Linux 3.12.28
[linux/fpc-iii.git] / net / wireless / core.c
blob00a65ba3aeaa3061bc4d256239df7b74efd1ecf4
1 /*
2 * This is the linux wireless configuration interface.
4 * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net>
5 */
7 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
9 #include <linux/if.h>
10 #include <linux/module.h>
11 #include <linux/err.h>
12 #include <linux/list.h>
13 #include <linux/slab.h>
14 #include <linux/nl80211.h>
15 #include <linux/debugfs.h>
16 #include <linux/notifier.h>
17 #include <linux/device.h>
18 #include <linux/etherdevice.h>
19 #include <linux/rtnetlink.h>
20 #include <linux/sched.h>
21 #include <net/genetlink.h>
22 #include <net/cfg80211.h>
23 #include "nl80211.h"
24 #include "core.h"
25 #include "sysfs.h"
26 #include "debugfs.h"
27 #include "wext-compat.h"
28 #include "ethtool.h"
29 #include "rdev-ops.h"
31 /* name for sysfs, %d is appended */
32 #define PHY_NAME "phy"
34 MODULE_AUTHOR("Johannes Berg");
35 MODULE_LICENSE("GPL");
36 MODULE_DESCRIPTION("wireless configuration support");
37 MODULE_ALIAS_GENL_FAMILY(NL80211_GENL_NAME);
39 /* RCU-protected (and RTNL for writers) */
40 LIST_HEAD(cfg80211_rdev_list);
41 int cfg80211_rdev_list_generation;
43 /* for debugfs */
44 static struct dentry *ieee80211_debugfs_dir;
46 /* for the cleanup, scan and event works */
47 struct workqueue_struct *cfg80211_wq;
49 static bool cfg80211_disable_40mhz_24ghz;
50 module_param(cfg80211_disable_40mhz_24ghz, bool, 0644);
51 MODULE_PARM_DESC(cfg80211_disable_40mhz_24ghz,
52 "Disable 40MHz support in the 2.4GHz band");
54 struct cfg80211_registered_device *cfg80211_rdev_by_wiphy_idx(int wiphy_idx)
56 struct cfg80211_registered_device *result = NULL, *rdev;
58 ASSERT_RTNL();
60 list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
61 if (rdev->wiphy_idx == wiphy_idx) {
62 result = rdev;
63 break;
67 return result;
70 int get_wiphy_idx(struct wiphy *wiphy)
72 struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
74 return rdev->wiphy_idx;
77 struct wiphy *wiphy_idx_to_wiphy(int wiphy_idx)
79 struct cfg80211_registered_device *rdev;
81 ASSERT_RTNL();
83 rdev = cfg80211_rdev_by_wiphy_idx(wiphy_idx);
84 if (!rdev)
85 return NULL;
86 return &rdev->wiphy;
89 int cfg80211_dev_rename(struct cfg80211_registered_device *rdev,
90 char *newname)
92 struct cfg80211_registered_device *rdev2;
93 int wiphy_idx, taken = -1, result, digits;
95 ASSERT_RTNL();
97 /* prohibit calling the thing phy%d when %d is not its number */
98 sscanf(newname, PHY_NAME "%d%n", &wiphy_idx, &taken);
99 if (taken == strlen(newname) && wiphy_idx != rdev->wiphy_idx) {
100 /* count number of places needed to print wiphy_idx */
101 digits = 1;
102 while (wiphy_idx /= 10)
103 digits++;
105 * deny the name if it is phy<idx> where <idx> is printed
106 * without leading zeroes. taken == strlen(newname) here
108 if (taken == strlen(PHY_NAME) + digits)
109 return -EINVAL;
113 /* Ignore nop renames */
114 if (strcmp(newname, dev_name(&rdev->wiphy.dev)) == 0)
115 return 0;
117 /* Ensure another device does not already have this name. */
118 list_for_each_entry(rdev2, &cfg80211_rdev_list, list)
119 if (strcmp(newname, dev_name(&rdev2->wiphy.dev)) == 0)
120 return -EINVAL;
122 result = device_rename(&rdev->wiphy.dev, newname);
123 if (result)
124 return result;
126 if (rdev->wiphy.debugfsdir &&
127 !debugfs_rename(rdev->wiphy.debugfsdir->d_parent,
128 rdev->wiphy.debugfsdir,
129 rdev->wiphy.debugfsdir->d_parent,
130 newname))
131 pr_err("failed to rename debugfs dir to %s!\n", newname);
133 nl80211_notify_dev_rename(rdev);
135 return 0;
138 int cfg80211_switch_netns(struct cfg80211_registered_device *rdev,
139 struct net *net)
141 struct wireless_dev *wdev;
142 int err = 0;
144 if (!(rdev->wiphy.flags & WIPHY_FLAG_NETNS_OK))
145 return -EOPNOTSUPP;
147 list_for_each_entry(wdev, &rdev->wdev_list, list) {
148 if (!wdev->netdev)
149 continue;
150 wdev->netdev->features &= ~NETIF_F_NETNS_LOCAL;
151 err = dev_change_net_namespace(wdev->netdev, net, "wlan%d");
152 if (err)
153 break;
154 wdev->netdev->features |= NETIF_F_NETNS_LOCAL;
157 if (err) {
158 /* failed -- clean up to old netns */
159 net = wiphy_net(&rdev->wiphy);
161 list_for_each_entry_continue_reverse(wdev, &rdev->wdev_list,
162 list) {
163 if (!wdev->netdev)
164 continue;
165 wdev->netdev->features &= ~NETIF_F_NETNS_LOCAL;
166 err = dev_change_net_namespace(wdev->netdev, net,
167 "wlan%d");
168 WARN_ON(err);
169 wdev->netdev->features |= NETIF_F_NETNS_LOCAL;
172 return err;
175 wiphy_net_set(&rdev->wiphy, net);
177 err = device_rename(&rdev->wiphy.dev, dev_name(&rdev->wiphy.dev));
178 WARN_ON(err);
180 return 0;
183 static void cfg80211_rfkill_poll(struct rfkill *rfkill, void *data)
185 struct cfg80211_registered_device *rdev = data;
187 rdev_rfkill_poll(rdev);
190 void cfg80211_stop_p2p_device(struct cfg80211_registered_device *rdev,
191 struct wireless_dev *wdev)
193 ASSERT_RTNL();
195 if (WARN_ON(wdev->iftype != NL80211_IFTYPE_P2P_DEVICE))
196 return;
198 if (!wdev->p2p_started)
199 return;
201 rdev_stop_p2p_device(rdev, wdev);
202 wdev->p2p_started = false;
204 rdev->opencount--;
206 if (rdev->scan_req && rdev->scan_req->wdev == wdev) {
208 * If the scan request wasn't notified as done, set it
209 * to aborted and leak it after a warning. The driver
210 * should have notified us that it ended at the latest
211 * during rdev_stop_p2p_device().
213 if (WARN_ON(!rdev->scan_req->notified))
214 rdev->scan_req->aborted = true;
215 ___cfg80211_scan_done(rdev, !rdev->scan_req->notified);
219 static int cfg80211_rfkill_set_block(void *data, bool blocked)
221 struct cfg80211_registered_device *rdev = data;
222 struct wireless_dev *wdev;
224 if (!blocked)
225 return 0;
227 rtnl_lock();
229 list_for_each_entry(wdev, &rdev->wdev_list, list) {
230 if (wdev->netdev) {
231 dev_close(wdev->netdev);
232 continue;
234 /* otherwise, check iftype */
235 switch (wdev->iftype) {
236 case NL80211_IFTYPE_P2P_DEVICE:
237 cfg80211_stop_p2p_device(rdev, wdev);
238 break;
239 default:
240 break;
244 rtnl_unlock();
246 return 0;
249 static void cfg80211_rfkill_sync_work(struct work_struct *work)
251 struct cfg80211_registered_device *rdev;
253 rdev = container_of(work, struct cfg80211_registered_device, rfkill_sync);
254 cfg80211_rfkill_set_block(rdev, rfkill_blocked(rdev->rfkill));
257 static void cfg80211_event_work(struct work_struct *work)
259 struct cfg80211_registered_device *rdev;
261 rdev = container_of(work, struct cfg80211_registered_device,
262 event_work);
264 rtnl_lock();
265 cfg80211_process_rdev_events(rdev);
266 rtnl_unlock();
269 /* exported functions */
271 struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv)
273 static atomic_t wiphy_counter = ATOMIC_INIT(0);
275 struct cfg80211_registered_device *rdev;
276 int alloc_size;
278 WARN_ON(ops->add_key && (!ops->del_key || !ops->set_default_key));
279 WARN_ON(ops->auth && (!ops->assoc || !ops->deauth || !ops->disassoc));
280 WARN_ON(ops->connect && !ops->disconnect);
281 WARN_ON(ops->join_ibss && !ops->leave_ibss);
282 WARN_ON(ops->add_virtual_intf && !ops->del_virtual_intf);
283 WARN_ON(ops->add_station && !ops->del_station);
284 WARN_ON(ops->add_mpath && !ops->del_mpath);
285 WARN_ON(ops->join_mesh && !ops->leave_mesh);
287 alloc_size = sizeof(*rdev) + sizeof_priv;
289 rdev = kzalloc(alloc_size, GFP_KERNEL);
290 if (!rdev)
291 return NULL;
293 rdev->ops = ops;
295 rdev->wiphy_idx = atomic_inc_return(&wiphy_counter);
297 if (unlikely(rdev->wiphy_idx < 0)) {
298 /* ugh, wrapped! */
299 atomic_dec(&wiphy_counter);
300 kfree(rdev);
301 return NULL;
304 /* atomic_inc_return makes it start at 1, make it start at 0 */
305 rdev->wiphy_idx--;
307 /* give it a proper name */
308 dev_set_name(&rdev->wiphy.dev, PHY_NAME "%d", rdev->wiphy_idx);
310 INIT_LIST_HEAD(&rdev->wdev_list);
311 INIT_LIST_HEAD(&rdev->beacon_registrations);
312 spin_lock_init(&rdev->beacon_registrations_lock);
313 spin_lock_init(&rdev->bss_lock);
314 INIT_LIST_HEAD(&rdev->bss_list);
315 INIT_WORK(&rdev->scan_done_wk, __cfg80211_scan_done);
316 INIT_WORK(&rdev->sched_scan_results_wk, __cfg80211_sched_scan_results);
317 INIT_DELAYED_WORK(&rdev->dfs_update_channels_wk,
318 cfg80211_dfs_channels_update_work);
319 #ifdef CONFIG_CFG80211_WEXT
320 rdev->wiphy.wext = &cfg80211_wext_handler;
321 #endif
323 device_initialize(&rdev->wiphy.dev);
324 rdev->wiphy.dev.class = &ieee80211_class;
325 rdev->wiphy.dev.platform_data = rdev;
327 #ifdef CONFIG_CFG80211_DEFAULT_PS
328 rdev->wiphy.flags |= WIPHY_FLAG_PS_ON_BY_DEFAULT;
329 #endif
331 wiphy_net_set(&rdev->wiphy, &init_net);
333 rdev->rfkill_ops.set_block = cfg80211_rfkill_set_block;
334 rdev->rfkill = rfkill_alloc(dev_name(&rdev->wiphy.dev),
335 &rdev->wiphy.dev, RFKILL_TYPE_WLAN,
336 &rdev->rfkill_ops, rdev);
338 if (!rdev->rfkill) {
339 kfree(rdev);
340 return NULL;
343 INIT_WORK(&rdev->rfkill_sync, cfg80211_rfkill_sync_work);
344 INIT_WORK(&rdev->conn_work, cfg80211_conn_work);
345 INIT_WORK(&rdev->event_work, cfg80211_event_work);
347 init_waitqueue_head(&rdev->dev_wait);
350 * Initialize wiphy parameters to IEEE 802.11 MIB default values.
351 * Fragmentation and RTS threshold are disabled by default with the
352 * special -1 value.
354 rdev->wiphy.retry_short = 7;
355 rdev->wiphy.retry_long = 4;
356 rdev->wiphy.frag_threshold = (u32) -1;
357 rdev->wiphy.rts_threshold = (u32) -1;
358 rdev->wiphy.coverage_class = 0;
360 rdev->wiphy.features = NL80211_FEATURE_SCAN_FLUSH;
362 return &rdev->wiphy;
364 EXPORT_SYMBOL(wiphy_new);
366 static int wiphy_verify_combinations(struct wiphy *wiphy)
368 const struct ieee80211_iface_combination *c;
369 int i, j;
371 for (i = 0; i < wiphy->n_iface_combinations; i++) {
372 u32 cnt = 0;
373 u16 all_iftypes = 0;
375 c = &wiphy->iface_combinations[i];
378 * Combinations with just one interface aren't real,
379 * however we make an exception for DFS.
381 if (WARN_ON((c->max_interfaces < 2) && !c->radar_detect_widths))
382 return -EINVAL;
384 /* Need at least one channel */
385 if (WARN_ON(!c->num_different_channels))
386 return -EINVAL;
389 * Put a sane limit on maximum number of different
390 * channels to simplify channel accounting code.
392 if (WARN_ON(c->num_different_channels >
393 CFG80211_MAX_NUM_DIFFERENT_CHANNELS))
394 return -EINVAL;
396 /* DFS only works on one channel. */
397 if (WARN_ON(c->radar_detect_widths &&
398 (c->num_different_channels > 1)))
399 return -EINVAL;
401 if (WARN_ON(!c->n_limits))
402 return -EINVAL;
404 for (j = 0; j < c->n_limits; j++) {
405 u16 types = c->limits[j].types;
408 * interface types shouldn't overlap, this is
409 * used in cfg80211_can_change_interface()
411 if (WARN_ON(types & all_iftypes))
412 return -EINVAL;
413 all_iftypes |= types;
415 if (WARN_ON(!c->limits[j].max))
416 return -EINVAL;
418 /* Shouldn't list software iftypes in combinations! */
419 if (WARN_ON(wiphy->software_iftypes & types))
420 return -EINVAL;
422 /* Only a single P2P_DEVICE can be allowed */
423 if (WARN_ON(types & BIT(NL80211_IFTYPE_P2P_DEVICE) &&
424 c->limits[j].max > 1))
425 return -EINVAL;
427 cnt += c->limits[j].max;
429 * Don't advertise an unsupported type
430 * in a combination.
432 if (WARN_ON((wiphy->interface_modes & types) != types))
433 return -EINVAL;
436 /* You can't even choose that many! */
437 if (WARN_ON(cnt < c->max_interfaces))
438 return -EINVAL;
441 return 0;
444 int wiphy_register(struct wiphy *wiphy)
446 struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
447 int res;
448 enum ieee80211_band band;
449 struct ieee80211_supported_band *sband;
450 bool have_band = false;
451 int i;
452 u16 ifmodes = wiphy->interface_modes;
454 /* support for 5/10 MHz is broken due to nl80211 API mess - disable */
455 wiphy->flags &= ~WIPHY_FLAG_SUPPORTS_5_10_MHZ;
457 #ifdef CONFIG_PM
458 if (WARN_ON(wiphy->wowlan &&
459 (wiphy->wowlan->flags & WIPHY_WOWLAN_GTK_REKEY_FAILURE) &&
460 !(wiphy->wowlan->flags & WIPHY_WOWLAN_SUPPORTS_GTK_REKEY)))
461 return -EINVAL;
462 if (WARN_ON(wiphy->wowlan &&
463 !wiphy->wowlan->flags && !wiphy->wowlan->n_patterns &&
464 !wiphy->wowlan->tcp))
465 return -EINVAL;
466 #endif
468 if (WARN_ON(wiphy->coalesce &&
469 (!wiphy->coalesce->n_rules ||
470 !wiphy->coalesce->n_patterns) &&
471 (!wiphy->coalesce->pattern_min_len ||
472 wiphy->coalesce->pattern_min_len >
473 wiphy->coalesce->pattern_max_len)))
474 return -EINVAL;
476 if (WARN_ON(wiphy->ap_sme_capa &&
477 !(wiphy->flags & WIPHY_FLAG_HAVE_AP_SME)))
478 return -EINVAL;
480 if (WARN_ON(wiphy->addresses && !wiphy->n_addresses))
481 return -EINVAL;
483 if (WARN_ON(wiphy->addresses &&
484 !is_zero_ether_addr(wiphy->perm_addr) &&
485 memcmp(wiphy->perm_addr, wiphy->addresses[0].addr,
486 ETH_ALEN)))
487 return -EINVAL;
489 if (WARN_ON(wiphy->max_acl_mac_addrs &&
490 (!(wiphy->flags & WIPHY_FLAG_HAVE_AP_SME) ||
491 !rdev->ops->set_mac_acl)))
492 return -EINVAL;
494 if (wiphy->addresses)
495 memcpy(wiphy->perm_addr, wiphy->addresses[0].addr, ETH_ALEN);
497 /* sanity check ifmodes */
498 WARN_ON(!ifmodes);
499 ifmodes &= ((1 << NUM_NL80211_IFTYPES) - 1) & ~1;
500 if (WARN_ON(ifmodes != wiphy->interface_modes))
501 wiphy->interface_modes = ifmodes;
503 res = wiphy_verify_combinations(wiphy);
504 if (res)
505 return res;
507 /* sanity check supported bands/channels */
508 for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
509 sband = wiphy->bands[band];
510 if (!sband)
511 continue;
513 sband->band = band;
514 if (WARN_ON(!sband->n_channels))
515 return -EINVAL;
517 * on 60gHz band, there are no legacy rates, so
518 * n_bitrates is 0
520 if (WARN_ON(band != IEEE80211_BAND_60GHZ &&
521 !sband->n_bitrates))
522 return -EINVAL;
525 * Since cfg80211_disable_40mhz_24ghz is global, we can
526 * modify the sband's ht data even if the driver uses a
527 * global structure for that.
529 if (cfg80211_disable_40mhz_24ghz &&
530 band == IEEE80211_BAND_2GHZ &&
531 sband->ht_cap.ht_supported) {
532 sband->ht_cap.cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
533 sband->ht_cap.cap &= ~IEEE80211_HT_CAP_SGI_40;
537 * Since we use a u32 for rate bitmaps in
538 * ieee80211_get_response_rate, we cannot
539 * have more than 32 legacy rates.
541 if (WARN_ON(sband->n_bitrates > 32))
542 return -EINVAL;
544 for (i = 0; i < sband->n_channels; i++) {
545 sband->channels[i].orig_flags =
546 sband->channels[i].flags;
547 sband->channels[i].orig_mag = INT_MAX;
548 sband->channels[i].orig_mpwr =
549 sband->channels[i].max_power;
550 sband->channels[i].band = band;
553 have_band = true;
556 if (!have_band) {
557 WARN_ON(1);
558 return -EINVAL;
561 #ifdef CONFIG_PM
562 if (WARN_ON(rdev->wiphy.wowlan && rdev->wiphy.wowlan->n_patterns &&
563 (!rdev->wiphy.wowlan->pattern_min_len ||
564 rdev->wiphy.wowlan->pattern_min_len >
565 rdev->wiphy.wowlan->pattern_max_len)))
566 return -EINVAL;
567 #endif
569 /* check and set up bitrates */
570 ieee80211_set_bitrate_flags(wiphy);
572 rtnl_lock();
573 res = device_add(&rdev->wiphy.dev);
574 if (res) {
575 rtnl_unlock();
576 return res;
579 /* set up regulatory info */
580 wiphy_regulatory_register(wiphy);
582 list_add_rcu(&rdev->list, &cfg80211_rdev_list);
583 cfg80211_rdev_list_generation++;
585 /* add to debugfs */
586 rdev->wiphy.debugfsdir =
587 debugfs_create_dir(wiphy_name(&rdev->wiphy),
588 ieee80211_debugfs_dir);
589 if (IS_ERR(rdev->wiphy.debugfsdir))
590 rdev->wiphy.debugfsdir = NULL;
592 if (wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY) {
593 struct regulatory_request request;
595 request.wiphy_idx = get_wiphy_idx(wiphy);
596 request.initiator = NL80211_REGDOM_SET_BY_DRIVER;
597 request.alpha2[0] = '9';
598 request.alpha2[1] = '9';
600 nl80211_send_reg_change_event(&request);
603 cfg80211_debugfs_rdev_add(rdev);
605 rdev->wiphy.registered = true;
606 rtnl_unlock();
608 res = rfkill_register(rdev->rfkill);
609 if (res) {
610 rfkill_destroy(rdev->rfkill);
611 rdev->rfkill = NULL;
612 wiphy_unregister(&rdev->wiphy);
613 return res;
616 return 0;
618 EXPORT_SYMBOL(wiphy_register);
620 void wiphy_rfkill_start_polling(struct wiphy *wiphy)
622 struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
624 if (!rdev->ops->rfkill_poll)
625 return;
626 rdev->rfkill_ops.poll = cfg80211_rfkill_poll;
627 rfkill_resume_polling(rdev->rfkill);
629 EXPORT_SYMBOL(wiphy_rfkill_start_polling);
631 void wiphy_rfkill_stop_polling(struct wiphy *wiphy)
633 struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
635 rfkill_pause_polling(rdev->rfkill);
637 EXPORT_SYMBOL(wiphy_rfkill_stop_polling);
639 void wiphy_unregister(struct wiphy *wiphy)
641 struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
643 wait_event(rdev->dev_wait, ({
644 int __count;
645 rtnl_lock();
646 __count = rdev->opencount;
647 rtnl_unlock();
648 __count == 0; }));
650 if (rdev->rfkill)
651 rfkill_unregister(rdev->rfkill);
653 rtnl_lock();
654 rdev->wiphy.registered = false;
656 BUG_ON(!list_empty(&rdev->wdev_list));
659 * First remove the hardware from everywhere, this makes
660 * it impossible to find from userspace.
662 debugfs_remove_recursive(rdev->wiphy.debugfsdir);
663 list_del_rcu(&rdev->list);
664 synchronize_rcu();
667 * If this device got a regulatory hint tell core its
668 * free to listen now to a new shiny device regulatory hint
670 wiphy_regulatory_deregister(wiphy);
672 cfg80211_rdev_list_generation++;
673 device_del(&rdev->wiphy.dev);
675 rtnl_unlock();
677 flush_work(&rdev->scan_done_wk);
678 cancel_work_sync(&rdev->conn_work);
679 flush_work(&rdev->event_work);
680 cancel_delayed_work_sync(&rdev->dfs_update_channels_wk);
682 #ifdef CONFIG_PM
683 if (rdev->wiphy.wowlan_config && rdev->ops->set_wakeup)
684 rdev_set_wakeup(rdev, false);
685 #endif
686 cfg80211_rdev_free_wowlan(rdev);
687 cfg80211_rdev_free_coalesce(rdev);
689 EXPORT_SYMBOL(wiphy_unregister);
691 void cfg80211_dev_free(struct cfg80211_registered_device *rdev)
693 struct cfg80211_internal_bss *scan, *tmp;
694 struct cfg80211_beacon_registration *reg, *treg;
695 rfkill_destroy(rdev->rfkill);
696 list_for_each_entry_safe(reg, treg, &rdev->beacon_registrations, list) {
697 list_del(&reg->list);
698 kfree(reg);
700 list_for_each_entry_safe(scan, tmp, &rdev->bss_list, list)
701 cfg80211_put_bss(&rdev->wiphy, &scan->pub);
702 kfree(rdev);
705 void wiphy_free(struct wiphy *wiphy)
707 put_device(&wiphy->dev);
709 EXPORT_SYMBOL(wiphy_free);
711 void wiphy_rfkill_set_hw_state(struct wiphy *wiphy, bool blocked)
713 struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
715 if (rfkill_set_hw_state(rdev->rfkill, blocked))
716 schedule_work(&rdev->rfkill_sync);
718 EXPORT_SYMBOL(wiphy_rfkill_set_hw_state);
720 void cfg80211_unregister_wdev(struct wireless_dev *wdev)
722 struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
724 ASSERT_RTNL();
726 if (WARN_ON(wdev->netdev))
727 return;
729 list_del_rcu(&wdev->list);
730 rdev->devlist_generation++;
732 switch (wdev->iftype) {
733 case NL80211_IFTYPE_P2P_DEVICE:
734 cfg80211_stop_p2p_device(rdev, wdev);
735 break;
736 default:
737 WARN_ON_ONCE(1);
738 break;
741 EXPORT_SYMBOL(cfg80211_unregister_wdev);
743 static struct device_type wiphy_type = {
744 .name = "wlan",
747 void cfg80211_update_iface_num(struct cfg80211_registered_device *rdev,
748 enum nl80211_iftype iftype, int num)
750 ASSERT_RTNL();
752 rdev->num_running_ifaces += num;
753 if (iftype == NL80211_IFTYPE_MONITOR)
754 rdev->num_running_monitor_ifaces += num;
757 void cfg80211_leave(struct cfg80211_registered_device *rdev,
758 struct wireless_dev *wdev)
760 struct net_device *dev = wdev->netdev;
762 switch (wdev->iftype) {
763 case NL80211_IFTYPE_ADHOC:
764 cfg80211_leave_ibss(rdev, dev, true);
765 break;
766 case NL80211_IFTYPE_P2P_CLIENT:
767 case NL80211_IFTYPE_STATION:
768 __cfg80211_stop_sched_scan(rdev, false);
770 wdev_lock(wdev);
771 #ifdef CONFIG_CFG80211_WEXT
772 kfree(wdev->wext.ie);
773 wdev->wext.ie = NULL;
774 wdev->wext.ie_len = 0;
775 wdev->wext.connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC;
776 #endif
777 cfg80211_disconnect(rdev, dev,
778 WLAN_REASON_DEAUTH_LEAVING, true);
779 wdev_unlock(wdev);
780 break;
781 case NL80211_IFTYPE_MESH_POINT:
782 cfg80211_leave_mesh(rdev, dev);
783 break;
784 case NL80211_IFTYPE_AP:
785 case NL80211_IFTYPE_P2P_GO:
786 cfg80211_stop_ap(rdev, dev);
787 break;
788 default:
789 break;
792 wdev->beacon_interval = 0;
795 static int cfg80211_netdev_notifier_call(struct notifier_block *nb,
796 unsigned long state, void *ptr)
798 struct net_device *dev = netdev_notifier_info_to_dev(ptr);
799 struct wireless_dev *wdev = dev->ieee80211_ptr;
800 struct cfg80211_registered_device *rdev;
801 int ret;
803 if (!wdev)
804 return NOTIFY_DONE;
806 rdev = wiphy_to_dev(wdev->wiphy);
808 WARN_ON(wdev->iftype == NL80211_IFTYPE_UNSPECIFIED);
810 switch (state) {
811 case NETDEV_POST_INIT:
812 SET_NETDEV_DEVTYPE(dev, &wiphy_type);
813 break;
814 case NETDEV_REGISTER:
816 * NB: cannot take rdev->mtx here because this may be
817 * called within code protected by it when interfaces
818 * are added with nl80211.
820 mutex_init(&wdev->mtx);
821 INIT_LIST_HEAD(&wdev->event_list);
822 spin_lock_init(&wdev->event_lock);
823 INIT_LIST_HEAD(&wdev->mgmt_registrations);
824 spin_lock_init(&wdev->mgmt_registrations_lock);
826 wdev->identifier = ++rdev->wdev_id;
827 list_add_rcu(&wdev->list, &rdev->wdev_list);
828 rdev->devlist_generation++;
829 /* can only change netns with wiphy */
830 dev->features |= NETIF_F_NETNS_LOCAL;
832 if (sysfs_create_link(&dev->dev.kobj, &rdev->wiphy.dev.kobj,
833 "phy80211")) {
834 pr_err("failed to add phy80211 symlink to netdev!\n");
836 wdev->netdev = dev;
837 #ifdef CONFIG_CFG80211_WEXT
838 wdev->wext.default_key = -1;
839 wdev->wext.default_mgmt_key = -1;
840 wdev->wext.connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC;
841 #endif
843 if (wdev->wiphy->flags & WIPHY_FLAG_PS_ON_BY_DEFAULT)
844 wdev->ps = true;
845 else
846 wdev->ps = false;
847 /* allow mac80211 to determine the timeout */
848 wdev->ps_timeout = -1;
850 netdev_set_default_ethtool_ops(dev, &cfg80211_ethtool_ops);
852 if ((wdev->iftype == NL80211_IFTYPE_STATION ||
853 wdev->iftype == NL80211_IFTYPE_P2P_CLIENT ||
854 wdev->iftype == NL80211_IFTYPE_ADHOC) && !wdev->use_4addr)
855 dev->priv_flags |= IFF_DONT_BRIDGE;
856 break;
857 case NETDEV_GOING_DOWN:
858 cfg80211_leave(rdev, wdev);
859 break;
860 case NETDEV_DOWN:
861 cfg80211_update_iface_num(rdev, wdev->iftype, -1);
862 if (rdev->scan_req && rdev->scan_req->wdev == wdev) {
863 if (WARN_ON(!rdev->scan_req->notified))
864 rdev->scan_req->aborted = true;
865 ___cfg80211_scan_done(rdev, true);
868 if (WARN_ON(rdev->sched_scan_req &&
869 rdev->sched_scan_req->dev == wdev->netdev)) {
870 __cfg80211_stop_sched_scan(rdev, false);
873 rdev->opencount--;
874 wake_up(&rdev->dev_wait);
875 break;
876 case NETDEV_UP:
877 cfg80211_update_iface_num(rdev, wdev->iftype, 1);
878 wdev_lock(wdev);
879 switch (wdev->iftype) {
880 #ifdef CONFIG_CFG80211_WEXT
881 case NL80211_IFTYPE_ADHOC:
882 cfg80211_ibss_wext_join(rdev, wdev);
883 break;
884 case NL80211_IFTYPE_STATION:
885 cfg80211_mgd_wext_connect(rdev, wdev);
886 break;
887 #endif
888 #ifdef CONFIG_MAC80211_MESH
889 case NL80211_IFTYPE_MESH_POINT:
891 /* backward compat code... */
892 struct mesh_setup setup;
893 memcpy(&setup, &default_mesh_setup,
894 sizeof(setup));
895 /* back compat only needed for mesh_id */
896 setup.mesh_id = wdev->ssid;
897 setup.mesh_id_len = wdev->mesh_id_up_len;
898 if (wdev->mesh_id_up_len)
899 __cfg80211_join_mesh(rdev, dev,
900 &setup,
901 &default_mesh_config);
902 break;
904 #endif
905 default:
906 break;
908 wdev_unlock(wdev);
909 rdev->opencount++;
912 * Configure power management to the driver here so that its
913 * correctly set also after interface type changes etc.
915 if ((wdev->iftype == NL80211_IFTYPE_STATION ||
916 wdev->iftype == NL80211_IFTYPE_P2P_CLIENT) &&
917 rdev->ops->set_power_mgmt)
918 if (rdev_set_power_mgmt(rdev, dev, wdev->ps,
919 wdev->ps_timeout)) {
920 /* assume this means it's off */
921 wdev->ps = false;
923 break;
924 case NETDEV_UNREGISTER:
926 * It is possible to get NETDEV_UNREGISTER
927 * multiple times. To detect that, check
928 * that the interface is still on the list
929 * of registered interfaces, and only then
930 * remove and clean it up.
932 if (!list_empty(&wdev->list)) {
933 sysfs_remove_link(&dev->dev.kobj, "phy80211");
934 list_del_rcu(&wdev->list);
935 rdev->devlist_generation++;
936 cfg80211_mlme_purge_registrations(wdev);
937 #ifdef CONFIG_CFG80211_WEXT
938 kfree(wdev->wext.keys);
939 #endif
942 * synchronise (so that we won't find this netdev
943 * from other code any more) and then clear the list
944 * head so that the above code can safely check for
945 * !list_empty() to avoid double-cleanup.
947 synchronize_rcu();
948 INIT_LIST_HEAD(&wdev->list);
950 * Ensure that all events have been processed and
951 * freed.
953 cfg80211_process_wdev_events(wdev);
955 if (WARN_ON(wdev->current_bss)) {
956 cfg80211_unhold_bss(wdev->current_bss);
957 cfg80211_put_bss(wdev->wiphy, &wdev->current_bss->pub);
958 wdev->current_bss = NULL;
960 break;
961 case NETDEV_PRE_UP:
962 if (!(wdev->wiphy->interface_modes & BIT(wdev->iftype)))
963 return notifier_from_errno(-EOPNOTSUPP);
964 ret = cfg80211_can_add_interface(rdev, wdev->iftype);
965 if (ret)
966 return notifier_from_errno(ret);
967 break;
970 return NOTIFY_DONE;
973 static struct notifier_block cfg80211_netdev_notifier = {
974 .notifier_call = cfg80211_netdev_notifier_call,
977 static void __net_exit cfg80211_pernet_exit(struct net *net)
979 struct cfg80211_registered_device *rdev;
981 rtnl_lock();
982 list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
983 if (net_eq(wiphy_net(&rdev->wiphy), net))
984 WARN_ON(cfg80211_switch_netns(rdev, &init_net));
986 rtnl_unlock();
989 static struct pernet_operations cfg80211_pernet_ops = {
990 .exit = cfg80211_pernet_exit,
993 static int __init cfg80211_init(void)
995 int err;
997 err = register_pernet_device(&cfg80211_pernet_ops);
998 if (err)
999 goto out_fail_pernet;
1001 err = wiphy_sysfs_init();
1002 if (err)
1003 goto out_fail_sysfs;
1005 err = register_netdevice_notifier(&cfg80211_netdev_notifier);
1006 if (err)
1007 goto out_fail_notifier;
1009 err = nl80211_init();
1010 if (err)
1011 goto out_fail_nl80211;
1013 ieee80211_debugfs_dir = debugfs_create_dir("ieee80211", NULL);
1015 err = regulatory_init();
1016 if (err)
1017 goto out_fail_reg;
1019 cfg80211_wq = create_singlethread_workqueue("cfg80211");
1020 if (!cfg80211_wq) {
1021 err = -ENOMEM;
1022 goto out_fail_wq;
1025 return 0;
1027 out_fail_wq:
1028 regulatory_exit();
1029 out_fail_reg:
1030 debugfs_remove(ieee80211_debugfs_dir);
1031 out_fail_nl80211:
1032 unregister_netdevice_notifier(&cfg80211_netdev_notifier);
1033 out_fail_notifier:
1034 wiphy_sysfs_exit();
1035 out_fail_sysfs:
1036 unregister_pernet_device(&cfg80211_pernet_ops);
1037 out_fail_pernet:
1038 return err;
1040 subsys_initcall(cfg80211_init);
1042 static void __exit cfg80211_exit(void)
1044 debugfs_remove(ieee80211_debugfs_dir);
1045 nl80211_exit();
1046 unregister_netdevice_notifier(&cfg80211_netdev_notifier);
1047 wiphy_sysfs_exit();
1048 regulatory_exit();
1049 unregister_pernet_device(&cfg80211_pernet_ops);
1050 destroy_workqueue(cfg80211_wq);
1052 module_exit(cfg80211_exit);