4 * Maintained by Kumar Gala (see MAINTAINERS for contact information)
6 * 2006 (c) MontaVista Software, Inc.
7 * Vitaly Bordug <vbordug@ru.mvista.com>
9 * This program is free software; you can redistribute it and/or modify it
10 * under the terms of the GNU General Public License as published by the
11 * Free Software Foundation; either version 2 of the License, or (at your
12 * option) any later version.
15 #include <linux/stddef.h>
16 #include <linux/kernel.h>
17 #include <linux/init.h>
18 #include <linux/errno.h>
19 #include <linux/major.h>
20 #include <linux/delay.h>
21 #include <linux/irq.h>
22 #include <linux/export.h>
23 #include <linux/device.h>
24 #include <linux/platform_device.h>
26 #include <linux/of_platform.h>
27 #include <linux/phy.h>
28 #include <linux/spi/spi.h>
29 #include <linux/fsl_devices.h>
30 #include <linux/fs_enet_pd.h>
31 #include <linux/fs_uart_pd.h>
32 #include <linux/reboot.h>
34 #include <linux/atomic.h>
39 #include <asm/machdep.h>
40 #include <sysdev/fsl_soc.h>
41 #include <mm/mmu_decl.h>
43 #include <asm/fsl_hcalls.h> /* For the Freescale hypervisor */
45 extern void init_fcc_ioports(struct fs_platform_info
*);
46 extern void init_fec_ioports(struct fs_platform_info
*);
47 extern void init_smc_ioports(struct fs_uart_platform_info
*);
48 static phys_addr_t immrbase
= -1;
50 phys_addr_t
get_immrbase(void)
52 struct device_node
*soc
;
57 soc
= of_find_node_by_type(NULL
, "soc");
61 const __be32
*prop
= of_get_property(soc
, "#address-cells", &size
);
63 if (prop
&& size
== 4)
64 naddr
= be32_to_cpup(prop
);
68 prop
= of_get_property(soc
, "ranges", &size
);
70 immrbase
= of_translate_address(soc
, prop
+ naddr
);
78 EXPORT_SYMBOL(get_immrbase
);
80 u32
fsl_get_sys_freq(void)
82 static u32 sysfreq
= -1;
83 struct device_node
*soc
;
88 soc
= of_find_node_by_type(NULL
, "soc");
92 of_property_read_u32(soc
, "clock-frequency", &sysfreq
);
93 if (sysfreq
== -1 || !sysfreq
)
94 of_property_read_u32(soc
, "bus-frequency", &sysfreq
);
99 EXPORT_SYMBOL(fsl_get_sys_freq
);
101 #if defined(CONFIG_CPM2) || defined(CONFIG_QUICC_ENGINE) || defined(CONFIG_8xx)
103 u32
get_brgfreq(void)
105 static u32 brgfreq
= -1;
106 struct device_node
*node
;
111 node
= of_find_compatible_node(NULL
, NULL
, "fsl,cpm-brg");
113 of_property_read_u32(node
, "clock-frequency", &brgfreq
);
118 /* Legacy device binding -- will go away when no users are left. */
119 node
= of_find_node_by_type(NULL
, "cpm");
121 node
= of_find_compatible_node(NULL
, NULL
, "fsl,qe");
123 node
= of_find_node_by_type(NULL
, "qe");
126 of_property_read_u32(node
, "brg-frequency", &brgfreq
);
127 if (brgfreq
== -1 || !brgfreq
)
128 if (!of_property_read_u32(node
, "bus-frequency",
137 EXPORT_SYMBOL(get_brgfreq
);
139 u32
get_baudrate(void)
141 static u32 fs_baudrate
= -1;
142 struct device_node
*node
;
144 if (fs_baudrate
!= -1)
147 node
= of_find_node_by_type(NULL
, "serial");
149 of_property_read_u32(node
, "current-speed", &fs_baudrate
);
156 EXPORT_SYMBOL(get_baudrate
);
157 #endif /* CONFIG_CPM2 */
159 #if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
160 static __be32 __iomem
*rstcr
;
162 static int fsl_rstcr_restart(struct notifier_block
*this,
163 unsigned long mode
, void *cmd
)
166 /* set reset control register */
167 out_be32(rstcr
, 0x2); /* HRESET_REQ */
172 static int __init
setup_rstcr(void)
174 struct device_node
*np
;
176 static struct notifier_block restart_handler
= {
177 .notifier_call
= fsl_rstcr_restart
,
181 for_each_node_by_name(np
, "global-utilities") {
182 if ((of_get_property(np
, "fsl,has-rstcr", NULL
))) {
183 rstcr
= of_iomap(np
, 0) + 0xb0;
185 printk (KERN_ERR
"Error: reset control "
186 "register not mapped!\n");
188 register_restart_handler(&restart_handler
);
199 arch_initcall(setup_rstcr
);
203 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
204 struct platform_diu_data_ops diu_ops
;
205 EXPORT_SYMBOL(diu_ops
);
208 #ifdef CONFIG_EPAPR_PARAVIRT
210 * Restart the current partition
212 * This function should be assigned to the ppc_md.restart function pointer,
213 * to initiate a partition restart when we're running under the Freescale
216 void __noreturn
fsl_hv_restart(char *cmd
)
218 pr_info("hv restart\n");
219 fh_partition_restart(-1);
224 * Halt the current partition
226 * This function should be assigned to the pm_power_off and ppc_md.halt
227 * function pointers, to shut down the partition when we're running under
228 * the Freescale hypervisor.
230 void __noreturn
fsl_hv_halt(void)
232 pr_info("hv exit\n");
233 fh_partition_stop(-1);