?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
[linux/fpc-iii.git] / drivers / vme / bridges / vme_tsi148.c
blob60524834dba31b82237b92990f80c30868b33253
1 /*
2 * Support for the Tundra TSI148 VME-PCI Bridge Chip
3 *
4 * Author: Martyn Welch <martyn.welch@ge.com>
5 * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
6 *
7 * Based on work by Tom Armistead and Ajit Prem
8 * Copyright 2004 Motorola Inc.
9 *
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by the
12 * Free Software Foundation; either version 2 of the License, or (at your
13 * option) any later version.
14 */
15
16 #include <linux/module.h>
17 #include <linux/moduleparam.h>
18 #include <linux/mm.h>
19 #include <linux/types.h>
20 #include <linux/errno.h>
21 #include <linux/proc_fs.h>
22 #include <linux/pci.h>
23 #include <linux/poll.h>
24 #include <linux/dma-mapping.h>
25 #include <linux/interrupt.h>
26 #include <linux/spinlock.h>
27 #include <linux/sched.h>
28 #include <linux/slab.h>
29 #include <linux/time.h>
30 #include <linux/io.h>
31 #include <linux/uaccess.h>
32 #include <linux/byteorder/generic.h>
33 #include <linux/vme.h>
34
35 #include "../vme_bridge.h"
36 #include "vme_tsi148.h"
37
38 static int tsi148_probe(struct pci_dev *, const struct pci_device_id *);
39 static void tsi148_remove(struct pci_dev *);
40
41
42 /* Module parameter */
43 static bool err_chk;
44 static int geoid;
45
46 static const char driver_name[] = "vme_tsi148";
47
48 static const struct pci_device_id tsi148_ids[] = {
49 { PCI_DEVICE(PCI_VENDOR_ID_TUNDRA, PCI_DEVICE_ID_TUNDRA_TSI148) },
50 { },
51 };
52
53 static struct pci_driver tsi148_driver = {
54 .name = driver_name,
55 .id_table = tsi148_ids,
56 .probe = tsi148_probe,
57 .remove = tsi148_remove,
58 };
59
60 static void reg_join(unsigned int high, unsigned int low,
61 unsigned long long *variable)
62 {
63 *variable = (unsigned long long)high << 32;
64 *variable |= (unsigned long long)low;
65 }
66
67 static void reg_split(unsigned long long variable, unsigned int *high,
68 unsigned int *low)
69 {
70 *low = (unsigned int)variable & 0xFFFFFFFF;
71 *high = (unsigned int)(variable >> 32);
72 }
73
74 /*
75 * Wakes up DMA queue.
76 */
77 static u32 tsi148_DMA_irqhandler(struct tsi148_driver *bridge,
78 int channel_mask)
79 {
80 u32 serviced = 0;
81
82 if (channel_mask & TSI148_LCSR_INTS_DMA0S) {
83 wake_up(&bridge->dma_queue[0]);
84 serviced |= TSI148_LCSR_INTC_DMA0C;
85 }
86 if (channel_mask & TSI148_LCSR_INTS_DMA1S) {
87 wake_up(&bridge->dma_queue[1]);
88 serviced |= TSI148_LCSR_INTC_DMA1C;
89 }
90
91 return serviced;
92 }
93
94 /*
95 * Wake up location monitor queue
96 */
97 static u32 tsi148_LM_irqhandler(struct tsi148_driver *bridge, u32 stat)
98 {
99 int i;
100 u32 serviced = 0;
101
102 for (i = 0; i < 4; i++) {
103 if (stat & TSI148_LCSR_INTS_LMS[i]) {
104 /* We only enable interrupts if the callback is set */
105 bridge->lm_callback[i](i);
106 serviced |= TSI148_LCSR_INTC_LMC[i];
107 }
108 }
109
110 return serviced;
111 }
112
113 /*
114 * Wake up mail box queue.
115 *
116 * XXX This functionality is not exposed up though API.
117 */
118 static u32 tsi148_MB_irqhandler(struct vme_bridge *tsi148_bridge, u32 stat)
119 {
120 int i;
121 u32 val;
122 u32 serviced = 0;
123 struct tsi148_driver *bridge;
124
125 bridge = tsi148_bridge->driver_priv;
126
127 for (i = 0; i < 4; i++) {
128 if (stat & TSI148_LCSR_INTS_MBS[i]) {
129 val = ioread32be(bridge->base + TSI148_GCSR_MBOX[i]);
130 dev_err(tsi148_bridge->parent, "VME Mailbox %d received"
131 ": 0x%x\n", i, val);
132 serviced |= TSI148_LCSR_INTC_MBC[i];
133 }
134 }
135
136 return serviced;
137 }
138
139 /*
140 * Display error & status message when PERR (PCI) exception interrupt occurs.
141 */
142 static u32 tsi148_PERR_irqhandler(struct vme_bridge *tsi148_bridge)
143 {
144 struct tsi148_driver *bridge;
145
146 bridge = tsi148_bridge->driver_priv;
147
148 dev_err(tsi148_bridge->parent, "PCI Exception at address: 0x%08x:%08x, "
149 "attributes: %08x\n",
150 ioread32be(bridge->base + TSI148_LCSR_EDPAU),
151 ioread32be(bridge->base + TSI148_LCSR_EDPAL),
152 ioread32be(bridge->base + TSI148_LCSR_EDPAT));
153
154 dev_err(tsi148_bridge->parent, "PCI-X attribute reg: %08x, PCI-X split "
155 "completion reg: %08x\n",
156 ioread32be(bridge->base + TSI148_LCSR_EDPXA),
157 ioread32be(bridge->base + TSI148_LCSR_EDPXS));
158
159 iowrite32be(TSI148_LCSR_EDPAT_EDPCL, bridge->base + TSI148_LCSR_EDPAT);
160
161 return TSI148_LCSR_INTC_PERRC;
162 }
163
164 /*
165 * Save address and status when VME error interrupt occurs.
166 */
167 static u32 tsi148_VERR_irqhandler(struct vme_bridge *tsi148_bridge)
168 {
169 unsigned int error_addr_high, error_addr_low;
170 unsigned long long error_addr;
171 u32 error_attrib;
172 int error_am;
173 struct tsi148_driver *bridge;
174
175 bridge = tsi148_bridge->driver_priv;
176
177 error_addr_high = ioread32be(bridge->base + TSI148_LCSR_VEAU);
178 error_addr_low = ioread32be(bridge->base + TSI148_LCSR_VEAL);
179 error_attrib = ioread32be(bridge->base + TSI148_LCSR_VEAT);
180 error_am = (error_attrib & TSI148_LCSR_VEAT_AM_M) >> 8;
181
182 reg_join(error_addr_high, error_addr_low, &error_addr);
183
184 /* Check for exception register overflow (we have lost error data) */
185 if (error_attrib & TSI148_LCSR_VEAT_VEOF) {
186 dev_err(tsi148_bridge->parent, "VME Bus Exception Overflow "
187 "Occurred\n");
188 }
189
190 if (err_chk)
191 vme_bus_error_handler(tsi148_bridge, error_addr, error_am);
192 else
193 dev_err(tsi148_bridge->parent,
194 "VME Bus Error at address: 0x%llx, attributes: %08x\n",
195 error_addr, error_attrib);
196
197 /* Clear Status */
198 iowrite32be(TSI148_LCSR_VEAT_VESCL, bridge->base + TSI148_LCSR_VEAT);
199
200 return TSI148_LCSR_INTC_VERRC;
201 }
202
203 /*
204 * Wake up IACK queue.
205 */
206 static u32 tsi148_IACK_irqhandler(struct tsi148_driver *bridge)
207 {
208 wake_up(&bridge->iack_queue);
209
210 return TSI148_LCSR_INTC_IACKC;
211 }
212
213 /*
214 * Calling VME bus interrupt callback if provided.
215 */
216 static u32 tsi148_VIRQ_irqhandler(struct vme_bridge *tsi148_bridge,
217 u32 stat)
218 {
219 int vec, i, serviced = 0;
220 struct tsi148_driver *bridge;
221
222 bridge = tsi148_bridge->driver_priv;
223
224 for (i = 7; i > 0; i--) {
225 if (stat & (1 << i)) {
226 /*
227 * Note: Even though the registers are defined as
228 * 32-bits in the spec, we only want to issue 8-bit
229 * IACK cycles on the bus, read from offset 3.
230 */
231 vec = ioread8(bridge->base + TSI148_LCSR_VIACK[i] + 3);
232
233 vme_irq_handler(tsi148_bridge, i, vec);
234
235 serviced |= (1 << i);
236 }
237 }
238
239 return serviced;
240 }
241
242 /*
243 * Top level interrupt handler. Clears appropriate interrupt status bits and
244 * then calls appropriate sub handler(s).
245 */
246 static irqreturn_t tsi148_irqhandler(int irq, void *ptr)
247 {
248 u32 stat, enable, serviced = 0;
249 struct vme_bridge *tsi148_bridge;
250 struct tsi148_driver *bridge;
251
252 tsi148_bridge = ptr;
253
254 bridge = tsi148_bridge->driver_priv;
255
256 /* Determine which interrupts are unmasked and set */
257 enable = ioread32be(bridge->base + TSI148_LCSR_INTEO);
258 stat = ioread32be(bridge->base + TSI148_LCSR_INTS);
259
260 /* Only look at unmasked interrupts */
261 stat &= enable;
262
263 if (unlikely(!stat))
264 return IRQ_NONE;
265
266 /* Call subhandlers as appropriate */
267 /* DMA irqs */
268 if (stat & (TSI148_LCSR_INTS_DMA1S | TSI148_LCSR_INTS_DMA0S))
269 serviced |= tsi148_DMA_irqhandler(bridge, stat);
270
271 /* Location monitor irqs */
272 if (stat & (TSI148_LCSR_INTS_LM3S | TSI148_LCSR_INTS_LM2S |
273 TSI148_LCSR_INTS_LM1S | TSI148_LCSR_INTS_LM0S))
274 serviced |= tsi148_LM_irqhandler(bridge, stat);
275
276 /* Mail box irqs */
277 if (stat & (TSI148_LCSR_INTS_MB3S | TSI148_LCSR_INTS_MB2S |
278 TSI148_LCSR_INTS_MB1S | TSI148_LCSR_INTS_MB0S))
279 serviced |= tsi148_MB_irqhandler(tsi148_bridge, stat);
280
281 /* PCI bus error */
282 if (stat & TSI148_LCSR_INTS_PERRS)
283 serviced |= tsi148_PERR_irqhandler(tsi148_bridge);
284
285 /* VME bus error */
286 if (stat & TSI148_LCSR_INTS_VERRS)
287 serviced |= tsi148_VERR_irqhandler(tsi148_bridge);
288
289 /* IACK irq */
290 if (stat & TSI148_LCSR_INTS_IACKS)
291 serviced |= tsi148_IACK_irqhandler(bridge);
292
293 /* VME bus irqs */
294 if (stat & (TSI148_LCSR_INTS_IRQ7S | TSI148_LCSR_INTS_IRQ6S |
295 TSI148_LCSR_INTS_IRQ5S | TSI148_LCSR_INTS_IRQ4S |
296 TSI148_LCSR_INTS_IRQ3S | TSI148_LCSR_INTS_IRQ2S |
297 TSI148_LCSR_INTS_IRQ1S))
298 serviced |= tsi148_VIRQ_irqhandler(tsi148_bridge, stat);
299
300 /* Clear serviced interrupts */
301 iowrite32be(serviced, bridge->base + TSI148_LCSR_INTC);
302
303 return IRQ_HANDLED;
304 }
305
306 static int tsi148_irq_init(struct vme_bridge *tsi148_bridge)
307 {
308 int result;
309 unsigned int tmp;
310 struct pci_dev *pdev;
311 struct tsi148_driver *bridge;
312
313 pdev = to_pci_dev(tsi148_bridge->parent);
314
315 bridge = tsi148_bridge->driver_priv;
316
317 INIT_LIST_HEAD(&tsi148_bridge->vme_error_handlers);
318
319 mutex_init(&tsi148_bridge->irq_mtx);
320
321 result = request_irq(pdev->irq,
322 tsi148_irqhandler,
323 IRQF_SHARED,
324 driver_name, tsi148_bridge);
325 if (result) {
326 dev_err(tsi148_bridge->parent, "Can't get assigned pci irq "
327 "vector %02X\n", pdev->irq);
328 return result;
329 }
330
331 /* Enable and unmask interrupts */
332 tmp = TSI148_LCSR_INTEO_DMA1EO | TSI148_LCSR_INTEO_DMA0EO |
333 TSI148_LCSR_INTEO_MB3EO | TSI148_LCSR_INTEO_MB2EO |
334 TSI148_LCSR_INTEO_MB1EO | TSI148_LCSR_INTEO_MB0EO |
335 TSI148_LCSR_INTEO_PERREO | TSI148_LCSR_INTEO_VERREO |
336 TSI148_LCSR_INTEO_IACKEO;
337
338 /* This leaves the following interrupts masked.
339 * TSI148_LCSR_INTEO_VIEEO
340 * TSI148_LCSR_INTEO_SYSFLEO
341 * TSI148_LCSR_INTEO_ACFLEO
342 */
343
344 /* Don't enable Location Monitor interrupts here - they will be
345 * enabled when the location monitors are properly configured and
346 * a callback has been attached.
347 * TSI148_LCSR_INTEO_LM0EO
348 * TSI148_LCSR_INTEO_LM1EO
349 * TSI148_LCSR_INTEO_LM2EO
350 * TSI148_LCSR_INTEO_LM3EO
351 */
352
353 /* Don't enable VME interrupts until we add a handler, else the board
354 * will respond to it and we don't want that unless it knows how to
355 * properly deal with it.
356 * TSI148_LCSR_INTEO_IRQ7EO
357 * TSI148_LCSR_INTEO_IRQ6EO
358 * TSI148_LCSR_INTEO_IRQ5EO
359 * TSI148_LCSR_INTEO_IRQ4EO
360 * TSI148_LCSR_INTEO_IRQ3EO
361 * TSI148_LCSR_INTEO_IRQ2EO
362 * TSI148_LCSR_INTEO_IRQ1EO
363 */
364
365 iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEO);
366 iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEN);
367
368 return 0;
369 }
370
371 static void tsi148_irq_exit(struct vme_bridge *tsi148_bridge,
372 struct pci_dev *pdev)
373 {
374 struct tsi148_driver *bridge = tsi148_bridge->driver_priv;
375
376 /* Turn off interrupts */
377 iowrite32be(0x0, bridge->base + TSI148_LCSR_INTEO);
378 iowrite32be(0x0, bridge->base + TSI148_LCSR_INTEN);
379
380 /* Clear all interrupts */
381 iowrite32be(0xFFFFFFFF, bridge->base + TSI148_LCSR_INTC);
382
383 /* Detach interrupt handler */
384 free_irq(pdev->irq, tsi148_bridge);
385 }
386
387 /*
388 * Check to see if an IACk has been received, return true (1) or false (0).
389 */
390 static int tsi148_iack_received(struct tsi148_driver *bridge)
391 {
392 u32 tmp;
393
394 tmp = ioread32be(bridge->base + TSI148_LCSR_VICR);
395
396 if (tmp & TSI148_LCSR_VICR_IRQS)
397 return 0;
398 else
399 return 1;
400 }
401
402 /*
403 * Configure VME interrupt
404 */
405 static void tsi148_irq_set(struct vme_bridge *tsi148_bridge, int level,
406 int state, int sync)
407 {
408 struct pci_dev *pdev;
409 u32 tmp;
410 struct tsi148_driver *bridge;
411
412 bridge = tsi148_bridge->driver_priv;
413
414 /* We need to do the ordering differently for enabling and disabling */
415 if (state == 0) {
416 tmp = ioread32be(bridge->base + TSI148_LCSR_INTEN);
417 tmp &= ~TSI148_LCSR_INTEN_IRQEN[level - 1];
418 iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEN);
419
420 tmp = ioread32be(bridge->base + TSI148_LCSR_INTEO);
421 tmp &= ~TSI148_LCSR_INTEO_IRQEO[level - 1];
422 iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEO);
423
424 if (sync != 0) {
425 pdev = to_pci_dev(tsi148_bridge->parent);
426 synchronize_irq(pdev->irq);
427 }
428 } else {
429 tmp = ioread32be(bridge->base + TSI148_LCSR_INTEO);
430 tmp |= TSI148_LCSR_INTEO_IRQEO[level - 1];
431 iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEO);
432
433 tmp = ioread32be(bridge->base + TSI148_LCSR_INTEN);
434 tmp |= TSI148_LCSR_INTEN_IRQEN[level - 1];
435 iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEN);
436 }
437 }
438
439 /*
440 * Generate a VME bus interrupt at the requested level & vector. Wait for
441 * interrupt to be acked.
442 */
443 static int tsi148_irq_generate(struct vme_bridge *tsi148_bridge, int level,
444 int statid)
445 {
446 u32 tmp;
447 struct tsi148_driver *bridge;
448
449 bridge = tsi148_bridge->driver_priv;
450
451 mutex_lock(&bridge->vme_int);
452
453 /* Read VICR register */
454 tmp = ioread32be(bridge->base + TSI148_LCSR_VICR);
455
456 /* Set Status/ID */
457 tmp = (tmp & ~TSI148_LCSR_VICR_STID_M) |
458 (statid & TSI148_LCSR_VICR_STID_M);
459 iowrite32be(tmp, bridge->base + TSI148_LCSR_VICR);
460
461 /* Assert VMEbus IRQ */
462 tmp = tmp | TSI148_LCSR_VICR_IRQL[level];
463 iowrite32be(tmp, bridge->base + TSI148_LCSR_VICR);
464
465 /* XXX Consider implementing a timeout? */
466 wait_event_interruptible(bridge->iack_queue,
467 tsi148_iack_received(bridge));
468
469 mutex_unlock(&bridge->vme_int);
470
471 return 0;
472 }
473
474 /*
475 * Initialize a slave window with the requested attributes.
476 */
477 static int tsi148_slave_set(struct vme_slave_resource *image, int enabled,
478 unsigned long long vme_base, unsigned long long size,
479 dma_addr_t pci_base, u32 aspace, u32 cycle)
480 {
481 unsigned int i, addr = 0, granularity = 0;
482 unsigned int temp_ctl = 0;
483 unsigned int vme_base_low, vme_base_high;
484 unsigned int vme_bound_low, vme_bound_high;
485 unsigned int pci_offset_low, pci_offset_high;
486 unsigned long long vme_bound, pci_offset;
487 struct vme_bridge *tsi148_bridge;
488 struct tsi148_driver *bridge;
489
490 tsi148_bridge = image->parent;
491 bridge = tsi148_bridge->driver_priv;
492
493 i = image->number;
494
495 switch (aspace) {
496 case VME_A16:
497 granularity = 0x10;
498 addr |= TSI148_LCSR_ITAT_AS_A16;
499 break;
500 case VME_A24:
501 granularity = 0x1000;
502 addr |= TSI148_LCSR_ITAT_AS_A24;
503 break;
504 case VME_A32:
505 granularity = 0x10000;
506 addr |= TSI148_LCSR_ITAT_AS_A32;
507 break;
508 case VME_A64:
509 granularity = 0x10000;
510 addr |= TSI148_LCSR_ITAT_AS_A64;
511 break;
512 default:
513 dev_err(tsi148_bridge->parent, "Invalid address space\n");
514 return -EINVAL;
515 break;
516 }
517
518 /* Convert 64-bit variables to 2x 32-bit variables */
519 reg_split(vme_base, &vme_base_high, &vme_base_low);
520
521 /*
522 * Bound address is a valid address for the window, adjust
523 * accordingly
524 */
525 vme_bound = vme_base + size - granularity;
526 reg_split(vme_bound, &vme_bound_high, &vme_bound_low);
527 pci_offset = (unsigned long long)pci_base - vme_base;
528 reg_split(pci_offset, &pci_offset_high, &pci_offset_low);
529
530 if (vme_base_low & (granularity - 1)) {
531 dev_err(tsi148_bridge->parent, "Invalid VME base alignment\n");
532 return -EINVAL;
533 }
534 if (vme_bound_low & (granularity - 1)) {
535 dev_err(tsi148_bridge->parent, "Invalid VME bound alignment\n");
536 return -EINVAL;
537 }
538 if (pci_offset_low & (granularity - 1)) {
539 dev_err(tsi148_bridge->parent, "Invalid PCI Offset "
540 "alignment\n");
541 return -EINVAL;
542 }
543
544 /* Disable while we are mucking around */
545 temp_ctl = ioread32be(bridge->base + TSI148_LCSR_IT[i] +
546 TSI148_LCSR_OFFSET_ITAT);
547 temp_ctl &= ~TSI148_LCSR_ITAT_EN;
548 iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_IT[i] +
549 TSI148_LCSR_OFFSET_ITAT);
550
551 /* Setup mapping */
552 iowrite32be(vme_base_high, bridge->base + TSI148_LCSR_IT[i] +
553 TSI148_LCSR_OFFSET_ITSAU);
554 iowrite32be(vme_base_low, bridge->base + TSI148_LCSR_IT[i] +
555 TSI148_LCSR_OFFSET_ITSAL);
556 iowrite32be(vme_bound_high, bridge->base + TSI148_LCSR_IT[i] +
557 TSI148_LCSR_OFFSET_ITEAU);
558 iowrite32be(vme_bound_low, bridge->base + TSI148_LCSR_IT[i] +
559 TSI148_LCSR_OFFSET_ITEAL);
560 iowrite32be(pci_offset_high, bridge->base + TSI148_LCSR_IT[i] +
561 TSI148_LCSR_OFFSET_ITOFU);
562 iowrite32be(pci_offset_low, bridge->base + TSI148_LCSR_IT[i] +
563 TSI148_LCSR_OFFSET_ITOFL);
564
565 /* Setup 2eSST speeds */
566 temp_ctl &= ~TSI148_LCSR_ITAT_2eSSTM_M;
567 switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) {
568 case VME_2eSST160:
569 temp_ctl |= TSI148_LCSR_ITAT_2eSSTM_160;
570 break;
571 case VME_2eSST267:
572 temp_ctl |= TSI148_LCSR_ITAT_2eSSTM_267;
573 break;
574 case VME_2eSST320:
575 temp_ctl |= TSI148_LCSR_ITAT_2eSSTM_320;
576 break;
577 }
578
579 /* Setup cycle types */
580 temp_ctl &= ~(0x1F << 7);
581 if (cycle & VME_BLT)
582 temp_ctl |= TSI148_LCSR_ITAT_BLT;
583 if (cycle & VME_MBLT)
584 temp_ctl |= TSI148_LCSR_ITAT_MBLT;
585 if (cycle & VME_2eVME)
586 temp_ctl |= TSI148_LCSR_ITAT_2eVME;
587 if (cycle & VME_2eSST)
588 temp_ctl |= TSI148_LCSR_ITAT_2eSST;
589 if (cycle & VME_2eSSTB)
590 temp_ctl |= TSI148_LCSR_ITAT_2eSSTB;
591
592 /* Setup address space */
593 temp_ctl &= ~TSI148_LCSR_ITAT_AS_M;
594 temp_ctl |= addr;
595
596 temp_ctl &= ~0xF;
597 if (cycle & VME_SUPER)
598 temp_ctl |= TSI148_LCSR_ITAT_SUPR ;
599 if (cycle & VME_USER)
600 temp_ctl |= TSI148_LCSR_ITAT_NPRIV;
601 if (cycle & VME_PROG)
602 temp_ctl |= TSI148_LCSR_ITAT_PGM;
603 if (cycle & VME_DATA)
604 temp_ctl |= TSI148_LCSR_ITAT_DATA;
605
606 /* Write ctl reg without enable */
607 iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_IT[i] +
608 TSI148_LCSR_OFFSET_ITAT);
609
610 if (enabled)
611 temp_ctl |= TSI148_LCSR_ITAT_EN;
612
613 iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_IT[i] +
614 TSI148_LCSR_OFFSET_ITAT);
615
616 return 0;
617 }
618
619 /*
620 * Get slave window configuration.
621 */
622 static int tsi148_slave_get(struct vme_slave_resource *image, int *enabled,
623 unsigned long long *vme_base, unsigned long long *size,
624 dma_addr_t *pci_base, u32 *aspace, u32 *cycle)
625 {
626 unsigned int i, granularity = 0, ctl = 0;
627 unsigned int vme_base_low, vme_base_high;
628 unsigned int vme_bound_low, vme_bound_high;
629 unsigned int pci_offset_low, pci_offset_high;
630 unsigned long long vme_bound, pci_offset;
631 struct tsi148_driver *bridge;
632
633 bridge = image->parent->driver_priv;
634
635 i = image->number;
636
637 /* Read registers */
638 ctl = ioread32be(bridge->base + TSI148_LCSR_IT[i] +
639 TSI148_LCSR_OFFSET_ITAT);
640
641 vme_base_high = ioread32be(bridge->base + TSI148_LCSR_IT[i] +
642 TSI148_LCSR_OFFSET_ITSAU);
643 vme_base_low = ioread32be(bridge->base + TSI148_LCSR_IT[i] +
644 TSI148_LCSR_OFFSET_ITSAL);
645 vme_bound_high = ioread32be(bridge->base + TSI148_LCSR_IT[i] +
646 TSI148_LCSR_OFFSET_ITEAU);
647 vme_bound_low = ioread32be(bridge->base + TSI148_LCSR_IT[i] +
648 TSI148_LCSR_OFFSET_ITEAL);
649 pci_offset_high = ioread32be(bridge->base + TSI148_LCSR_IT[i] +
650 TSI148_LCSR_OFFSET_ITOFU);
651 pci_offset_low = ioread32be(bridge->base + TSI148_LCSR_IT[i] +
652 TSI148_LCSR_OFFSET_ITOFL);
653
654 /* Convert 64-bit variables to 2x 32-bit variables */
655 reg_join(vme_base_high, vme_base_low, vme_base);
656 reg_join(vme_bound_high, vme_bound_low, &vme_bound);
657 reg_join(pci_offset_high, pci_offset_low, &pci_offset);
658
659 *pci_base = (dma_addr_t)(*vme_base + pci_offset);
660
661 *enabled = 0;
662 *aspace = 0;
663 *cycle = 0;
664
665 if (ctl & TSI148_LCSR_ITAT_EN)
666 *enabled = 1;
667
668 if ((ctl & TSI148_LCSR_ITAT_AS_M) == TSI148_LCSR_ITAT_AS_A16) {
669 granularity = 0x10;
670 *aspace |= VME_A16;
671 }
672 if ((ctl & TSI148_LCSR_ITAT_AS_M) == TSI148_LCSR_ITAT_AS_A24) {
673 granularity = 0x1000;
674 *aspace |= VME_A24;
675 }
676 if ((ctl & TSI148_LCSR_ITAT_AS_M) == TSI148_LCSR_ITAT_AS_A32) {
677 granularity = 0x10000;
678 *aspace |= VME_A32;
679 }
680 if ((ctl & TSI148_LCSR_ITAT_AS_M) == TSI148_LCSR_ITAT_AS_A64) {
681 granularity = 0x10000;
682 *aspace |= VME_A64;
683 }
684
685 /* Need granularity before we set the size */
686 *size = (unsigned long long)((vme_bound - *vme_base) + granularity);
687
688
689 if ((ctl & TSI148_LCSR_ITAT_2eSSTM_M) == TSI148_LCSR_ITAT_2eSSTM_160)
690 *cycle |= VME_2eSST160;
691 if ((ctl & TSI148_LCSR_ITAT_2eSSTM_M) == TSI148_LCSR_ITAT_2eSSTM_267)
692 *cycle |= VME_2eSST267;
693 if ((ctl & TSI148_LCSR_ITAT_2eSSTM_M) == TSI148_LCSR_ITAT_2eSSTM_320)
694 *cycle |= VME_2eSST320;
695
696 if (ctl & TSI148_LCSR_ITAT_BLT)
697 *cycle |= VME_BLT;
698 if (ctl & TSI148_LCSR_ITAT_MBLT)
699 *cycle |= VME_MBLT;
700 if (ctl & TSI148_LCSR_ITAT_2eVME)
701 *cycle |= VME_2eVME;
702 if (ctl & TSI148_LCSR_ITAT_2eSST)
703 *cycle |= VME_2eSST;
704 if (ctl & TSI148_LCSR_ITAT_2eSSTB)
705 *cycle |= VME_2eSSTB;
706
707 if (ctl & TSI148_LCSR_ITAT_SUPR)
708 *cycle |= VME_SUPER;
709 if (ctl & TSI148_LCSR_ITAT_NPRIV)
710 *cycle |= VME_USER;
711 if (ctl & TSI148_LCSR_ITAT_PGM)
712 *cycle |= VME_PROG;
713 if (ctl & TSI148_LCSR_ITAT_DATA)
714 *cycle |= VME_DATA;
715
716 return 0;
717 }
718
719 /*
720 * Allocate and map PCI Resource
721 */
722 static int tsi148_alloc_resource(struct vme_master_resource *image,
723 unsigned long long size)
724 {
725 unsigned long long existing_size;
726 int retval = 0;
727 struct pci_dev *pdev;
728 struct vme_bridge *tsi148_bridge;
729
730 tsi148_bridge = image->parent;
731
732 pdev = to_pci_dev(tsi148_bridge->parent);
733
734 existing_size = (unsigned long long)(image->bus_resource.end -
735 image->bus_resource.start);
736
737 /* If the existing size is OK, return */
738 if ((size != 0) && (existing_size == (size - 1)))
739 return 0;
740
741 if (existing_size != 0) {
742 iounmap(image->kern_base);
743 image->kern_base = NULL;
744 kfree(image->bus_resource.name);
745 release_resource(&image->bus_resource);
746 memset(&image->bus_resource, 0, sizeof(struct resource));
747 }
748
749 /* Exit here if size is zero */
750 if (size == 0)
751 return 0;
752
753 if (image->bus_resource.name == NULL) {
754 image->bus_resource.name = kmalloc(VMENAMSIZ+3, GFP_ATOMIC);
755 if (image->bus_resource.name == NULL) {
756 dev_err(tsi148_bridge->parent, "Unable to allocate "
757 "memory for resource name\n");
758 retval = -ENOMEM;
759 goto err_name;
760 }
761 }
762
763 sprintf((char *)image->bus_resource.name, "%s.%d", tsi148_bridge->name,
764 image->number);
765
766 image->bus_resource.start = 0;
767 image->bus_resource.end = (unsigned long)size;
768 image->bus_resource.flags = IORESOURCE_MEM;
769
770 retval = pci_bus_alloc_resource(pdev->bus,
771 &image->bus_resource, size, 0x10000, PCIBIOS_MIN_MEM,
772 0, NULL, NULL);
773 if (retval) {
774 dev_err(tsi148_bridge->parent, "Failed to allocate mem "
775 "resource for window %d size 0x%lx start 0x%lx\n",
776 image->number, (unsigned long)size,
777 (unsigned long)image->bus_resource.start);
778 goto err_resource;
779 }
780
781 image->kern_base = ioremap_nocache(
782 image->bus_resource.start, size);
783 if (image->kern_base == NULL) {
784 dev_err(tsi148_bridge->parent, "Failed to remap resource\n");
785 retval = -ENOMEM;
786 goto err_remap;
787 }
788
789 return 0;
790
791 err_remap:
792 release_resource(&image->bus_resource);
793 err_resource:
794 kfree(image->bus_resource.name);
795 memset(&image->bus_resource, 0, sizeof(struct resource));
796 err_name:
797 return retval;
798 }
799
800 /*
801 * Free and unmap PCI Resource
802 */
803 static void tsi148_free_resource(struct vme_master_resource *image)
804 {
805 iounmap(image->kern_base);
806 image->kern_base = NULL;
807 release_resource(&image->bus_resource);
808 kfree(image->bus_resource.name);
809 memset(&image->bus_resource, 0, sizeof(struct resource));
810 }
811
812 /*
813 * Set the attributes of an outbound window.
814 */
815 static int tsi148_master_set(struct vme_master_resource *image, int enabled,
816 unsigned long long vme_base, unsigned long long size, u32 aspace,
817 u32 cycle, u32 dwidth)
818 {
819 int retval = 0;
820 unsigned int i;
821 unsigned int temp_ctl = 0;
822 unsigned int pci_base_low, pci_base_high;
823 unsigned int pci_bound_low, pci_bound_high;
824 unsigned int vme_offset_low, vme_offset_high;
825 unsigned long long pci_bound, vme_offset, pci_base;
826 struct vme_bridge *tsi148_bridge;
827 struct tsi148_driver *bridge;
828 struct pci_bus_region region;
829 struct pci_dev *pdev;
830
831 tsi148_bridge = image->parent;
832
833 bridge = tsi148_bridge->driver_priv;
834
835 pdev = to_pci_dev(tsi148_bridge->parent);
836
837 /* Verify input data */
838 if (vme_base & 0xFFFF) {
839 dev_err(tsi148_bridge->parent, "Invalid VME Window "
840 "alignment\n");
841 retval = -EINVAL;
842 goto err_window;
843 }
844
845 if ((size == 0) && (enabled != 0)) {
846 dev_err(tsi148_bridge->parent, "Size must be non-zero for "
847 "enabled windows\n");
848 retval = -EINVAL;
849 goto err_window;
850 }
851
852 spin_lock(&image->lock);
853
854 /* Let's allocate the resource here rather than further up the stack as
855 * it avoids pushing loads of bus dependent stuff up the stack. If size
856 * is zero, any existing resource will be freed.
857 */
858 retval = tsi148_alloc_resource(image, size);
859 if (retval) {
860 spin_unlock(&image->lock);
861 dev_err(tsi148_bridge->parent, "Unable to allocate memory for "
862 "resource\n");
863 goto err_res;
864 }
865
866 if (size == 0) {
867 pci_base = 0;
868 pci_bound = 0;
869 vme_offset = 0;
870 } else {
871 pcibios_resource_to_bus(pdev->bus, &region,
872 &image->bus_resource);
873 pci_base = region.start;
874
875 /*
876 * Bound address is a valid address for the window, adjust
877 * according to window granularity.
878 */
879 pci_bound = pci_base + (size - 0x10000);
880 vme_offset = vme_base - pci_base;
881 }
882
883 /* Convert 64-bit variables to 2x 32-bit variables */
884 reg_split(pci_base, &pci_base_high, &pci_base_low);
885 reg_split(pci_bound, &pci_bound_high, &pci_bound_low);
886 reg_split(vme_offset, &vme_offset_high, &vme_offset_low);
887
888 if (pci_base_low & 0xFFFF) {
889 spin_unlock(&image->lock);
890 dev_err(tsi148_bridge->parent, "Invalid PCI base alignment\n");
891 retval = -EINVAL;
892 goto err_gran;
893 }
894 if (pci_bound_low & 0xFFFF) {
895 spin_unlock(&image->lock);
896 dev_err(tsi148_bridge->parent, "Invalid PCI bound alignment\n");
897 retval = -EINVAL;
898 goto err_gran;
899 }
900 if (vme_offset_low & 0xFFFF) {
901 spin_unlock(&image->lock);
902 dev_err(tsi148_bridge->parent, "Invalid VME Offset "
903 "alignment\n");
904 retval = -EINVAL;
905 goto err_gran;
906 }
907
908 i = image->number;
909
910 /* Disable while we are mucking around */
911 temp_ctl = ioread32be(bridge->base + TSI148_LCSR_OT[i] +
912 TSI148_LCSR_OFFSET_OTAT);
913 temp_ctl &= ~TSI148_LCSR_OTAT_EN;
914 iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_OT[i] +
915 TSI148_LCSR_OFFSET_OTAT);
916
917 /* Setup 2eSST speeds */
918 temp_ctl &= ~TSI148_LCSR_OTAT_2eSSTM_M;
919 switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) {
920 case VME_2eSST160:
921 temp_ctl |= TSI148_LCSR_OTAT_2eSSTM_160;
922 break;
923 case VME_2eSST267:
924 temp_ctl |= TSI148_LCSR_OTAT_2eSSTM_267;
925 break;
926 case VME_2eSST320:
927 temp_ctl |= TSI148_LCSR_OTAT_2eSSTM_320;
928 break;
929 }
930
931 /* Setup cycle types */
932 if (cycle & VME_BLT) {
933 temp_ctl &= ~TSI148_LCSR_OTAT_TM_M;
934 temp_ctl |= TSI148_LCSR_OTAT_TM_BLT;
935 }
936 if (cycle & VME_MBLT) {
937 temp_ctl &= ~TSI148_LCSR_OTAT_TM_M;
938 temp_ctl |= TSI148_LCSR_OTAT_TM_MBLT;
939 }
940 if (cycle & VME_2eVME) {
941 temp_ctl &= ~TSI148_LCSR_OTAT_TM_M;
942 temp_ctl |= TSI148_LCSR_OTAT_TM_2eVME;
943 }
944 if (cycle & VME_2eSST) {
945 temp_ctl &= ~TSI148_LCSR_OTAT_TM_M;
946 temp_ctl |= TSI148_LCSR_OTAT_TM_2eSST;
947 }
948 if (cycle & VME_2eSSTB) {
949 dev_warn(tsi148_bridge->parent, "Currently not setting "
950 "Broadcast Select Registers\n");
951 temp_ctl &= ~TSI148_LCSR_OTAT_TM_M;
952 temp_ctl |= TSI148_LCSR_OTAT_TM_2eSSTB;
953 }
954
955 /* Setup data width */
956 temp_ctl &= ~TSI148_LCSR_OTAT_DBW_M;
957 switch (dwidth) {
958 case VME_D16:
959 temp_ctl |= TSI148_LCSR_OTAT_DBW_16;
960 break;
961 case VME_D32:
962 temp_ctl |= TSI148_LCSR_OTAT_DBW_32;
963 break;
964 default:
965 spin_unlock(&image->lock);
966 dev_err(tsi148_bridge->parent, "Invalid data width\n");
967 retval = -EINVAL;
968 goto err_dwidth;
969 }
970
971 /* Setup address space */
972 temp_ctl &= ~TSI148_LCSR_OTAT_AMODE_M;
973 switch (aspace) {
974 case VME_A16:
975 temp_ctl |= TSI148_LCSR_OTAT_AMODE_A16;
976 break;
977 case VME_A24:
978 temp_ctl |= TSI148_LCSR_OTAT_AMODE_A24;
979 break;
980 case VME_A32:
981 temp_ctl |= TSI148_LCSR_OTAT_AMODE_A32;
982 break;
983 case VME_A64:
984 temp_ctl |= TSI148_LCSR_OTAT_AMODE_A64;
985 break;
986 case VME_CRCSR:
987 temp_ctl |= TSI148_LCSR_OTAT_AMODE_CRCSR;
988 break;
989 case VME_USER1:
990 temp_ctl |= TSI148_LCSR_OTAT_AMODE_USER1;
991 break;
992 case VME_USER2:
993 temp_ctl |= TSI148_LCSR_OTAT_AMODE_USER2;
994 break;
995 case VME_USER3:
996 temp_ctl |= TSI148_LCSR_OTAT_AMODE_USER3;
997 break;
998 case VME_USER4:
999 temp_ctl |= TSI148_LCSR_OTAT_AMODE_USER4;
1000 break;
1001 default:
1002 spin_unlock(&image->lock);
1003 dev_err(tsi148_bridge->parent, "Invalid address space\n");
1004 retval = -EINVAL;
1005 goto err_aspace;
1006 break;
1007 }
1008
1009 temp_ctl &= ~(3<<4);
1010 if (cycle & VME_SUPER)
1011 temp_ctl |= TSI148_LCSR_OTAT_SUP;
1012 if (cycle & VME_PROG)
1013 temp_ctl |= TSI148_LCSR_OTAT_PGM;
1014
1015 /* Setup mapping */
1016 iowrite32be(pci_base_high, bridge->base + TSI148_LCSR_OT[i] +
1017 TSI148_LCSR_OFFSET_OTSAU);
1018 iowrite32be(pci_base_low, bridge->base + TSI148_LCSR_OT[i] +
1019 TSI148_LCSR_OFFSET_OTSAL);
1020 iowrite32be(pci_bound_high, bridge->base + TSI148_LCSR_OT[i] +
1021 TSI148_LCSR_OFFSET_OTEAU);
1022 iowrite32be(pci_bound_low, bridge->base + TSI148_LCSR_OT[i] +
1023 TSI148_LCSR_OFFSET_OTEAL);
1024 iowrite32be(vme_offset_high, bridge->base + TSI148_LCSR_OT[i] +
1025 TSI148_LCSR_OFFSET_OTOFU);
1026 iowrite32be(vme_offset_low, bridge->base + TSI148_LCSR_OT[i] +
1027 TSI148_LCSR_OFFSET_OTOFL);
1028
1029 /* Write ctl reg without enable */
1030 iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_OT[i] +
1031 TSI148_LCSR_OFFSET_OTAT);
1032
1033 if (enabled)
1034 temp_ctl |= TSI148_LCSR_OTAT_EN;
1035
1036 iowrite32be(temp_ctl, bridge->base + TSI148_LCSR_OT[i] +
1037 TSI148_LCSR_OFFSET_OTAT);
1038
1039 spin_unlock(&image->lock);
1040 return 0;
1041
1042 err_aspace:
1043 err_dwidth:
1044 err_gran:
1045 tsi148_free_resource(image);
1046 err_res:
1047 err_window:
1048 return retval;
1049
1050 }
1051
1052 /*
1053 * Set the attributes of an outbound window.
1054 *
1055 * XXX Not parsing prefetch information.
1056 */
1057 static int __tsi148_master_get(struct vme_master_resource *image, int *enabled,
1058 unsigned long long *vme_base, unsigned long long *size, u32 *aspace,
1059 u32 *cycle, u32 *dwidth)
1060 {
1061 unsigned int i, ctl;
1062 unsigned int pci_base_low, pci_base_high;
1063 unsigned int pci_bound_low, pci_bound_high;
1064 unsigned int vme_offset_low, vme_offset_high;
1065
1066 unsigned long long pci_base, pci_bound, vme_offset;
1067 struct tsi148_driver *bridge;
1068
1069 bridge = image->parent->driver_priv;
1070
1071 i = image->number;
1072
1073 ctl = ioread32be(bridge->base + TSI148_LCSR_OT[i] +
1074 TSI148_LCSR_OFFSET_OTAT);
1075
1076 pci_base_high = ioread32be(bridge->base + TSI148_LCSR_OT[i] +
1077 TSI148_LCSR_OFFSET_OTSAU);
1078 pci_base_low = ioread32be(bridge->base + TSI148_LCSR_OT[i] +
1079 TSI148_LCSR_OFFSET_OTSAL);
1080 pci_bound_high = ioread32be(bridge->base + TSI148_LCSR_OT[i] +
1081 TSI148_LCSR_OFFSET_OTEAU);
1082 pci_bound_low = ioread32be(bridge->base + TSI148_LCSR_OT[i] +
1083 TSI148_LCSR_OFFSET_OTEAL);
1084 vme_offset_high = ioread32be(bridge->base + TSI148_LCSR_OT[i] +
1085 TSI148_LCSR_OFFSET_OTOFU);
1086 vme_offset_low = ioread32be(bridge->base + TSI148_LCSR_OT[i] +
1087 TSI148_LCSR_OFFSET_OTOFL);
1088
1089 /* Convert 64-bit variables to 2x 32-bit variables */
1090 reg_join(pci_base_high, pci_base_low, &pci_base);
1091 reg_join(pci_bound_high, pci_bound_low, &pci_bound);
1092 reg_join(vme_offset_high, vme_offset_low, &vme_offset);
1093
1094 *vme_base = pci_base + vme_offset;
1095 *size = (unsigned long long)(pci_bound - pci_base) + 0x10000;
1096
1097 *enabled = 0;
1098 *aspace = 0;
1099 *cycle = 0;
1100 *dwidth = 0;
1101
1102 if (ctl & TSI148_LCSR_OTAT_EN)
1103 *enabled = 1;
1104
1105 /* Setup address space */
1106 if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_A16)
1107 *aspace |= VME_A16;
1108 if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_A24)
1109 *aspace |= VME_A24;
1110 if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_A32)
1111 *aspace |= VME_A32;
1112 if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_A64)
1113 *aspace |= VME_A64;
1114 if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_CRCSR)
1115 *aspace |= VME_CRCSR;
1116 if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_USER1)
1117 *aspace |= VME_USER1;
1118 if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_USER2)
1119 *aspace |= VME_USER2;
1120 if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_USER3)
1121 *aspace |= VME_USER3;
1122 if ((ctl & TSI148_LCSR_OTAT_AMODE_M) == TSI148_LCSR_OTAT_AMODE_USER4)
1123 *aspace |= VME_USER4;
1124
1125 /* Setup 2eSST speeds */
1126 if ((ctl & TSI148_LCSR_OTAT_2eSSTM_M) == TSI148_LCSR_OTAT_2eSSTM_160)
1127 *cycle |= VME_2eSST160;
1128 if ((ctl & TSI148_LCSR_OTAT_2eSSTM_M) == TSI148_LCSR_OTAT_2eSSTM_267)
1129 *cycle |= VME_2eSST267;
1130 if ((ctl & TSI148_LCSR_OTAT_2eSSTM_M) == TSI148_LCSR_OTAT_2eSSTM_320)
1131 *cycle |= VME_2eSST320;
1132
1133 /* Setup cycle types */
1134 if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_SCT)
1135 *cycle |= VME_SCT;
1136 if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_BLT)
1137 *cycle |= VME_BLT;
1138 if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_MBLT)
1139 *cycle |= VME_MBLT;
1140 if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_2eVME)
1141 *cycle |= VME_2eVME;
1142 if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_2eSST)
1143 *cycle |= VME_2eSST;
1144 if ((ctl & TSI148_LCSR_OTAT_TM_M) == TSI148_LCSR_OTAT_TM_2eSSTB)
1145 *cycle |= VME_2eSSTB;
1146
1147 if (ctl & TSI148_LCSR_OTAT_SUP)
1148 *cycle |= VME_SUPER;
1149 else
1150 *cycle |= VME_USER;
1151
1152 if (ctl & TSI148_LCSR_OTAT_PGM)
1153 *cycle |= VME_PROG;
1154 else
1155 *cycle |= VME_DATA;
1156
1157 /* Setup data width */
1158 if ((ctl & TSI148_LCSR_OTAT_DBW_M) == TSI148_LCSR_OTAT_DBW_16)
1159 *dwidth = VME_D16;
1160 if ((ctl & TSI148_LCSR_OTAT_DBW_M) == TSI148_LCSR_OTAT_DBW_32)
1161 *dwidth = VME_D32;
1162
1163 return 0;
1164 }
1165
1166
1167 static int tsi148_master_get(struct vme_master_resource *image, int *enabled,
1168 unsigned long long *vme_base, unsigned long long *size, u32 *aspace,
1169 u32 *cycle, u32 *dwidth)
1170 {
1171 int retval;
1172
1173 spin_lock(&image->lock);
1174
1175 retval = __tsi148_master_get(image, enabled, vme_base, size, aspace,
1176 cycle, dwidth);
1177
1178 spin_unlock(&image->lock);
1179
1180 return retval;
1181 }
1182
1183 static ssize_t tsi148_master_read(struct vme_master_resource *image, void *buf,
1184 size_t count, loff_t offset)
1185 {
1186 int retval, enabled;
1187 unsigned long long vme_base, size;
1188 u32 aspace, cycle, dwidth;
1189 struct vme_error_handler *handler = NULL;
1190 struct vme_bridge *tsi148_bridge;
1191 void __iomem *addr = image->kern_base + offset;
1192 unsigned int done = 0;
1193 unsigned int count32;
1194
1195 tsi148_bridge = image->parent;
1196
1197 spin_lock(&image->lock);
1198
1199 if (err_chk) {
1200 __tsi148_master_get(image, &enabled, &vme_base, &size, &aspace,
1201 &cycle, &dwidth);
1202 handler = vme_register_error_handler(tsi148_bridge, aspace,
1203 vme_base + offset, count);
1204 if (!handler) {
1205 spin_unlock(&image->lock);
1206 return -ENOMEM;
1207 }
1208 }
1209
1210 /* The following code handles VME address alignment. We cannot use
1211 * memcpy_xxx here because it may cut data transfers in to 8-bit
1212 * cycles when D16 or D32 cycles are required on the VME bus.
1213 * On the other hand, the bridge itself assures that the maximum data
1214 * cycle configured for the transfer is used and splits it
1215 * automatically for non-aligned addresses, so we don't want the
1216 * overhead of needlessly forcing small transfers for the entire cycle.
1217 */
1218 if ((uintptr_t)addr & 0x1) {
1219 *(u8 *)buf = ioread8(addr);
1220 done += 1;
1221 if (done == count)
1222 goto out;
1223 }
1224 if ((uintptr_t)(addr + done) & 0x2) {
1225 if ((count - done) < 2) {
1226 *(u8 *)(buf + done) = ioread8(addr + done);
1227 done += 1;
1228 goto out;
1229 } else {
1230 *(u16 *)(buf + done) = ioread16(addr + done);
1231 done += 2;
1232 }
1233 }
1234
1235 count32 = (count - done) & ~0x3;
1236 while (done < count32) {
1237 *(u32 *)(buf + done) = ioread32(addr + done);
1238 done += 4;
1239 }
1240
1241 if ((count - done) & 0x2) {
1242 *(u16 *)(buf + done) = ioread16(addr + done);
1243 done += 2;
1244 }
1245 if ((count - done) & 0x1) {
1246 *(u8 *)(buf + done) = ioread8(addr + done);
1247 done += 1;
1248 }
1249
1250 out:
1251 retval = count;
1252
1253 if (err_chk) {
1254 if (handler->num_errors) {
1255 dev_err(image->parent->parent,
1256 "First VME read error detected an at address 0x%llx\n",
1257 handler->first_error);
1258 retval = handler->first_error - (vme_base + offset);
1259 }
1260 vme_unregister_error_handler(handler);
1261 }
1262
1263 spin_unlock(&image->lock);
1264
1265 return retval;
1266 }
1267
1268
1269 static ssize_t tsi148_master_write(struct vme_master_resource *image, void *buf,
1270 size_t count, loff_t offset)
1271 {
1272 int retval = 0, enabled;
1273 unsigned long long vme_base, size;
1274 u32 aspace, cycle, dwidth;
1275 void __iomem *addr = image->kern_base + offset;
1276 unsigned int done = 0;
1277 unsigned int count32;
1278
1279 struct vme_error_handler *handler = NULL;
1280 struct vme_bridge *tsi148_bridge;
1281 struct tsi148_driver *bridge;
1282
1283 tsi148_bridge = image->parent;
1284
1285 bridge = tsi148_bridge->driver_priv;
1286
1287 spin_lock(&image->lock);
1288
1289 if (err_chk) {
1290 __tsi148_master_get(image, &enabled, &vme_base, &size, &aspace,
1291 &cycle, &dwidth);
1292 handler = vme_register_error_handler(tsi148_bridge, aspace,
1293 vme_base + offset, count);
1294 if (!handler) {
1295 spin_unlock(&image->lock);
1296 return -ENOMEM;
1297 }
1298 }
1299
1300 /* Here we apply for the same strategy we do in master_read
1301 * function in order to assure the correct cycles.
1302 */
1303 if ((uintptr_t)addr & 0x1) {
1304 iowrite8(*(u8 *)buf, addr);
1305 done += 1;
1306 if (done == count)
1307 goto out;
1308 }
1309 if ((uintptr_t)(addr + done) & 0x2) {
1310 if ((count - done) < 2) {
1311 iowrite8(*(u8 *)(buf + done), addr + done);
1312 done += 1;
1313 goto out;
1314 } else {
1315 iowrite16(*(u16 *)(buf + done), addr + done);
1316 done += 2;
1317 }
1318 }
1319
1320 count32 = (count - done) & ~0x3;
1321 while (done < count32) {
1322 iowrite32(*(u32 *)(buf + done), addr + done);
1323 done += 4;
1324 }
1325
1326 if ((count - done) & 0x2) {
1327 iowrite16(*(u16 *)(buf + done), addr + done);
1328 done += 2;
1329 }
1330 if ((count - done) & 0x1) {
1331 iowrite8(*(u8 *)(buf + done), addr + done);
1332 done += 1;
1333 }
1334
1335 out:
1336 retval = count;
1337
1338 /*
1339 * Writes are posted. We need to do a read on the VME bus to flush out
1340 * all of the writes before we check for errors. We can't guarantee
1341 * that reading the data we have just written is safe. It is believed
1342 * that there isn't any read, write re-ordering, so we can read any
1343 * location in VME space, so lets read the Device ID from the tsi148's
1344 * own registers as mapped into CR/CSR space.
1345 *
1346 * We check for saved errors in the written address range/space.
1347 */
1348
1349 if (err_chk) {
1350 ioread16(bridge->flush_image->kern_base + 0x7F000);
1351
1352 if (handler->num_errors) {
1353 dev_warn(tsi148_bridge->parent,
1354 "First VME write error detected an at address 0x%llx\n",
1355 handler->first_error);
1356 retval = handler->first_error - (vme_base + offset);
1357 }
1358 vme_unregister_error_handler(handler);
1359 }
1360
1361 spin_unlock(&image->lock);
1362
1363 return retval;
1364 }
1365
1366 /*
1367 * Perform an RMW cycle on the VME bus.
1368 *
1369 * Requires a previously configured master window, returns final value.
1370 */
1371 static unsigned int tsi148_master_rmw(struct vme_master_resource *image,
1372 unsigned int mask, unsigned int compare, unsigned int swap,
1373 loff_t offset)
1374 {
1375 unsigned long long pci_addr;
1376 unsigned int pci_addr_high, pci_addr_low;
1377 u32 tmp, result;
1378 int i;
1379 struct tsi148_driver *bridge;
1380
1381 bridge = image->parent->driver_priv;
1382
1383 /* Find the PCI address that maps to the desired VME address */
1384 i = image->number;
1385
1386 /* Locking as we can only do one of these at a time */
1387 mutex_lock(&bridge->vme_rmw);
1388
1389 /* Lock image */
1390 spin_lock(&image->lock);
1391
1392 pci_addr_high = ioread32be(bridge->base + TSI148_LCSR_OT[i] +
1393 TSI148_LCSR_OFFSET_OTSAU);
1394 pci_addr_low = ioread32be(bridge->base + TSI148_LCSR_OT[i] +
1395 TSI148_LCSR_OFFSET_OTSAL);
1396
1397 reg_join(pci_addr_high, pci_addr_low, &pci_addr);
1398 reg_split(pci_addr + offset, &pci_addr_high, &pci_addr_low);
1399
1400 /* Configure registers */
1401 iowrite32be(mask, bridge->base + TSI148_LCSR_RMWEN);
1402 iowrite32be(compare, bridge->base + TSI148_LCSR_RMWC);
1403 iowrite32be(swap, bridge->base + TSI148_LCSR_RMWS);
1404 iowrite32be(pci_addr_high, bridge->base + TSI148_LCSR_RMWAU);
1405 iowrite32be(pci_addr_low, bridge->base + TSI148_LCSR_RMWAL);
1406
1407 /* Enable RMW */
1408 tmp = ioread32be(bridge->base + TSI148_LCSR_VMCTRL);
1409 tmp |= TSI148_LCSR_VMCTRL_RMWEN;
1410 iowrite32be(tmp, bridge->base + TSI148_LCSR_VMCTRL);
1411
1412 /* Kick process off with a read to the required address. */
1413 result = ioread32be(image->kern_base + offset);
1414
1415 /* Disable RMW */
1416 tmp = ioread32be(bridge->base + TSI148_LCSR_VMCTRL);
1417 tmp &= ~TSI148_LCSR_VMCTRL_RMWEN;
1418 iowrite32be(tmp, bridge->base + TSI148_LCSR_VMCTRL);
1419
1420 spin_unlock(&image->lock);
1421
1422 mutex_unlock(&bridge->vme_rmw);
1423
1424 return result;
1425 }
1426
1427 static int tsi148_dma_set_vme_src_attributes(struct device *dev, __be32 *attr,
1428 u32 aspace, u32 cycle, u32 dwidth)
1429 {
1430 u32 val;
1431
1432 val = be32_to_cpu(*attr);
1433
1434 /* Setup 2eSST speeds */
1435 switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) {
1436 case VME_2eSST160:
1437 val |= TSI148_LCSR_DSAT_2eSSTM_160;
1438 break;
1439 case VME_2eSST267:
1440 val |= TSI148_LCSR_DSAT_2eSSTM_267;
1441 break;
1442 case VME_2eSST320:
1443 val |= TSI148_LCSR_DSAT_2eSSTM_320;
1444 break;
1445 }
1446
1447 /* Setup cycle types */
1448 if (cycle & VME_SCT)
1449 val |= TSI148_LCSR_DSAT_TM_SCT;
1450
1451 if (cycle & VME_BLT)
1452 val |= TSI148_LCSR_DSAT_TM_BLT;
1453
1454 if (cycle & VME_MBLT)
1455 val |= TSI148_LCSR_DSAT_TM_MBLT;
1456
1457 if (cycle & VME_2eVME)
1458 val |= TSI148_LCSR_DSAT_TM_2eVME;
1459
1460 if (cycle & VME_2eSST)
1461 val |= TSI148_LCSR_DSAT_TM_2eSST;
1462
1463 if (cycle & VME_2eSSTB) {
1464 dev_err(dev, "Currently not setting Broadcast Select "
1465 "Registers\n");
1466 val |= TSI148_LCSR_DSAT_TM_2eSSTB;
1467 }
1468
1469 /* Setup data width */
1470 switch (dwidth) {
1471 case VME_D16:
1472 val |= TSI148_LCSR_DSAT_DBW_16;
1473 break;
1474 case VME_D32:
1475 val |= TSI148_LCSR_DSAT_DBW_32;
1476 break;
1477 default:
1478 dev_err(dev, "Invalid data width\n");
1479 return -EINVAL;
1480 }
1481
1482 /* Setup address space */
1483 switch (aspace) {
1484 case VME_A16:
1485 val |= TSI148_LCSR_DSAT_AMODE_A16;
1486 break;
1487 case VME_A24:
1488 val |= TSI148_LCSR_DSAT_AMODE_A24;
1489 break;
1490 case VME_A32:
1491 val |= TSI148_LCSR_DSAT_AMODE_A32;
1492 break;
1493 case VME_A64:
1494 val |= TSI148_LCSR_DSAT_AMODE_A64;
1495 break;
1496 case VME_CRCSR:
1497 val |= TSI148_LCSR_DSAT_AMODE_CRCSR;
1498 break;
1499 case VME_USER1:
1500 val |= TSI148_LCSR_DSAT_AMODE_USER1;
1501 break;
1502 case VME_USER2:
1503 val |= TSI148_LCSR_DSAT_AMODE_USER2;
1504 break;
1505 case VME_USER3:
1506 val |= TSI148_LCSR_DSAT_AMODE_USER3;
1507 break;
1508 case VME_USER4:
1509 val |= TSI148_LCSR_DSAT_AMODE_USER4;
1510 break;
1511 default:
1512 dev_err(dev, "Invalid address space\n");
1513 return -EINVAL;
1514 break;
1515 }
1516
1517 if (cycle & VME_SUPER)
1518 val |= TSI148_LCSR_DSAT_SUP;
1519 if (cycle & VME_PROG)
1520 val |= TSI148_LCSR_DSAT_PGM;
1521
1522 *attr = cpu_to_be32(val);
1523
1524 return 0;
1525 }
1526
1527 static int tsi148_dma_set_vme_dest_attributes(struct device *dev, __be32 *attr,
1528 u32 aspace, u32 cycle, u32 dwidth)
1529 {
1530 u32 val;
1531
1532 val = be32_to_cpu(*attr);
1533
1534 /* Setup 2eSST speeds */
1535 switch (cycle & (VME_2eSST160 | VME_2eSST267 | VME_2eSST320)) {
1536 case VME_2eSST160:
1537 val |= TSI148_LCSR_DDAT_2eSSTM_160;
1538 break;
1539 case VME_2eSST267:
1540 val |= TSI148_LCSR_DDAT_2eSSTM_267;
1541 break;
1542 case VME_2eSST320:
1543 val |= TSI148_LCSR_DDAT_2eSSTM_320;
1544 break;
1545 }
1546
1547 /* Setup cycle types */
1548 if (cycle & VME_SCT)
1549 val |= TSI148_LCSR_DDAT_TM_SCT;
1550
1551 if (cycle & VME_BLT)
1552 val |= TSI148_LCSR_DDAT_TM_BLT;
1553
1554 if (cycle & VME_MBLT)
1555 val |= TSI148_LCSR_DDAT_TM_MBLT;
1556
1557 if (cycle & VME_2eVME)
1558 val |= TSI148_LCSR_DDAT_TM_2eVME;
1559
1560 if (cycle & VME_2eSST)
1561 val |= TSI148_LCSR_DDAT_TM_2eSST;
1562
1563 if (cycle & VME_2eSSTB) {
1564 dev_err(dev, "Currently not setting Broadcast Select "
1565 "Registers\n");
1566 val |= TSI148_LCSR_DDAT_TM_2eSSTB;
1567 }
1568
1569 /* Setup data width */
1570 switch (dwidth) {
1571 case VME_D16:
1572 val |= TSI148_LCSR_DDAT_DBW_16;
1573 break;
1574 case VME_D32:
1575 val |= TSI148_LCSR_DDAT_DBW_32;
1576 break;
1577 default:
1578 dev_err(dev, "Invalid data width\n");
1579 return -EINVAL;
1580 }
1581
1582 /* Setup address space */
1583 switch (aspace) {
1584 case VME_A16:
1585 val |= TSI148_LCSR_DDAT_AMODE_A16;
1586 break;
1587 case VME_A24:
1588 val |= TSI148_LCSR_DDAT_AMODE_A24;
1589 break;
1590 case VME_A32:
1591 val |= TSI148_LCSR_DDAT_AMODE_A32;
1592 break;
1593 case VME_A64:
1594 val |= TSI148_LCSR_DDAT_AMODE_A64;
1595 break;
1596 case VME_CRCSR:
1597 val |= TSI148_LCSR_DDAT_AMODE_CRCSR;
1598 break;
1599 case VME_USER1:
1600 val |= TSI148_LCSR_DDAT_AMODE_USER1;
1601 break;
1602 case VME_USER2:
1603 val |= TSI148_LCSR_DDAT_AMODE_USER2;
1604 break;
1605 case VME_USER3:
1606 val |= TSI148_LCSR_DDAT_AMODE_USER3;
1607 break;
1608 case VME_USER4:
1609 val |= TSI148_LCSR_DDAT_AMODE_USER4;
1610 break;
1611 default:
1612 dev_err(dev, "Invalid address space\n");
1613 return -EINVAL;
1614 break;
1615 }
1616
1617 if (cycle & VME_SUPER)
1618 val |= TSI148_LCSR_DDAT_SUP;
1619 if (cycle & VME_PROG)
1620 val |= TSI148_LCSR_DDAT_PGM;
1621
1622 *attr = cpu_to_be32(val);
1623
1624 return 0;
1625 }
1626
1627 /*
1628 * Add a link list descriptor to the list
1629 *
1630 * Note: DMA engine expects the DMA descriptor to be big endian.
1631 */
1632 static int tsi148_dma_list_add(struct vme_dma_list *list,
1633 struct vme_dma_attr *src, struct vme_dma_attr *dest, size_t count)
1634 {
1635 struct tsi148_dma_entry *entry, *prev;
1636 u32 address_high, address_low, val;
1637 struct vme_dma_pattern *pattern_attr;
1638 struct vme_dma_pci *pci_attr;
1639 struct vme_dma_vme *vme_attr;
1640 int retval = 0;
1641 struct vme_bridge *tsi148_bridge;
1642
1643 tsi148_bridge = list->parent->parent;
1644
1645 /* Descriptor must be aligned on 64-bit boundaries */
1646 entry = kmalloc(sizeof(struct tsi148_dma_entry), GFP_KERNEL);
1647 if (entry == NULL) {
1648 dev_err(tsi148_bridge->parent, "Failed to allocate memory for "
1649 "dma resource structure\n");
1650 retval = -ENOMEM;
1651 goto err_mem;
1652 }
1653
1654 /* Test descriptor alignment */
1655 if ((unsigned long)&entry->descriptor & 0x7) {
1656 dev_err(tsi148_bridge->parent, "Descriptor not aligned to 8 "
1657 "byte boundary as required: %p\n",
1658 &entry->descriptor);
1659 retval = -EINVAL;
1660 goto err_align;
1661 }
1662
1663 /* Given we are going to fill out the structure, we probably don't
1664 * need to zero it, but better safe than sorry for now.
1665 */
1666 memset(&entry->descriptor, 0, sizeof(struct tsi148_dma_descriptor));
1667
1668 /* Fill out source part */
1669 switch (src->type) {
1670 case VME_DMA_PATTERN:
1671 pattern_attr = src->private;
1672
1673 entry->descriptor.dsal = cpu_to_be32(pattern_attr->pattern);
1674
1675 val = TSI148_LCSR_DSAT_TYP_PAT;
1676
1677 /* Default behaviour is 32 bit pattern */
1678 if (pattern_attr->type & VME_DMA_PATTERN_BYTE)
1679 val |= TSI148_LCSR_DSAT_PSZ;
1680
1681 /* It seems that the default behaviour is to increment */
1682 if ((pattern_attr->type & VME_DMA_PATTERN_INCREMENT) == 0)
1683 val |= TSI148_LCSR_DSAT_NIN;
1684 entry->descriptor.dsat = cpu_to_be32(val);
1685 break;
1686 case VME_DMA_PCI:
1687 pci_attr = src->private;
1688
1689 reg_split((unsigned long long)pci_attr->address, &address_high,
1690 &address_low);
1691 entry->descriptor.dsau = cpu_to_be32(address_high);
1692 entry->descriptor.dsal = cpu_to_be32(address_low);
1693 entry->descriptor.dsat = cpu_to_be32(TSI148_LCSR_DSAT_TYP_PCI);
1694 break;
1695 case VME_DMA_VME:
1696 vme_attr = src->private;
1697
1698 reg_split((unsigned long long)vme_attr->address, &address_high,
1699 &address_low);
1700 entry->descriptor.dsau = cpu_to_be32(address_high);
1701 entry->descriptor.dsal = cpu_to_be32(address_low);
1702 entry->descriptor.dsat = cpu_to_be32(TSI148_LCSR_DSAT_TYP_VME);
1703
1704 retval = tsi148_dma_set_vme_src_attributes(
1705 tsi148_bridge->parent, &entry->descriptor.dsat,
1706 vme_attr->aspace, vme_attr->cycle, vme_attr->dwidth);
1707 if (retval < 0)
1708 goto err_source;
1709 break;
1710 default:
1711 dev_err(tsi148_bridge->parent, "Invalid source type\n");
1712 retval = -EINVAL;
1713 goto err_source;
1714 break;
1715 }
1716
1717 /* Assume last link - this will be over-written by adding another */
1718 entry->descriptor.dnlau = cpu_to_be32(0);
1719 entry->descriptor.dnlal = cpu_to_be32(TSI148_LCSR_DNLAL_LLA);
1720
1721 /* Fill out destination part */
1722 switch (dest->type) {
1723 case VME_DMA_PCI:
1724 pci_attr = dest->private;
1725
1726 reg_split((unsigned long long)pci_attr->address, &address_high,
1727 &address_low);
1728 entry->descriptor.ddau = cpu_to_be32(address_high);
1729 entry->descriptor.ddal = cpu_to_be32(address_low);
1730 entry->descriptor.ddat = cpu_to_be32(TSI148_LCSR_DDAT_TYP_PCI);
1731 break;
1732 case VME_DMA_VME:
1733 vme_attr = dest->private;
1734
1735 reg_split((unsigned long long)vme_attr->address, &address_high,
1736 &address_low);
1737 entry->descriptor.ddau = cpu_to_be32(address_high);
1738 entry->descriptor.ddal = cpu_to_be32(address_low);
1739 entry->descriptor.ddat = cpu_to_be32(TSI148_LCSR_DDAT_TYP_VME);
1740
1741 retval = tsi148_dma_set_vme_dest_attributes(
1742 tsi148_bridge->parent, &entry->descriptor.ddat,
1743 vme_attr->aspace, vme_attr->cycle, vme_attr->dwidth);
1744 if (retval < 0)
1745 goto err_dest;
1746 break;
1747 default:
1748 dev_err(tsi148_bridge->parent, "Invalid destination type\n");
1749 retval = -EINVAL;
1750 goto err_dest;
1751 break;
1752 }
1753
1754 /* Fill out count */
1755 entry->descriptor.dcnt = cpu_to_be32((u32)count);
1756
1757 /* Add to list */
1758 list_add_tail(&entry->list, &list->entries);
1759
1760 entry->dma_handle = dma_map_single(tsi148_bridge->parent,
1761 &entry->descriptor,
1762 sizeof(struct tsi148_dma_descriptor), DMA_TO_DEVICE);
1763 if (dma_mapping_error(tsi148_bridge->parent, entry->dma_handle)) {
1764 dev_err(tsi148_bridge->parent, "DMA mapping error\n");
1765 retval = -EINVAL;
1766 goto err_dma;
1767 }
1768
1769 /* Fill out previous descriptors "Next Address" */
1770 if (entry->list.prev != &list->entries) {
1771 reg_split((unsigned long long)entry->dma_handle, &address_high,
1772 &address_low);
1773 prev = list_entry(entry->list.prev, struct tsi148_dma_entry,
1774 list);
1775 prev->descriptor.dnlau = cpu_to_be32(address_high);
1776 prev->descriptor.dnlal = cpu_to_be32(address_low);
1777
1778 }
1779
1780 return 0;
1781
1782 err_dma:
1783 err_dest:
1784 err_source:
1785 err_align:
1786 kfree(entry);
1787 err_mem:
1788 return retval;
1789 }
1790
1791 /*
1792 * Check to see if the provided DMA channel is busy.
1793 */
1794 static int tsi148_dma_busy(struct vme_bridge *tsi148_bridge, int channel)
1795 {
1796 u32 tmp;
1797 struct tsi148_driver *bridge;
1798
1799 bridge = tsi148_bridge->driver_priv;
1800
1801 tmp = ioread32be(bridge->base + TSI148_LCSR_DMA[channel] +
1802 TSI148_LCSR_OFFSET_DSTA);
1803
1804 if (tmp & TSI148_LCSR_DSTA_BSY)
1805 return 0;
1806 else
1807 return 1;
1808
1809 }
1810
1811 /*
1812 * Execute a previously generated link list
1813 *
1814 * XXX Need to provide control register configuration.
1815 */
1816 static int tsi148_dma_list_exec(struct vme_dma_list *list)
1817 {
1818 struct vme_dma_resource *ctrlr;
1819 int channel, retval;
1820 struct tsi148_dma_entry *entry;
1821 u32 bus_addr_high, bus_addr_low;
1822 u32 val, dctlreg = 0;
1823 struct vme_bridge *tsi148_bridge;
1824 struct tsi148_driver *bridge;
1825
1826 ctrlr = list->parent;
1827
1828 tsi148_bridge = ctrlr->parent;
1829
1830 bridge = tsi148_bridge->driver_priv;
1831
1832 mutex_lock(&ctrlr->mtx);
1833
1834 channel = ctrlr->number;
1835
1836 if (!list_empty(&ctrlr->running)) {
1837 /*
1838 * XXX We have an active DMA transfer and currently haven't
1839 * sorted out the mechanism for "pending" DMA transfers.
1840 * Return busy.
1841 */
1842 /* Need to add to pending here */
1843 mutex_unlock(&ctrlr->mtx);
1844 return -EBUSY;
1845 } else {
1846 list_add(&list->list, &ctrlr->running);
1847 }
1848
1849 /* Get first bus address and write into registers */
1850 entry = list_first_entry(&list->entries, struct tsi148_dma_entry,
1851 list);
1852
1853 mutex_unlock(&ctrlr->mtx);
1854
1855 reg_split(entry->dma_handle, &bus_addr_high, &bus_addr_low);
1856
1857 iowrite32be(bus_addr_high, bridge->base +
1858 TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DNLAU);
1859 iowrite32be(bus_addr_low, bridge->base +
1860 TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DNLAL);
1861
1862 dctlreg = ioread32be(bridge->base + TSI148_LCSR_DMA[channel] +
1863 TSI148_LCSR_OFFSET_DCTL);
1864
1865 /* Start the operation */
1866 iowrite32be(dctlreg | TSI148_LCSR_DCTL_DGO, bridge->base +
1867 TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DCTL);
1868
1869 retval = wait_event_interruptible(bridge->dma_queue[channel],
1870 tsi148_dma_busy(ctrlr->parent, channel));
1871
1872 if (retval) {
1873 iowrite32be(dctlreg | TSI148_LCSR_DCTL_ABT, bridge->base +
1874 TSI148_LCSR_DMA[channel] + TSI148_LCSR_OFFSET_DCTL);
1875 /* Wait for the operation to abort */
1876 wait_event(bridge->dma_queue[channel],
1877 tsi148_dma_busy(ctrlr->parent, channel));
1878 retval = -EINTR;
1879 goto exit;
1880 }
1881
1882 /*
1883 * Read status register, this register is valid until we kick off a
1884 * new transfer.
1885 */
1886 val = ioread32be(bridge->base + TSI148_LCSR_DMA[channel] +
1887 TSI148_LCSR_OFFSET_DSTA);
1888
1889 if (val & TSI148_LCSR_DSTA_VBE) {
1890 dev_err(tsi148_bridge->parent, "DMA Error. DSTA=%08X\n", val);
1891 retval = -EIO;
1892 }
1893
1894 exit:
1895 /* Remove list from running list */
1896 mutex_lock(&ctrlr->mtx);
1897 list_del(&list->list);
1898 mutex_unlock(&ctrlr->mtx);
1899
1900 return retval;
1901 }
1902
1903 /*
1904 * Clean up a previously generated link list
1905 *
1906 * We have a separate function, don't assume that the chain can't be reused.
1907 */
1908 static int tsi148_dma_list_empty(struct vme_dma_list *list)
1909 {
1910 struct list_head *pos, *temp;
1911 struct tsi148_dma_entry *entry;
1912
1913 struct vme_bridge *tsi148_bridge = list->parent->parent;
1914
1915 /* detach and free each entry */
1916 list_for_each_safe(pos, temp, &list->entries) {
1917 list_del(pos);
1918 entry = list_entry(pos, struct tsi148_dma_entry, list);
1919
1920 dma_unmap_single(tsi148_bridge->parent, entry->dma_handle,
1921 sizeof(struct tsi148_dma_descriptor), DMA_TO_DEVICE);
1922 kfree(entry);
1923 }
1924
1925 return 0;
1926 }
1927
1928 /*
1929 * All 4 location monitors reside at the same base - this is therefore a
1930 * system wide configuration.
1931 *
1932 * This does not enable the LM monitor - that should be done when the first
1933 * callback is attached and disabled when the last callback is removed.
1934 */
1935 static int tsi148_lm_set(struct vme_lm_resource *lm, unsigned long long lm_base,
1936 u32 aspace, u32 cycle)
1937 {
1938 u32 lm_base_high, lm_base_low, lm_ctl = 0;
1939 int i;
1940 struct vme_bridge *tsi148_bridge;
1941 struct tsi148_driver *bridge;
1942
1943 tsi148_bridge = lm->parent;
1944
1945 bridge = tsi148_bridge->driver_priv;
1946
1947 mutex_lock(&lm->mtx);
1948
1949 /* If we already have a callback attached, we can't move it! */
1950 for (i = 0; i < lm->monitors; i++) {
1951 if (bridge->lm_callback[i] != NULL) {
1952 mutex_unlock(&lm->mtx);
1953 dev_err(tsi148_bridge->parent, "Location monitor "
1954 "callback attached, can't reset\n");
1955 return -EBUSY;
1956 }
1957 }
1958
1959 switch (aspace) {
1960 case VME_A16:
1961 lm_ctl |= TSI148_LCSR_LMAT_AS_A16;
1962 break;
1963 case VME_A24:
1964 lm_ctl |= TSI148_LCSR_LMAT_AS_A24;
1965 break;
1966 case VME_A32:
1967 lm_ctl |= TSI148_LCSR_LMAT_AS_A32;
1968 break;
1969 case VME_A64:
1970 lm_ctl |= TSI148_LCSR_LMAT_AS_A64;
1971 break;
1972 default:
1973 mutex_unlock(&lm->mtx);
1974 dev_err(tsi148_bridge->parent, "Invalid address space\n");
1975 return -EINVAL;
1976 break;
1977 }
1978
1979 if (cycle & VME_SUPER)
1980 lm_ctl |= TSI148_LCSR_LMAT_SUPR ;
1981 if (cycle & VME_USER)
1982 lm_ctl |= TSI148_LCSR_LMAT_NPRIV;
1983 if (cycle & VME_PROG)
1984 lm_ctl |= TSI148_LCSR_LMAT_PGM;
1985 if (cycle & VME_DATA)
1986 lm_ctl |= TSI148_LCSR_LMAT_DATA;
1987
1988 reg_split(lm_base, &lm_base_high, &lm_base_low);
1989
1990 iowrite32be(lm_base_high, bridge->base + TSI148_LCSR_LMBAU);
1991 iowrite32be(lm_base_low, bridge->base + TSI148_LCSR_LMBAL);
1992 iowrite32be(lm_ctl, bridge->base + TSI148_LCSR_LMAT);
1993
1994 mutex_unlock(&lm->mtx);
1995
1996 return 0;
1997 }
1998
1999 /* Get configuration of the callback monitor and return whether it is enabled
2000 * or disabled.
2001 */
2002 static int tsi148_lm_get(struct vme_lm_resource *lm,
2003 unsigned long long *lm_base, u32 *aspace, u32 *cycle)
2004 {
2005 u32 lm_base_high, lm_base_low, lm_ctl, enabled = 0;
2006 struct tsi148_driver *bridge;
2007
2008 bridge = lm->parent->driver_priv;
2009
2010 mutex_lock(&lm->mtx);
2011
2012 lm_base_high = ioread32be(bridge->base + TSI148_LCSR_LMBAU);
2013 lm_base_low = ioread32be(bridge->base + TSI148_LCSR_LMBAL);
2014 lm_ctl = ioread32be(bridge->base + TSI148_LCSR_LMAT);
2015
2016 reg_join(lm_base_high, lm_base_low, lm_base);
2017
2018 if (lm_ctl & TSI148_LCSR_LMAT_EN)
2019 enabled = 1;
2020
2021 if ((lm_ctl & TSI148_LCSR_LMAT_AS_M) == TSI148_LCSR_LMAT_AS_A16)
2022 *aspace |= VME_A16;
2023
2024 if ((lm_ctl & TSI148_LCSR_LMAT_AS_M) == TSI148_LCSR_LMAT_AS_A24)
2025 *aspace |= VME_A24;
2026
2027 if ((lm_ctl & TSI148_LCSR_LMAT_AS_M) == TSI148_LCSR_LMAT_AS_A32)
2028 *aspace |= VME_A32;
2029
2030 if ((lm_ctl & TSI148_LCSR_LMAT_AS_M) == TSI148_LCSR_LMAT_AS_A64)
2031 *aspace |= VME_A64;
2032
2033
2034 if (lm_ctl & TSI148_LCSR_LMAT_SUPR)
2035 *cycle |= VME_SUPER;
2036 if (lm_ctl & TSI148_LCSR_LMAT_NPRIV)
2037 *cycle |= VME_USER;
2038 if (lm_ctl & TSI148_LCSR_LMAT_PGM)
2039 *cycle |= VME_PROG;
2040 if (lm_ctl & TSI148_LCSR_LMAT_DATA)
2041 *cycle |= VME_DATA;
2042
2043 mutex_unlock(&lm->mtx);
2044
2045 return enabled;
2046 }
2047
2048 /*
2049 * Attach a callback to a specific location monitor.
2050 *
2051 * Callback will be passed the monitor triggered.
2052 */
2053 static int tsi148_lm_attach(struct vme_lm_resource *lm, int monitor,
2054 void (*callback)(int))
2055 {
2056 u32 lm_ctl, tmp;
2057 struct vme_bridge *tsi148_bridge;
2058 struct tsi148_driver *bridge;
2059
2060 tsi148_bridge = lm->parent;
2061
2062 bridge = tsi148_bridge->driver_priv;
2063
2064 mutex_lock(&lm->mtx);
2065
2066 /* Ensure that the location monitor is configured - need PGM or DATA */
2067 lm_ctl = ioread32be(bridge->base + TSI148_LCSR_LMAT);
2068 if ((lm_ctl & (TSI148_LCSR_LMAT_PGM | TSI148_LCSR_LMAT_DATA)) == 0) {
2069 mutex_unlock(&lm->mtx);
2070 dev_err(tsi148_bridge->parent, "Location monitor not properly "
2071 "configured\n");
2072 return -EINVAL;
2073 }
2074
2075 /* Check that a callback isn't already attached */
2076 if (bridge->lm_callback[monitor] != NULL) {
2077 mutex_unlock(&lm->mtx);
2078 dev_err(tsi148_bridge->parent, "Existing callback attached\n");
2079 return -EBUSY;
2080 }
2081
2082 /* Attach callback */
2083 bridge->lm_callback[monitor] = callback;
2084
2085 /* Enable Location Monitor interrupt */
2086 tmp = ioread32be(bridge->base + TSI148_LCSR_INTEN);
2087 tmp |= TSI148_LCSR_INTEN_LMEN[monitor];
2088 iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEN);
2089
2090 tmp = ioread32be(bridge->base + TSI148_LCSR_INTEO);
2091 tmp |= TSI148_LCSR_INTEO_LMEO[monitor];
2092 iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEO);
2093
2094 /* Ensure that global Location Monitor Enable set */
2095 if ((lm_ctl & TSI148_LCSR_LMAT_EN) == 0) {
2096 lm_ctl |= TSI148_LCSR_LMAT_EN;
2097 iowrite32be(lm_ctl, bridge->base + TSI148_LCSR_LMAT);
2098 }
2099
2100 mutex_unlock(&lm->mtx);
2101
2102 return 0;
2103 }
2104
2105 /*
2106 * Detach a callback function forn a specific location monitor.
2107 */
2108 static int tsi148_lm_detach(struct vme_lm_resource *lm, int monitor)
2109 {
2110 u32 lm_en, tmp;
2111 struct tsi148_driver *bridge;
2112
2113 bridge = lm->parent->driver_priv;
2114
2115 mutex_lock(&lm->mtx);
2116
2117 /* Disable Location Monitor and ensure previous interrupts are clear */
2118 lm_en = ioread32be(bridge->base + TSI148_LCSR_INTEN);
2119 lm_en &= ~TSI148_LCSR_INTEN_LMEN[monitor];
2120 iowrite32be(lm_en, bridge->base + TSI148_LCSR_INTEN);
2121
2122 tmp = ioread32be(bridge->base + TSI148_LCSR_INTEO);
2123 tmp &= ~TSI148_LCSR_INTEO_LMEO[monitor];
2124 iowrite32be(tmp, bridge->base + TSI148_LCSR_INTEO);
2125
2126 iowrite32be(TSI148_LCSR_INTC_LMC[monitor],
2127 bridge->base + TSI148_LCSR_INTC);
2128
2129 /* Detach callback */
2130 bridge->lm_callback[monitor] = NULL;
2131
2132 /* If all location monitors disabled, disable global Location Monitor */
2133 if ((lm_en & (TSI148_LCSR_INTS_LM0S | TSI148_LCSR_INTS_LM1S |
2134 TSI148_LCSR_INTS_LM2S | TSI148_LCSR_INTS_LM3S)) == 0) {
2135 tmp = ioread32be(bridge->base + TSI148_LCSR_LMAT);
2136 tmp &= ~TSI148_LCSR_LMAT_EN;
2137 iowrite32be(tmp, bridge->base + TSI148_LCSR_LMAT);
2138 }
2139
2140 mutex_unlock(&lm->mtx);
2141
2142 return 0;
2143 }
2144
2145 /*
2146 * Determine Geographical Addressing
2147 */
2148 static int tsi148_slot_get(struct vme_bridge *tsi148_bridge)
2149 {
2150 u32 slot = 0;
2151 struct tsi148_driver *bridge;
2152
2153 bridge = tsi148_bridge->driver_priv;
2154
2155 if (!geoid) {
2156 slot = ioread32be(bridge->base + TSI148_LCSR_VSTAT);
2157 slot = slot & TSI148_LCSR_VSTAT_GA_M;
2158 } else
2159 slot = geoid;
2160
2161 return (int)slot;
2162 }
2163
2164 static void *tsi148_alloc_consistent(struct device *parent, size_t size,
2165 dma_addr_t *dma)
2166 {
2167 struct pci_dev *pdev;
2168
2169 /* Find pci_dev container of dev */
2170 pdev = to_pci_dev(parent);
2171
2172 return pci_alloc_consistent(pdev, size, dma);
2173 }
2174
2175 static void tsi148_free_consistent(struct device *parent, size_t size,
2176 void *vaddr, dma_addr_t dma)
2177 {
2178 struct pci_dev *pdev;
2179
2180 /* Find pci_dev container of dev */
2181 pdev = to_pci_dev(parent);
2182
2183 pci_free_consistent(pdev, size, vaddr, dma);
2184 }
2185
2186 /*
2187 * Configure CR/CSR space
2188 *
2189 * Access to the CR/CSR can be configured at power-up. The location of the
2190 * CR/CSR registers in the CR/CSR address space is determined by the boards
2191 * Auto-ID or Geographic address. This function ensures that the window is
2192 * enabled at an offset consistent with the boards geopgraphic address.
2193 *
2194 * Each board has a 512kB window, with the highest 4kB being used for the
2195 * boards registers, this means there is a fix length 508kB window which must
2196 * be mapped onto PCI memory.
2197 */
2198 static int tsi148_crcsr_init(struct vme_bridge *tsi148_bridge,
2199 struct pci_dev *pdev)
2200 {
2201 u32 cbar, crat, vstat;
2202 u32 crcsr_bus_high, crcsr_bus_low;
2203 int retval;
2204 struct tsi148_driver *bridge;
2205
2206 bridge = tsi148_bridge->driver_priv;
2207
2208 /* Allocate mem for CR/CSR image */
2209 bridge->crcsr_kernel = pci_zalloc_consistent(pdev, VME_CRCSR_BUF_SIZE,
2210 &bridge->crcsr_bus);
2211 if (bridge->crcsr_kernel == NULL) {
2212 dev_err(tsi148_bridge->parent, "Failed to allocate memory for "
2213 "CR/CSR image\n");
2214 return -ENOMEM;
2215 }
2216
2217 reg_split(bridge->crcsr_bus, &crcsr_bus_high, &crcsr_bus_low);
2218
2219 iowrite32be(crcsr_bus_high, bridge->base + TSI148_LCSR_CROU);
2220 iowrite32be(crcsr_bus_low, bridge->base + TSI148_LCSR_CROL);
2221
2222 /* Ensure that the CR/CSR is configured at the correct offset */
2223 cbar = ioread32be(bridge->base + TSI148_CBAR);
2224 cbar = (cbar & TSI148_CRCSR_CBAR_M)>>3;
2225
2226 vstat = tsi148_slot_get(tsi148_bridge);
2227
2228 if (cbar != vstat) {
2229 cbar = vstat;
2230 dev_info(tsi148_bridge->parent, "Setting CR/CSR offset\n");
2231 iowrite32be(cbar<<3, bridge->base + TSI148_CBAR);
2232 }
2233 dev_info(tsi148_bridge->parent, "CR/CSR Offset: %d\n", cbar);
2234
2235 crat = ioread32be(bridge->base + TSI148_LCSR_CRAT);
2236 if (crat & TSI148_LCSR_CRAT_EN)
2237 dev_info(tsi148_bridge->parent, "CR/CSR already enabled\n");
2238 else {
2239 dev_info(tsi148_bridge->parent, "Enabling CR/CSR space\n");
2240 iowrite32be(crat | TSI148_LCSR_CRAT_EN,
2241 bridge->base + TSI148_LCSR_CRAT);
2242 }
2243
2244 /* If we want flushed, error-checked writes, set up a window
2245 * over the CR/CSR registers. We read from here to safely flush
2246 * through VME writes.
2247 */
2248 if (err_chk) {
2249 retval = tsi148_master_set(bridge->flush_image, 1,
2250 (vstat * 0x80000), 0x80000, VME_CRCSR, VME_SCT,
2251 VME_D16);
2252 if (retval)
2253 dev_err(tsi148_bridge->parent, "Configuring flush image"
2254 " failed\n");
2255 }
2256
2257 return 0;
2258
2259 }
2260
2261 static void tsi148_crcsr_exit(struct vme_bridge *tsi148_bridge,
2262 struct pci_dev *pdev)
2263 {
2264 u32 crat;
2265 struct tsi148_driver *bridge;
2266
2267 bridge = tsi148_bridge->driver_priv;
2268
2269 /* Turn off CR/CSR space */
2270 crat = ioread32be(bridge->base + TSI148_LCSR_CRAT);
2271 iowrite32be(crat & ~TSI148_LCSR_CRAT_EN,
2272 bridge->base + TSI148_LCSR_CRAT);
2273
2274 /* Free image */
2275 iowrite32be(0, bridge->base + TSI148_LCSR_CROU);
2276 iowrite32be(0, bridge->base + TSI148_LCSR_CROL);
2277
2278 pci_free_consistent(pdev, VME_CRCSR_BUF_SIZE, bridge->crcsr_kernel,
2279 bridge->crcsr_bus);
2280 }
2281
2282 static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id)
2283 {
2284 int retval, i, master_num;
2285 u32 data;
2286 struct list_head *pos = NULL, *n;
2287 struct vme_bridge *tsi148_bridge;
2288 struct tsi148_driver *tsi148_device;
2289 struct vme_master_resource *master_image;
2290 struct vme_slave_resource *slave_image;
2291 struct vme_dma_resource *dma_ctrlr;
2292 struct vme_lm_resource *lm;
2293
2294 /* If we want to support more than one of each bridge, we need to
2295 * dynamically generate this so we get one per device
2296 */
2297 tsi148_bridge = kzalloc(sizeof(struct vme_bridge), GFP_KERNEL);
2298 if (tsi148_bridge == NULL) {
2299 dev_err(&pdev->dev, "Failed to allocate memory for device "
2300 "structure\n");
2301 retval = -ENOMEM;
2302 goto err_struct;
2303 }
2304
2305 tsi148_device = kzalloc(sizeof(struct tsi148_driver), GFP_KERNEL);
2306 if (tsi148_device == NULL) {
2307 dev_err(&pdev->dev, "Failed to allocate memory for device "
2308 "structure\n");
2309 retval = -ENOMEM;
2310 goto err_driver;
2311 }
2312
2313 tsi148_bridge->driver_priv = tsi148_device;
2314
2315 /* Enable the device */
2316 retval = pci_enable_device(pdev);
2317 if (retval) {
2318 dev_err(&pdev->dev, "Unable to enable device\n");
2319 goto err_enable;
2320 }
2321
2322 /* Map Registers */
2323 retval = pci_request_regions(pdev, driver_name);
2324 if (retval) {
2325 dev_err(&pdev->dev, "Unable to reserve resources\n");
2326 goto err_resource;
2327 }
2328
2329 /* map registers in BAR 0 */
2330 tsi148_device->base = ioremap_nocache(pci_resource_start(pdev, 0),
2331 4096);
2332 if (!tsi148_device->base) {
2333 dev_err(&pdev->dev, "Unable to remap CRG region\n");
2334 retval = -EIO;
2335 goto err_remap;
2336 }
2337
2338 /* Check to see if the mapping worked out */
2339 data = ioread32(tsi148_device->base + TSI148_PCFS_ID) & 0x0000FFFF;
2340 if (data != PCI_VENDOR_ID_TUNDRA) {
2341 dev_err(&pdev->dev, "CRG region check failed\n");
2342 retval = -EIO;
2343 goto err_test;
2344 }
2345
2346 /* Initialize wait queues & mutual exclusion flags */
2347 init_waitqueue_head(&tsi148_device->dma_queue[0]);
2348 init_waitqueue_head(&tsi148_device->dma_queue[1]);
2349 init_waitqueue_head(&tsi148_device->iack_queue);
2350 mutex_init(&tsi148_device->vme_int);
2351 mutex_init(&tsi148_device->vme_rmw);
2352
2353 tsi148_bridge->parent = &pdev->dev;
2354 strcpy(tsi148_bridge->name, driver_name);
2355
2356 /* Setup IRQ */
2357 retval = tsi148_irq_init(tsi148_bridge);
2358 if (retval != 0) {
2359 dev_err(&pdev->dev, "Chip Initialization failed.\n");
2360 goto err_irq;
2361 }
2362
2363 /* If we are going to flush writes, we need to read from the VME bus.
2364 * We need to do this safely, thus we read the devices own CR/CSR
2365 * register. To do this we must set up a window in CR/CSR space and
2366 * hence have one less master window resource available.
2367 */
2368 master_num = TSI148_MAX_MASTER;
2369 if (err_chk) {
2370 master_num--;
2371
2372 tsi148_device->flush_image =
2373 kmalloc(sizeof(struct vme_master_resource), GFP_KERNEL);
2374 if (tsi148_device->flush_image == NULL) {
2375 dev_err(&pdev->dev, "Failed to allocate memory for "
2376 "flush resource structure\n");
2377 retval = -ENOMEM;
2378 goto err_master;
2379 }
2380 tsi148_device->flush_image->parent = tsi148_bridge;
2381 spin_lock_init(&tsi148_device->flush_image->lock);
2382 tsi148_device->flush_image->locked = 1;
2383 tsi148_device->flush_image->number = master_num;
2384 memset(&tsi148_device->flush_image->bus_resource, 0,
2385 sizeof(struct resource));
2386 tsi148_device->flush_image->kern_base = NULL;
2387 }
2388
2389 /* Add master windows to list */
2390 INIT_LIST_HEAD(&tsi148_bridge->master_resources);
2391 for (i = 0; i < master_num; i++) {
2392 master_image = kmalloc(sizeof(struct vme_master_resource),
2393 GFP_KERNEL);
2394 if (master_image == NULL) {
2395 dev_err(&pdev->dev, "Failed to allocate memory for "
2396 "master resource structure\n");
2397 retval = -ENOMEM;
2398 goto err_master;
2399 }
2400 master_image->parent = tsi148_bridge;
2401 spin_lock_init(&master_image->lock);
2402 master_image->locked = 0;
2403 master_image->number = i;
2404 master_image->address_attr = VME_A16 | VME_A24 | VME_A32 |
2405 VME_A64 | VME_CRCSR | VME_USER1 | VME_USER2 |
2406 VME_USER3 | VME_USER4;
2407 master_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT |
2408 VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 |
2409 VME_2eSST267 | VME_2eSST320 | VME_SUPER | VME_USER |
2410 VME_PROG | VME_DATA;
2411 master_image->width_attr = VME_D16 | VME_D32;
2412 memset(&master_image->bus_resource, 0,
2413 sizeof(struct resource));
2414 master_image->kern_base = NULL;
2415 list_add_tail(&master_image->list,
2416 &tsi148_bridge->master_resources);
2417 }
2418
2419 /* Add slave windows to list */
2420 INIT_LIST_HEAD(&tsi148_bridge->slave_resources);
2421 for (i = 0; i < TSI148_MAX_SLAVE; i++) {
2422 slave_image = kmalloc(sizeof(struct vme_slave_resource),
2423 GFP_KERNEL);
2424 if (slave_image == NULL) {
2425 dev_err(&pdev->dev, "Failed to allocate memory for "
2426 "slave resource structure\n");
2427 retval = -ENOMEM;
2428 goto err_slave;
2429 }
2430 slave_image->parent = tsi148_bridge;
2431 mutex_init(&slave_image->mtx);
2432 slave_image->locked = 0;
2433 slave_image->number = i;
2434 slave_image->address_attr = VME_A16 | VME_A24 | VME_A32 |
2435 VME_A64;
2436 slave_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT |
2437 VME_2eVME | VME_2eSST | VME_2eSSTB | VME_2eSST160 |
2438 VME_2eSST267 | VME_2eSST320 | VME_SUPER | VME_USER |
2439 VME_PROG | VME_DATA;
2440 list_add_tail(&slave_image->list,
2441 &tsi148_bridge->slave_resources);
2442 }
2443
2444 /* Add dma engines to list */
2445 INIT_LIST_HEAD(&tsi148_bridge->dma_resources);
2446 for (i = 0; i < TSI148_MAX_DMA; i++) {
2447 dma_ctrlr = kmalloc(sizeof(struct vme_dma_resource),
2448 GFP_KERNEL);
2449 if (dma_ctrlr == NULL) {
2450 dev_err(&pdev->dev, "Failed to allocate memory for "
2451 "dma resource structure\n");
2452 retval = -ENOMEM;
2453 goto err_dma;
2454 }
2455 dma_ctrlr->parent = tsi148_bridge;
2456 mutex_init(&dma_ctrlr->mtx);
2457 dma_ctrlr->locked = 0;
2458 dma_ctrlr->number = i;
2459 dma_ctrlr->route_attr = VME_DMA_VME_TO_MEM |
2460 VME_DMA_MEM_TO_VME | VME_DMA_VME_TO_VME |
2461 VME_DMA_MEM_TO_MEM | VME_DMA_PATTERN_TO_VME |
2462 VME_DMA_PATTERN_TO_MEM;
2463 INIT_LIST_HEAD(&dma_ctrlr->pending);
2464 INIT_LIST_HEAD(&dma_ctrlr->running);
2465 list_add_tail(&dma_ctrlr->list,
2466 &tsi148_bridge->dma_resources);
2467 }
2468
2469 /* Add location monitor to list */
2470 INIT_LIST_HEAD(&tsi148_bridge->lm_resources);
2471 lm = kmalloc(sizeof(struct vme_lm_resource), GFP_KERNEL);
2472 if (lm == NULL) {
2473 dev_err(&pdev->dev, "Failed to allocate memory for "
2474 "location monitor resource structure\n");
2475 retval = -ENOMEM;
2476 goto err_lm;
2477 }
2478 lm->parent = tsi148_bridge;
2479 mutex_init(&lm->mtx);
2480 lm->locked = 0;
2481 lm->number = 1;
2482 lm->monitors = 4;
2483 list_add_tail(&lm->list, &tsi148_bridge->lm_resources);
2484
2485 tsi148_bridge->slave_get = tsi148_slave_get;
2486 tsi148_bridge->slave_set = tsi148_slave_set;
2487 tsi148_bridge->master_get = tsi148_master_get;
2488 tsi148_bridge->master_set = tsi148_master_set;
2489 tsi148_bridge->master_read = tsi148_master_read;
2490 tsi148_bridge->master_write = tsi148_master_write;
2491 tsi148_bridge->master_rmw = tsi148_master_rmw;
2492 tsi148_bridge->dma_list_add = tsi148_dma_list_add;
2493 tsi148_bridge->dma_list_exec = tsi148_dma_list_exec;
2494 tsi148_bridge->dma_list_empty = tsi148_dma_list_empty;
2495 tsi148_bridge->irq_set = tsi148_irq_set;
2496 tsi148_bridge->irq_generate = tsi148_irq_generate;
2497 tsi148_bridge->lm_set = tsi148_lm_set;
2498 tsi148_bridge->lm_get = tsi148_lm_get;
2499 tsi148_bridge->lm_attach = tsi148_lm_attach;
2500 tsi148_bridge->lm_detach = tsi148_lm_detach;
2501 tsi148_bridge->slot_get = tsi148_slot_get;
2502 tsi148_bridge->alloc_consistent = tsi148_alloc_consistent;
2503 tsi148_bridge->free_consistent = tsi148_free_consistent;
2504
2505 data = ioread32be(tsi148_device->base + TSI148_LCSR_VSTAT);
2506 dev_info(&pdev->dev, "Board is%s the VME system controller\n",
2507 (data & TSI148_LCSR_VSTAT_SCONS) ? "" : " not");
2508 if (!geoid)
2509 dev_info(&pdev->dev, "VME geographical address is %d\n",
2510 data & TSI148_LCSR_VSTAT_GA_M);
2511 else
2512 dev_info(&pdev->dev, "VME geographical address is set to %d\n",
2513 geoid);
2514
2515 dev_info(&pdev->dev, "VME Write and flush and error check is %s\n",
2516 err_chk ? "enabled" : "disabled");
2517
2518 retval = tsi148_crcsr_init(tsi148_bridge, pdev);
2519 if (retval) {
2520 dev_err(&pdev->dev, "CR/CSR configuration failed.\n");
2521 goto err_crcsr;
2522 }
2523
2524 retval = vme_register_bridge(tsi148_bridge);
2525 if (retval != 0) {
2526 dev_err(&pdev->dev, "Chip Registration failed.\n");
2527 goto err_reg;
2528 }
2529
2530 pci_set_drvdata(pdev, tsi148_bridge);
2531
2532 /* Clear VME bus "board fail", and "power-up reset" lines */
2533 data = ioread32be(tsi148_device->base + TSI148_LCSR_VSTAT);
2534 data &= ~TSI148_LCSR_VSTAT_BRDFL;
2535 data |= TSI148_LCSR_VSTAT_CPURST;
2536 iowrite32be(data, tsi148_device->base + TSI148_LCSR_VSTAT);
2537
2538 return 0;
2539
2540 err_reg:
2541 tsi148_crcsr_exit(tsi148_bridge, pdev);
2542 err_crcsr:
2543 err_lm:
2544 /* resources are stored in link list */
2545 list_for_each_safe(pos, n, &tsi148_bridge->lm_resources) {
2546 lm = list_entry(pos, struct vme_lm_resource, list);
2547 list_del(pos);
2548 kfree(lm);
2549 }
2550 err_dma:
2551 /* resources are stored in link list */
2552 list_for_each_safe(pos, n, &tsi148_bridge->dma_resources) {
2553 dma_ctrlr = list_entry(pos, struct vme_dma_resource, list);
2554 list_del(pos);
2555 kfree(dma_ctrlr);
2556 }
2557 err_slave:
2558 /* resources are stored in link list */
2559 list_for_each_safe(pos, n, &tsi148_bridge->slave_resources) {
2560 slave_image = list_entry(pos, struct vme_slave_resource, list);
2561 list_del(pos);
2562 kfree(slave_image);
2563 }
2564 err_master:
2565 /* resources are stored in link list */
2566 list_for_each_safe(pos, n, &tsi148_bridge->master_resources) {
2567 master_image = list_entry(pos, struct vme_master_resource,
2568 list);
2569 list_del(pos);
2570 kfree(master_image);
2571 }
2572
2573 tsi148_irq_exit(tsi148_bridge, pdev);
2574 err_irq:
2575 err_test:
2576 iounmap(tsi148_device->base);
2577 err_remap:
2578 pci_release_regions(pdev);
2579 err_resource:
2580 pci_disable_device(pdev);
2581 err_enable:
2582 kfree(tsi148_device);
2583 err_driver:
2584 kfree(tsi148_bridge);
2585 err_struct:
2586 return retval;
2587
2588 }
2589
2590 static void tsi148_remove(struct pci_dev *pdev)
2591 {
2592 struct list_head *pos = NULL;
2593 struct list_head *tmplist;
2594 struct vme_master_resource *master_image;
2595 struct vme_slave_resource *slave_image;
2596 struct vme_dma_resource *dma_ctrlr;
2597 int i;
2598 struct tsi148_driver *bridge;
2599 struct vme_bridge *tsi148_bridge = pci_get_drvdata(pdev);
2600
2601 bridge = tsi148_bridge->driver_priv;
2602
2603
2604 dev_dbg(&pdev->dev, "Driver is being unloaded.\n");
2605
2606 /*
2607 * Shutdown all inbound and outbound windows.
2608 */
2609 for (i = 0; i < 8; i++) {
2610 iowrite32be(0, bridge->base + TSI148_LCSR_IT[i] +
2611 TSI148_LCSR_OFFSET_ITAT);
2612 iowrite32be(0, bridge->base + TSI148_LCSR_OT[i] +
2613 TSI148_LCSR_OFFSET_OTAT);
2614 }
2615
2616 /*
2617 * Shutdown Location monitor.
2618 */
2619 iowrite32be(0, bridge->base + TSI148_LCSR_LMAT);
2620
2621 /*
2622 * Shutdown CRG map.
2623 */
2624 iowrite32be(0, bridge->base + TSI148_LCSR_CSRAT);
2625
2626 /*
2627 * Clear error status.
2628 */
2629 iowrite32be(0xFFFFFFFF, bridge->base + TSI148_LCSR_EDPAT);
2630 iowrite32be(0xFFFFFFFF, bridge->base + TSI148_LCSR_VEAT);
2631 iowrite32be(0x07000700, bridge->base + TSI148_LCSR_PSTAT);
2632
2633 /*
2634 * Remove VIRQ interrupt (if any)
2635 */
2636 if (ioread32be(bridge->base + TSI148_LCSR_VICR) & 0x800)
2637 iowrite32be(0x8000, bridge->base + TSI148_LCSR_VICR);
2638
2639 /*
2640 * Map all Interrupts to PCI INTA
2641 */
2642 iowrite32be(0x0, bridge->base + TSI148_LCSR_INTM1);
2643 iowrite32be(0x0, bridge->base + TSI148_LCSR_INTM2);
2644
2645 tsi148_irq_exit(tsi148_bridge, pdev);
2646
2647 vme_unregister_bridge(tsi148_bridge);
2648
2649 tsi148_crcsr_exit(tsi148_bridge, pdev);
2650
2651 /* resources are stored in link list */
2652 list_for_each_safe(pos, tmplist, &tsi148_bridge->dma_resources) {
2653 dma_ctrlr = list_entry(pos, struct vme_dma_resource, list);
2654 list_del(pos);
2655 kfree(dma_ctrlr);
2656 }
2657
2658 /* resources are stored in link list */
2659 list_for_each_safe(pos, tmplist, &tsi148_bridge->slave_resources) {
2660 slave_image = list_entry(pos, struct vme_slave_resource, list);
2661 list_del(pos);
2662 kfree(slave_image);
2663 }
2664
2665 /* resources are stored in link list */
2666 list_for_each_safe(pos, tmplist, &tsi148_bridge->master_resources) {
2667 master_image = list_entry(pos, struct vme_master_resource,
2668 list);
2669 list_del(pos);
2670 kfree(master_image);
2671 }
2672
2673 iounmap(bridge->base);
2674
2675 pci_release_regions(pdev);
2676
2677 pci_disable_device(pdev);
2678
2679 kfree(tsi148_bridge->driver_priv);
2680
2681 kfree(tsi148_bridge);
2682 }
2683
2684 module_pci_driver(tsi148_driver);
2685
2686 MODULE_PARM_DESC(err_chk, "Check for VME errors on reads and writes");
2687 module_param(err_chk, bool, 0);
2688
2689 MODULE_PARM_DESC(geoid, "Override geographical addressing");
2690 module_param(geoid, int, 0);
2691
2692 MODULE_DESCRIPTION("VME driver for the Tundra Tempe VME bridge");
2693 MODULE_LICENSE("GPL");
Linux with added FPC-III support