arch/sh/kernel/cpu/sh4a/perf_event.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Performance events support for SH-4A performance counters
   4  *
   5  *  Copyright (C) 2009, 2010  Paul Mundt
   6  */
   7 #include <linux/kernel.h>
   8 #include <linux/init.h>
   9 #include <linux/io.h>
  10 #include <linux/irq.h>
  11 #include <linux/perf_event.h>
  12 #include <asm/processor.h>
  13
  14 #define PPC_CCBR(idx)   (0xff200800 + (sizeof(u32) * idx))
  15 #define PPC_PMCTR(idx)  (0xfc100000 + (sizeof(u32) * idx))
  16
  17 #define CCBR_CIT_MASK   (0x7ff << 6)
  18 #define CCBR_DUC        (1 << 3)
  19 #define CCBR_CMDS       (1 << 1)
  20 #define CCBR_PPCE       (1 << 0)
  21
  22 #ifdef CONFIG_CPU_SHX3
  23 /*
  24  * The PMCAT location for SH-X3 CPUs was quietly moved, while the CCBR
  25  * and PMCTR locations remains tentatively constant. This change remains
  26  * wholly undocumented, and was simply found through trial and error.
  27  *
  28  * Early cuts of SH-X3 still appear to use the SH-X/SH-X2 locations, and
  29  * it's unclear when this ceased to be the case. For now we always use
  30  * the new location (if future parts keep up with this trend then
  31  * scanning for them at runtime also remains a viable option.)
  32  *
  33  * The gap in the register space also suggests that there are other
  34  * undocumented counters, so this will need to be revisited at a later
  35  * point in time.
  36  */
  37 #define PPC_PMCAT       0xfc100240
  38 #else
  39 #define PPC_PMCAT       0xfc100080
  40 #endif
  41
  42 #define PMCAT_OVF3      (1 << 27)
  43 #define PMCAT_CNN3      (1 << 26)
  44 #define PMCAT_CLR3      (1 << 25)
  45 #define PMCAT_OVF2      (1 << 19)
  46 #define PMCAT_CLR2      (1 << 17)
  47 #define PMCAT_OVF1      (1 << 11)
  48 #define PMCAT_CNN1      (1 << 10)
  49 #define PMCAT_CLR1      (1 << 9)
  50 #define PMCAT_OVF0      (1 << 3)
  51 #define PMCAT_CLR0      (1 << 1)
  52
  53 static struct sh_pmu sh4a_pmu;
  54
  55 /*
  56  * Supported raw event codes:
  57  *
  58  *      Event Code      Description
  59  *      ----------      -----------
  60  *
  61  *      0x0000          number of elapsed cycles
  62  *      0x0200          number of elapsed cycles in privileged mode
  63  *      0x0280          number of elapsed cycles while SR.BL is asserted
  64  *      0x0202          instruction execution
  65  *      0x0203          instruction execution in parallel
  66  *      0x0204          number of unconditional branches
  67  *      0x0208          number of exceptions
  68  *      0x0209          number of interrupts
  69  *      0x0220          UTLB miss caused by instruction fetch
  70  *      0x0222          UTLB miss caused by operand access
  71  *      0x02a0          number of ITLB misses
  72  *      0x0028          number of accesses to instruction memories
  73  *      0x0029          number of accesses to instruction cache
  74  *      0x002a          instruction cache miss
  75  *      0x022e          number of access to instruction X/Y memory
  76  *      0x0030          number of reads to operand memories
  77  *      0x0038          number of writes to operand memories
  78  *      0x0031          number of operand cache read accesses
  79  *      0x0039          number of operand cache write accesses
  80  *      0x0032          operand cache read miss
  81  *      0x003a          operand cache write miss
  82  *      0x0236          number of reads to operand X/Y memory
  83  *      0x023e          number of writes to operand X/Y memory
  84  *      0x0237          number of reads to operand U memory
  85  *      0x023f          number of writes to operand U memory
  86  *      0x0337          number of U memory read buffer misses
  87  *      0x02b4          number of wait cycles due to operand read access
  88  *      0x02bc          number of wait cycles due to operand write access
  89  *      0x0033          number of wait cycles due to operand cache read miss
  90  *      0x003b          number of wait cycles due to operand cache write miss
  91  */
  92
  93 /*
  94  * Special reserved bits used by hardware emulators, read values will
  95  * vary, but writes must always be 0.
  96  */
  97 #define PMCAT_EMU_CLR_MASK      ((1 << 24) | (1 << 16) | (1 << 8) | (1 << 0))
  98
  99 static const int sh4a_general_events[] = {
 100         [PERF_COUNT_HW_CPU_CYCLES]              = 0x0000,
 101         [PERF_COUNT_HW_INSTRUCTIONS]            = 0x0202,
 102         [PERF_COUNT_HW_CACHE_REFERENCES]        = 0x0029,       /* I-cache */
 103         [PERF_COUNT_HW_CACHE_MISSES]            = 0x002a,       /* I-cache */
 104         [PERF_COUNT_HW_BRANCH_INSTRUCTIONS]     = 0x0204,
 105         [PERF_COUNT_HW_BRANCH_MISSES]           = -1,
 106         [PERF_COUNT_HW_BUS_CYCLES]              = -1,
 107 };
 108
 109 #define C(x)    PERF_COUNT_HW_CACHE_##x
 110
 111 static const int sh4a_cache_events
 112                         [PERF_COUNT_HW_CACHE_MAX]
 113                         [PERF_COUNT_HW_CACHE_OP_MAX]
 114                         [PERF_COUNT_HW_CACHE_RESULT_MAX] =
 115 {
 116         [ C(L1D) ] = {
 117                 [ C(OP_READ) ] = {
 118                         [ C(RESULT_ACCESS) ] = 0x0031,
 119                         [ C(RESULT_MISS)   ] = 0x0032,
 120                 },
 121                 [ C(OP_WRITE) ] = {
 122                         [ C(RESULT_ACCESS) ] = 0x0039,
 123                         [ C(RESULT_MISS)   ] = 0x003a,
 124                 },
 125                 [ C(OP_PREFETCH) ] = {
 126                         [ C(RESULT_ACCESS) ] = 0,
 127                         [ C(RESULT_MISS)   ] = 0,
 128                 },
 129         },
 130
 131         [ C(L1I) ] = {
 132                 [ C(OP_READ) ] = {
 133                         [ C(RESULT_ACCESS) ] = 0x0029,
 134                         [ C(RESULT_MISS)   ] = 0x002a,
 135                 },
 136                 [ C(OP_WRITE) ] = {
 137                         [ C(RESULT_ACCESS) ] = -1,
 138                         [ C(RESULT_MISS)   ] = -1,
 139                 },
 140                 [ C(OP_PREFETCH) ] = {
 141                         [ C(RESULT_ACCESS) ] = 0,
 142                         [ C(RESULT_MISS)   ] = 0,
 143                 },
 144         },
 145
 146         [ C(LL) ] = {
 147                 [ C(OP_READ) ] = {
 148                         [ C(RESULT_ACCESS) ] = 0x0030,
 149                         [ C(RESULT_MISS)   ] = 0,
 150                 },
 151                 [ C(OP_WRITE) ] = {
 152                         [ C(RESULT_ACCESS) ] = 0x0038,
 153                         [ C(RESULT_MISS)   ] = 0,
 154                 },
 155                 [ C(OP_PREFETCH) ] = {
 156                         [ C(RESULT_ACCESS) ] = 0,
 157                         [ C(RESULT_MISS)   ] = 0,
 158                 },
 159         },
 160
 161         [ C(DTLB) ] = {
 162                 [ C(OP_READ) ] = {
 163                         [ C(RESULT_ACCESS) ] = 0x0222,
 164                         [ C(RESULT_MISS)   ] = 0x0220,
 165                 },
 166                 [ C(OP_WRITE) ] = {
 167                         [ C(RESULT_ACCESS) ] = 0,
 168                         [ C(RESULT_MISS)   ] = 0,
 169                 },
 170                 [ C(OP_PREFETCH) ] = {
 171                         [ C(RESULT_ACCESS) ] = 0,
 172                         [ C(RESULT_MISS)   ] = 0,
 173                 },
 174         },
 175
 176         [ C(ITLB) ] = {
 177                 [ C(OP_READ) ] = {
 178                         [ C(RESULT_ACCESS) ] = 0,
 179                         [ C(RESULT_MISS)   ] = 0x02a0,
 180                 },
 181                 [ C(OP_WRITE) ] = {
 182                         [ C(RESULT_ACCESS) ] = -1,
 183                         [ C(RESULT_MISS)   ] = -1,
 184                 },
 185                 [ C(OP_PREFETCH) ] = {
 186                         [ C(RESULT_ACCESS) ] = -1,
 187                         [ C(RESULT_MISS)   ] = -1,
 188                 },
 189         },
 190
 191         [ C(BPU) ] = {
 192                 [ C(OP_READ) ] = {
 193                         [ C(RESULT_ACCESS) ] = -1,
 194                         [ C(RESULT_MISS)   ] = -1,
 195                 },
 196                 [ C(OP_WRITE) ] = {
 197                         [ C(RESULT_ACCESS) ] = -1,
 198                         [ C(RESULT_MISS)   ] = -1,
 199                 },
 200                 [ C(OP_PREFETCH) ] = {
 201                         [ C(RESULT_ACCESS) ] = -1,
 202                         [ C(RESULT_MISS)   ] = -1,
 203                 },
 204         },
 205
 206         [ C(NODE) ] = {
 207                 [ C(OP_READ) ] = {
 208                         [ C(RESULT_ACCESS) ] = -1,
 209                         [ C(RESULT_MISS)   ] = -1,
 210                 },
 211                 [ C(OP_WRITE) ] = {
 212                         [ C(RESULT_ACCESS) ] = -1,
 213                         [ C(RESULT_MISS)   ] = -1,
 214                 },
 215                 [ C(OP_PREFETCH) ] = {
 216                         [ C(RESULT_ACCESS) ] = -1,
 217                         [ C(RESULT_MISS)   ] = -1,
 218                 },
 219         },
 220 };
 221
 222 static int sh4a_event_map(int event)
 223 {
 224         return sh4a_general_events[event];
 225 }
 226
 227 static u64 sh4a_pmu_read(int idx)
 228 {
 229         return __raw_readl(PPC_PMCTR(idx));
 230 }
 231
 232 static void sh4a_pmu_disable(struct hw_perf_event *hwc, int idx)
 233 {
 234         unsigned int tmp;
 235
 236         tmp = __raw_readl(PPC_CCBR(idx));
 237         tmp &= ~(CCBR_CIT_MASK | CCBR_DUC);
 238         __raw_writel(tmp, PPC_CCBR(idx));
 239 }
 240
 241 static void sh4a_pmu_enable(struct hw_perf_event *hwc, int idx)
 242 {
 243         unsigned int tmp;
 244
 245         tmp = __raw_readl(PPC_PMCAT);
 246         tmp &= ~PMCAT_EMU_CLR_MASK;
 247         tmp |= idx ? PMCAT_CLR1 : PMCAT_CLR0;
 248         __raw_writel(tmp, PPC_PMCAT);
 249
 250         tmp = __raw_readl(PPC_CCBR(idx));
 251         tmp |= (hwc->config << 6) | CCBR_CMDS | CCBR_PPCE;
 252         __raw_writel(tmp, PPC_CCBR(idx));
 253
 254         __raw_writel(__raw_readl(PPC_CCBR(idx)) | CCBR_DUC, PPC_CCBR(idx));
 255 }
 256
 257 static void sh4a_pmu_disable_all(void)
 258 {
 259         int i;
 260
 261         for (i = 0; i < sh4a_pmu.num_events; i++)
 262                 __raw_writel(__raw_readl(PPC_CCBR(i)) & ~CCBR_DUC, PPC_CCBR(i));
 263 }
 264
 265 static void sh4a_pmu_enable_all(void)
 266 {
 267         int i;
 268
 269         for (i = 0; i < sh4a_pmu.num_events; i++)
 270                 __raw_writel(__raw_readl(PPC_CCBR(i)) | CCBR_DUC, PPC_CCBR(i));
 271 }
 272
 273 static struct sh_pmu sh4a_pmu = {
 274         .name           = "sh4a",
 275         .num_events     = 2,
 276         .event_map      = sh4a_event_map,
 277         .max_events     = ARRAY_SIZE(sh4a_general_events),
 278         .raw_event_mask = 0x3ff,
 279         .cache_events   = &sh4a_cache_events,
 280         .read           = sh4a_pmu_read,
 281         .disable        = sh4a_pmu_disable,
 282         .enable         = sh4a_pmu_enable,
 283         .disable_all    = sh4a_pmu_disable_all,
 284         .enable_all     = sh4a_pmu_enable_all,
 285 };
 286
 287 static int __init sh4a_pmu_init(void)
 288 {
 289         /*
 290          * Make sure this CPU actually has perf counters.
 291          */
 292         if (!(boot_cpu_data.flags & CPU_HAS_PERF_COUNTER)) {
 293                 pr_notice("HW perf events unsupported, software events only.\n");
 294                 return -ENODEV;
 295         }
 296
 297         return register_sh_pmu(&sh4a_pmu);
 298 }
 299 early_initcall(sh4a_pmu_init);