Linux 4.13.16
[linux/fpc-iii.git] / arch / powerpc / boot / dts / fsl / p1025rdb_32b.dts
blobb15acbaea34b5296816efa6ee5a6c02836c06233
1 /*
2  * P1025 RDB Device Tree Source (32-bit address map)
3  *
4  * Copyright 2011 Freescale Semiconductor Inc.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions are met:
8  *     * Redistributions of source code must retain the above copyright
9  *       notice, this list of conditions and the following disclaimer.
10  *     * Redistributions in binary form must reproduce the above copyright
11  *       notice, this list of conditions and the following disclaimer in the
12  *       documentation and/or other materials provided with the distribution.
13  *     * Neither the name of Freescale Semiconductor nor the
14  *       names of its contributors may be used to endorse or promote products
15  *       derived from this software without specific prior written permission.
16  *
17  *
18  * ALTERNATIVELY, this software may be distributed under the terms of the
19  * GNU General Public License ("GPL") as published by the Free Software
20  * Foundation, either version 2 of that License or (at your option) any
21  * later version.
22  *
23  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33  */
35 /include/ "p1021si-pre.dtsi"
36 / {
37         model = "fsl,P1025RDB";
38         compatible = "fsl,P1025RDB";
40         memory {
41                 device_type = "memory";
42         };
44         lbc: localbus@ffe05000 {
45                 reg = <0 0xffe05000 0 0x1000>;
47                 /* NOR, NAND Flashes */
48                 ranges = <0x0 0x0 0x0 0xef000000 0x01000000
49                           0x1 0x0 0x0 0xff800000 0x00040000>;
50         };
52         soc: soc@ffe00000 {
53                 ranges = <0x0 0x0 0xffe00000 0x100000>;
54         };
56         pci0: pcie@ffe09000 {
57                 ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000
58                           0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
59                 reg = <0 0xffe09000 0 0x1000>;
60                 pcie@0 {
61                         ranges = <0x2000000 0x0 0xe0000000
62                                   0x2000000 0x0 0xe0000000
63                                   0x0 0x20000000
65                                   0x1000000 0x0 0x0
66                                   0x1000000 0x0 0x0
67                                   0x0 0x100000>;
68                 };
69         };
71         pci1: pcie@ffe0a000 {
72                 reg = <0 0xffe0a000 0 0x1000>;
73                 ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000
74                           0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
75                 pcie@0 {
76                         ranges = <0x2000000 0x0 0xe0000000
77                                   0x2000000 0x0 0xe0000000
78                                   0x0 0x20000000
80                                   0x1000000 0x0 0x0
81                                   0x1000000 0x0 0x0
82                                   0x0 0x100000>;
83                 };
84         };
86         qe: qe@ffe80000 {
87                 ranges = <0x0 0x0 0xffe80000 0x40000>;
88                 reg = <0 0xffe80000 0 0x480>;
89                 brg-frequency = <0>;
90                 bus-frequency = <0>;
91                 status = "disabled"; /* no firmware loaded */
93                 enet3: ucc@2000 {
94                         device_type = "network";
95                         compatible = "ucc_geth";
96                         rx-clock-name = "clk12";
97                         tx-clock-name = "clk9";
98                         pio-handle = <&pio1>;
99                         phy-handle = <&qe_phy0>;
100                         phy-connection-type = "mii";
101                 };
103                 mdio@2120 {
104                         qe_phy0: ethernet-phy@0 {
105                                 interrupt-parent = <&mpic>;
106                                 interrupts = <4 1 0 0>;
107                                 reg = <0x6>;
108                         };
109                         qe_phy1: ethernet-phy@03 {
110                                 interrupt-parent = <&mpic>;
111                                 interrupts = <5 1 0 0>;
112                                 reg = <0x3>;
113                         };
114                         tbi-phy@11 {
115                                 reg = <0x11>;
116                                 device_type = "tbi-phy";
117                         };
118                 };
120                 enet4: ucc@2400 {
121                         device_type = "network";
122                         compatible = "ucc_geth";
123                         rx-clock-name = "none";
124                         tx-clock-name = "clk13";
125                         pio-handle = <&pio2>;
126                         phy-handle = <&qe_phy1>;
127                         phy-connection-type = "rmii";
128                 };
129         };
132 /include/ "p1025rdb.dtsi"
133 /include/ "p1021si-post.dtsi"