| blob | cf7d7d9ad695c2e607ab10a9f0423215f079b1f7 |
1 /*
2 * TLB Exception Handling for ARC
3 *
4 * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 *
10 * Vineetg: April 2011 :
11 * -MMU v1: moved out legacy code into a seperate file
12 * -MMU v3: PD{0,1} bits layout changed: They don't overlap anymore,
13 * helps avoid a shift when preparing PD0 from PTE
14 *
15 * Vineetg: July 2009
16 * -For MMU V2, we need not do heuristics at the time of commiting a D-TLB
17 * entry, so that it doesn't knock out it's I-TLB entry
18 * -Some more fine tuning:
19 * bmsk instead of add, asl.cc instead of branch, delay slot utilise etc
20 *
21 * Vineetg: July 2009
22 * -Practically rewrote the I/D TLB Miss handlers
23 * Now 40 and 135 instructions a peice as compared to 131 and 449 resp.
24 * Hence Leaner by 1.5 K
25 * Used Conditional arithmetic to replace excessive branching
26 * Also used short instructions wherever possible
27 *
28 * Vineetg: Aug 13th 2008
29 * -Passing ECR (Exception Cause REG) to do_page_fault( ) for printing
30 * more information in case of a Fatality
31 *
32 * Vineetg: March 25th Bug #92690
33 * -Added Debug Code to check if sw-ASID == hw-ASID
35 * Rahul Trivedi, Amit Bhor: Codito Technologies 2004
36 */
38 .cpu A7
40 #include <linux/linkage.h>
41 #include <asm/entry.h>
42 #include <asm/mmu.h>
43 #include <asm/pgtable.h>
44 #include <asm/arcregs.h>
45 #include <asm/cache.h>
46 #include <asm/processor.h>
47 #include <asm/tlb-mmu1.h>
49 ;-----------------------------------------------------------------
50 ; ARC700 Exception Handling doesn't auto-switch stack and it only provides
51 ; ONE scratch AUX reg "ARC_REG_SCRATCH_DATA0"
52 ;
53 ; For Non-SMP, the scratch AUX reg is repurposed to cache task PGD, so a
54 ; "global" is used to free-up FIRST core reg to be able to code the rest of
55 ; exception prologue (IRQ auto-disabled on Exceptions, so it's IRQ-safe).
56 ; Since the Fast Path TLB Miss handler is coded with 4 regs, the remaining 3
57 ; need to be saved as well by extending the "global" to be 4 words. Hence
58 ; ".size ex_saved_reg1, 16"
59 ; [All of this dance is to avoid stack switching for each TLB Miss, since we
60 ; only need to save only a handful of regs, as opposed to complete reg file]
61 ;
62 ; For ARC700 SMP, the "global" obviously can't be used for free up the FIRST
63 ; core reg as it will not be SMP safe.
64 ; Thus scratch AUX reg is used (and no longer used to cache task PGD).
65 ; To save the rest of 3 regs - per cpu, the global is made "per-cpu".
66 ; Epilogue thus has to locate the "per-cpu" storage for regs.
67 ; To avoid cache line bouncing the per-cpu global is aligned/sized per
68 ; L1_CACHE_SHIFT, despite fundamentally needing to be 12 bytes only. Hence
69 ; ".size ex_saved_reg1, (CONFIG_NR_CPUS << L1_CACHE_SHIFT)"
71 ; As simple as that....
72 ;--------------------------------------------------------------------------
74 ; scratch memory to save [r0-r3] used to code TLB refill Handler
75 ARCFP_DATA ex_saved_reg1
76 .align 1 << L1_CACHE_SHIFT
77 .type ex_saved_reg1, @object
78 #ifdef CONFIG_SMP
79 .size ex_saved_reg1, (CONFIG_NR_CPUS << L1_CACHE_SHIFT)
80 ex_saved_reg1:
81 .zero (CONFIG_NR_CPUS << L1_CACHE_SHIFT)
82 #else
83 .size ex_saved_reg1, 16
84 ex_saved_reg1:
85 .zero 16
86 #endif
88 .macro TLBMISS_FREEUP_REGS
89 #ifdef CONFIG_SMP
90 sr r0, [ARC_REG_SCRATCH_DATA0] ; freeup r0 to code with
91 GET_CPU_ID r0 ; get to per cpu scratch mem,
92 lsl r0, r0, L1_CACHE_SHIFT ; cache line wide per cpu
93 add r0, @ex_saved_reg1, r0
94 #else
95 st r0, [@ex_saved_reg1]
96 mov_s r0, @ex_saved_reg1
97 #endif
98 st_s r1, [r0, 4]
99 st_s r2, [r0, 8]
100 st_s r3, [r0, 12]
102 ; VERIFY if the ASID in MMU-PID Reg is same as
103 ; one in Linux data structures
105 tlb_paranoid_check_asm
106 .endm
108 .macro TLBMISS_RESTORE_REGS
109 #ifdef CONFIG_SMP
110 GET_CPU_ID r0 ; get to per cpu scratch mem
111 lsl r0, r0, L1_CACHE_SHIFT ; each is cache line wide
112 add r0, @ex_saved_reg1, r0
113 ld_s r3, [r0,12]
114 ld_s r2, [r0, 8]
115 ld_s r1, [r0, 4]
116 lr r0, [ARC_REG_SCRATCH_DATA0]
117 #else
118 mov_s r0, @ex_saved_reg1
119 ld_s r3, [r0,12]
120 ld_s r2, [r0, 8]
121 ld_s r1, [r0, 4]
122 ld_s r0, [r0]
123 #endif
124 .endm
126 ;============================================================================
127 ; Troubleshooting Stuff
128 ;============================================================================
130 ; Linux keeps ASID (Address Space ID) in task->active_mm->context.asid
131 ; When Creating TLB Entries, instead of doing 3 dependent loads from memory,
132 ; we use the MMU PID Reg to get current ASID.
133 ; In bizzare scenrios SW and HW ASID can get out-of-sync which is trouble.
134 ; So we try to detect this in TLB Mis shandler
136 .macro tlb_paranoid_check_asm
138 #ifdef CONFIG_ARC_DBG_TLB_PARANOIA
140 GET_CURR_TASK_ON_CPU r3
141 ld r0, [r3, TASK_ACT_MM]
142 ld r0, [r0, MM_CTXT+MM_CTXT_ASID]
143 breq r0, 0, 55f ; Error if no ASID allocated
145 lr r1, [ARC_REG_PID]
146 and r1, r1, 0xFF
148 and r2, r0, 0xFF ; MMU PID bits only for comparison
149 breq r1, r2, 5f
151 55:
152 ; Error if H/w and S/w ASID don't match, but NOT if in kernel mode
153 lr r2, [erstatus]
154 bbit0 r2, STATUS_U_BIT, 5f
156 ; We sure are in troubled waters, Flag the error, but to do so
157 ; need to switch to kernel mode stack to call error routine
158 GET_TSK_STACK_BASE r3, sp
160 ; Call printk to shoutout aloud
161 mov r2, 1
162 j print_asid_mismatch
164 5: ; ASIDs match so proceed normally
165 nop
167 #endif
169 .endm
171 ;============================================================================
172 ;TLB Miss handling Code
173 ;============================================================================
175 ;-----------------------------------------------------------------------------
176 ; This macro does the page-table lookup for the faulting address.
177 ; OUT: r0 = PTE faulted on, r1 = ptr to PTE, r2 = Faulting V-address
178 .macro LOAD_FAULT_PTE
180 lr r2, [efa]
182 #ifndef CONFIG_SMP
183 lr r1, [ARC_REG_SCRATCH_DATA0] ; current pgd
184 #else
185 GET_CURR_TASK_ON_CPU r1
186 ld r1, [r1, TASK_ACT_MM]
187 ld r1, [r1, MM_PGD]
188 #endif
190 lsr r0, r2, PGDIR_SHIFT ; Bits for indexing into PGD
191 ld.as r1, [r1, r0] ; PGD entry corresp to faulting addr
192 and.f r1, r1, PAGE_MASK ; Ignoring protection and other flags
193 ; contains Ptr to Page Table
194 bz.d do_slow_path_pf ; if no Page Table, do page fault
196 ; Get the PTE entry: The idea is
197 ; (1) x = addr >> PAGE_SHIFT -> masks page-off bits from @fault-addr
198 ; (2) y = x & (PTRS_PER_PTE - 1) -> to get index
199 ; (3) z = pgtbl[y]
200 ; To avoid the multiply by in end, we do the -2, <<2 below
202 lsr r0, r2, (PAGE_SHIFT - 2)
203 and r0, r0, ( (PTRS_PER_PTE - 1) << 2)
204 ld.aw r0, [r1, r0] ; get PTE and PTE ptr for fault addr
205 #ifdef CONFIG_ARC_DBG_TLB_MISS_COUNT
206 and.f 0, r0, _PAGE_PRESENT
207 bz 1f
208 ld r3, [num_pte_not_present]
209 add r3, r3, 1
210 st r3, [num_pte_not_present]
211 1:
212 #endif
214 .endm
216 ;-----------------------------------------------------------------
217 ; Convert Linux PTE entry into TLB entry
218 ; A one-word PTE entry is programmed as two-word TLB Entry [PD0:PD1] in mmu
219 ; IN: r0 = PTE, r1 = ptr to PTE
221 .macro CONV_PTE_TO_TLB
222 and r3, r0, PTE_BITS_RWX ; r w x
223 lsl r2, r3, 3 ; r w x 0 0 0
224 and.f 0, r0, _PAGE_GLOBAL
225 or.z r2, r2, r3 ; r w x r w x
227 and r3, r0, PTE_BITS_NON_RWX_IN_PD1 ; Extract PFN+cache bits from PTE
228 or r3, r3, r2
230 sr r3, [ARC_REG_TLBPD1] ; these go in PD1
232 and r2, r0, PTE_BITS_IN_PD0 ; Extract other PTE flags: (V)alid, (G)lb
234 lr r3,[ARC_REG_TLBPD0] ; MMU prepares PD0 with vaddr and asid
236 or r3, r3, r2 ; S | vaddr | {sasid|asid}
237 sr r3,[ARC_REG_TLBPD0] ; rewrite PD0
238 .endm
240 ;-----------------------------------------------------------------
241 ; Commit the TLB entry into MMU
243 .macro COMMIT_ENTRY_TO_MMU
245 /* Get free TLB slot: Set = computed from vaddr, way = random */
246 sr TLBGetIndex, [ARC_REG_TLBCOMMAND]
248 /* Commit the Write */
249 #if (CONFIG_ARC_MMU_VER >= 2) /* introduced in v2 */
250 sr TLBWriteNI, [ARC_REG_TLBCOMMAND]
251 #else
252 sr TLBWrite, [ARC_REG_TLBCOMMAND]
253 #endif
254 .endm
257 ARCFP_CODE ;Fast Path Code, candidate for ICCM
259 ;-----------------------------------------------------------------------------
260 ; I-TLB Miss Exception Handler
261 ;-----------------------------------------------------------------------------
263 ARC_ENTRY EV_TLBMissI
265 TLBMISS_FREEUP_REGS
267 #ifdef CONFIG_ARC_DBG_TLB_MISS_COUNT
268 ld r0, [@numitlb]
269 add r0, r0, 1
270 st r0, [@numitlb]
271 #endif
273 ;----------------------------------------------------------------
274 ; Get the PTE corresponding to V-addr accessed, r2 is setup with EFA
275 LOAD_FAULT_PTE
277 ;----------------------------------------------------------------
278 ; VERIFY_PTE: Check if PTE permissions approp for executing code
279 cmp_s r2, VMALLOC_START
280 mov_s r2, (_PAGE_PRESENT | _PAGE_EXECUTE)
281 or.hs r2, r2, _PAGE_GLOBAL
283 and r3, r0, r2 ; Mask out NON Flag bits from PTE
284 xor.f r3, r3, r2 ; check ( ( pte & flags_test ) == flags_test )
285 bnz do_slow_path_pf
287 ; Let Linux VM know that the page was accessed
288 or r0, r0, _PAGE_ACCESSED ; set Accessed Bit
289 st_s r0, [r1] ; Write back PTE
291 CONV_PTE_TO_TLB
292 COMMIT_ENTRY_TO_MMU
293 TLBMISS_RESTORE_REGS
294 rtie
296 ARC_EXIT EV_TLBMissI
298 ;-----------------------------------------------------------------------------
299 ; D-TLB Miss Exception Handler
300 ;-----------------------------------------------------------------------------
302 ARC_ENTRY EV_TLBMissD
304 TLBMISS_FREEUP_REGS
306 #ifdef CONFIG_ARC_DBG_TLB_MISS_COUNT
307 ld r0, [@numdtlb]
308 add r0, r0, 1
309 st r0, [@numdtlb]
310 #endif
312 ;----------------------------------------------------------------
313 ; Get the PTE corresponding to V-addr accessed
314 ; If PTE exists, it will setup, r0 = PTE, r1 = Ptr to PTE, r2 = EFA
315 LOAD_FAULT_PTE
317 ;----------------------------------------------------------------
318 ; VERIFY_PTE: Chk if PTE permissions approp for data access (R/W/R+W)
320 cmp_s r2, VMALLOC_START
321 mov_s r2, _PAGE_PRESENT ; common bit for K/U PTE
322 or.hs r2, r2, _PAGE_GLOBAL ; kernel PTE only
324 ; Linux PTE [RWX] bits are semantically overloaded:
325 ; -If PAGE_GLOBAL set, they refer to kernel-only flags (vmalloc)
326 ; -Otherwise they are user-mode permissions, and those are exactly
327 ; same for kernel mode as well (e.g. copy_(to|from)_user)
329 lr r3, [ecr]
330 btst_s r3, ECR_C_BIT_DTLB_LD_MISS ; Read Access
331 or.nz r2, r2, _PAGE_READ ; chk for Read flag in PTE
332 btst_s r3, ECR_C_BIT_DTLB_ST_MISS ; Write Access
333 or.nz r2, r2, _PAGE_WRITE ; chk for Write flag in PTE
334 ; Above laddering takes care of XCHG access (both R and W)
336 ; By now, r2 setup with all the Flags we need to check in PTE
337 and r3, r0, r2 ; Mask out NON Flag bits from PTE
338 brne.d r3, r2, do_slow_path_pf ; is ((pte & flags_test) == flags_test)
340 ;----------------------------------------------------------------
341 ; UPDATE_PTE: Let Linux VM know that page was accessed/dirty
342 lr r3, [ecr]
343 or r0, r0, _PAGE_ACCESSED ; Accessed bit always
344 btst_s r3, ECR_C_BIT_DTLB_ST_MISS ; See if it was a Write Access ?
345 or.nz r0, r0, _PAGE_MODIFIED ; if Write, set Dirty bit as well
346 st_s r0, [r1] ; Write back PTE
348 CONV_PTE_TO_TLB
350 #if (CONFIG_ARC_MMU_VER == 1)
351 ; MMU with 2 way set assoc J-TLB, needs some help in pathetic case of
352 ; memcpy where 3 parties contend for 2 ways, ensuing a livelock.
353 ; But only for old MMU or one with Metal Fix
354 TLB_WRITE_HEURISTICS
355 #endif
357 COMMIT_ENTRY_TO_MMU
358 TLBMISS_RESTORE_REGS
359 rtie
361 ;-------- Common routine to call Linux Page Fault Handler -----------
362 do_slow_path_pf:
364 ; Restore the 4-scratch regs saved by fast path miss handler
365 TLBMISS_RESTORE_REGS
367 ; Slow path TLB Miss handled as a regular ARC Exception
368 ; (stack switching / save the complete reg-file).
369 EXCEPTION_PROLOGUE
371 ; ------- setup args for Linux Page fault Hanlder ---------
372 mov_s r0, sp
373 lr r1, [efa]
375 ; We don't want exceptions to be disabled while the fault is handled.
376 ; Now that we have saved the context we return from exception hence
377 ; exceptions get re-enable
379 FAKE_RET_FROM_EXCPN r9
381 bl do_page_fault
382 b ret_from_exception
384 ARC_EXIT EV_TLBMissD
386 ARC_ENTRY EV_TLBMissB ; Bogus entry to measure sz of DTLBMiss hdlr