Linux 4.13.16
[linux/fpc-iii.git] / arch / powerpc / boot / dts / mpc885ads.dts
blob4e93bd961e0f6c2c9638e79e0a7f38bbebb12cdf
1 /*
2  * MPC885 ADS Device Tree Source
3  *
4  * Copyright 2006 MontaVista Software, Inc.
5  * Copyright 2007,2008 Freescale Semiconductor, Inc.
6  *
7  * This program is free software; you can redistribute  it and/or modify it
8  * under  the terms of  the GNU General  Public License as published by the
9  * Free Software Foundation;  either version 2 of the  License, or (at your
10  * option) any later version.
11  */
13 /dts-v1/;
15 / {
16         model = "MPC885ADS";
17         compatible = "fsl,mpc885ads";
18         #address-cells = <1>;
19         #size-cells = <1>;
21         cpus {
22                 #address-cells = <1>;
23                 #size-cells = <0>;
25                 PowerPC,885@0 {
26                         device_type = "cpu";
27                         reg = <0x0>;
28                         d-cache-line-size = <16>;
29                         i-cache-line-size = <16>;
30                         d-cache-size = <8192>;
31                         i-cache-size = <8192>;
32                         timebase-frequency = <0>;
33                         bus-frequency = <0>;
34                         clock-frequency = <0>;
35                         interrupts = <15 2>;    // decrementer interrupt
36                         interrupt-parent = <&PIC>;
37                 };
38         };
40         memory {
41                 device_type = "memory";
42                 reg = <0x0 0x0>;
43         };
45         localbus@ff000100 {
46                 compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus";
47                 #address-cells = <2>;
48                 #size-cells = <1>;
49                 reg = <0xff000100 0x40>;
51                 ranges = <
52                         0x0 0x0 0xfe000000 0x800000
53                         0x1 0x0 0xff080000 0x8000
54                         0x5 0x0 0xff0a0000 0x8000
55                 >;
57                 flash@0,0 {
58                         compatible = "jedec-flash";
59                         reg = <0x0 0x0 0x800000>;
60                         bank-width = <4>;
61                         device-width = <1>;
62                 };
64                 board-control@1,0 {
65                         reg = <0x1 0x0 0x20 0x5 0x300 0x4>;
66                         compatible = "fsl,mpc885ads-bcsr";
67                 };
68         };
70         soc@ff000000 {
71                 compatible = "fsl,mpc885", "fsl,pq1-soc";
72                 #address-cells = <1>;
73                 #size-cells = <1>;
74                 device_type = "soc";
75                 ranges = <0x0 0xff000000 0x4000>;
76                 bus-frequency = <0>;
78                 // Temporary -- will go away once kernel uses ranges for get_immrbase().
79                 reg = <0xff000000 0x4000>;
81                 mdio@e00 {
82                         compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio";
83                         reg = <0xe00 0x188>;
84                         #address-cells = <1>;
85                         #size-cells = <0>;
87                         PHY0: ethernet-phy@0 {
88                                 reg = <0x0>;
89                         };
91                         PHY1: ethernet-phy@1 {
92                                 reg = <0x1>;
93                         };
95                         PHY2: ethernet-phy@2 {
96                                 reg = <0x2>;
97                         };
98                 };
100                 ethernet@e00 {
101                         device_type = "network";
102                         compatible = "fsl,mpc885-fec-enet",
103                                      "fsl,pq1-fec-enet";
104                         reg = <0xe00 0x188>;
105                         local-mac-address = [ 00 00 00 00 00 00 ];
106                         interrupts = <3 1>;
107                         interrupt-parent = <&PIC>;
108                         phy-handle = <&PHY0>;
109                         linux,network-index = <0>;
110                 };
112                 ethernet@1e00 {
113                         device_type = "network";
114                         compatible = "fsl,mpc885-fec-enet",
115                                      "fsl,pq1-fec-enet";
116                         reg = <0x1e00 0x188>;
117                         local-mac-address = [ 00 00 00 00 00 00 ];
118                         interrupts = <7 1>;
119                         interrupt-parent = <&PIC>;
120                         phy-handle = <&PHY1>;
121                         linux,network-index = <1>;
122                 };
124                 PIC: interrupt-controller@0 {
125                         interrupt-controller;
126                         #interrupt-cells = <2>;
127                         reg = <0x0 0x24>;
128                         compatible = "fsl,mpc885-pic", "fsl,pq1-pic";
129                 };
131                 pcmcia@80 {
132                         #address-cells = <3>;
133                         #interrupt-cells = <1>;
134                         #size-cells = <2>;
135                         compatible = "fsl,pq-pcmcia";
136                         device_type = "pcmcia";
137                         reg = <0x80 0x80>;
138                         interrupt-parent = <&PIC>;
139                         interrupts = <13 1>;
140                 };
142                 cpm@9c0 {
143                         #address-cells = <1>;
144                         #size-cells = <1>;
145                         compatible = "fsl,mpc885-cpm", "fsl,cpm1";
146                         command-proc = <0x9c0>;
147                         interrupts = <0>;       // cpm error interrupt
148                         interrupt-parent = <&CPM_PIC>;
149                         reg = <0x9c0 0x40>;
150                         ranges;
152                         muram@2000 {
153                                 #address-cells = <1>;
154                                 #size-cells = <1>;
155                                 ranges = <0x0 0x2000 0x2000>;
157                                 data@0 {
158                                         compatible = "fsl,cpm-muram-data";
159                                         reg = <0x0 0x1c00>;
160                                 };
161                         };
163                         brg@9f0 {
164                                 compatible = "fsl,mpc885-brg",
165                                              "fsl,cpm1-brg",
166                                              "fsl,cpm-brg";
167                                 clock-frequency = <0>;
168                                 reg = <0x9f0 0x10>;
169                         };
171                         CPM_PIC: interrupt-controller@930 {
172                                 interrupt-controller;
173                                 #interrupt-cells = <1>;
174                                 interrupts = <5 2 0 2>;
175                                 interrupt-parent = <&PIC>;
176                                 reg = <0x930 0x20>;
177                                 compatible = "fsl,mpc885-cpm-pic",
178                                              "fsl,cpm1-pic";
179                         };
181                         serial@a80 {
182                                 device_type = "serial";
183                                 compatible = "fsl,mpc885-smc-uart",
184                                              "fsl,cpm1-smc-uart";
185                                 reg = <0xa80 0x10 0x3e80 0x40>;
186                                 interrupts = <4>;
187                                 interrupt-parent = <&CPM_PIC>;
188                                 fsl,cpm-brg = <1>;
189                                 fsl,cpm-command = <0x90>;
190                         };
192                         serial@a90 {
193                                 device_type = "serial";
194                                 compatible = "fsl,mpc885-smc-uart",
195                                              "fsl,cpm1-smc-uart";
196                                 reg = <0xa90 0x10 0x3f80 0x40>;
197                                 interrupts = <3>;
198                                 interrupt-parent = <&CPM_PIC>;
199                                 fsl,cpm-brg = <2>;
200                                 fsl,cpm-command = <0xd0>;
201                         };
203                         ethernet@a40 {
204                                 device_type = "network";
205                                 compatible = "fsl,mpc885-scc-enet",
206                                              "fsl,cpm1-scc-enet";
207                                 reg = <0xa40 0x18 0x3e00 0x100>;
208                                 local-mac-address = [ 00 00 00 00 00 00 ];
209                                 interrupts = <28>;
210                                 interrupt-parent = <&CPM_PIC>;
211                                 phy-handle = <&PHY2>;
212                                 fsl,cpm-command = <0x80>;
213                                 linux,network-index = <2>;
214                         };
216                         i2c@860 {
217                                 compatible = "fsl,mpc885-i2c",
218                                              "fsl,cpm1-i2c";
219                                 reg = <0x860 0x20 0x3c80 0x30>;
220                                 interrupts = <16>;
221                                 interrupt-parent = <&CPM_PIC>;
222                                 fsl,cpm-command = <0x10>;
223                                 #address-cells = <1>;
224                                 #size-cells = <0>;
225                         };
226                 };
227         };
229         chosen {
230                 linux,stdout-path = "/soc/cpm/serial@a80";
231         };