iwlwifi: introduce host commands callbacks

[linux/fpc-iii.git] / drivers / parport / parport_ip32.c

/* Low-level parallel port routines for built-in port on SGI IP32
 *
 * Author: Arnaud Giersch <arnaud.giersch@free.fr>
 *
 * Based on parport_pc.c by
 *      Phil Blundell, Tim Waugh, Jose Renau, David Campbell,
 *      Andrea Arcangeli, et al.
 *
 * Thanks to Ilya A. Volynets-Evenbakh for his help.
 *
 * Copyright (C) 2005, 2006 Arnaud Giersch.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the Free
 * Software Foundation; either version 2 of the License, or (at your option)
 * any later version.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with this program; if not, write to the Free Software Foundation, Inc., 59
 * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
 */

/* Current status:
 *
 *      Basic SPP and PS2 modes are supported.
 *      Support for parallel port IRQ is present.
 *      Hardware SPP (a.k.a. compatibility), EPP, and ECP modes are
 *      supported.
 *      SPP/ECP FIFO can be driven in PIO or DMA mode.  PIO mode can work with
 *      or without interrupt support.
 *
 *      Hardware ECP mode is not fully implemented (ecp_read_data and
 *      ecp_write_addr are actually missing).
 *
 * To do:
 *
 *      Fully implement ECP mode.
 *      EPP and ECP mode need to be tested.  I currently do not own any
 *      peripheral supporting these extended mode, and cannot test them.
 *      If DMA mode works well, decide if support for PIO FIFO modes should be
 *      dropped.
 *      Use the io{read,write} family functions when they become available in
 *      the linux-mips.org tree.  Note: the MIPS specific functions readsb()
 *      and writesb() are to be translated by ioread8_rep() and iowrite8_rep()
 *      respectively.
 */

/* The built-in parallel port on the SGI 02 workstation (a.k.a. IP32) is an
 * IEEE 1284 parallel port driven by a Texas Instrument TL16PIR552PH chip[1].
 * This chip supports SPP, bidirectional, EPP and ECP modes.  It has a 16 byte
 * FIFO buffer and supports DMA transfers.
 *
 * [1] http://focus.ti.com/docs/prod/folders/print/tl16pir552.html
 *
 * Theoretically, we could simply use the parport_pc module.  It is however
 * not so simple.  The parport_pc code assumes that the parallel port
 * registers are port-mapped.  On the O2, they are memory-mapped.
 * Furthermore, each register is replicated on 256 consecutive addresses (as
 * it is for the built-in serial ports on the same chip).
 */

/*--- Some configuration defines ---------------------------------------*/

/* DEBUG_PARPORT_IP32
 *      0       disable debug
 *      1       standard level: pr_debug1 is enabled
 *      2       parport_ip32_dump_state is enabled
 *      >=3     verbose level: pr_debug is enabled
 */
#if !defined(DEBUG_PARPORT_IP32)
#       define DEBUG_PARPORT_IP32  0    /* 0 (disabled) for production */
#endif

/*----------------------------------------------------------------------*/

/* Setup DEBUG macros.  This is done before any includes, just in case we
 * activate pr_debug() with DEBUG_PARPORT_IP32 >= 3.
 */
#if DEBUG_PARPORT_IP32 == 1
#       warning DEBUG_PARPORT_IP32 == 1
#elif DEBUG_PARPORT_IP32 == 2
#       warning DEBUG_PARPORT_IP32 == 2
#elif DEBUG_PARPORT_IP32 >= 3
#       warning DEBUG_PARPORT_IP32 >= 3
#       if !defined(DEBUG)
#               define DEBUG /* enable pr_debug() in kernel.h */
#       endif
#endif

#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/parport.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/stddef.h>
#include <linux/types.h>
#include <asm/io.h>
#include <asm/ip32/ip32_ints.h>
#include <asm/ip32/mace.h>

/*--- Global variables -------------------------------------------------*/

/* Verbose probing on by default for debugging. */
#if DEBUG_PARPORT_IP32 >= 1
#       define DEFAULT_VERBOSE_PROBING  1
#else
#       define DEFAULT_VERBOSE_PROBING  0
#endif

/* Default prefix for printk */
#define PPIP32 "parport_ip32: "

/*
 * These are the module parameters:
 * @features:           bit mask of features to enable/disable
 *                      (all enabled by default)
 * @verbose_probing:    log chit-chat during initialization
 */
#define PARPORT_IP32_ENABLE_IRQ (1U << 0)
#define PARPORT_IP32_ENABLE_DMA (1U << 1)
#define PARPORT_IP32_ENABLE_SPP (1U << 2)
#define PARPORT_IP32_ENABLE_EPP (1U << 3)
#define PARPORT_IP32_ENABLE_ECP (1U << 4)
static unsigned int features =  ~0U;
static int verbose_probing =    DEFAULT_VERBOSE_PROBING;

/* We do not support more than one port. */
static struct parport *this_port = NULL;

/* Timing constants for FIFO modes.  */
#define FIFO_NFAULT_TIMEOUT     100     /* milliseconds */
#define FIFO_POLLING_INTERVAL   50      /* microseconds */

/*--- I/O register definitions -----------------------------------------*/

/**
 * struct parport_ip32_regs - virtual addresses of parallel port registers
 * @data:       Data Register
 * @dsr:        Device Status Register
 * @dcr:        Device Control Register
 * @eppAddr:    EPP Address Register
 * @eppData0:   EPP Data Register 0
 * @eppData1:   EPP Data Register 1
 * @eppData2:   EPP Data Register 2
 * @eppData3:   EPP Data Register 3
 * @ecpAFifo:   ECP Address FIFO
 * @fifo:       General FIFO register.  The same address is used for:
 *              - cFifo, the Parallel Port DATA FIFO
 *              - ecpDFifo, the ECP Data FIFO
 *              - tFifo, the ECP Test FIFO
 * @cnfgA:      Configuration Register A
 * @cnfgB:      Configuration Register B
 * @ecr:        Extended Control Register
 */
struct parport_ip32_regs {
        void __iomem *data;
        void __iomem *dsr;
        void __iomem *dcr;
        void __iomem *eppAddr;
        void __iomem *eppData0;
        void __iomem *eppData1;
        void __iomem *eppData2;
        void __iomem *eppData3;
        void __iomem *ecpAFifo;
        void __iomem *fifo;
        void __iomem *cnfgA;
        void __iomem *cnfgB;
        void __iomem *ecr;
};

/* Device Status Register */
#define DSR_nBUSY               (1U << 7)       /* PARPORT_STATUS_BUSY */
#define DSR_nACK                (1U << 6)       /* PARPORT_STATUS_ACK */
#define DSR_PERROR              (1U << 5)       /* PARPORT_STATUS_PAPEROUT */
#define DSR_SELECT              (1U << 4)       /* PARPORT_STATUS_SELECT */
#define DSR_nFAULT              (1U << 3)       /* PARPORT_STATUS_ERROR */
#define DSR_nPRINT              (1U << 2)       /* specific to TL16PIR552 */
/* #define DSR_reserved         (1U << 1) */
#define DSR_TIMEOUT             (1U << 0)       /* EPP timeout */

/* Device Control Register */
/* #define DCR_reserved         (1U << 7) | (1U <<  6) */
#define DCR_DIR                 (1U << 5)       /* direction */
#define DCR_IRQ                 (1U << 4)       /* interrupt on nAck */
#define DCR_SELECT              (1U << 3)       /* PARPORT_CONTROL_SELECT */
#define DCR_nINIT               (1U << 2)       /* PARPORT_CONTROL_INIT */
#define DCR_AUTOFD              (1U << 1)       /* PARPORT_CONTROL_AUTOFD */
#define DCR_STROBE              (1U << 0)       /* PARPORT_CONTROL_STROBE */

/* ECP Configuration Register A */
#define CNFGA_IRQ               (1U << 7)
#define CNFGA_ID_MASK           ((1U << 6) | (1U << 5) | (1U << 4))
#define CNFGA_ID_SHIFT          4
#define CNFGA_ID_16             (00U << CNFGA_ID_SHIFT)
#define CNFGA_ID_8              (01U << CNFGA_ID_SHIFT)
#define CNFGA_ID_32             (02U << CNFGA_ID_SHIFT)
/* #define CNFGA_reserved       (1U << 3) */
#define CNFGA_nBYTEINTRANS      (1U << 2)
#define CNFGA_PWORDLEFT         ((1U << 1) | (1U << 0))

/* ECP Configuration Register B */
#define CNFGB_COMPRESS          (1U << 7)
#define CNFGB_INTRVAL           (1U << 6)
#define CNFGB_IRQ_MASK          ((1U << 5) | (1U << 4) | (1U << 3))
#define CNFGB_IRQ_SHIFT         3
#define CNFGB_DMA_MASK          ((1U << 2) | (1U << 1) | (1U << 0))
#define CNFGB_DMA_SHIFT         0

/* Extended Control Register */
#define ECR_MODE_MASK           ((1U << 7) | (1U << 6) | (1U << 5))
#define ECR_MODE_SHIFT          5
#define ECR_MODE_SPP            (00U << ECR_MODE_SHIFT)
#define ECR_MODE_PS2            (01U << ECR_MODE_SHIFT)
#define ECR_MODE_PPF            (02U << ECR_MODE_SHIFT)
#define ECR_MODE_ECP            (03U << ECR_MODE_SHIFT)
#define ECR_MODE_EPP            (04U << ECR_MODE_SHIFT)
/* #define ECR_MODE_reserved    (05U << ECR_MODE_SHIFT) */
#define ECR_MODE_TST            (06U << ECR_MODE_SHIFT)
#define ECR_MODE_CFG            (07U << ECR_MODE_SHIFT)
#define ECR_nERRINTR            (1U << 4)
#define ECR_DMAEN               (1U << 3)
#define ECR_SERVINTR            (1U << 2)
#define ECR_F_FULL              (1U << 1)
#define ECR_F_EMPTY             (1U << 0)

/*--- Private data -----------------------------------------------------*/

/**
 * enum parport_ip32_irq_mode - operation mode of interrupt handler
 * @PARPORT_IP32_IRQ_FWD:       forward interrupt to the upper parport layer
 * @PARPORT_IP32_IRQ_HERE:      interrupt is handled locally
 */
enum parport_ip32_irq_mode { PARPORT_IP32_IRQ_FWD, PARPORT_IP32_IRQ_HERE };

/**
 * struct parport_ip32_private - private stuff for &struct parport
 * @regs:               register addresses
 * @dcr_cache:          cached contents of DCR
 * @dcr_writable:       bit mask of writable DCR bits
 * @pword:              number of bytes per PWord
 * @fifo_depth:         number of PWords that FIFO will hold
 * @readIntrThreshold:  minimum number of PWords we can read
 *                      if we get an interrupt
 * @writeIntrThreshold: minimum number of PWords we can write
 *                      if we get an interrupt
 * @irq_mode:           operation mode of interrupt handler for this port
 * @irq_complete:       mutex used to wait for an interrupt to occur
 */
struct parport_ip32_private {
        struct parport_ip32_regs        regs;
        unsigned int                    dcr_cache;
        unsigned int                    dcr_writable;
        unsigned int                    pword;
        unsigned int                    fifo_depth;
        unsigned int                    readIntrThreshold;
        unsigned int                    writeIntrThreshold;
        enum parport_ip32_irq_mode      irq_mode;
        struct completion               irq_complete;
};

/*--- Debug code -------------------------------------------------------*/

/*
 * pr_debug1 - print debug messages
 *
 * This is like pr_debug(), but is defined for %DEBUG_PARPORT_IP32 >= 1
 */
#if DEBUG_PARPORT_IP32 >= 1
#       define pr_debug1(...)   printk(KERN_DEBUG __VA_ARGS__)
#else /* DEBUG_PARPORT_IP32 < 1 */
#       define pr_debug1(...)   do { } while (0)
#endif

/*
 * pr_trace, pr_trace1 - trace function calls
 * @p:          pointer to &struct parport
 * @fmt:        printk format string
 * @...:        parameters for format string
 *
 * Macros used to trace function calls.  The given string is formatted after
 * function name.  pr_trace() uses pr_debug(), and pr_trace1() uses
 * pr_debug1().  __pr_trace() is the low-level macro and is not to be used
 * directly.
 */
#define __pr_trace(pr, p, fmt, ...)                                     \
        pr("%s: %s" fmt "\n",                                           \
           ({ const struct parport *__p = (p);                          \
                   __p ? __p->name : "parport_ip32"; }),                \
           __func__ , ##__VA_ARGS__)
#define pr_trace(p, fmt, ...)   __pr_trace(pr_debug, p, fmt , ##__VA_ARGS__)
#define pr_trace1(p, fmt, ...)  __pr_trace(pr_debug1, p, fmt , ##__VA_ARGS__)

/*
 * __pr_probe, pr_probe - print message if @verbose_probing is true
 * @p:          pointer to &struct parport
 * @fmt:        printk format string
 * @...:        parameters for format string
 *
 * For new lines, use pr_probe().  Use __pr_probe() for continued lines.
 */
#define __pr_probe(...)                                                 \
        do { if (verbose_probing) printk(__VA_ARGS__); } while (0)
#define pr_probe(p, fmt, ...)                                           \
        __pr_probe(KERN_INFO PPIP32 "0x%lx: " fmt, (p)->base , ##__VA_ARGS__)

/*
 * parport_ip32_dump_state - print register status of parport
 * @p:          pointer to &struct parport
 * @str:        string to add in message
 * @show_ecp_config:    shall we dump ECP configuration registers too?
 *
 * This function is only here for debugging purpose, and should be used with
 * care.  Reading the parallel port registers may have undesired side effects.
 * Especially if @show_ecp_config is true, the parallel port is resetted.
 * This function is only defined if %DEBUG_PARPORT_IP32 >= 2.
 */
#if DEBUG_PARPORT_IP32 >= 2
static void parport_ip32_dump_state(struct parport *p, char *str,
                                    unsigned int show_ecp_config)
{
        struct parport_ip32_private * const priv = p->physport->private_data;
        unsigned int i;

        printk(KERN_DEBUG PPIP32 "%s: state (%s):\n", p->name, str);
        {
                static const char ecr_modes[8][4] = {"SPP", "PS2", "PPF",
                                                     "ECP", "EPP", "???",
                                                     "TST", "CFG"};
                unsigned int ecr = readb(priv->regs.ecr);
                printk(KERN_DEBUG PPIP32 "    ecr=0x%02x", ecr);
                printk(" %s",
                       ecr_modes[(ecr & ECR_MODE_MASK) >> ECR_MODE_SHIFT]);
                if (ecr & ECR_nERRINTR)
                        printk(",nErrIntrEn");
                if (ecr & ECR_DMAEN)
                        printk(",dmaEn");
                if (ecr & ECR_SERVINTR)
                        printk(",serviceIntr");
                if (ecr & ECR_F_FULL)
                        printk(",f_full");
                if (ecr & ECR_F_EMPTY)
                        printk(",f_empty");
                printk("\n");
        }
        if (show_ecp_config) {
                unsigned int oecr, cnfgA, cnfgB;
                oecr = readb(priv->regs.ecr);
                writeb(ECR_MODE_PS2, priv->regs.ecr);
                writeb(ECR_MODE_CFG, priv->regs.ecr);
                cnfgA = readb(priv->regs.cnfgA);
                cnfgB = readb(priv->regs.cnfgB);
                writeb(ECR_MODE_PS2, priv->regs.ecr);
                writeb(oecr, priv->regs.ecr);
                printk(KERN_DEBUG PPIP32 "    cnfgA=0x%02x", cnfgA);
                printk(" ISA-%s", (cnfgA & CNFGA_IRQ) ? "Level" : "Pulses");
                switch (cnfgA & CNFGA_ID_MASK) {
                case CNFGA_ID_8:
                        printk(",8 bits");
                        break;
                case CNFGA_ID_16:
                        printk(",16 bits");
                        break;
                case CNFGA_ID_32:
                        printk(",32 bits");
                        break;
                default:
                        printk(",unknown ID");
                        break;
                }
                if (!(cnfgA & CNFGA_nBYTEINTRANS))
                        printk(",ByteInTrans");
                if ((cnfgA & CNFGA_ID_MASK) != CNFGA_ID_8)
                        printk(",%d byte%s left", cnfgA & CNFGA_PWORDLEFT,
                               ((cnfgA & CNFGA_PWORDLEFT) > 1) ? "s" : "");
                printk("\n");
                printk(KERN_DEBUG PPIP32 "    cnfgB=0x%02x", cnfgB);
                printk(" irq=%u,dma=%u",
                       (cnfgB & CNFGB_IRQ_MASK) >> CNFGB_IRQ_SHIFT,
                       (cnfgB & CNFGB_DMA_MASK) >> CNFGB_DMA_SHIFT);
                printk(",intrValue=%d", !!(cnfgB & CNFGB_INTRVAL));
                if (cnfgB & CNFGB_COMPRESS)
                        printk(",compress");
                printk("\n");
        }
        for (i = 0; i < 2; i++) {
                unsigned int dcr = i ? priv->dcr_cache : readb(priv->regs.dcr);
                printk(KERN_DEBUG PPIP32 "    dcr(%s)=0x%02x",
                       i ? "soft" : "hard", dcr);
                printk(" %s", (dcr & DCR_DIR) ? "rev" : "fwd");
                if (dcr & DCR_IRQ)
                        printk(",ackIntEn");
                if (!(dcr & DCR_SELECT))
                        printk(",nSelectIn");
                if (dcr & DCR_nINIT)
                        printk(",nInit");
                if (!(dcr & DCR_AUTOFD))
                        printk(",nAutoFD");
                if (!(dcr & DCR_STROBE))
                        printk(",nStrobe");
                printk("\n");
        }
#define sep (f++ ? ',' : ' ')
        {
                unsigned int f = 0;
                unsigned int dsr = readb(priv->regs.dsr);
                printk(KERN_DEBUG PPIP32 "    dsr=0x%02x", dsr);
                if (!(dsr & DSR_nBUSY))
                        printk("%cBusy", sep);
                if (dsr & DSR_nACK)
                        printk("%cnAck", sep);
                if (dsr & DSR_PERROR)
                        printk("%cPError", sep);
                if (dsr & DSR_SELECT)
                        printk("%cSelect", sep);
                if (dsr & DSR_nFAULT)
                        printk("%cnFault", sep);
                if (!(dsr & DSR_nPRINT))
                        printk("%c(Print)", sep);
                if (dsr & DSR_TIMEOUT)
                        printk("%cTimeout", sep);
                printk("\n");
        }
#undef sep
}
#else /* DEBUG_PARPORT_IP32 < 2 */
#define parport_ip32_dump_state(...)    do { } while (0)
#endif

/*
 * CHECK_EXTRA_BITS - track and log extra bits
 * @p:          pointer to &struct parport
 * @b:          byte to inspect
 * @m:          bit mask of authorized bits
 *
 * This is used to track and log extra bits that should not be there in
 * parport_ip32_write_control() and parport_ip32_frob_control().  It is only
 * defined if %DEBUG_PARPORT_IP32 >= 1.
 */
#if DEBUG_PARPORT_IP32 >= 1
#define CHECK_EXTRA_BITS(p, b, m)                                       \
        do {                                                            \
                unsigned int __b = (b), __m = (m);                      \
                if (__b & ~__m)                                         \
                        pr_debug1(PPIP32 "%s: extra bits in %s(%s): "   \
                                  "0x%02x/0x%02x\n",                    \
                                  (p)->name, __func__, #b, __b, __m);   \
        } while (0)
#else /* DEBUG_PARPORT_IP32 < 1 */
#define CHECK_EXTRA_BITS(...)   do { } while (0)
#endif

/*--- IP32 parallel port DMA operations --------------------------------*/

/**
 * struct parport_ip32_dma_data - private data needed for DMA operation
 * @dir:        DMA direction (from or to device)
 * @buf:        buffer physical address
 * @len:        buffer length
 * @next:       address of next bytes to DMA transfer
 * @left:       number of bytes remaining
 * @ctx:        next context to write (0: context_a; 1: context_b)
 * @irq_on:     are the DMA IRQs currently enabled?
 * @lock:       spinlock to protect access to the structure
 */
struct parport_ip32_dma_data {
        enum dma_data_direction         dir;
        dma_addr_t                      buf;
        dma_addr_t                      next;
        size_t                          len;
        size_t                          left;
        unsigned int                    ctx;
        unsigned int                    irq_on;
        spinlock_t                      lock;
};
static struct parport_ip32_dma_data parport_ip32_dma;

/**
 * parport_ip32_dma_setup_context - setup next DMA context
 * @limit:      maximum data size for the context
 *
 * The alignment constraints must be verified in caller function, and the
 * parameter @limit must be set accordingly.
 */
static void parport_ip32_dma_setup_context(unsigned int limit)
{
        unsigned long flags;

        spin_lock_irqsave(&parport_ip32_dma.lock, flags);
        if (parport_ip32_dma.left > 0) {
                /* Note: ctxreg is "volatile" here only because
                 * mace->perif.ctrl.parport.context_a and context_b are
                 * "volatile".  */
                volatile u64 __iomem *ctxreg = (parport_ip32_dma.ctx == 0) ?
                        &mace->perif.ctrl.parport.context_a :
                        &mace->perif.ctrl.parport.context_b;
                u64 count;
                u64 ctxval;
                if (parport_ip32_dma.left <= limit) {
                        count = parport_ip32_dma.left;
                        ctxval = MACEPAR_CONTEXT_LASTFLAG;
                } else {
                        count = limit;
                        ctxval = 0;
                }

                pr_trace(NULL,
                         "(%u): 0x%04x:0x%04x, %u -> %u%s",
                         limit,
                         (unsigned int)parport_ip32_dma.buf,
                         (unsigned int)parport_ip32_dma.next,
                         (unsigned int)count,
                         parport_ip32_dma.ctx, ctxval ? "*" : "");

                ctxval |= parport_ip32_dma.next &
                        MACEPAR_CONTEXT_BASEADDR_MASK;
                ctxval |= ((count - 1) << MACEPAR_CONTEXT_DATALEN_SHIFT) &
                        MACEPAR_CONTEXT_DATALEN_MASK;
                writeq(ctxval, ctxreg);
                parport_ip32_dma.next += count;
                parport_ip32_dma.left -= count;
                parport_ip32_dma.ctx ^= 1U;
        }
        /* If there is nothing more to send, disable IRQs to avoid to
         * face an IRQ storm which can lock the machine.  Disable them
         * only once. */
        if (parport_ip32_dma.left == 0 && parport_ip32_dma.irq_on) {
                pr_debug(PPIP32 "IRQ off (ctx)\n");
                disable_irq_nosync(MACEISA_PAR_CTXA_IRQ);
                disable_irq_nosync(MACEISA_PAR_CTXB_IRQ);
                parport_ip32_dma.irq_on = 0;
        }
        spin_unlock_irqrestore(&parport_ip32_dma.lock, flags);
}

/**
 * parport_ip32_dma_interrupt - DMA interrupt handler
 * @irq:        interrupt number
 * @dev_id:     unused
 */
static irqreturn_t parport_ip32_dma_interrupt(int irq, void *dev_id)
{
        if (parport_ip32_dma.left)
                pr_trace(NULL, "(%d): ctx=%d", irq, parport_ip32_dma.ctx);
        parport_ip32_dma_setup_context(MACEPAR_CONTEXT_DATA_BOUND);
        return IRQ_HANDLED;
}

#if DEBUG_PARPORT_IP32
static irqreturn_t parport_ip32_merr_interrupt(int irq, void *dev_id)
{
        pr_trace1(NULL, "(%d)", irq);
        return IRQ_HANDLED;
}
#endif

/**
 * parport_ip32_dma_start - begins a DMA transfer
 * @dir:        DMA direction: DMA_TO_DEVICE or DMA_FROM_DEVICE
 * @addr:       pointer to data buffer
 * @count:      buffer size
 *
 * Calls to parport_ip32_dma_start() and parport_ip32_dma_stop() must be
 * correctly balanced.
 */
static int parport_ip32_dma_start(enum dma_data_direction dir,
                                  void *addr, size_t count)
{
        unsigned int limit;
        u64 ctrl;

        pr_trace(NULL, "(%d, %lu)", dir, (unsigned long)count);

        /* FIXME - add support for DMA_FROM_DEVICE.  In this case, buffer must
         * be 64 bytes aligned. */
        BUG_ON(dir != DMA_TO_DEVICE);

        /* Reset DMA controller */
        ctrl = MACEPAR_CTLSTAT_RESET;
        writeq(ctrl, &mace->perif.ctrl.parport.cntlstat);

        /* DMA IRQs should normally be enabled */
        if (!parport_ip32_dma.irq_on) {
                WARN_ON(1);
                enable_irq(MACEISA_PAR_CTXA_IRQ);
                enable_irq(MACEISA_PAR_CTXB_IRQ);
                parport_ip32_dma.irq_on = 1;
        }

        /* Prepare DMA pointers */
        parport_ip32_dma.dir = dir;
        parport_ip32_dma.buf = dma_map_single(NULL, addr, count, dir);
        parport_ip32_dma.len = count;
        parport_ip32_dma.next = parport_ip32_dma.buf;
        parport_ip32_dma.left = parport_ip32_dma.len;
        parport_ip32_dma.ctx = 0;

        /* Setup DMA direction and first two contexts */
        ctrl = (dir == DMA_TO_DEVICE) ? 0 : MACEPAR_CTLSTAT_DIRECTION;
        writeq(ctrl, &mace->perif.ctrl.parport.cntlstat);
        /* Single transfer should not cross a 4K page boundary */
        limit = MACEPAR_CONTEXT_DATA_BOUND -
                (parport_ip32_dma.next & (MACEPAR_CONTEXT_DATA_BOUND - 1));
        parport_ip32_dma_setup_context(limit);
        parport_ip32_dma_setup_context(MACEPAR_CONTEXT_DATA_BOUND);

        /* Real start of DMA transfer */
        ctrl |= MACEPAR_CTLSTAT_ENABLE;
        writeq(ctrl, &mace->perif.ctrl.parport.cntlstat);

        return 0;
}

/**
 * parport_ip32_dma_stop - ends a running DMA transfer
 *
 * Calls to parport_ip32_dma_start() and parport_ip32_dma_stop() must be
 * correctly balanced.
 */
static void parport_ip32_dma_stop(void)
{
        u64 ctx_a;
        u64 ctx_b;
        u64 ctrl;
        u64 diag;
        size_t res[2];  /* {[0] = res_a, [1] = res_b} */

        pr_trace(NULL, "()");

        /* Disable IRQs */
        spin_lock_irq(&parport_ip32_dma.lock);
        if (parport_ip32_dma.irq_on) {
                pr_debug(PPIP32 "IRQ off (stop)\n");
                disable_irq_nosync(MACEISA_PAR_CTXA_IRQ);
                disable_irq_nosync(MACEISA_PAR_CTXB_IRQ);
                parport_ip32_dma.irq_on = 0;
        }
        spin_unlock_irq(&parport_ip32_dma.lock);
        /* Force IRQ synchronization, even if the IRQs were disabled
         * elsewhere. */
        synchronize_irq(MACEISA_PAR_CTXA_IRQ);
        synchronize_irq(MACEISA_PAR_CTXB_IRQ);

        /* Stop DMA transfer */
        ctrl = readq(&mace->perif.ctrl.parport.cntlstat);
        ctrl &= ~MACEPAR_CTLSTAT_ENABLE;
        writeq(ctrl, &mace->perif.ctrl.parport.cntlstat);

        /* Adjust residue (parport_ip32_dma.left) */
        ctx_a = readq(&mace->perif.ctrl.parport.context_a);
        ctx_b = readq(&mace->perif.ctrl.parport.context_b);
        ctrl = readq(&mace->perif.ctrl.parport.cntlstat);
        diag = readq(&mace->perif.ctrl.parport.diagnostic);
        res[0] = (ctrl & MACEPAR_CTLSTAT_CTXA_VALID) ?
                1 + ((ctx_a & MACEPAR_CONTEXT_DATALEN_MASK) >>
                     MACEPAR_CONTEXT_DATALEN_SHIFT) :
                0;
        res[1] = (ctrl & MACEPAR_CTLSTAT_CTXB_VALID) ?
                1 + ((ctx_b & MACEPAR_CONTEXT_DATALEN_MASK) >>
                     MACEPAR_CONTEXT_DATALEN_SHIFT) :
                0;
        if (diag & MACEPAR_DIAG_DMACTIVE)
                res[(diag & MACEPAR_DIAG_CTXINUSE) != 0] =
                        1 + ((diag & MACEPAR_DIAG_CTRMASK) >>
                             MACEPAR_DIAG_CTRSHIFT);
        parport_ip32_dma.left += res[0] + res[1];

        /* Reset DMA controller, and re-enable IRQs */
        ctrl = MACEPAR_CTLSTAT_RESET;
        writeq(ctrl, &mace->perif.ctrl.parport.cntlstat);
        pr_debug(PPIP32 "IRQ on (stop)\n");
        enable_irq(MACEISA_PAR_CTXA_IRQ);
        enable_irq(MACEISA_PAR_CTXB_IRQ);
        parport_ip32_dma.irq_on = 1;

        dma_unmap_single(NULL, parport_ip32_dma.buf, parport_ip32_dma.len,
                         parport_ip32_dma.dir);
}

/**
 * parport_ip32_dma_get_residue - get residue from last DMA transfer
 *
 * Returns the number of bytes remaining from last DMA transfer.
 */
static inline size_t parport_ip32_dma_get_residue(void)
{
        return parport_ip32_dma.left;
}

/**
 * parport_ip32_dma_register - initialize DMA engine
 *
 * Returns zero for success.
 */
static int parport_ip32_dma_register(void)
{
        int err;

        spin_lock_init(&parport_ip32_dma.lock);
        parport_ip32_dma.irq_on = 1;

        /* Reset DMA controller */
        writeq(MACEPAR_CTLSTAT_RESET, &mace->perif.ctrl.parport.cntlstat);

        /* Request IRQs */
        err = request_irq(MACEISA_PAR_CTXA_IRQ, parport_ip32_dma_interrupt,
                          0, "parport_ip32", NULL);
        if (err)
                goto fail_a;
        err = request_irq(MACEISA_PAR_CTXB_IRQ, parport_ip32_dma_interrupt,
                          0, "parport_ip32", NULL);
        if (err)
                goto fail_b;
#if DEBUG_PARPORT_IP32
        /* FIXME - what is this IRQ for? */
        err = request_irq(MACEISA_PAR_MERR_IRQ, parport_ip32_merr_interrupt,
                          0, "parport_ip32", NULL);
        if (err)
                goto fail_merr;
#endif
        return 0;

#if DEBUG_PARPORT_IP32
fail_merr:
        free_irq(MACEISA_PAR_CTXB_IRQ, NULL);
#endif
fail_b:
        free_irq(MACEISA_PAR_CTXA_IRQ, NULL);
fail_a:
        return err;
}

/**
 * parport_ip32_dma_unregister - release and free resources for DMA engine
 */
static void parport_ip32_dma_unregister(void)
{
#if DEBUG_PARPORT_IP32
        free_irq(MACEISA_PAR_MERR_IRQ, NULL);
#endif
        free_irq(MACEISA_PAR_CTXB_IRQ, NULL);
        free_irq(MACEISA_PAR_CTXA_IRQ, NULL);
}

/*--- Interrupt handlers and associates --------------------------------*/

/**
 * parport_ip32_wakeup - wakes up code waiting for an interrupt
 * @p:          pointer to &struct parport
 */
static inline void parport_ip32_wakeup(struct parport *p)
{
        struct parport_ip32_private * const priv = p->physport->private_data;
        complete(&priv->irq_complete);
}

/**
 * parport_ip32_interrupt - interrupt handler
 * @irq:        interrupt number
 * @dev_id:     pointer to &struct parport
 *
 * Caught interrupts are forwarded to the upper parport layer if IRQ_mode is
 * %PARPORT_IP32_IRQ_FWD.
 */
static irqreturn_t parport_ip32_interrupt(int irq, void *dev_id)
{
        struct parport * const p = dev_id;
        struct parport_ip32_private * const priv = p->physport->private_data;
        enum parport_ip32_irq_mode irq_mode = priv->irq_mode;

        switch (irq_mode) {
        case PARPORT_IP32_IRQ_FWD:
                return parport_irq_handler(irq, dev_id);

        case PARPORT_IP32_IRQ_HERE:
                parport_ip32_wakeup(p);
                break;
        }

        return IRQ_HANDLED;
}

/*--- Some utility function to manipulate ECR register -----------------*/

/**
 * parport_ip32_read_econtrol - read contents of the ECR register
 * @p:          pointer to &struct parport
 */
static inline unsigned int parport_ip32_read_econtrol(struct parport *p)
{
        struct parport_ip32_private * const priv = p->physport->private_data;
        return readb(priv->regs.ecr);
}

/**
 * parport_ip32_write_econtrol - write new contents to the ECR register
 * @p:          pointer to &struct parport
 * @c:          new value to write
 */
static inline void parport_ip32_write_econtrol(struct parport *p,
                                               unsigned int c)
{
        struct parport_ip32_private * const priv = p->physport->private_data;
        writeb(c, priv->regs.ecr);
}

/**
 * parport_ip32_frob_econtrol - change bits from the ECR register
 * @p:          pointer to &struct parport
 * @mask:       bit mask of bits to change
 * @val:        new value for changed bits
 *
 * Read from the ECR, mask out the bits in @mask, exclusive-or with the bits
 * in @val, and write the result to the ECR.
 */
static inline void parport_ip32_frob_econtrol(struct parport *p,
                                              unsigned int mask,
                                              unsigned int val)
{
        unsigned int c;
        c = (parport_ip32_read_econtrol(p) & ~mask) ^ val;
        parport_ip32_write_econtrol(p, c);
}

/**
 * parport_ip32_set_mode - change mode of ECP port
 * @p:          pointer to &struct parport
 * @mode:       new mode to write in ECR
 *
 * ECR is reset in a sane state (interrupts and DMA disabled), and placed in
 * mode @mode.  Go through PS2 mode if needed.
 */
static void parport_ip32_set_mode(struct parport *p, unsigned int mode)
{
        unsigned int omode;

        mode &= ECR_MODE_MASK;
        omode = parport_ip32_read_econtrol(p) & ECR_MODE_MASK;

        if (!(mode == ECR_MODE_SPP || mode == ECR_MODE_PS2
              || omode == ECR_MODE_SPP || omode == ECR_MODE_PS2)) {
                /* We have to go through PS2 mode */
                unsigned int ecr = ECR_MODE_PS2 | ECR_nERRINTR | ECR_SERVINTR;
                parport_ip32_write_econtrol(p, ecr);
        }
        parport_ip32_write_econtrol(p, mode | ECR_nERRINTR | ECR_SERVINTR);
}

/*--- Basic functions needed for parport -------------------------------*/

/**
 * parport_ip32_read_data - return current contents of the DATA register
 * @p:          pointer to &struct parport
 */
static inline unsigned char parport_ip32_read_data(struct parport *p)
{
        struct parport_ip32_private * const priv = p->physport->private_data;
        return readb(priv->regs.data);
}

/**
 * parport_ip32_write_data - set new contents for the DATA register
 * @p:          pointer to &struct parport
 * @d:          new value to write
 */
static inline void parport_ip32_write_data(struct parport *p, unsigned char d)
{
        struct parport_ip32_private * const priv = p->physport->private_data;
        writeb(d, priv->regs.data);
}

/**
 * parport_ip32_read_status - return current contents of the DSR register
 * @p:          pointer to &struct parport
 */
static inline unsigned char parport_ip32_read_status(struct parport *p)
{
        struct parport_ip32_private * const priv = p->physport->private_data;
        return readb(priv->regs.dsr);
}

/**
 * __parport_ip32_read_control - return cached contents of the DCR register
 * @p:          pointer to &struct parport
 */
static inline unsigned int __parport_ip32_read_control(struct parport *p)
{
        struct parport_ip32_private * const priv = p->physport->private_data;
        return priv->dcr_cache; /* use soft copy */
}

/**
 * __parport_ip32_write_control - set new contents for the DCR register
 * @p:          pointer to &struct parport
 * @c:          new value to write
 */
static inline void __parport_ip32_write_control(struct parport *p,
                                                unsigned int c)
{
        struct parport_ip32_private * const priv = p->physport->private_data;
        CHECK_EXTRA_BITS(p, c, priv->dcr_writable);
        c &= priv->dcr_writable; /* only writable bits */
        writeb(c, priv->regs.dcr);
        priv->dcr_cache = c;            /* update soft copy */
}

/**
 * __parport_ip32_frob_control - change bits from the DCR register
 * @p:          pointer to &struct parport
 * @mask:       bit mask of bits to change
 * @val:        new value for changed bits
 *
 * This is equivalent to read from the DCR, mask out the bits in @mask,
 * exclusive-or with the bits in @val, and write the result to the DCR.
 * Actually, the cached contents of the DCR is used.
 */
static inline void __parport_ip32_frob_control(struct parport *p,
                                               unsigned int mask,
                                               unsigned int val)
{
        unsigned int c;
        c = (__parport_ip32_read_control(p) & ~mask) ^ val;
        __parport_ip32_write_control(p, c);
}

/**
 * parport_ip32_read_control - return cached contents of the DCR register
 * @p:          pointer to &struct parport
 *
 * The return value is masked so as to only return the value of %DCR_STROBE,
 * %DCR_AUTOFD, %DCR_nINIT, and %DCR_SELECT.
 */
static inline unsigned char parport_ip32_read_control(struct parport *p)
{
        const unsigned int rm =
                DCR_STROBE | DCR_AUTOFD | DCR_nINIT | DCR_SELECT;
        return __parport_ip32_read_control(p) & rm;
}

/**
 * parport_ip32_write_control - set new contents for the DCR register
 * @p:          pointer to &struct parport
 * @c:          new value to write
 *
 * The value is masked so as to only change the value of %DCR_STROBE,
 * %DCR_AUTOFD, %DCR_nINIT, and %DCR_SELECT.
 */
static inline void parport_ip32_write_control(struct parport *p,
                                              unsigned char c)
{
        const unsigned int wm =
                DCR_STROBE | DCR_AUTOFD | DCR_nINIT | DCR_SELECT;
        CHECK_EXTRA_BITS(p, c, wm);
        __parport_ip32_frob_control(p, wm, c & wm);
}

/**
 * parport_ip32_frob_control - change bits from the DCR register
 * @p:          pointer to &struct parport
 * @mask:       bit mask of bits to change
 * @val:        new value for changed bits
 *
 * This differs from __parport_ip32_frob_control() in that it only allows to
 * change the value of %DCR_STROBE, %DCR_AUTOFD, %DCR_nINIT, and %DCR_SELECT.
 */
static inline unsigned char parport_ip32_frob_control(struct parport *p,
                                                      unsigned char mask,
                                                      unsigned char val)
{
        const unsigned int wm =
                DCR_STROBE | DCR_AUTOFD | DCR_nINIT | DCR_SELECT;
        CHECK_EXTRA_BITS(p, mask, wm);
        CHECK_EXTRA_BITS(p, val, wm);
        __parport_ip32_frob_control(p, mask & wm, val & wm);
        return parport_ip32_read_control(p);
}

/**
 * parport_ip32_disable_irq - disable interrupts on the rising edge of nACK
 * @p:          pointer to &struct parport
 */
static inline void parport_ip32_disable_irq(struct parport *p)
{
        __parport_ip32_frob_control(p, DCR_IRQ, 0);
}

/**
 * parport_ip32_enable_irq - enable interrupts on the rising edge of nACK
 * @p:          pointer to &struct parport
 */
static inline void parport_ip32_enable_irq(struct parport *p)
{
        __parport_ip32_frob_control(p, DCR_IRQ, DCR_IRQ);
}

/**
 * parport_ip32_data_forward - enable host-to-peripheral communications
 * @p:          pointer to &struct parport
 *
 * Enable the data line drivers, for 8-bit host-to-peripheral communications.
 */
static inline void parport_ip32_data_forward(struct parport *p)
{
        __parport_ip32_frob_control(p, DCR_DIR, 0);
}

/**
 * parport_ip32_data_reverse - enable peripheral-to-host communications
 * @p:          pointer to &struct parport
 *
 * Place the data bus in a high impedance state, if @p->modes has the
 * PARPORT_MODE_TRISTATE bit set.
 */
static inline void parport_ip32_data_reverse(struct parport *p)
{
        __parport_ip32_frob_control(p, DCR_DIR, DCR_DIR);
}

/**
 * parport_ip32_init_state - for core parport code
 * @dev:        pointer to &struct pardevice
 * @s:          pointer to &struct parport_state to initialize
 */
static void parport_ip32_init_state(struct pardevice *dev,
                                    struct parport_state *s)
{
        s->u.ip32.dcr = DCR_SELECT | DCR_nINIT;
        s->u.ip32.ecr = ECR_MODE_PS2 | ECR_nERRINTR | ECR_SERVINTR;
}

/**
 * parport_ip32_save_state - for core parport code
 * @p:          pointer to &struct parport
 * @s:          pointer to &struct parport_state to save state to
 */
static void parport_ip32_save_state(struct parport *p,
                                    struct parport_state *s)
{
        s->u.ip32.dcr = __parport_ip32_read_control(p);
        s->u.ip32.ecr = parport_ip32_read_econtrol(p);
}

/**
 * parport_ip32_restore_state - for core parport code
 * @p:          pointer to &struct parport
 * @s:          pointer to &struct parport_state to restore state from
 */
static void parport_ip32_restore_state(struct parport *p,
                                       struct parport_state *s)
{
        parport_ip32_set_mode(p, s->u.ip32.ecr & ECR_MODE_MASK);
        parport_ip32_write_econtrol(p, s->u.ip32.ecr);
        __parport_ip32_write_control(p, s->u.ip32.dcr);
}

/*--- EPP mode functions -----------------------------------------------*/

/**
 * parport_ip32_clear_epp_timeout - clear Timeout bit in EPP mode
 * @p:          pointer to &struct parport
 *
 * Returns 1 if the Timeout bit is clear, and 0 otherwise.
 */
static unsigned int parport_ip32_clear_epp_timeout(struct parport *p)
{
        struct parport_ip32_private * const priv = p->physport->private_data;
        unsigned int cleared;

        if (!(parport_ip32_read_status(p) & DSR_TIMEOUT))
                cleared = 1;
        else {
                unsigned int r;
                /* To clear timeout some chips require double read */
                parport_ip32_read_status(p);
                r = parport_ip32_read_status(p);
                /* Some reset by writing 1 */
                writeb(r | DSR_TIMEOUT, priv->regs.dsr);
                /* Others by writing 0 */
                writeb(r & ~DSR_TIMEOUT, priv->regs.dsr);

                r = parport_ip32_read_status(p);
                cleared = !(r & DSR_TIMEOUT);
        }

        pr_trace(p, "(): %s", cleared ? "cleared" : "failed");
        return cleared;
}

/**
 * parport_ip32_epp_read - generic EPP read function
 * @eppreg:     I/O register to read from
 * @p:          pointer to &struct parport
 * @buf:        buffer to store read data
 * @len:        length of buffer @buf
 * @flags:      may be PARPORT_EPP_FAST
 */
static size_t parport_ip32_epp_read(void __iomem *eppreg,
                                    struct parport *p, void *buf,
                                    size_t len, int flags)
{
        struct parport_ip32_private * const priv = p->physport->private_data;
        size_t got;
        parport_ip32_set_mode(p, ECR_MODE_EPP);
        parport_ip32_data_reverse(p);
        parport_ip32_write_control(p, DCR_nINIT);
        if ((flags & PARPORT_EPP_FAST) && (len > 1)) {
                readsb(eppreg, buf, len);
                if (readb(priv->regs.dsr) & DSR_TIMEOUT) {
                        parport_ip32_clear_epp_timeout(p);
                        return -EIO;
                }
                got = len;
        } else {
                u8 *bufp = buf;
                for (got = 0; got < len; got++) {
                        *bufp++ = readb(eppreg);
                        if (readb(priv->regs.dsr) & DSR_TIMEOUT) {
                                parport_ip32_clear_epp_timeout(p);
                                break;
                        }
                }
        }
        parport_ip32_data_forward(p);
        parport_ip32_set_mode(p, ECR_MODE_PS2);
        return got;
}

/**
 * parport_ip32_epp_write - generic EPP write function
 * @eppreg:     I/O register to write to
 * @p:          pointer to &struct parport
 * @buf:        buffer of data to write
 * @len:        length of buffer @buf
 * @flags:      may be PARPORT_EPP_FAST
 */
static size_t parport_ip32_epp_write(void __iomem *eppreg,
                                     struct parport *p, const void *buf,
                                     size_t len, int flags)
{
        struct parport_ip32_private * const priv = p->physport->private_data;
        size_t written;
        parport_ip32_set_mode(p, ECR_MODE_EPP);
        parport_ip32_data_forward(p);
        parport_ip32_write_control(p, DCR_nINIT);
        if ((flags & PARPORT_EPP_FAST) && (len > 1)) {
                writesb(eppreg, buf, len);
                if (readb(priv->regs.dsr) & DSR_TIMEOUT) {
                        parport_ip32_clear_epp_timeout(p);
                        return -EIO;
                }
                written = len;
        } else {
                const u8 *bufp = buf;
                for (written = 0; written < len; written++) {
                        writeb(*bufp++, eppreg);
                        if (readb(priv->regs.dsr) & DSR_TIMEOUT) {
                                parport_ip32_clear_epp_timeout(p);
                                break;
                        }
                }
        }
        parport_ip32_set_mode(p, ECR_MODE_PS2);
        return written;
}

/**
 * parport_ip32_epp_read_data - read a block of data in EPP mode
 * @p:          pointer to &struct parport
 * @buf:        buffer to store read data
 * @len:        length of buffer @buf
 * @flags:      may be PARPORT_EPP_FAST
 */
static size_t parport_ip32_epp_read_data(struct parport *p, void *buf,
                                         size_t len, int flags)
{
        struct parport_ip32_private * const priv = p->physport->private_data;
        return parport_ip32_epp_read(priv->regs.eppData0, p, buf, len, flags);
}

/**
 * parport_ip32_epp_write_data - write a block of data in EPP mode
 * @p:          pointer to &struct parport
 * @buf:        buffer of data to write
 * @len:        length of buffer @buf
 * @flags:      may be PARPORT_EPP_FAST
 */
static size_t parport_ip32_epp_write_data(struct parport *p, const void *buf,
                                          size_t len, int flags)
{
        struct parport_ip32_private * const priv = p->physport->private_data;
        return parport_ip32_epp_write(priv->regs.eppData0, p, buf, len, flags);
}

/**
 * parport_ip32_epp_read_addr - read a block of addresses in EPP mode
 * @p:          pointer to &struct parport
 * @buf:        buffer to store read data
 * @len:        length of buffer @buf
 * @flags:      may be PARPORT_EPP_FAST
 */
static size_t parport_ip32_epp_read_addr(struct parport *p, void *buf,
                                         size_t len, int flags)
{
        struct parport_ip32_private * const priv = p->physport->private_data;
        return parport_ip32_epp_read(priv->regs.eppAddr, p, buf, len, flags);
}

/**
 * parport_ip32_epp_write_addr - write a block of addresses in EPP mode
 * @p:          pointer to &struct parport
 * @buf:        buffer of data to write
 * @len:        length of buffer @buf
 * @flags:      may be PARPORT_EPP_FAST
 */
static size_t parport_ip32_epp_write_addr(struct parport *p, const void *buf,
                                          size_t len, int flags)
{
        struct parport_ip32_private * const priv = p->physport->private_data;
        return parport_ip32_epp_write(priv->regs.eppAddr, p, buf, len, flags);
}

/*--- ECP mode functions (FIFO) ----------------------------------------*/

/**
 * parport_ip32_fifo_wait_break - check if the waiting function should return
 * @p:          pointer to &struct parport
 * @expire:     timeout expiring date, in jiffies
 *
 * parport_ip32_fifo_wait_break() checks if the waiting function should return
 * immediately or not.  The break conditions are:
 *      - expired timeout;
 *      - a pending signal;
 *      - nFault asserted low.
 * This function also calls cond_resched().
 */
static unsigned int parport_ip32_fifo_wait_break(struct parport *p,
                                                 unsigned long expire)
{
        cond_resched();
        if (time_after(jiffies, expire)) {
                pr_debug1(PPIP32 "%s: FIFO write timed out\n", p->name);
                return 1;
        }
        if (signal_pending(current)) {
                pr_debug1(PPIP32 "%s: Signal pending\n", p->name);
                return 1;
        }
        if (!(parport_ip32_read_status(p) & DSR_nFAULT)) {
                pr_debug1(PPIP32 "%s: nFault asserted low\n", p->name);
                return 1;
        }
        return 0;
}

/**
 * parport_ip32_fwp_wait_polling - wait for FIFO to empty (polling)
 * @p:          pointer to &struct parport
 *
 * Returns the number of bytes that can safely be written in the FIFO.  A
 * return value of zero means that the calling function should terminate as
 * fast as possible.
 */
static unsigned int parport_ip32_fwp_wait_polling(struct parport *p)
{
        struct parport_ip32_private * const priv = p->physport->private_data;
        struct parport * const physport = p->physport;
        unsigned long expire;
        unsigned int count;
        unsigned int ecr;

        expire = jiffies + physport->cad->timeout;
        count = 0;
        while (1) {
                if (parport_ip32_fifo_wait_break(p, expire))
                        break;

                /* Check FIFO state.  We do nothing when the FIFO is nor full,
                 * nor empty.  It appears that the FIFO full bit is not always
                 * reliable, the FIFO state is sometimes wrongly reported, and
                 * the chip gets confused if we give it another byte. */
                ecr = parport_ip32_read_econtrol(p);
                if (ecr & ECR_F_EMPTY) {
                        /* FIFO is empty, fill it up */
                        count = priv->fifo_depth;
                        break;
                }

                /* Wait a moment... */
                udelay(FIFO_POLLING_INTERVAL);
        } /* while (1) */

        return count;
}

/**
 * parport_ip32_fwp_wait_interrupt - wait for FIFO to empty (interrupt-driven)
 * @p:          pointer to &struct parport
 *
 * Returns the number of bytes that can safely be written in the FIFO.  A
 * return value of zero means that the calling function should terminate as
 * fast as possible.
 */
static unsigned int parport_ip32_fwp_wait_interrupt(struct parport *p)
{
        static unsigned int lost_interrupt = 0;
        struct parport_ip32_private * const priv = p->physport->private_data;
        struct parport * const physport = p->physport;
        unsigned long nfault_timeout;
        unsigned long expire;
        unsigned int count;
        unsigned int ecr;

        nfault_timeout = min((unsigned long)physport->cad->timeout,
                             msecs_to_jiffies(FIFO_NFAULT_TIMEOUT));
        expire = jiffies + physport->cad->timeout;
        count = 0;
        while (1) {
                if (parport_ip32_fifo_wait_break(p, expire))
                        break;

                /* Initialize mutex used to take interrupts into account */
                INIT_COMPLETION(priv->irq_complete);

                /* Enable serviceIntr */
                parport_ip32_frob_econtrol(p, ECR_SERVINTR, 0);

                /* Enabling serviceIntr while the FIFO is empty does not
                 * always generate an interrupt, so check for emptiness
                 * now. */
                ecr = parport_ip32_read_econtrol(p);
                if (!(ecr & ECR_F_EMPTY)) {
                        /* FIFO is not empty: wait for an interrupt or a
                         * timeout to occur */
                        wait_for_completion_interruptible_timeout(
                                &priv->irq_complete, nfault_timeout);
                        ecr = parport_ip32_read_econtrol(p);
                        if ((ecr & ECR_F_EMPTY) && !(ecr & ECR_SERVINTR)
                            && !lost_interrupt) {
                                printk(KERN_WARNING PPIP32
                                       "%s: lost interrupt in %s\n",
                                       p->name, __func__);
                                lost_interrupt = 1;
                        }
                }

                /* Disable serviceIntr */
                parport_ip32_frob_econtrol(p, ECR_SERVINTR, ECR_SERVINTR);

                /* Check FIFO state */
                if (ecr & ECR_F_EMPTY) {
                        /* FIFO is empty, fill it up */
                        count = priv->fifo_depth;
                        break;
                } else if (ecr & ECR_SERVINTR) {
                        /* FIFO is not empty, but we know that can safely push
                         * writeIntrThreshold bytes into it */
                        count = priv->writeIntrThreshold;
                        break;
                }
                /* FIFO is not empty, and we did not get any interrupt.
                 * Either it's time to check for nFault, or a signal is
                 * pending.  This is verified in
                 * parport_ip32_fifo_wait_break(), so we continue the loop. */
        } /* while (1) */

        return count;
}

/**
 * parport_ip32_fifo_write_block_pio - write a block of data (PIO mode)
 * @p:          pointer to &struct parport
 * @buf:        buffer of data to write
 * @len:        length of buffer @buf
 *
 * Uses PIO to write the contents of the buffer @buf into the parallel port
 * FIFO.  Returns the number of bytes that were actually written.  It can work
 * with or without the help of interrupts.  The parallel port must be
 * correctly initialized before calling parport_ip32_fifo_write_block_pio().
 */
static size_t parport_ip32_fifo_write_block_pio(struct parport *p,
                                                const void *buf, size_t len)
{
        struct parport_ip32_private * const priv = p->physport->private_data;
        const u8 *bufp = buf;
        size_t left = len;

        priv->irq_mode = PARPORT_IP32_IRQ_HERE;

        while (left > 0) {
                unsigned int count;

                count = (p->irq == PARPORT_IRQ_NONE) ?
                        parport_ip32_fwp_wait_polling(p) :
                        parport_ip32_fwp_wait_interrupt(p);
                if (count == 0)
                        break;  /* Transmission should be stopped */
                if (count > left)
                        count = left;
                if (count == 1) {
                        writeb(*bufp, priv->regs.fifo);
                        bufp++, left--;
                } else {
                        writesb(priv->regs.fifo, bufp, count);
                        bufp += count, left -= count;
                }
        }

        priv->irq_mode = PARPORT_IP32_IRQ_FWD;

        return len - left;
}

/**
 * parport_ip32_fifo_write_block_dma - write a block of data (DMA mode)
 * @p:          pointer to &struct parport
 * @buf:        buffer of data to write
 * @len:        length of buffer @buf
 *
 * Uses DMA to write the contents of the buffer @buf into the parallel port
 * FIFO.  Returns the number of bytes that were actually written.  The
 * parallel port must be correctly initialized before calling
 * parport_ip32_fifo_write_block_dma().
 */
static size_t parport_ip32_fifo_write_block_dma(struct parport *p,
                                                const void *buf, size_t len)
{
        struct parport_ip32_private * const priv = p->physport->private_data;
        struct parport * const physport = p->physport;
        unsigned long nfault_timeout;
        unsigned long expire;
        size_t written;
        unsigned int ecr;

        priv->irq_mode = PARPORT_IP32_IRQ_HERE;

        parport_ip32_dma_start(DMA_TO_DEVICE, (void *)buf, len);
        INIT_COMPLETION(priv->irq_complete);
        parport_ip32_frob_econtrol(p, ECR_DMAEN | ECR_SERVINTR, ECR_DMAEN);

        nfault_timeout = min((unsigned long)physport->cad->timeout,
                             msecs_to_jiffies(FIFO_NFAULT_TIMEOUT));
        expire = jiffies + physport->cad->timeout;
        while (1) {
                if (parport_ip32_fifo_wait_break(p, expire))
                        break;
                wait_for_completion_interruptible_timeout(&priv->irq_complete,
                                                          nfault_timeout);
                ecr = parport_ip32_read_econtrol(p);
                if (ecr & ECR_SERVINTR)
                        break;  /* DMA transfer just finished */
        }
        parport_ip32_dma_stop();
        written = len - parport_ip32_dma_get_residue();

        priv->irq_mode = PARPORT_IP32_IRQ_FWD;

        return written;
}

/**
 * parport_ip32_fifo_write_block - write a block of data
 * @p:          pointer to &struct parport
 * @buf:        buffer of data to write
 * @len:        length of buffer @buf
 *
 * Uses PIO or DMA to write the contents of the buffer @buf into the parallel
 * p FIFO.  Returns the number of bytes that were actually written.
 */
static size_t parport_ip32_fifo_write_block(struct parport *p,
                                            const void *buf, size_t len)
{
        size_t written = 0;
        if (len)
                /* FIXME - Maybe some threshold value should be set for @len
                 * under which we revert to PIO mode? */
                written = (p->modes & PARPORT_MODE_DMA) ?
                        parport_ip32_fifo_write_block_dma(p, buf, len) :
                        parport_ip32_fifo_write_block_pio(p, buf, len);
        return written;
}

/**
 * parport_ip32_drain_fifo - wait for FIFO to empty
 * @p:          pointer to &struct parport
 * @timeout:    timeout, in jiffies
 *
 * This function waits for FIFO to empty.  It returns 1 when FIFO is empty, or
 * 0 if the timeout @timeout is reached before, or if a signal is pending.
 */
static unsigned int parport_ip32_drain_fifo(struct parport *p,
                                            unsigned long timeout)
{
        unsigned long expire = jiffies + timeout;
        unsigned int polling_interval;
        unsigned int counter;

        /* Busy wait for approx. 200us */
        for (counter = 0; counter < 40; counter++) {
                if (parport_ip32_read_econtrol(p) & ECR_F_EMPTY)
                        break;
                if (time_after(jiffies, expire))
                        break;
                if (signal_pending(current))
                        break;
                udelay(5);
        }
        /* Poll slowly.  Polling interval starts with 1 millisecond, and is
         * increased exponentially until 128.  */
        polling_interval = 1; /* msecs */
        while (!(parport_ip32_read_econtrol(p) & ECR_F_EMPTY)) {
                if (time_after_eq(jiffies, expire))
                        break;
                msleep_interruptible(polling_interval);
                if (signal_pending(current))
                        break;
                if (polling_interval < 128)
                        polling_interval *= 2;
        }

        return !!(parport_ip32_read_econtrol(p) & ECR_F_EMPTY);
}

/**
 * parport_ip32_get_fifo_residue - reset FIFO
 * @p:          pointer to &struct parport
 * @mode:       current operation mode (ECR_MODE_PPF or ECR_MODE_ECP)
 *
 * This function resets FIFO, and returns the number of bytes remaining in it.
 */
static unsigned int parport_ip32_get_fifo_residue(struct parport *p,
                                                  unsigned int mode)
{
        struct parport_ip32_private * const priv = p->physport->private_data;
        unsigned int residue;
        unsigned int cnfga;

        /* FIXME - We are missing one byte if the printer is off-line.  I
         * don't know how to detect this.  It looks that the full bit is not
         * always reliable.  For the moment, the problem is avoided in most
         * cases by testing for BUSY in parport_ip32_compat_write_data().
         */
        if (parport_ip32_read_econtrol(p) & ECR_F_EMPTY)
                residue = 0;
        else {
                pr_debug1(PPIP32 "%s: FIFO is stuck\n", p->name);

                /* Stop all transfers.
                 *
                 * Microsoft's document instructs to drive DCR_STROBE to 0,
                 * but it doesn't work (at least in Compatibility mode, not
                 * tested in ECP mode).  Switching directly to Test mode (as
                 * in parport_pc) is not an option: it does confuse the port,
                 * ECP service interrupts are no more working after that.  A
                 * hard reset is then needed to revert to a sane state.
                 *
                 * Let's hope that the FIFO is really stuck and that the
                 * peripheral doesn't wake up now.
                 */
                parport_ip32_frob_control(p, DCR_STROBE, 0);

                /* Fill up FIFO */
                for (residue = priv->fifo_depth; residue > 0; residue--) {
                        if (parport_ip32_read_econtrol(p) & ECR_F_FULL)
                                break;
                        writeb(0x00, priv->regs.fifo);
                }
        }
        if (residue)
                pr_debug1(PPIP32 "%s: %d PWord%s left in FIFO\n",
                          p->name, residue,
                          (residue == 1) ? " was" : "s were");

        /* Now reset the FIFO */
        parport_ip32_set_mode(p, ECR_MODE_PS2);

        /* Host recovery for ECP mode */
        if (mode == ECR_MODE_ECP) {
                parport_ip32_data_reverse(p);
                parport_ip32_frob_control(p, DCR_nINIT, 0);
                if (parport_wait_peripheral(p, DSR_PERROR, 0))
                        pr_debug1(PPIP32 "%s: PEerror timeout 1 in %s\n",
                                  p->name, __func__);
                parport_ip32_frob_control(p, DCR_STROBE, DCR_STROBE);
                parport_ip32_frob_control(p, DCR_nINIT, DCR_nINIT);
                if (parport_wait_peripheral(p, DSR_PERROR, DSR_PERROR))
                        pr_debug1(PPIP32 "%s: PEerror timeout 2 in %s\n",
                                  p->name, __func__);
        }

        /* Adjust residue if needed */
        parport_ip32_set_mode(p, ECR_MODE_CFG);
        cnfga = readb(priv->regs.cnfgA);
        if (!(cnfga & CNFGA_nBYTEINTRANS)) {
                pr_debug1(PPIP32 "%s: cnfgA contains 0x%02x\n",
                          p->name, cnfga);
                pr_debug1(PPIP32 "%s: Accounting for extra byte\n",
                          p->name);
                residue++;
        }

        /* Don't care about partial PWords since we do not support
         * PWord != 1 byte. */

        /* Back to forward PS2 mode. */
        parport_ip32_set_mode(p, ECR_MODE_PS2);
        parport_ip32_data_forward(p);

        return residue;
}

/**
 * parport_ip32_compat_write_data - write a block of data in SPP mode
 * @p:          pointer to &struct parport
 * @buf:        buffer of data to write
 * @len:        length of buffer @buf
 * @flags:      ignored
 */
static size_t parport_ip32_compat_write_data(struct parport *p,
                                             const void *buf, size_t len,
                                             int flags)
{
        static unsigned int ready_before = 1;
        struct parport_ip32_private * const priv = p->physport->private_data;
        struct parport * const physport = p->physport;
        size_t written = 0;

        /* Special case: a timeout of zero means we cannot call schedule().
         * Also if O_NONBLOCK is set then use the default implementation. */
        if (physport->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
                return parport_ieee1284_write_compat(p, buf, len, flags);

        /* Reset FIFO, go in forward mode, and disable ackIntEn */
        parport_ip32_set_mode(p, ECR_MODE_PS2);
        parport_ip32_write_control(p, DCR_SELECT | DCR_nINIT);
        parport_ip32_data_forward(p);
        parport_ip32_disable_irq(p);
        parport_ip32_set_mode(p, ECR_MODE_PPF);
        physport->ieee1284.phase = IEEE1284_PH_FWD_DATA;

        /* Wait for peripheral to become ready */
        if (parport_wait_peripheral(p, DSR_nBUSY | DSR_nFAULT,
                                       DSR_nBUSY | DSR_nFAULT)) {
                /* Avoid to flood the logs */
                if (ready_before)
                        printk(KERN_INFO PPIP32 "%s: not ready in %s\n",
                               p->name, __func__);
                ready_before = 0;
                goto stop;
        }
        ready_before = 1;

        written = parport_ip32_fifo_write_block(p, buf, len);

        /* Wait FIFO to empty.  Timeout is proportional to FIFO_depth.  */
        parport_ip32_drain_fifo(p, physport->cad->timeout * priv->fifo_depth);

        /* Check for a potential residue */
        written -= parport_ip32_get_fifo_residue(p, ECR_MODE_PPF);

        /* Then, wait for BUSY to get low. */
        if (parport_wait_peripheral(p, DSR_nBUSY, DSR_nBUSY))
                printk(KERN_DEBUG PPIP32 "%s: BUSY timeout in %s\n",
                       p->name, __func__);

stop:
        /* Reset FIFO */
        parport_ip32_set_mode(p, ECR_MODE_PS2);
        physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE;

        return written;
}

/*
 * FIXME - Insert here parport_ip32_ecp_read_data().
 */

/**
 * parport_ip32_ecp_write_data - write a block of data in ECP mode
 * @p:          pointer to &struct parport
 * @buf:        buffer of data to write
 * @len:        length of buffer @buf
 * @flags:      ignored
 */
static size_t parport_ip32_ecp_write_data(struct parport *p,
                                          const void *buf, size_t len,
                                          int flags)
{
        static unsigned int ready_before = 1;
        struct parport_ip32_private * const priv = p->physport->private_data;
        struct parport * const physport = p->physport;
        size_t written = 0;

        /* Special case: a timeout of zero means we cannot call schedule().
         * Also if O_NONBLOCK is set then use the default implementation. */
        if (physport->cad->timeout <= PARPORT_INACTIVITY_O_NONBLOCK)
                return parport_ieee1284_ecp_write_data(p, buf, len, flags);

        /* Negotiate to forward mode if necessary. */
        if (physport->ieee1284.phase != IEEE1284_PH_FWD_IDLE) {
                /* Event 47: Set nInit high. */
                parport_ip32_frob_control(p, DCR_nINIT | DCR_AUTOFD,
                                             DCR_nINIT | DCR_AUTOFD);

                /* Event 49: PError goes high. */
                if (parport_wait_peripheral(p, DSR_PERROR, DSR_PERROR)) {
                        printk(KERN_DEBUG PPIP32 "%s: PError timeout in %s",
                               p->name, __func__);
                        physport->ieee1284.phase = IEEE1284_PH_ECP_DIR_UNKNOWN;
                        return 0;
                }
        }

        /* Reset FIFO, go in forward mode, and disable ackIntEn */
        parport_ip32_set_mode(p, ECR_MODE_PS2);
        parport_ip32_write_control(p, DCR_SELECT | DCR_nINIT);
        parport_ip32_data_forward(p);
        parport_ip32_disable_irq(p);
        parport_ip32_set_mode(p, ECR_MODE_ECP);
        physport->ieee1284.phase = IEEE1284_PH_FWD_DATA;

        /* Wait for peripheral to become ready */
        if (parport_wait_peripheral(p, DSR_nBUSY | DSR_nFAULT,
                                       DSR_nBUSY | DSR_nFAULT)) {
                /* Avoid to flood the logs */
                if (ready_before)
                        printk(KERN_INFO PPIP32 "%s: not ready in %s\n",
                               p->name, __func__);
                ready_before = 0;
                goto stop;
        }
        ready_before = 1;

        written = parport_ip32_fifo_write_block(p, buf, len);

        /* Wait FIFO to empty.  Timeout is proportional to FIFO_depth.  */
        parport_ip32_drain_fifo(p, physport->cad->timeout * priv->fifo_depth);

        /* Check for a potential residue */
        written -= parport_ip32_get_fifo_residue(p, ECR_MODE_ECP);

        /* Then, wait for BUSY to get low. */
        if (parport_wait_peripheral(p, DSR_nBUSY, DSR_nBUSY))
                printk(KERN_DEBUG PPIP32 "%s: BUSY timeout in %s\n",
                       p->name, __func__);

stop:
        /* Reset FIFO */
        parport_ip32_set_mode(p, ECR_MODE_PS2);
        physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE;

        return written;
}

/*
 * FIXME - Insert here parport_ip32_ecp_write_addr().
 */

/*--- Default parport operations ---------------------------------------*/

static __initdata struct parport_operations parport_ip32_ops = {
        .write_data             = parport_ip32_write_data,
        .read_data              = parport_ip32_read_data,

        .write_control          = parport_ip32_write_control,
        .read_control           = parport_ip32_read_control,
        .frob_control           = parport_ip32_frob_control,

        .read_status            = parport_ip32_read_status,

        .enable_irq             = parport_ip32_enable_irq,
        .disable_irq            = parport_ip32_disable_irq,

        .data_forward           = parport_ip32_data_forward,
        .data_reverse           = parport_ip32_data_reverse,

        .init_state             = parport_ip32_init_state,
        .save_state             = parport_ip32_save_state,
        .restore_state          = parport_ip32_restore_state,

        .epp_write_data         = parport_ieee1284_epp_write_data,
        .epp_read_data          = parport_ieee1284_epp_read_data,
        .epp_write_addr         = parport_ieee1284_epp_write_addr,
        .epp_read_addr          = parport_ieee1284_epp_read_addr,

        .ecp_write_data         = parport_ieee1284_ecp_write_data,
        .ecp_read_data          = parport_ieee1284_ecp_read_data,
        .ecp_write_addr         = parport_ieee1284_ecp_write_addr,

        .compat_write_data      = parport_ieee1284_write_compat,
        .nibble_read_data       = parport_ieee1284_read_nibble,
        .byte_read_data         = parport_ieee1284_read_byte,

        .owner                  = THIS_MODULE,
};

/*--- Device detection -------------------------------------------------*/

/**
 * parport_ip32_ecp_supported - check for an ECP port
 * @p:          pointer to the &parport structure
 *
 * Returns 1 if an ECP port is found, and 0 otherwise.  This function actually
 * checks if an Extended Control Register seems to be present.  On successful
 * return, the port is placed in SPP mode.
 */
static __init unsigned int parport_ip32_ecp_supported(struct parport *p)
{
        struct parport_ip32_private * const priv = p->physport->private_data;
        unsigned int ecr;

        ecr = ECR_MODE_PS2 | ECR_nERRINTR | ECR_SERVINTR;
        writeb(ecr, priv->regs.ecr);
        if (readb(priv->regs.ecr) != (ecr | ECR_F_EMPTY))
                goto fail;

        pr_probe(p, "Found working ECR register\n");
        parport_ip32_set_mode(p, ECR_MODE_SPP);
        parport_ip32_write_control(p, DCR_SELECT | DCR_nINIT);
        return 1;

fail:
        pr_probe(p, "ECR register not found\n");
        return 0;
}

/**
 * parport_ip32_fifo_supported - check for FIFO parameters
 * @p:          pointer to the &parport structure
 *
 * Check for FIFO parameters of an Extended Capabilities Port.  Returns 1 on
 * success, and 0 otherwise.  Adjust FIFO parameters in the parport structure.
 * On return, the port is placed in SPP mode.
 */
static __init unsigned int parport_ip32_fifo_supported(struct parport *p)
{
        struct parport_ip32_private * const priv = p->physport->private_data;
        unsigned int configa, configb;
        unsigned int pword;
        unsigned int i;

        /* Configuration mode */
        parport_ip32_set_mode(p, ECR_MODE_CFG);
        configa = readb(priv->regs.cnfgA);
        configb = readb(priv->regs.cnfgB);

        /* Find out PWord size */
        switch (configa & CNFGA_ID_MASK) {
        case CNFGA_ID_8:
                pword = 1;
                break;
        case CNFGA_ID_16:
                pword = 2;
                break;
        case CNFGA_ID_32:
                pword = 4;
                break;
        default:
                pr_probe(p, "Unknown implementation ID: 0x%0x\n",
                         (configa & CNFGA_ID_MASK) >> CNFGA_ID_SHIFT);
                goto fail;
                break;
        }
        if (pword != 1) {
                pr_probe(p, "Unsupported PWord size: %u\n", pword);
                goto fail;
        }
        priv->pword = pword;
        pr_probe(p, "PWord is %u bits\n", 8 * priv->pword);

        /* Check for compression support */
        writeb(configb | CNFGB_COMPRESS, priv->regs.cnfgB);
        if (readb(priv->regs.cnfgB) & CNFGB_COMPRESS)
                pr_probe(p, "Hardware compression detected (unsupported)\n");
        writeb(configb & ~CNFGB_COMPRESS, priv->regs.cnfgB);

        /* Reset FIFO and go in test mode (no interrupt, no DMA) */
        parport_ip32_set_mode(p, ECR_MODE_TST);

        /* FIFO must be empty now */
        if (!(readb(priv->regs.ecr) & ECR_F_EMPTY)) {
                pr_probe(p, "FIFO not reset\n");
                goto fail;
        }

        /* Find out FIFO depth. */
        priv->fifo_depth = 0;
        for (i = 0; i < 1024; i++) {
                if (readb(priv->regs.ecr) & ECR_F_FULL) {
                        /* FIFO full */
                        priv->fifo_depth = i;
                        break;
                }
                writeb((u8)i, priv->regs.fifo);
        }
        if (i >= 1024) {
                pr_probe(p, "Can't fill FIFO\n");
                goto fail;
        }
        if (!priv->fifo_depth) {
                pr_probe(p, "Can't get FIFO depth\n");
                goto fail;
        }
        pr_probe(p, "FIFO is %u PWords deep\n", priv->fifo_depth);

        /* Enable interrupts */
        parport_ip32_frob_econtrol(p, ECR_SERVINTR, 0);

        /* Find out writeIntrThreshold: number of PWords we know we can write
         * if we get an interrupt. */
        priv->writeIntrThreshold = 0;
        for (i = 0; i < priv->fifo_depth; i++) {
                if (readb(priv->regs.fifo) != (u8)i) {
                        pr_probe(p, "Invalid data in FIFO\n");
                        goto fail;
                }
                if (!priv->writeIntrThreshold
                    && readb(priv->regs.ecr) & ECR_SERVINTR)
                        /* writeIntrThreshold reached */
                        priv->writeIntrThreshold = i + 1;
                if (i + 1 < priv->fifo_depth
                    && readb(priv->regs.ecr) & ECR_F_EMPTY) {
                        /* FIFO empty before the last byte? */
                        pr_probe(p, "Data lost in FIFO\n");
                        goto fail;
                }
        }
        if (!priv->writeIntrThreshold) {
                pr_probe(p, "Can't get writeIntrThreshold\n");
                goto fail;
        }
        pr_probe(p, "writeIntrThreshold is %u\n", priv->writeIntrThreshold);

        /* FIFO must be empty now */
        if (!(readb(priv->regs.ecr) & ECR_F_EMPTY)) {
                pr_probe(p, "Can't empty FIFO\n");
                goto fail;
        }

        /* Reset FIFO */
        parport_ip32_set_mode(p, ECR_MODE_PS2);
        /* Set reverse direction (must be in PS2 mode) */
        parport_ip32_data_reverse(p);
        /* Test FIFO, no interrupt, no DMA */
        parport_ip32_set_mode(p, ECR_MODE_TST);
        /* Enable interrupts */
        parport_ip32_frob_econtrol(p, ECR_SERVINTR, 0);

        /* Find out readIntrThreshold: number of PWords we can read if we get
         * an interrupt. */
        priv->readIntrThreshold = 0;
        for (i = 0; i < priv->fifo_depth; i++) {
                writeb(0xaa, priv->regs.fifo);
                if (readb(priv->regs.ecr) & ECR_SERVINTR) {
                        /* readIntrThreshold reached */
                        priv->readIntrThreshold = i + 1;
                        break;
                }
        }
        if (!priv->readIntrThreshold) {
                pr_probe(p, "Can't get readIntrThreshold\n");
                goto fail;
        }
        pr_probe(p, "readIntrThreshold is %u\n", priv->readIntrThreshold);

        /* Reset ECR */
        parport_ip32_set_mode(p, ECR_MODE_PS2);
        parport_ip32_data_forward(p);
        parport_ip32_set_mode(p, ECR_MODE_SPP);
        return 1;

fail:
        priv->fifo_depth = 0;
        parport_ip32_set_mode(p, ECR_MODE_SPP);
        return 0;
}

/*--- Initialization code ----------------------------------------------*/

/**
 * parport_ip32_make_isa_registers - compute (ISA) register addresses
 * @regs:       pointer to &struct parport_ip32_regs to fill
 * @base:       base address of standard and EPP registers
 * @base_hi:    base address of ECP registers
 * @regshift:   how much to shift register offset by
 *
 * Compute register addresses, according to the ISA standard.  The addresses
 * of the standard and EPP registers are computed from address @base.  The
 * addresses of the ECP registers are computed from address @base_hi.
 */
static void __init
parport_ip32_make_isa_registers(struct parport_ip32_regs *regs,
                                void __iomem *base, void __iomem *base_hi,
                                unsigned int regshift)
{
#define r_base(offset)    ((u8 __iomem *)base    + ((offset) << regshift))
#define r_base_hi(offset) ((u8 __iomem *)base_hi + ((offset) << regshift))
        *regs = (struct parport_ip32_regs){
                .data           = r_base(0),
                .dsr            = r_base(1),
                .dcr            = r_base(2),
                .eppAddr        = r_base(3),
                .eppData0       = r_base(4),
                .eppData1       = r_base(5),
                .eppData2       = r_base(6),
                .eppData3       = r_base(7),
                .ecpAFifo       = r_base(0),
                .fifo           = r_base_hi(0),
                .cnfgA          = r_base_hi(0),
                .cnfgB          = r_base_hi(1),
                .ecr            = r_base_hi(2)
        };
#undef r_base_hi
#undef r_base
}

/**
 * parport_ip32_probe_port - probe and register IP32 built-in parallel port
 *
 * Returns the new allocated &parport structure.  On error, an error code is
 * encoded in return value with the ERR_PTR function.
 */
static __init struct parport *parport_ip32_probe_port(void)
{
        struct parport_ip32_regs regs;
        struct parport_ip32_private *priv = NULL;
        struct parport_operations *ops = NULL;
        struct parport *p = NULL;
        int err;

        parport_ip32_make_isa_registers(&regs, &mace->isa.parallel,
                                        &mace->isa.ecp1284, 8 /* regshift */);

        ops = kmalloc(sizeof(struct parport_operations), GFP_KERNEL);
        priv = kmalloc(sizeof(struct parport_ip32_private), GFP_KERNEL);
        p = parport_register_port(0, PARPORT_IRQ_NONE, PARPORT_DMA_NONE, ops);
        if (ops == NULL || priv == NULL || p == NULL) {
                err = -ENOMEM;
                goto fail;
        }
        p->base = MACE_BASE + offsetof(struct sgi_mace, isa.parallel);
        p->base_hi = MACE_BASE + offsetof(struct sgi_mace, isa.ecp1284);
        p->private_data = priv;

        *ops = parport_ip32_ops;
        *priv = (struct parport_ip32_private){
                .regs                   = regs,
                .dcr_writable           = DCR_DIR | DCR_SELECT | DCR_nINIT |
                                          DCR_AUTOFD | DCR_STROBE,
                .irq_mode               = PARPORT_IP32_IRQ_FWD,
        };
        init_completion(&priv->irq_complete);

        /* Probe port. */
        if (!parport_ip32_ecp_supported(p)) {
                err = -ENODEV;
                goto fail;
        }
        parport_ip32_dump_state(p, "begin init", 0);

        /* We found what looks like a working ECR register.  Simply assume
         * that all modes are correctly supported.  Enable basic modes. */
        p->modes = PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT;
        p->modes |= PARPORT_MODE_TRISTATE;

        if (!parport_ip32_fifo_supported(p)) {
                printk(KERN_WARNING PPIP32
                       "%s: error: FIFO disabled\n", p->name);
                /* Disable hardware modes depending on a working FIFO. */
                features &= ~PARPORT_IP32_ENABLE_SPP;
                features &= ~PARPORT_IP32_ENABLE_ECP;
                /* DMA is not needed if FIFO is not supported.  */
                features &= ~PARPORT_IP32_ENABLE_DMA;
        }

        /* Request IRQ */
        if (features & PARPORT_IP32_ENABLE_IRQ) {
                int irq = MACEISA_PARALLEL_IRQ;
                if (request_irq(irq, parport_ip32_interrupt, 0, p->name, p)) {
                        printk(KERN_WARNING PPIP32
                               "%s: error: IRQ disabled\n", p->name);
                        /* DMA cannot work without interrupts. */
                        features &= ~PARPORT_IP32_ENABLE_DMA;
                } else {
                        pr_probe(p, "Interrupt support enabled\n");
                        p->irq = irq;
                        priv->dcr_writable |= DCR_IRQ;
                }
        }

        /* Allocate DMA resources */
        if (features & PARPORT_IP32_ENABLE_DMA) {
                if (parport_ip32_dma_register())
                        printk(KERN_WARNING PPIP32
                               "%s: error: DMA disabled\n", p->name);
                else {
                        pr_probe(p, "DMA support enabled\n");
                        p->dma = 0; /* arbitrary value != PARPORT_DMA_NONE */
                        p->modes |= PARPORT_MODE_DMA;
                }
        }

        if (features & PARPORT_IP32_ENABLE_SPP) {
                /* Enable compatibility FIFO mode */
                p->ops->compat_write_data = parport_ip32_compat_write_data;
                p->modes |= PARPORT_MODE_COMPAT;
                pr_probe(p, "Hardware support for SPP mode enabled\n");
        }
        if (features & PARPORT_IP32_ENABLE_EPP) {
                /* Set up access functions to use EPP hardware. */
                p->ops->epp_read_data = parport_ip32_epp_read_data;
                p->ops->epp_write_data = parport_ip32_epp_write_data;
                p->ops->epp_read_addr = parport_ip32_epp_read_addr;
                p->ops->epp_write_addr = parport_ip32_epp_write_addr;
                p->modes |= PARPORT_MODE_EPP;
                pr_probe(p, "Hardware support for EPP mode enabled\n");
        }
        if (features & PARPORT_IP32_ENABLE_ECP) {
                /* Enable ECP FIFO mode */
                p->ops->ecp_write_data = parport_ip32_ecp_write_data;
                /* FIXME - not implemented */
/*              p->ops->ecp_read_data  = parport_ip32_ecp_read_data; */
/*              p->ops->ecp_write_addr = parport_ip32_ecp_write_addr; */
                p->modes |= PARPORT_MODE_ECP;
                pr_probe(p, "Hardware support for ECP mode enabled\n");
        }

        /* Initialize the port with sensible values */
        parport_ip32_set_mode(p, ECR_MODE_PS2);
        parport_ip32_write_control(p, DCR_SELECT | DCR_nINIT);
        parport_ip32_data_forward(p);
        parport_ip32_disable_irq(p);
        parport_ip32_write_data(p, 0x00);
        parport_ip32_dump_state(p, "end init", 0);

        /* Print out what we found */
        printk(KERN_INFO "%s: SGI IP32 at 0x%lx (0x%lx)",
               p->name, p->base, p->base_hi);
        if (p->irq != PARPORT_IRQ_NONE)
                printk(", irq %d", p->irq);
        printk(" [");
#define printmode(x)    if (p->modes & PARPORT_MODE_##x)                \
                                printk("%s%s", f++ ? "," : "", #x)
        {
                unsigned int f = 0;
                printmode(PCSPP);
                printmode(TRISTATE);
                printmode(COMPAT);
                printmode(EPP);
                printmode(ECP);
                printmode(DMA);
        }
#undef printmode
        printk("]\n");

        parport_announce_port(p);
        return p;

fail:
        if (p)
                parport_put_port(p);
        kfree(priv);
        kfree(ops);
        return ERR_PTR(err);
}

/**
 * parport_ip32_unregister_port - unregister a parallel port
 * @p:          pointer to the &struct parport
 *
 * Unregisters a parallel port and free previously allocated resources
 * (memory, IRQ, ...).
 */
static __exit void parport_ip32_unregister_port(struct parport *p)
{
        struct parport_ip32_private * const priv = p->physport->private_data;
        struct parport_operations *ops = p->ops;

        parport_remove_port(p);
        if (p->modes & PARPORT_MODE_DMA)
                parport_ip32_dma_unregister();
        if (p->irq != PARPORT_IRQ_NONE)
                free_irq(p->irq, p);
        parport_put_port(p);
        kfree(priv);
        kfree(ops);
}

/**
 * parport_ip32_init - module initialization function
 */
static int __init parport_ip32_init(void)
{
        pr_info(PPIP32 "SGI IP32 built-in parallel port driver v0.6\n");
        pr_debug1(PPIP32 "Compiled on %s, %s\n", __DATE__, __TIME__);
        this_port = parport_ip32_probe_port();
        return IS_ERR(this_port) ? PTR_ERR(this_port) : 0;
}

/**
 * parport_ip32_exit - module termination function
 */
static void __exit parport_ip32_exit(void)
{
        parport_ip32_unregister_port(this_port);
}

/*--- Module stuff -----------------------------------------------------*/

MODULE_AUTHOR("Arnaud Giersch <arnaud.giersch@free.fr>");
MODULE_DESCRIPTION("SGI IP32 built-in parallel port driver");
MODULE_LICENSE("GPL");
MODULE_VERSION("0.6");          /* update in parport_ip32_init() too */

module_init(parport_ip32_init);
module_exit(parport_ip32_exit);

module_param(verbose_probing, bool, S_IRUGO);
MODULE_PARM_DESC(verbose_probing, "Log chit-chat during initialization");

module_param(features, uint, S_IRUGO);
MODULE_PARM_DESC(features,
                 "Bit mask of features to enable"
                 ", bit 0: IRQ support"
                 ", bit 1: DMA support"
                 ", bit 2: hardware SPP mode"
                 ", bit 3: hardware EPP mode"
                 ", bit 4: hardware ECP mode");

/*--- Inform (X)Emacs about preferred coding style ---------------------*/
/*
 * Local Variables:
 * mode: c
 * c-file-style: "linux"
 * indent-tabs-mode: t
 * tab-width: 8
 * fill-column: 78
 * ispell-local-dictionary: "american"
 * End:
 */