?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge tag 'sched-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel...
[linux/fpc-iii.git] / arch / sparc / kernel / sbus.c
blob32141e1006c4a4907c5d6bbc4caba20aa30cb5db
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * sbus.c: UltraSparc SBUS controller support.
4 *
5 * Copyright (C) 1999 David S. Miller (davem@redhat.com)
6 */
7
8 #include <linux/kernel.h>
9 #include <linux/types.h>
10 #include <linux/mm.h>
11 #include <linux/spinlock.h>
12 #include <linux/slab.h>
13 #include <linux/export.h>
14 #include <linux/init.h>
15 #include <linux/interrupt.h>
16 #include <linux/of.h>
17 #include <linux/of_device.h>
18 #include <linux/numa.h>
19
20 #include <asm/page.h>
21 #include <asm/io.h>
22 #include <asm/upa.h>
23 #include <asm/cache.h>
24 #include <asm/dma.h>
25 #include <asm/irq.h>
26 #include <asm/prom.h>
27 #include <asm/oplib.h>
28 #include <asm/starfire.h>
29
30 #include "iommu_common.h"
31
32 #define MAP_BASE ((u32)0xc0000000)
33
34 /* Offsets from iommu_regs */
35 #define SYSIO_IOMMUREG_BASE 0x2400UL
36 #define IOMMU_CONTROL (0x2400UL - 0x2400UL) /* IOMMU control register */
37 #define IOMMU_TSBBASE (0x2408UL - 0x2400UL) /* TSB base address register */
38 #define IOMMU_FLUSH (0x2410UL - 0x2400UL) /* IOMMU flush register */
39 #define IOMMU_VADIAG (0x4400UL - 0x2400UL) /* SBUS virtual address diagnostic */
40 #define IOMMU_TAGCMP (0x4408UL - 0x2400UL) /* TLB tag compare diagnostics */
41 #define IOMMU_LRUDIAG (0x4500UL - 0x2400UL) /* IOMMU LRU queue diagnostics */
42 #define IOMMU_TAGDIAG (0x4580UL - 0x2400UL) /* TLB tag diagnostics */
43 #define IOMMU_DRAMDIAG (0x4600UL - 0x2400UL) /* TLB data RAM diagnostics */
44
45 #define IOMMU_DRAM_VALID (1UL << 30UL)
46
47 /* Offsets from strbuf_regs */
48 #define SYSIO_STRBUFREG_BASE 0x2800UL
49 #define STRBUF_CONTROL (0x2800UL - 0x2800UL) /* Control */
50 #define STRBUF_PFLUSH (0x2808UL - 0x2800UL) /* Page flush/invalidate */
51 #define STRBUF_FSYNC (0x2810UL - 0x2800UL) /* Flush synchronization */
52 #define STRBUF_DRAMDIAG (0x5000UL - 0x2800UL) /* data RAM diagnostic */
53 #define STRBUF_ERRDIAG (0x5400UL - 0x2800UL) /* error status diagnostics */
54 #define STRBUF_PTAGDIAG (0x5800UL - 0x2800UL) /* Page tag diagnostics */
55 #define STRBUF_LTAGDIAG (0x5900UL - 0x2800UL) /* Line tag diagnostics */
56
57 #define STRBUF_TAG_VALID 0x02UL
58
59 /* Enable 64-bit DVMA mode for the given device. */
60 void sbus_set_sbus64(struct device *dev, int bursts)
61 {
62 struct iommu *iommu = dev->archdata.iommu;
63 struct platform_device *op = to_platform_device(dev);
64 const struct linux_prom_registers *regs;
65 unsigned long cfg_reg;
66 int slot;
67 u64 val;
68
69 regs = of_get_property(op->dev.of_node, "reg", NULL);
70 if (!regs) {
71 printk(KERN_ERR "sbus_set_sbus64: Cannot find regs for %pOF\n",
72 op->dev.of_node);
73 return;
74 }
75 slot = regs->which_io;
76
77 cfg_reg = iommu->write_complete_reg;
78 switch (slot) {
79 case 0:
80 cfg_reg += 0x20UL;
81 break;
82 case 1:
83 cfg_reg += 0x28UL;
84 break;
85 case 2:
86 cfg_reg += 0x30UL;
87 break;
88 case 3:
89 cfg_reg += 0x38UL;
90 break;
91 case 13:
92 cfg_reg += 0x40UL;
93 break;
94 case 14:
95 cfg_reg += 0x48UL;
96 break;
97 case 15:
98 cfg_reg += 0x50UL;
99 break;
100
101 default:
102 return;
103 }
104
105 val = upa_readq(cfg_reg);
106 if (val & (1UL << 14UL)) {
107 /* Extended transfer mode already enabled. */
108 return;
109 }
110
111 val |= (1UL << 14UL);
112
113 if (bursts & DMA_BURST8)
114 val |= (1UL << 1UL);
115 if (bursts & DMA_BURST16)
116 val |= (1UL << 2UL);
117 if (bursts & DMA_BURST32)
118 val |= (1UL << 3UL);
119 if (bursts & DMA_BURST64)
120 val |= (1UL << 4UL);
121 upa_writeq(val, cfg_reg);
122 }
123 EXPORT_SYMBOL(sbus_set_sbus64);
124
125 /* INO number to IMAP register offset for SYSIO external IRQ's.
126 * This should conform to both Sunfire/Wildfire server and Fusion
127 * desktop designs.
128 */
129 #define SYSIO_IMAP_SLOT0 0x2c00UL
130 #define SYSIO_IMAP_SLOT1 0x2c08UL
131 #define SYSIO_IMAP_SLOT2 0x2c10UL
132 #define SYSIO_IMAP_SLOT3 0x2c18UL
133 #define SYSIO_IMAP_SCSI 0x3000UL
134 #define SYSIO_IMAP_ETH 0x3008UL
135 #define SYSIO_IMAP_BPP 0x3010UL
136 #define SYSIO_IMAP_AUDIO 0x3018UL
137 #define SYSIO_IMAP_PFAIL 0x3020UL
138 #define SYSIO_IMAP_KMS 0x3028UL
139 #define SYSIO_IMAP_FLPY 0x3030UL
140 #define SYSIO_IMAP_SHW 0x3038UL
141 #define SYSIO_IMAP_KBD 0x3040UL
142 #define SYSIO_IMAP_MS 0x3048UL
143 #define SYSIO_IMAP_SER 0x3050UL
144 #define SYSIO_IMAP_TIM0 0x3060UL
145 #define SYSIO_IMAP_TIM1 0x3068UL
146 #define SYSIO_IMAP_UE 0x3070UL
147 #define SYSIO_IMAP_CE 0x3078UL
148 #define SYSIO_IMAP_SBERR 0x3080UL
149 #define SYSIO_IMAP_PMGMT 0x3088UL
150 #define SYSIO_IMAP_GFX 0x3090UL
151 #define SYSIO_IMAP_EUPA 0x3098UL
152
153 #define bogon ((unsigned long) -1)
154 static unsigned long sysio_irq_offsets[] = {
155 /* SBUS Slot 0 --> 3, level 1 --> 7 */
156 SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0,
157 SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0,
158 SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1,
159 SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1,
160 SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2,
161 SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2,
162 SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3,
163 SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3,
164
165 /* Onboard devices (not relevant/used on SunFire). */
166 SYSIO_IMAP_SCSI,
167 SYSIO_IMAP_ETH,
168 SYSIO_IMAP_BPP,
169 bogon,
170 SYSIO_IMAP_AUDIO,
171 SYSIO_IMAP_PFAIL,
172 bogon,
173 bogon,
174 SYSIO_IMAP_KMS,
175 SYSIO_IMAP_FLPY,
176 SYSIO_IMAP_SHW,
177 SYSIO_IMAP_KBD,
178 SYSIO_IMAP_MS,
179 SYSIO_IMAP_SER,
180 bogon,
181 bogon,
182 SYSIO_IMAP_TIM0,
183 SYSIO_IMAP_TIM1,
184 bogon,
185 bogon,
186 SYSIO_IMAP_UE,
187 SYSIO_IMAP_CE,
188 SYSIO_IMAP_SBERR,
189 SYSIO_IMAP_PMGMT,
190 };
191
192 #undef bogon
193
194 #define NUM_SYSIO_OFFSETS ARRAY_SIZE(sysio_irq_offsets)
195
196 /* Convert Interrupt Mapping register pointer to associated
197 * Interrupt Clear register pointer, SYSIO specific version.
198 */
199 #define SYSIO_ICLR_UNUSED0 0x3400UL
200 #define SYSIO_ICLR_SLOT0 0x3408UL
201 #define SYSIO_ICLR_SLOT1 0x3448UL
202 #define SYSIO_ICLR_SLOT2 0x3488UL
203 #define SYSIO_ICLR_SLOT3 0x34c8UL
204 static unsigned long sysio_imap_to_iclr(unsigned long imap)
205 {
206 unsigned long diff = SYSIO_ICLR_UNUSED0 - SYSIO_IMAP_SLOT0;
207 return imap + diff;
208 }
209
210 static unsigned int sbus_build_irq(struct platform_device *op, unsigned int ino)
211 {
212 struct iommu *iommu = op->dev.archdata.iommu;
213 unsigned long reg_base = iommu->write_complete_reg - 0x2000UL;
214 unsigned long imap, iclr;
215 int sbus_level = 0;
216
217 imap = sysio_irq_offsets[ino];
218 if (imap == ((unsigned long)-1)) {
219 prom_printf("get_irq_translations: Bad SYSIO INO[%x]\n",
220 ino);
221 prom_halt();
222 }
223 imap += reg_base;
224
225 /* SYSIO inconsistency. For external SLOTS, we have to select
226 * the right ICLR register based upon the lower SBUS irq level
227 * bits.
228 */
229 if (ino >= 0x20) {
230 iclr = sysio_imap_to_iclr(imap);
231 } else {
232 int sbus_slot = (ino & 0x18)>>3;
233
234 sbus_level = ino & 0x7;
235
236 switch(sbus_slot) {
237 case 0:
238 iclr = reg_base + SYSIO_ICLR_SLOT0;
239 break;
240 case 1:
241 iclr = reg_base + SYSIO_ICLR_SLOT1;
242 break;
243 case 2:
244 iclr = reg_base + SYSIO_ICLR_SLOT2;
245 break;
246 default:
247 case 3:
248 iclr = reg_base + SYSIO_ICLR_SLOT3;
249 break;
250 }
251
252 iclr += ((unsigned long)sbus_level - 1UL) * 8UL;
253 }
254 return build_irq(sbus_level, iclr, imap);
255 }
256
257 /* Error interrupt handling. */
258 #define SYSIO_UE_AFSR 0x0030UL
259 #define SYSIO_UE_AFAR 0x0038UL
260 #define SYSIO_UEAFSR_PPIO 0x8000000000000000UL /* Primary PIO cause */
261 #define SYSIO_UEAFSR_PDRD 0x4000000000000000UL /* Primary DVMA read cause */
262 #define SYSIO_UEAFSR_PDWR 0x2000000000000000UL /* Primary DVMA write cause */
263 #define SYSIO_UEAFSR_SPIO 0x1000000000000000UL /* Secondary PIO is cause */
264 #define SYSIO_UEAFSR_SDRD 0x0800000000000000UL /* Secondary DVMA read cause */
265 #define SYSIO_UEAFSR_SDWR 0x0400000000000000UL /* Secondary DVMA write cause*/
266 #define SYSIO_UEAFSR_RESV1 0x03ff000000000000UL /* Reserved */
267 #define SYSIO_UEAFSR_DOFF 0x0000e00000000000UL /* Doubleword Offset */
268 #define SYSIO_UEAFSR_SIZE 0x00001c0000000000UL /* Bad transfer size 2^SIZE */
269 #define SYSIO_UEAFSR_MID 0x000003e000000000UL /* UPA MID causing the fault */
270 #define SYSIO_UEAFSR_RESV2 0x0000001fffffffffUL /* Reserved */
271 static irqreturn_t sysio_ue_handler(int irq, void *dev_id)
272 {
273 struct platform_device *op = dev_id;
274 struct iommu *iommu = op->dev.archdata.iommu;
275 unsigned long reg_base = iommu->write_complete_reg - 0x2000UL;
276 unsigned long afsr_reg, afar_reg;
277 unsigned long afsr, afar, error_bits;
278 int reported, portid;
279
280 afsr_reg = reg_base + SYSIO_UE_AFSR;
281 afar_reg = reg_base + SYSIO_UE_AFAR;
282
283 /* Latch error status. */
284 afsr = upa_readq(afsr_reg);
285 afar = upa_readq(afar_reg);
286
287 /* Clear primary/secondary error status bits. */
288 error_bits = afsr &
289 (SYSIO_UEAFSR_PPIO | SYSIO_UEAFSR_PDRD | SYSIO_UEAFSR_PDWR |
290 SYSIO_UEAFSR_SPIO | SYSIO_UEAFSR_SDRD | SYSIO_UEAFSR_SDWR);
291 upa_writeq(error_bits, afsr_reg);
292
293 portid = of_getintprop_default(op->dev.of_node, "portid", -1);
294
295 /* Log the error. */
296 printk("SYSIO[%x]: Uncorrectable ECC Error, primary error type[%s]\n",
297 portid,
298 (((error_bits & SYSIO_UEAFSR_PPIO) ?
299 "PIO" :
300 ((error_bits & SYSIO_UEAFSR_PDRD) ?
301 "DVMA Read" :
302 ((error_bits & SYSIO_UEAFSR_PDWR) ?
303 "DVMA Write" : "???")))));
304 printk("SYSIO[%x]: DOFF[%lx] SIZE[%lx] MID[%lx]\n",
305 portid,
306 (afsr & SYSIO_UEAFSR_DOFF) >> 45UL,
307 (afsr & SYSIO_UEAFSR_SIZE) >> 42UL,
308 (afsr & SYSIO_UEAFSR_MID) >> 37UL);
309 printk("SYSIO[%x]: AFAR[%016lx]\n", portid, afar);
310 printk("SYSIO[%x]: Secondary UE errors [", portid);
311 reported = 0;
312 if (afsr & SYSIO_UEAFSR_SPIO) {
313 reported++;
314 printk("(PIO)");
315 }
316 if (afsr & SYSIO_UEAFSR_SDRD) {
317 reported++;
318 printk("(DVMA Read)");
319 }
320 if (afsr & SYSIO_UEAFSR_SDWR) {
321 reported++;
322 printk("(DVMA Write)");
323 }
324 if (!reported)
325 printk("(none)");
326 printk("]\n");
327
328 return IRQ_HANDLED;
329 }
330
331 #define SYSIO_CE_AFSR 0x0040UL
332 #define SYSIO_CE_AFAR 0x0048UL
333 #define SYSIO_CEAFSR_PPIO 0x8000000000000000UL /* Primary PIO cause */
334 #define SYSIO_CEAFSR_PDRD 0x4000000000000000UL /* Primary DVMA read cause */
335 #define SYSIO_CEAFSR_PDWR 0x2000000000000000UL /* Primary DVMA write cause */
336 #define SYSIO_CEAFSR_SPIO 0x1000000000000000UL /* Secondary PIO cause */
337 #define SYSIO_CEAFSR_SDRD 0x0800000000000000UL /* Secondary DVMA read cause */
338 #define SYSIO_CEAFSR_SDWR 0x0400000000000000UL /* Secondary DVMA write cause*/
339 #define SYSIO_CEAFSR_RESV1 0x0300000000000000UL /* Reserved */
340 #define SYSIO_CEAFSR_ESYND 0x00ff000000000000UL /* Syndrome Bits */
341 #define SYSIO_CEAFSR_DOFF 0x0000e00000000000UL /* Double Offset */
342 #define SYSIO_CEAFSR_SIZE 0x00001c0000000000UL /* Bad transfer size 2^SIZE */
343 #define SYSIO_CEAFSR_MID 0x000003e000000000UL /* UPA MID causing the fault */
344 #define SYSIO_CEAFSR_RESV2 0x0000001fffffffffUL /* Reserved */
345 static irqreturn_t sysio_ce_handler(int irq, void *dev_id)
346 {
347 struct platform_device *op = dev_id;
348 struct iommu *iommu = op->dev.archdata.iommu;
349 unsigned long reg_base = iommu->write_complete_reg - 0x2000UL;
350 unsigned long afsr_reg, afar_reg;
351 unsigned long afsr, afar, error_bits;
352 int reported, portid;
353
354 afsr_reg = reg_base + SYSIO_CE_AFSR;
355 afar_reg = reg_base + SYSIO_CE_AFAR;
356
357 /* Latch error status. */
358 afsr = upa_readq(afsr_reg);
359 afar = upa_readq(afar_reg);
360
361 /* Clear primary/secondary error status bits. */
362 error_bits = afsr &
363 (SYSIO_CEAFSR_PPIO | SYSIO_CEAFSR_PDRD | SYSIO_CEAFSR_PDWR |
364 SYSIO_CEAFSR_SPIO | SYSIO_CEAFSR_SDRD | SYSIO_CEAFSR_SDWR);
365 upa_writeq(error_bits, afsr_reg);
366
367 portid = of_getintprop_default(op->dev.of_node, "portid", -1);
368
369 printk("SYSIO[%x]: Correctable ECC Error, primary error type[%s]\n",
370 portid,
371 (((error_bits & SYSIO_CEAFSR_PPIO) ?
372 "PIO" :
373 ((error_bits & SYSIO_CEAFSR_PDRD) ?
374 "DVMA Read" :
375 ((error_bits & SYSIO_CEAFSR_PDWR) ?
376 "DVMA Write" : "???")))));
377
378 /* XXX Use syndrome and afar to print out module string just like
379 * XXX UDB CE trap handler does... -DaveM
380 */
381 printk("SYSIO[%x]: DOFF[%lx] ECC Syndrome[%lx] Size[%lx] MID[%lx]\n",
382 portid,
383 (afsr & SYSIO_CEAFSR_DOFF) >> 45UL,
384 (afsr & SYSIO_CEAFSR_ESYND) >> 48UL,
385 (afsr & SYSIO_CEAFSR_SIZE) >> 42UL,
386 (afsr & SYSIO_CEAFSR_MID) >> 37UL);
387 printk("SYSIO[%x]: AFAR[%016lx]\n", portid, afar);
388
389 printk("SYSIO[%x]: Secondary CE errors [", portid);
390 reported = 0;
391 if (afsr & SYSIO_CEAFSR_SPIO) {
392 reported++;
393 printk("(PIO)");
394 }
395 if (afsr & SYSIO_CEAFSR_SDRD) {
396 reported++;
397 printk("(DVMA Read)");
398 }
399 if (afsr & SYSIO_CEAFSR_SDWR) {
400 reported++;
401 printk("(DVMA Write)");
402 }
403 if (!reported)
404 printk("(none)");
405 printk("]\n");
406
407 return IRQ_HANDLED;
408 }
409
410 #define SYSIO_SBUS_AFSR 0x2010UL
411 #define SYSIO_SBUS_AFAR 0x2018UL
412 #define SYSIO_SBAFSR_PLE 0x8000000000000000UL /* Primary Late PIO Error */
413 #define SYSIO_SBAFSR_PTO 0x4000000000000000UL /* Primary SBUS Timeout */
414 #define SYSIO_SBAFSR_PBERR 0x2000000000000000UL /* Primary SBUS Error ACK */
415 #define SYSIO_SBAFSR_SLE 0x1000000000000000UL /* Secondary Late PIO Error */
416 #define SYSIO_SBAFSR_STO 0x0800000000000000UL /* Secondary SBUS Timeout */
417 #define SYSIO_SBAFSR_SBERR 0x0400000000000000UL /* Secondary SBUS Error ACK */
418 #define SYSIO_SBAFSR_RESV1 0x03ff000000000000UL /* Reserved */
419 #define SYSIO_SBAFSR_RD 0x0000800000000000UL /* Primary was late PIO read */
420 #define SYSIO_SBAFSR_RESV2 0x0000600000000000UL /* Reserved */
421 #define SYSIO_SBAFSR_SIZE 0x00001c0000000000UL /* Size of transfer */
422 #define SYSIO_SBAFSR_MID 0x000003e000000000UL /* MID causing the error */
423 #define SYSIO_SBAFSR_RESV3 0x0000001fffffffffUL /* Reserved */
424 static irqreturn_t sysio_sbus_error_handler(int irq, void *dev_id)
425 {
426 struct platform_device *op = dev_id;
427 struct iommu *iommu = op->dev.archdata.iommu;
428 unsigned long afsr_reg, afar_reg, reg_base;
429 unsigned long afsr, afar, error_bits;
430 int reported, portid;
431
432 reg_base = iommu->write_complete_reg - 0x2000UL;
433 afsr_reg = reg_base + SYSIO_SBUS_AFSR;
434 afar_reg = reg_base + SYSIO_SBUS_AFAR;
435
436 afsr = upa_readq(afsr_reg);
437 afar = upa_readq(afar_reg);
438
439 /* Clear primary/secondary error status bits. */
440 error_bits = afsr &
441 (SYSIO_SBAFSR_PLE | SYSIO_SBAFSR_PTO | SYSIO_SBAFSR_PBERR |
442 SYSIO_SBAFSR_SLE | SYSIO_SBAFSR_STO | SYSIO_SBAFSR_SBERR);
443 upa_writeq(error_bits, afsr_reg);
444
445 portid = of_getintprop_default(op->dev.of_node, "portid", -1);
446
447 /* Log the error. */
448 printk("SYSIO[%x]: SBUS Error, primary error type[%s] read(%d)\n",
449 portid,
450 (((error_bits & SYSIO_SBAFSR_PLE) ?
451 "Late PIO Error" :
452 ((error_bits & SYSIO_SBAFSR_PTO) ?
453 "Time Out" :
454 ((error_bits & SYSIO_SBAFSR_PBERR) ?
455 "Error Ack" : "???")))),
456 (afsr & SYSIO_SBAFSR_RD) ? 1 : 0);
457 printk("SYSIO[%x]: size[%lx] MID[%lx]\n",
458 portid,
459 (afsr & SYSIO_SBAFSR_SIZE) >> 42UL,
460 (afsr & SYSIO_SBAFSR_MID) >> 37UL);
461 printk("SYSIO[%x]: AFAR[%016lx]\n", portid, afar);
462 printk("SYSIO[%x]: Secondary SBUS errors [", portid);
463 reported = 0;
464 if (afsr & SYSIO_SBAFSR_SLE) {
465 reported++;
466 printk("(Late PIO Error)");
467 }
468 if (afsr & SYSIO_SBAFSR_STO) {
469 reported++;
470 printk("(Time Out)");
471 }
472 if (afsr & SYSIO_SBAFSR_SBERR) {
473 reported++;
474 printk("(Error Ack)");
475 }
476 if (!reported)
477 printk("(none)");
478 printk("]\n");
479
480 /* XXX check iommu/strbuf for further error status XXX */
481
482 return IRQ_HANDLED;
483 }
484
485 #define ECC_CONTROL 0x0020UL
486 #define SYSIO_ECNTRL_ECCEN 0x8000000000000000UL /* Enable ECC Checking */
487 #define SYSIO_ECNTRL_UEEN 0x4000000000000000UL /* Enable UE Interrupts */
488 #define SYSIO_ECNTRL_CEEN 0x2000000000000000UL /* Enable CE Interrupts */
489
490 #define SYSIO_UE_INO 0x34
491 #define SYSIO_CE_INO 0x35
492 #define SYSIO_SBUSERR_INO 0x36
493
494 static void __init sysio_register_error_handlers(struct platform_device *op)
495 {
496 struct iommu *iommu = op->dev.archdata.iommu;
497 unsigned long reg_base = iommu->write_complete_reg - 0x2000UL;
498 unsigned int irq;
499 u64 control;
500 int portid;
501
502 portid = of_getintprop_default(op->dev.of_node, "portid", -1);
503
504 irq = sbus_build_irq(op, SYSIO_UE_INO);
505 if (request_irq(irq, sysio_ue_handler, 0,
506 "SYSIO_UE", op) < 0) {
507 prom_printf("SYSIO[%x]: Cannot register UE interrupt.\n",
508 portid);
509 prom_halt();
510 }
511
512 irq = sbus_build_irq(op, SYSIO_CE_INO);
513 if (request_irq(irq, sysio_ce_handler, 0,
514 "SYSIO_CE", op) < 0) {
515 prom_printf("SYSIO[%x]: Cannot register CE interrupt.\n",
516 portid);
517 prom_halt();
518 }
519
520 irq = sbus_build_irq(op, SYSIO_SBUSERR_INO);
521 if (request_irq(irq, sysio_sbus_error_handler, 0,
522 "SYSIO_SBERR", op) < 0) {
523 prom_printf("SYSIO[%x]: Cannot register SBUS Error interrupt.\n",
524 portid);
525 prom_halt();
526 }
527
528 /* Now turn the error interrupts on and also enable ECC checking. */
529 upa_writeq((SYSIO_ECNTRL_ECCEN |
530 SYSIO_ECNTRL_UEEN |
531 SYSIO_ECNTRL_CEEN),
532 reg_base + ECC_CONTROL);
533
534 control = upa_readq(iommu->write_complete_reg);
535 control |= 0x100UL; /* SBUS Error Interrupt Enable */
536 upa_writeq(control, iommu->write_complete_reg);
537 }
538
539 /* Boot time initialization. */
540 static void __init sbus_iommu_init(struct platform_device *op)
541 {
542 const struct linux_prom64_registers *pr;
543 struct device_node *dp = op->dev.of_node;
544 struct iommu *iommu;
545 struct strbuf *strbuf;
546 unsigned long regs, reg_base;
547 int i, portid;
548 u64 control;
549
550 pr = of_get_property(dp, "reg", NULL);
551 if (!pr) {
552 prom_printf("sbus_iommu_init: Cannot map SYSIO "
553 "control registers.\n");
554 prom_halt();
555 }
556 regs = pr->phys_addr;
557
558 iommu = kzalloc(sizeof(*iommu), GFP_ATOMIC);
559 strbuf = kzalloc(sizeof(*strbuf), GFP_ATOMIC);
560 if (!iommu || !strbuf)
561 goto fatal_memory_error;
562
563 op->dev.archdata.iommu = iommu;
564 op->dev.archdata.stc = strbuf;
565 op->dev.archdata.numa_node = NUMA_NO_NODE;
566
567 reg_base = regs + SYSIO_IOMMUREG_BASE;
568 iommu->iommu_control = reg_base + IOMMU_CONTROL;
569 iommu->iommu_tsbbase = reg_base + IOMMU_TSBBASE;
570 iommu->iommu_flush = reg_base + IOMMU_FLUSH;
571 iommu->iommu_tags = iommu->iommu_control +
572 (IOMMU_TAGDIAG - IOMMU_CONTROL);
573
574 reg_base = regs + SYSIO_STRBUFREG_BASE;
575 strbuf->strbuf_control = reg_base + STRBUF_CONTROL;
576 strbuf->strbuf_pflush = reg_base + STRBUF_PFLUSH;
577 strbuf->strbuf_fsync = reg_base + STRBUF_FSYNC;
578
579 strbuf->strbuf_enabled = 1;
580
581 strbuf->strbuf_flushflag = (volatile unsigned long *)
582 ((((unsigned long)&strbuf->__flushflag_buf[0])
583 + 63UL)
584 & ~63UL);
585 strbuf->strbuf_flushflag_pa = (unsigned long)
586 __pa(strbuf->strbuf_flushflag);
587
588 /* The SYSIO SBUS control register is used for dummy reads
589 * in order to ensure write completion.
590 */
591 iommu->write_complete_reg = regs + 0x2000UL;
592
593 portid = of_getintprop_default(op->dev.of_node, "portid", -1);
594 printk(KERN_INFO "SYSIO: UPA portID %x, at %016lx\n",
595 portid, regs);
596
597 /* Setup for TSB_SIZE=7, TBW_SIZE=0, MMU_DE=1, MMU_EN=1 */
598 if (iommu_table_init(iommu, IO_TSB_SIZE, MAP_BASE, 0xffffffff, -1))
599 goto fatal_memory_error;
600
601 control = upa_readq(iommu->iommu_control);
602 control = ((7UL << 16UL) |
603 (0UL << 2UL) |
604 (1UL << 1UL) |
605 (1UL << 0UL));
606 upa_writeq(control, iommu->iommu_control);
607
608 /* Clean out any cruft in the IOMMU using
609 * diagnostic accesses.
610 */
611 for (i = 0; i < 16; i++) {
612 unsigned long dram, tag;
613
614 dram = iommu->iommu_control + (IOMMU_DRAMDIAG - IOMMU_CONTROL);
615 tag = iommu->iommu_control + (IOMMU_TAGDIAG - IOMMU_CONTROL);
616
617 dram += (unsigned long)i * 8UL;
618 tag += (unsigned long)i * 8UL;
619 upa_writeq(0, dram);
620 upa_writeq(0, tag);
621 }
622 upa_readq(iommu->write_complete_reg);
623
624 /* Give the TSB to SYSIO. */
625 upa_writeq(__pa(iommu->page_table), iommu->iommu_tsbbase);
626
627 /* Setup streaming buffer, DE=1 SB_EN=1 */
628 control = (1UL << 1UL) | (1UL << 0UL);
629 upa_writeq(control, strbuf->strbuf_control);
630
631 /* Clear out the tags using diagnostics. */
632 for (i = 0; i < 16; i++) {
633 unsigned long ptag, ltag;
634
635 ptag = strbuf->strbuf_control +
636 (STRBUF_PTAGDIAG - STRBUF_CONTROL);
637 ltag = strbuf->strbuf_control +
638 (STRBUF_LTAGDIAG - STRBUF_CONTROL);
639 ptag += (unsigned long)i * 8UL;
640 ltag += (unsigned long)i * 8UL;
641
642 upa_writeq(0UL, ptag);
643 upa_writeq(0UL, ltag);
644 }
645
646 /* Enable DVMA arbitration for all devices/slots. */
647 control = upa_readq(iommu->write_complete_reg);
648 control |= 0x3fUL;
649 upa_writeq(control, iommu->write_complete_reg);
650
651 /* Now some Xfire specific grot... */
652 if (this_is_starfire)
653 starfire_hookup(portid);
654
655 sysio_register_error_handlers(op);
656 return;
657
658 fatal_memory_error:
659 kfree(iommu);
660 kfree(strbuf);
661 prom_printf("sbus_iommu_init: Fatal memory allocation error.\n");
662 }
663
664 static int __init sbus_init(void)
665 {
666 struct device_node *dp;
667
668 for_each_node_by_name(dp, "sbus") {
669 struct platform_device *op = of_find_device_by_node(dp);
670
671 sbus_iommu_init(op);
672 of_propagate_archdata(op);
673 }
674
675 return 0;
676 }
677
678 subsys_initcall(sbus_init);
Linux with added FPC-III support