1 // SPDX-License-Identifier: GPL-2.0
3 * UIO driver for Hilscher NetX based fieldbus cards (cifX, comX).
4 * See http://www.hilscher.com for details.
6 * (C) 2007 Hans J. Koch <hjk@hansjkoch.de>
7 * (C) 2008 Manuel Traut <manut@linutronix.de>
11 #include <linux/device.h>
13 #include <linux/module.h>
14 #include <linux/pci.h>
15 #include <linux/slab.h>
16 #include <linux/uio_driver.h>
18 #define PCI_VENDOR_ID_HILSCHER 0x15CF
19 #define PCI_DEVICE_ID_HILSCHER_NETX 0x0000
20 #define PCI_DEVICE_ID_HILSCHER_NETPLC 0x0010
21 #define PCI_SUBDEVICE_ID_NETPLC_RAM 0x0000
22 #define PCI_SUBDEVICE_ID_NETPLC_FLASH 0x0001
23 #define PCI_SUBDEVICE_ID_NXSB_PCA 0x3235
24 #define PCI_SUBDEVICE_ID_NXPCA 0x3335
26 #define DPM_HOST_INT_EN0 0xfff0
27 #define DPM_HOST_INT_STAT0 0xffe0
29 #define DPM_HOST_INT_MASK 0xe600ffff
30 #define DPM_HOST_INT_GLOBAL_EN 0x80000000
32 static irqreturn_t
netx_handler(int irq
, struct uio_info
*dev_info
)
34 void __iomem
*int_enable_reg
= dev_info
->mem
[0].internal_addr
36 void __iomem
*int_status_reg
= dev_info
->mem
[0].internal_addr
39 /* Is one of our interrupts enabled and active ? */
40 if (!(ioread32(int_enable_reg
) & ioread32(int_status_reg
)
44 /* Disable interrupt */
45 iowrite32(ioread32(int_enable_reg
) & ~DPM_HOST_INT_GLOBAL_EN
,
50 static int netx_pci_probe(struct pci_dev
*dev
,
51 const struct pci_device_id
*id
)
53 struct uio_info
*info
;
56 info
= kzalloc(sizeof(struct uio_info
), GFP_KERNEL
);
60 if (pci_enable_device(dev
))
63 if (pci_request_regions(dev
, "netx"))
67 case PCI_DEVICE_ID_HILSCHER_NETX
:
71 case PCI_DEVICE_ID_HILSCHER_NETPLC
:
73 info
->name
= "netplc";
77 info
->name
= "netx_plx";
80 /* BAR0 or 2 points to the card's dual port memory */
81 info
->mem
[0].addr
= pci_resource_start(dev
, bar
);
82 if (!info
->mem
[0].addr
)
84 info
->mem
[0].internal_addr
= ioremap(pci_resource_start(dev
, bar
),
85 pci_resource_len(dev
, bar
));
87 if (!info
->mem
[0].internal_addr
)
90 info
->mem
[0].size
= pci_resource_len(dev
, bar
);
91 info
->mem
[0].memtype
= UIO_MEM_PHYS
;
93 info
->irq_flags
= IRQF_SHARED
;
94 info
->handler
= netx_handler
;
95 info
->version
= "0.0.1";
97 /* Make sure all interrupts are disabled */
98 iowrite32(0, info
->mem
[0].internal_addr
+ DPM_HOST_INT_EN0
);
100 if (uio_register_device(&dev
->dev
, info
))
103 pci_set_drvdata(dev
, info
);
104 dev_info(&dev
->dev
, "Found %s card, registered UIO device.\n",
110 iounmap(info
->mem
[0].internal_addr
);
112 pci_release_regions(dev
);
114 pci_disable_device(dev
);
120 static void netx_pci_remove(struct pci_dev
*dev
)
122 struct uio_info
*info
= pci_get_drvdata(dev
);
124 /* Disable all interrupts */
125 iowrite32(0, info
->mem
[0].internal_addr
+ DPM_HOST_INT_EN0
);
126 uio_unregister_device(info
);
127 pci_release_regions(dev
);
128 pci_disable_device(dev
);
129 iounmap(info
->mem
[0].internal_addr
);
134 static struct pci_device_id netx_pci_ids
[] = {
136 .vendor
= PCI_VENDOR_ID_HILSCHER
,
137 .device
= PCI_DEVICE_ID_HILSCHER_NETX
,
142 .vendor
= PCI_VENDOR_ID_HILSCHER
,
143 .device
= PCI_DEVICE_ID_HILSCHER_NETPLC
,
144 .subvendor
= PCI_VENDOR_ID_HILSCHER
,
145 .subdevice
= PCI_SUBDEVICE_ID_NETPLC_RAM
,
148 .vendor
= PCI_VENDOR_ID_HILSCHER
,
149 .device
= PCI_DEVICE_ID_HILSCHER_NETPLC
,
150 .subvendor
= PCI_VENDOR_ID_HILSCHER
,
151 .subdevice
= PCI_SUBDEVICE_ID_NETPLC_FLASH
,
154 .vendor
= PCI_VENDOR_ID_PLX
,
155 .device
= PCI_DEVICE_ID_PLX_9030
,
156 .subvendor
= PCI_VENDOR_ID_PLX
,
157 .subdevice
= PCI_SUBDEVICE_ID_NXSB_PCA
,
160 .vendor
= PCI_VENDOR_ID_PLX
,
161 .device
= PCI_DEVICE_ID_PLX_9030
,
162 .subvendor
= PCI_VENDOR_ID_PLX
,
163 .subdevice
= PCI_SUBDEVICE_ID_NXPCA
,
168 static struct pci_driver netx_pci_driver
= {
170 .id_table
= netx_pci_ids
,
171 .probe
= netx_pci_probe
,
172 .remove
= netx_pci_remove
,
175 module_pci_driver(netx_pci_driver
);
176 MODULE_DEVICE_TABLE(pci
, netx_pci_ids
);
177 MODULE_LICENSE("GPL v2");
178 MODULE_AUTHOR("Hans J. Koch, Manuel Traut");