2 * Touchscreen driver for Sharp SL-C7xx and SL-Cxx00 models
4 * Copyright (c) 2004-2005 Richard Purdie
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
13 #include <linux/delay.h>
14 #include <linux/platform_device.h>
15 #include <linux/init.h>
16 #include <linux/input.h>
17 #include <linux/interrupt.h>
18 #include <linux/module.h>
19 #include <linux/slab.h>
20 #include <linux/irq.h>
22 #include <asm/arch/sharpsl.h>
23 #include <asm/arch/hardware.h>
24 #include <asm/arch/pxa-regs.h>
27 #define PWR_MODE_ACTIVE 0
28 #define PWR_MODE_SUSPEND 1
30 #define X_AXIS_MAX 3830
31 #define X_AXIS_MIN 150
32 #define Y_AXIS_MAX 3830
33 #define Y_AXIS_MIN 190
34 #define PRESSURE_MIN 0
35 #define PRESSURE_MAX 15000
44 struct input_dev
*input
;
45 struct timer_list timer
;
50 struct corgits_machinfo
*machinfo
;
54 #define CCNT(a) asm volatile ("mrc p14, 0, %0, C1, C0, 0" : "=r"(a))
55 #define PMNC_GET(x) asm volatile ("mrc p14, 0, %0, C0, C0, 0" : "=r"(x))
56 #define PMNC_SET(x) asm volatile ("mcr p14, 0, %0, C0, C0, 0" : : "r"(x))
59 #define CCNT(a) asm volatile ("mrc p14, 0, %0, C1, C1, 0" : "=r"(a))
60 #define PMNC_GET(x) asm volatile ("mrc p14, 0, %0, C0, C1, 0" : "=r"(x))
61 #define PMNC_SET(x) asm volatile ("mcr p14, 0, %0, C0, C1, 0" : : "r"(x))
64 /* ADS7846 Touch Screen Controller bit definitions */
65 #define ADSCTRL_PD0 (1u << 0) /* PD0 */
66 #define ADSCTRL_PD1 (1u << 1) /* PD1 */
67 #define ADSCTRL_DFR (1u << 2) /* SER/DFR */
68 #define ADSCTRL_MOD (1u << 3) /* Mode */
69 #define ADSCTRL_ADR_SH 4 /* Address setting */
70 #define ADSCTRL_STS (1u << 7) /* Start Bit */
72 /* External Functions */
73 extern unsigned int get_clk_frequency_khz(int info
);
75 static unsigned long calc_waittime(struct corgi_ts
*corgi_ts
)
77 unsigned long hsync_invperiod
= corgi_ts
->machinfo
->get_hsync_invperiod();
80 return get_clk_frequency_khz(0)*1000/hsync_invperiod
;
85 static int sync_receive_data_send_cmd(struct corgi_ts
*corgi_ts
, int doRecive
, int doSend
,
86 unsigned int address
, unsigned long wait_time
)
88 unsigned long timer1
= 0, timer2
, pmnc
= 0;
91 if (wait_time
&& doSend
) {
97 corgi_ts
->machinfo
->wait_hsync();
103 pos
= corgi_ssp_ads7846_get();
106 int cmd
= ADSCTRL_PD0
| ADSCTRL_PD1
| (address
<< ADSCTRL_ADR_SH
) | ADSCTRL_STS
;
108 corgi_ssp_ads7846_put(cmd
);
109 corgi_ssp_ads7846_get();
112 /* Wait after HSync */
114 if (timer2
-timer1
> wait_time
) {
115 /* too slow - timeout, try again */
116 corgi_ts
->machinfo
->wait_hsync();
119 /* Wait after HSync */
122 while (timer2
- timer1
< wait_time
)
125 corgi_ssp_ads7846_put(cmd
);
126 if (wait_time
&& !(pmnc
& 0x01))
132 static int read_xydata(struct corgi_ts
*corgi_ts
)
134 unsigned int x
, y
, z1
, z2
;
135 unsigned long flags
, wait_time
;
137 /* critical section */
138 local_irq_save(flags
);
139 corgi_ssp_ads7846_lock();
140 wait_time
= calc_waittime(corgi_ts
);
143 sync_receive_data_send_cmd(corgi_ts
, 0, 1, 1u, wait_time
);
146 sync_receive_data_send_cmd(corgi_ts
, 1, 1, 1u, wait_time
);
149 y
= sync_receive_data_send_cmd(corgi_ts
, 1, 1, 5u, wait_time
);
152 x
= sync_receive_data_send_cmd(corgi_ts
, 1, 1, 3u, wait_time
);
155 z1
= sync_receive_data_send_cmd(corgi_ts
, 1, 1, 4u, wait_time
);
156 z2
= sync_receive_data_send_cmd(corgi_ts
, 1, 0, 4u, wait_time
);
158 /* Power-Down Enable */
159 corgi_ssp_ads7846_put((1u << ADSCTRL_ADR_SH
) | ADSCTRL_STS
);
160 corgi_ssp_ads7846_get();
162 corgi_ssp_ads7846_unlock();
163 local_irq_restore(flags
);
165 if (x
== 0 || y
== 0 || z1
== 0 || (x
* (z2
- z1
) / z1
) >= 15000) {
166 corgi_ts
->tc
.pressure
= 0;
172 corgi_ts
->tc
.pressure
= (x
* (z2
- z1
)) / z1
;
176 static void new_data(struct corgi_ts
*corgi_ts
)
178 struct input_dev
*dev
= corgi_ts
->input
;
180 if (corgi_ts
->power_mode
!= PWR_MODE_ACTIVE
)
183 if (!corgi_ts
->tc
.pressure
&& corgi_ts
->pendown
== 0)
186 input_report_abs(dev
, ABS_X
, corgi_ts
->tc
.x
);
187 input_report_abs(dev
, ABS_Y
, corgi_ts
->tc
.y
);
188 input_report_abs(dev
, ABS_PRESSURE
, corgi_ts
->tc
.pressure
);
189 input_report_key(dev
, BTN_TOUCH
, corgi_ts
->pendown
);
193 static void ts_interrupt_main(struct corgi_ts
*corgi_ts
, int isTimer
)
195 if ((GPLR(IRQ_TO_GPIO(corgi_ts
->irq_gpio
)) & GPIO_bit(IRQ_TO_GPIO(corgi_ts
->irq_gpio
))) == 0) {
196 /* Disable Interrupt */
197 set_irq_type(corgi_ts
->irq_gpio
, IRQT_NOEDGE
);
198 if (read_xydata(corgi_ts
)) {
199 corgi_ts
->pendown
= 1;
202 mod_timer(&corgi_ts
->timer
, jiffies
+ HZ
/ 100);
204 if (corgi_ts
->pendown
== 1 || corgi_ts
->pendown
== 2) {
205 mod_timer(&corgi_ts
->timer
, jiffies
+ HZ
/ 100);
210 if (corgi_ts
->pendown
) {
211 corgi_ts
->tc
.pressure
= 0;
215 /* Enable Falling Edge */
216 set_irq_type(corgi_ts
->irq_gpio
, IRQT_FALLING
);
217 corgi_ts
->pendown
= 0;
221 static void corgi_ts_timer(unsigned long data
)
223 struct corgi_ts
*corgits_data
= (struct corgi_ts
*) data
;
225 ts_interrupt_main(corgits_data
, 1);
228 static irqreturn_t
ts_interrupt(int irq
, void *dev_id
)
230 struct corgi_ts
*corgits_data
= dev_id
;
232 ts_interrupt_main(corgits_data
, 0);
237 static int corgits_suspend(struct platform_device
*dev
, pm_message_t state
)
239 struct corgi_ts
*corgi_ts
= platform_get_drvdata(dev
);
241 if (corgi_ts
->pendown
) {
242 del_timer_sync(&corgi_ts
->timer
);
243 corgi_ts
->tc
.pressure
= 0;
245 corgi_ts
->pendown
= 0;
247 corgi_ts
->power_mode
= PWR_MODE_SUSPEND
;
249 corgi_ssp_ads7846_putget((1u << ADSCTRL_ADR_SH
) | ADSCTRL_STS
);
254 static int corgits_resume(struct platform_device
*dev
)
256 struct corgi_ts
*corgi_ts
= platform_get_drvdata(dev
);
258 corgi_ssp_ads7846_putget((4u << ADSCTRL_ADR_SH
) | ADSCTRL_STS
);
259 /* Enable Falling Edge */
260 set_irq_type(corgi_ts
->irq_gpio
, IRQT_FALLING
);
261 corgi_ts
->power_mode
= PWR_MODE_ACTIVE
;
266 #define corgits_suspend NULL
267 #define corgits_resume NULL
270 static int __init
corgits_probe(struct platform_device
*pdev
)
272 struct corgi_ts
*corgi_ts
;
273 struct input_dev
*input_dev
;
276 corgi_ts
= kzalloc(sizeof(struct corgi_ts
), GFP_KERNEL
);
277 input_dev
= input_allocate_device();
278 if (!corgi_ts
|| !input_dev
)
281 platform_set_drvdata(pdev
, corgi_ts
);
283 corgi_ts
->machinfo
= pdev
->dev
.platform_data
;
284 corgi_ts
->irq_gpio
= platform_get_irq(pdev
, 0);
286 if (corgi_ts
->irq_gpio
< 0) {
291 corgi_ts
->input
= input_dev
;
293 init_timer(&corgi_ts
->timer
);
294 corgi_ts
->timer
.data
= (unsigned long) corgi_ts
;
295 corgi_ts
->timer
.function
= corgi_ts_timer
;
297 input_dev
->name
= "Corgi Touchscreen";
298 input_dev
->phys
= "corgits/input0";
299 input_dev
->id
.bustype
= BUS_HOST
;
300 input_dev
->id
.vendor
= 0x0001;
301 input_dev
->id
.product
= 0x0002;
302 input_dev
->id
.version
= 0x0100;
303 input_dev
->dev
.parent
= &pdev
->dev
;
305 input_dev
->evbit
[0] = BIT_MASK(EV_KEY
) | BIT_MASK(EV_ABS
);
306 input_dev
->keybit
[BIT_WORD(BTN_TOUCH
)] = BIT_MASK(BTN_TOUCH
);
307 input_set_abs_params(input_dev
, ABS_X
, X_AXIS_MIN
, X_AXIS_MAX
, 0, 0);
308 input_set_abs_params(input_dev
, ABS_Y
, Y_AXIS_MIN
, Y_AXIS_MAX
, 0, 0);
309 input_set_abs_params(input_dev
, ABS_PRESSURE
, PRESSURE_MIN
, PRESSURE_MAX
, 0, 0);
311 pxa_gpio_mode(IRQ_TO_GPIO(corgi_ts
->irq_gpio
) | GPIO_IN
);
313 /* Initiaize ADS7846 Difference Reference mode */
314 corgi_ssp_ads7846_putget((1u << ADSCTRL_ADR_SH
) | ADSCTRL_STS
);
316 corgi_ssp_ads7846_putget((3u << ADSCTRL_ADR_SH
) | ADSCTRL_STS
);
318 corgi_ssp_ads7846_putget((4u << ADSCTRL_ADR_SH
) | ADSCTRL_STS
);
320 corgi_ssp_ads7846_putget((5u << ADSCTRL_ADR_SH
) | ADSCTRL_STS
);
323 if (request_irq(corgi_ts
->irq_gpio
, ts_interrupt
, IRQF_DISABLED
, "ts", corgi_ts
)) {
328 err
= input_register_device(corgi_ts
->input
);
332 corgi_ts
->power_mode
= PWR_MODE_ACTIVE
;
334 /* Enable Falling Edge */
335 set_irq_type(corgi_ts
->irq_gpio
, IRQT_FALLING
);
339 fail2
: free_irq(corgi_ts
->irq_gpio
, corgi_ts
);
340 fail1
: input_free_device(input_dev
);
345 static int corgits_remove(struct platform_device
*pdev
)
347 struct corgi_ts
*corgi_ts
= platform_get_drvdata(pdev
);
349 free_irq(corgi_ts
->irq_gpio
, corgi_ts
);
350 del_timer_sync(&corgi_ts
->timer
);
351 corgi_ts
->machinfo
->put_hsync();
352 input_unregister_device(corgi_ts
->input
);
357 static struct platform_driver corgits_driver
= {
358 .probe
= corgits_probe
,
359 .remove
= corgits_remove
,
360 .suspend
= corgits_suspend
,
361 .resume
= corgits_resume
,
367 static int __devinit
corgits_init(void)
369 return platform_driver_register(&corgits_driver
);
372 static void __exit
corgits_exit(void)
374 platform_driver_unregister(&corgits_driver
);
377 module_init(corgits_init
);
378 module_exit(corgits_exit
);
380 MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
381 MODULE_DESCRIPTION("Corgi TouchScreen Driver");
382 MODULE_LICENSE("GPL");