arch/powerpc/sysdev/ppc4xx_soc.c

   1 /*
   2  * IBM/AMCC PPC4xx SoC setup code
   3  *
   4  * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
   5  *
   6  * L2 cache routines cloned from arch/ppc/syslib/ibm440gx_common.c which is:
   7  *   Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
   8  *   Copyright (c) 2003 - 2006 Zultys Technologies
   9  *
  10  * This program is free software; you can redistribute  it and/or modify it
  11  * under  the terms of  the GNU General  Public License as published by the
  12  * Free Software Foundation;  either version 2 of the  License, or (at your
  13  * option) any later version.
  14  */
  15
  16 #include <linux/stddef.h>
  17 #include <linux/kernel.h>
  18 #include <linux/init.h>
  19 #include <linux/errno.h>
  20 #include <linux/interrupt.h>
  21 #include <linux/irq.h>
  22 #include <linux/of_irq.h>
  23 #include <linux/of_platform.h>
  24
  25 #include <asm/dcr.h>
  26 #include <asm/dcr-regs.h>
  27 #include <asm/reg.h>
  28
  29 static u32 dcrbase_l2c;
  30
  31 /*
  32  * L2-cache
  33  */
  34
  35 /* Issue L2C diagnostic command */
  36 static inline u32 l2c_diag(u32 addr)
  37 {
  38         mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, addr);
  39         mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_DIAG);
  40         while (!(mfdcr(dcrbase_l2c + DCRN_L2C0_SR) & L2C_SR_CC))
  41                 ;
  42
  43         return mfdcr(dcrbase_l2c + DCRN_L2C0_DATA);
  44 }
  45
  46 static irqreturn_t l2c_error_handler(int irq, void *dev)
  47 {
  48         u32 sr = mfdcr(dcrbase_l2c + DCRN_L2C0_SR);
  49
  50         if (sr & L2C_SR_CPE) {
  51                 /* Read cache trapped address */
  52                 u32 addr = l2c_diag(0x42000000);
  53                 printk(KERN_EMERG "L2C: Cache Parity Error, addr[16:26] = 0x%08x\n",
  54                        addr);
  55         }
  56         if (sr & L2C_SR_TPE) {
  57                 /* Read tag trapped address */
  58                 u32 addr = l2c_diag(0x82000000) >> 16;
  59                 printk(KERN_EMERG "L2C: Tag Parity Error, addr[16:26] = 0x%08x\n",
  60                        addr);
  61         }
  62
  63         /* Clear parity errors */
  64         if (sr & (L2C_SR_CPE | L2C_SR_TPE)){
  65                 mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, 0);
  66                 mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE);
  67         } else {
  68                 printk(KERN_EMERG "L2C: LRU error\n");
  69         }
  70
  71         return IRQ_HANDLED;
  72 }
  73
  74 static int __init ppc4xx_l2c_probe(void)
  75 {
  76         struct device_node *np;
  77         u32 r;
  78         unsigned long flags;
  79         int irq;
  80         const u32 *dcrreg;
  81         u32 dcrbase_isram;
  82         int len;
  83         const u32 *prop;
  84         u32 l2_size;
  85
  86         np = of_find_compatible_node(NULL, NULL, "ibm,l2-cache");
  87         if (!np)
  88                 return 0;
  89
  90         /* Get l2 cache size */
  91         prop = of_get_property(np, "cache-size", NULL);
  92         if (prop == NULL) {
  93                 printk(KERN_ERR "%s: Can't get cache-size!\n", np->full_name);
  94                 of_node_put(np);
  95                 return -ENODEV;
  96         }
  97         l2_size = prop[0];
  98
  99         /* Map DCRs */
 100         dcrreg = of_get_property(np, "dcr-reg", &len);
 101         if (!dcrreg || (len != 4 * sizeof(u32))) {
 102                 printk(KERN_ERR "%s: Can't get DCR register base !",
 103                        np->full_name);
 104                 of_node_put(np);
 105                 return -ENODEV;
 106         }
 107         dcrbase_isram = dcrreg[0];
 108         dcrbase_l2c = dcrreg[2];
 109
 110         /* Get and map irq number from device tree */
 111         irq = irq_of_parse_and_map(np, 0);
 112         if (!irq) {
 113                 printk(KERN_ERR "irq_of_parse_and_map failed\n");
 114                 of_node_put(np);
 115                 return -ENODEV;
 116         }
 117
 118         /* Install error handler */
 119         if (request_irq(irq, l2c_error_handler, 0, "L2C", 0) < 0) {
 120                 printk(KERN_ERR "Cannot install L2C error handler"
 121                        ", cache is not enabled\n");
 122                 of_node_put(np);
 123                 return -ENODEV;
 124         }
 125
 126         local_irq_save(flags);
 127         asm volatile ("sync" ::: "memory");
 128
 129         /* Disable SRAM */
 130         mtdcr(dcrbase_isram + DCRN_SRAM0_DPC,
 131               mfdcr(dcrbase_isram + DCRN_SRAM0_DPC) & ~SRAM_DPC_ENABLE);
 132         mtdcr(dcrbase_isram + DCRN_SRAM0_SB0CR,
 133               mfdcr(dcrbase_isram + DCRN_SRAM0_SB0CR) & ~SRAM_SBCR_BU_MASK);
 134         mtdcr(dcrbase_isram + DCRN_SRAM0_SB1CR,
 135               mfdcr(dcrbase_isram + DCRN_SRAM0_SB1CR) & ~SRAM_SBCR_BU_MASK);
 136         mtdcr(dcrbase_isram + DCRN_SRAM0_SB2CR,
 137               mfdcr(dcrbase_isram + DCRN_SRAM0_SB2CR) & ~SRAM_SBCR_BU_MASK);
 138         mtdcr(dcrbase_isram + DCRN_SRAM0_SB3CR,
 139               mfdcr(dcrbase_isram + DCRN_SRAM0_SB3CR) & ~SRAM_SBCR_BU_MASK);
 140
 141         /* Enable L2_MODE without ICU/DCU */
 142         r = mfdcr(dcrbase_l2c + DCRN_L2C0_CFG) &
 143                 ~(L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_SS_MASK);
 144         r |= L2C_CFG_L2M | L2C_CFG_SS_256;
 145         mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r);
 146
 147         mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, 0);
 148
 149         /* Hardware Clear Command */
 150         mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_HCC);
 151         while (!(mfdcr(dcrbase_l2c + DCRN_L2C0_SR) & L2C_SR_CC))
 152                 ;
 153
 154         /* Clear Cache Parity and Tag Errors */
 155         mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE);
 156
 157         /* Enable 64G snoop region starting at 0 */
 158         r = mfdcr(dcrbase_l2c + DCRN_L2C0_SNP0) &
 159                 ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK);
 160         r |= L2C_SNP_SSR_32G | L2C_SNP_ESR;
 161         mtdcr(dcrbase_l2c + DCRN_L2C0_SNP0, r);
 162
 163         r = mfdcr(dcrbase_l2c + DCRN_L2C0_SNP1) &
 164                 ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK);
 165         r |= 0x80000000 | L2C_SNP_SSR_32G | L2C_SNP_ESR;
 166         mtdcr(dcrbase_l2c + DCRN_L2C0_SNP1, r);
 167
 168         asm volatile ("sync" ::: "memory");
 169
 170         /* Enable ICU/DCU ports */
 171         r = mfdcr(dcrbase_l2c + DCRN_L2C0_CFG);
 172         r &= ~(L2C_CFG_DCW_MASK | L2C_CFG_PMUX_MASK | L2C_CFG_PMIM
 173                | L2C_CFG_TPEI | L2C_CFG_CPEI | L2C_CFG_NAM | L2C_CFG_NBRM);
 174         r |= L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_TPC | L2C_CFG_CPC | L2C_CFG_FRAN
 175                 | L2C_CFG_CPIM | L2C_CFG_TPIM | L2C_CFG_LIM | L2C_CFG_SMCM;
 176
 177         /* Check for 460EX/GT special handling */
 178         if (of_device_is_compatible(np, "ibm,l2-cache-460ex") ||
 179             of_device_is_compatible(np, "ibm,l2-cache-460gt"))
 180                 r |= L2C_CFG_RDBW;
 181
 182         mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r);
 183
 184         asm volatile ("sync; isync" ::: "memory");
 185         local_irq_restore(flags);
 186
 187         printk(KERN_INFO "%dk L2-cache enabled\n", l2_size >> 10);
 188
 189         of_node_put(np);
 190         return 0;
 191 }
 192 arch_initcall(ppc4xx_l2c_probe);
 193
 194 /*
 195  * Apply a system reset. Alternatively a board specific value may be
 196  * provided via the "reset-type" property in the cpu node.
 197  */
 198 void ppc4xx_reset_system(char *cmd)
 199 {
 200         struct device_node *np;
 201         u32 reset_type = DBCR0_RST_SYSTEM;
 202         const u32 *prop;
 203
 204         np = of_find_node_by_type(NULL, "cpu");
 205         if (np) {
 206                 prop = of_get_property(np, "reset-type", NULL);
 207
 208                 /*
 209                  * Check if property exists and if it is in range:
 210                  * 1 - PPC4xx core reset
 211                  * 2 - PPC4xx chip reset
 212                  * 3 - PPC4xx system reset (default)
 213                  */
 214                 if ((prop) && ((prop[0] >= 1) && (prop[0] <= 3)))
 215                         reset_type = prop[0] << 28;
 216         }
 217
 218         mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | reset_type);
 219
 220         while (1)
 221                 ;       /* Just in case the reset doesn't work */
 222 }