md: removing typedefs: mdk_rdev_t -> struct md_rdev
[linux/fpc-iii.git] / drivers / mfd / db8500-prcmu-regs.h
blob3bbf04d58043cc84ea847d9f5834d802f124ba9d
1 /*
2 * Copyright (C) STMicroelectronics 2009
3 * Copyright (C) ST-Ericsson SA 2010
5 * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
6 * Author: Sundar Iyer <sundar.iyer@stericsson.com>
8 * License Terms: GNU General Public License v2
10 * PRCM Unit registers
12 #ifndef __DB8500_PRCMU_REGS_H
13 #define __DB8500_PRCMU_REGS_H
15 #include <linux/bitops.h>
16 #include <mach/hardware.h>
18 #define BITS(_start, _end) ((BIT(_end) - BIT(_start)) + BIT(_end))
20 #define PRCM_ARM_PLLDIVPS 0x118
21 #define PRCM_ARM_PLLDIVPS_ARM_BRM_RATE BITS(0, 5)
22 #define PRCM_ARM_PLLDIVPS_MAX_MASK 0xF
24 #define PRCM_PLLARM_LOCKP 0x0A8
25 #define PRCM_PLLARM_LOCKP_PRCM_PLLARM_LOCKP3 BIT(1)
27 #define PRCM_ARM_CHGCLKREQ 0x114
28 #define PRCM_ARM_CHGCLKREQ_PRCM_ARM_CHGCLKREQ BIT(0)
30 #define PRCM_PLLARM_ENABLE 0x98
31 #define PRCM_PLLARM_ENABLE_PRCM_PLLARM_ENABLE BIT(0)
32 #define PRCM_PLLARM_ENABLE_PRCM_PLLARM_COUNTON BIT(8)
34 #define PRCM_ARMCLKFIX_MGT 0x0
35 #define PRCM_A9_RESETN_CLR 0x1f4
36 #define PRCM_A9_RESETN_SET 0x1f0
37 #define PRCM_ARM_LS_CLAMP 0x30C
38 #define PRCM_SRAM_A9 0x308
40 /* ARM WFI Standby signal register */
41 #define PRCM_ARM_WFI_STANDBY 0x130
42 #define PRCM_IOCR 0x310
43 #define PRCM_IOCR_IOFORCE BIT(0)
45 /* CPU mailbox registers */
46 #define PRCM_MBOX_CPU_VAL 0x0FC
47 #define PRCM_MBOX_CPU_SET 0x100
49 /* Dual A9 core interrupt management unit registers */
50 #define PRCM_A9_MASK_REQ 0x328
51 #define PRCM_A9_MASK_REQ_PRCM_A9_MASK_REQ BIT(0)
53 #define PRCM_A9_MASK_ACK 0x32C
54 #define PRCM_ARMITMSK31TO0 0x11C
55 #define PRCM_ARMITMSK63TO32 0x120
56 #define PRCM_ARMITMSK95TO64 0x124
57 #define PRCM_ARMITMSK127TO96 0x128
58 #define PRCM_POWER_STATE_VAL 0x25C
59 #define PRCM_ARMITVAL31TO0 0x260
60 #define PRCM_ARMITVAL63TO32 0x264
61 #define PRCM_ARMITVAL95TO64 0x268
62 #define PRCM_ARMITVAL127TO96 0x26C
64 #define PRCM_HOSTACCESS_REQ 0x334
65 #define PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ BIT(0)
67 #define PRCM_ARM_IT1_CLR 0x48C
68 #define PRCM_ARM_IT1_VAL 0x494
70 #define PRCM_ITSTATUS0 0x148
71 #define PRCM_ITSTATUS1 0x150
72 #define PRCM_ITSTATUS2 0x158
73 #define PRCM_ITSTATUS3 0x160
74 #define PRCM_ITSTATUS4 0x168
75 #define PRCM_ITSTATUS5 0x484
76 #define PRCM_ITCLEAR5 0x488
77 #define PRCM_ARMIT_MASKXP70_IT 0x1018
79 /* System reset register */
80 #define PRCM_APE_SOFTRST 0x228
82 /* Level shifter and clamp control registers */
83 #define PRCM_MMIP_LS_CLAMP_SET 0x420
84 #define PRCM_MMIP_LS_CLAMP_CLR 0x424
86 /* PRCMU HW semaphore */
87 #define PRCM_SEM 0x400
88 #define PRCM_SEM_PRCM_SEM BIT(0)
90 /* PRCMU clock/PLL/reset registers */
91 #define PRCM_PLLDSI_FREQ 0x500
92 #define PRCM_PLLDSI_ENABLE 0x504
93 #define PRCM_PLLDSI_LOCKP 0x508
94 #define PRCM_DSI_PLLOUT_SEL 0x530
95 #define PRCM_DSITVCLK_DIV 0x52C
96 #define PRCM_APE_RESETN_SET 0x1E4
97 #define PRCM_APE_RESETN_CLR 0x1E8
99 #define PRCM_TCR 0x1C8
100 #define PRCM_TCR_TENSEL_MASK BITS(0, 7)
101 #define PRCM_TCR_STOP_TIMERS BIT(16)
102 #define PRCM_TCR_DOZE_MODE BIT(17)
104 #define PRCM_CLKOCR 0x1CC
105 #define PRCM_CLKOCR_CLKODIV0_SHIFT 0
106 #define PRCM_CLKOCR_CLKODIV0_MASK BITS(0, 5)
107 #define PRCM_CLKOCR_CLKOSEL0_SHIFT 6
108 #define PRCM_CLKOCR_CLKOSEL0_MASK BITS(6, 8)
109 #define PRCM_CLKOCR_CLKODIV1_SHIFT 16
110 #define PRCM_CLKOCR_CLKODIV1_MASK BITS(16, 21)
111 #define PRCM_CLKOCR_CLKOSEL1_SHIFT 22
112 #define PRCM_CLKOCR_CLKOSEL1_MASK BITS(22, 24)
113 #define PRCM_CLKOCR_CLK1TYPE BIT(28)
115 #define PRCM_SGACLK_MGT 0x014
116 #define PRCM_UARTCLK_MGT 0x018
117 #define PRCM_MSP02CLK_MGT 0x01C
118 #define PRCM_MSP1CLK_MGT 0x288
119 #define PRCM_I2CCLK_MGT 0x020
120 #define PRCM_SDMMCCLK_MGT 0x024
121 #define PRCM_SLIMCLK_MGT 0x028
122 #define PRCM_PER1CLK_MGT 0x02C
123 #define PRCM_PER2CLK_MGT 0x030
124 #define PRCM_PER3CLK_MGT 0x034
125 #define PRCM_PER5CLK_MGT 0x038
126 #define PRCM_PER6CLK_MGT 0x03C
127 #define PRCM_PER7CLK_MGT 0x040
128 #define PRCM_LCDCLK_MGT 0x044
129 #define PRCM_BMLCLK_MGT 0x04C
130 #define PRCM_HSITXCLK_MGT 0x050
131 #define PRCM_HSIRXCLK_MGT 0x054
132 #define PRCM_HDMICLK_MGT 0x058
133 #define PRCM_APEATCLK_MGT 0x05C
134 #define PRCM_APETRACECLK_MGT 0x060
135 #define PRCM_MCDECLK_MGT 0x064
136 #define PRCM_IPI2CCLK_MGT 0x068
137 #define PRCM_DSIALTCLK_MGT 0x06C
138 #define PRCM_DMACLK_MGT 0x074
139 #define PRCM_B2R2CLK_MGT 0x078
140 #define PRCM_TVCLK_MGT 0x07C
141 #define PRCM_UNIPROCLK_MGT 0x278
142 #define PRCM_SSPCLK_MGT 0x280
143 #define PRCM_RNGCLK_MGT 0x284
144 #define PRCM_UICCCLK_MGT 0x27C
146 #define PRCM_CLK_MGT_CLKPLLDIV_MASK BITS(0, 4)
147 #define PRCM_CLK_MGT_CLKPLLSW_MASK BITS(5, 7)
148 #define PRCM_CLK_MGT_CLKEN BIT(8)
150 /* ePOD and memory power signal control registers */
151 #define PRCM_EPOD_C_SET 0x410
152 #define PRCM_SRAM_LS_SLEEP 0x304
154 /* Debug power control unit registers */
155 #define PRCM_POWER_STATE_SET 0x254
157 /* Miscellaneous unit registers */
158 #define PRCM_DSI_SW_RESET 0x324
159 #define PRCM_GPIOCR 0x138
161 /* GPIOCR register */
162 #define PRCM_GPIOCR_SPI2_SELECT BIT(23)
164 #define PRCM_DDR_SUBSYS_APE_MINBW 0x438
166 #endif /* __DB8500_PRCMU_REGS_H */