[S390] kernel: Add z/VM LGR detection
[linux/fpc-iii.git] / arch / powerpc / sysdev / ppc4xx_cpm.c
blob82e2cfe35c62d4061c9a4bf94d40ce5e6313f150
1 /*
2 * PowerPC 4xx Clock and Power Management
4 * Copyright (C) 2010, Applied Micro Circuits Corporation
5 * Victor Gallardo (vgallardo@apm.com)
7 * Based on arch/powerpc/platforms/44x/idle.c:
8 * Jerone Young <jyoung5@us.ibm.com>
9 * Copyright 2008 IBM Corp.
11 * Based on arch/powerpc/sysdev/fsl_pmc.c:
12 * Anton Vorontsov <avorontsov@ru.mvista.com>
13 * Copyright 2009 MontaVista Software, Inc.
15 * See file CREDITS for list of people who contributed to this
16 * project.
18 * This program is free software; you can redistribute it and/or
19 * modify it under the terms of the GNU General Public License as
20 * published by the Free Software Foundation; either version 2 of
21 * the License, or (at your option) any later version.
23 * This program is distributed in the hope that it will be useful,
24 * but WITHOUT ANY WARRANTY; without even the implied warranty of
25 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
26 * GNU General Public License for more details.
28 * You should have received a copy of the GNU General Public License
29 * along with this program; if not, write to the Free Software
30 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
31 * MA 02111-1307 USA
34 #include <linux/kernel.h>
35 #include <linux/of_platform.h>
36 #include <linux/sysfs.h>
37 #include <linux/cpu.h>
38 #include <linux/suspend.h>
39 #include <asm/dcr.h>
40 #include <asm/dcr-native.h>
41 #include <asm/machdep.h>
43 #define CPM_ER 0
44 #define CPM_FR 1
45 #define CPM_SR 2
47 #define CPM_IDLE_WAIT 0
48 #define CPM_IDLE_DOZE 1
50 struct cpm {
51 dcr_host_t dcr_host;
52 unsigned int dcr_offset[3];
53 unsigned int powersave_off;
54 unsigned int unused;
55 unsigned int idle_doze;
56 unsigned int standby;
57 unsigned int suspend;
60 static struct cpm cpm;
62 struct cpm_idle_mode {
63 unsigned int enabled;
64 const char *name;
67 static struct cpm_idle_mode idle_mode[] = {
68 [CPM_IDLE_WAIT] = { 1, "wait" }, /* default */
69 [CPM_IDLE_DOZE] = { 0, "doze" },
72 static unsigned int cpm_set(unsigned int cpm_reg, unsigned int mask)
74 unsigned int value;
76 /* CPM controller supports 3 different types of sleep interface
77 * known as class 1, 2 and 3. For class 1 units, they are
78 * unconditionally put to sleep when the corresponding CPM bit is
79 * set. For class 2 and 3 units this is not case; if they can be
80 * put to to sleep, they will. Here we do not verify, we just
81 * set them and expect them to eventually go off when they can.
83 value = dcr_read(cpm.dcr_host, cpm.dcr_offset[cpm_reg]);
84 dcr_write(cpm.dcr_host, cpm.dcr_offset[cpm_reg], value | mask);
86 /* return old state, to restore later if needed */
87 return value;
90 static void cpm_idle_wait(void)
92 unsigned long msr_save;
94 /* save off initial state */
95 msr_save = mfmsr();
96 /* sync required when CPM0_ER[CPU] is set */
97 mb();
98 /* set wait state MSR */
99 mtmsr(msr_save|MSR_WE|MSR_EE|MSR_CE|MSR_DE);
100 isync();
101 /* return to initial state */
102 mtmsr(msr_save);
103 isync();
106 static void cpm_idle_sleep(unsigned int mask)
108 unsigned int er_save;
110 /* update CPM_ER state */
111 er_save = cpm_set(CPM_ER, mask);
113 /* go to wait state so that CPM0_ER[CPU] can take effect */
114 cpm_idle_wait();
116 /* restore CPM_ER state */
117 dcr_write(cpm.dcr_host, cpm.dcr_offset[CPM_ER], er_save);
120 static void cpm_idle_doze(void)
122 cpm_idle_sleep(cpm.idle_doze);
125 static void cpm_idle_config(int mode)
127 int i;
129 if (idle_mode[mode].enabled)
130 return;
132 for (i = 0; i < ARRAY_SIZE(idle_mode); i++)
133 idle_mode[i].enabled = 0;
135 idle_mode[mode].enabled = 1;
138 static ssize_t cpm_idle_show(struct kobject *kobj,
139 struct kobj_attribute *attr, char *buf)
141 char *s = buf;
142 int i;
144 for (i = 0; i < ARRAY_SIZE(idle_mode); i++) {
145 if (idle_mode[i].enabled)
146 s += sprintf(s, "[%s] ", idle_mode[i].name);
147 else
148 s += sprintf(s, "%s ", idle_mode[i].name);
151 *(s-1) = '\n'; /* convert the last space to a newline */
153 return s - buf;
156 static ssize_t cpm_idle_store(struct kobject *kobj,
157 struct kobj_attribute *attr,
158 const char *buf, size_t n)
160 int i;
161 char *p;
162 int len;
164 p = memchr(buf, '\n', n);
165 len = p ? p - buf : n;
167 for (i = 0; i < ARRAY_SIZE(idle_mode); i++) {
168 if (strncmp(buf, idle_mode[i].name, len) == 0) {
169 cpm_idle_config(i);
170 return n;
174 return -EINVAL;
177 static struct kobj_attribute cpm_idle_attr =
178 __ATTR(idle, 0644, cpm_idle_show, cpm_idle_store);
180 static void cpm_idle_config_sysfs(void)
182 struct device *dev;
183 unsigned long ret;
185 dev = get_cpu_device(0);
187 ret = sysfs_create_file(&dev->kobj,
188 &cpm_idle_attr.attr);
189 if (ret)
190 printk(KERN_WARNING
191 "cpm: failed to create idle sysfs entry\n");
194 static void cpm_idle(void)
196 if (idle_mode[CPM_IDLE_DOZE].enabled)
197 cpm_idle_doze();
198 else
199 cpm_idle_wait();
202 static int cpm_suspend_valid(suspend_state_t state)
204 switch (state) {
205 case PM_SUSPEND_STANDBY:
206 return !!cpm.standby;
207 case PM_SUSPEND_MEM:
208 return !!cpm.suspend;
209 default:
210 return 0;
214 static void cpm_suspend_standby(unsigned int mask)
216 unsigned long tcr_save;
218 /* disable decrement interrupt */
219 tcr_save = mfspr(SPRN_TCR);
220 mtspr(SPRN_TCR, tcr_save & ~TCR_DIE);
222 /* go to sleep state */
223 cpm_idle_sleep(mask);
225 /* restore decrement interrupt */
226 mtspr(SPRN_TCR, tcr_save);
229 static int cpm_suspend_enter(suspend_state_t state)
231 switch (state) {
232 case PM_SUSPEND_STANDBY:
233 cpm_suspend_standby(cpm.standby);
234 break;
235 case PM_SUSPEND_MEM:
236 cpm_suspend_standby(cpm.suspend);
237 break;
240 return 0;
243 static struct platform_suspend_ops cpm_suspend_ops = {
244 .valid = cpm_suspend_valid,
245 .enter = cpm_suspend_enter,
248 static int cpm_get_uint_property(struct device_node *np,
249 const char *name)
251 int len;
252 const unsigned int *prop = of_get_property(np, name, &len);
254 if (prop == NULL || len < sizeof(u32))
255 return 0;
257 return *prop;
260 static int __init cpm_init(void)
262 struct device_node *np;
263 int dcr_base, dcr_len;
264 int ret = 0;
266 if (!cpm.powersave_off) {
267 cpm_idle_config(CPM_IDLE_WAIT);
268 ppc_md.power_save = &cpm_idle;
271 np = of_find_compatible_node(NULL, NULL, "ibm,cpm");
272 if (!np) {
273 ret = -EINVAL;
274 goto out;
277 dcr_base = dcr_resource_start(np, 0);
278 dcr_len = dcr_resource_len(np, 0);
280 if (dcr_base == 0 || dcr_len == 0) {
281 printk(KERN_ERR "cpm: could not parse dcr property for %s\n",
282 np->full_name);
283 ret = -EINVAL;
284 goto out;
287 cpm.dcr_host = dcr_map(np, dcr_base, dcr_len);
289 if (!DCR_MAP_OK(cpm.dcr_host)) {
290 printk(KERN_ERR "cpm: failed to map dcr property for %s\n",
291 np->full_name);
292 ret = -EINVAL;
293 goto out;
296 /* All 4xx SoCs with a CPM controller have one of two
297 * different order for the CPM registers. Some have the
298 * CPM registers in the following order (ER,FR,SR). The
299 * others have them in the following order (SR,ER,FR).
302 if (cpm_get_uint_property(np, "er-offset") == 0) {
303 cpm.dcr_offset[CPM_ER] = 0;
304 cpm.dcr_offset[CPM_FR] = 1;
305 cpm.dcr_offset[CPM_SR] = 2;
306 } else {
307 cpm.dcr_offset[CPM_ER] = 1;
308 cpm.dcr_offset[CPM_FR] = 2;
309 cpm.dcr_offset[CPM_SR] = 0;
312 /* Now let's see what IPs to turn off for the following modes */
314 cpm.unused = cpm_get_uint_property(np, "unused-units");
315 cpm.idle_doze = cpm_get_uint_property(np, "idle-doze");
316 cpm.standby = cpm_get_uint_property(np, "standby");
317 cpm.suspend = cpm_get_uint_property(np, "suspend");
319 /* If some IPs are unused let's turn them off now */
321 if (cpm.unused) {
322 cpm_set(CPM_ER, cpm.unused);
323 cpm_set(CPM_FR, cpm.unused);
326 /* Now let's export interfaces */
328 if (!cpm.powersave_off && cpm.idle_doze)
329 cpm_idle_config_sysfs();
331 if (cpm.standby || cpm.suspend)
332 suspend_set_ops(&cpm_suspend_ops);
333 out:
334 if (np)
335 of_node_put(np);
336 return ret;
339 late_initcall(cpm_init);
341 static int __init cpm_powersave_off(char *arg)
343 cpm.powersave_off = 1;
344 return 0;
346 __setup("powersave=off", cpm_powersave_off);