drivers/net/ethernet/mellanox/mlx4/en_clock.c

   1 /*
   2  * Copyright (c) 2012 Mellanox Technologies. All rights reserved.
   3  *
   4  * This software is available to you under a choice of one of two
   5  * licenses.  You may choose to be licensed under the terms of the GNU
   6  * General Public License (GPL) Version 2, available from the file
   7  * COPYING in the main directory of this source tree, or the
   8  * OpenIB.org BSD license below:
   9  *
  10  *     Redistribution and use in source and binary forms, with or
  11  *     without modification, are permitted provided that the following
  12  *     conditions are met:
  13  *
  14  *      - Redistributions of source code must retain the above
  15  *        copyright notice, this list of conditions and the following
  16  *        disclaimer.
  17  *
  18  *      - Redistributions in binary form must reproduce the above
  19  *        copyright notice, this list of conditions and the following
  20  *        disclaimer in the documentation and/or other materials
  21  *        provided with the distribution.
  22  *
  23  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  24  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
  25  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  26  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
  27  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
  28  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
  29  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  30  * SOFTWARE.
  31  *
  32  */
  33
  34 #include <linux/mlx4/device.h>
  35 #include <linux/clocksource.h>
  36
  37 #include "mlx4_en.h"
  38
  39 /* mlx4_en_read_clock - read raw cycle counter (to be used by time counter)
  40  */
  41 static cycle_t mlx4_en_read_clock(const struct cyclecounter *tc)
  42 {
  43         struct mlx4_en_dev *mdev =
  44                 container_of(tc, struct mlx4_en_dev, cycles);
  45         struct mlx4_dev *dev = mdev->dev;
  46
  47         return mlx4_read_clock(dev) & tc->mask;
  48 }
  49
  50 u64 mlx4_en_get_cqe_ts(struct mlx4_cqe *cqe)
  51 {
  52         u64 hi, lo;
  53         struct mlx4_ts_cqe *ts_cqe = (struct mlx4_ts_cqe *)cqe;
  54
  55         lo = (u64)be16_to_cpu(ts_cqe->timestamp_lo);
  56         hi = ((u64)be32_to_cpu(ts_cqe->timestamp_hi) + !lo) << 16;
  57
  58         return hi | lo;
  59 }
  60
  61 void mlx4_en_fill_hwtstamps(struct mlx4_en_dev *mdev,
  62                             struct skb_shared_hwtstamps *hwts,
  63                             u64 timestamp)
  64 {
  65         unsigned long flags;
  66         u64 nsec;
  67
  68         read_lock_irqsave(&mdev->clock_lock, flags);
  69         nsec = timecounter_cyc2time(&mdev->clock, timestamp);
  70         read_unlock_irqrestore(&mdev->clock_lock, flags);
  71
  72         memset(hwts, 0, sizeof(struct skb_shared_hwtstamps));
  73         hwts->hwtstamp = ns_to_ktime(nsec);
  74 }
  75
  76 /**
  77  * mlx4_en_remove_timestamp - disable PTP device
  78  * @mdev: board private structure
  79  *
  80  * Stop the PTP support.
  81  **/
  82 void mlx4_en_remove_timestamp(struct mlx4_en_dev *mdev)
  83 {
  84         if (mdev->ptp_clock) {
  85                 ptp_clock_unregister(mdev->ptp_clock);
  86                 mdev->ptp_clock = NULL;
  87                 mlx4_info(mdev, "removed PHC\n");
  88         }
  89 }
  90
  91 void mlx4_en_ptp_overflow_check(struct mlx4_en_dev *mdev)
  92 {
  93         bool timeout = time_is_before_jiffies(mdev->last_overflow_check +
  94                                               mdev->overflow_period);
  95         unsigned long flags;
  96
  97         if (timeout) {
  98                 write_lock_irqsave(&mdev->clock_lock, flags);
  99                 timecounter_read(&mdev->clock);
 100                 write_unlock_irqrestore(&mdev->clock_lock, flags);
 101                 mdev->last_overflow_check = jiffies;
 102         }
 103 }
 104
 105 /**
 106  * mlx4_en_phc_adjfreq - adjust the frequency of the hardware clock
 107  * @ptp: ptp clock structure
 108  * @delta: Desired frequency change in parts per billion
 109  *
 110  * Adjust the frequency of the PHC cycle counter by the indicated delta from
 111  * the base frequency.
 112  **/
 113 static int mlx4_en_phc_adjfreq(struct ptp_clock_info *ptp, s32 delta)
 114 {
 115         u64 adj;
 116         u32 diff, mult;
 117         int neg_adj = 0;
 118         unsigned long flags;
 119         struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev,
 120                                                 ptp_clock_info);
 121
 122         if (delta < 0) {
 123                 neg_adj = 1;
 124                 delta = -delta;
 125         }
 126         mult = mdev->nominal_c_mult;
 127         adj = mult;
 128         adj *= delta;
 129         diff = div_u64(adj, 1000000000ULL);
 130
 131         write_lock_irqsave(&mdev->clock_lock, flags);
 132         timecounter_read(&mdev->clock);
 133         mdev->cycles.mult = neg_adj ? mult - diff : mult + diff;
 134         write_unlock_irqrestore(&mdev->clock_lock, flags);
 135
 136         return 0;
 137 }
 138
 139 /**
 140  * mlx4_en_phc_adjtime - Shift the time of the hardware clock
 141  * @ptp: ptp clock structure
 142  * @delta: Desired change in nanoseconds
 143  *
 144  * Adjust the timer by resetting the timecounter structure.
 145  **/
 146 static int mlx4_en_phc_adjtime(struct ptp_clock_info *ptp, s64 delta)
 147 {
 148         struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev,
 149                                                 ptp_clock_info);
 150         unsigned long flags;
 151
 152         write_lock_irqsave(&mdev->clock_lock, flags);
 153         timecounter_adjtime(&mdev->clock, delta);
 154         write_unlock_irqrestore(&mdev->clock_lock, flags);
 155
 156         return 0;
 157 }
 158
 159 /**
 160  * mlx4_en_phc_gettime - Reads the current time from the hardware clock
 161  * @ptp: ptp clock structure
 162  * @ts: timespec structure to hold the current time value
 163  *
 164  * Read the timecounter and return the correct value in ns after converting
 165  * it into a struct timespec.
 166  **/
 167 static int mlx4_en_phc_gettime(struct ptp_clock_info *ptp,
 168                                struct timespec64 *ts)
 169 {
 170         struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev,
 171                                                 ptp_clock_info);
 172         unsigned long flags;
 173         u64 ns;
 174
 175         write_lock_irqsave(&mdev->clock_lock, flags);
 176         ns = timecounter_read(&mdev->clock);
 177         write_unlock_irqrestore(&mdev->clock_lock, flags);
 178
 179         *ts = ns_to_timespec64(ns);
 180
 181         return 0;
 182 }
 183
 184 /**
 185  * mlx4_en_phc_settime - Set the current time on the hardware clock
 186  * @ptp: ptp clock structure
 187  * @ts: timespec containing the new time for the cycle counter
 188  *
 189  * Reset the timecounter to use a new base value instead of the kernel
 190  * wall timer value.
 191  **/
 192 static int mlx4_en_phc_settime(struct ptp_clock_info *ptp,
 193                                const struct timespec64 *ts)
 194 {
 195         struct mlx4_en_dev *mdev = container_of(ptp, struct mlx4_en_dev,
 196                                                 ptp_clock_info);
 197         u64 ns = timespec64_to_ns(ts);
 198         unsigned long flags;
 199
 200         /* reset the timecounter */
 201         write_lock_irqsave(&mdev->clock_lock, flags);
 202         timecounter_init(&mdev->clock, &mdev->cycles, ns);
 203         write_unlock_irqrestore(&mdev->clock_lock, flags);
 204
 205         return 0;
 206 }
 207
 208 /**
 209  * mlx4_en_phc_enable - enable or disable an ancillary feature
 210  * @ptp: ptp clock structure
 211  * @request: Desired resource to enable or disable
 212  * @on: Caller passes one to enable or zero to disable
 213  *
 214  * Enable (or disable) ancillary features of the PHC subsystem.
 215  * Currently, no ancillary features are supported.
 216  **/
 217 static int mlx4_en_phc_enable(struct ptp_clock_info __always_unused *ptp,
 218                               struct ptp_clock_request __always_unused *request,
 219                               int __always_unused on)
 220 {
 221         return -EOPNOTSUPP;
 222 }
 223
 224 static const struct ptp_clock_info mlx4_en_ptp_clock_info = {
 225         .owner          = THIS_MODULE,
 226         .max_adj        = 100000000,
 227         .n_alarm        = 0,
 228         .n_ext_ts       = 0,
 229         .n_per_out      = 0,
 230         .n_pins         = 0,
 231         .pps            = 0,
 232         .adjfreq        = mlx4_en_phc_adjfreq,
 233         .adjtime        = mlx4_en_phc_adjtime,
 234         .gettime64      = mlx4_en_phc_gettime,
 235         .settime64      = mlx4_en_phc_settime,
 236         .enable         = mlx4_en_phc_enable,
 237 };
 238
 239 void mlx4_en_init_timestamp(struct mlx4_en_dev *mdev)
 240 {
 241         struct mlx4_dev *dev = mdev->dev;
 242         unsigned long flags;
 243         u64 ns, zero = 0;
 244
 245         /* mlx4_en_init_timestamp is called for each netdev.
 246          * mdev->ptp_clock is common for all ports, skip initialization if
 247          * was done for other port.
 248          */
 249         if (mdev->ptp_clock)
 250                 return;
 251
 252         rwlock_init(&mdev->clock_lock);
 253
 254         memset(&mdev->cycles, 0, sizeof(mdev->cycles));
 255         mdev->cycles.read = mlx4_en_read_clock;
 256         mdev->cycles.mask = CLOCKSOURCE_MASK(48);
 257         /* Using shift to make calculation more accurate. Since current HW
 258          * clock frequency is 427 MHz, and cycles are given using a 48 bits
 259          * register, the biggest shift when calculating using u64, is 14
 260          * (max_cycles * multiplier < 2^64)
 261          */
 262         mdev->cycles.shift = 14;
 263         mdev->cycles.mult =
 264                 clocksource_khz2mult(1000 * dev->caps.hca_core_clock, mdev->cycles.shift);
 265         mdev->nominal_c_mult = mdev->cycles.mult;
 266
 267         write_lock_irqsave(&mdev->clock_lock, flags);
 268         timecounter_init(&mdev->clock, &mdev->cycles,
 269                          ktime_to_ns(ktime_get_real()));
 270         write_unlock_irqrestore(&mdev->clock_lock, flags);
 271
 272         /* Calculate period in seconds to call the overflow watchdog - to make
 273          * sure counter is checked at least once every wrap around.
 274          */
 275         ns = cyclecounter_cyc2ns(&mdev->cycles, mdev->cycles.mask, zero, &zero);
 276         do_div(ns, NSEC_PER_SEC / 2 / HZ);
 277         mdev->overflow_period = ns;
 278
 279         /* Configure the PHC */
 280         mdev->ptp_clock_info = mlx4_en_ptp_clock_info;
 281         snprintf(mdev->ptp_clock_info.name, 16, "mlx4 ptp");
 282
 283         mdev->ptp_clock = ptp_clock_register(&mdev->ptp_clock_info,
 284                                              &mdev->pdev->dev);
 285         if (IS_ERR(mdev->ptp_clock)) {
 286                 mdev->ptp_clock = NULL;
 287                 mlx4_err(mdev, "ptp_clock_register failed\n");
 288         } else {
 289                 mlx4_info(mdev, "registered PHC clock\n");
 290         }
 291
 292 }