1 // SPDX-License-Identifier: GPL-2.0
3 * This file is based on code from OCTEON SDK by Cavium Networks.
5 * Copyright (c) 2003-2010 Cavium Networks
8 #include <linux/module.h>
9 #include <linux/kernel.h>
10 #include <linux/netdevice.h>
11 #include <linux/etherdevice.h>
13 #include <linux/ratelimit.h>
14 #include <linux/string.h>
15 #include <linux/interrupt.h>
18 #include <linux/xfrm.h>
20 #endif /* CONFIG_XFRM */
22 #include <linux/atomic.h>
23 #include <net/sch_generic.h>
25 #include <asm/octeon/octeon.h>
27 #include "ethernet-defines.h"
28 #include "octeon-ethernet.h"
29 #include "ethernet-tx.h"
30 #include "ethernet-util.h"
32 #include <asm/octeon/cvmx-wqe.h>
33 #include <asm/octeon/cvmx-fau.h>
34 #include <asm/octeon/cvmx-pip.h>
35 #include <asm/octeon/cvmx-pko.h>
36 #include <asm/octeon/cvmx-helper.h>
38 #include <asm/octeon/cvmx-gmxx-defs.h>
40 #define CVM_OCT_SKB_CB(skb) ((u64 *)((skb)->cb))
43 * You can define GET_SKBUFF_QOS() to override how the skbuff output
44 * function determines which output queue is used. The default
45 * implementation always uses the base queue for the port. If, for
46 * example, you wanted to use the skb->priority field, define
47 * GET_SKBUFF_QOS as: #define GET_SKBUFF_QOS(skb) ((skb)->priority)
49 #ifndef GET_SKBUFF_QOS
50 #define GET_SKBUFF_QOS(skb) 0
53 static void cvm_oct_tx_do_cleanup(unsigned long arg
);
54 static DECLARE_TASKLET(cvm_oct_tx_cleanup_tasklet
, cvm_oct_tx_do_cleanup
, 0);
56 /* Maximum number of SKBs to try to free per xmit packet. */
57 #define MAX_SKB_TO_FREE (MAX_OUT_QUEUE_DEPTH * 2)
59 static inline int cvm_oct_adjust_skb_to_free(int skb_to_free
, int fau
)
63 undo
= skb_to_free
> 0 ? MAX_SKB_TO_FREE
: skb_to_free
+
66 cvmx_fau_atomic_add32(fau
, -undo
);
67 skb_to_free
= -skb_to_free
> MAX_SKB_TO_FREE
? MAX_SKB_TO_FREE
:
72 static void cvm_oct_kick_tx_poll_watchdog(void)
74 union cvmx_ciu_timx ciu_timx
;
77 ciu_timx
.s
.one_shot
= 1;
78 ciu_timx
.s
.len
= cvm_oct_tx_poll_interval
;
79 cvmx_write_csr(CVMX_CIU_TIMX(1), ciu_timx
.u64
);
82 static void cvm_oct_free_tx_skbs(struct net_device
*dev
)
85 int qos
, queues_per_port
;
87 int total_remaining
= 0;
89 struct octeon_ethernet
*priv
= netdev_priv(dev
);
91 queues_per_port
= cvmx_pko_get_num_queues(priv
->port
);
92 /* Drain any pending packets in the free list */
93 for (qos
= 0; qos
< queues_per_port
; qos
++) {
94 if (skb_queue_len(&priv
->tx_free_list
[qos
]) == 0)
96 skb_to_free
= cvmx_fau_fetch_and_add32(priv
->fau
+ qos
* 4,
98 skb_to_free
= cvm_oct_adjust_skb_to_free(skb_to_free
,
100 total_freed
+= skb_to_free
;
101 if (skb_to_free
> 0) {
102 struct sk_buff
*to_free_list
= NULL
;
104 spin_lock_irqsave(&priv
->tx_free_list
[qos
].lock
, flags
);
105 while (skb_to_free
> 0) {
108 t
= __skb_dequeue(&priv
->tx_free_list
[qos
]);
109 t
->next
= to_free_list
;
113 spin_unlock_irqrestore(&priv
->tx_free_list
[qos
].lock
,
115 /* Do the actual freeing outside of the lock. */
116 while (to_free_list
) {
117 struct sk_buff
*t
= to_free_list
;
119 to_free_list
= to_free_list
->next
;
120 dev_kfree_skb_any(t
);
123 total_remaining
+= skb_queue_len(&priv
->tx_free_list
[qos
]);
125 if (total_remaining
< MAX_OUT_QUEUE_DEPTH
&& netif_queue_stopped(dev
))
126 netif_wake_queue(dev
);
128 cvm_oct_kick_tx_poll_watchdog();
132 * cvm_oct_xmit - transmit a packet
133 * @skb: Packet to send
134 * @dev: Device info structure
136 * Returns Always returns NETDEV_TX_OK
138 int cvm_oct_xmit(struct sk_buff
*skb
, struct net_device
*dev
)
140 cvmx_pko_command_word0_t pko_command
;
141 union cvmx_buf_ptr hw_buffer
;
146 enum {QUEUE_CORE
, QUEUE_HW
, QUEUE_DROP
} queue_type
;
147 struct octeon_ethernet
*priv
= netdev_priv(dev
);
148 struct sk_buff
*to_free_list
;
153 #if REUSE_SKBUFFS_WITHOUT_FREE
154 unsigned char *fpa_head
;
158 * Prefetch the private data structure. It is larger than the
164 * The check on CVMX_PKO_QUEUES_PER_PORT_* is designed to
165 * completely remove "qos" in the event neither interface
166 * supports multiple queues per port.
168 if ((CVMX_PKO_QUEUES_PER_PORT_INTERFACE0
> 1) ||
169 (CVMX_PKO_QUEUES_PER_PORT_INTERFACE1
> 1)) {
170 qos
= GET_SKBUFF_QOS(skb
);
173 else if (qos
>= cvmx_pko_get_num_queues(priv
->port
))
179 if (USE_ASYNC_IOBDMA
) {
180 /* Save scratch in case userspace is using it */
182 old_scratch
= cvmx_scratch_read64(CVMX_SCR_SCRATCH
);
183 old_scratch2
= cvmx_scratch_read64(CVMX_SCR_SCRATCH
+ 8);
186 * Fetch and increment the number of packets to be
189 cvmx_fau_async_fetch_and_add32(CVMX_SCR_SCRATCH
+ 8,
190 FAU_NUM_PACKET_BUFFERS_TO_FREE
,
192 cvmx_fau_async_fetch_and_add32(CVMX_SCR_SCRATCH
,
198 * We have space for 6 segment pointers, If there will be more
199 * than that, we must linearize.
201 if (unlikely(skb_shinfo(skb
)->nr_frags
> 5)) {
202 if (unlikely(__skb_linearize(skb
))) {
203 queue_type
= QUEUE_DROP
;
204 if (USE_ASYNC_IOBDMA
) {
206 * Get the number of skbuffs in use
211 cvmx_scratch_read64(CVMX_SCR_SCRATCH
);
214 * Get the number of skbuffs in use
217 skb_to_free
= cvmx_fau_fetch_and_add32(
218 priv
->fau
+ qos
* 4, MAX_SKB_TO_FREE
);
220 skb_to_free
= cvm_oct_adjust_skb_to_free(skb_to_free
,
223 spin_lock_irqsave(&priv
->tx_free_list
[qos
].lock
, flags
);
229 * The CN3XXX series of parts has an errata (GMX-401) which
230 * causes the GMX block to hang if a collision occurs towards
231 * the end of a <68 byte packet. As a workaround for this, we
232 * pad packets to be 68 bytes whenever we are in half duplex
233 * mode. We don't handle the case of having a small packet but
234 * no room to add the padding. The kernel should always give
235 * us at least a cache line
237 if ((skb
->len
< 64) && OCTEON_IS_MODEL(OCTEON_CN3XXX
)) {
238 union cvmx_gmxx_prtx_cfg gmx_prt_cfg
;
239 int interface
= INTERFACE(priv
->port
);
240 int index
= INDEX(priv
->port
);
243 /* We only need to pad packet in half duplex mode */
245 cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index
, interface
));
246 if (gmx_prt_cfg
.s
.duplex
== 0) {
247 int add_bytes
= 64 - skb
->len
;
249 if ((skb_tail_pointer(skb
) + add_bytes
) <=
250 skb_end_pointer(skb
))
251 __skb_put_zero(skb
, add_bytes
);
256 /* Build the PKO command */
258 #ifdef __LITTLE_ENDIAN
259 pko_command
.s
.le
= 1;
261 pko_command
.s
.n2
= 1; /* Don't pollute L2 with the outgoing packet */
262 pko_command
.s
.segs
= 1;
263 pko_command
.s
.total_bytes
= skb
->len
;
264 pko_command
.s
.size0
= CVMX_FAU_OP_SIZE_32
;
265 pko_command
.s
.subone0
= 1;
267 pko_command
.s
.dontfree
= 1;
269 /* Build the PKO buffer pointer */
271 if (skb_shinfo(skb
)->nr_frags
== 0) {
272 hw_buffer
.s
.addr
= XKPHYS_TO_PHYS((u64
)skb
->data
);
273 hw_buffer
.s
.pool
= 0;
274 hw_buffer
.s
.size
= skb
->len
;
276 hw_buffer
.s
.addr
= XKPHYS_TO_PHYS((u64
)skb
->data
);
277 hw_buffer
.s
.pool
= 0;
278 hw_buffer
.s
.size
= skb_headlen(skb
);
279 CVM_OCT_SKB_CB(skb
)[0] = hw_buffer
.u64
;
280 for (i
= 0; i
< skb_shinfo(skb
)->nr_frags
; i
++) {
281 struct skb_frag_struct
*fs
= skb_shinfo(skb
)->frags
+ i
;
283 hw_buffer
.s
.addr
= XKPHYS_TO_PHYS(
284 (u64
)(page_address(fs
->page
.p
) +
286 hw_buffer
.s
.size
= fs
->size
;
287 CVM_OCT_SKB_CB(skb
)[i
+ 1] = hw_buffer
.u64
;
289 hw_buffer
.s
.addr
= XKPHYS_TO_PHYS((u64
)CVM_OCT_SKB_CB(skb
));
290 hw_buffer
.s
.size
= skb_shinfo(skb
)->nr_frags
+ 1;
291 pko_command
.s
.segs
= skb_shinfo(skb
)->nr_frags
+ 1;
292 pko_command
.s
.gather
= 1;
293 goto dont_put_skbuff_in_hw
;
297 * See if we can put this skb in the FPA pool. Any strange
298 * behavior from the Linux networking stack will most likely
299 * be caused by a bug in the following code. If some field is
300 * in use by the network stack and gets carried over when a
301 * buffer is reused, bad things may happen. If in doubt and
302 * you dont need the absolute best performance, disable the
303 * define REUSE_SKBUFFS_WITHOUT_FREE. The reuse of buffers has
304 * shown a 25% increase in performance under some loads.
306 #if REUSE_SKBUFFS_WITHOUT_FREE
307 fpa_head
= skb
->head
+ 256 - ((unsigned long)skb
->head
& 0x7f);
308 if (unlikely(skb
->data
< fpa_head
)) {
309 /* TX buffer beginning can't meet FPA alignment constraints */
310 goto dont_put_skbuff_in_hw
;
313 ((skb_end_pointer(skb
) - fpa_head
) < CVMX_FPA_PACKET_POOL_SIZE
)) {
314 /* TX buffer isn't large enough for the FPA */
315 goto dont_put_skbuff_in_hw
;
317 if (unlikely(skb_shared(skb
))) {
318 /* TX buffer sharing data with someone else */
319 goto dont_put_skbuff_in_hw
;
321 if (unlikely(skb_cloned(skb
))) {
322 /* TX buffer has been cloned */
323 goto dont_put_skbuff_in_hw
;
325 if (unlikely(skb_header_cloned(skb
))) {
326 /* TX buffer header has been cloned */
327 goto dont_put_skbuff_in_hw
;
329 if (unlikely(skb
->destructor
)) {
330 /* TX buffer has a destructor */
331 goto dont_put_skbuff_in_hw
;
333 if (unlikely(skb_shinfo(skb
)->nr_frags
)) {
334 /* TX buffer has fragments */
335 goto dont_put_skbuff_in_hw
;
339 sizeof(*skb
) + skb_end_offset(skb
))) {
340 /* TX buffer truesize has been changed */
341 goto dont_put_skbuff_in_hw
;
345 * We can use this buffer in the FPA. We don't need the FAU
348 pko_command
.s
.dontfree
= 0;
350 hw_buffer
.s
.back
= ((unsigned long)skb
->data
>> 7) -
351 ((unsigned long)fpa_head
>> 7);
353 *(struct sk_buff
**)(fpa_head
- sizeof(void *)) = skb
;
356 * The skbuff will be reused without ever being freed. We must
357 * cleanup a bunch of core things.
359 dst_release(skb_dst(skb
));
360 skb_dst_set(skb
, NULL
);
362 secpath_put(skb
->sp
);
367 #ifdef CONFIG_NET_SCHED
370 #endif /* CONFIG_NET_SCHED */
371 #endif /* REUSE_SKBUFFS_WITHOUT_FREE */
373 dont_put_skbuff_in_hw
:
375 /* Check if we can use the hardware checksumming */
376 if ((skb
->protocol
== htons(ETH_P_IP
)) &&
377 (ip_hdr(skb
)->version
== 4) &&
378 (ip_hdr(skb
)->ihl
== 5) &&
379 ((ip_hdr(skb
)->frag_off
== 0) ||
380 (ip_hdr(skb
)->frag_off
== htons(1 << 14))) &&
381 ((ip_hdr(skb
)->protocol
== IPPROTO_TCP
) ||
382 (ip_hdr(skb
)->protocol
== IPPROTO_UDP
))) {
383 /* Use hardware checksum calc */
384 pko_command
.s
.ipoffp1
= skb_network_offset(skb
) + 1;
387 if (USE_ASYNC_IOBDMA
) {
388 /* Get the number of skbuffs in use by the hardware */
390 skb_to_free
= cvmx_scratch_read64(CVMX_SCR_SCRATCH
);
391 buffers_to_free
= cvmx_scratch_read64(CVMX_SCR_SCRATCH
+ 8);
393 /* Get the number of skbuffs in use by the hardware */
394 skb_to_free
= cvmx_fau_fetch_and_add32(priv
->fau
+ qos
* 4,
397 cvmx_fau_fetch_and_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE
, 0);
400 skb_to_free
= cvm_oct_adjust_skb_to_free(skb_to_free
,
401 priv
->fau
+ qos
* 4);
404 * If we're sending faster than the receive can free them then
405 * don't do the HW free.
407 if ((buffers_to_free
< -100) && !pko_command
.s
.dontfree
)
408 pko_command
.s
.dontfree
= 1;
410 if (pko_command
.s
.dontfree
) {
411 queue_type
= QUEUE_CORE
;
412 pko_command
.s
.reg0
= priv
->fau
+ qos
* 4;
414 queue_type
= QUEUE_HW
;
416 if (USE_ASYNC_IOBDMA
)
417 cvmx_fau_async_fetch_and_add32(
418 CVMX_SCR_SCRATCH
, FAU_TOTAL_TX_TO_CLEAN
, 1);
420 spin_lock_irqsave(&priv
->tx_free_list
[qos
].lock
, flags
);
422 /* Drop this packet if we have too many already queued to the HW */
423 if (unlikely(skb_queue_len(&priv
->tx_free_list
[qos
]) >=
424 MAX_OUT_QUEUE_DEPTH
)) {
425 if (dev
->tx_queue_len
!= 0) {
426 /* Drop the lock when notifying the core. */
427 spin_unlock_irqrestore(&priv
->tx_free_list
[qos
].lock
,
429 netif_stop_queue(dev
);
430 spin_lock_irqsave(&priv
->tx_free_list
[qos
].lock
,
433 /* If not using normal queueing. */
434 queue_type
= QUEUE_DROP
;
439 cvmx_pko_send_packet_prepare(priv
->port
, priv
->queue
+ qos
,
442 /* Send the packet to the output queue */
443 if (unlikely(cvmx_pko_send_packet_finish(priv
->port
,
445 pko_command
, hw_buffer
,
446 CVMX_PKO_LOCK_NONE
))) {
447 printk_ratelimited("%s: Failed to send the packet\n",
449 queue_type
= QUEUE_DROP
;
454 switch (queue_type
) {
456 skb
->next
= to_free_list
;
458 dev
->stats
.tx_dropped
++;
461 cvmx_fau_atomic_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE
, -1);
464 __skb_queue_tail(&priv
->tx_free_list
[qos
], skb
);
470 while (skb_to_free
> 0) {
471 struct sk_buff
*t
= __skb_dequeue(&priv
->tx_free_list
[qos
]);
473 t
->next
= to_free_list
;
478 spin_unlock_irqrestore(&priv
->tx_free_list
[qos
].lock
, flags
);
480 /* Do the actual freeing outside of the lock. */
481 while (to_free_list
) {
482 struct sk_buff
*t
= to_free_list
;
484 to_free_list
= to_free_list
->next
;
485 dev_kfree_skb_any(t
);
488 if (USE_ASYNC_IOBDMA
) {
490 total_to_clean
= cvmx_scratch_read64(CVMX_SCR_SCRATCH
);
491 /* Restore the scratch area */
492 cvmx_scratch_write64(CVMX_SCR_SCRATCH
, old_scratch
);
493 cvmx_scratch_write64(CVMX_SCR_SCRATCH
+ 8, old_scratch2
);
495 total_to_clean
= cvmx_fau_fetch_and_add32(
496 FAU_TOTAL_TX_TO_CLEAN
, 1);
499 if (total_to_clean
& 0x3ff) {
501 * Schedule the cleanup tasklet every 1024 packets for
502 * the pathological case of high traffic on one port
503 * delaying clean up of packets on a different port
504 * that is blocked waiting for the cleanup.
506 tasklet_schedule(&cvm_oct_tx_cleanup_tasklet
);
509 cvm_oct_kick_tx_poll_watchdog();
515 * cvm_oct_xmit_pow - transmit a packet to the POW
516 * @skb: Packet to send
517 * @dev: Device info structure
519 * Returns Always returns zero
521 int cvm_oct_xmit_pow(struct sk_buff
*skb
, struct net_device
*dev
)
523 struct octeon_ethernet
*priv
= netdev_priv(dev
);
527 /* Get a work queue entry */
528 cvmx_wqe_t
*work
= cvmx_fpa_alloc(CVMX_FPA_WQE_POOL
);
530 if (unlikely(!work
)) {
531 printk_ratelimited("%s: Failed to allocate a work queue entry\n",
533 dev
->stats
.tx_dropped
++;
534 dev_kfree_skb_any(skb
);
538 /* Get a packet buffer */
539 packet_buffer
= cvmx_fpa_alloc(CVMX_FPA_PACKET_POOL
);
540 if (unlikely(!packet_buffer
)) {
541 printk_ratelimited("%s: Failed to allocate a packet buffer\n",
543 cvmx_fpa_free(work
, CVMX_FPA_WQE_POOL
, 1);
544 dev
->stats
.tx_dropped
++;
545 dev_kfree_skb_any(skb
);
550 * Calculate where we need to copy the data to. We need to
551 * leave 8 bytes for a next pointer (unused). We also need to
552 * include any configure skip. Then we need to align the IP
553 * packet src and dest into the same 64bit word. The below
554 * calculation may add a little extra, but that doesn't
557 copy_location
= packet_buffer
+ sizeof(u64
);
558 copy_location
+= ((CVMX_HELPER_FIRST_MBUFF_SKIP
+ 7) & 0xfff8) + 6;
561 * We have to copy the packet since whoever processes this
562 * packet will free it to a hardware pool. We can't use the
563 * trick of counting outstanding packets like in
566 memcpy(copy_location
, skb
->data
, skb
->len
);
569 * Fill in some of the work queue fields. We may need to add
570 * more if the software at the other end needs them.
572 if (!OCTEON_IS_MODEL(OCTEON_CN68XX
))
573 work
->word0
.pip
.cn38xx
.hw_chksum
= skb
->csum
;
574 work
->word1
.len
= skb
->len
;
575 cvmx_wqe_set_port(work
, priv
->port
);
576 cvmx_wqe_set_qos(work
, priv
->port
& 0x7);
577 cvmx_wqe_set_grp(work
, pow_send_group
);
578 work
->word1
.tag_type
= CVMX_HELPER_INPUT_TAG_TYPE
;
579 work
->word1
.tag
= pow_send_group
; /* FIXME */
580 /* Default to zero. Sets of zero later are commented out */
582 work
->word2
.s
.bufs
= 1;
583 work
->packet_ptr
.u64
= 0;
584 work
->packet_ptr
.s
.addr
= cvmx_ptr_to_phys(copy_location
);
585 work
->packet_ptr
.s
.pool
= CVMX_FPA_PACKET_POOL
;
586 work
->packet_ptr
.s
.size
= CVMX_FPA_PACKET_POOL_SIZE
;
587 work
->packet_ptr
.s
.back
= (copy_location
- packet_buffer
) >> 7;
589 if (skb
->protocol
== htons(ETH_P_IP
)) {
590 work
->word2
.s
.ip_offset
= 14;
592 work
->word2
.s
.vlan_valid
= 0; /* FIXME */
593 work
->word2
.s
.vlan_cfi
= 0; /* FIXME */
594 work
->word2
.s
.vlan_id
= 0; /* FIXME */
595 work
->word2
.s
.dec_ipcomp
= 0; /* FIXME */
597 work
->word2
.s
.tcp_or_udp
=
598 (ip_hdr(skb
)->protocol
== IPPROTO_TCP
) ||
599 (ip_hdr(skb
)->protocol
== IPPROTO_UDP
);
602 work
->word2
.s
.dec_ipsec
= 0;
603 /* We only support IPv4 right now */
604 work
->word2
.s
.is_v6
= 0;
605 /* Hardware would set to zero */
606 work
->word2
.s
.software
= 0;
607 /* No error, packet is internal */
608 work
->word2
.s
.L4_error
= 0;
610 work
->word2
.s
.is_frag
= !((ip_hdr(skb
)->frag_off
== 0) ||
611 (ip_hdr(skb
)->frag_off
==
614 /* Assume Linux is sending a good packet */
615 work
->word2
.s
.IP_exc
= 0;
617 work
->word2
.s
.is_bcast
= (skb
->pkt_type
== PACKET_BROADCAST
);
618 work
->word2
.s
.is_mcast
= (skb
->pkt_type
== PACKET_MULTICAST
);
620 /* This is an IP packet */
621 work
->word2
.s
.not_IP
= 0;
622 /* No error, packet is internal */
623 work
->word2
.s
.rcv_error
= 0;
624 /* No error, packet is internal */
625 work
->word2
.s
.err_code
= 0;
629 * When copying the data, include 4 bytes of the
630 * ethernet header to align the same way hardware
633 memcpy(work
->packet_data
, skb
->data
+ 10,
634 sizeof(work
->packet_data
));
637 work
->word2
.snoip
.vlan_valid
= 0; /* FIXME */
638 work
->word2
.snoip
.vlan_cfi
= 0; /* FIXME */
639 work
->word2
.snoip
.vlan_id
= 0; /* FIXME */
640 work
->word2
.snoip
.software
= 0; /* Hardware would set to zero */
642 work
->word2
.snoip
.is_rarp
= skb
->protocol
== htons(ETH_P_RARP
);
643 work
->word2
.snoip
.is_arp
= skb
->protocol
== htons(ETH_P_ARP
);
644 work
->word2
.snoip
.is_bcast
=
645 (skb
->pkt_type
== PACKET_BROADCAST
);
646 work
->word2
.snoip
.is_mcast
=
647 (skb
->pkt_type
== PACKET_MULTICAST
);
648 work
->word2
.snoip
.not_IP
= 1; /* IP was done up above */
650 /* No error, packet is internal */
651 work
->word2
.snoip
.rcv_error
= 0;
652 /* No error, packet is internal */
653 work
->word2
.snoip
.err_code
= 0;
655 memcpy(work
->packet_data
, skb
->data
, sizeof(work
->packet_data
));
658 /* Submit the packet to the POW */
659 cvmx_pow_work_submit(work
, work
->word1
.tag
, work
->word1
.tag_type
,
660 cvmx_wqe_get_qos(work
), cvmx_wqe_get_grp(work
));
661 dev
->stats
.tx_packets
++;
662 dev
->stats
.tx_bytes
+= skb
->len
;
663 dev_consume_skb_any(skb
);
668 * cvm_oct_tx_shutdown_dev - free all skb that are currently queued for TX.
669 * @dev: Device being shutdown
672 void cvm_oct_tx_shutdown_dev(struct net_device
*dev
)
674 struct octeon_ethernet
*priv
= netdev_priv(dev
);
678 for (qos
= 0; qos
< 16; qos
++) {
679 spin_lock_irqsave(&priv
->tx_free_list
[qos
].lock
, flags
);
680 while (skb_queue_len(&priv
->tx_free_list
[qos
]))
681 dev_kfree_skb_any(__skb_dequeue
682 (&priv
->tx_free_list
[qos
]));
683 spin_unlock_irqrestore(&priv
->tx_free_list
[qos
].lock
, flags
);
687 static void cvm_oct_tx_do_cleanup(unsigned long arg
)
691 for (port
= 0; port
< TOTAL_NUMBER_OF_PORTS
; port
++) {
692 if (cvm_oct_device
[port
]) {
693 struct net_device
*dev
= cvm_oct_device
[port
];
695 cvm_oct_free_tx_skbs(dev
);
700 static irqreturn_t
cvm_oct_tx_cleanup_watchdog(int cpl
, void *dev_id
)
702 /* Disable the interrupt. */
703 cvmx_write_csr(CVMX_CIU_TIMX(1), 0);
704 /* Do the work in the tasklet. */
705 tasklet_schedule(&cvm_oct_tx_cleanup_tasklet
);
709 void cvm_oct_tx_initialize(void)
713 /* Disable the interrupt. */
714 cvmx_write_csr(CVMX_CIU_TIMX(1), 0);
715 /* Register an IRQ handler to receive CIU_TIMX(1) interrupts */
716 i
= request_irq(OCTEON_IRQ_TIMER1
,
717 cvm_oct_tx_cleanup_watchdog
, 0,
718 "Ethernet", cvm_oct_device
);
721 panic("Could not acquire Ethernet IRQ %d\n", OCTEON_IRQ_TIMER1
);
724 void cvm_oct_tx_shutdown(void)
726 /* Free the interrupt handler */
727 free_irq(OCTEON_IRQ_TIMER1
, cvm_oct_device
);