tty/serial: Add support for Altera serial port
[linux/fpc-iii.git] / include / scsi / scsi_device.h
blob5591ed54dc93ad67650c1dad43d0aae9b9b60b25
1 #ifndef _SCSI_SCSI_DEVICE_H
2 #define _SCSI_SCSI_DEVICE_H
4 #include <linux/device.h>
5 #include <linux/list.h>
6 #include <linux/spinlock.h>
7 #include <linux/workqueue.h>
8 #include <linux/blkdev.h>
9 #include <scsi/scsi.h>
10 #include <linux/atomic.h>
12 struct request_queue;
13 struct scsi_cmnd;
14 struct scsi_lun;
15 struct scsi_sense_hdr;
17 struct scsi_mode_data {
18 __u32 length;
19 __u16 block_descriptor_length;
20 __u8 medium_type;
21 __u8 device_specific;
22 __u8 header_length;
23 __u8 longlba:1;
27 * sdev state: If you alter this, you also need to alter scsi_sysfs.c
28 * (for the ascii descriptions) and the state model enforcer:
29 * scsi_lib:scsi_device_set_state().
31 enum scsi_device_state {
32 SDEV_CREATED = 1, /* device created but not added to sysfs
33 * Only internal commands allowed (for inq) */
34 SDEV_RUNNING, /* device properly configured
35 * All commands allowed */
36 SDEV_CANCEL, /* beginning to delete device
37 * Only error handler commands allowed */
38 SDEV_DEL, /* device deleted
39 * no commands allowed */
40 SDEV_QUIESCE, /* Device quiescent. No block commands
41 * will be accepted, only specials (which
42 * originate in the mid-layer) */
43 SDEV_OFFLINE, /* Device offlined (by error handling or
44 * user request */
45 SDEV_BLOCK, /* Device blocked by scsi lld. No
46 * scsi commands from user or midlayer
47 * should be issued to the scsi
48 * lld. */
49 SDEV_CREATED_BLOCK, /* same as above but for created devices */
52 enum scsi_device_event {
53 SDEV_EVT_MEDIA_CHANGE = 1, /* media has changed */
55 SDEV_EVT_LAST = SDEV_EVT_MEDIA_CHANGE,
56 SDEV_EVT_MAXBITS = SDEV_EVT_LAST + 1
59 struct scsi_event {
60 enum scsi_device_event evt_type;
61 struct list_head node;
63 /* put union of data structures, for non-simple event types,
64 * here
68 struct scsi_device {
69 struct Scsi_Host *host;
70 struct request_queue *request_queue;
72 /* the next two are protected by the host->host_lock */
73 struct list_head siblings; /* list of all devices on this host */
74 struct list_head same_target_siblings; /* just the devices sharing same target id */
76 /* this is now protected by the request_queue->queue_lock */
77 unsigned int device_busy; /* commands actually active on
78 * low-level. protected by queue_lock. */
79 spinlock_t list_lock;
80 struct list_head cmd_list; /* queue of in use SCSI Command structures */
81 struct list_head starved_entry;
82 struct scsi_cmnd *current_cmnd; /* currently active command */
83 unsigned short queue_depth; /* How deep of a queue we want */
84 unsigned short max_queue_depth; /* max queue depth */
85 unsigned short last_queue_full_depth; /* These two are used by */
86 unsigned short last_queue_full_count; /* scsi_track_queue_full() */
87 unsigned long last_queue_full_time; /* last queue full time */
88 unsigned long queue_ramp_up_period; /* ramp up period in jiffies */
89 #define SCSI_DEFAULT_RAMP_UP_PERIOD (120 * HZ)
91 unsigned long last_queue_ramp_up; /* last queue ramp up time */
93 unsigned int id, lun, channel;
95 unsigned int manufacturer; /* Manufacturer of device, for using
96 * vendor-specific cmd's */
97 unsigned sector_size; /* size in bytes */
99 void *hostdata; /* available to low-level driver */
100 char type;
101 char scsi_level;
102 char inq_periph_qual; /* PQ from INQUIRY data */
103 unsigned char inquiry_len; /* valid bytes in 'inquiry' */
104 unsigned char * inquiry; /* INQUIRY response data */
105 const char * vendor; /* [back_compat] point into 'inquiry' ... */
106 const char * model; /* ... after scan; point to static string */
107 const char * rev; /* ... "nullnullnullnull" before scan */
108 unsigned char current_tag; /* current tag */
109 struct scsi_target *sdev_target; /* used only for single_lun */
111 unsigned int sdev_bflags; /* black/white flags as also found in
112 * scsi_devinfo.[hc]. For now used only to
113 * pass settings from slave_alloc to scsi
114 * core. */
115 unsigned writeable:1;
116 unsigned removable:1;
117 unsigned changed:1; /* Data invalid due to media change */
118 unsigned busy:1; /* Used to prevent races */
119 unsigned lockable:1; /* Able to prevent media removal */
120 unsigned locked:1; /* Media removal disabled */
121 unsigned borken:1; /* Tell the Seagate driver to be
122 * painfully slow on this device */
123 unsigned disconnect:1; /* can disconnect */
124 unsigned soft_reset:1; /* Uses soft reset option */
125 unsigned sdtr:1; /* Device supports SDTR messages */
126 unsigned wdtr:1; /* Device supports WDTR messages */
127 unsigned ppr:1; /* Device supports PPR messages */
128 unsigned tagged_supported:1; /* Supports SCSI-II tagged queuing */
129 unsigned simple_tags:1; /* simple queue tag messages are enabled */
130 unsigned ordered_tags:1;/* ordered queue tag messages are enabled */
131 unsigned was_reset:1; /* There was a bus reset on the bus for
132 * this device */
133 unsigned expecting_cc_ua:1; /* Expecting a CHECK_CONDITION/UNIT_ATTN
134 * because we did a bus reset. */
135 unsigned use_10_for_rw:1; /* first try 10-byte read / write */
136 unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */
137 unsigned skip_ms_page_8:1; /* do not use MODE SENSE page 0x08 */
138 unsigned skip_ms_page_3f:1; /* do not use MODE SENSE page 0x3f */
139 unsigned use_192_bytes_for_3f:1; /* ask for 192 bytes from page 0x3f */
140 unsigned no_start_on_add:1; /* do not issue start on add */
141 unsigned allow_restart:1; /* issue START_UNIT in error handler */
142 unsigned manage_start_stop:1; /* Let HLD (sd) manage start/stop */
143 unsigned start_stop_pwr_cond:1; /* Set power cond. in START_STOP_UNIT */
144 unsigned no_uld_attach:1; /* disable connecting to upper level drivers */
145 unsigned select_no_atn:1;
146 unsigned fix_capacity:1; /* READ_CAPACITY is too high by 1 */
147 unsigned guess_capacity:1; /* READ_CAPACITY might be too high by 1 */
148 unsigned retry_hwerror:1; /* Retry HARDWARE_ERROR */
149 unsigned last_sector_bug:1; /* do not use multisector accesses on
150 SD_LAST_BUGGY_SECTORS */
151 unsigned no_read_disc_info:1; /* Avoid READ_DISC_INFO cmds */
152 unsigned no_read_capacity_16:1; /* Avoid READ_CAPACITY_16 cmds */
153 unsigned is_visible:1; /* is the device visible in sysfs */
155 DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */
156 struct list_head event_list; /* asserted events */
157 struct work_struct event_work;
159 unsigned int device_blocked; /* Device returned QUEUE_FULL. */
161 unsigned int max_device_blocked; /* what device_blocked counts down from */
162 #define SCSI_DEFAULT_DEVICE_BLOCKED 3
164 atomic_t iorequest_cnt;
165 atomic_t iodone_cnt;
166 atomic_t ioerr_cnt;
168 struct device sdev_gendev,
169 sdev_dev;
171 struct execute_work ew; /* used to get process context on put */
172 struct work_struct requeue_work;
174 struct scsi_dh_data *scsi_dh_data;
175 enum scsi_device_state sdev_state;
176 unsigned long sdev_data[0];
177 } __attribute__((aligned(sizeof(unsigned long))));
179 struct scsi_dh_devlist {
180 char *vendor;
181 char *model;
184 typedef void (*activate_complete)(void *, int);
185 struct scsi_device_handler {
186 /* Used by the infrastructure */
187 struct list_head list; /* list of scsi_device_handlers */
188 int idx;
190 /* Filled by the hardware handler */
191 struct module *module;
192 const char *name;
193 const struct scsi_dh_devlist *devlist;
194 int (*check_sense)(struct scsi_device *, struct scsi_sense_hdr *);
195 int (*attach)(struct scsi_device *);
196 void (*detach)(struct scsi_device *);
197 int (*activate)(struct scsi_device *, activate_complete, void *);
198 int (*prep_fn)(struct scsi_device *, struct request *);
199 int (*set_params)(struct scsi_device *, const char *);
200 bool (*match)(struct scsi_device *);
203 struct scsi_dh_data {
204 struct scsi_device_handler *scsi_dh;
205 struct scsi_device *sdev;
206 struct kref kref;
207 char buf[0];
210 #define to_scsi_device(d) \
211 container_of(d, struct scsi_device, sdev_gendev)
212 #define class_to_sdev(d) \
213 container_of(d, struct scsi_device, sdev_dev)
214 #define transport_class_to_sdev(class_dev) \
215 to_scsi_device(class_dev->parent)
217 #define sdev_printk(prefix, sdev, fmt, a...) \
218 dev_printk(prefix, &(sdev)->sdev_gendev, fmt, ##a)
220 #define scmd_printk(prefix, scmd, fmt, a...) \
221 (scmd)->request->rq_disk ? \
222 sdev_printk(prefix, (scmd)->device, "[%s] " fmt, \
223 (scmd)->request->rq_disk->disk_name, ##a) : \
224 sdev_printk(prefix, (scmd)->device, fmt, ##a)
226 enum scsi_target_state {
227 STARGET_CREATED = 1,
228 STARGET_RUNNING,
229 STARGET_DEL,
233 * scsi_target: representation of a scsi target, for now, this is only
234 * used for single_lun devices. If no one has active IO to the target,
235 * starget_sdev_user is NULL, else it points to the active sdev.
237 struct scsi_target {
238 struct scsi_device *starget_sdev_user;
239 struct list_head siblings;
240 struct list_head devices;
241 struct device dev;
242 unsigned int reap_ref; /* protected by the host lock */
243 unsigned int channel;
244 unsigned int id; /* target id ... replace
245 * scsi_device.id eventually */
246 unsigned int create:1; /* signal that it needs to be added */
247 unsigned int single_lun:1; /* Indicates we should only
248 * allow I/O to one of the luns
249 * for the device at a time. */
250 unsigned int pdt_1f_for_no_lun; /* PDT = 0x1f */
251 /* means no lun present */
252 /* commands actually active on LLD. protected by host lock. */
253 unsigned int target_busy;
255 * LLDs should set this in the slave_alloc host template callout.
256 * If set to zero then there is not limit.
258 unsigned int can_queue;
259 unsigned int target_blocked;
260 unsigned int max_target_blocked;
261 #define SCSI_DEFAULT_TARGET_BLOCKED 3
263 char scsi_level;
264 struct execute_work ew;
265 enum scsi_target_state state;
266 void *hostdata; /* available to low-level driver */
267 unsigned long starget_data[0]; /* for the transport */
268 /* starget_data must be the last element!!!! */
269 } __attribute__((aligned(sizeof(unsigned long))));
271 #define to_scsi_target(d) container_of(d, struct scsi_target, dev)
272 static inline struct scsi_target *scsi_target(struct scsi_device *sdev)
274 return to_scsi_target(sdev->sdev_gendev.parent);
276 #define transport_class_to_starget(class_dev) \
277 to_scsi_target(class_dev->parent)
279 #define starget_printk(prefix, starget, fmt, a...) \
280 dev_printk(prefix, &(starget)->dev, fmt, ##a)
282 extern struct scsi_device *__scsi_add_device(struct Scsi_Host *,
283 uint, uint, uint, void *hostdata);
284 extern int scsi_add_device(struct Scsi_Host *host, uint channel,
285 uint target, uint lun);
286 extern int scsi_register_device_handler(struct scsi_device_handler *scsi_dh);
287 extern void scsi_remove_device(struct scsi_device *);
288 extern int scsi_unregister_device_handler(struct scsi_device_handler *scsi_dh);
290 extern int scsi_device_get(struct scsi_device *);
291 extern void scsi_device_put(struct scsi_device *);
292 extern struct scsi_device *scsi_device_lookup(struct Scsi_Host *,
293 uint, uint, uint);
294 extern struct scsi_device *__scsi_device_lookup(struct Scsi_Host *,
295 uint, uint, uint);
296 extern struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *,
297 uint);
298 extern struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *,
299 uint);
300 extern void starget_for_each_device(struct scsi_target *, void *,
301 void (*fn)(struct scsi_device *, void *));
302 extern void __starget_for_each_device(struct scsi_target *, void *,
303 void (*fn)(struct scsi_device *,
304 void *));
306 /* only exposed to implement shost_for_each_device */
307 extern struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *,
308 struct scsi_device *);
311 * shost_for_each_device - iterate over all devices of a host
312 * @sdev: the &struct scsi_device to use as a cursor
313 * @shost: the &struct scsi_host to iterate over
315 * Iterator that returns each device attached to @shost. This loop
316 * takes a reference on each device and releases it at the end. If
317 * you break out of the loop, you must call scsi_device_put(sdev).
319 #define shost_for_each_device(sdev, shost) \
320 for ((sdev) = __scsi_iterate_devices((shost), NULL); \
321 (sdev); \
322 (sdev) = __scsi_iterate_devices((shost), (sdev)))
325 * __shost_for_each_device - iterate over all devices of a host (UNLOCKED)
326 * @sdev: the &struct scsi_device to use as a cursor
327 * @shost: the &struct scsi_host to iterate over
329 * Iterator that returns each device attached to @shost. It does _not_
330 * take a reference on the scsi_device, so the whole loop must be
331 * protected by shost->host_lock.
333 * Note: The only reason to use this is because you need to access the
334 * device list in interrupt context. Otherwise you really want to use
335 * shost_for_each_device instead.
337 #define __shost_for_each_device(sdev, shost) \
338 list_for_each_entry((sdev), &((shost)->__devices), siblings)
340 extern void scsi_adjust_queue_depth(struct scsi_device *, int, int);
341 extern int scsi_track_queue_full(struct scsi_device *, int);
343 extern int scsi_set_medium_removal(struct scsi_device *, char);
345 extern int scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
346 unsigned char *buffer, int len, int timeout,
347 int retries, struct scsi_mode_data *data,
348 struct scsi_sense_hdr *);
349 extern int scsi_mode_select(struct scsi_device *sdev, int pf, int sp,
350 int modepage, unsigned char *buffer, int len,
351 int timeout, int retries,
352 struct scsi_mode_data *data,
353 struct scsi_sense_hdr *);
354 extern int scsi_test_unit_ready(struct scsi_device *sdev, int timeout,
355 int retries, struct scsi_sense_hdr *sshdr);
356 extern int scsi_get_vpd_page(struct scsi_device *, u8 page, unsigned char *buf,
357 int buf_len);
358 extern int scsi_device_set_state(struct scsi_device *sdev,
359 enum scsi_device_state state);
360 extern struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type,
361 gfp_t gfpflags);
362 extern void sdev_evt_send(struct scsi_device *sdev, struct scsi_event *evt);
363 extern void sdev_evt_send_simple(struct scsi_device *sdev,
364 enum scsi_device_event evt_type, gfp_t gfpflags);
365 extern int scsi_device_quiesce(struct scsi_device *sdev);
366 extern void scsi_device_resume(struct scsi_device *sdev);
367 extern void scsi_target_quiesce(struct scsi_target *);
368 extern void scsi_target_resume(struct scsi_target *);
369 extern void scsi_scan_target(struct device *parent, unsigned int channel,
370 unsigned int id, unsigned int lun, int rescan);
371 extern void scsi_target_reap(struct scsi_target *);
372 extern void scsi_target_block(struct device *);
373 extern void scsi_target_unblock(struct device *);
374 extern void scsi_remove_target(struct device *);
375 extern void int_to_scsilun(unsigned int, struct scsi_lun *);
376 extern int scsilun_to_int(struct scsi_lun *);
377 extern const char *scsi_device_state_name(enum scsi_device_state);
378 extern int scsi_is_sdev_device(const struct device *);
379 extern int scsi_is_target_device(const struct device *);
380 extern int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd,
381 int data_direction, void *buffer, unsigned bufflen,
382 unsigned char *sense, int timeout, int retries,
383 int flag, int *resid);
384 extern int scsi_execute_req(struct scsi_device *sdev, const unsigned char *cmd,
385 int data_direction, void *buffer, unsigned bufflen,
386 struct scsi_sense_hdr *, int timeout, int retries,
387 int *resid);
389 #ifdef CONFIG_PM_RUNTIME
390 extern int scsi_autopm_get_device(struct scsi_device *);
391 extern void scsi_autopm_put_device(struct scsi_device *);
392 #else
393 static inline int scsi_autopm_get_device(struct scsi_device *d) { return 0; }
394 static inline void scsi_autopm_put_device(struct scsi_device *d) {}
395 #endif /* CONFIG_PM_RUNTIME */
397 static inline int __must_check scsi_device_reprobe(struct scsi_device *sdev)
399 return device_reprobe(&sdev->sdev_gendev);
402 static inline unsigned int sdev_channel(struct scsi_device *sdev)
404 return sdev->channel;
407 static inline unsigned int sdev_id(struct scsi_device *sdev)
409 return sdev->id;
412 #define scmd_id(scmd) sdev_id((scmd)->device)
413 #define scmd_channel(scmd) sdev_channel((scmd)->device)
416 * checks for positions of the SCSI state machine
418 static inline int scsi_device_online(struct scsi_device *sdev)
420 return (sdev->sdev_state != SDEV_OFFLINE &&
421 sdev->sdev_state != SDEV_DEL);
423 static inline int scsi_device_blocked(struct scsi_device *sdev)
425 return sdev->sdev_state == SDEV_BLOCK ||
426 sdev->sdev_state == SDEV_CREATED_BLOCK;
428 static inline int scsi_device_created(struct scsi_device *sdev)
430 return sdev->sdev_state == SDEV_CREATED ||
431 sdev->sdev_state == SDEV_CREATED_BLOCK;
434 /* accessor functions for the SCSI parameters */
435 static inline int scsi_device_sync(struct scsi_device *sdev)
437 return sdev->sdtr;
439 static inline int scsi_device_wide(struct scsi_device *sdev)
441 return sdev->wdtr;
443 static inline int scsi_device_dt(struct scsi_device *sdev)
445 return sdev->ppr;
447 static inline int scsi_device_dt_only(struct scsi_device *sdev)
449 if (sdev->inquiry_len < 57)
450 return 0;
451 return (sdev->inquiry[56] & 0x0c) == 0x04;
453 static inline int scsi_device_ius(struct scsi_device *sdev)
455 if (sdev->inquiry_len < 57)
456 return 0;
457 return sdev->inquiry[56] & 0x01;
459 static inline int scsi_device_qas(struct scsi_device *sdev)
461 if (sdev->inquiry_len < 57)
462 return 0;
463 return sdev->inquiry[56] & 0x02;
465 static inline int scsi_device_enclosure(struct scsi_device *sdev)
467 return sdev->inquiry ? (sdev->inquiry[6] & (1<<6)) : 1;
470 static inline int scsi_device_protection(struct scsi_device *sdev)
472 return sdev->scsi_level > SCSI_2 && sdev->inquiry[5] & (1<<0);
475 static inline int scsi_device_tpgs(struct scsi_device *sdev)
477 return sdev->inquiry ? (sdev->inquiry[5] >> 4) & 0x3 : 0;
480 #define MODULE_ALIAS_SCSI_DEVICE(type) \
481 MODULE_ALIAS("scsi:t-" __stringify(type) "*")
482 #define SCSI_DEVICE_MODALIAS_FMT "scsi:t-0x%02x"
484 #endif /* _SCSI_SCSI_DEVICE_H */