2 * TI TRF7970a RFID/NFC Transceiver Driver
4 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
6 * Author: Erick Macias <emacias@ti.com>
7 * Author: Felipe Balbi <balbi@ti.com>
8 * Author: Mark A. Greer <mgreer@animalcreek.com>
10 * This program is free software: you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 of
12 * the License as published by the Free Software Foundation.
15 #include <linux/module.h>
16 #include <linux/device.h>
17 #include <linux/netdevice.h>
18 #include <linux/interrupt.h>
19 #include <linux/pm_runtime.h>
20 #include <linux/nfc.h>
21 #include <linux/skbuff.h>
22 #include <linux/delay.h>
23 #include <linux/gpio/consumer.h>
25 #include <linux/spi/spi.h>
26 #include <linux/regulator/consumer.h>
28 #include <net/nfc/nfc.h>
29 #include <net/nfc/digital.h>
31 /* There are 3 ways the host can communicate with the trf7970a:
32 * parallel mode, SPI with Slave Select (SS) mode, and SPI without
33 * SS mode. The driver only supports the two SPI modes.
35 * The trf7970a is very timing sensitive and the VIN, EN2, and EN
36 * pins must asserted in that order and with specific delays in between.
37 * The delays used in the driver were provided by TI and have been
38 * confirmed to work with this driver. There is a bug with the current
39 * version of the trf7970a that requires that EN2 remain low no matter
40 * what. If it goes high, it will generate an RF field even when in
41 * passive target mode. TI has indicated that the chip will work okay
42 * when EN2 is left low. The 'en2-rf-quirk' device tree property
43 * indicates that trf7970a currently being used has the erratum and
44 * that EN2 must be kept low.
46 * Timeouts are implemented using the delayed workqueue kernel facility.
47 * Timeouts are required so things don't hang when there is no response
48 * from the trf7970a (or tag). Using this mechanism creates a race with
49 * interrupts, however. That is, an interrupt and a timeout could occur
50 * closely enough together that one is blocked by the mutex while the other
51 * executes. When the timeout handler executes first and blocks the
52 * interrupt handler, it will eventually set the state to IDLE so the
53 * interrupt handler will check the state and exit with no harm done.
54 * When the interrupt handler executes first and blocks the timeout handler,
55 * the cancel_delayed_work() call will know that it didn't cancel the
56 * work item (i.e., timeout) and will return zero. That return code is
57 * used by the timer handler to indicate that it should ignore the timeout
60 * Aborting an active command isn't as simple as it seems because the only
61 * way to abort a command that's already been sent to the tag is so turn
62 * off power to the tag. If we do that, though, we'd have to go through
63 * the entire anticollision procedure again but the digital layer doesn't
64 * support that. So, if an abort is received before trf7970a_send_cmd()
65 * has sent the command to the tag, it simply returns -ECANCELED. If the
66 * command has already been sent to the tag, then the driver continues
67 * normally and recieves the response data (or error) but just before
68 * sending the data upstream, it frees the rx_skb and sends -ECANCELED
69 * upstream instead. If the command failed, that error will be sent
72 * When recieving data from a tag and the interrupt status register has
73 * only the SRX bit set, it means that all of the data has been received
74 * (once what's in the fifo has been read). However, depending on timing
75 * an interrupt status with only the SRX bit set may not be recived. In
76 * those cases, the timeout mechanism is used to wait 20 ms in case more
77 * data arrives. After 20 ms, it is assumed that all of the data has been
78 * received and the accumulated rx data is sent upstream. The
79 * 'TRF7970A_ST_WAIT_FOR_RX_DATA_CONT' state is used for this purpose
80 * (i.e., it indicates that some data has been received but we're not sure
81 * if there is more coming so a timeout in this state means all data has
82 * been received and there isn't an error). The delay is 20 ms since delays
83 * of ~16 ms have been observed during testing.
85 * When transmitting a frame larger than the FIFO size (127 bytes), the
86 * driver will wait 20 ms for the FIFO to drain past the low-watermark
87 * and generate an interrupt. The low-watermark set to 32 bytes so the
88 * interrupt should fire after 127 - 32 = 95 bytes have been sent. At
89 * the lowest possible bit rate (6.62 kbps for 15693), it will take up
90 * to ~14.35 ms so 20 ms is used for the timeout.
92 * Type 2 write and sector select commands respond with a 4-bit ACK or NACK.
93 * Having only 4 bits in the FIFO won't normally generate an interrupt so
94 * driver enables the '4_bit_RX' bit of the Special Functions register 1
95 * to cause an interrupt in that case. Leaving that bit for a read command
96 * messes up the data returned so it is only enabled when the framing is
97 * 'NFC_DIGITAL_FRAMING_NFCA_T2T' and the command is not a read command.
98 * Unfortunately, that means that the driver has to peek into tx frames
99 * when the framing is 'NFC_DIGITAL_FRAMING_NFCA_T2T'. This is done by
100 * the trf7970a_per_cmd_config() routine.
102 * ISO/IEC 15693 frames specify whether to use single or double sub-carrier
103 * frequencies and whether to use low or high data rates in the flags byte
104 * of the frame. This means that the driver has to peek at all 15693 frames
105 * to determine what speed to set the communication to. In addition, write
106 * and lock commands use the OPTION flag to indicate that an EOF must be
107 * sent to the tag before it will send its response. So the driver has to
108 * examine all frames for that reason too.
110 * It is unclear how long to wait before sending the EOF. According to the
111 * Note under Table 1-1 in section 1.6 of
112 * http://www.ti.com/lit/ug/scbu011/scbu011.pdf, that wait should be at least
113 * 10 ms for TI Tag-it HF-I tags; however testing has shown that is not long
114 * enough so 20 ms is used. So the timer is set to 40 ms - 20 ms to drain
115 * up to 127 bytes in the FIFO at the lowest bit rate plus another 20 ms to
116 * ensure the wait is long enough before sending the EOF. This seems to work
120 #define TRF7970A_SUPPORTED_PROTOCOLS \
121 (NFC_PROTO_MIFARE_MASK | NFC_PROTO_ISO14443_MASK | \
122 NFC_PROTO_ISO14443_B_MASK | NFC_PROTO_FELICA_MASK | \
123 NFC_PROTO_ISO15693_MASK | NFC_PROTO_NFC_DEP_MASK)
125 #define TRF7970A_AUTOSUSPEND_DELAY 30000 /* 30 seconds */
126 #define TRF7970A_13MHZ_CLOCK_FREQUENCY 13560000
127 #define TRF7970A_27MHZ_CLOCK_FREQUENCY 27120000
129 #define TRF7970A_RX_SKB_ALLOC_SIZE 256
131 #define TRF7970A_FIFO_SIZE 127
133 /* TX length is 3 nibbles long ==> 4KB - 1 bytes max */
134 #define TRF7970A_TX_MAX (4096 - 1)
136 #define TRF7970A_WAIT_FOR_TX_IRQ 20
137 #define TRF7970A_WAIT_FOR_RX_DATA_TIMEOUT 20
138 #define TRF7970A_WAIT_FOR_FIFO_DRAIN_TIMEOUT 20
139 #define TRF7970A_WAIT_TO_ISSUE_ISO15693_EOF 40
141 /* Guard times for various RF technologies (in us) */
142 #define TRF7970A_GUARD_TIME_NFCA 5000
143 #define TRF7970A_GUARD_TIME_NFCB 5000
144 #define TRF7970A_GUARD_TIME_NFCF 20000
145 #define TRF7970A_GUARD_TIME_15693 1000
148 /* Erratum: When reading IRQ Status register on trf7970a, we must issue a
149 * read continuous command for IRQ Status and Collision Position registers.
151 #define TRF7970A_QUIRK_IRQ_STATUS_READ BIT(0)
152 #define TRF7970A_QUIRK_EN2_MUST_STAY_LOW BIT(1)
154 /* Direct commands */
155 #define TRF7970A_CMD_IDLE 0x00
156 #define TRF7970A_CMD_SOFT_INIT 0x03
157 #define TRF7970A_CMD_RF_COLLISION 0x04
158 #define TRF7970A_CMD_RF_COLLISION_RESPONSE_N 0x05
159 #define TRF7970A_CMD_RF_COLLISION_RESPONSE_0 0x06
160 #define TRF7970A_CMD_FIFO_RESET 0x0f
161 #define TRF7970A_CMD_TRANSMIT_NO_CRC 0x10
162 #define TRF7970A_CMD_TRANSMIT 0x11
163 #define TRF7970A_CMD_DELAY_TRANSMIT_NO_CRC 0x12
164 #define TRF7970A_CMD_DELAY_TRANSMIT 0x13
165 #define TRF7970A_CMD_EOF 0x14
166 #define TRF7970A_CMD_CLOSE_SLOT 0x15
167 #define TRF7970A_CMD_BLOCK_RX 0x16
168 #define TRF7970A_CMD_ENABLE_RX 0x17
169 #define TRF7970A_CMD_TEST_INT_RF 0x18
170 #define TRF7970A_CMD_TEST_EXT_RF 0x19
171 #define TRF7970A_CMD_RX_GAIN_ADJUST 0x1a
173 /* Bits determining whether its a direct command or register R/W,
174 * whether to use a continuous SPI transaction or not, and the actual
175 * direct cmd opcode or regster address.
177 #define TRF7970A_CMD_BIT_CTRL BIT(7)
178 #define TRF7970A_CMD_BIT_RW BIT(6)
179 #define TRF7970A_CMD_BIT_CONTINUOUS BIT(5)
180 #define TRF7970A_CMD_BIT_OPCODE(opcode) ((opcode) & 0x1f)
182 /* Registers addresses */
183 #define TRF7970A_CHIP_STATUS_CTRL 0x00
184 #define TRF7970A_ISO_CTRL 0x01
185 #define TRF7970A_ISO14443B_TX_OPTIONS 0x02
186 #define TRF7970A_ISO14443A_HIGH_BITRATE_OPTIONS 0x03
187 #define TRF7970A_TX_TIMER_SETTING_H_BYTE 0x04
188 #define TRF7970A_TX_TIMER_SETTING_L_BYTE 0x05
189 #define TRF7970A_TX_PULSE_LENGTH_CTRL 0x06
190 #define TRF7970A_RX_NO_RESPONSE_WAIT 0x07
191 #define TRF7970A_RX_WAIT_TIME 0x08
192 #define TRF7970A_MODULATOR_SYS_CLK_CTRL 0x09
193 #define TRF7970A_RX_SPECIAL_SETTINGS 0x0a
194 #define TRF7970A_REG_IO_CTRL 0x0b
195 #define TRF7970A_IRQ_STATUS 0x0c
196 #define TRF7970A_COLLISION_IRQ_MASK 0x0d
197 #define TRF7970A_COLLISION_POSITION 0x0e
198 #define TRF7970A_RSSI_OSC_STATUS 0x0f
199 #define TRF7970A_SPECIAL_FCN_REG1 0x10
200 #define TRF7970A_SPECIAL_FCN_REG2 0x11
201 #define TRF7970A_RAM1 0x12
202 #define TRF7970A_RAM2 0x13
203 #define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS 0x14
204 #define TRF7970A_NFC_LOW_FIELD_LEVEL 0x16
205 #define TRF7970A_NFCID1 0x17
206 #define TRF7970A_NFC_TARGET_LEVEL 0x18
207 #define TRF79070A_NFC_TARGET_PROTOCOL 0x19
208 #define TRF7970A_TEST_REGISTER1 0x1a
209 #define TRF7970A_TEST_REGISTER2 0x1b
210 #define TRF7970A_FIFO_STATUS 0x1c
211 #define TRF7970A_TX_LENGTH_BYTE1 0x1d
212 #define TRF7970A_TX_LENGTH_BYTE2 0x1e
213 #define TRF7970A_FIFO_IO_REGISTER 0x1f
215 /* Chip Status Control Register Bits */
216 #define TRF7970A_CHIP_STATUS_VRS5_3 BIT(0)
217 #define TRF7970A_CHIP_STATUS_REC_ON BIT(1)
218 #define TRF7970A_CHIP_STATUS_AGC_ON BIT(2)
219 #define TRF7970A_CHIP_STATUS_PM_ON BIT(3)
220 #define TRF7970A_CHIP_STATUS_RF_PWR BIT(4)
221 #define TRF7970A_CHIP_STATUS_RF_ON BIT(5)
222 #define TRF7970A_CHIP_STATUS_DIRECT BIT(6)
223 #define TRF7970A_CHIP_STATUS_STBY BIT(7)
225 /* ISO Control Register Bits */
226 #define TRF7970A_ISO_CTRL_15693_SGL_1OF4_662 0x00
227 #define TRF7970A_ISO_CTRL_15693_SGL_1OF256_662 0x01
228 #define TRF7970A_ISO_CTRL_15693_SGL_1OF4_2648 0x02
229 #define TRF7970A_ISO_CTRL_15693_SGL_1OF256_2648 0x03
230 #define TRF7970A_ISO_CTRL_15693_DBL_1OF4_667a 0x04
231 #define TRF7970A_ISO_CTRL_15693_DBL_1OF256_667 0x05
232 #define TRF7970A_ISO_CTRL_15693_DBL_1OF4_2669 0x06
233 #define TRF7970A_ISO_CTRL_15693_DBL_1OF256_2669 0x07
234 #define TRF7970A_ISO_CTRL_14443A_106 0x08
235 #define TRF7970A_ISO_CTRL_14443A_212 0x09
236 #define TRF7970A_ISO_CTRL_14443A_424 0x0a
237 #define TRF7970A_ISO_CTRL_14443A_848 0x0b
238 #define TRF7970A_ISO_CTRL_14443B_106 0x0c
239 #define TRF7970A_ISO_CTRL_14443B_212 0x0d
240 #define TRF7970A_ISO_CTRL_14443B_424 0x0e
241 #define TRF7970A_ISO_CTRL_14443B_848 0x0f
242 #define TRF7970A_ISO_CTRL_FELICA_212 0x1a
243 #define TRF7970A_ISO_CTRL_FELICA_424 0x1b
244 #define TRF7970A_ISO_CTRL_NFC_NFCA_106 0x01
245 #define TRF7970A_ISO_CTRL_NFC_NFCF_212 0x02
246 #define TRF7970A_ISO_CTRL_NFC_NFCF_424 0x03
247 #define TRF7970A_ISO_CTRL_NFC_CE_14443A 0x00
248 #define TRF7970A_ISO_CTRL_NFC_CE_14443B 0x01
249 #define TRF7970A_ISO_CTRL_NFC_CE BIT(2)
250 #define TRF7970A_ISO_CTRL_NFC_ACTIVE BIT(3)
251 #define TRF7970A_ISO_CTRL_NFC_INITIATOR BIT(4)
252 #define TRF7970A_ISO_CTRL_NFC_NFC_CE_MODE BIT(5)
253 #define TRF7970A_ISO_CTRL_RFID BIT(5)
254 #define TRF7970A_ISO_CTRL_DIR_MODE BIT(6)
255 #define TRF7970A_ISO_CTRL_RX_CRC_N BIT(7) /* true == No CRC */
257 #define TRF7970A_ISO_CTRL_RFID_SPEED_MASK 0x1f
259 /* Modulator and SYS_CLK Control Register Bits */
260 #define TRF7970A_MODULATOR_DEPTH(n) ((n) & 0x7)
261 #define TRF7970A_MODULATOR_DEPTH_ASK10 (TRF7970A_MODULATOR_DEPTH(0))
262 #define TRF7970A_MODULATOR_DEPTH_OOK (TRF7970A_MODULATOR_DEPTH(1))
263 #define TRF7970A_MODULATOR_DEPTH_ASK7 (TRF7970A_MODULATOR_DEPTH(2))
264 #define TRF7970A_MODULATOR_DEPTH_ASK8_5 (TRF7970A_MODULATOR_DEPTH(3))
265 #define TRF7970A_MODULATOR_DEPTH_ASK13 (TRF7970A_MODULATOR_DEPTH(4))
266 #define TRF7970A_MODULATOR_DEPTH_ASK16 (TRF7970A_MODULATOR_DEPTH(5))
267 #define TRF7970A_MODULATOR_DEPTH_ASK22 (TRF7970A_MODULATOR_DEPTH(6))
268 #define TRF7970A_MODULATOR_DEPTH_ASK30 (TRF7970A_MODULATOR_DEPTH(7))
269 #define TRF7970A_MODULATOR_EN_ANA BIT(3)
270 #define TRF7970A_MODULATOR_CLK(n) (((n) & 0x3) << 4)
271 #define TRF7970A_MODULATOR_CLK_DISABLED (TRF7970A_MODULATOR_CLK(0))
272 #define TRF7970A_MODULATOR_CLK_3_6 (TRF7970A_MODULATOR_CLK(1))
273 #define TRF7970A_MODULATOR_CLK_6_13 (TRF7970A_MODULATOR_CLK(2))
274 #define TRF7970A_MODULATOR_CLK_13_27 (TRF7970A_MODULATOR_CLK(3))
275 #define TRF7970A_MODULATOR_EN_OOK BIT(6)
276 #define TRF7970A_MODULATOR_27MHZ BIT(7)
278 #define TRF7970A_RX_SPECIAL_SETTINGS_NO_LIM BIT(0)
279 #define TRF7970A_RX_SPECIAL_SETTINGS_AGCR BIT(1)
280 #define TRF7970A_RX_SPECIAL_SETTINGS_GD_0DB (0x0 << 2)
281 #define TRF7970A_RX_SPECIAL_SETTINGS_GD_5DB (0x1 << 2)
282 #define TRF7970A_RX_SPECIAL_SETTINGS_GD_10DB (0x2 << 2)
283 #define TRF7970A_RX_SPECIAL_SETTINGS_GD_15DB (0x3 << 2)
284 #define TRF7970A_RX_SPECIAL_SETTINGS_HBT BIT(4)
285 #define TRF7970A_RX_SPECIAL_SETTINGS_M848 BIT(5)
286 #define TRF7970A_RX_SPECIAL_SETTINGS_C424 BIT(6)
287 #define TRF7970A_RX_SPECIAL_SETTINGS_C212 BIT(7)
289 #define TRF7970A_REG_IO_CTRL_VRS(v) ((v) & 0x07)
290 #define TRF7970A_REG_IO_CTRL_IO_LOW BIT(5)
291 #define TRF7970A_REG_IO_CTRL_EN_EXT_PA BIT(6)
292 #define TRF7970A_REG_IO_CTRL_AUTO_REG BIT(7)
294 /* IRQ Status Register Bits */
295 #define TRF7970A_IRQ_STATUS_NORESP BIT(0) /* ISO15693 only */
296 #define TRF7970A_IRQ_STATUS_NFC_COL_ERROR BIT(0)
297 #define TRF7970A_IRQ_STATUS_COL BIT(1)
298 #define TRF7970A_IRQ_STATUS_FRAMING_EOF_ERROR BIT(2)
299 #define TRF7970A_IRQ_STATUS_NFC_RF BIT(2)
300 #define TRF7970A_IRQ_STATUS_PARITY_ERROR BIT(3)
301 #define TRF7970A_IRQ_STATUS_NFC_SDD BIT(3)
302 #define TRF7970A_IRQ_STATUS_CRC_ERROR BIT(4)
303 #define TRF7970A_IRQ_STATUS_NFC_PROTO_ERROR BIT(4)
304 #define TRF7970A_IRQ_STATUS_FIFO BIT(5)
305 #define TRF7970A_IRQ_STATUS_SRX BIT(6)
306 #define TRF7970A_IRQ_STATUS_TX BIT(7)
308 #define TRF7970A_IRQ_STATUS_ERROR \
309 (TRF7970A_IRQ_STATUS_COL | \
310 TRF7970A_IRQ_STATUS_FRAMING_EOF_ERROR | \
311 TRF7970A_IRQ_STATUS_PARITY_ERROR | \
312 TRF7970A_IRQ_STATUS_CRC_ERROR)
314 #define TRF7970A_RSSI_OSC_STATUS_RSSI_MASK (BIT(2) | BIT(1) | BIT(0))
315 #define TRF7970A_RSSI_OSC_STATUS_RSSI_X_MASK (BIT(5) | BIT(4) | BIT(3))
316 #define TRF7970A_RSSI_OSC_STATUS_RSSI_OSC_OK BIT(6)
318 #define TRF7970A_SPECIAL_FCN_REG1_COL_7_6 BIT(0)
319 #define TRF7970A_SPECIAL_FCN_REG1_14_ANTICOLL BIT(1)
320 #define TRF7970A_SPECIAL_FCN_REG1_4_BIT_RX BIT(2)
321 #define TRF7970A_SPECIAL_FCN_REG1_SP_DIR_MODE BIT(3)
322 #define TRF7970A_SPECIAL_FCN_REG1_NEXT_SLOT_37US BIT(4)
323 #define TRF7970A_SPECIAL_FCN_REG1_PAR43 BIT(5)
325 #define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLH_124 (0x0 << 2)
326 #define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLH_120 (0x1 << 2)
327 #define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLH_112 (0x2 << 2)
328 #define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLH_96 (0x3 << 2)
329 #define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLL_4 0x0
330 #define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLL_8 0x1
331 #define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLL_16 0x2
332 #define TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLL_32 0x3
334 #define TRF7970A_NFC_LOW_FIELD_LEVEL_RFDET(v) ((v) & 0x07)
335 #define TRF7970A_NFC_LOW_FIELD_LEVEL_CLEX_DIS BIT(7)
337 #define TRF7970A_NFC_TARGET_LEVEL_RFDET(v) ((v) & 0x07)
338 #define TRF7970A_NFC_TARGET_LEVEL_HI_RF BIT(3)
339 #define TRF7970A_NFC_TARGET_LEVEL_SDD_EN BIT(5)
340 #define TRF7970A_NFC_TARGET_LEVEL_LD_S_4BYTES (0x0 << 6)
341 #define TRF7970A_NFC_TARGET_LEVEL_LD_S_7BYTES (0x1 << 6)
342 #define TRF7970A_NFC_TARGET_LEVEL_LD_S_10BYTES (0x2 << 6)
344 #define TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_106 BIT(0)
345 #define TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_212 BIT(1)
346 #define TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_424 (BIT(0) | BIT(1))
347 #define TRF79070A_NFC_TARGET_PROTOCOL_PAS_14443B BIT(2)
348 #define TRF79070A_NFC_TARGET_PROTOCOL_PAS_106 BIT(3)
349 #define TRF79070A_NFC_TARGET_PROTOCOL_FELICA BIT(4)
350 #define TRF79070A_NFC_TARGET_PROTOCOL_RF_L BIT(6)
351 #define TRF79070A_NFC_TARGET_PROTOCOL_RF_H BIT(7)
353 #define TRF79070A_NFC_TARGET_PROTOCOL_106A \
354 (TRF79070A_NFC_TARGET_PROTOCOL_RF_H | \
355 TRF79070A_NFC_TARGET_PROTOCOL_RF_L | \
356 TRF79070A_NFC_TARGET_PROTOCOL_PAS_106 | \
357 TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_106)
359 #define TRF79070A_NFC_TARGET_PROTOCOL_106B \
360 (TRF79070A_NFC_TARGET_PROTOCOL_RF_H | \
361 TRF79070A_NFC_TARGET_PROTOCOL_RF_L | \
362 TRF79070A_NFC_TARGET_PROTOCOL_PAS_14443B | \
363 TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_106)
365 #define TRF79070A_NFC_TARGET_PROTOCOL_212F \
366 (TRF79070A_NFC_TARGET_PROTOCOL_RF_H | \
367 TRF79070A_NFC_TARGET_PROTOCOL_RF_L | \
368 TRF79070A_NFC_TARGET_PROTOCOL_FELICA | \
369 TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_212)
371 #define TRF79070A_NFC_TARGET_PROTOCOL_424F \
372 (TRF79070A_NFC_TARGET_PROTOCOL_RF_H | \
373 TRF79070A_NFC_TARGET_PROTOCOL_RF_L | \
374 TRF79070A_NFC_TARGET_PROTOCOL_FELICA | \
375 TRF79070A_NFC_TARGET_PROTOCOL_NFCBR_424)
377 #define TRF7970A_FIFO_STATUS_OVERFLOW BIT(7)
379 /* NFC (ISO/IEC 14443A) Type 2 Tag commands */
380 #define NFC_T2T_CMD_READ 0x30
382 /* ISO 15693 commands codes */
383 #define ISO15693_CMD_INVENTORY 0x01
384 #define ISO15693_CMD_READ_SINGLE_BLOCK 0x20
385 #define ISO15693_CMD_WRITE_SINGLE_BLOCK 0x21
386 #define ISO15693_CMD_LOCK_BLOCK 0x22
387 #define ISO15693_CMD_READ_MULTIPLE_BLOCK 0x23
388 #define ISO15693_CMD_WRITE_MULTIPLE_BLOCK 0x24
389 #define ISO15693_CMD_SELECT 0x25
390 #define ISO15693_CMD_RESET_TO_READY 0x26
391 #define ISO15693_CMD_WRITE_AFI 0x27
392 #define ISO15693_CMD_LOCK_AFI 0x28
393 #define ISO15693_CMD_WRITE_DSFID 0x29
394 #define ISO15693_CMD_LOCK_DSFID 0x2a
395 #define ISO15693_CMD_GET_SYSTEM_INFO 0x2b
396 #define ISO15693_CMD_GET_MULTIPLE_BLOCK_SECURITY_STATUS 0x2c
398 /* ISO 15693 request and response flags */
399 #define ISO15693_REQ_FLAG_SUB_CARRIER BIT(0)
400 #define ISO15693_REQ_FLAG_DATA_RATE BIT(1)
401 #define ISO15693_REQ_FLAG_INVENTORY BIT(2)
402 #define ISO15693_REQ_FLAG_PROTOCOL_EXT BIT(3)
403 #define ISO15693_REQ_FLAG_SELECT BIT(4)
404 #define ISO15693_REQ_FLAG_AFI BIT(4)
405 #define ISO15693_REQ_FLAG_ADDRESS BIT(5)
406 #define ISO15693_REQ_FLAG_NB_SLOTS BIT(5)
407 #define ISO15693_REQ_FLAG_OPTION BIT(6)
409 #define ISO15693_REQ_FLAG_SPEED_MASK \
410 (ISO15693_REQ_FLAG_SUB_CARRIER | ISO15693_REQ_FLAG_DATA_RATE)
412 enum trf7970a_state
{
416 TRF7970A_ST_IDLE_RX_BLOCKED
,
417 TRF7970A_ST_WAIT_FOR_TX_FIFO
,
418 TRF7970A_ST_WAIT_FOR_RX_DATA
,
419 TRF7970A_ST_WAIT_FOR_RX_DATA_CONT
,
420 TRF7970A_ST_WAIT_TO_ISSUE_EOF
,
421 TRF7970A_ST_LISTENING
,
422 TRF7970A_ST_LISTENING_MD
,
427 enum trf7970a_state state
;
429 struct spi_device
*spi
;
430 struct regulator
*regulator
;
431 struct nfc_digital_dev
*ddev
;
435 struct sk_buff
*tx_skb
;
436 struct sk_buff
*rx_skb
;
437 nfc_digital_cmd_complete_t cb
;
442 u8 modulator_sys_clk_ctrl
;
445 unsigned int guard_time
;
451 struct gpio_desc
*en_gpiod
;
452 struct gpio_desc
*en2_gpiod
;
454 unsigned int timeout
;
456 struct delayed_work timeout_work
;
459 static int trf7970a_cmd(struct trf7970a
*trf
, u8 opcode
)
461 u8 cmd
= TRF7970A_CMD_BIT_CTRL
| TRF7970A_CMD_BIT_OPCODE(opcode
);
464 dev_dbg(trf
->dev
, "cmd: 0x%x\n", cmd
);
466 ret
= spi_write(trf
->spi
, &cmd
, 1);
468 dev_err(trf
->dev
, "%s - cmd: 0x%x, ret: %d\n", __func__
, cmd
,
473 static int trf7970a_read(struct trf7970a
*trf
, u8 reg
, u8
*val
)
475 u8 addr
= TRF7970A_CMD_BIT_RW
| reg
;
478 ret
= spi_write_then_read(trf
->spi
, &addr
, 1, val
, 1);
480 dev_err(trf
->dev
, "%s - addr: 0x%x, ret: %d\n", __func__
, addr
,
483 dev_dbg(trf
->dev
, "read(0x%x): 0x%x\n", addr
, *val
);
488 static int trf7970a_read_cont(struct trf7970a
*trf
, u8 reg
, u8
*buf
,
491 u8 addr
= reg
| TRF7970A_CMD_BIT_RW
| TRF7970A_CMD_BIT_CONTINUOUS
;
492 struct spi_transfer t
[2];
493 struct spi_message m
;
496 dev_dbg(trf
->dev
, "read_cont(0x%x, %zd)\n", addr
, len
);
498 spi_message_init(&m
);
500 memset(&t
, 0, sizeof(t
));
503 t
[0].len
= sizeof(addr
);
504 spi_message_add_tail(&t
[0], &m
);
508 spi_message_add_tail(&t
[1], &m
);
510 ret
= spi_sync(trf
->spi
, &m
);
512 dev_err(trf
->dev
, "%s - addr: 0x%x, ret: %d\n", __func__
, addr
,
517 static int trf7970a_write(struct trf7970a
*trf
, u8 reg
, u8 val
)
519 u8 buf
[2] = { reg
, val
};
522 dev_dbg(trf
->dev
, "write(0x%x): 0x%x\n", reg
, val
);
524 ret
= spi_write(trf
->spi
, buf
, 2);
526 dev_err(trf
->dev
, "%s - write: 0x%x 0x%x, ret: %d\n", __func__
,
527 buf
[0], buf
[1], ret
);
532 static int trf7970a_read_irqstatus(struct trf7970a
*trf
, u8
*status
)
538 addr
= TRF7970A_IRQ_STATUS
| TRF7970A_CMD_BIT_RW
;
540 if (trf
->quirks
& TRF7970A_QUIRK_IRQ_STATUS_READ
) {
541 addr
|= TRF7970A_CMD_BIT_CONTINUOUS
;
542 ret
= spi_write_then_read(trf
->spi
, &addr
, 1, buf
, 2);
544 ret
= spi_write_then_read(trf
->spi
, &addr
, 1, buf
, 1);
548 dev_err(trf
->dev
, "%s - irqstatus: Status read failed: %d\n",
556 static int trf7970a_read_target_proto(struct trf7970a
*trf
, u8
*target_proto
)
562 addr
= TRF79070A_NFC_TARGET_PROTOCOL
| TRF7970A_CMD_BIT_RW
|
563 TRF7970A_CMD_BIT_CONTINUOUS
;
565 ret
= spi_write_then_read(trf
->spi
, &addr
, 1, buf
, 2);
567 dev_err(trf
->dev
, "%s - target_proto: Read failed: %d\n",
570 *target_proto
= buf
[0];
575 static int trf7970a_mode_detect(struct trf7970a
*trf
, u8
*rf_tech
)
578 u8 target_proto
, tech
;
580 ret
= trf7970a_read_target_proto(trf
, &target_proto
);
584 switch (target_proto
) {
585 case TRF79070A_NFC_TARGET_PROTOCOL_106A
:
586 tech
= NFC_DIGITAL_RF_TECH_106A
;
588 case TRF79070A_NFC_TARGET_PROTOCOL_106B
:
589 tech
= NFC_DIGITAL_RF_TECH_106B
;
591 case TRF79070A_NFC_TARGET_PROTOCOL_212F
:
592 tech
= NFC_DIGITAL_RF_TECH_212F
;
594 case TRF79070A_NFC_TARGET_PROTOCOL_424F
:
595 tech
= NFC_DIGITAL_RF_TECH_424F
;
598 dev_dbg(trf
->dev
, "%s - mode_detect: target_proto: 0x%x\n",
599 __func__
, target_proto
);
608 static void trf7970a_send_upstream(struct trf7970a
*trf
)
610 dev_kfree_skb_any(trf
->tx_skb
);
613 if (trf
->rx_skb
&& !IS_ERR(trf
->rx_skb
) && !trf
->aborting
)
614 print_hex_dump_debug("trf7970a rx data: ", DUMP_PREFIX_NONE
,
615 16, 1, trf
->rx_skb
->data
, trf
->rx_skb
->len
,
618 trf
->state
= TRF7970A_ST_IDLE
;
621 dev_dbg(trf
->dev
, "Abort process complete\n");
623 if (!IS_ERR(trf
->rx_skb
)) {
624 kfree_skb(trf
->rx_skb
);
625 trf
->rx_skb
= ERR_PTR(-ECANCELED
);
628 trf
->aborting
= false;
631 trf
->cb(trf
->ddev
, trf
->cb_arg
, trf
->rx_skb
);
636 static void trf7970a_send_err_upstream(struct trf7970a
*trf
, int errno
)
638 dev_dbg(trf
->dev
, "Error - state: %d, errno: %d\n", trf
->state
, errno
);
640 cancel_delayed_work(&trf
->timeout_work
);
642 kfree_skb(trf
->rx_skb
);
643 trf
->rx_skb
= ERR_PTR(errno
);
645 trf7970a_send_upstream(trf
);
648 static int trf7970a_transmit(struct trf7970a
*trf
, struct sk_buff
*skb
,
649 unsigned int len
, u8
*prefix
,
650 unsigned int prefix_len
)
652 struct spi_transfer t
[2];
653 struct spi_message m
;
654 unsigned int timeout
;
657 print_hex_dump_debug("trf7970a tx data: ", DUMP_PREFIX_NONE
,
658 16, 1, skb
->data
, len
, false);
660 spi_message_init(&m
);
662 memset(&t
, 0, sizeof(t
));
664 t
[0].tx_buf
= prefix
;
665 t
[0].len
= prefix_len
;
666 spi_message_add_tail(&t
[0], &m
);
668 t
[1].tx_buf
= skb
->data
;
670 spi_message_add_tail(&t
[1], &m
);
672 ret
= spi_sync(trf
->spi
, &m
);
674 dev_err(trf
->dev
, "%s - Can't send tx data: %d\n", __func__
,
682 trf
->state
= TRF7970A_ST_WAIT_FOR_TX_FIFO
;
683 timeout
= TRF7970A_WAIT_FOR_FIFO_DRAIN_TIMEOUT
;
685 if (trf
->issue_eof
) {
686 trf
->state
= TRF7970A_ST_WAIT_TO_ISSUE_EOF
;
687 timeout
= TRF7970A_WAIT_TO_ISSUE_ISO15693_EOF
;
689 trf
->state
= TRF7970A_ST_WAIT_FOR_RX_DATA
;
692 timeout
= TRF7970A_WAIT_FOR_TX_IRQ
;
694 timeout
= trf
->timeout
;
698 dev_dbg(trf
->dev
, "Setting timeout for %d ms, state: %d\n", timeout
,
701 schedule_delayed_work(&trf
->timeout_work
, msecs_to_jiffies(timeout
));
706 static void trf7970a_fill_fifo(struct trf7970a
*trf
)
708 struct sk_buff
*skb
= trf
->tx_skb
;
714 ret
= trf7970a_read(trf
, TRF7970A_FIFO_STATUS
, &fifo_bytes
);
716 trf7970a_send_err_upstream(trf
, ret
);
720 dev_dbg(trf
->dev
, "Filling FIFO - fifo_bytes: 0x%x\n", fifo_bytes
);
722 fifo_bytes
&= ~TRF7970A_FIFO_STATUS_OVERFLOW
;
724 /* Calculate how much more data can be written to the fifo */
725 len
= TRF7970A_FIFO_SIZE
- fifo_bytes
;
727 schedule_delayed_work(&trf
->timeout_work
,
728 msecs_to_jiffies(TRF7970A_WAIT_FOR_FIFO_DRAIN_TIMEOUT
));
732 len
= min(skb
->len
, len
);
734 prefix
= TRF7970A_CMD_BIT_CONTINUOUS
| TRF7970A_FIFO_IO_REGISTER
;
736 ret
= trf7970a_transmit(trf
, skb
, len
, &prefix
, sizeof(prefix
));
738 trf7970a_send_err_upstream(trf
, ret
);
741 static void trf7970a_drain_fifo(struct trf7970a
*trf
, u8 status
)
743 struct sk_buff
*skb
= trf
->rx_skb
;
747 if (status
& TRF7970A_IRQ_STATUS_ERROR
) {
748 trf7970a_send_err_upstream(trf
, -EIO
);
752 ret
= trf7970a_read(trf
, TRF7970A_FIFO_STATUS
, &fifo_bytes
);
754 trf7970a_send_err_upstream(trf
, ret
);
758 dev_dbg(trf
->dev
, "Draining FIFO - fifo_bytes: 0x%x\n", fifo_bytes
);
760 fifo_bytes
&= ~TRF7970A_FIFO_STATUS_OVERFLOW
;
765 if (fifo_bytes
> skb_tailroom(skb
)) {
766 skb
= skb_copy_expand(skb
, skb_headroom(skb
),
767 max_t(int, fifo_bytes
,
768 TRF7970A_RX_SKB_ALLOC_SIZE
),
771 trf7970a_send_err_upstream(trf
, -ENOMEM
);
775 kfree_skb(trf
->rx_skb
);
779 ret
= trf7970a_read_cont(trf
, TRF7970A_FIFO_IO_REGISTER
,
780 skb_put(skb
, fifo_bytes
), fifo_bytes
);
782 trf7970a_send_err_upstream(trf
, ret
);
786 /* If received Type 2 ACK/NACK, shift right 4 bits and pass up */
787 if ((trf
->framing
== NFC_DIGITAL_FRAMING_NFCA_T2T
) && (skb
->len
== 1) &&
788 (trf
->special_fcn_reg1
== TRF7970A_SPECIAL_FCN_REG1_4_BIT_RX
)) {
790 status
= TRF7970A_IRQ_STATUS_SRX
;
792 trf
->state
= TRF7970A_ST_WAIT_FOR_RX_DATA_CONT
;
794 ret
= trf7970a_read(trf
, TRF7970A_FIFO_STATUS
, &fifo_bytes
);
796 trf7970a_send_err_upstream(trf
, ret
);
800 fifo_bytes
&= ~TRF7970A_FIFO_STATUS_OVERFLOW
;
802 /* If there are bytes in the FIFO, set status to '0' so
803 * the if stmt below doesn't fire and the driver will wait
804 * for the trf7970a to generate another RX interrupt.
811 if (status
== TRF7970A_IRQ_STATUS_SRX
) { /* Receive complete */
812 trf7970a_send_upstream(trf
);
816 dev_dbg(trf
->dev
, "Setting timeout for %d ms\n",
817 TRF7970A_WAIT_FOR_RX_DATA_TIMEOUT
);
819 schedule_delayed_work(&trf
->timeout_work
,
820 msecs_to_jiffies(TRF7970A_WAIT_FOR_RX_DATA_TIMEOUT
));
823 static irqreturn_t
trf7970a_irq(int irq
, void *dev_id
)
825 struct trf7970a
*trf
= dev_id
;
827 u8 status
, fifo_bytes
, iso_ctrl
;
829 mutex_lock(&trf
->lock
);
831 if (trf
->state
== TRF7970A_ST_RF_OFF
) {
832 mutex_unlock(&trf
->lock
);
836 ret
= trf7970a_read_irqstatus(trf
, &status
);
838 mutex_unlock(&trf
->lock
);
842 dev_dbg(trf
->dev
, "IRQ - state: %d, status: 0x%x\n", trf
->state
,
846 mutex_unlock(&trf
->lock
);
850 switch (trf
->state
) {
851 case TRF7970A_ST_IDLE
:
852 case TRF7970A_ST_IDLE_RX_BLOCKED
:
853 /* If initiator and getting interrupts caused by RF noise,
854 * turn off the receiver to avoid unnecessary interrupts.
855 * It will be turned back on in trf7970a_send_cmd() when
856 * the next command is issued.
858 if (trf
->is_initiator
&& (status
& TRF7970A_IRQ_STATUS_ERROR
)) {
859 trf7970a_cmd(trf
, TRF7970A_CMD_BLOCK_RX
);
860 trf
->state
= TRF7970A_ST_IDLE_RX_BLOCKED
;
863 trf7970a_cmd(trf
, TRF7970A_CMD_FIFO_RESET
);
865 case TRF7970A_ST_WAIT_FOR_TX_FIFO
:
866 if (status
& TRF7970A_IRQ_STATUS_TX
) {
867 trf
->ignore_timeout
=
868 !cancel_delayed_work(&trf
->timeout_work
);
869 trf7970a_fill_fifo(trf
);
871 trf7970a_send_err_upstream(trf
, -EIO
);
874 case TRF7970A_ST_WAIT_FOR_RX_DATA
:
875 case TRF7970A_ST_WAIT_FOR_RX_DATA_CONT
:
876 if (status
& TRF7970A_IRQ_STATUS_SRX
) {
877 trf
->ignore_timeout
=
878 !cancel_delayed_work(&trf
->timeout_work
);
879 trf7970a_drain_fifo(trf
, status
);
880 } else if (status
& TRF7970A_IRQ_STATUS_FIFO
) {
881 ret
= trf7970a_read(trf
, TRF7970A_FIFO_STATUS
,
884 fifo_bytes
&= ~TRF7970A_FIFO_STATUS_OVERFLOW
;
887 trf7970a_send_err_upstream(trf
, ret
);
888 else if (!fifo_bytes
)
889 trf7970a_cmd(trf
, TRF7970A_CMD_FIFO_RESET
);
890 } else if ((status
== TRF7970A_IRQ_STATUS_TX
) ||
891 (!trf
->is_initiator
&&
892 (status
== (TRF7970A_IRQ_STATUS_TX
|
893 TRF7970A_IRQ_STATUS_NFC_RF
)))) {
894 trf7970a_cmd(trf
, TRF7970A_CMD_FIFO_RESET
);
897 trf
->ignore_timeout
=
898 !cancel_delayed_work(&trf
->timeout_work
);
899 trf
->rx_skb
= ERR_PTR(0);
900 trf7970a_send_upstream(trf
);
904 if (trf
->is_initiator
)
907 iso_ctrl
= trf
->iso_ctrl
;
909 switch (trf
->framing
) {
910 case NFC_DIGITAL_FRAMING_NFCA_STANDARD
:
911 trf
->tx_cmd
= TRF7970A_CMD_TRANSMIT_NO_CRC
;
912 iso_ctrl
|= TRF7970A_ISO_CTRL_RX_CRC_N
;
913 trf
->iso_ctrl
= 0xff; /* Force ISO_CTRL write */
915 case NFC_DIGITAL_FRAMING_NFCA_STANDARD_WITH_CRC_A
:
916 trf
->tx_cmd
= TRF7970A_CMD_TRANSMIT
;
917 iso_ctrl
&= ~TRF7970A_ISO_CTRL_RX_CRC_N
;
918 trf
->iso_ctrl
= 0xff; /* Force ISO_CTRL write */
920 case NFC_DIGITAL_FRAMING_NFCA_ANTICOL_COMPLETE
:
921 ret
= trf7970a_write(trf
,
922 TRF7970A_SPECIAL_FCN_REG1
,
923 TRF7970A_SPECIAL_FCN_REG1_14_ANTICOLL
);
925 goto err_unlock_exit
;
927 trf
->special_fcn_reg1
=
928 TRF7970A_SPECIAL_FCN_REG1_14_ANTICOLL
;
934 if (iso_ctrl
!= trf
->iso_ctrl
) {
935 ret
= trf7970a_write(trf
, TRF7970A_ISO_CTRL
,
938 goto err_unlock_exit
;
940 trf
->iso_ctrl
= iso_ctrl
;
943 trf7970a_send_err_upstream(trf
, -EIO
);
946 case TRF7970A_ST_WAIT_TO_ISSUE_EOF
:
947 if (status
!= TRF7970A_IRQ_STATUS_TX
)
948 trf7970a_send_err_upstream(trf
, -EIO
);
950 case TRF7970A_ST_LISTENING
:
951 if (status
& TRF7970A_IRQ_STATUS_SRX
) {
952 trf
->ignore_timeout
=
953 !cancel_delayed_work(&trf
->timeout_work
);
954 trf7970a_drain_fifo(trf
, status
);
955 } else if (!(status
& TRF7970A_IRQ_STATUS_NFC_RF
)) {
956 trf7970a_send_err_upstream(trf
, -EIO
);
959 case TRF7970A_ST_LISTENING_MD
:
960 if (status
& TRF7970A_IRQ_STATUS_SRX
) {
961 trf
->ignore_timeout
=
962 !cancel_delayed_work(&trf
->timeout_work
);
964 ret
= trf7970a_mode_detect(trf
, &trf
->md_rf_tech
);
966 trf7970a_send_err_upstream(trf
, ret
);
968 trf
->state
= TRF7970A_ST_LISTENING
;
969 trf7970a_drain_fifo(trf
, status
);
971 } else if (!(status
& TRF7970A_IRQ_STATUS_NFC_RF
)) {
972 trf7970a_send_err_upstream(trf
, -EIO
);
976 dev_err(trf
->dev
, "%s - Driver in invalid state: %d\n",
977 __func__
, trf
->state
);
981 mutex_unlock(&trf
->lock
);
985 static void trf7970a_issue_eof(struct trf7970a
*trf
)
989 dev_dbg(trf
->dev
, "Issuing EOF\n");
991 ret
= trf7970a_cmd(trf
, TRF7970A_CMD_FIFO_RESET
);
993 trf7970a_send_err_upstream(trf
, ret
);
995 ret
= trf7970a_cmd(trf
, TRF7970A_CMD_EOF
);
997 trf7970a_send_err_upstream(trf
, ret
);
999 trf
->state
= TRF7970A_ST_WAIT_FOR_RX_DATA
;
1001 dev_dbg(trf
->dev
, "Setting timeout for %d ms, state: %d\n",
1002 trf
->timeout
, trf
->state
);
1004 schedule_delayed_work(&trf
->timeout_work
,
1005 msecs_to_jiffies(trf
->timeout
));
1008 static void trf7970a_timeout_work_handler(struct work_struct
*work
)
1010 struct trf7970a
*trf
= container_of(work
, struct trf7970a
,
1013 dev_dbg(trf
->dev
, "Timeout - state: %d, ignore_timeout: %d\n",
1014 trf
->state
, trf
->ignore_timeout
);
1016 mutex_lock(&trf
->lock
);
1018 if (trf
->ignore_timeout
)
1019 trf
->ignore_timeout
= false;
1020 else if (trf
->state
== TRF7970A_ST_WAIT_FOR_RX_DATA_CONT
)
1021 trf7970a_drain_fifo(trf
, TRF7970A_IRQ_STATUS_SRX
);
1022 else if (trf
->state
== TRF7970A_ST_WAIT_TO_ISSUE_EOF
)
1023 trf7970a_issue_eof(trf
);
1025 trf7970a_send_err_upstream(trf
, -ETIMEDOUT
);
1027 mutex_unlock(&trf
->lock
);
1030 static int trf7970a_init(struct trf7970a
*trf
)
1034 dev_dbg(trf
->dev
, "Initializing device - state: %d\n", trf
->state
);
1036 ret
= trf7970a_cmd(trf
, TRF7970A_CMD_SOFT_INIT
);
1040 ret
= trf7970a_cmd(trf
, TRF7970A_CMD_IDLE
);
1044 ret
= trf7970a_write(trf
, TRF7970A_REG_IO_CTRL
,
1045 trf
->io_ctrl
| TRF7970A_REG_IO_CTRL_VRS(0x1));
1049 ret
= trf7970a_write(trf
, TRF7970A_NFC_TARGET_LEVEL
, 0);
1053 usleep_range(1000, 2000);
1055 trf
->chip_status_ctrl
&= ~TRF7970A_CHIP_STATUS_RF_ON
;
1057 ret
= trf7970a_write(trf
, TRF7970A_MODULATOR_SYS_CLK_CTRL
,
1058 trf
->modulator_sys_clk_ctrl
);
1062 ret
= trf7970a_write(trf
, TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS
,
1063 TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLH_96
|
1064 TRF7970A_ADJUTABLE_FIFO_IRQ_LEVELS_WLL_32
);
1068 ret
= trf7970a_write(trf
, TRF7970A_SPECIAL_FCN_REG1
, 0);
1072 trf
->special_fcn_reg1
= 0;
1074 trf
->iso_ctrl
= 0xff;
1078 dev_dbg(trf
->dev
, "Couldn't init device: %d\n", ret
);
1082 static void trf7970a_switch_rf_off(struct trf7970a
*trf
)
1084 if ((trf
->state
== TRF7970A_ST_PWR_OFF
) ||
1085 (trf
->state
== TRF7970A_ST_RF_OFF
))
1088 dev_dbg(trf
->dev
, "Switching rf off\n");
1090 trf
->chip_status_ctrl
&= ~TRF7970A_CHIP_STATUS_RF_ON
;
1092 trf7970a_write(trf
, TRF7970A_CHIP_STATUS_CTRL
, trf
->chip_status_ctrl
);
1094 trf
->aborting
= false;
1095 trf
->state
= TRF7970A_ST_RF_OFF
;
1097 pm_runtime_mark_last_busy(trf
->dev
);
1098 pm_runtime_put_autosuspend(trf
->dev
);
1101 static int trf7970a_switch_rf_on(struct trf7970a
*trf
)
1105 dev_dbg(trf
->dev
, "Switching rf on\n");
1107 pm_runtime_get_sync(trf
->dev
);
1109 if (trf
->state
!= TRF7970A_ST_RF_OFF
) { /* Power on, RF off */
1110 dev_err(trf
->dev
, "%s - Incorrect state: %d\n", __func__
,
1115 ret
= trf7970a_init(trf
);
1117 dev_err(trf
->dev
, "%s - Can't initialize: %d\n", __func__
, ret
);
1121 trf
->state
= TRF7970A_ST_IDLE
;
1126 static int trf7970a_switch_rf(struct nfc_digital_dev
*ddev
, bool on
)
1128 struct trf7970a
*trf
= nfc_digital_get_drvdata(ddev
);
1131 dev_dbg(trf
->dev
, "Switching RF - state: %d, on: %d\n", trf
->state
, on
);
1133 mutex_lock(&trf
->lock
);
1136 switch (trf
->state
) {
1137 case TRF7970A_ST_PWR_OFF
:
1138 case TRF7970A_ST_RF_OFF
:
1139 ret
= trf7970a_switch_rf_on(trf
);
1141 case TRF7970A_ST_IDLE
:
1142 case TRF7970A_ST_IDLE_RX_BLOCKED
:
1145 dev_err(trf
->dev
, "%s - Invalid request: %d %d\n",
1146 __func__
, trf
->state
, on
);
1147 trf7970a_switch_rf_off(trf
);
1151 switch (trf
->state
) {
1152 case TRF7970A_ST_PWR_OFF
:
1153 case TRF7970A_ST_RF_OFF
:
1156 dev_err(trf
->dev
, "%s - Invalid request: %d %d\n",
1157 __func__
, trf
->state
, on
);
1160 case TRF7970A_ST_IDLE
:
1161 case TRF7970A_ST_IDLE_RX_BLOCKED
:
1162 case TRF7970A_ST_WAIT_FOR_RX_DATA
:
1163 case TRF7970A_ST_WAIT_FOR_RX_DATA_CONT
:
1164 trf7970a_switch_rf_off(trf
);
1168 mutex_unlock(&trf
->lock
);
1172 static int trf7970a_in_config_rf_tech(struct trf7970a
*trf
, int tech
)
1176 dev_dbg(trf
->dev
, "rf technology: %d\n", tech
);
1179 case NFC_DIGITAL_RF_TECH_106A
:
1180 trf
->iso_ctrl_tech
= TRF7970A_ISO_CTRL_14443A_106
;
1181 trf
->modulator_sys_clk_ctrl
=
1182 (trf
->modulator_sys_clk_ctrl
& 0xf8) |
1183 TRF7970A_MODULATOR_DEPTH_OOK
;
1184 trf
->guard_time
= TRF7970A_GUARD_TIME_NFCA
;
1186 case NFC_DIGITAL_RF_TECH_106B
:
1187 trf
->iso_ctrl_tech
= TRF7970A_ISO_CTRL_14443B_106
;
1188 trf
->modulator_sys_clk_ctrl
=
1189 (trf
->modulator_sys_clk_ctrl
& 0xf8) |
1190 TRF7970A_MODULATOR_DEPTH_ASK10
;
1191 trf
->guard_time
= TRF7970A_GUARD_TIME_NFCB
;
1193 case NFC_DIGITAL_RF_TECH_212F
:
1194 trf
->iso_ctrl_tech
= TRF7970A_ISO_CTRL_FELICA_212
;
1195 trf
->modulator_sys_clk_ctrl
=
1196 (trf
->modulator_sys_clk_ctrl
& 0xf8) |
1197 TRF7970A_MODULATOR_DEPTH_ASK10
;
1198 trf
->guard_time
= TRF7970A_GUARD_TIME_NFCF
;
1200 case NFC_DIGITAL_RF_TECH_424F
:
1201 trf
->iso_ctrl_tech
= TRF7970A_ISO_CTRL_FELICA_424
;
1202 trf
->modulator_sys_clk_ctrl
=
1203 (trf
->modulator_sys_clk_ctrl
& 0xf8) |
1204 TRF7970A_MODULATOR_DEPTH_ASK10
;
1205 trf
->guard_time
= TRF7970A_GUARD_TIME_NFCF
;
1207 case NFC_DIGITAL_RF_TECH_ISO15693
:
1208 trf
->iso_ctrl_tech
= TRF7970A_ISO_CTRL_15693_SGL_1OF4_2648
;
1209 trf
->modulator_sys_clk_ctrl
=
1210 (trf
->modulator_sys_clk_ctrl
& 0xf8) |
1211 TRF7970A_MODULATOR_DEPTH_OOK
;
1212 trf
->guard_time
= TRF7970A_GUARD_TIME_15693
;
1215 dev_dbg(trf
->dev
, "Unsupported rf technology: %d\n", tech
);
1219 trf
->technology
= tech
;
1221 /* If in initiator mode and not changing the RF tech due to a
1222 * PSL sequence (indicated by 'trf->iso_ctrl == 0xff' from
1223 * trf7970a_init()), clear the NFC Target Detection Level register
1226 if (trf
->iso_ctrl
== 0xff)
1227 ret
= trf7970a_write(trf
, TRF7970A_NFC_TARGET_LEVEL
, 0);
1232 static int trf7970a_is_rf_field(struct trf7970a
*trf
, bool *is_rf_field
)
1237 ret
= trf7970a_write(trf
, TRF7970A_CHIP_STATUS_CTRL
,
1238 trf
->chip_status_ctrl
|
1239 TRF7970A_CHIP_STATUS_REC_ON
);
1243 ret
= trf7970a_cmd(trf
, TRF7970A_CMD_TEST_EXT_RF
);
1247 usleep_range(50, 60);
1249 ret
= trf7970a_read(trf
, TRF7970A_RSSI_OSC_STATUS
, &rssi
);
1253 ret
= trf7970a_write(trf
, TRF7970A_CHIP_STATUS_CTRL
,
1254 trf
->chip_status_ctrl
);
1258 if (rssi
& TRF7970A_RSSI_OSC_STATUS_RSSI_MASK
)
1259 *is_rf_field
= true;
1261 *is_rf_field
= false;
1266 static int trf7970a_in_config_framing(struct trf7970a
*trf
, int framing
)
1268 u8 iso_ctrl
= trf
->iso_ctrl_tech
;
1269 bool is_rf_field
= false;
1272 dev_dbg(trf
->dev
, "framing: %d\n", framing
);
1275 case NFC_DIGITAL_FRAMING_NFCA_SHORT
:
1276 case NFC_DIGITAL_FRAMING_NFCA_STANDARD
:
1277 trf
->tx_cmd
= TRF7970A_CMD_TRANSMIT_NO_CRC
;
1278 iso_ctrl
|= TRF7970A_ISO_CTRL_RX_CRC_N
;
1280 case NFC_DIGITAL_FRAMING_NFCA_STANDARD_WITH_CRC_A
:
1281 case NFC_DIGITAL_FRAMING_NFCA_T4T
:
1282 case NFC_DIGITAL_FRAMING_NFCB
:
1283 case NFC_DIGITAL_FRAMING_NFCB_T4T
:
1284 case NFC_DIGITAL_FRAMING_NFCF
:
1285 case NFC_DIGITAL_FRAMING_NFCF_T3T
:
1286 case NFC_DIGITAL_FRAMING_ISO15693_INVENTORY
:
1287 case NFC_DIGITAL_FRAMING_ISO15693_T5T
:
1288 case NFC_DIGITAL_FRAMING_NFCA_NFC_DEP
:
1289 case NFC_DIGITAL_FRAMING_NFCF_NFC_DEP
:
1290 trf
->tx_cmd
= TRF7970A_CMD_TRANSMIT
;
1291 iso_ctrl
&= ~TRF7970A_ISO_CTRL_RX_CRC_N
;
1293 case NFC_DIGITAL_FRAMING_NFCA_T2T
:
1294 trf
->tx_cmd
= TRF7970A_CMD_TRANSMIT
;
1295 iso_ctrl
|= TRF7970A_ISO_CTRL_RX_CRC_N
;
1298 dev_dbg(trf
->dev
, "Unsupported Framing: %d\n", framing
);
1302 trf
->framing
= framing
;
1304 if (!(trf
->chip_status_ctrl
& TRF7970A_CHIP_STATUS_RF_ON
)) {
1305 ret
= trf7970a_is_rf_field(trf
, &is_rf_field
);
1313 if (iso_ctrl
!= trf
->iso_ctrl
) {
1314 ret
= trf7970a_write(trf
, TRF7970A_ISO_CTRL
, iso_ctrl
);
1318 trf
->iso_ctrl
= iso_ctrl
;
1320 ret
= trf7970a_write(trf
, TRF7970A_MODULATOR_SYS_CLK_CTRL
,
1321 trf
->modulator_sys_clk_ctrl
);
1326 if (!(trf
->chip_status_ctrl
& TRF7970A_CHIP_STATUS_RF_ON
)) {
1327 ret
= trf7970a_write(trf
, TRF7970A_CHIP_STATUS_CTRL
,
1328 trf
->chip_status_ctrl
|
1329 TRF7970A_CHIP_STATUS_RF_ON
);
1333 trf
->chip_status_ctrl
|= TRF7970A_CHIP_STATUS_RF_ON
;
1335 usleep_range(trf
->guard_time
, trf
->guard_time
+ 1000);
1341 static int trf7970a_in_configure_hw(struct nfc_digital_dev
*ddev
, int type
,
1344 struct trf7970a
*trf
= nfc_digital_get_drvdata(ddev
);
1347 dev_dbg(trf
->dev
, "Configure hw - type: %d, param: %d\n", type
, param
);
1349 mutex_lock(&trf
->lock
);
1351 trf
->is_initiator
= true;
1353 if ((trf
->state
== TRF7970A_ST_PWR_OFF
) ||
1354 (trf
->state
== TRF7970A_ST_RF_OFF
)) {
1355 ret
= trf7970a_switch_rf_on(trf
);
1361 case NFC_DIGITAL_CONFIG_RF_TECH
:
1362 ret
= trf7970a_in_config_rf_tech(trf
, param
);
1364 case NFC_DIGITAL_CONFIG_FRAMING
:
1365 ret
= trf7970a_in_config_framing(trf
, param
);
1368 dev_dbg(trf
->dev
, "Unknown type: %d\n", type
);
1373 mutex_unlock(&trf
->lock
);
1377 static int trf7970a_is_iso15693_write_or_lock(u8 cmd
)
1380 case ISO15693_CMD_WRITE_SINGLE_BLOCK
:
1381 case ISO15693_CMD_LOCK_BLOCK
:
1382 case ISO15693_CMD_WRITE_MULTIPLE_BLOCK
:
1383 case ISO15693_CMD_WRITE_AFI
:
1384 case ISO15693_CMD_LOCK_AFI
:
1385 case ISO15693_CMD_WRITE_DSFID
:
1386 case ISO15693_CMD_LOCK_DSFID
:
1394 static int trf7970a_per_cmd_config(struct trf7970a
*trf
, struct sk_buff
*skb
)
1396 u8
*req
= skb
->data
;
1397 u8 special_fcn_reg1
, iso_ctrl
;
1400 trf
->issue_eof
= false;
1402 /* When issuing Type 2 read command, make sure the '4_bit_RX' bit in
1403 * special functions register 1 is cleared; otherwise, its a write or
1404 * sector select command and '4_bit_RX' must be set.
1406 * When issuing an ISO 15693 command, inspect the flags byte to see
1407 * what speed to use. Also, remember if the OPTION flag is set on
1408 * a Type 5 write or lock command so the driver will know that it
1409 * has to send an EOF in order to get a response.
1411 if ((trf
->technology
== NFC_DIGITAL_RF_TECH_106A
) &&
1412 (trf
->framing
== NFC_DIGITAL_FRAMING_NFCA_T2T
)) {
1413 if (req
[0] == NFC_T2T_CMD_READ
)
1414 special_fcn_reg1
= 0;
1416 special_fcn_reg1
= TRF7970A_SPECIAL_FCN_REG1_4_BIT_RX
;
1418 if (special_fcn_reg1
!= trf
->special_fcn_reg1
) {
1419 ret
= trf7970a_write(trf
, TRF7970A_SPECIAL_FCN_REG1
,
1424 trf
->special_fcn_reg1
= special_fcn_reg1
;
1426 } else if (trf
->technology
== NFC_DIGITAL_RF_TECH_ISO15693
) {
1427 iso_ctrl
= trf
->iso_ctrl
& ~TRF7970A_ISO_CTRL_RFID_SPEED_MASK
;
1429 switch (req
[0] & ISO15693_REQ_FLAG_SPEED_MASK
) {
1431 iso_ctrl
|= TRF7970A_ISO_CTRL_15693_SGL_1OF4_662
;
1433 case ISO15693_REQ_FLAG_SUB_CARRIER
:
1434 iso_ctrl
|= TRF7970A_ISO_CTRL_15693_DBL_1OF4_667a
;
1436 case ISO15693_REQ_FLAG_DATA_RATE
:
1437 iso_ctrl
|= TRF7970A_ISO_CTRL_15693_SGL_1OF4_2648
;
1439 case (ISO15693_REQ_FLAG_SUB_CARRIER
|
1440 ISO15693_REQ_FLAG_DATA_RATE
):
1441 iso_ctrl
|= TRF7970A_ISO_CTRL_15693_DBL_1OF4_2669
;
1445 if (iso_ctrl
!= trf
->iso_ctrl
) {
1446 ret
= trf7970a_write(trf
, TRF7970A_ISO_CTRL
, iso_ctrl
);
1450 trf
->iso_ctrl
= iso_ctrl
;
1453 if ((trf
->framing
== NFC_DIGITAL_FRAMING_ISO15693_T5T
) &&
1454 trf7970a_is_iso15693_write_or_lock(req
[1]) &&
1455 (req
[0] & ISO15693_REQ_FLAG_OPTION
))
1456 trf
->issue_eof
= true;
1462 static int trf7970a_send_cmd(struct nfc_digital_dev
*ddev
,
1463 struct sk_buff
*skb
, u16 timeout
,
1464 nfc_digital_cmd_complete_t cb
, void *arg
)
1466 struct trf7970a
*trf
= nfc_digital_get_drvdata(ddev
);
1472 dev_dbg(trf
->dev
, "New request - state: %d, timeout: %d ms, len: %d\n",
1473 trf
->state
, timeout
, skb
->len
);
1475 if (skb
->len
> TRF7970A_TX_MAX
)
1478 mutex_lock(&trf
->lock
);
1480 if ((trf
->state
!= TRF7970A_ST_IDLE
) &&
1481 (trf
->state
!= TRF7970A_ST_IDLE_RX_BLOCKED
)) {
1482 dev_err(trf
->dev
, "%s - Bogus state: %d\n", __func__
,
1488 if (trf
->aborting
) {
1489 dev_dbg(trf
->dev
, "Abort process complete\n");
1490 trf
->aborting
= false;
1496 trf
->rx_skb
= nfc_alloc_recv_skb(TRF7970A_RX_SKB_ALLOC_SIZE
,
1499 dev_dbg(trf
->dev
, "Can't alloc rx_skb\n");
1505 if (trf
->state
== TRF7970A_ST_IDLE_RX_BLOCKED
) {
1506 ret
= trf7970a_cmd(trf
, TRF7970A_CMD_ENABLE_RX
);
1510 trf
->state
= TRF7970A_ST_IDLE
;
1513 if (trf
->is_initiator
) {
1514 ret
= trf7970a_per_cmd_config(trf
, skb
);
1523 trf
->timeout
= timeout
;
1524 trf
->ignore_timeout
= false;
1528 /* TX data must be prefixed with a FIFO reset cmd, a cmd that depends
1529 * on what the current framing is, the address of the TX length byte 1
1530 * register (0x1d), and the 2 byte length of the data to be transmitted.
1531 * That totals 5 bytes.
1533 prefix
[0] = TRF7970A_CMD_BIT_CTRL
|
1534 TRF7970A_CMD_BIT_OPCODE(TRF7970A_CMD_FIFO_RESET
);
1535 prefix
[1] = TRF7970A_CMD_BIT_CTRL
|
1536 TRF7970A_CMD_BIT_OPCODE(trf
->tx_cmd
);
1537 prefix
[2] = TRF7970A_CMD_BIT_CONTINUOUS
| TRF7970A_TX_LENGTH_BYTE1
;
1539 if (trf
->framing
== NFC_DIGITAL_FRAMING_NFCA_SHORT
) {
1541 prefix
[4] = 0x0f; /* 7 bits */
1543 prefix
[3] = (len
& 0xf00) >> 4;
1544 prefix
[3] |= ((len
& 0xf0) >> 4);
1545 prefix
[4] = ((len
& 0x0f) << 4);
1548 len
= min_t(int, skb
->len
, TRF7970A_FIFO_SIZE
);
1550 /* Clear possible spurious interrupt */
1551 ret
= trf7970a_read_irqstatus(trf
, &status
);
1555 ret
= trf7970a_transmit(trf
, skb
, len
, prefix
, sizeof(prefix
));
1557 kfree_skb(trf
->rx_skb
);
1562 mutex_unlock(&trf
->lock
);
1566 static int trf7970a_tg_config_rf_tech(struct trf7970a
*trf
, int tech
)
1570 dev_dbg(trf
->dev
, "rf technology: %d\n", tech
);
1573 case NFC_DIGITAL_RF_TECH_106A
:
1574 trf
->iso_ctrl_tech
= TRF7970A_ISO_CTRL_NFC_NFC_CE_MODE
|
1575 TRF7970A_ISO_CTRL_NFC_CE
| TRF7970A_ISO_CTRL_NFC_CE_14443A
;
1576 trf
->modulator_sys_clk_ctrl
=
1577 (trf
->modulator_sys_clk_ctrl
& 0xf8) |
1578 TRF7970A_MODULATOR_DEPTH_OOK
;
1580 case NFC_DIGITAL_RF_TECH_212F
:
1581 trf
->iso_ctrl_tech
= TRF7970A_ISO_CTRL_NFC_NFC_CE_MODE
|
1582 TRF7970A_ISO_CTRL_NFC_NFCF_212
;
1583 trf
->modulator_sys_clk_ctrl
=
1584 (trf
->modulator_sys_clk_ctrl
& 0xf8) |
1585 TRF7970A_MODULATOR_DEPTH_ASK10
;
1587 case NFC_DIGITAL_RF_TECH_424F
:
1588 trf
->iso_ctrl_tech
= TRF7970A_ISO_CTRL_NFC_NFC_CE_MODE
|
1589 TRF7970A_ISO_CTRL_NFC_NFCF_424
;
1590 trf
->modulator_sys_clk_ctrl
=
1591 (trf
->modulator_sys_clk_ctrl
& 0xf8) |
1592 TRF7970A_MODULATOR_DEPTH_ASK10
;
1595 dev_dbg(trf
->dev
, "Unsupported rf technology: %d\n", tech
);
1599 trf
->technology
= tech
;
1601 /* Normally we write the ISO_CTRL register in
1602 * trf7970a_tg_config_framing() because the framing can change
1603 * the value written. However, when sending a PSL RES,
1604 * digital_tg_send_psl_res_complete() doesn't call
1605 * trf7970a_tg_config_framing() so we must write the register
1608 if ((trf
->framing
== NFC_DIGITAL_FRAMING_NFC_DEP_ACTIVATED
) &&
1609 (trf
->iso_ctrl_tech
!= trf
->iso_ctrl
)) {
1610 ret
= trf7970a_write(trf
, TRF7970A_ISO_CTRL
,
1611 trf
->iso_ctrl_tech
);
1613 trf
->iso_ctrl
= trf
->iso_ctrl_tech
;
1619 /* Since this is a target routine, several of the framing calls are
1620 * made between receiving the request and sending the response so they
1621 * should take effect until after the response is sent. This is accomplished
1622 * by skipping the ISO_CTRL register write here and doing it in the interrupt
1625 static int trf7970a_tg_config_framing(struct trf7970a
*trf
, int framing
)
1627 u8 iso_ctrl
= trf
->iso_ctrl_tech
;
1630 dev_dbg(trf
->dev
, "framing: %d\n", framing
);
1633 case NFC_DIGITAL_FRAMING_NFCA_NFC_DEP
:
1634 trf
->tx_cmd
= TRF7970A_CMD_TRANSMIT_NO_CRC
;
1635 iso_ctrl
|= TRF7970A_ISO_CTRL_RX_CRC_N
;
1637 case NFC_DIGITAL_FRAMING_NFCA_STANDARD
:
1638 case NFC_DIGITAL_FRAMING_NFCA_STANDARD_WITH_CRC_A
:
1639 case NFC_DIGITAL_FRAMING_NFCA_ANTICOL_COMPLETE
:
1640 /* These ones are applied in the interrupt handler */
1641 iso_ctrl
= trf
->iso_ctrl
; /* Don't write to ISO_CTRL yet */
1643 case NFC_DIGITAL_FRAMING_NFCF_NFC_DEP
:
1644 trf
->tx_cmd
= TRF7970A_CMD_TRANSMIT
;
1645 iso_ctrl
&= ~TRF7970A_ISO_CTRL_RX_CRC_N
;
1647 case NFC_DIGITAL_FRAMING_NFC_DEP_ACTIVATED
:
1648 trf
->tx_cmd
= TRF7970A_CMD_TRANSMIT
;
1649 iso_ctrl
&= ~TRF7970A_ISO_CTRL_RX_CRC_N
;
1652 dev_dbg(trf
->dev
, "Unsupported Framing: %d\n", framing
);
1656 trf
->framing
= framing
;
1658 if (iso_ctrl
!= trf
->iso_ctrl
) {
1659 ret
= trf7970a_write(trf
, TRF7970A_ISO_CTRL
, iso_ctrl
);
1663 trf
->iso_ctrl
= iso_ctrl
;
1665 ret
= trf7970a_write(trf
, TRF7970A_MODULATOR_SYS_CLK_CTRL
,
1666 trf
->modulator_sys_clk_ctrl
);
1671 if (!(trf
->chip_status_ctrl
& TRF7970A_CHIP_STATUS_RF_ON
)) {
1672 ret
= trf7970a_write(trf
, TRF7970A_CHIP_STATUS_CTRL
,
1673 trf
->chip_status_ctrl
|
1674 TRF7970A_CHIP_STATUS_RF_ON
);
1678 trf
->chip_status_ctrl
|= TRF7970A_CHIP_STATUS_RF_ON
;
1684 static int trf7970a_tg_configure_hw(struct nfc_digital_dev
*ddev
, int type
,
1687 struct trf7970a
*trf
= nfc_digital_get_drvdata(ddev
);
1690 dev_dbg(trf
->dev
, "Configure hw - type: %d, param: %d\n", type
, param
);
1692 mutex_lock(&trf
->lock
);
1694 trf
->is_initiator
= false;
1696 if ((trf
->state
== TRF7970A_ST_PWR_OFF
) ||
1697 (trf
->state
== TRF7970A_ST_RF_OFF
)) {
1698 ret
= trf7970a_switch_rf_on(trf
);
1704 case NFC_DIGITAL_CONFIG_RF_TECH
:
1705 ret
= trf7970a_tg_config_rf_tech(trf
, param
);
1707 case NFC_DIGITAL_CONFIG_FRAMING
:
1708 ret
= trf7970a_tg_config_framing(trf
, param
);
1711 dev_dbg(trf
->dev
, "Unknown type: %d\n", type
);
1716 mutex_unlock(&trf
->lock
);
1720 static int _trf7970a_tg_listen(struct nfc_digital_dev
*ddev
, u16 timeout
,
1721 nfc_digital_cmd_complete_t cb
, void *arg
,
1724 struct trf7970a
*trf
= nfc_digital_get_drvdata(ddev
);
1727 mutex_lock(&trf
->lock
);
1729 if ((trf
->state
!= TRF7970A_ST_IDLE
) &&
1730 (trf
->state
!= TRF7970A_ST_IDLE_RX_BLOCKED
)) {
1731 dev_err(trf
->dev
, "%s - Bogus state: %d\n", __func__
,
1737 if (trf
->aborting
) {
1738 dev_dbg(trf
->dev
, "Abort process complete\n");
1739 trf
->aborting
= false;
1744 trf
->rx_skb
= nfc_alloc_recv_skb(TRF7970A_RX_SKB_ALLOC_SIZE
,
1747 dev_dbg(trf
->dev
, "Can't alloc rx_skb\n");
1752 ret
= trf7970a_write(trf
, TRF7970A_RX_SPECIAL_SETTINGS
,
1753 TRF7970A_RX_SPECIAL_SETTINGS_HBT
|
1754 TRF7970A_RX_SPECIAL_SETTINGS_M848
|
1755 TRF7970A_RX_SPECIAL_SETTINGS_C424
|
1756 TRF7970A_RX_SPECIAL_SETTINGS_C212
);
1760 ret
= trf7970a_write(trf
, TRF7970A_REG_IO_CTRL
,
1761 trf
->io_ctrl
| TRF7970A_REG_IO_CTRL_VRS(0x1));
1765 ret
= trf7970a_write(trf
, TRF7970A_NFC_LOW_FIELD_LEVEL
,
1766 TRF7970A_NFC_LOW_FIELD_LEVEL_RFDET(0x3));
1770 ret
= trf7970a_write(trf
, TRF7970A_NFC_TARGET_LEVEL
,
1771 TRF7970A_NFC_TARGET_LEVEL_RFDET(0x7));
1778 trf
->timeout
= timeout
;
1779 trf
->ignore_timeout
= false;
1781 ret
= trf7970a_cmd(trf
, TRF7970A_CMD_ENABLE_RX
);
1785 trf
->state
= mode_detect
? TRF7970A_ST_LISTENING_MD
:
1786 TRF7970A_ST_LISTENING
;
1788 schedule_delayed_work(&trf
->timeout_work
, msecs_to_jiffies(timeout
));
1791 mutex_unlock(&trf
->lock
);
1795 static int trf7970a_tg_listen(struct nfc_digital_dev
*ddev
, u16 timeout
,
1796 nfc_digital_cmd_complete_t cb
, void *arg
)
1798 struct trf7970a
*trf
= nfc_digital_get_drvdata(ddev
);
1800 dev_dbg(trf
->dev
, "Listen - state: %d, timeout: %d ms\n",
1801 trf
->state
, timeout
);
1803 return _trf7970a_tg_listen(ddev
, timeout
, cb
, arg
, false);
1806 static int trf7970a_tg_listen_md(struct nfc_digital_dev
*ddev
,
1807 u16 timeout
, nfc_digital_cmd_complete_t cb
,
1810 struct trf7970a
*trf
= nfc_digital_get_drvdata(ddev
);
1813 dev_dbg(trf
->dev
, "Listen MD - state: %d, timeout: %d ms\n",
1814 trf
->state
, timeout
);
1816 ret
= trf7970a_tg_configure_hw(ddev
, NFC_DIGITAL_CONFIG_RF_TECH
,
1817 NFC_DIGITAL_RF_TECH_106A
);
1821 ret
= trf7970a_tg_configure_hw(ddev
, NFC_DIGITAL_CONFIG_FRAMING
,
1822 NFC_DIGITAL_FRAMING_NFCA_NFC_DEP
);
1826 return _trf7970a_tg_listen(ddev
, timeout
, cb
, arg
, true);
1829 static int trf7970a_tg_get_rf_tech(struct nfc_digital_dev
*ddev
, u8
*rf_tech
)
1831 struct trf7970a
*trf
= nfc_digital_get_drvdata(ddev
);
1833 dev_dbg(trf
->dev
, "Get RF Tech - state: %d, rf_tech: %d\n",
1834 trf
->state
, trf
->md_rf_tech
);
1836 *rf_tech
= trf
->md_rf_tech
;
1841 static void trf7970a_abort_cmd(struct nfc_digital_dev
*ddev
)
1843 struct trf7970a
*trf
= nfc_digital_get_drvdata(ddev
);
1845 dev_dbg(trf
->dev
, "Abort process initiated\n");
1847 mutex_lock(&trf
->lock
);
1849 switch (trf
->state
) {
1850 case TRF7970A_ST_WAIT_FOR_TX_FIFO
:
1851 case TRF7970A_ST_WAIT_FOR_RX_DATA
:
1852 case TRF7970A_ST_WAIT_FOR_RX_DATA_CONT
:
1853 case TRF7970A_ST_WAIT_TO_ISSUE_EOF
:
1854 trf
->aborting
= true;
1856 case TRF7970A_ST_LISTENING
:
1857 trf
->ignore_timeout
= !cancel_delayed_work(&trf
->timeout_work
);
1858 trf7970a_send_err_upstream(trf
, -ECANCELED
);
1859 dev_dbg(trf
->dev
, "Abort process complete\n");
1865 mutex_unlock(&trf
->lock
);
1868 static struct nfc_digital_ops trf7970a_nfc_ops
= {
1869 .in_configure_hw
= trf7970a_in_configure_hw
,
1870 .in_send_cmd
= trf7970a_send_cmd
,
1871 .tg_configure_hw
= trf7970a_tg_configure_hw
,
1872 .tg_send_cmd
= trf7970a_send_cmd
,
1873 .tg_listen
= trf7970a_tg_listen
,
1874 .tg_listen_md
= trf7970a_tg_listen_md
,
1875 .tg_get_rf_tech
= trf7970a_tg_get_rf_tech
,
1876 .switch_rf
= trf7970a_switch_rf
,
1877 .abort_cmd
= trf7970a_abort_cmd
,
1880 static int trf7970a_power_up(struct trf7970a
*trf
)
1884 dev_dbg(trf
->dev
, "Powering up - state: %d\n", trf
->state
);
1886 if (trf
->state
!= TRF7970A_ST_PWR_OFF
)
1889 ret
= regulator_enable(trf
->regulator
);
1891 dev_err(trf
->dev
, "%s - Can't enable VIN: %d\n", __func__
, ret
);
1895 usleep_range(5000, 6000);
1897 if (trf
->en2_gpiod
&&
1898 !(trf
->quirks
& TRF7970A_QUIRK_EN2_MUST_STAY_LOW
)) {
1899 gpiod_set_value_cansleep(trf
->en2_gpiod
, 1);
1900 usleep_range(1000, 2000);
1903 gpiod_set_value_cansleep(trf
->en_gpiod
, 1);
1905 usleep_range(20000, 21000);
1907 trf
->state
= TRF7970A_ST_RF_OFF
;
1912 static int trf7970a_power_down(struct trf7970a
*trf
)
1916 dev_dbg(trf
->dev
, "Powering down - state: %d\n", trf
->state
);
1918 if (trf
->state
== TRF7970A_ST_PWR_OFF
)
1921 if (trf
->state
!= TRF7970A_ST_RF_OFF
) {
1922 dev_dbg(trf
->dev
, "Can't power down - not RF_OFF state (%d)\n",
1927 gpiod_set_value_cansleep(trf
->en_gpiod
, 0);
1929 if (trf
->en2_gpiod
&& !(trf
->quirks
& TRF7970A_QUIRK_EN2_MUST_STAY_LOW
))
1930 gpiod_set_value_cansleep(trf
->en2_gpiod
, 0);
1932 ret
= regulator_disable(trf
->regulator
);
1934 dev_err(trf
->dev
, "%s - Can't disable VIN: %d\n", __func__
,
1937 trf
->state
= TRF7970A_ST_PWR_OFF
;
1942 static int trf7970a_startup(struct trf7970a
*trf
)
1946 ret
= trf7970a_power_up(trf
);
1950 pm_runtime_set_active(trf
->dev
);
1951 pm_runtime_enable(trf
->dev
);
1952 pm_runtime_mark_last_busy(trf
->dev
);
1957 static void trf7970a_shutdown(struct trf7970a
*trf
)
1959 switch (trf
->state
) {
1960 case TRF7970A_ST_WAIT_FOR_TX_FIFO
:
1961 case TRF7970A_ST_WAIT_FOR_RX_DATA
:
1962 case TRF7970A_ST_WAIT_FOR_RX_DATA_CONT
:
1963 case TRF7970A_ST_WAIT_TO_ISSUE_EOF
:
1964 case TRF7970A_ST_LISTENING
:
1965 trf7970a_send_err_upstream(trf
, -ECANCELED
);
1967 case TRF7970A_ST_IDLE
:
1968 case TRF7970A_ST_IDLE_RX_BLOCKED
:
1969 trf7970a_switch_rf_off(trf
);
1975 pm_runtime_disable(trf
->dev
);
1976 pm_runtime_set_suspended(trf
->dev
);
1978 trf7970a_power_down(trf
);
1981 static int trf7970a_get_autosuspend_delay(struct device_node
*np
)
1983 int autosuspend_delay
, ret
;
1985 ret
= of_property_read_u32(np
, "autosuspend-delay", &autosuspend_delay
);
1987 autosuspend_delay
= TRF7970A_AUTOSUSPEND_DELAY
;
1989 return autosuspend_delay
;
1992 static int trf7970a_probe(struct spi_device
*spi
)
1994 struct device_node
*np
= spi
->dev
.of_node
;
1995 struct trf7970a
*trf
;
1996 int uvolts
, autosuspend_delay
, ret
;
1997 u32 clk_freq
= TRF7970A_13MHZ_CLOCK_FREQUENCY
;
2000 dev_err(&spi
->dev
, "No Device Tree entry\n");
2004 trf
= devm_kzalloc(&spi
->dev
, sizeof(*trf
), GFP_KERNEL
);
2008 trf
->state
= TRF7970A_ST_PWR_OFF
;
2009 trf
->dev
= &spi
->dev
;
2012 spi
->mode
= SPI_MODE_1
;
2013 spi
->bits_per_word
= 8;
2015 ret
= spi_setup(spi
);
2017 dev_err(trf
->dev
, "Can't set up SPI Communication\n");
2021 if (of_property_read_bool(np
, "irq-status-read-quirk"))
2022 trf
->quirks
|= TRF7970A_QUIRK_IRQ_STATUS_READ
;
2024 /* There are two enable pins - only EN must be present in the DT */
2025 trf
->en_gpiod
= devm_gpiod_get_index(trf
->dev
, "ti,enable", 0,
2027 if (IS_ERR(trf
->en_gpiod
)) {
2028 dev_err(trf
->dev
, "No EN GPIO property\n");
2029 return PTR_ERR(trf
->en_gpiod
);
2032 trf
->en2_gpiod
= devm_gpiod_get_index_optional(trf
->dev
, "ti,enable", 1,
2034 if (!trf
->en2_gpiod
) {
2035 dev_info(trf
->dev
, "No EN2 GPIO property\n");
2036 } else if (IS_ERR(trf
->en2_gpiod
)) {
2037 dev_err(trf
->dev
, "Error getting EN2 GPIO property: %ld\n",
2038 PTR_ERR(trf
->en2_gpiod
));
2039 return PTR_ERR(trf
->en2_gpiod
);
2040 } else if (of_property_read_bool(np
, "en2-rf-quirk")) {
2041 trf
->quirks
|= TRF7970A_QUIRK_EN2_MUST_STAY_LOW
;
2044 of_property_read_u32(np
, "clock-frequency", &clk_freq
);
2045 if ((clk_freq
!= TRF7970A_27MHZ_CLOCK_FREQUENCY
) &&
2046 (clk_freq
!= TRF7970A_13MHZ_CLOCK_FREQUENCY
)) {
2048 "clock-frequency (%u Hz) unsupported\n", clk_freq
);
2052 if (clk_freq
== TRF7970A_27MHZ_CLOCK_FREQUENCY
) {
2053 trf
->modulator_sys_clk_ctrl
= TRF7970A_MODULATOR_27MHZ
;
2054 dev_dbg(trf
->dev
, "trf7970a configured for 27MHz crystal\n");
2056 trf
->modulator_sys_clk_ctrl
= 0;
2059 ret
= devm_request_threaded_irq(trf
->dev
, spi
->irq
, NULL
,
2061 IRQF_TRIGGER_RISING
| IRQF_ONESHOT
,
2064 dev_err(trf
->dev
, "Can't request IRQ#%d: %d\n", spi
->irq
, ret
);
2068 mutex_init(&trf
->lock
);
2069 INIT_DELAYED_WORK(&trf
->timeout_work
, trf7970a_timeout_work_handler
);
2071 trf
->regulator
= devm_regulator_get(&spi
->dev
, "vin");
2072 if (IS_ERR(trf
->regulator
)) {
2073 ret
= PTR_ERR(trf
->regulator
);
2074 dev_err(trf
->dev
, "Can't get VIN regulator: %d\n", ret
);
2075 goto err_destroy_lock
;
2078 ret
= regulator_enable(trf
->regulator
);
2080 dev_err(trf
->dev
, "Can't enable VIN: %d\n", ret
);
2081 goto err_destroy_lock
;
2084 uvolts
= regulator_get_voltage(trf
->regulator
);
2085 if (uvolts
> 4000000)
2086 trf
->chip_status_ctrl
= TRF7970A_CHIP_STATUS_VRS5_3
;
2088 trf
->regulator
= devm_regulator_get(&spi
->dev
, "vdd-io");
2089 if (IS_ERR(trf
->regulator
)) {
2090 ret
= PTR_ERR(trf
->regulator
);
2091 dev_err(trf
->dev
, "Can't get VDD_IO regulator: %d\n", ret
);
2092 goto err_destroy_lock
;
2095 ret
= regulator_enable(trf
->regulator
);
2097 dev_err(trf
->dev
, "Can't enable VDD_IO: %d\n", ret
);
2098 goto err_destroy_lock
;
2101 if (regulator_get_voltage(trf
->regulator
) == 1800000) {
2102 trf
->io_ctrl
= TRF7970A_REG_IO_CTRL_IO_LOW
;
2103 dev_dbg(trf
->dev
, "trf7970a config vdd_io to 1.8V\n");
2106 trf
->ddev
= nfc_digital_allocate_device(&trf7970a_nfc_ops
,
2107 TRF7970A_SUPPORTED_PROTOCOLS
,
2108 NFC_DIGITAL_DRV_CAPS_IN_CRC
|
2109 NFC_DIGITAL_DRV_CAPS_TG_CRC
, 0,
2112 dev_err(trf
->dev
, "Can't allocate NFC digital device\n");
2114 goto err_disable_regulator
;
2117 nfc_digital_set_parent_dev(trf
->ddev
, trf
->dev
);
2118 nfc_digital_set_drvdata(trf
->ddev
, trf
);
2119 spi_set_drvdata(spi
, trf
);
2121 autosuspend_delay
= trf7970a_get_autosuspend_delay(np
);
2123 pm_runtime_set_autosuspend_delay(trf
->dev
, autosuspend_delay
);
2124 pm_runtime_use_autosuspend(trf
->dev
);
2126 ret
= trf7970a_startup(trf
);
2130 ret
= nfc_digital_register_device(trf
->ddev
);
2132 dev_err(trf
->dev
, "Can't register NFC digital device: %d\n",
2140 trf7970a_shutdown(trf
);
2142 nfc_digital_free_device(trf
->ddev
);
2143 err_disable_regulator
:
2144 regulator_disable(trf
->regulator
);
2146 mutex_destroy(&trf
->lock
);
2150 static int trf7970a_remove(struct spi_device
*spi
)
2152 struct trf7970a
*trf
= spi_get_drvdata(spi
);
2154 mutex_lock(&trf
->lock
);
2156 trf7970a_shutdown(trf
);
2158 mutex_unlock(&trf
->lock
);
2160 nfc_digital_unregister_device(trf
->ddev
);
2161 nfc_digital_free_device(trf
->ddev
);
2163 regulator_disable(trf
->regulator
);
2165 mutex_destroy(&trf
->lock
);
2170 #ifdef CONFIG_PM_SLEEP
2171 static int trf7970a_suspend(struct device
*dev
)
2173 struct spi_device
*spi
= to_spi_device(dev
);
2174 struct trf7970a
*trf
= spi_get_drvdata(spi
);
2176 dev_dbg(dev
, "Suspend\n");
2178 mutex_lock(&trf
->lock
);
2180 trf7970a_shutdown(trf
);
2182 mutex_unlock(&trf
->lock
);
2187 static int trf7970a_resume(struct device
*dev
)
2189 struct spi_device
*spi
= to_spi_device(dev
);
2190 struct trf7970a
*trf
= spi_get_drvdata(spi
);
2193 dev_dbg(dev
, "Resume\n");
2195 mutex_lock(&trf
->lock
);
2197 ret
= trf7970a_startup(trf
);
2199 mutex_unlock(&trf
->lock
);
2206 static int trf7970a_pm_runtime_suspend(struct device
*dev
)
2208 struct spi_device
*spi
= to_spi_device(dev
);
2209 struct trf7970a
*trf
= spi_get_drvdata(spi
);
2212 dev_dbg(dev
, "Runtime suspend\n");
2214 mutex_lock(&trf
->lock
);
2216 ret
= trf7970a_power_down(trf
);
2218 mutex_unlock(&trf
->lock
);
2223 static int trf7970a_pm_runtime_resume(struct device
*dev
)
2225 struct spi_device
*spi
= to_spi_device(dev
);
2226 struct trf7970a
*trf
= spi_get_drvdata(spi
);
2229 dev_dbg(dev
, "Runtime resume\n");
2231 ret
= trf7970a_power_up(trf
);
2233 pm_runtime_mark_last_busy(dev
);
2239 static const struct dev_pm_ops trf7970a_pm_ops
= {
2240 SET_SYSTEM_SLEEP_PM_OPS(trf7970a_suspend
, trf7970a_resume
)
2241 SET_RUNTIME_PM_OPS(trf7970a_pm_runtime_suspend
,
2242 trf7970a_pm_runtime_resume
, NULL
)
2245 static const struct of_device_id trf7970a_of_match
[] = {
2246 {.compatible
= "ti,trf7970a",},
2250 MODULE_DEVICE_TABLE(of
, trf7970a_of_match
);
2252 static const struct spi_device_id trf7970a_id_table
[] = {
2257 MODULE_DEVICE_TABLE(spi
, trf7970a_id_table
);
2259 static struct spi_driver trf7970a_spi_driver
= {
2260 .probe
= trf7970a_probe
,
2261 .remove
= trf7970a_remove
,
2262 .id_table
= trf7970a_id_table
,
2265 .of_match_table
= of_match_ptr(trf7970a_of_match
),
2266 .pm
= &trf7970a_pm_ops
,
2270 module_spi_driver(trf7970a_spi_driver
);
2272 MODULE_AUTHOR("Mark A. Greer <mgreer@animalcreek.com>");
2273 MODULE_LICENSE("GPL v2");
2274 MODULE_DESCRIPTION("TI trf7970a RFID/NFC Transceiver Driver");