arch/x86/pci/broadcom_bus.c

   1 /*
   2  * Read address ranges from a Broadcom CNB20LE Host Bridge
   3  *
   4  * Copyright (c) 2010 Ira W. Snyder <iws@ovro.caltech.edu>
   5  *
   6  * This program is free software; you can redistribute it and/or modify it
   7  * under the terms of the GNU General Public License as published by the
   8  * Free Software Foundation; either version 2 of the License, or (at your
   9  * option) any later version.
  10  */
  11
  12 #include <linux/acpi.h>
  13 #include <linux/delay.h>
  14 #include <linux/dmi.h>
  15 #include <linux/pci.h>
  16 #include <linux/init.h>
  17 #include <asm/pci_x86.h>
  18 #include <asm/pci-direct.h>
  19
  20 #include "bus_numa.h"
  21
  22 static void __init cnb20le_res(u8 bus, u8 slot, u8 func)
  23 {
  24         struct pci_root_info *info;
  25         struct pci_root_res *root_res;
  26         struct resource res;
  27         u16 word1, word2;
  28         u8 fbus, lbus;
  29
  30         /* read the PCI bus numbers */
  31         fbus = read_pci_config_byte(bus, slot, func, 0x44);
  32         lbus = read_pci_config_byte(bus, slot, func, 0x45);
  33         info = alloc_pci_root_info(fbus, lbus, 0, 0);
  34
  35         /*
  36          * Add the legacy IDE ports on bus 0
  37          *
  38          * These do not exist anywhere in the bridge registers, AFAICT. I do
  39          * not have the datasheet, so this is the best I can do.
  40          */
  41         if (fbus == 0) {
  42                 update_res(info, 0x01f0, 0x01f7, IORESOURCE_IO, 0);
  43                 update_res(info, 0x03f6, 0x03f6, IORESOURCE_IO, 0);
  44                 update_res(info, 0x0170, 0x0177, IORESOURCE_IO, 0);
  45                 update_res(info, 0x0376, 0x0376, IORESOURCE_IO, 0);
  46                 update_res(info, 0xffa0, 0xffaf, IORESOURCE_IO, 0);
  47         }
  48
  49         /* read the non-prefetchable memory window */
  50         word1 = read_pci_config_16(bus, slot, func, 0xc0);
  51         word2 = read_pci_config_16(bus, slot, func, 0xc2);
  52         if (word1 != word2) {
  53                 res.start = (word1 << 16) | 0x0000;
  54                 res.end   = (word2 << 16) | 0xffff;
  55                 res.flags = IORESOURCE_MEM;
  56                 update_res(info, res.start, res.end, res.flags, 0);
  57         }
  58
  59         /* read the prefetchable memory window */
  60         word1 = read_pci_config_16(bus, slot, func, 0xc4);
  61         word2 = read_pci_config_16(bus, slot, func, 0xc6);
  62         if (word1 != word2) {
  63                 res.start = ((resource_size_t) word1 << 16) | 0x0000;
  64                 res.end   = ((resource_size_t) word2 << 16) | 0xffff;
  65                 res.flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
  66                 update_res(info, res.start, res.end, res.flags, 0);
  67         }
  68
  69         /* read the IO port window */
  70         word1 = read_pci_config_16(bus, slot, func, 0xd0);
  71         word2 = read_pci_config_16(bus, slot, func, 0xd2);
  72         if (word1 != word2) {
  73                 res.start = word1;
  74                 res.end   = word2;
  75                 res.flags = IORESOURCE_IO;
  76                 update_res(info, res.start, res.end, res.flags, 0);
  77         }
  78
  79         /* print information about this host bridge */
  80         res.start = fbus;
  81         res.end   = lbus;
  82         res.flags = IORESOURCE_BUS;
  83         printk(KERN_INFO "CNB20LE PCI Host Bridge (domain 0000 %pR)\n", &res);
  84
  85         list_for_each_entry(root_res, &info->resources, list)
  86                 printk(KERN_INFO "host bridge window %pR\n", &root_res->res);
  87 }
  88
  89 static int __init broadcom_postcore_init(void)
  90 {
  91         u8 bus = 0, slot = 0;
  92         u32 id;
  93         u16 vendor, device;
  94
  95 #ifdef CONFIG_ACPI
  96         /*
  97          * We should get host bridge information from ACPI unless the BIOS
  98          * doesn't support it.
  99          */
 100         if (acpi_os_get_root_pointer())
 101                 return 0;
 102 #endif
 103
 104         id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID);
 105         vendor = id & 0xffff;
 106         device = (id >> 16) & 0xffff;
 107
 108         if (vendor == PCI_VENDOR_ID_SERVERWORKS &&
 109             device == PCI_DEVICE_ID_SERVERWORKS_LE) {
 110                 cnb20le_res(bus, slot, 0);
 111                 cnb20le_res(bus, slot, 1);
 112         }
 113         return 0;
 114 }
 115
 116 postcore_initcall(broadcom_postcore_init);