Linux 4.19.133
[linux/fpc-iii.git] / drivers / s390 / cio / qdio_main.c
blob4b7cc8d425b1c64c6b27e4f3308d4152362a0e21
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Linux for s390 qdio support, buffer handling, qdio API and module support.
5 * Copyright IBM Corp. 2000, 2008
6 * Author(s): Utz Bacher <utz.bacher@de.ibm.com>
7 * Jan Glauber <jang@linux.vnet.ibm.com>
8 * 2.6 cio integration by Cornelia Huck <cornelia.huck@de.ibm.com>
9 */
10 #include <linux/module.h>
11 #include <linux/init.h>
12 #include <linux/kernel.h>
13 #include <linux/timer.h>
14 #include <linux/delay.h>
15 #include <linux/gfp.h>
16 #include <linux/io.h>
17 #include <linux/atomic.h>
18 #include <asm/debug.h>
19 #include <asm/qdio.h>
20 #include <asm/ipl.h>
22 #include "cio.h"
23 #include "css.h"
24 #include "device.h"
25 #include "qdio.h"
26 #include "qdio_debug.h"
28 MODULE_AUTHOR("Utz Bacher <utz.bacher@de.ibm.com>,"\
29 "Jan Glauber <jang@linux.vnet.ibm.com>");
30 MODULE_DESCRIPTION("QDIO base support");
31 MODULE_LICENSE("GPL");
33 static inline int do_siga_sync(unsigned long schid,
34 unsigned int out_mask, unsigned int in_mask,
35 unsigned int fc)
37 register unsigned long __fc asm ("0") = fc;
38 register unsigned long __schid asm ("1") = schid;
39 register unsigned long out asm ("2") = out_mask;
40 register unsigned long in asm ("3") = in_mask;
41 int cc;
43 asm volatile(
44 " siga 0\n"
45 " ipm %0\n"
46 " srl %0,28\n"
47 : "=d" (cc)
48 : "d" (__fc), "d" (__schid), "d" (out), "d" (in) : "cc");
49 return cc;
52 static inline int do_siga_input(unsigned long schid, unsigned int mask,
53 unsigned int fc)
55 register unsigned long __fc asm ("0") = fc;
56 register unsigned long __schid asm ("1") = schid;
57 register unsigned long __mask asm ("2") = mask;
58 int cc;
60 asm volatile(
61 " siga 0\n"
62 " ipm %0\n"
63 " srl %0,28\n"
64 : "=d" (cc)
65 : "d" (__fc), "d" (__schid), "d" (__mask) : "cc");
66 return cc;
69 /**
70 * do_siga_output - perform SIGA-w/wt function
71 * @schid: subchannel id or in case of QEBSM the subchannel token
72 * @mask: which output queues to process
73 * @bb: busy bit indicator, set only if SIGA-w/wt could not access a buffer
74 * @fc: function code to perform
75 * @aob: asynchronous operation block
77 * Returns condition code.
78 * Note: For IQDC unicast queues only the highest priority queue is processed.
80 static inline int do_siga_output(unsigned long schid, unsigned long mask,
81 unsigned int *bb, unsigned int fc,
82 unsigned long aob)
84 register unsigned long __fc asm("0") = fc;
85 register unsigned long __schid asm("1") = schid;
86 register unsigned long __mask asm("2") = mask;
87 register unsigned long __aob asm("3") = aob;
88 int cc;
90 asm volatile(
91 " siga 0\n"
92 " ipm %0\n"
93 " srl %0,28\n"
94 : "=d" (cc), "+d" (__fc), "+d" (__aob)
95 : "d" (__schid), "d" (__mask)
96 : "cc");
97 *bb = __fc >> 31;
98 return cc;
102 * qdio_do_eqbs - extract buffer states for QEBSM
103 * @q: queue to manipulate
104 * @state: state of the extracted buffers
105 * @start: buffer number to start at
106 * @count: count of buffers to examine
107 * @auto_ack: automatically acknowledge buffers
109 * Returns the number of successfully extracted equal buffer states.
110 * Stops processing if a state is different from the last buffers state.
112 static int qdio_do_eqbs(struct qdio_q *q, unsigned char *state,
113 int start, int count, int auto_ack)
115 int tmp_count = count, tmp_start = start, nr = q->nr;
116 unsigned int ccq = 0;
118 qperf_inc(q, eqbs);
120 if (!q->is_input_q)
121 nr += q->irq_ptr->nr_input_qs;
122 again:
123 ccq = do_eqbs(q->irq_ptr->sch_token, state, nr, &tmp_start, &tmp_count,
124 auto_ack);
126 switch (ccq) {
127 case 0:
128 case 32:
129 /* all done, or next buffer state different */
130 return count - tmp_count;
131 case 96:
132 /* not all buffers processed */
133 qperf_inc(q, eqbs_partial);
134 DBF_DEV_EVENT(DBF_WARN, q->irq_ptr, "EQBS part:%02x",
135 tmp_count);
136 return count - tmp_count;
137 case 97:
138 /* no buffer processed */
139 DBF_DEV_EVENT(DBF_WARN, q->irq_ptr, "EQBS again:%2d", ccq);
140 goto again;
141 default:
142 DBF_ERROR("%4x ccq:%3d", SCH_NO(q), ccq);
143 DBF_ERROR("%4x EQBS ERROR", SCH_NO(q));
144 DBF_ERROR("%3d%3d%2d", count, tmp_count, nr);
145 q->handler(q->irq_ptr->cdev, QDIO_ERROR_GET_BUF_STATE, q->nr,
146 q->first_to_kick, count, q->irq_ptr->int_parm);
147 return 0;
152 * qdio_do_sqbs - set buffer states for QEBSM
153 * @q: queue to manipulate
154 * @state: new state of the buffers
155 * @start: first buffer number to change
156 * @count: how many buffers to change
158 * Returns the number of successfully changed buffers.
159 * Does retrying until the specified count of buffer states is set or an
160 * error occurs.
162 static int qdio_do_sqbs(struct qdio_q *q, unsigned char state, int start,
163 int count)
165 unsigned int ccq = 0;
166 int tmp_count = count, tmp_start = start;
167 int nr = q->nr;
169 if (!count)
170 return 0;
171 qperf_inc(q, sqbs);
173 if (!q->is_input_q)
174 nr += q->irq_ptr->nr_input_qs;
175 again:
176 ccq = do_sqbs(q->irq_ptr->sch_token, state, nr, &tmp_start, &tmp_count);
178 switch (ccq) {
179 case 0:
180 case 32:
181 /* all done, or active buffer adapter-owned */
182 WARN_ON_ONCE(tmp_count);
183 return count - tmp_count;
184 case 96:
185 /* not all buffers processed */
186 DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "SQBS again:%2d", ccq);
187 qperf_inc(q, sqbs_partial);
188 goto again;
189 default:
190 DBF_ERROR("%4x ccq:%3d", SCH_NO(q), ccq);
191 DBF_ERROR("%4x SQBS ERROR", SCH_NO(q));
192 DBF_ERROR("%3d%3d%2d", count, tmp_count, nr);
193 q->handler(q->irq_ptr->cdev, QDIO_ERROR_SET_BUF_STATE, q->nr,
194 q->first_to_kick, count, q->irq_ptr->int_parm);
195 return 0;
200 * Returns number of examined buffers and their common state in *state.
201 * Requested number of buffers-to-examine must be > 0.
203 static inline int get_buf_states(struct qdio_q *q, unsigned int bufnr,
204 unsigned char *state, unsigned int count,
205 int auto_ack, int merge_pending)
207 unsigned char __state = 0;
208 int i;
210 if (is_qebsm(q))
211 return qdio_do_eqbs(q, state, bufnr, count, auto_ack);
213 /* get initial state: */
214 __state = q->slsb.val[bufnr];
215 if (merge_pending && __state == SLSB_P_OUTPUT_PENDING)
216 __state = SLSB_P_OUTPUT_EMPTY;
218 for (i = 1; i < count; i++) {
219 bufnr = next_buf(bufnr);
221 /* merge PENDING into EMPTY: */
222 if (merge_pending &&
223 q->slsb.val[bufnr] == SLSB_P_OUTPUT_PENDING &&
224 __state == SLSB_P_OUTPUT_EMPTY)
225 continue;
227 /* stop if next state differs from initial state: */
228 if (q->slsb.val[bufnr] != __state)
229 break;
231 *state = __state;
232 return i;
235 static inline int get_buf_state(struct qdio_q *q, unsigned int bufnr,
236 unsigned char *state, int auto_ack)
238 return get_buf_states(q, bufnr, state, 1, auto_ack, 0);
241 /* wrap-around safe setting of slsb states, returns number of changed buffers */
242 static inline int set_buf_states(struct qdio_q *q, int bufnr,
243 unsigned char state, int count)
245 int i;
247 if (is_qebsm(q))
248 return qdio_do_sqbs(q, state, bufnr, count);
250 for (i = 0; i < count; i++) {
251 xchg(&q->slsb.val[bufnr], state);
252 bufnr = next_buf(bufnr);
254 return count;
257 static inline int set_buf_state(struct qdio_q *q, int bufnr,
258 unsigned char state)
260 return set_buf_states(q, bufnr, state, 1);
263 /* set slsb states to initial state */
264 static void qdio_init_buf_states(struct qdio_irq *irq_ptr)
266 struct qdio_q *q;
267 int i;
269 for_each_input_queue(irq_ptr, q, i)
270 set_buf_states(q, 0, SLSB_P_INPUT_NOT_INIT,
271 QDIO_MAX_BUFFERS_PER_Q);
272 for_each_output_queue(irq_ptr, q, i)
273 set_buf_states(q, 0, SLSB_P_OUTPUT_NOT_INIT,
274 QDIO_MAX_BUFFERS_PER_Q);
277 static inline int qdio_siga_sync(struct qdio_q *q, unsigned int output,
278 unsigned int input)
280 unsigned long schid = *((u32 *) &q->irq_ptr->schid);
281 unsigned int fc = QDIO_SIGA_SYNC;
282 int cc;
284 DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "siga-s:%1d", q->nr);
285 qperf_inc(q, siga_sync);
287 if (is_qebsm(q)) {
288 schid = q->irq_ptr->sch_token;
289 fc |= QDIO_SIGA_QEBSM_FLAG;
292 cc = do_siga_sync(schid, output, input, fc);
293 if (unlikely(cc))
294 DBF_ERROR("%4x SIGA-S:%2d", SCH_NO(q), cc);
295 return (cc) ? -EIO : 0;
298 static inline int qdio_siga_sync_q(struct qdio_q *q)
300 if (q->is_input_q)
301 return qdio_siga_sync(q, 0, q->mask);
302 else
303 return qdio_siga_sync(q, q->mask, 0);
306 static int qdio_siga_output(struct qdio_q *q, unsigned int *busy_bit,
307 unsigned long aob)
309 unsigned long schid = *((u32 *) &q->irq_ptr->schid);
310 unsigned int fc = QDIO_SIGA_WRITE;
311 u64 start_time = 0;
312 int retries = 0, cc;
313 unsigned long laob = 0;
315 WARN_ON_ONCE(aob && ((queue_type(q) != QDIO_IQDIO_QFMT) ||
316 !q->u.out.use_cq));
317 if (q->u.out.use_cq && aob != 0) {
318 fc = QDIO_SIGA_WRITEQ;
319 laob = aob;
322 if (is_qebsm(q)) {
323 schid = q->irq_ptr->sch_token;
324 fc |= QDIO_SIGA_QEBSM_FLAG;
326 again:
327 cc = do_siga_output(schid, q->mask, busy_bit, fc, laob);
329 /* hipersocket busy condition */
330 if (unlikely(*busy_bit)) {
331 retries++;
333 if (!start_time) {
334 start_time = get_tod_clock_fast();
335 goto again;
337 if (get_tod_clock_fast() - start_time < QDIO_BUSY_BIT_PATIENCE)
338 goto again;
340 if (retries) {
341 DBF_DEV_EVENT(DBF_WARN, q->irq_ptr,
342 "%4x cc2 BB1:%1d", SCH_NO(q), q->nr);
343 DBF_DEV_EVENT(DBF_WARN, q->irq_ptr, "count:%u", retries);
345 return cc;
348 static inline int qdio_siga_input(struct qdio_q *q)
350 unsigned long schid = *((u32 *) &q->irq_ptr->schid);
351 unsigned int fc = QDIO_SIGA_READ;
352 int cc;
354 DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "siga-r:%1d", q->nr);
355 qperf_inc(q, siga_read);
357 if (is_qebsm(q)) {
358 schid = q->irq_ptr->sch_token;
359 fc |= QDIO_SIGA_QEBSM_FLAG;
362 cc = do_siga_input(schid, q->mask, fc);
363 if (unlikely(cc))
364 DBF_ERROR("%4x SIGA-R:%2d", SCH_NO(q), cc);
365 return (cc) ? -EIO : 0;
368 #define qdio_siga_sync_out(q) qdio_siga_sync(q, ~0U, 0)
369 #define qdio_siga_sync_all(q) qdio_siga_sync(q, ~0U, ~0U)
371 static inline void qdio_sync_queues(struct qdio_q *q)
373 /* PCI capable outbound queues will also be scanned so sync them too */
374 if (pci_out_supported(q))
375 qdio_siga_sync_all(q);
376 else
377 qdio_siga_sync_q(q);
380 int debug_get_buf_state(struct qdio_q *q, unsigned int bufnr,
381 unsigned char *state)
383 if (need_siga_sync(q))
384 qdio_siga_sync_q(q);
385 return get_buf_states(q, bufnr, state, 1, 0, 0);
388 static inline void qdio_stop_polling(struct qdio_q *q)
390 if (!q->u.in.polling)
391 return;
393 q->u.in.polling = 0;
394 qperf_inc(q, stop_polling);
396 /* show the card that we are not polling anymore */
397 if (is_qebsm(q)) {
398 set_buf_states(q, q->u.in.ack_start, SLSB_P_INPUT_NOT_INIT,
399 q->u.in.ack_count);
400 q->u.in.ack_count = 0;
401 } else
402 set_buf_state(q, q->u.in.ack_start, SLSB_P_INPUT_NOT_INIT);
405 static inline void account_sbals(struct qdio_q *q, unsigned int count)
407 int pos;
409 q->q_stats.nr_sbal_total += count;
410 if (count == QDIO_MAX_BUFFERS_MASK) {
411 q->q_stats.nr_sbals[7]++;
412 return;
414 pos = ilog2(count);
415 q->q_stats.nr_sbals[pos]++;
418 static void process_buffer_error(struct qdio_q *q, int count)
420 unsigned char state = (q->is_input_q) ? SLSB_P_INPUT_NOT_INIT :
421 SLSB_P_OUTPUT_NOT_INIT;
423 q->qdio_error = QDIO_ERROR_SLSB_STATE;
425 /* special handling for no target buffer empty */
426 if (queue_type(q) == QDIO_IQDIO_QFMT && !q->is_input_q &&
427 q->sbal[q->first_to_check]->element[15].sflags == 0x10) {
428 qperf_inc(q, target_full);
429 DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "OUTFULL FTC:%02x",
430 q->first_to_check);
431 goto set;
434 DBF_ERROR("%4x BUF ERROR", SCH_NO(q));
435 DBF_ERROR((q->is_input_q) ? "IN:%2d" : "OUT:%2d", q->nr);
436 DBF_ERROR("FTC:%3d C:%3d", q->first_to_check, count);
437 DBF_ERROR("F14:%2x F15:%2x",
438 q->sbal[q->first_to_check]->element[14].sflags,
439 q->sbal[q->first_to_check]->element[15].sflags);
441 set:
443 * Interrupts may be avoided as long as the error is present
444 * so change the buffer state immediately to avoid starvation.
446 set_buf_states(q, q->first_to_check, state, count);
449 static inline void inbound_primed(struct qdio_q *q, int count)
451 int new;
453 DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "in prim:%1d %02x", q->nr, count);
455 /* for QEBSM the ACK was already set by EQBS */
456 if (is_qebsm(q)) {
457 if (!q->u.in.polling) {
458 q->u.in.polling = 1;
459 q->u.in.ack_count = count;
460 q->u.in.ack_start = q->first_to_check;
461 return;
464 /* delete the previous ACK's */
465 set_buf_states(q, q->u.in.ack_start, SLSB_P_INPUT_NOT_INIT,
466 q->u.in.ack_count);
467 q->u.in.ack_count = count;
468 q->u.in.ack_start = q->first_to_check;
469 return;
473 * ACK the newest buffer. The ACK will be removed in qdio_stop_polling
474 * or by the next inbound run.
476 new = add_buf(q->first_to_check, count - 1);
477 if (q->u.in.polling) {
478 /* reset the previous ACK but first set the new one */
479 set_buf_state(q, new, SLSB_P_INPUT_ACK);
480 set_buf_state(q, q->u.in.ack_start, SLSB_P_INPUT_NOT_INIT);
481 } else {
482 q->u.in.polling = 1;
483 set_buf_state(q, new, SLSB_P_INPUT_ACK);
486 q->u.in.ack_start = new;
487 count--;
488 if (!count)
489 return;
490 /* need to change ALL buffers to get more interrupts */
491 set_buf_states(q, q->first_to_check, SLSB_P_INPUT_NOT_INIT, count);
494 static int get_inbound_buffer_frontier(struct qdio_q *q)
496 unsigned char state = 0;
497 int count;
499 q->timestamp = get_tod_clock_fast();
502 * Don't check 128 buffers, as otherwise qdio_inbound_q_moved
503 * would return 0.
505 count = min(atomic_read(&q->nr_buf_used), QDIO_MAX_BUFFERS_MASK);
506 if (!count)
507 goto out;
510 * No siga sync here, as a PCI or we after a thin interrupt
511 * already sync'ed the queues.
513 count = get_buf_states(q, q->first_to_check, &state, count, 1, 0);
514 if (!count)
515 goto out;
517 switch (state) {
518 case SLSB_P_INPUT_PRIMED:
519 inbound_primed(q, count);
520 q->first_to_check = add_buf(q->first_to_check, count);
521 if (atomic_sub_return(count, &q->nr_buf_used) == 0)
522 qperf_inc(q, inbound_queue_full);
523 if (q->irq_ptr->perf_stat_enabled)
524 account_sbals(q, count);
525 break;
526 case SLSB_P_INPUT_ERROR:
527 process_buffer_error(q, count);
528 q->first_to_check = add_buf(q->first_to_check, count);
529 if (atomic_sub_return(count, &q->nr_buf_used) == 0)
530 qperf_inc(q, inbound_queue_full);
531 if (q->irq_ptr->perf_stat_enabled)
532 account_sbals_error(q, count);
533 break;
534 case SLSB_CU_INPUT_EMPTY:
535 case SLSB_P_INPUT_NOT_INIT:
536 case SLSB_P_INPUT_ACK:
537 if (q->irq_ptr->perf_stat_enabled)
538 q->q_stats.nr_sbal_nop++;
539 DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "in nop:%1d %#02x",
540 q->nr, q->first_to_check);
541 break;
542 default:
543 WARN_ON_ONCE(1);
545 out:
546 return q->first_to_check;
549 static int qdio_inbound_q_moved(struct qdio_q *q)
551 int bufnr;
553 bufnr = get_inbound_buffer_frontier(q);
555 if (bufnr != q->last_move) {
556 q->last_move = bufnr;
557 if (!is_thinint_irq(q->irq_ptr) && MACHINE_IS_LPAR)
558 q->u.in.timestamp = get_tod_clock();
559 return 1;
560 } else
561 return 0;
564 static inline int qdio_inbound_q_done(struct qdio_q *q)
566 unsigned char state = 0;
568 if (!atomic_read(&q->nr_buf_used))
569 return 1;
571 if (need_siga_sync(q))
572 qdio_siga_sync_q(q);
573 get_buf_state(q, q->first_to_check, &state, 0);
575 if (state == SLSB_P_INPUT_PRIMED || state == SLSB_P_INPUT_ERROR)
576 /* more work coming */
577 return 0;
579 if (is_thinint_irq(q->irq_ptr))
580 return 1;
582 /* don't poll under z/VM */
583 if (MACHINE_IS_VM)
584 return 1;
587 * At this point we know, that inbound first_to_check
588 * has (probably) not moved (see qdio_inbound_processing).
590 if (get_tod_clock_fast() > q->u.in.timestamp + QDIO_INPUT_THRESHOLD) {
591 DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "in done:%02x",
592 q->first_to_check);
593 return 1;
594 } else
595 return 0;
598 static inline int contains_aobs(struct qdio_q *q)
600 return !q->is_input_q && q->u.out.use_cq;
603 static inline void qdio_handle_aobs(struct qdio_q *q, int start, int count)
605 unsigned char state = 0;
606 int j, b = start;
608 if (!contains_aobs(q))
609 return;
611 for (j = 0; j < count; ++j) {
612 get_buf_state(q, b, &state, 0);
613 if (state == SLSB_P_OUTPUT_PENDING) {
614 struct qaob *aob = q->u.out.aobs[b];
615 if (aob == NULL)
616 continue;
618 q->u.out.sbal_state[b].flags |=
619 QDIO_OUTBUF_STATE_FLAG_PENDING;
620 q->u.out.aobs[b] = NULL;
621 } else if (state == SLSB_P_OUTPUT_EMPTY) {
622 q->u.out.sbal_state[b].aob = NULL;
624 b = next_buf(b);
628 static inline unsigned long qdio_aob_for_buffer(struct qdio_output_q *q,
629 int bufnr)
631 unsigned long phys_aob = 0;
633 if (!q->use_cq)
634 return 0;
636 if (!q->aobs[bufnr]) {
637 struct qaob *aob = qdio_allocate_aob();
638 q->aobs[bufnr] = aob;
640 if (q->aobs[bufnr]) {
641 q->sbal_state[bufnr].aob = q->aobs[bufnr];
642 q->aobs[bufnr]->user1 = (u64) q->sbal_state[bufnr].user;
643 phys_aob = virt_to_phys(q->aobs[bufnr]);
644 WARN_ON_ONCE(phys_aob & 0xFF);
647 q->sbal_state[bufnr].flags = 0;
648 return phys_aob;
651 static void qdio_kick_handler(struct qdio_q *q)
653 int start = q->first_to_kick;
654 int end = q->first_to_check;
655 int count;
657 if (unlikely(q->irq_ptr->state != QDIO_IRQ_STATE_ACTIVE))
658 return;
660 count = sub_buf(end, start);
662 if (q->is_input_q) {
663 qperf_inc(q, inbound_handler);
664 DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "kih s:%02x c:%02x", start, count);
665 } else {
666 qperf_inc(q, outbound_handler);
667 DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "koh: s:%02x c:%02x",
668 start, count);
671 qdio_handle_aobs(q, start, count);
673 q->handler(q->irq_ptr->cdev, q->qdio_error, q->nr, start, count,
674 q->irq_ptr->int_parm);
676 /* for the next time */
677 q->first_to_kick = end;
678 q->qdio_error = 0;
681 static inline int qdio_tasklet_schedule(struct qdio_q *q)
683 if (likely(q->irq_ptr->state == QDIO_IRQ_STATE_ACTIVE)) {
684 tasklet_schedule(&q->tasklet);
685 return 0;
687 return -EPERM;
690 static void __qdio_inbound_processing(struct qdio_q *q)
692 qperf_inc(q, tasklet_inbound);
694 if (!qdio_inbound_q_moved(q))
695 return;
697 qdio_kick_handler(q);
699 if (!qdio_inbound_q_done(q)) {
700 /* means poll time is not yet over */
701 qperf_inc(q, tasklet_inbound_resched);
702 if (!qdio_tasklet_schedule(q))
703 return;
706 qdio_stop_polling(q);
708 * We need to check again to not lose initiative after
709 * resetting the ACK state.
711 if (!qdio_inbound_q_done(q)) {
712 qperf_inc(q, tasklet_inbound_resched2);
713 qdio_tasklet_schedule(q);
717 void qdio_inbound_processing(unsigned long data)
719 struct qdio_q *q = (struct qdio_q *)data;
720 __qdio_inbound_processing(q);
723 static int get_outbound_buffer_frontier(struct qdio_q *q)
725 unsigned char state = 0;
726 int count;
728 q->timestamp = get_tod_clock_fast();
730 if (need_siga_sync(q))
731 if (((queue_type(q) != QDIO_IQDIO_QFMT) &&
732 !pci_out_supported(q)) ||
733 (queue_type(q) == QDIO_IQDIO_QFMT &&
734 multicast_outbound(q)))
735 qdio_siga_sync_q(q);
738 * Don't check 128 buffers, as otherwise qdio_inbound_q_moved
739 * would return 0.
741 count = min(atomic_read(&q->nr_buf_used), QDIO_MAX_BUFFERS_MASK);
742 if (!count)
743 goto out;
745 count = get_buf_states(q, q->first_to_check, &state, count, 0,
746 q->u.out.use_cq);
747 if (!count)
748 goto out;
750 switch (state) {
751 case SLSB_P_OUTPUT_EMPTY:
752 case SLSB_P_OUTPUT_PENDING:
753 /* the adapter got it */
754 DBF_DEV_EVENT(DBF_INFO, q->irq_ptr,
755 "out empty:%1d %02x", q->nr, count);
757 atomic_sub(count, &q->nr_buf_used);
758 q->first_to_check = add_buf(q->first_to_check, count);
759 if (q->irq_ptr->perf_stat_enabled)
760 account_sbals(q, count);
762 break;
763 case SLSB_P_OUTPUT_ERROR:
764 process_buffer_error(q, count);
765 q->first_to_check = add_buf(q->first_to_check, count);
766 atomic_sub(count, &q->nr_buf_used);
767 if (q->irq_ptr->perf_stat_enabled)
768 account_sbals_error(q, count);
769 break;
770 case SLSB_CU_OUTPUT_PRIMED:
771 /* the adapter has not fetched the output yet */
772 if (q->irq_ptr->perf_stat_enabled)
773 q->q_stats.nr_sbal_nop++;
774 DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "out primed:%1d",
775 q->nr);
776 break;
777 case SLSB_P_OUTPUT_NOT_INIT:
778 case SLSB_P_OUTPUT_HALTED:
779 break;
780 default:
781 WARN_ON_ONCE(1);
784 out:
785 return q->first_to_check;
788 /* all buffers processed? */
789 static inline int qdio_outbound_q_done(struct qdio_q *q)
791 return atomic_read(&q->nr_buf_used) == 0;
794 static inline int qdio_outbound_q_moved(struct qdio_q *q)
796 int bufnr;
798 bufnr = get_outbound_buffer_frontier(q);
800 if (bufnr != q->last_move) {
801 q->last_move = bufnr;
802 DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "out moved:%1d", q->nr);
803 return 1;
804 } else
805 return 0;
808 static int qdio_kick_outbound_q(struct qdio_q *q, unsigned long aob)
810 int retries = 0, cc;
811 unsigned int busy_bit;
813 if (!need_siga_out(q))
814 return 0;
816 DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "siga-w:%1d", q->nr);
817 retry:
818 qperf_inc(q, siga_write);
820 cc = qdio_siga_output(q, &busy_bit, aob);
821 switch (cc) {
822 case 0:
823 break;
824 case 2:
825 if (busy_bit) {
826 while (++retries < QDIO_BUSY_BIT_RETRIES) {
827 mdelay(QDIO_BUSY_BIT_RETRY_DELAY);
828 goto retry;
830 DBF_ERROR("%4x cc2 BBC:%1d", SCH_NO(q), q->nr);
831 cc = -EBUSY;
832 } else {
833 DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "siga-w cc2:%1d", q->nr);
834 cc = -ENOBUFS;
836 break;
837 case 1:
838 case 3:
839 DBF_ERROR("%4x SIGA-W:%1d", SCH_NO(q), cc);
840 cc = -EIO;
841 break;
843 if (retries) {
844 DBF_ERROR("%4x cc2 BB2:%1d", SCH_NO(q), q->nr);
845 DBF_ERROR("count:%u", retries);
847 return cc;
850 static void __qdio_outbound_processing(struct qdio_q *q)
852 qperf_inc(q, tasklet_outbound);
853 WARN_ON_ONCE(atomic_read(&q->nr_buf_used) < 0);
855 if (qdio_outbound_q_moved(q))
856 qdio_kick_handler(q);
858 if (queue_type(q) == QDIO_ZFCP_QFMT)
859 if (!pci_out_supported(q) && !qdio_outbound_q_done(q))
860 goto sched;
862 if (q->u.out.pci_out_enabled)
863 return;
866 * Now we know that queue type is either qeth without pci enabled
867 * or HiperSockets. Make sure buffer switch from PRIMED to EMPTY
868 * is noticed and outbound_handler is called after some time.
870 if (qdio_outbound_q_done(q))
871 del_timer_sync(&q->u.out.timer);
872 else
873 if (!timer_pending(&q->u.out.timer) &&
874 likely(q->irq_ptr->state == QDIO_IRQ_STATE_ACTIVE))
875 mod_timer(&q->u.out.timer, jiffies + 10 * HZ);
876 return;
878 sched:
879 qdio_tasklet_schedule(q);
882 /* outbound tasklet */
883 void qdio_outbound_processing(unsigned long data)
885 struct qdio_q *q = (struct qdio_q *)data;
886 __qdio_outbound_processing(q);
889 void qdio_outbound_timer(struct timer_list *t)
891 struct qdio_q *q = from_timer(q, t, u.out.timer);
893 qdio_tasklet_schedule(q);
896 static inline void qdio_check_outbound_after_thinint(struct qdio_q *q)
898 struct qdio_q *out;
899 int i;
901 if (!pci_out_supported(q))
902 return;
904 for_each_output_queue(q->irq_ptr, out, i)
905 if (!qdio_outbound_q_done(out))
906 qdio_tasklet_schedule(out);
909 static void __tiqdio_inbound_processing(struct qdio_q *q)
911 qperf_inc(q, tasklet_inbound);
912 if (need_siga_sync(q) && need_siga_sync_after_ai(q))
913 qdio_sync_queues(q);
916 * The interrupt could be caused by a PCI request. Check the
917 * PCI capable outbound queues.
919 qdio_check_outbound_after_thinint(q);
921 if (!qdio_inbound_q_moved(q))
922 return;
924 qdio_kick_handler(q);
926 if (!qdio_inbound_q_done(q)) {
927 qperf_inc(q, tasklet_inbound_resched);
928 if (!qdio_tasklet_schedule(q))
929 return;
932 qdio_stop_polling(q);
934 * We need to check again to not lose initiative after
935 * resetting the ACK state.
937 if (!qdio_inbound_q_done(q)) {
938 qperf_inc(q, tasklet_inbound_resched2);
939 qdio_tasklet_schedule(q);
943 void tiqdio_inbound_processing(unsigned long data)
945 struct qdio_q *q = (struct qdio_q *)data;
946 __tiqdio_inbound_processing(q);
949 static inline void qdio_set_state(struct qdio_irq *irq_ptr,
950 enum qdio_irq_states state)
952 DBF_DEV_EVENT(DBF_INFO, irq_ptr, "newstate: %1d", state);
954 irq_ptr->state = state;
955 mb();
958 static void qdio_irq_check_sense(struct qdio_irq *irq_ptr, struct irb *irb)
960 if (irb->esw.esw0.erw.cons) {
961 DBF_ERROR("%4x sense:", irq_ptr->schid.sch_no);
962 DBF_ERROR_HEX(irb, 64);
963 DBF_ERROR_HEX(irb->ecw, 64);
967 /* PCI interrupt handler */
968 static void qdio_int_handler_pci(struct qdio_irq *irq_ptr)
970 int i;
971 struct qdio_q *q;
973 if (unlikely(irq_ptr->state != QDIO_IRQ_STATE_ACTIVE))
974 return;
976 for_each_input_queue(irq_ptr, q, i) {
977 if (q->u.in.queue_start_poll) {
978 /* skip if polling is enabled or already in work */
979 if (test_and_set_bit(QDIO_QUEUE_IRQS_DISABLED,
980 &q->u.in.queue_irq_state)) {
981 qperf_inc(q, int_discarded);
982 continue;
984 q->u.in.queue_start_poll(q->irq_ptr->cdev, q->nr,
985 q->irq_ptr->int_parm);
986 } else {
987 tasklet_schedule(&q->tasklet);
991 if (!(irq_ptr->qib.ac & QIB_AC_OUTBOUND_PCI_SUPPORTED))
992 return;
994 for_each_output_queue(irq_ptr, q, i) {
995 if (qdio_outbound_q_done(q))
996 continue;
997 if (need_siga_sync(q) && need_siga_sync_out_after_pci(q))
998 qdio_siga_sync_q(q);
999 qdio_tasklet_schedule(q);
1003 static void qdio_handle_activate_check(struct ccw_device *cdev,
1004 unsigned long intparm, int cstat, int dstat)
1006 struct qdio_irq *irq_ptr = cdev->private->qdio_data;
1007 struct qdio_q *q;
1008 int count;
1010 DBF_ERROR("%4x ACT CHECK", irq_ptr->schid.sch_no);
1011 DBF_ERROR("intp :%lx", intparm);
1012 DBF_ERROR("ds: %2x cs:%2x", dstat, cstat);
1014 if (irq_ptr->nr_input_qs) {
1015 q = irq_ptr->input_qs[0];
1016 } else if (irq_ptr->nr_output_qs) {
1017 q = irq_ptr->output_qs[0];
1018 } else {
1019 dump_stack();
1020 goto no_handler;
1023 count = sub_buf(q->first_to_check, q->first_to_kick);
1024 q->handler(q->irq_ptr->cdev, QDIO_ERROR_ACTIVATE,
1025 q->nr, q->first_to_kick, count, irq_ptr->int_parm);
1026 no_handler:
1027 qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED);
1029 * In case of z/VM LGR (Live Guest Migration) QDIO recovery will happen.
1030 * Therefore we call the LGR detection function here.
1032 lgr_info_log();
1035 static void qdio_establish_handle_irq(struct ccw_device *cdev, int cstat,
1036 int dstat)
1038 struct qdio_irq *irq_ptr = cdev->private->qdio_data;
1040 DBF_DEV_EVENT(DBF_INFO, irq_ptr, "qest irq");
1042 if (cstat)
1043 goto error;
1044 if (dstat & ~(DEV_STAT_DEV_END | DEV_STAT_CHN_END))
1045 goto error;
1046 if (!(dstat & DEV_STAT_DEV_END))
1047 goto error;
1048 qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ESTABLISHED);
1049 return;
1051 error:
1052 DBF_ERROR("%4x EQ:error", irq_ptr->schid.sch_no);
1053 DBF_ERROR("ds: %2x cs:%2x", dstat, cstat);
1054 qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR);
1057 /* qdio interrupt handler */
1058 void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm,
1059 struct irb *irb)
1061 struct qdio_irq *irq_ptr = cdev->private->qdio_data;
1062 struct subchannel_id schid;
1063 int cstat, dstat;
1065 if (!intparm || !irq_ptr) {
1066 ccw_device_get_schid(cdev, &schid);
1067 DBF_ERROR("qint:%4x", schid.sch_no);
1068 return;
1071 if (irq_ptr->perf_stat_enabled)
1072 irq_ptr->perf_stat.qdio_int++;
1074 if (IS_ERR(irb)) {
1075 DBF_ERROR("%4x IO error", irq_ptr->schid.sch_no);
1076 qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR);
1077 wake_up(&cdev->private->wait_q);
1078 return;
1080 qdio_irq_check_sense(irq_ptr, irb);
1081 cstat = irb->scsw.cmd.cstat;
1082 dstat = irb->scsw.cmd.dstat;
1084 switch (irq_ptr->state) {
1085 case QDIO_IRQ_STATE_INACTIVE:
1086 qdio_establish_handle_irq(cdev, cstat, dstat);
1087 break;
1088 case QDIO_IRQ_STATE_CLEANUP:
1089 qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE);
1090 break;
1091 case QDIO_IRQ_STATE_ESTABLISHED:
1092 case QDIO_IRQ_STATE_ACTIVE:
1093 if (cstat & SCHN_STAT_PCI) {
1094 qdio_int_handler_pci(irq_ptr);
1095 return;
1097 if (cstat || dstat)
1098 qdio_handle_activate_check(cdev, intparm, cstat,
1099 dstat);
1100 break;
1101 case QDIO_IRQ_STATE_STOPPED:
1102 break;
1103 default:
1104 WARN_ON_ONCE(1);
1106 wake_up(&cdev->private->wait_q);
1110 * qdio_get_ssqd_desc - get qdio subchannel description
1111 * @cdev: ccw device to get description for
1112 * @data: where to store the ssqd
1114 * Returns 0 or an error code. The results of the chsc are stored in the
1115 * specified structure.
1117 int qdio_get_ssqd_desc(struct ccw_device *cdev,
1118 struct qdio_ssqd_desc *data)
1120 struct subchannel_id schid;
1122 if (!cdev || !cdev->private)
1123 return -EINVAL;
1125 ccw_device_get_schid(cdev, &schid);
1126 DBF_EVENT("get ssqd:%4x", schid.sch_no);
1127 return qdio_setup_get_ssqd(NULL, &schid, data);
1129 EXPORT_SYMBOL_GPL(qdio_get_ssqd_desc);
1131 static void qdio_shutdown_queues(struct ccw_device *cdev)
1133 struct qdio_irq *irq_ptr = cdev->private->qdio_data;
1134 struct qdio_q *q;
1135 int i;
1137 for_each_input_queue(irq_ptr, q, i)
1138 tasklet_kill(&q->tasklet);
1140 for_each_output_queue(irq_ptr, q, i) {
1141 del_timer_sync(&q->u.out.timer);
1142 tasklet_kill(&q->tasklet);
1147 * qdio_shutdown - shut down a qdio subchannel
1148 * @cdev: associated ccw device
1149 * @how: use halt or clear to shutdown
1151 int qdio_shutdown(struct ccw_device *cdev, int how)
1153 struct qdio_irq *irq_ptr = cdev->private->qdio_data;
1154 struct subchannel_id schid;
1155 int rc;
1157 if (!irq_ptr)
1158 return -ENODEV;
1160 WARN_ON_ONCE(irqs_disabled());
1161 ccw_device_get_schid(cdev, &schid);
1162 DBF_EVENT("qshutdown:%4x", schid.sch_no);
1164 mutex_lock(&irq_ptr->setup_mutex);
1166 * Subchannel was already shot down. We cannot prevent being called
1167 * twice since cio may trigger a shutdown asynchronously.
1169 if (irq_ptr->state == QDIO_IRQ_STATE_INACTIVE) {
1170 mutex_unlock(&irq_ptr->setup_mutex);
1171 return 0;
1175 * Indicate that the device is going down. Scheduling the queue
1176 * tasklets is forbidden from here on.
1178 qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED);
1180 tiqdio_remove_input_queues(irq_ptr);
1181 qdio_shutdown_queues(cdev);
1182 qdio_shutdown_debug_entries(irq_ptr);
1184 /* cleanup subchannel */
1185 spin_lock_irq(get_ccwdev_lock(cdev));
1187 if (how & QDIO_FLAG_CLEANUP_USING_CLEAR)
1188 rc = ccw_device_clear(cdev, QDIO_DOING_CLEANUP);
1189 else
1190 /* default behaviour is halt */
1191 rc = ccw_device_halt(cdev, QDIO_DOING_CLEANUP);
1192 if (rc) {
1193 DBF_ERROR("%4x SHUTD ERR", irq_ptr->schid.sch_no);
1194 DBF_ERROR("rc:%4d", rc);
1195 goto no_cleanup;
1198 qdio_set_state(irq_ptr, QDIO_IRQ_STATE_CLEANUP);
1199 spin_unlock_irq(get_ccwdev_lock(cdev));
1200 wait_event_interruptible_timeout(cdev->private->wait_q,
1201 irq_ptr->state == QDIO_IRQ_STATE_INACTIVE ||
1202 irq_ptr->state == QDIO_IRQ_STATE_ERR,
1203 10 * HZ);
1204 spin_lock_irq(get_ccwdev_lock(cdev));
1206 no_cleanup:
1207 qdio_shutdown_thinint(irq_ptr);
1209 /* restore interrupt handler */
1210 if ((void *)cdev->handler == (void *)qdio_int_handler) {
1211 cdev->handler = irq_ptr->orig_handler;
1212 cdev->private->intparm = 0;
1214 spin_unlock_irq(get_ccwdev_lock(cdev));
1216 qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE);
1217 mutex_unlock(&irq_ptr->setup_mutex);
1218 if (rc)
1219 return rc;
1220 return 0;
1222 EXPORT_SYMBOL_GPL(qdio_shutdown);
1225 * qdio_free - free data structures for a qdio subchannel
1226 * @cdev: associated ccw device
1228 int qdio_free(struct ccw_device *cdev)
1230 struct qdio_irq *irq_ptr = cdev->private->qdio_data;
1231 struct subchannel_id schid;
1233 if (!irq_ptr)
1234 return -ENODEV;
1236 ccw_device_get_schid(cdev, &schid);
1237 DBF_EVENT("qfree:%4x", schid.sch_no);
1238 DBF_DEV_EVENT(DBF_ERR, irq_ptr, "dbf abandoned");
1239 mutex_lock(&irq_ptr->setup_mutex);
1241 irq_ptr->debug_area = NULL;
1242 cdev->private->qdio_data = NULL;
1243 mutex_unlock(&irq_ptr->setup_mutex);
1245 qdio_release_memory(irq_ptr);
1246 return 0;
1248 EXPORT_SYMBOL_GPL(qdio_free);
1251 * qdio_allocate - allocate qdio queues and associated data
1252 * @init_data: initialization data
1254 int qdio_allocate(struct qdio_initialize *init_data)
1256 struct subchannel_id schid;
1257 struct qdio_irq *irq_ptr;
1259 ccw_device_get_schid(init_data->cdev, &schid);
1260 DBF_EVENT("qallocate:%4x", schid.sch_no);
1262 if ((init_data->no_input_qs && !init_data->input_handler) ||
1263 (init_data->no_output_qs && !init_data->output_handler))
1264 return -EINVAL;
1266 if ((init_data->no_input_qs > QDIO_MAX_QUEUES_PER_IRQ) ||
1267 (init_data->no_output_qs > QDIO_MAX_QUEUES_PER_IRQ))
1268 return -EINVAL;
1270 if ((!init_data->input_sbal_addr_array) ||
1271 (!init_data->output_sbal_addr_array))
1272 return -EINVAL;
1274 /* irq_ptr must be in GFP_DMA since it contains ccw1.cda */
1275 irq_ptr = (void *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
1276 if (!irq_ptr)
1277 goto out_err;
1279 mutex_init(&irq_ptr->setup_mutex);
1280 if (qdio_allocate_dbf(init_data, irq_ptr))
1281 goto out_rel;
1284 * Allocate a page for the chsc calls in qdio_establish.
1285 * Must be pre-allocated since a zfcp recovery will call
1286 * qdio_establish. In case of low memory and swap on a zfcp disk
1287 * we may not be able to allocate memory otherwise.
1289 irq_ptr->chsc_page = get_zeroed_page(GFP_KERNEL);
1290 if (!irq_ptr->chsc_page)
1291 goto out_rel;
1293 /* qdr is used in ccw1.cda which is u32 */
1294 irq_ptr->qdr = (struct qdr *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
1295 if (!irq_ptr->qdr)
1296 goto out_rel;
1298 if (qdio_allocate_qs(irq_ptr, init_data->no_input_qs,
1299 init_data->no_output_qs))
1300 goto out_rel;
1302 init_data->cdev->private->qdio_data = irq_ptr;
1303 qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE);
1304 return 0;
1305 out_rel:
1306 qdio_release_memory(irq_ptr);
1307 out_err:
1308 return -ENOMEM;
1310 EXPORT_SYMBOL_GPL(qdio_allocate);
1312 static void qdio_detect_hsicq(struct qdio_irq *irq_ptr)
1314 struct qdio_q *q = irq_ptr->input_qs[0];
1315 int i, use_cq = 0;
1317 if (irq_ptr->nr_input_qs > 1 && queue_type(q) == QDIO_IQDIO_QFMT)
1318 use_cq = 1;
1320 for_each_output_queue(irq_ptr, q, i) {
1321 if (use_cq) {
1322 if (qdio_enable_async_operation(&q->u.out) < 0) {
1323 use_cq = 0;
1324 continue;
1326 } else
1327 qdio_disable_async_operation(&q->u.out);
1329 DBF_EVENT("use_cq:%d", use_cq);
1333 * qdio_establish - establish queues on a qdio subchannel
1334 * @init_data: initialization data
1336 int qdio_establish(struct qdio_initialize *init_data)
1338 struct ccw_device *cdev = init_data->cdev;
1339 struct subchannel_id schid;
1340 struct qdio_irq *irq_ptr;
1341 int rc;
1343 ccw_device_get_schid(cdev, &schid);
1344 DBF_EVENT("qestablish:%4x", schid.sch_no);
1346 irq_ptr = cdev->private->qdio_data;
1347 if (!irq_ptr)
1348 return -ENODEV;
1350 mutex_lock(&irq_ptr->setup_mutex);
1351 qdio_setup_irq(init_data);
1353 rc = qdio_establish_thinint(irq_ptr);
1354 if (rc) {
1355 mutex_unlock(&irq_ptr->setup_mutex);
1356 qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR);
1357 return rc;
1360 /* establish q */
1361 irq_ptr->ccw.cmd_code = irq_ptr->equeue.cmd;
1362 irq_ptr->ccw.flags = CCW_FLAG_SLI;
1363 irq_ptr->ccw.count = irq_ptr->equeue.count;
1364 irq_ptr->ccw.cda = (u32)((addr_t)irq_ptr->qdr);
1366 spin_lock_irq(get_ccwdev_lock(cdev));
1367 ccw_device_set_options_mask(cdev, 0);
1369 rc = ccw_device_start(cdev, &irq_ptr->ccw, QDIO_DOING_ESTABLISH, 0, 0);
1370 spin_unlock_irq(get_ccwdev_lock(cdev));
1371 if (rc) {
1372 DBF_ERROR("%4x est IO ERR", irq_ptr->schid.sch_no);
1373 DBF_ERROR("rc:%4x", rc);
1374 mutex_unlock(&irq_ptr->setup_mutex);
1375 qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR);
1376 return rc;
1379 wait_event_interruptible_timeout(cdev->private->wait_q,
1380 irq_ptr->state == QDIO_IRQ_STATE_ESTABLISHED ||
1381 irq_ptr->state == QDIO_IRQ_STATE_ERR, HZ);
1383 if (irq_ptr->state != QDIO_IRQ_STATE_ESTABLISHED) {
1384 mutex_unlock(&irq_ptr->setup_mutex);
1385 qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR);
1386 return -EIO;
1389 qdio_setup_ssqd_info(irq_ptr);
1391 qdio_detect_hsicq(irq_ptr);
1393 /* qebsm is now setup if available, initialize buffer states */
1394 qdio_init_buf_states(irq_ptr);
1396 mutex_unlock(&irq_ptr->setup_mutex);
1397 qdio_print_subchannel_info(irq_ptr, cdev);
1398 qdio_setup_debug_entries(irq_ptr, cdev);
1399 return 0;
1401 EXPORT_SYMBOL_GPL(qdio_establish);
1404 * qdio_activate - activate queues on a qdio subchannel
1405 * @cdev: associated cdev
1407 int qdio_activate(struct ccw_device *cdev)
1409 struct subchannel_id schid;
1410 struct qdio_irq *irq_ptr;
1411 int rc;
1413 ccw_device_get_schid(cdev, &schid);
1414 DBF_EVENT("qactivate:%4x", schid.sch_no);
1416 irq_ptr = cdev->private->qdio_data;
1417 if (!irq_ptr)
1418 return -ENODEV;
1420 mutex_lock(&irq_ptr->setup_mutex);
1421 if (irq_ptr->state == QDIO_IRQ_STATE_INACTIVE) {
1422 rc = -EBUSY;
1423 goto out;
1426 irq_ptr->ccw.cmd_code = irq_ptr->aqueue.cmd;
1427 irq_ptr->ccw.flags = CCW_FLAG_SLI;
1428 irq_ptr->ccw.count = irq_ptr->aqueue.count;
1429 irq_ptr->ccw.cda = 0;
1431 spin_lock_irq(get_ccwdev_lock(cdev));
1432 ccw_device_set_options(cdev, CCWDEV_REPORT_ALL);
1434 rc = ccw_device_start(cdev, &irq_ptr->ccw, QDIO_DOING_ACTIVATE,
1435 0, DOIO_DENY_PREFETCH);
1436 spin_unlock_irq(get_ccwdev_lock(cdev));
1437 if (rc) {
1438 DBF_ERROR("%4x act IO ERR", irq_ptr->schid.sch_no);
1439 DBF_ERROR("rc:%4x", rc);
1440 goto out;
1443 if (is_thinint_irq(irq_ptr))
1444 tiqdio_add_input_queues(irq_ptr);
1446 /* wait for subchannel to become active */
1447 msleep(5);
1449 switch (irq_ptr->state) {
1450 case QDIO_IRQ_STATE_STOPPED:
1451 case QDIO_IRQ_STATE_ERR:
1452 rc = -EIO;
1453 break;
1454 default:
1455 qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ACTIVE);
1456 rc = 0;
1458 out:
1459 mutex_unlock(&irq_ptr->setup_mutex);
1460 return rc;
1462 EXPORT_SYMBOL_GPL(qdio_activate);
1464 static inline int buf_in_between(int bufnr, int start, int count)
1466 int end = add_buf(start, count);
1468 if (end > start) {
1469 if (bufnr >= start && bufnr < end)
1470 return 1;
1471 else
1472 return 0;
1475 /* wrap-around case */
1476 if ((bufnr >= start && bufnr <= QDIO_MAX_BUFFERS_PER_Q) ||
1477 (bufnr < end))
1478 return 1;
1479 else
1480 return 0;
1484 * handle_inbound - reset processed input buffers
1485 * @q: queue containing the buffers
1486 * @callflags: flags
1487 * @bufnr: first buffer to process
1488 * @count: how many buffers are emptied
1490 static int handle_inbound(struct qdio_q *q, unsigned int callflags,
1491 int bufnr, int count)
1493 int diff;
1495 qperf_inc(q, inbound_call);
1497 if (!q->u.in.polling)
1498 goto set;
1500 /* protect against stop polling setting an ACK for an emptied slsb */
1501 if (count == QDIO_MAX_BUFFERS_PER_Q) {
1502 /* overwriting everything, just delete polling status */
1503 q->u.in.polling = 0;
1504 q->u.in.ack_count = 0;
1505 goto set;
1506 } else if (buf_in_between(q->u.in.ack_start, bufnr, count)) {
1507 if (is_qebsm(q)) {
1508 /* partial overwrite, just update ack_start */
1509 diff = add_buf(bufnr, count);
1510 diff = sub_buf(diff, q->u.in.ack_start);
1511 q->u.in.ack_count -= diff;
1512 if (q->u.in.ack_count <= 0) {
1513 q->u.in.polling = 0;
1514 q->u.in.ack_count = 0;
1515 goto set;
1517 q->u.in.ack_start = add_buf(q->u.in.ack_start, diff);
1519 else
1520 /* the only ACK will be deleted, so stop polling */
1521 q->u.in.polling = 0;
1524 set:
1525 count = set_buf_states(q, bufnr, SLSB_CU_INPUT_EMPTY, count);
1526 atomic_add(count, &q->nr_buf_used);
1528 if (need_siga_in(q))
1529 return qdio_siga_input(q);
1531 return 0;
1535 * handle_outbound - process filled outbound buffers
1536 * @q: queue containing the buffers
1537 * @callflags: flags
1538 * @bufnr: first buffer to process
1539 * @count: how many buffers are filled
1541 static int handle_outbound(struct qdio_q *q, unsigned int callflags,
1542 int bufnr, int count)
1544 unsigned char state = 0;
1545 int used, rc = 0;
1547 qperf_inc(q, outbound_call);
1549 count = set_buf_states(q, bufnr, SLSB_CU_OUTPUT_PRIMED, count);
1550 used = atomic_add_return(count, &q->nr_buf_used);
1552 if (used == QDIO_MAX_BUFFERS_PER_Q)
1553 qperf_inc(q, outbound_queue_full);
1555 if (callflags & QDIO_FLAG_PCI_OUT) {
1556 q->u.out.pci_out_enabled = 1;
1557 qperf_inc(q, pci_request_int);
1558 } else
1559 q->u.out.pci_out_enabled = 0;
1561 if (queue_type(q) == QDIO_IQDIO_QFMT) {
1562 unsigned long phys_aob = 0;
1564 /* One SIGA-W per buffer required for unicast HSI */
1565 WARN_ON_ONCE(count > 1 && !multicast_outbound(q));
1567 phys_aob = qdio_aob_for_buffer(&q->u.out, bufnr);
1569 rc = qdio_kick_outbound_q(q, phys_aob);
1570 } else if (need_siga_sync(q)) {
1571 rc = qdio_siga_sync_q(q);
1572 } else if (count < QDIO_MAX_BUFFERS_PER_Q &&
1573 get_buf_state(q, prev_buf(bufnr), &state, 0) > 0 &&
1574 state == SLSB_CU_OUTPUT_PRIMED) {
1575 /* The previous buffer is not processed yet, tack on. */
1576 qperf_inc(q, fast_requeue);
1577 } else {
1578 rc = qdio_kick_outbound_q(q, 0);
1581 /* in case of SIGA errors we must process the error immediately */
1582 if (used >= q->u.out.scan_threshold || rc)
1583 qdio_tasklet_schedule(q);
1584 else
1585 /* free the SBALs in case of no further traffic */
1586 if (!timer_pending(&q->u.out.timer) &&
1587 likely(q->irq_ptr->state == QDIO_IRQ_STATE_ACTIVE))
1588 mod_timer(&q->u.out.timer, jiffies + HZ);
1589 return rc;
1593 * do_QDIO - process input or output buffers
1594 * @cdev: associated ccw_device for the qdio subchannel
1595 * @callflags: input or output and special flags from the program
1596 * @q_nr: queue number
1597 * @bufnr: buffer number
1598 * @count: how many buffers to process
1600 int do_QDIO(struct ccw_device *cdev, unsigned int callflags,
1601 int q_nr, unsigned int bufnr, unsigned int count)
1603 struct qdio_irq *irq_ptr;
1605 if (bufnr >= QDIO_MAX_BUFFERS_PER_Q || count > QDIO_MAX_BUFFERS_PER_Q)
1606 return -EINVAL;
1608 irq_ptr = cdev->private->qdio_data;
1609 if (!irq_ptr)
1610 return -ENODEV;
1612 DBF_DEV_EVENT(DBF_INFO, irq_ptr,
1613 "do%02x b:%02x c:%02x", callflags, bufnr, count);
1615 if (irq_ptr->state != QDIO_IRQ_STATE_ACTIVE)
1616 return -EIO;
1617 if (!count)
1618 return 0;
1619 if (callflags & QDIO_FLAG_SYNC_INPUT)
1620 return handle_inbound(irq_ptr->input_qs[q_nr],
1621 callflags, bufnr, count);
1622 else if (callflags & QDIO_FLAG_SYNC_OUTPUT)
1623 return handle_outbound(irq_ptr->output_qs[q_nr],
1624 callflags, bufnr, count);
1625 return -EINVAL;
1627 EXPORT_SYMBOL_GPL(do_QDIO);
1630 * qdio_start_irq - process input buffers
1631 * @cdev: associated ccw_device for the qdio subchannel
1632 * @nr: input queue number
1634 * Return codes
1635 * 0 - success
1636 * 1 - irqs not started since new data is available
1638 int qdio_start_irq(struct ccw_device *cdev, int nr)
1640 struct qdio_q *q;
1641 struct qdio_irq *irq_ptr = cdev->private->qdio_data;
1643 if (!irq_ptr)
1644 return -ENODEV;
1645 q = irq_ptr->input_qs[nr];
1647 clear_nonshared_ind(irq_ptr);
1648 qdio_stop_polling(q);
1649 clear_bit(QDIO_QUEUE_IRQS_DISABLED, &q->u.in.queue_irq_state);
1652 * We need to check again to not lose initiative after
1653 * resetting the ACK state.
1655 if (test_nonshared_ind(irq_ptr))
1656 goto rescan;
1657 if (!qdio_inbound_q_done(q))
1658 goto rescan;
1659 return 0;
1661 rescan:
1662 if (test_and_set_bit(QDIO_QUEUE_IRQS_DISABLED,
1663 &q->u.in.queue_irq_state))
1664 return 0;
1665 else
1666 return 1;
1669 EXPORT_SYMBOL(qdio_start_irq);
1672 * qdio_get_next_buffers - process input buffers
1673 * @cdev: associated ccw_device for the qdio subchannel
1674 * @nr: input queue number
1675 * @bufnr: first filled buffer number
1676 * @error: buffers are in error state
1678 * Return codes
1679 * < 0 - error
1680 * = 0 - no new buffers found
1681 * > 0 - number of processed buffers
1683 int qdio_get_next_buffers(struct ccw_device *cdev, int nr, int *bufnr,
1684 int *error)
1686 struct qdio_q *q;
1687 int start, end;
1688 struct qdio_irq *irq_ptr = cdev->private->qdio_data;
1690 if (!irq_ptr)
1691 return -ENODEV;
1692 q = irq_ptr->input_qs[nr];
1695 * Cannot rely on automatic sync after interrupt since queues may
1696 * also be examined without interrupt.
1698 if (need_siga_sync(q))
1699 qdio_sync_queues(q);
1701 /* check the PCI capable outbound queues. */
1702 qdio_check_outbound_after_thinint(q);
1704 if (!qdio_inbound_q_moved(q))
1705 return 0;
1707 /* Note: upper-layer MUST stop processing immediately here ... */
1708 if (unlikely(q->irq_ptr->state != QDIO_IRQ_STATE_ACTIVE))
1709 return -EIO;
1711 start = q->first_to_kick;
1712 end = q->first_to_check;
1713 *bufnr = start;
1714 *error = q->qdio_error;
1716 /* for the next time */
1717 q->first_to_kick = end;
1718 q->qdio_error = 0;
1719 return sub_buf(end, start);
1721 EXPORT_SYMBOL(qdio_get_next_buffers);
1724 * qdio_stop_irq - disable interrupt processing for the device
1725 * @cdev: associated ccw_device for the qdio subchannel
1726 * @nr: input queue number
1728 * Return codes
1729 * 0 - interrupts were already disabled
1730 * 1 - interrupts successfully disabled
1732 int qdio_stop_irq(struct ccw_device *cdev, int nr)
1734 struct qdio_q *q;
1735 struct qdio_irq *irq_ptr = cdev->private->qdio_data;
1737 if (!irq_ptr)
1738 return -ENODEV;
1739 q = irq_ptr->input_qs[nr];
1741 if (test_and_set_bit(QDIO_QUEUE_IRQS_DISABLED,
1742 &q->u.in.queue_irq_state))
1743 return 0;
1744 else
1745 return 1;
1747 EXPORT_SYMBOL(qdio_stop_irq);
1750 * qdio_pnso_brinfo() - perform network subchannel op #0 - bridge info.
1751 * @schid: Subchannel ID.
1752 * @cnc: Boolean Change-Notification Control
1753 * @response: Response code will be stored at this address
1754 * @cb: Callback function will be executed for each element
1755 * of the address list
1756 * @priv: Pointer to pass to the callback function.
1758 * Performs "Store-network-bridging-information list" operation and calls
1759 * the callback function for every entry in the list. If "change-
1760 * notification-control" is set, further changes in the address list
1761 * will be reported via the IPA command.
1763 int qdio_pnso_brinfo(struct subchannel_id schid,
1764 int cnc, u16 *response,
1765 void (*cb)(void *priv, enum qdio_brinfo_entry_type type,
1766 void *entry),
1767 void *priv)
1769 struct chsc_pnso_area *rr;
1770 int rc;
1771 u32 prev_instance = 0;
1772 int isfirstblock = 1;
1773 int i, size, elems;
1775 rr = (struct chsc_pnso_area *)get_zeroed_page(GFP_KERNEL);
1776 if (rr == NULL)
1777 return -ENOMEM;
1778 do {
1779 /* on the first iteration, naihdr.resume_token will be zero */
1780 rc = chsc_pnso_brinfo(schid, rr, rr->naihdr.resume_token, cnc);
1781 if (rc != 0 && rc != -EBUSY)
1782 goto out;
1783 if (rr->response.code != 1) {
1784 rc = -EIO;
1785 continue;
1786 } else
1787 rc = 0;
1789 if (cb == NULL)
1790 continue;
1792 size = rr->naihdr.naids;
1793 elems = (rr->response.length -
1794 sizeof(struct chsc_header) -
1795 sizeof(struct chsc_brinfo_naihdr)) /
1796 size;
1798 if (!isfirstblock && (rr->naihdr.instance != prev_instance)) {
1799 /* Inform the caller that they need to scrap */
1800 /* the data that was already reported via cb */
1801 rc = -EAGAIN;
1802 break;
1804 isfirstblock = 0;
1805 prev_instance = rr->naihdr.instance;
1806 for (i = 0; i < elems; i++)
1807 switch (size) {
1808 case sizeof(struct qdio_brinfo_entry_l3_ipv6):
1809 (*cb)(priv, l3_ipv6_addr,
1810 &rr->entries.l3_ipv6[i]);
1811 break;
1812 case sizeof(struct qdio_brinfo_entry_l3_ipv4):
1813 (*cb)(priv, l3_ipv4_addr,
1814 &rr->entries.l3_ipv4[i]);
1815 break;
1816 case sizeof(struct qdio_brinfo_entry_l2):
1817 (*cb)(priv, l2_addr_lnid,
1818 &rr->entries.l2[i]);
1819 break;
1820 default:
1821 WARN_ON_ONCE(1);
1822 rc = -EIO;
1823 goto out;
1825 } while (rr->response.code == 0x0107 || /* channel busy */
1826 (rr->response.code == 1 && /* list stored */
1827 /* resume token is non-zero => list incomplete */
1828 (rr->naihdr.resume_token.t1 || rr->naihdr.resume_token.t2)));
1829 (*response) = rr->response.code;
1831 out:
1832 free_page((unsigned long)rr);
1833 return rc;
1835 EXPORT_SYMBOL_GPL(qdio_pnso_brinfo);
1837 static int __init init_QDIO(void)
1839 int rc;
1841 rc = qdio_debug_init();
1842 if (rc)
1843 return rc;
1844 rc = qdio_setup_init();
1845 if (rc)
1846 goto out_debug;
1847 rc = tiqdio_allocate_memory();
1848 if (rc)
1849 goto out_cache;
1850 rc = tiqdio_register_thinints();
1851 if (rc)
1852 goto out_ti;
1853 return 0;
1855 out_ti:
1856 tiqdio_free_memory();
1857 out_cache:
1858 qdio_setup_exit();
1859 out_debug:
1860 qdio_debug_exit();
1861 return rc;
1864 static void __exit exit_QDIO(void)
1866 tiqdio_unregister_thinints();
1867 tiqdio_free_memory();
1868 qdio_setup_exit();
1869 qdio_debug_exit();
1872 module_init(init_QDIO);
1873 module_exit(exit_QDIO);