->vif
->addr
, ssid
, ssid_len
,
1033 skb_put_data(skb
, req
->ie
, req
->ie_len
);
1035 ret
= wl1251_cmd_template_set(wl
, CMD_PROBE_REQ
, skb
->data
,
1041 ret
= wl1251_cmd_trigger_scan_to(wl
, 0);
1045 wl
->scanning
= true;
1047 ret
= wl1251_cmd_scan(wl
, ssid
, ssid_len
, req
->channels
,
1048 req
->n_channels
, WL1251_SCAN_NUM_PROBES
);
1050 wl1251_debug(DEBUG_SCAN
, "scan failed %d", ret
);
1051 wl
->scanning
= false;
1057 if (hw
->conf
.flags
& IEEE80211_CONF_IDLE
)
1058 ret
= wl1251_ps_set_mode(wl
, STATION_IDLE
);
1060 wl1251_ps_elp_sleep(wl
);
1063 mutex_unlock(&wl
->mutex
);
1068 static int wl1251_op_set_rts_threshold(struct ieee80211_hw
*hw
, u32 value
)
1070 struct wl1251
*wl
= hw
->priv
;
1073 mutex_lock(&wl
->mutex
);
1075 ret
= wl1251_ps_elp_wakeup(wl
);
1079 ret
= wl1251_acx_rts_threshold(wl
, (u16
) value
);
1081 wl1251_warning("wl1251_op_set_rts_threshold failed: %d", ret
);
1083 wl1251_ps_elp_sleep(wl
);
1086 mutex_unlock(&wl
->mutex
);
1091 static void wl1251_op_bss_info_changed(struct ieee80211_hw
*hw
,
1092 struct ieee80211_vif
*vif
,
1093 struct ieee80211_bss_conf
*bss_conf
,
1096 struct wl1251
*wl
= hw
->priv
;
1097 struct sk_buff
*beacon
, *skb
;
1101 wl1251_debug(DEBUG_MAC80211
, "mac80211 bss info changed");
1103 mutex_lock(&wl
->mutex
);
1105 ret
= wl1251_ps_elp_wakeup(wl
);
1109 if (changed
& BSS_CHANGED_CQM
) {
1110 ret
= wl1251_acx_low_rssi(wl
, bss_conf
->cqm_rssi_thold
,
1111 WL1251_DEFAULT_LOW_RSSI_WEIGHT
,
1112 WL1251_DEFAULT_LOW_RSSI_DEPTH
,
1113 WL1251_ACX_LOW_RSSI_TYPE_EDGE
);
1116 wl
->rssi_thold
= bss_conf
->cqm_rssi_thold
;
1119 if ((changed
& BSS_CHANGED_BSSID
) &&
1120 memcmp(wl
->bssid
, bss_conf
->bssid
, ETH_ALEN
)) {
1121 memcpy(wl
->bssid
, bss_conf
->bssid
, ETH_ALEN
);
1123 if (!is_zero_ether_addr(wl
->bssid
)) {
1124 ret
= wl1251_build_null_data(wl
);
1128 ret
= wl1251_build_qos_null_data(wl
);
1132 ret
= wl1251_join(wl
, wl
->bss_type
, wl
->channel
,
1133 wl
->beacon_int
, wl
->dtim_period
);
1139 if (changed
& BSS_CHANGED_ASSOC
) {
1140 if (bss_conf
->assoc
) {
1141 wl
->beacon_int
= bss_conf
->beacon_int
;
1143 skb
= ieee80211_pspoll_get(wl
->hw
, wl
->vif
);
1147 ret
= wl1251_cmd_template_set(wl
, CMD_PS_POLL
,
1154 ret
= wl1251_acx_aid(wl
, bss_conf
->aid
);
1158 /* use defaults when not associated */
1159 wl
->beacon_int
= WL1251_DEFAULT_BEACON_INT
;
1160 wl
->dtim_period
= WL1251_DEFAULT_DTIM_PERIOD
;
1163 if (changed
& BSS_CHANGED_ERP_SLOT
) {
1164 if (bss_conf
->use_short_slot
)
1165 ret
= wl1251_acx_slot(wl
, SLOT_TIME_SHORT
);
1167 ret
= wl1251_acx_slot(wl
, SLOT_TIME_LONG
);
1169 wl1251_warning("Set slot time failed %d", ret
);
1174 if (changed
& BSS_CHANGED_ERP_PREAMBLE
) {
1175 if (bss_conf
->use_short_preamble
)
1176 wl1251_acx_set_preamble(wl
, ACX_PREAMBLE_SHORT
);
1178 wl1251_acx_set_preamble(wl
, ACX_PREAMBLE_LONG
);
1181 if (changed
& BSS_CHANGED_ERP_CTS_PROT
) {
1182 if (bss_conf
->use_cts_prot
)
1183 ret
= wl1251_acx_cts_protect(wl
, CTSPROTECT_ENABLE
);
1185 ret
= wl1251_acx_cts_protect(wl
, CTSPROTECT_DISABLE
);
1187 wl1251_warning("Set ctsprotect failed %d", ret
);
1192 if (changed
& BSS_CHANGED_ARP_FILTER
) {
1193 __be32 addr
= bss_conf
->arp_addr_list
[0];
1194 WARN_ON(wl
->bss_type
!= BSS_TYPE_STA_BSS
);
1196 enable
= bss_conf
->arp_addr_cnt
== 1 && bss_conf
->assoc
;
1197 ret
= wl1251_acx_arp_ip_filter(wl
, enable
, addr
);
1202 if (changed
& BSS_CHANGED_BEACON
) {
1203 beacon
= ieee80211_beacon_get(hw
, vif
);
1207 ret
= wl1251_cmd_template_set(wl
, CMD_BEACON
, beacon
->data
,
1211 dev_kfree_skb(beacon
);
1215 ret
= wl1251_cmd_template_set(wl
, CMD_PROBE_RESP
, beacon
->data
,
1218 dev_kfree_skb(beacon
);
1223 ret
= wl1251_join(wl
, wl
->bss_type
, wl
->channel
,
1224 wl
->beacon_int
, wl
->dtim_period
);
1231 wl1251_ps_elp_sleep(wl
);
1234 mutex_unlock(&wl
->mutex
);
1238 /* can't be const, mac80211 writes to this */
1239 static struct ieee80211_rate wl1251_rates
[] = {
1242 .hw_value_short
= 0x1, },
1245 .hw_value_short
= 0x2,
1246 .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
1249 .hw_value_short
= 0x4,
1250 .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
1253 .hw_value_short
= 0x20,
1254 .flags
= IEEE80211_RATE_SHORT_PREAMBLE
},
1257 .hw_value_short
= 0x8, },
1260 .hw_value_short
= 0x10, },
1263 .hw_value_short
= 0x40, },
1266 .hw_value_short
= 0x80, },
1269 .hw_value_short
= 0x200, },
1272 .hw_value_short
= 0x400, },
1275 .hw_value_short
= 0x800, },
1278 .hw_value_short
= 0x1000, },
1281 /* can't be const, mac80211 writes to this */
1282 static struct ieee80211_channel wl1251_channels
[] = {
1283 { .hw_value
= 1, .center_freq
= 2412},
1284 { .hw_value
= 2, .center_freq
= 2417},
1285 { .hw_value
= 3, .center_freq
= 2422},
1286 { .hw_value
= 4, .center_freq
= 2427},
1287 { .hw_value
= 5, .center_freq
= 2432},
1288 { .hw_value
= 6, .center_freq
= 2437},
1289 { .hw_value
= 7, .center_freq
= 2442},
1290 { .hw_value
= 8, .center_freq
= 2447},
1291 { .hw_value
= 9, .center_freq
= 2452},
1292 { .hw_value
= 10, .center_freq
= 2457},
1293 { .hw_value
= 11, .center_freq
= 2462},
1294 { .hw_value
= 12, .center_freq
= 2467},
1295 { .hw_value
= 13, .center_freq
= 2472},
1298 static int wl1251_op_conf_tx(struct ieee80211_hw
*hw
,
1299 struct ieee80211_vif
*vif
, u16 queue
,
1300 const struct ieee80211_tx_queue_params
*params
)
1302 enum wl1251_acx_ps_scheme ps_scheme
;
1303 struct wl1251
*wl
= hw
->priv
;
1306 mutex_lock(&wl
->mutex
);
1308 wl1251_debug(DEBUG_MAC80211
, "mac80211 conf tx %d", queue
);
1310 ret
= wl1251_ps_elp_wakeup(wl
);
1314 /* mac80211 uses units of 32 usec */
1315 ret
= wl1251_acx_ac_cfg(wl
, wl1251_tx_get_queue(queue
),
1316 params
->cw_min
, params
->cw_max
,
1317 params
->aifs
, params
->txop
* 32);
1322 ps_scheme
= WL1251_ACX_PS_SCHEME_UPSD_TRIGGER
;
1324 ps_scheme
= WL1251_ACX_PS_SCHEME_LEGACY
;
1326 ret
= wl1251_acx_tid_cfg(wl
, wl1251_tx_get_queue(queue
),
1328 wl1251_tx_get_queue(queue
), ps_scheme
,
1329 WL1251_ACX_ACK_POLICY_LEGACY
);
1334 wl1251_ps_elp_sleep(wl
);
1337 mutex_unlock(&wl
->mutex
);
1342 static int wl1251_op_get_survey(struct ieee80211_hw
*hw
, int idx
,
1343 struct survey_info
*survey
)
1345 struct wl1251
*wl
= hw
->priv
;
1346 struct ieee80211_conf
*conf
= &hw
->conf
;
1351 survey
->channel
= conf
->chandef
.chan
;
1352 survey
->filled
= SURVEY_INFO_NOISE_DBM
;
1353 survey
->noise
= wl
->noise
;
1358 /* can't be const, mac80211 writes to this */
1359 static struct ieee80211_supported_band wl1251_band_2ghz
= {
1360 .channels
= wl1251_channels
,
1361 .n_channels
= ARRAY_SIZE(wl1251_channels
),
1362 .bitrates
= wl1251_rates
,
1363 .n_bitrates
= ARRAY_SIZE(wl1251_rates
),
1366 static const struct ieee80211_ops wl1251_ops
= {
1367 .start
= wl1251_op_start
,
1368 .stop
= wl1251_op_stop
,
1369 .add_interface
= wl1251_op_add_interface
,
1370 .remove_interface
= wl1251_op_remove_interface
,
1371 .config
= wl1251_op_config
,
1372 .prepare_multicast
= wl1251_op_prepare_multicast
,
1373 .configure_filter
= wl1251_op_configure_filter
,
1375 .set_key
= wl1251_op_set_key
,
1376 .hw_scan
= wl1251_op_hw_scan
,
1377 .bss_info_changed
= wl1251_op_bss_info_changed
,
1378 .set_rts_threshold
= wl1251_op_set_rts_threshold
,
1379 .conf_tx
= wl1251_op_conf_tx
,
1380 .get_survey
= wl1251_op_get_survey
,
1383 static int wl1251_read_eeprom_byte(struct wl1251
*wl
, off_t offset
, u8
*data
)
1385 unsigned long timeout
;
1387 wl1251_reg_write32(wl
, EE_ADDR
, offset
);
1388 wl1251_reg_write32(wl
, EE_CTL
, EE_CTL_READ
);
1390 /* EE_CTL_READ clears when data is ready */
1391 timeout
= jiffies
+ msecs_to_jiffies(100);
1393 if (!(wl1251_reg_read32(wl
, EE_CTL
) & EE_CTL_READ
))
1396 if (time_after(jiffies
, timeout
))
1402 *data
= wl1251_reg_read32(wl
, EE_DATA
);
1406 static int wl1251_read_eeprom(struct wl1251
*wl
, off_t offset
,
1407 u8
*data
, size_t len
)
1412 wl1251_reg_write32(wl
, EE_START
, 0);
1414 for (i
= 0; i
< len
; i
++) {
1415 ret
= wl1251_read_eeprom_byte(wl
, offset
+ i
, &data
[i
]);
1423 static int wl1251_read_eeprom_mac(struct wl1251
*wl
)
1428 wl1251_set_partition(wl
, 0, 0, REGISTERS_BASE
, REGISTERS_DOWN_SIZE
);
1430 ret
= wl1251_read_eeprom(wl
, 0x1c, mac
, sizeof(mac
));
1432 wl1251_warning("failed to read MAC address from EEPROM");
1436 /* MAC is stored in reverse order */
1437 for (i
= 0; i
< ETH_ALEN
; i
++)
1438 wl
->mac_addr
[i
] = mac
[ETH_ALEN
- i
- 1];
1443 #define NVS_OFF_MAC_LEN 0x19
1444 #define NVS_OFF_MAC_ADDR_LO 0x1a
1445 #define NVS_OFF_MAC_ADDR_HI 0x1b
1446 #define NVS_OFF_MAC_DATA 0x1c
1448 static int wl1251_check_nvs_mac(struct wl1251
*wl
)
1450 if (wl
->nvs_len
< 0x24)
1453 /* length is 2 and data address is 0x546c (ANDed with 0xfffe) */
1454 if (wl
->nvs
[NVS_OFF_MAC_LEN
] != 2 ||
1455 wl
->nvs
[NVS_OFF_MAC_ADDR_LO
] != 0x6d ||
1456 wl
->nvs
[NVS_OFF_MAC_ADDR_HI
] != 0x54)
1462 static int wl1251_read_nvs_mac(struct wl1251
*wl
)
1467 ret
= wl1251_check_nvs_mac(wl
);
1471 /* MAC is stored in reverse order */
1472 for (i
= 0; i
< ETH_ALEN
; i
++)
1473 mac
[i
] = wl
->nvs
[NVS_OFF_MAC_DATA
+ ETH_ALEN
- i
- 1];
1475 /* 00:00:20:07:03:09 is in example file wl1251-nvs.bin, so invalid */
1476 if (ether_addr_equal_unaligned(mac
, "\x00\x00\x20\x07\x03\x09"))
1479 memcpy(wl
->mac_addr
, mac
, ETH_ALEN
);
1483 static int wl1251_write_nvs_mac(struct wl1251
*wl
)
1487 ret
= wl1251_check_nvs_mac(wl
);
1491 /* MAC is stored in reverse order */
1492 for (i
= 0; i
< ETH_ALEN
; i
++)
1493 wl
->nvs
[NVS_OFF_MAC_DATA
+ i
] = wl
->mac_addr
[ETH_ALEN
- i
- 1];
1498 static int wl1251_register_hw(struct wl1251
*wl
)
1502 if (wl
->mac80211_registered
)
1505 SET_IEEE80211_PERM_ADDR(wl
->hw
, wl
->mac_addr
);
1507 ret
= ieee80211_register_hw(wl
->hw
);
1509 wl1251_error("unable to register mac80211 hw: %d", ret
);
1513 wl
->mac80211_registered
= true;
1515 wl1251_notice("loaded");
1520 int wl1251_init_ieee80211(struct wl1251
*wl
)
1524 /* The tx descriptor buffer and the TKIP space */
1525 wl
->hw
->extra_tx_headroom
= sizeof(struct tx_double_buffer_desc
)
1526 + WL1251_TKIP_IV_SPACE
;
1529 /* FIXME: find a proper value */
1531 ieee80211_hw_set(wl
->hw
, SIGNAL_DBM
);
1532 ieee80211_hw_set(wl
->hw
, SUPPORTS_PS
);
1534 wl
->hw
->wiphy
->interface_modes
= BIT(NL80211_IFTYPE_STATION
) |
1535 BIT(NL80211_IFTYPE_ADHOC
);
1536 wl
->hw
->wiphy
->max_scan_ssids
= 1;
1537 wl
->hw
->wiphy
->bands
[NL80211_BAND_2GHZ
] = &wl1251_band_2ghz
;
1541 if (wl
->nvs
== NULL
&& !wl
->use_eeprom
) {
1542 ret
= wl1251_fetch_nvs(wl
);
1548 ret
= wl1251_read_eeprom_mac(wl
);
1550 ret
= wl1251_read_nvs_mac(wl
);
1552 if (ret
== 0 && !is_valid_ether_addr(wl
->mac_addr
))
1557 * In case our MAC address is not correctly set,
1558 * we use a random but Nokia MAC.
1560 static const u8 nokia_oui
[3] = {0x00, 0x1f, 0xdf};
1561 memcpy(wl
->mac_addr
, nokia_oui
, 3);
1562 get_random_bytes(wl
->mac_addr
+ 3, 3);
1563 if (!wl
->use_eeprom
)
1564 wl1251_write_nvs_mac(wl
);
1565 wl1251_warning("MAC address in eeprom or nvs data is not valid");
1566 wl1251_warning("Setting random MAC address: %pM", wl
->mac_addr
);
1569 ret
= wl1251_register_hw(wl
);
1573 wl1251_debugfs_init(wl
);
1574 wl1251_notice("initialized");
1581 EXPORT_SYMBOL_GPL(wl1251_init_ieee80211
);
1583 struct ieee80211_hw
*wl1251_alloc_hw(void)
1585 struct ieee80211_hw
*hw
;
1589 hw
= ieee80211_alloc_hw(sizeof(*wl
), &wl1251_ops
);
1591 wl1251_error("could not alloc ieee80211_hw");
1592 return ERR_PTR(-ENOMEM
);
1596 memset(wl
, 0, sizeof(*wl
));
1600 wl
->data_in_count
= 0;
1602 skb_queue_head_init(&wl
->tx_queue
);
1604 INIT_DELAYED_WORK(&wl
->elp_work
, wl1251_elp_work
);
1605 wl
->channel
= WL1251_DEFAULT_CHANNEL
;
1606 wl
->monitor_present
= false;
1608 wl
->scanning
= false;
1609 wl
->bss_type
= MAX_BSS_TYPE
;
1610 wl
->default_key
= 0;
1614 wl
->rx_current_buffer
= 0;
1616 wl
->rx_config
= WL1251_DEFAULT_RX_CONFIG
;
1617 wl
->rx_filter
= WL1251_DEFAULT_RX_FILTER
;
1619 wl
->station_mode
= STATION_ACTIVE_MODE
;
1620 wl
->psm_requested
= false;
1621 wl
->psm_entry_retry
= 0;
1622 wl
->tx_queue_stopped
= false;
1623 wl
->power_level
= WL1251_DEFAULT_POWER_LEVEL
;
1625 wl
->beacon_int
= WL1251_DEFAULT_BEACON_INT
;
1626 wl
->dtim_period
= WL1251_DEFAULT_DTIM_PERIOD
;
1629 for (i
= 0; i
< FW_TX_CMPLT_BLOCK_SIZE
; i
++)
1630 wl
->tx_frames
[i
] = NULL
;
1632 wl
->next_tx_complete
= 0;
1634 INIT_WORK(&wl
->irq_work
, wl1251_irq_work
);
1635 INIT_WORK(&wl
->tx_work
, wl1251_tx_work
);
1637 wl
->state
= WL1251_STATE_OFF
;
1638 mutex_init(&wl
->mutex
);
1639 spin_lock_init(&wl
->wl_lock
);
1641 wl
->tx_mgmt_frm_rate
= DEFAULT_HW_GEN_TX_RATE
;
1642 wl
->tx_mgmt_frm_mod
= DEFAULT_HW_GEN_MODULATION_TYPE
;
1644 wl
->rx_descriptor
= kmalloc(sizeof(*wl
->rx_descriptor
), GFP_KERNEL
);
1645 if (!wl
->rx_descriptor
) {
1646 wl1251_error("could not allocate memory for rx descriptor");
1647 ieee80211_free_hw(hw
);
1648 return ERR_PTR(-ENOMEM
);
1653 EXPORT_SYMBOL_GPL(wl1251_alloc_hw
);
1655 int wl1251_free_hw(struct wl1251
*wl
)
1657 ieee80211_unregister_hw(wl
->hw
);
1659 wl1251_debugfs_exit(wl
);
1661 kfree(wl
->target_mem_map
);
1662 kfree(wl
->data_path
);
1668 kfree(wl
->rx_descriptor
);
1669 wl
->rx_descriptor
= NULL
;
1671 ieee80211_free_hw(wl
->hw
);
1675 EXPORT_SYMBOL_GPL(wl1251_free_hw
);
1677 MODULE_DESCRIPTION("TI wl1251 Wireless LAN Driver Core");
1678 MODULE_LICENSE("GPL");
1679 MODULE_AUTHOR("Kalle Valo <kvalo@adurom.com>");
1680 MODULE_FIRMWARE(WL1251_FW_NAME
);
1681 MODULE_FIRMWARE(WL1251_NVS_NAME
);