Linux 4.19.133
[linux/fpc-iii.git] / drivers / watchdog / w83627hf_wdt.c
blob4b9365d4de7a9759c0ad741812b397d3aaf2d961
1 /*
2 * w83627hf/thf WDT driver
4 * (c) Copyright 2013 Guenter Roeck
5 * converted to watchdog infrastructure
7 * (c) Copyright 2007 Vlad Drukker <vlad@storewiz.com>
8 * added support for W83627THF.
10 * (c) Copyright 2003,2007 Pádraig Brady <P@draigBrady.com>
12 * Based on advantechwdt.c which is based on wdt.c.
13 * Original copyright messages:
15 * (c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl>
17 * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>,
18 * All Rights Reserved.
20 * This program is free software; you can redistribute it and/or
21 * modify it under the terms of the GNU General Public License
22 * as published by the Free Software Foundation; either version
23 * 2 of the License, or (at your option) any later version.
25 * Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
26 * warranty for any of this software. This material is provided
27 * "AS-IS" and at no charge.
29 * (c) Copyright 1995 Alan Cox <alan@lxorguk.ukuu.org.uk>
32 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
34 #include <linux/module.h>
35 #include <linux/moduleparam.h>
36 #include <linux/types.h>
37 #include <linux/watchdog.h>
38 #include <linux/ioport.h>
39 #include <linux/init.h>
40 #include <linux/io.h>
42 #define WATCHDOG_NAME "w83627hf/thf/hg/dhg WDT"
43 #define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */
45 static int wdt_io;
46 static int cr_wdt_timeout; /* WDT timeout register */
47 static int cr_wdt_control; /* WDT control register */
48 static int cr_wdt_csr; /* WDT control & status register */
50 enum chips { w83627hf, w83627s, w83697hf, w83697ug, w83637hf, w83627thf,
51 w83687thf, w83627ehf, w83627dhg, w83627uhg, w83667hg, w83627dhg_p,
52 w83667hg_b, nct6775, nct6776, nct6779, nct6791, nct6792, nct6793,
53 nct6795, nct6796, nct6102 };
55 static int timeout; /* in seconds */
56 module_param(timeout, int, 0);
57 MODULE_PARM_DESC(timeout,
58 "Watchdog timeout in seconds. 1 <= timeout <= 255, default="
59 __MODULE_STRING(WATCHDOG_TIMEOUT) ".");
61 static bool nowayout = WATCHDOG_NOWAYOUT;
62 module_param(nowayout, bool, 0);
63 MODULE_PARM_DESC(nowayout,
64 "Watchdog cannot be stopped once started (default="
65 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
67 static int early_disable;
68 module_param(early_disable, int, 0);
69 MODULE_PARM_DESC(early_disable, "Disable watchdog at boot time (default=0)");
72 * Kernel methods.
75 #define WDT_EFER (wdt_io+0) /* Extended Function Enable Registers */
76 #define WDT_EFIR (wdt_io+0) /* Extended Function Index Register
77 (same as EFER) */
78 #define WDT_EFDR (WDT_EFIR+1) /* Extended Function Data Register */
80 #define W83627HF_LD_WDT 0x08
82 #define W83627HF_ID 0x52
83 #define W83627S_ID 0x59
84 #define W83697HF_ID 0x60
85 #define W83697UG_ID 0x68
86 #define W83637HF_ID 0x70
87 #define W83627THF_ID 0x82
88 #define W83687THF_ID 0x85
89 #define W83627EHF_ID 0x88
90 #define W83627DHG_ID 0xa0
91 #define W83627UHG_ID 0xa2
92 #define W83667HG_ID 0xa5
93 #define W83627DHG_P_ID 0xb0
94 #define W83667HG_B_ID 0xb3
95 #define NCT6775_ID 0xb4
96 #define NCT6776_ID 0xc3
97 #define NCT6102_ID 0xc4
98 #define NCT6779_ID 0xc5
99 #define NCT6791_ID 0xc8
100 #define NCT6792_ID 0xc9
101 #define NCT6793_ID 0xd1
102 #define NCT6795_ID 0xd3
103 #define NCT6796_ID 0xd4 /* also NCT9697D, NCT9698D */
105 #define W83627HF_WDT_TIMEOUT 0xf6
106 #define W83697HF_WDT_TIMEOUT 0xf4
107 #define NCT6102D_WDT_TIMEOUT 0xf1
109 #define W83627HF_WDT_CONTROL 0xf5
110 #define W83697HF_WDT_CONTROL 0xf3
111 #define NCT6102D_WDT_CONTROL 0xf0
113 #define W836X7HF_WDT_CSR 0xf7
114 #define NCT6102D_WDT_CSR 0xf2
116 static void superio_outb(int reg, int val)
118 outb(reg, WDT_EFER);
119 outb(val, WDT_EFDR);
122 static inline int superio_inb(int reg)
124 outb(reg, WDT_EFER);
125 return inb(WDT_EFDR);
128 static int superio_enter(void)
130 if (!request_muxed_region(wdt_io, 2, WATCHDOG_NAME))
131 return -EBUSY;
133 outb_p(0x87, WDT_EFER); /* Enter extended function mode */
134 outb_p(0x87, WDT_EFER); /* Again according to manual */
136 return 0;
139 static void superio_select(int ld)
141 superio_outb(0x07, ld);
144 static void superio_exit(void)
146 outb_p(0xAA, WDT_EFER); /* Leave extended function mode */
147 release_region(wdt_io, 2);
150 static int w83627hf_init(struct watchdog_device *wdog, enum chips chip)
152 int ret;
153 unsigned char t;
155 ret = superio_enter();
156 if (ret)
157 return ret;
159 superio_select(W83627HF_LD_WDT);
161 /* set CR30 bit 0 to activate GPIO2 */
162 t = superio_inb(0x30);
163 if (!(t & 0x01))
164 superio_outb(0x30, t | 0x01);
166 switch (chip) {
167 case w83627hf:
168 case w83627s:
169 t = superio_inb(0x2B) & ~0x10;
170 superio_outb(0x2B, t); /* set GPIO24 to WDT0 */
171 break;
172 case w83697hf:
173 /* Set pin 119 to WDTO# mode (= CR29, WDT0) */
174 t = superio_inb(0x29) & ~0x60;
175 t |= 0x20;
176 superio_outb(0x29, t);
177 break;
178 case w83697ug:
179 /* Set pin 118 to WDTO# mode */
180 t = superio_inb(0x2b) & ~0x04;
181 superio_outb(0x2b, t);
182 break;
183 case w83627thf:
184 t = (superio_inb(0x2B) & ~0x08) | 0x04;
185 superio_outb(0x2B, t); /* set GPIO3 to WDT0 */
186 break;
187 case w83627dhg:
188 case w83627dhg_p:
189 t = superio_inb(0x2D) & ~0x01; /* PIN77 -> WDT0# */
190 superio_outb(0x2D, t); /* set GPIO5 to WDT0 */
191 t = superio_inb(cr_wdt_control);
192 t |= 0x02; /* enable the WDTO# output low pulse
193 * to the KBRST# pin */
194 superio_outb(cr_wdt_control, t);
195 break;
196 case w83637hf:
197 break;
198 case w83687thf:
199 t = superio_inb(0x2C) & ~0x80; /* PIN47 -> WDT0# */
200 superio_outb(0x2C, t);
201 break;
202 case w83627ehf:
203 case w83627uhg:
204 case w83667hg:
205 case w83667hg_b:
206 case nct6775:
207 case nct6776:
208 case nct6779:
209 case nct6791:
210 case nct6792:
211 case nct6793:
212 case nct6795:
213 case nct6796:
214 case nct6102:
216 * These chips have a fixed WDTO# output pin (W83627UHG),
217 * or support more than one WDTO# output pin.
218 * Don't touch its configuration, and hope the BIOS
219 * does the right thing.
221 t = superio_inb(cr_wdt_control);
222 t |= 0x02; /* enable the WDTO# output low pulse
223 * to the KBRST# pin */
224 superio_outb(cr_wdt_control, t);
225 break;
226 default:
227 break;
230 t = superio_inb(cr_wdt_timeout);
231 if (t != 0) {
232 if (early_disable) {
233 pr_warn("Stopping previously enabled watchdog until userland kicks in\n");
234 superio_outb(cr_wdt_timeout, 0);
235 } else {
236 pr_info("Watchdog already running. Resetting timeout to %d sec\n",
237 wdog->timeout);
238 superio_outb(cr_wdt_timeout, wdog->timeout);
242 /* set second mode & disable keyboard turning off watchdog */
243 t = superio_inb(cr_wdt_control) & ~0x0C;
244 superio_outb(cr_wdt_control, t);
246 /* reset trigger, disable keyboard & mouse turning off watchdog */
247 t = superio_inb(cr_wdt_csr) & ~0xD0;
248 superio_outb(cr_wdt_csr, t);
250 superio_exit();
252 return 0;
255 static int wdt_set_time(unsigned int timeout)
257 int ret;
259 ret = superio_enter();
260 if (ret)
261 return ret;
263 superio_select(W83627HF_LD_WDT);
264 superio_outb(cr_wdt_timeout, timeout);
265 superio_exit();
267 return 0;
270 static int wdt_start(struct watchdog_device *wdog)
272 return wdt_set_time(wdog->timeout);
275 static int wdt_stop(struct watchdog_device *wdog)
277 return wdt_set_time(0);
280 static int wdt_set_timeout(struct watchdog_device *wdog, unsigned int timeout)
282 wdog->timeout = timeout;
284 return 0;
287 static unsigned int wdt_get_time(struct watchdog_device *wdog)
289 unsigned int timeleft;
290 int ret;
292 ret = superio_enter();
293 if (ret)
294 return 0;
296 superio_select(W83627HF_LD_WDT);
297 timeleft = superio_inb(cr_wdt_timeout);
298 superio_exit();
300 return timeleft;
304 * Kernel Interfaces
307 static const struct watchdog_info wdt_info = {
308 .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
309 .identity = "W83627HF Watchdog",
312 static const struct watchdog_ops wdt_ops = {
313 .owner = THIS_MODULE,
314 .start = wdt_start,
315 .stop = wdt_stop,
316 .set_timeout = wdt_set_timeout,
317 .get_timeleft = wdt_get_time,
320 static struct watchdog_device wdt_dev = {
321 .info = &wdt_info,
322 .ops = &wdt_ops,
323 .timeout = WATCHDOG_TIMEOUT,
324 .min_timeout = 1,
325 .max_timeout = 255,
329 * The WDT needs to learn about soft shutdowns in order to
330 * turn the timebomb registers off.
333 static int wdt_find(int addr)
335 u8 val;
336 int ret;
338 cr_wdt_timeout = W83627HF_WDT_TIMEOUT;
339 cr_wdt_control = W83627HF_WDT_CONTROL;
340 cr_wdt_csr = W836X7HF_WDT_CSR;
342 ret = superio_enter();
343 if (ret)
344 return ret;
345 superio_select(W83627HF_LD_WDT);
346 val = superio_inb(0x20);
347 switch (val) {
348 case W83627HF_ID:
349 ret = w83627hf;
350 break;
351 case W83627S_ID:
352 ret = w83627s;
353 break;
354 case W83697HF_ID:
355 ret = w83697hf;
356 cr_wdt_timeout = W83697HF_WDT_TIMEOUT;
357 cr_wdt_control = W83697HF_WDT_CONTROL;
358 break;
359 case W83697UG_ID:
360 ret = w83697ug;
361 cr_wdt_timeout = W83697HF_WDT_TIMEOUT;
362 cr_wdt_control = W83697HF_WDT_CONTROL;
363 break;
364 case W83637HF_ID:
365 ret = w83637hf;
366 break;
367 case W83627THF_ID:
368 ret = w83627thf;
369 break;
370 case W83687THF_ID:
371 ret = w83687thf;
372 break;
373 case W83627EHF_ID:
374 ret = w83627ehf;
375 break;
376 case W83627DHG_ID:
377 ret = w83627dhg;
378 break;
379 case W83627DHG_P_ID:
380 ret = w83627dhg_p;
381 break;
382 case W83627UHG_ID:
383 ret = w83627uhg;
384 break;
385 case W83667HG_ID:
386 ret = w83667hg;
387 break;
388 case W83667HG_B_ID:
389 ret = w83667hg_b;
390 break;
391 case NCT6775_ID:
392 ret = nct6775;
393 break;
394 case NCT6776_ID:
395 ret = nct6776;
396 break;
397 case NCT6779_ID:
398 ret = nct6779;
399 break;
400 case NCT6791_ID:
401 ret = nct6791;
402 break;
403 case NCT6792_ID:
404 ret = nct6792;
405 break;
406 case NCT6793_ID:
407 ret = nct6793;
408 break;
409 case NCT6795_ID:
410 ret = nct6795;
411 break;
412 case NCT6796_ID:
413 ret = nct6796;
414 break;
415 case NCT6102_ID:
416 ret = nct6102;
417 cr_wdt_timeout = NCT6102D_WDT_TIMEOUT;
418 cr_wdt_control = NCT6102D_WDT_CONTROL;
419 cr_wdt_csr = NCT6102D_WDT_CSR;
420 break;
421 case 0xff:
422 ret = -ENODEV;
423 break;
424 default:
425 ret = -ENODEV;
426 pr_err("Unsupported chip ID: 0x%02x\n", val);
427 break;
429 superio_exit();
430 return ret;
433 static int __init wdt_init(void)
435 int ret;
436 int chip;
437 static const char * const chip_name[] = {
438 "W83627HF",
439 "W83627S",
440 "W83697HF",
441 "W83697UG",
442 "W83637HF",
443 "W83627THF",
444 "W83687THF",
445 "W83627EHF",
446 "W83627DHG",
447 "W83627UHG",
448 "W83667HG",
449 "W83667DHG-P",
450 "W83667HG-B",
451 "NCT6775",
452 "NCT6776",
453 "NCT6779",
454 "NCT6791",
455 "NCT6792",
456 "NCT6793",
457 "NCT6795",
458 "NCT6796",
459 "NCT6102",
462 wdt_io = 0x2e;
463 chip = wdt_find(0x2e);
464 if (chip < 0) {
465 wdt_io = 0x4e;
466 chip = wdt_find(0x4e);
467 if (chip < 0)
468 return chip;
471 pr_info("WDT driver for %s Super I/O chip initialising\n",
472 chip_name[chip]);
474 watchdog_init_timeout(&wdt_dev, timeout, NULL);
475 watchdog_set_nowayout(&wdt_dev, nowayout);
476 watchdog_stop_on_reboot(&wdt_dev);
478 ret = w83627hf_init(&wdt_dev, chip);
479 if (ret) {
480 pr_err("failed to initialize watchdog (err=%d)\n", ret);
481 return ret;
484 ret = watchdog_register_device(&wdt_dev);
485 if (ret)
486 return ret;
488 pr_info("initialized. timeout=%d sec (nowayout=%d)\n",
489 wdt_dev.timeout, nowayout);
491 return ret;
494 static void __exit wdt_exit(void)
496 watchdog_unregister_device(&wdt_dev);
499 module_init(wdt_init);
500 module_exit(wdt_exit);
502 MODULE_LICENSE("GPL");
503 MODULE_AUTHOR("Pádraig Brady <P@draigBrady.com>");
504 MODULE_DESCRIPTION("w83627hf/thf WDT driver");