1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * Functions for setting up and using a MPC106 northbridge
4 * Extracted from arch/powerpc/platforms/powermac/pci.c.
6 * Copyright (C) 2003 Benjamin Herrenschmuidt (benh@kernel.crashing.org)
7 * Copyright (C) 1997 Paul Mackerras (paulus@samba.org)
9 #include <linux/kernel.h>
10 #include <linux/pci.h>
11 #include <linux/init.h>
15 #include <asm/pci-bridge.h>
16 #include <asm/grackle.h>
18 #define GRACKLE_CFA(b, d, o) (0x80 | ((b) << 8) | ((d) << 16) \
21 #define GRACKLE_PICR1_STG 0x00000040
22 #define GRACKLE_PICR1_LOOPSNOOP 0x00000010
24 /* N.B. this is called before bridges is initialized, so we can't
25 use grackle_pcibios_{read,write}_config_dword. */
26 static inline void grackle_set_stg(struct pci_controller
* bp
, int enable
)
30 out_be32(bp
->cfg_addr
, GRACKLE_CFA(0, 0, 0xa8));
31 val
= in_le32(bp
->cfg_data
);
32 val
= enable
? (val
| GRACKLE_PICR1_STG
) :
33 (val
& ~GRACKLE_PICR1_STG
);
34 out_be32(bp
->cfg_addr
, GRACKLE_CFA(0, 0, 0xa8));
35 out_le32(bp
->cfg_data
, val
);
36 (void)in_le32(bp
->cfg_data
);
39 static inline void grackle_set_loop_snoop(struct pci_controller
*bp
, int enable
)
43 out_be32(bp
->cfg_addr
, GRACKLE_CFA(0, 0, 0xa8));
44 val
= in_le32(bp
->cfg_data
);
45 val
= enable
? (val
| GRACKLE_PICR1_LOOPSNOOP
) :
46 (val
& ~GRACKLE_PICR1_LOOPSNOOP
);
47 out_be32(bp
->cfg_addr
, GRACKLE_CFA(0, 0, 0xa8));
48 out_le32(bp
->cfg_data
, val
);
49 (void)in_le32(bp
->cfg_data
);
52 void __init
setup_grackle(struct pci_controller
*hose
)
54 setup_indirect_pci(hose
, 0xfec00000, 0xfee00000, 0);
55 if (of_machine_is_compatible("PowerMac1,1"))
56 pci_add_flags(PCI_REASSIGN_ALL_BUS
);
57 if (of_machine_is_compatible("AAPL,PowerBook1998"))
58 grackle_set_loop_snoop(hose
, 1);
59 #if 0 /* Disabled for now, HW problems ??? */
60 grackle_set_stg(hose
, 1);