iwlwifi: introduce host commands callbacks
[linux/fpc-iii.git] / drivers / ata / pata_platform.c
blobaad7adc6ea564c9f50dbbcf443ce1396fdbf7593
1 /*
2 * Generic platform device PATA driver
4 * Copyright (C) 2006 - 2007 Paul Mundt
6 * Based on pata_pcmcia:
8 * Copyright 2005-2006 Red Hat Inc <alan@redhat.com>, all rights reserved.
10 * This file is subject to the terms and conditions of the GNU General Public
11 * License. See the file "COPYING" in the main directory of this archive
12 * for more details.
14 #include <linux/kernel.h>
15 #include <linux/module.h>
16 #include <linux/init.h>
17 #include <linux/blkdev.h>
18 #include <scsi/scsi_host.h>
19 #include <linux/ata.h>
20 #include <linux/libata.h>
21 #include <linux/platform_device.h>
22 #include <linux/ata_platform.h>
24 #define DRV_NAME "pata_platform"
25 #define DRV_VERSION "1.2"
27 static int pio_mask = 1;
30 * Provide our own set_mode() as we don't want to change anything that has
31 * already been configured..
33 static int pata_platform_set_mode(struct ata_link *link, struct ata_device **unused)
35 struct ata_device *dev;
37 ata_link_for_each_dev(dev, link) {
38 if (ata_dev_enabled(dev)) {
39 /* We don't really care */
40 dev->pio_mode = dev->xfer_mode = XFER_PIO_0;
41 dev->xfer_shift = ATA_SHIFT_PIO;
42 dev->flags |= ATA_DFLAG_PIO;
43 ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
46 return 0;
49 static int ata_dummy_ret0(struct ata_port *ap) { return 0; }
51 static struct scsi_host_template pata_platform_sht = {
52 .module = THIS_MODULE,
53 .name = DRV_NAME,
54 .ioctl = ata_scsi_ioctl,
55 .queuecommand = ata_scsi_queuecmd,
56 .can_queue = ATA_DEF_QUEUE,
57 .this_id = ATA_SHT_THIS_ID,
58 .sg_tablesize = LIBATA_MAX_PRD,
59 .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
60 .emulated = ATA_SHT_EMULATED,
61 .use_clustering = ATA_SHT_USE_CLUSTERING,
62 .proc_name = DRV_NAME,
63 .dma_boundary = ATA_DMA_BOUNDARY,
64 .slave_configure = ata_scsi_slave_config,
65 .slave_destroy = ata_scsi_slave_destroy,
66 .bios_param = ata_std_bios_param,
69 static struct ata_port_operations pata_platform_port_ops = {
70 .set_mode = pata_platform_set_mode,
72 .tf_load = ata_tf_load,
73 .tf_read = ata_tf_read,
74 .check_status = ata_check_status,
75 .exec_command = ata_exec_command,
76 .dev_select = ata_std_dev_select,
78 .freeze = ata_bmdma_freeze,
79 .thaw = ata_bmdma_thaw,
80 .error_handler = ata_bmdma_error_handler,
81 .post_internal_cmd = ata_bmdma_post_internal_cmd,
82 .cable_detect = ata_cable_unknown,
84 .qc_prep = ata_qc_prep,
85 .qc_issue = ata_qc_issue_prot,
87 .data_xfer = ata_data_xfer_noirq,
89 .irq_clear = ata_bmdma_irq_clear,
90 .irq_on = ata_irq_on,
92 .port_start = ata_dummy_ret0,
95 static void pata_platform_setup_port(struct ata_ioports *ioaddr,
96 unsigned int shift)
98 /* Fixup the port shift for platforms that need it */
99 ioaddr->data_addr = ioaddr->cmd_addr + (ATA_REG_DATA << shift);
100 ioaddr->error_addr = ioaddr->cmd_addr + (ATA_REG_ERR << shift);
101 ioaddr->feature_addr = ioaddr->cmd_addr + (ATA_REG_FEATURE << shift);
102 ioaddr->nsect_addr = ioaddr->cmd_addr + (ATA_REG_NSECT << shift);
103 ioaddr->lbal_addr = ioaddr->cmd_addr + (ATA_REG_LBAL << shift);
104 ioaddr->lbam_addr = ioaddr->cmd_addr + (ATA_REG_LBAM << shift);
105 ioaddr->lbah_addr = ioaddr->cmd_addr + (ATA_REG_LBAH << shift);
106 ioaddr->device_addr = ioaddr->cmd_addr + (ATA_REG_DEVICE << shift);
107 ioaddr->status_addr = ioaddr->cmd_addr + (ATA_REG_STATUS << shift);
108 ioaddr->command_addr = ioaddr->cmd_addr + (ATA_REG_CMD << shift);
112 * __pata_platform_probe - attach a platform interface
113 * @dev: device
114 * @io_res: Resource representing I/O base
115 * @ctl_res: Resource representing CTL base
116 * @irq_res: Resource representing IRQ and its flags
117 * @ioport_shift: I/O port shift
118 * @__pio_mask: PIO mask
120 * Register a platform bus IDE interface. Such interfaces are PIO and we
121 * assume do not support IRQ sharing.
123 * Platform devices are expected to contain at least 2 resources per port:
125 * - I/O Base (IORESOURCE_IO or IORESOURCE_MEM)
126 * - CTL Base (IORESOURCE_IO or IORESOURCE_MEM)
128 * and optionally:
130 * - IRQ (IORESOURCE_IRQ)
132 * If the base resources are both mem types, the ioremap() is handled
133 * here. For IORESOURCE_IO, it's assumed that there's no remapping
134 * necessary.
136 * If no IRQ resource is present, PIO polling mode is used instead.
138 int __devinit __pata_platform_probe(struct device *dev,
139 struct resource *io_res,
140 struct resource *ctl_res,
141 struct resource *irq_res,
142 unsigned int ioport_shift,
143 int __pio_mask)
145 struct ata_host *host;
146 struct ata_port *ap;
147 unsigned int mmio;
148 int irq = 0;
149 int irq_flags = 0;
152 * Check for MMIO
154 mmio = (( io_res->flags == IORESOURCE_MEM) &&
155 (ctl_res->flags == IORESOURCE_MEM));
158 * And the IRQ
160 if (irq_res && irq_res->start > 0) {
161 irq = irq_res->start;
162 irq_flags = irq_res->flags;
166 * Now that that's out of the way, wire up the port..
168 host = ata_host_alloc(dev, 1);
169 if (!host)
170 return -ENOMEM;
171 ap = host->ports[0];
173 ap->ops = &pata_platform_port_ops;
174 ap->pio_mask = __pio_mask;
175 ap->flags |= ATA_FLAG_SLAVE_POSS;
178 * Use polling mode if there's no IRQ
180 if (!irq) {
181 ap->flags |= ATA_FLAG_PIO_POLLING;
182 ata_port_desc(ap, "no IRQ, using PIO polling");
186 * Handle the MMIO case
188 if (mmio) {
189 ap->ioaddr.cmd_addr = devm_ioremap(dev, io_res->start,
190 io_res->end - io_res->start + 1);
191 ap->ioaddr.ctl_addr = devm_ioremap(dev, ctl_res->start,
192 ctl_res->end - ctl_res->start + 1);
193 } else {
194 ap->ioaddr.cmd_addr = devm_ioport_map(dev, io_res->start,
195 io_res->end - io_res->start + 1);
196 ap->ioaddr.ctl_addr = devm_ioport_map(dev, ctl_res->start,
197 ctl_res->end - ctl_res->start + 1);
199 if (!ap->ioaddr.cmd_addr || !ap->ioaddr.ctl_addr) {
200 dev_err(dev, "failed to map IO/CTL base\n");
201 return -ENOMEM;
204 ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
206 pata_platform_setup_port(&ap->ioaddr, ioport_shift);
208 ata_port_desc(ap, "%s cmd 0x%llx ctl 0x%llx", mmio ? "mmio" : "ioport",
209 (unsigned long long)io_res->start,
210 (unsigned long long)ctl_res->start);
212 /* activate */
213 return ata_host_activate(host, irq, irq ? ata_interrupt : NULL,
214 irq_flags, &pata_platform_sht);
216 EXPORT_SYMBOL_GPL(__pata_platform_probe);
219 * __pata_platform_remove - unplug a platform interface
220 * @dev: device
222 * A platform bus ATA device has been unplugged. Perform the needed
223 * cleanup. Also called on module unload for any active devices.
225 int __devexit __pata_platform_remove(struct device *dev)
227 struct ata_host *host = dev_get_drvdata(dev);
229 ata_host_detach(host);
231 return 0;
233 EXPORT_SYMBOL_GPL(__pata_platform_remove);
235 static int __devinit pata_platform_probe(struct platform_device *pdev)
237 struct resource *io_res;
238 struct resource *ctl_res;
239 struct resource *irq_res;
240 struct pata_platform_info *pp_info = pdev->dev.platform_data;
243 * Simple resource validation ..
245 if ((pdev->num_resources != 3) && (pdev->num_resources != 2)) {
246 dev_err(&pdev->dev, "invalid number of resources\n");
247 return -EINVAL;
251 * Get the I/O base first
253 io_res = platform_get_resource(pdev, IORESOURCE_IO, 0);
254 if (io_res == NULL) {
255 io_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
256 if (unlikely(io_res == NULL))
257 return -EINVAL;
261 * Then the CTL base
263 ctl_res = platform_get_resource(pdev, IORESOURCE_IO, 1);
264 if (ctl_res == NULL) {
265 ctl_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
266 if (unlikely(ctl_res == NULL))
267 return -EINVAL;
271 * And the IRQ
273 irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
274 if (irq_res)
275 irq_res->flags = pp_info ? pp_info->irq_flags : 0;
277 return __pata_platform_probe(&pdev->dev, io_res, ctl_res, irq_res,
278 pp_info ? pp_info->ioport_shift : 0,
279 pio_mask);
282 static int __devexit pata_platform_remove(struct platform_device *pdev)
284 return __pata_platform_remove(&pdev->dev);
287 static struct platform_driver pata_platform_driver = {
288 .probe = pata_platform_probe,
289 .remove = __devexit_p(pata_platform_remove),
290 .driver = {
291 .name = DRV_NAME,
292 .owner = THIS_MODULE,
296 static int __init pata_platform_init(void)
298 return platform_driver_register(&pata_platform_driver);
301 static void __exit pata_platform_exit(void)
303 platform_driver_unregister(&pata_platform_driver);
305 module_init(pata_platform_init);
306 module_exit(pata_platform_exit);
308 module_param(pio_mask, int, 0);
310 MODULE_AUTHOR("Paul Mundt");
311 MODULE_DESCRIPTION("low-level driver for platform device ATA");
312 MODULE_LICENSE("GPL");
313 MODULE_VERSION(DRV_VERSION);