Merge tag 'sched-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel...
[linux/fpc-iii.git] / arch / arm / mach-zx / platsmp.c
blobd4e1d379222482d039fef83d9d6b6a396ca8a0fa
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright 2014 Linaro Ltd.
4 * Copyright (C) 2014 ZTE Corporation.
5 */
7 #include <linux/delay.h>
8 #include <linux/errno.h>
9 #include <linux/init.h>
10 #include <linux/io.h>
11 #include <linux/jiffies.h>
12 #include <linux/of.h>
13 #include <linux/of_address.h>
14 #include <linux/smp.h>
16 #include <asm/cacheflush.h>
17 #include <asm/cp15.h>
18 #include <asm/fncpy.h>
19 #include <asm/proc-fns.h>
20 #include <asm/smp_scu.h>
21 #include <asm/smp_plat.h>
23 #include "core.h"
25 #define AON_SYS_CTRL_RESERVED1 0xa8
27 #define BUS_MATRIX_REMAP_CONFIG 0x00
29 #define PCU_CPU0_CTRL 0x00
30 #define PCU_CPU1_CTRL 0x04
31 #define PCU_CPU1_ST 0x0c
32 #define PCU_GLOBAL_CTRL 0x14
33 #define PCU_EXPEND_CONTROL 0x34
35 #define ZX_IRAM_BASE 0x00200000
37 static void __iomem *pcu_base;
38 static void __iomem *matrix_base;
39 static void __iomem *scu_base;
41 void __init zx_smp_prepare_cpus(unsigned int max_cpus)
43 struct device_node *np;
44 unsigned long base = 0;
45 void __iomem *aonsysctrl_base;
46 void __iomem *sys_iram;
48 base = scu_a9_get_base();
49 scu_base = ioremap(base, SZ_256);
50 if (!scu_base) {
51 pr_err("%s: failed to map scu\n", __func__);
52 return;
55 scu_enable(scu_base);
57 np = of_find_compatible_node(NULL, NULL, "zte,sysctrl");
58 if (!np) {
59 pr_err("%s: failed to find sysctrl node\n", __func__);
60 return;
63 aonsysctrl_base = of_iomap(np, 0);
64 if (!aonsysctrl_base) {
65 pr_err("%s: failed to map aonsysctrl\n", __func__);
66 of_node_put(np);
67 return;
71 * Write the address of secondary startup into the
72 * system-wide flags register. The BootMonitor waits
73 * until it receives a soft interrupt, and then the
74 * secondary CPU branches to this address.
76 __raw_writel(__pa_symbol(zx_secondary_startup),
77 aonsysctrl_base + AON_SYS_CTRL_RESERVED1);
79 iounmap(aonsysctrl_base);
80 of_node_put(np);
82 np = of_find_compatible_node(NULL, NULL, "zte,zx296702-pcu");
83 pcu_base = of_iomap(np, 0);
84 of_node_put(np);
85 WARN_ON(!pcu_base);
87 np = of_find_compatible_node(NULL, NULL, "zte,zx-bus-matrix");
88 matrix_base = of_iomap(np, 0);
89 of_node_put(np);
90 WARN_ON(!matrix_base);
92 /* Map the first 4 KB IRAM for suspend usage */
93 sys_iram = __arm_ioremap_exec(ZX_IRAM_BASE, PAGE_SIZE, false);
94 zx_secondary_startup_pa = __pa_symbol(zx_secondary_startup);
95 fncpy(sys_iram, &zx_resume_jump, zx_suspend_iram_sz);
98 static int zx_boot_secondary(unsigned int cpu, struct task_struct *idle)
100 static bool first_boot = true;
102 if (first_boot) {
103 arch_send_wakeup_ipi_mask(cpumask_of(cpu));
104 first_boot = false;
105 return 0;
108 /* Swap the base address mapping between IRAM and IROM */
109 writel_relaxed(0x1, matrix_base + BUS_MATRIX_REMAP_CONFIG);
111 /* Power on CPU1 */
112 writel_relaxed(0x0, pcu_base + PCU_CPU1_CTRL);
114 /* Wait for power on ack */
115 while (readl_relaxed(pcu_base + PCU_CPU1_ST) & 0x4)
116 cpu_relax();
118 /* Swap back the mapping of IRAM and IROM */
119 writel_relaxed(0x0, matrix_base + BUS_MATRIX_REMAP_CONFIG);
121 return 0;
124 #ifdef CONFIG_HOTPLUG_CPU
125 static inline void cpu_enter_lowpower(void)
127 unsigned int v;
129 asm volatile(
130 "mcr p15, 0, %1, c7, c5, 0\n"
131 " mcr p15, 0, %1, c7, c10, 4\n"
133 * Turn off coherency
135 " mrc p15, 0, %0, c1, c0, 1\n"
136 " bic %0, %0, %3\n"
137 " mcr p15, 0, %0, c1, c0, 1\n"
138 " mrc p15, 0, %0, c1, c0, 0\n"
139 " bic %0, %0, %2\n"
140 " mcr p15, 0, %0, c1, c0, 0\n"
141 : "=&r" (v)
142 : "r" (0), "Ir" (CR_C), "Ir" (0x40)
143 : "cc");
146 static int zx_cpu_kill(unsigned int cpu)
148 unsigned long timeout = jiffies + msecs_to_jiffies(2000);
150 writel_relaxed(0x2, pcu_base + PCU_CPU1_CTRL);
152 while ((readl_relaxed(pcu_base + PCU_CPU1_ST) & 0x3) != 0x0) {
153 if (time_after(jiffies, timeout)) {
154 pr_err("*** cpu1 poweroff timeout\n");
155 break;
158 return 1;
161 static void zx_cpu_die(unsigned int cpu)
163 scu_power_mode(scu_base, SCU_PM_POWEROFF);
164 cpu_enter_lowpower();
166 while (1)
167 cpu_do_idle();
169 #endif
171 static void zx_secondary_init(unsigned int cpu)
173 scu_power_mode(scu_base, SCU_PM_NORMAL);
176 static const struct smp_operations zx_smp_ops __initconst = {
177 .smp_prepare_cpus = zx_smp_prepare_cpus,
178 .smp_secondary_init = zx_secondary_init,
179 .smp_boot_secondary = zx_boot_secondary,
180 #ifdef CONFIG_HOTPLUG_CPU
181 .cpu_kill = zx_cpu_kill,
182 .cpu_die = zx_cpu_die,
183 #endif
186 CPU_METHOD_OF_DECLARE(zx_smp, "zte,zx296702-smp", &zx_smp_ops);