arch/arm/mach-pxa/h5000.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Hardware definitions for HP iPAQ h5xxx Handheld Computers
   4  *
   5  * Copyright 2000-2003  Hewlett-Packard Company.
   6  * Copyright 2002       Jamey Hicks <jamey.hicks@hp.com>
   7  * Copyright 2004-2005  Phil Blundell <pb@handhelds.org>
   8  * Copyright 2007-2008  Anton Vorontsov <cbouatmailru@gmail.com>
   9  *
  10  * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
  11  * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
  12  * FITNESS FOR ANY PARTICULAR PURPOSE.
  13  *
  14  * Author: Jamey Hicks.
  15  */
  16
  17 #include <linux/kernel.h>
  18 #include <linux/init.h>
  19 #include <linux/platform_device.h>
  20 #include <linux/mtd/mtd.h>
  21 #include <linux/mtd/partitions.h>
  22 #include <linux/mtd/physmap.h>
  23
  24 #include <asm/mach-types.h>
  25 #include <asm/mach/arch.h>
  26 #include <asm/mach/map.h>
  27 #include <asm/irq.h>
  28
  29 #include "pxa25x.h"
  30 #include "h5000.h"
  31 #include "udc.h"
  32 #include <mach/smemc.h>
  33
  34 #include "generic.h"
  35
  36 /*
  37  * Flash
  38  */
  39
  40 static struct mtd_partition h5000_flash0_partitions[] = {
  41         {
  42                 .name = "bootldr",
  43                 .size = 0x00040000,
  44                 .offset = 0,
  45                 .mask_flags = MTD_WRITEABLE,
  46         },
  47         {
  48                 .name = "root",
  49                 .size = MTDPART_SIZ_FULL,
  50                 .offset = MTDPART_OFS_APPEND,
  51         },
  52 };
  53
  54 static struct mtd_partition h5000_flash1_partitions[] = {
  55         {
  56                 .name = "second root",
  57                 .size = SZ_16M - 0x00040000,
  58                 .offset = 0,
  59         },
  60         {
  61                 .name = "asset",
  62                 .size = MTDPART_SIZ_FULL,
  63                 .offset = MTDPART_OFS_APPEND,
  64                 .mask_flags = MTD_WRITEABLE,
  65         },
  66 };
  67
  68 static struct physmap_flash_data h5000_flash0_data = {
  69         .width = 4,
  70         .parts = h5000_flash0_partitions,
  71         .nr_parts = ARRAY_SIZE(h5000_flash0_partitions),
  72 };
  73
  74 static struct physmap_flash_data h5000_flash1_data = {
  75         .width = 4,
  76         .parts = h5000_flash1_partitions,
  77         .nr_parts = ARRAY_SIZE(h5000_flash1_partitions),
  78 };
  79
  80 static struct resource h5000_flash0_resources = {
  81         .start = PXA_CS0_PHYS,
  82         .end = PXA_CS0_PHYS + SZ_32M - 1,
  83         .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
  84 };
  85
  86 static struct resource h5000_flash1_resources = {
  87         .start = PXA_CS0_PHYS + SZ_32M,
  88         .end = PXA_CS0_PHYS + SZ_32M + SZ_16M - 1,
  89         .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
  90 };
  91
  92 static struct platform_device h5000_flash[] = {
  93         {
  94                 .name = "physmap-flash",
  95                 .id = 0,
  96                 .resource = &h5000_flash0_resources,
  97                 .num_resources = 1,
  98                 .dev = {
  99                         .platform_data = &h5000_flash0_data,
 100                 },
 101         },
 102         {
 103                 .name = "physmap-flash",
 104                 .id = 1,
 105                 .resource = &h5000_flash1_resources,
 106                 .num_resources = 1,
 107                 .dev = {
 108                         .platform_data = &h5000_flash1_data,
 109                 },
 110         },
 111 };
 112
 113 /*
 114  * USB Device Controller
 115  */
 116
 117 static struct pxa2xx_udc_mach_info h5000_udc_mach_info __initdata = {
 118         .gpio_pullup = H5000_GPIO_USB_PULLUP,
 119 };
 120
 121 /*
 122  * GPIO setup
 123  */
 124
 125 static unsigned long h5000_pin_config[] __initdata = {
 126         /* Crystal and Clock Signals */
 127         GPIO12_32KHz,
 128
 129         /* SDRAM and Static Memory I/O Signals */
 130         GPIO15_nCS_1,
 131         GPIO78_nCS_2,
 132         GPIO79_nCS_3,
 133         GPIO80_nCS_4,
 134
 135         /* FFUART */
 136         GPIO34_FFUART_RXD,
 137         GPIO35_FFUART_CTS,
 138         GPIO36_FFUART_DCD,
 139         GPIO37_FFUART_DSR,
 140         GPIO38_FFUART_RI,
 141         GPIO39_FFUART_TXD,
 142         GPIO40_FFUART_DTR,
 143         GPIO41_FFUART_RTS,
 144
 145         /* BTUART */
 146         GPIO42_BTUART_RXD,
 147         GPIO43_BTUART_TXD,
 148         GPIO44_BTUART_CTS,
 149         GPIO45_BTUART_RTS,
 150
 151         /* SSP1 */
 152         GPIO23_SSP1_SCLK,
 153         GPIO25_SSP1_TXD,
 154         GPIO26_SSP1_RXD,
 155
 156         /* I2S */
 157         GPIO28_I2S_BITCLK_OUT,
 158         GPIO29_I2S_SDATA_IN,
 159         GPIO30_I2S_SDATA_OUT,
 160         GPIO31_I2S_SYNC,
 161         GPIO32_I2S_SYSCLK,
 162 };
 163
 164 /*
 165  * Localbus setup:
 166  * CS0: Flash;
 167  * CS1: MediaQ chip, select 16-bit bus and vlio;
 168  * CS5: SAMCOP.
 169  */
 170
 171 static void fix_msc(void)
 172 {
 173         __raw_writel(0x129c24f2, MSC0);
 174         __raw_writel(0x7ff424fa, MSC1);
 175         __raw_writel(0x7ff47ff4, MSC2);
 176
 177         __raw_writel(__raw_readl(MDREFR) | 0x02080000, MDREFR);
 178 }
 179
 180 /*
 181  * Platform devices
 182  */
 183
 184 static struct platform_device *devices[] __initdata = {
 185         &h5000_flash[0],
 186         &h5000_flash[1],
 187 };
 188
 189 static void __init h5000_init(void)
 190 {
 191         fix_msc();
 192
 193         pxa2xx_mfp_config(ARRAY_AND_SIZE(h5000_pin_config));
 194         pxa_set_ffuart_info(NULL);
 195         pxa_set_btuart_info(NULL);
 196         pxa_set_stuart_info(NULL);
 197         pxa_set_udc_info(&h5000_udc_mach_info);
 198         platform_add_devices(ARRAY_AND_SIZE(devices));
 199 }
 200
 201 MACHINE_START(H5400, "HP iPAQ H5000")
 202         .atag_offset = 0x100,
 203         .map_io = pxa25x_map_io,
 204         .nr_irqs = PXA_NR_IRQS,
 205         .init_irq = pxa25x_init_irq,
 206         .handle_irq = pxa25x_handle_irq,
 207         .init_time      = pxa_timer_init,
 208         .init_machine = h5000_init,
 209         .restart        = pxa_restart,
 210 MACHINE_END