Linux 4.19.133
[linux/fpc-iii.git] / drivers / staging / octeon / ethernet-mdio.c
blobf67f950438873a764f45f66ec3b96819189ef1a8
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * This file is based on code from OCTEON SDK by Cavium Networks.
5 * Copyright (c) 2003-2007 Cavium Networks
6 */
8 #include <linux/kernel.h>
9 #include <linux/ethtool.h>
10 #include <linux/phy.h>
11 #include <linux/ratelimit.h>
12 #include <linux/of_mdio.h>
13 #include <generated/utsrelease.h>
14 #include <net/dst.h>
16 #include <asm/octeon/octeon.h>
18 #include "ethernet-defines.h"
19 #include "octeon-ethernet.h"
20 #include "ethernet-mdio.h"
21 #include "ethernet-util.h"
23 #include <asm/octeon/cvmx-gmxx-defs.h>
24 #include <asm/octeon/cvmx-smix-defs.h>
26 static void cvm_oct_get_drvinfo(struct net_device *dev,
27 struct ethtool_drvinfo *info)
29 strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver));
30 strlcpy(info->version, UTS_RELEASE, sizeof(info->version));
31 strlcpy(info->bus_info, "Builtin", sizeof(info->bus_info));
34 static int cvm_oct_nway_reset(struct net_device *dev)
36 if (!capable(CAP_NET_ADMIN))
37 return -EPERM;
39 if (dev->phydev)
40 return phy_start_aneg(dev->phydev);
42 return -EINVAL;
45 const struct ethtool_ops cvm_oct_ethtool_ops = {
46 .get_drvinfo = cvm_oct_get_drvinfo,
47 .nway_reset = cvm_oct_nway_reset,
48 .get_link = ethtool_op_get_link,
49 .get_link_ksettings = phy_ethtool_get_link_ksettings,
50 .set_link_ksettings = phy_ethtool_set_link_ksettings,
53 /**
54 * cvm_oct_ioctl - IOCTL support for PHY control
55 * @dev: Device to change
56 * @rq: the request
57 * @cmd: the command
59 * Returns Zero on success
61 int cvm_oct_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
63 if (!netif_running(dev))
64 return -EINVAL;
66 if (!dev->phydev)
67 return -EINVAL;
69 return phy_mii_ioctl(dev->phydev, rq, cmd);
72 void cvm_oct_note_carrier(struct octeon_ethernet *priv,
73 cvmx_helper_link_info_t li)
75 if (li.s.link_up) {
76 pr_notice_ratelimited("%s: %u Mbps %s duplex, port %d, queue %d\n",
77 netdev_name(priv->netdev), li.s.speed,
78 (li.s.full_duplex) ? "Full" : "Half",
79 priv->port, priv->queue);
80 } else {
81 pr_notice_ratelimited("%s: Link down\n",
82 netdev_name(priv->netdev));
86 void cvm_oct_adjust_link(struct net_device *dev)
88 struct octeon_ethernet *priv = netdev_priv(dev);
89 cvmx_helper_link_info_t link_info;
91 link_info.u64 = 0;
92 link_info.s.link_up = dev->phydev->link ? 1 : 0;
93 link_info.s.full_duplex = dev->phydev->duplex ? 1 : 0;
94 link_info.s.speed = dev->phydev->speed;
95 priv->link_info = link_info.u64;
98 * The polling task need to know about link status changes.
100 if (priv->poll)
101 priv->poll(dev);
103 if (priv->last_link != dev->phydev->link) {
104 priv->last_link = dev->phydev->link;
105 cvmx_helper_link_set(priv->port, link_info);
106 cvm_oct_note_carrier(priv, link_info);
110 int cvm_oct_common_stop(struct net_device *dev)
112 struct octeon_ethernet *priv = netdev_priv(dev);
113 int interface = INTERFACE(priv->port);
114 cvmx_helper_link_info_t link_info;
115 union cvmx_gmxx_prtx_cfg gmx_cfg;
116 int index = INDEX(priv->port);
118 gmx_cfg.u64 = cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));
119 gmx_cfg.s.en = 0;
120 cvmx_write_csr(CVMX_GMXX_PRTX_CFG(index, interface), gmx_cfg.u64);
122 priv->poll = NULL;
124 if (dev->phydev)
125 phy_disconnect(dev->phydev);
127 if (priv->last_link) {
128 link_info.u64 = 0;
129 priv->last_link = 0;
131 cvmx_helper_link_set(priv->port, link_info);
132 cvm_oct_note_carrier(priv, link_info);
134 return 0;
138 * cvm_oct_phy_setup_device - setup the PHY
140 * @dev: Device to setup
142 * Returns Zero on success, negative on failure
144 int cvm_oct_phy_setup_device(struct net_device *dev)
146 struct octeon_ethernet *priv = netdev_priv(dev);
147 struct device_node *phy_node;
148 struct phy_device *phydev = NULL;
150 if (!priv->of_node)
151 goto no_phy;
153 phy_node = of_parse_phandle(priv->of_node, "phy-handle", 0);
154 if (!phy_node && of_phy_is_fixed_link(priv->of_node)) {
155 int rc;
157 rc = of_phy_register_fixed_link(priv->of_node);
158 if (rc)
159 return rc;
161 phy_node = of_node_get(priv->of_node);
163 if (!phy_node)
164 goto no_phy;
166 phydev = of_phy_connect(dev, phy_node, cvm_oct_adjust_link, 0,
167 PHY_INTERFACE_MODE_GMII);
168 of_node_put(phy_node);
170 if (!phydev)
171 return -ENODEV;
173 priv->last_link = 0;
174 phy_start_aneg(phydev);
176 return 0;
177 no_phy:
178 /* If there is no phy, assume a direct MAC connection and that
179 * the link is up.
181 netif_carrier_on(dev);
182 return 0;