kernel/debug/gdbstub.c

   1 /*
   2  * Kernel Debug Core
   3  *
   4  * Maintainer: Jason Wessel <jason.wessel@windriver.com>
   5  *
   6  * Copyright (C) 2000-2001 VERITAS Software Corporation.
   7  * Copyright (C) 2002-2004 Timesys Corporation
   8  * Copyright (C) 2003-2004 Amit S. Kale <amitkale@linsyssoft.com>
   9  * Copyright (C) 2004 Pavel Machek <pavel@ucw.cz>
  10  * Copyright (C) 2004-2006 Tom Rini <trini@kernel.crashing.org>
  11  * Copyright (C) 2004-2006 LinSysSoft Technologies Pvt. Ltd.
  12  * Copyright (C) 2005-2009 Wind River Systems, Inc.
  13  * Copyright (C) 2007 MontaVista Software, Inc.
  14  * Copyright (C) 2008 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
  15  *
  16  * Contributors at various stages not listed above:
  17  *  Jason Wessel ( jason.wessel@windriver.com )
  18  *  George Anzinger <george@mvista.com>
  19  *  Anurekh Saxena (anurekh.saxena@timesys.com)
  20  *  Lake Stevens Instrument Division (Glenn Engel)
  21  *  Jim Kingdon, Cygnus Support.
  22  *
  23  * Original KGDB stub: David Grothe <dave@gcom.com>,
  24  * Tigran Aivazian <tigran@sco.com>
  25  *
  26  * This file is licensed under the terms of the GNU General Public License
  27  * version 2. This program is licensed "as is" without any warranty of any
  28  * kind, whether express or implied.
  29  */
  30
  31 #include <linux/kernel.h>
  32 #include <linux/sched/signal.h>
  33 #include <linux/kgdb.h>
  34 #include <linux/kdb.h>
  35 #include <linux/serial_core.h>
  36 #include <linux/reboot.h>
  37 #include <linux/uaccess.h>
  38 #include <asm/cacheflush.h>
  39 #include <asm/unaligned.h>
  40 #include "debug_core.h"
  41
  42 #define KGDB_MAX_THREAD_QUERY 17
  43
  44 /* Our I/O buffers. */
  45 static char                     remcom_in_buffer[BUFMAX];
  46 static char                     remcom_out_buffer[BUFMAX];
  47 static int                      gdbstub_use_prev_in_buf;
  48 static int                      gdbstub_prev_in_buf_pos;
  49
  50 /* Storage for the registers, in GDB format. */
  51 static unsigned long            gdb_regs[(NUMREGBYTES +
  52                                         sizeof(unsigned long) - 1) /
  53                                         sizeof(unsigned long)];
  54
  55 /*
  56  * GDB remote protocol parser:
  57  */
  58
  59 #ifdef CONFIG_KGDB_KDB
  60 static int gdbstub_read_wait(void)
  61 {
  62         int ret = -1;
  63         int i;
  64
  65         if (unlikely(gdbstub_use_prev_in_buf)) {
  66                 if (gdbstub_prev_in_buf_pos < gdbstub_use_prev_in_buf)
  67                         return remcom_in_buffer[gdbstub_prev_in_buf_pos++];
  68                 else
  69                         gdbstub_use_prev_in_buf = 0;
  70         }
  71
  72         /* poll any additional I/O interfaces that are defined */
  73         while (ret < 0)
  74                 for (i = 0; kdb_poll_funcs[i] != NULL; i++) {
  75                         ret = kdb_poll_funcs[i]();
  76                         if (ret > 0)
  77                                 break;
  78                 }
  79         return ret;
  80 }
  81 #else
  82 static int gdbstub_read_wait(void)
  83 {
  84         int ret = dbg_io_ops->read_char();
  85         while (ret == NO_POLL_CHAR)
  86                 ret = dbg_io_ops->read_char();
  87         return ret;
  88 }
  89 #endif
  90 /* scan for the sequence $<data>#<checksum> */
  91 static void get_packet(char *buffer)
  92 {
  93         unsigned char checksum;
  94         unsigned char xmitcsum;
  95         int count;
  96         char ch;
  97
  98         do {
  99                 /*
 100                  * Spin and wait around for the start character, ignore all
 101                  * other characters:
 102                  */
 103                 while ((ch = (gdbstub_read_wait())) != '$')
 104                         /* nothing */;
 105
 106                 kgdb_connected = 1;
 107                 checksum = 0;
 108                 xmitcsum = -1;
 109
 110                 count = 0;
 111
 112                 /*
 113                  * now, read until a # or end of buffer is found:
 114                  */
 115                 while (count < (BUFMAX - 1)) {
 116                         ch = gdbstub_read_wait();
 117                         if (ch == '#')
 118                                 break;
 119                         checksum = checksum + ch;
 120                         buffer[count] = ch;
 121                         count = count + 1;
 122                 }
 123
 124                 if (ch == '#') {
 125                         xmitcsum = hex_to_bin(gdbstub_read_wait()) << 4;
 126                         xmitcsum += hex_to_bin(gdbstub_read_wait());
 127
 128                         if (checksum != xmitcsum)
 129                                 /* failed checksum */
 130                                 dbg_io_ops->write_char('-');
 131                         else
 132                                 /* successful transfer */
 133                                 dbg_io_ops->write_char('+');
 134                         if (dbg_io_ops->flush)
 135                                 dbg_io_ops->flush();
 136                 }
 137                 buffer[count] = 0;
 138         } while (checksum != xmitcsum);
 139 }
 140
 141 /*
 142  * Send the packet in buffer.
 143  * Check for gdb connection if asked for.
 144  */
 145 static void put_packet(char *buffer)
 146 {
 147         unsigned char checksum;
 148         int count;
 149         char ch;
 150
 151         /*
 152          * $<packet info>#<checksum>.
 153          */
 154         while (1) {
 155                 dbg_io_ops->write_char('$');
 156                 checksum = 0;
 157                 count = 0;
 158
 159                 while ((ch = buffer[count])) {
 160                         dbg_io_ops->write_char(ch);
 161                         checksum += ch;
 162                         count++;
 163                 }
 164
 165                 dbg_io_ops->write_char('#');
 166                 dbg_io_ops->write_char(hex_asc_hi(checksum));
 167                 dbg_io_ops->write_char(hex_asc_lo(checksum));
 168                 if (dbg_io_ops->flush)
 169                         dbg_io_ops->flush();
 170
 171                 /* Now see what we get in reply. */
 172                 ch = gdbstub_read_wait();
 173
 174                 if (ch == 3)
 175                         ch = gdbstub_read_wait();
 176
 177                 /* If we get an ACK, we are done. */
 178                 if (ch == '+')
 179                         return;
 180
 181                 /*
 182                  * If we get the start of another packet, this means
 183                  * that GDB is attempting to reconnect.  We will NAK
 184                  * the packet being sent, and stop trying to send this
 185                  * packet.
 186                  */
 187                 if (ch == '$') {
 188                         dbg_io_ops->write_char('-');
 189                         if (dbg_io_ops->flush)
 190                                 dbg_io_ops->flush();
 191                         return;
 192                 }
 193         }
 194 }
 195
 196 static char gdbmsgbuf[BUFMAX + 1];
 197
 198 void gdbstub_msg_write(const char *s, int len)
 199 {
 200         char *bufptr;
 201         int wcount;
 202         int i;
 203
 204         if (len == 0)
 205                 len = strlen(s);
 206
 207         /* 'O'utput */
 208         gdbmsgbuf[0] = 'O';
 209
 210         /* Fill and send buffers... */
 211         while (len > 0) {
 212                 bufptr = gdbmsgbuf + 1;
 213
 214                 /* Calculate how many this time */
 215                 if ((len << 1) > (BUFMAX - 2))
 216                         wcount = (BUFMAX - 2) >> 1;
 217                 else
 218                         wcount = len;
 219
 220                 /* Pack in hex chars */
 221                 for (i = 0; i < wcount; i++)
 222                         bufptr = hex_byte_pack(bufptr, s[i]);
 223                 *bufptr = '\0';
 224
 225                 /* Move up */
 226                 s += wcount;
 227                 len -= wcount;
 228
 229                 /* Write packet */
 230                 put_packet(gdbmsgbuf);
 231         }
 232 }
 233
 234 /*
 235  * Convert the memory pointed to by mem into hex, placing result in
 236  * buf.  Return a pointer to the last char put in buf (null). May
 237  * return an error.
 238  */
 239 char *kgdb_mem2hex(char *mem, char *buf, int count)
 240 {
 241         char *tmp;
 242         int err;
 243
 244         /*
 245          * We use the upper half of buf as an intermediate buffer for the
 246          * raw memory copy.  Hex conversion will work against this one.
 247          */
 248         tmp = buf + count;
 249
 250         err = probe_kernel_read(tmp, mem, count);
 251         if (err)
 252                 return NULL;
 253         while (count > 0) {
 254                 buf = hex_byte_pack(buf, *tmp);
 255                 tmp++;
 256                 count--;
 257         }
 258         *buf = 0;
 259
 260         return buf;
 261 }
 262
 263 /*
 264  * Convert the hex array pointed to by buf into binary to be placed in
 265  * mem.  Return a pointer to the character AFTER the last byte
 266  * written.  May return an error.
 267  */
 268 int kgdb_hex2mem(char *buf, char *mem, int count)
 269 {
 270         char *tmp_raw;
 271         char *tmp_hex;
 272
 273         /*
 274          * We use the upper half of buf as an intermediate buffer for the
 275          * raw memory that is converted from hex.
 276          */
 277         tmp_raw = buf + count * 2;
 278
 279         tmp_hex = tmp_raw - 1;
 280         while (tmp_hex >= buf) {
 281                 tmp_raw--;
 282                 *tmp_raw = hex_to_bin(*tmp_hex--);
 283                 *tmp_raw |= hex_to_bin(*tmp_hex--) << 4;
 284         }
 285
 286         return probe_kernel_write(mem, tmp_raw, count);
 287 }
 288
 289 /*
 290  * While we find nice hex chars, build a long_val.
 291  * Return number of chars processed.
 292  */
 293 int kgdb_hex2long(char **ptr, unsigned long *long_val)
 294 {
 295         int hex_val;
 296         int num = 0;
 297         int negate = 0;
 298
 299         *long_val = 0;
 300
 301         if (**ptr == '-') {
 302                 negate = 1;
 303                 (*ptr)++;
 304         }
 305         while (**ptr) {
 306                 hex_val = hex_to_bin(**ptr);
 307                 if (hex_val < 0)
 308                         break;
 309
 310                 *long_val = (*long_val << 4) | hex_val;
 311                 num++;
 312                 (*ptr)++;
 313         }
 314
 315         if (negate)
 316                 *long_val = -*long_val;
 317
 318         return num;
 319 }
 320
 321 /*
 322  * Copy the binary array pointed to by buf into mem.  Fix $, #, and
 323  * 0x7d escaped with 0x7d. Return -EFAULT on failure or 0 on success.
 324  * The input buf is overwitten with the result to write to mem.
 325  */
 326 static int kgdb_ebin2mem(char *buf, char *mem, int count)
 327 {
 328         int size = 0;
 329         char *c = buf;
 330
 331         while (count-- > 0) {
 332                 c[size] = *buf++;
 333                 if (c[size] == 0x7d)
 334                         c[size] = *buf++ ^ 0x20;
 335                 size++;
 336         }
 337
 338         return probe_kernel_write(mem, c, size);
 339 }
 340
 341 #if DBG_MAX_REG_NUM > 0
 342 void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 343 {
 344         int i;
 345         int idx = 0;
 346         char *ptr = (char *)gdb_regs;
 347
 348         for (i = 0; i < DBG_MAX_REG_NUM; i++) {
 349                 dbg_get_reg(i, ptr + idx, regs);
 350                 idx += dbg_reg_def[i].size;
 351         }
 352 }
 353
 354 void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
 355 {
 356         int i;
 357         int idx = 0;
 358         char *ptr = (char *)gdb_regs;
 359
 360         for (i = 0; i < DBG_MAX_REG_NUM; i++) {
 361                 dbg_set_reg(i, ptr + idx, regs);
 362                 idx += dbg_reg_def[i].size;
 363         }
 364 }
 365 #endif /* DBG_MAX_REG_NUM > 0 */
 366
 367 /* Write memory due to an 'M' or 'X' packet. */
 368 static int write_mem_msg(int binary)
 369 {
 370         char *ptr = &remcom_in_buffer[1];
 371         unsigned long addr;
 372         unsigned long length;
 373         int err;
 374
 375         if (kgdb_hex2long(&ptr, &addr) > 0 && *(ptr++) == ',' &&
 376             kgdb_hex2long(&ptr, &length) > 0 && *(ptr++) == ':') {
 377                 if (binary)
 378                         err = kgdb_ebin2mem(ptr, (char *)addr, length);
 379                 else
 380                         err = kgdb_hex2mem(ptr, (char *)addr, length);
 381                 if (err)
 382                         return err;
 383                 if (CACHE_FLUSH_IS_SAFE)
 384                         flush_icache_range(addr, addr + length);
 385                 return 0;
 386         }
 387
 388         return -EINVAL;
 389 }
 390
 391 static void error_packet(char *pkt, int error)
 392 {
 393         error = -error;
 394         pkt[0] = 'E';
 395         pkt[1] = hex_asc[(error / 10)];
 396         pkt[2] = hex_asc[(error % 10)];
 397         pkt[3] = '\0';
 398 }
 399
 400 /*
 401  * Thread ID accessors. We represent a flat TID space to GDB, where
 402  * the per CPU idle threads (which under Linux all have PID 0) are
 403  * remapped to negative TIDs.
 404  */
 405
 406 #define BUF_THREAD_ID_SIZE      8
 407
 408 static char *pack_threadid(char *pkt, unsigned char *id)
 409 {
 410         unsigned char *limit;
 411         int lzero = 1;
 412
 413         limit = id + (BUF_THREAD_ID_SIZE / 2);
 414         while (id < limit) {
 415                 if (!lzero || *id != 0) {
 416                         pkt = hex_byte_pack(pkt, *id);
 417                         lzero = 0;
 418                 }
 419                 id++;
 420         }
 421
 422         if (lzero)
 423                 pkt = hex_byte_pack(pkt, 0);
 424
 425         return pkt;
 426 }
 427
 428 static void int_to_threadref(unsigned char *id, int value)
 429 {
 430         put_unaligned_be32(value, id);
 431 }
 432
 433 static struct task_struct *getthread(struct pt_regs *regs, int tid)
 434 {
 435         /*
 436          * Non-positive TIDs are remapped to the cpu shadow information
 437          */
 438         if (tid == 0 || tid == -1)
 439                 tid = -atomic_read(&kgdb_active) - 2;
 440         if (tid < -1 && tid > -NR_CPUS - 2) {
 441                 if (kgdb_info[-tid - 2].task)
 442                         return kgdb_info[-tid - 2].task;
 443                 else
 444                         return idle_task(-tid - 2);
 445         }
 446         if (tid <= 0) {
 447                 printk(KERN_ERR "KGDB: Internal thread select error\n");
 448                 dump_stack();
 449                 return NULL;
 450         }
 451
 452         /*
 453          * find_task_by_pid_ns() does not take the tasklist lock anymore
 454          * but is nicely RCU locked - hence is a pretty resilient
 455          * thing to use:
 456          */
 457         return find_task_by_pid_ns(tid, &init_pid_ns);
 458 }
 459
 460
 461 /*
 462  * Remap normal tasks to their real PID,
 463  * CPU shadow threads are mapped to -CPU - 2
 464  */
 465 static inline int shadow_pid(int realpid)
 466 {
 467         if (realpid)
 468                 return realpid;
 469
 470         return -raw_smp_processor_id() - 2;
 471 }
 472
 473 /*
 474  * All the functions that start with gdb_cmd are the various
 475  * operations to implement the handlers for the gdbserial protocol
 476  * where KGDB is communicating with an external debugger
 477  */
 478
 479 /* Handle the '?' status packets */
 480 static void gdb_cmd_status(struct kgdb_state *ks)
 481 {
 482         /*
 483          * We know that this packet is only sent
 484          * during initial connect.  So to be safe,
 485          * we clear out our breakpoints now in case
 486          * GDB is reconnecting.
 487          */
 488         dbg_remove_all_break();
 489
 490         remcom_out_buffer[0] = 'S';
 491         hex_byte_pack(&remcom_out_buffer[1], ks->signo);
 492 }
 493
 494 static void gdb_get_regs_helper(struct kgdb_state *ks)
 495 {
 496         struct task_struct *thread;
 497         void *local_debuggerinfo;
 498         int i;
 499
 500         thread = kgdb_usethread;
 501         if (!thread) {
 502                 thread = kgdb_info[ks->cpu].task;
 503                 local_debuggerinfo = kgdb_info[ks->cpu].debuggerinfo;
 504         } else {
 505                 local_debuggerinfo = NULL;
 506                 for_each_online_cpu(i) {
 507                         /*
 508                          * Try to find the task on some other
 509                          * or possibly this node if we do not
 510                          * find the matching task then we try
 511                          * to approximate the results.
 512                          */
 513                         if (thread == kgdb_info[i].task)
 514                                 local_debuggerinfo = kgdb_info[i].debuggerinfo;
 515                 }
 516         }
 517
 518         /*
 519          * All threads that don't have debuggerinfo should be
 520          * in schedule() sleeping, since all other CPUs
 521          * are in kgdb_wait, and thus have debuggerinfo.
 522          */
 523         if (local_debuggerinfo) {
 524                 pt_regs_to_gdb_regs(gdb_regs, local_debuggerinfo);
 525         } else {
 526                 /*
 527                  * Pull stuff saved during switch_to; nothing
 528                  * else is accessible (or even particularly
 529                  * relevant).
 530                  *
 531                  * This should be enough for a stack trace.
 532                  */
 533                 sleeping_thread_to_gdb_regs(gdb_regs, thread);
 534         }
 535 }
 536
 537 /* Handle the 'g' get registers request */
 538 static void gdb_cmd_getregs(struct kgdb_state *ks)
 539 {
 540         gdb_get_regs_helper(ks);
 541         kgdb_mem2hex((char *)gdb_regs, remcom_out_buffer, NUMREGBYTES);
 542 }
 543
 544 /* Handle the 'G' set registers request */
 545 static void gdb_cmd_setregs(struct kgdb_state *ks)
 546 {
 547         kgdb_hex2mem(&remcom_in_buffer[1], (char *)gdb_regs, NUMREGBYTES);
 548
 549         if (kgdb_usethread && kgdb_usethread != current) {
 550                 error_packet(remcom_out_buffer, -EINVAL);
 551         } else {
 552                 gdb_regs_to_pt_regs(gdb_regs, ks->linux_regs);
 553                 strcpy(remcom_out_buffer, "OK");
 554         }
 555 }
 556
 557 /* Handle the 'm' memory read bytes */
 558 static void gdb_cmd_memread(struct kgdb_state *ks)
 559 {
 560         char *ptr = &remcom_in_buffer[1];
 561         unsigned long length;
 562         unsigned long addr;
 563         char *err;
 564
 565         if (kgdb_hex2long(&ptr, &addr) > 0 && *ptr++ == ',' &&
 566                                         kgdb_hex2long(&ptr, &length) > 0) {
 567                 err = kgdb_mem2hex((char *)addr, remcom_out_buffer, length);
 568                 if (!err)
 569                         error_packet(remcom_out_buffer, -EINVAL);
 570         } else {
 571                 error_packet(remcom_out_buffer, -EINVAL);
 572         }
 573 }
 574
 575 /* Handle the 'M' memory write bytes */
 576 static void gdb_cmd_memwrite(struct kgdb_state *ks)
 577 {
 578         int err = write_mem_msg(0);
 579
 580         if (err)
 581                 error_packet(remcom_out_buffer, err);
 582         else
 583                 strcpy(remcom_out_buffer, "OK");
 584 }
 585
 586 #if DBG_MAX_REG_NUM > 0
 587 static char *gdb_hex_reg_helper(int regnum, char *out)
 588 {
 589         int i;
 590         int offset = 0;
 591
 592         for (i = 0; i < regnum; i++)
 593                 offset += dbg_reg_def[i].size;
 594         return kgdb_mem2hex((char *)gdb_regs + offset, out,
 595                             dbg_reg_def[i].size);
 596 }
 597
 598 /* Handle the 'p' individual regster get */
 599 static void gdb_cmd_reg_get(struct kgdb_state *ks)
 600 {
 601         unsigned long regnum;
 602         char *ptr = &remcom_in_buffer[1];
 603
 604         kgdb_hex2long(&ptr, &regnum);
 605         if (regnum >= DBG_MAX_REG_NUM) {
 606                 error_packet(remcom_out_buffer, -EINVAL);
 607                 return;
 608         }
 609         gdb_get_regs_helper(ks);
 610         gdb_hex_reg_helper(regnum, remcom_out_buffer);
 611 }
 612
 613 /* Handle the 'P' individual regster set */
 614 static void gdb_cmd_reg_set(struct kgdb_state *ks)
 615 {
 616         unsigned long regnum;
 617         char *ptr = &remcom_in_buffer[1];
 618         int i = 0;
 619
 620         kgdb_hex2long(&ptr, &regnum);
 621         if (*ptr++ != '=' ||
 622             !(!kgdb_usethread || kgdb_usethread == current) ||
 623             !dbg_get_reg(regnum, gdb_regs, ks->linux_regs)) {
 624                 error_packet(remcom_out_buffer, -EINVAL);
 625                 return;
 626         }
 627         memset(gdb_regs, 0, sizeof(gdb_regs));
 628         while (i < sizeof(gdb_regs) * 2)
 629                 if (hex_to_bin(ptr[i]) >= 0)
 630                         i++;
 631                 else
 632                         break;
 633         i = i / 2;
 634         kgdb_hex2mem(ptr, (char *)gdb_regs, i);
 635         dbg_set_reg(regnum, gdb_regs, ks->linux_regs);
 636         strcpy(remcom_out_buffer, "OK");
 637 }
 638 #endif /* DBG_MAX_REG_NUM > 0 */
 639
 640 /* Handle the 'X' memory binary write bytes */
 641 static void gdb_cmd_binwrite(struct kgdb_state *ks)
 642 {
 643         int err = write_mem_msg(1);
 644
 645         if (err)
 646                 error_packet(remcom_out_buffer, err);
 647         else
 648                 strcpy(remcom_out_buffer, "OK");
 649 }
 650
 651 /* Handle the 'D' or 'k', detach or kill packets */
 652 static void gdb_cmd_detachkill(struct kgdb_state *ks)
 653 {
 654         int error;
 655
 656         /* The detach case */
 657         if (remcom_in_buffer[0] == 'D') {
 658                 error = dbg_remove_all_break();
 659                 if (error < 0) {
 660                         error_packet(remcom_out_buffer, error);
 661                 } else {
 662                         strcpy(remcom_out_buffer, "OK");
 663                         kgdb_connected = 0;
 664                 }
 665                 put_packet(remcom_out_buffer);
 666         } else {
 667                 /*
 668                  * Assume the kill case, with no exit code checking,
 669                  * trying to force detach the debugger:
 670                  */
 671                 dbg_remove_all_break();
 672                 kgdb_connected = 0;
 673         }
 674 }
 675
 676 /* Handle the 'R' reboot packets */
 677 static int gdb_cmd_reboot(struct kgdb_state *ks)
 678 {
 679         /* For now, only honor R0 */
 680         if (strcmp(remcom_in_buffer, "R0") == 0) {
 681                 printk(KERN_CRIT "Executing emergency reboot\n");
 682                 strcpy(remcom_out_buffer, "OK");
 683                 put_packet(remcom_out_buffer);
 684
 685                 /*
 686                  * Execution should not return from
 687                  * machine_emergency_restart()
 688                  */
 689                 machine_emergency_restart();
 690                 kgdb_connected = 0;
 691
 692                 return 1;
 693         }
 694         return 0;
 695 }
 696
 697 /* Handle the 'q' query packets */
 698 static void gdb_cmd_query(struct kgdb_state *ks)
 699 {
 700         struct task_struct *g;
 701         struct task_struct *p;
 702         unsigned char thref[BUF_THREAD_ID_SIZE];
 703         char *ptr;
 704         int i;
 705         int cpu;
 706         int finished = 0;
 707
 708         switch (remcom_in_buffer[1]) {
 709         case 's':
 710         case 'f':
 711                 if (memcmp(remcom_in_buffer + 2, "ThreadInfo", 10))
 712                         break;
 713
 714                 i = 0;
 715                 remcom_out_buffer[0] = 'm';
 716                 ptr = remcom_out_buffer + 1;
 717                 if (remcom_in_buffer[1] == 'f') {
 718                         /* Each cpu is a shadow thread */
 719                         for_each_online_cpu(cpu) {
 720                                 ks->thr_query = 0;
 721                                 int_to_threadref(thref, -cpu - 2);
 722                                 ptr = pack_threadid(ptr, thref);
 723                                 *(ptr++) = ',';
 724                                 i++;
 725                         }
 726                 }
 727
 728                 do_each_thread(g, p) {
 729                         if (i >= ks->thr_query && !finished) {
 730                                 int_to_threadref(thref, p->pid);
 731                                 ptr = pack_threadid(ptr, thref);
 732                                 *(ptr++) = ',';
 733                                 ks->thr_query++;
 734                                 if (ks->thr_query % KGDB_MAX_THREAD_QUERY == 0)
 735                                         finished = 1;
 736                         }
 737                         i++;
 738                 } while_each_thread(g, p);
 739
 740                 *(--ptr) = '\0';
 741                 break;
 742
 743         case 'C':
 744                 /* Current thread id */
 745                 strcpy(remcom_out_buffer, "QC");
 746                 ks->threadid = shadow_pid(current->pid);
 747                 int_to_threadref(thref, ks->threadid);
 748                 pack_threadid(remcom_out_buffer + 2, thref);
 749                 break;
 750         case 'T':
 751                 if (memcmp(remcom_in_buffer + 1, "ThreadExtraInfo,", 16))
 752                         break;
 753
 754                 ks->threadid = 0;
 755                 ptr = remcom_in_buffer + 17;
 756                 kgdb_hex2long(&ptr, &ks->threadid);
 757                 if (!getthread(ks->linux_regs, ks->threadid)) {
 758                         error_packet(remcom_out_buffer, -EINVAL);
 759                         break;
 760                 }
 761                 if ((int)ks->threadid > 0) {
 762                         kgdb_mem2hex(getthread(ks->linux_regs,
 763                                         ks->threadid)->comm,
 764                                         remcom_out_buffer, 16);
 765                 } else {
 766                         static char tmpstr[23 + BUF_THREAD_ID_SIZE];
 767
 768                         sprintf(tmpstr, "shadowCPU%d",
 769                                         (int)(-ks->threadid - 2));
 770                         kgdb_mem2hex(tmpstr, remcom_out_buffer, strlen(tmpstr));
 771                 }
 772                 break;
 773 #ifdef CONFIG_KGDB_KDB
 774         case 'R':
 775                 if (strncmp(remcom_in_buffer, "qRcmd,", 6) == 0) {
 776                         int len = strlen(remcom_in_buffer + 6);
 777
 778                         if ((len % 2) != 0) {
 779                                 strcpy(remcom_out_buffer, "E01");
 780                                 break;
 781                         }
 782                         kgdb_hex2mem(remcom_in_buffer + 6,
 783                                      remcom_out_buffer, len);
 784                         len = len / 2;
 785                         remcom_out_buffer[len++] = 0;
 786
 787                         kdb_common_init_state(ks);
 788                         kdb_parse(remcom_out_buffer);
 789                         kdb_common_deinit_state();
 790
 791                         strcpy(remcom_out_buffer, "OK");
 792                 }
 793                 break;
 794 #endif
 795         }
 796 }
 797
 798 /* Handle the 'H' task query packets */
 799 static void gdb_cmd_task(struct kgdb_state *ks)
 800 {
 801         struct task_struct *thread;
 802         char *ptr;
 803
 804         switch (remcom_in_buffer[1]) {
 805         case 'g':
 806                 ptr = &remcom_in_buffer[2];
 807                 kgdb_hex2long(&ptr, &ks->threadid);
 808                 thread = getthread(ks->linux_regs, ks->threadid);
 809                 if (!thread && ks->threadid > 0) {
 810                         error_packet(remcom_out_buffer, -EINVAL);
 811                         break;
 812                 }
 813                 kgdb_usethread = thread;
 814                 ks->kgdb_usethreadid = ks->threadid;
 815                 strcpy(remcom_out_buffer, "OK");
 816                 break;
 817         case 'c':
 818                 ptr = &remcom_in_buffer[2];
 819                 kgdb_hex2long(&ptr, &ks->threadid);
 820                 if (!ks->threadid) {
 821                         kgdb_contthread = NULL;
 822                 } else {
 823                         thread = getthread(ks->linux_regs, ks->threadid);
 824                         if (!thread && ks->threadid > 0) {
 825                                 error_packet(remcom_out_buffer, -EINVAL);
 826                                 break;
 827                         }
 828                         kgdb_contthread = thread;
 829                 }
 830                 strcpy(remcom_out_buffer, "OK");
 831                 break;
 832         }
 833 }
 834
 835 /* Handle the 'T' thread query packets */
 836 static void gdb_cmd_thread(struct kgdb_state *ks)
 837 {
 838         char *ptr = &remcom_in_buffer[1];
 839         struct task_struct *thread;
 840
 841         kgdb_hex2long(&ptr, &ks->threadid);
 842         thread = getthread(ks->linux_regs, ks->threadid);
 843         if (thread)
 844                 strcpy(remcom_out_buffer, "OK");
 845         else
 846                 error_packet(remcom_out_buffer, -EINVAL);
 847 }
 848
 849 /* Handle the 'z' or 'Z' breakpoint remove or set packets */
 850 static void gdb_cmd_break(struct kgdb_state *ks)
 851 {
 852         /*
 853          * Since GDB-5.3, it's been drafted that '0' is a software
 854          * breakpoint, '1' is a hardware breakpoint, so let's do that.
 855          */
 856         char *bpt_type = &remcom_in_buffer[1];
 857         char *ptr = &remcom_in_buffer[2];
 858         unsigned long addr;
 859         unsigned long length;
 860         int error = 0;
 861
 862         if (arch_kgdb_ops.set_hw_breakpoint && *bpt_type >= '1') {
 863                 /* Unsupported */
 864                 if (*bpt_type > '4')
 865                         return;
 866         } else {
 867                 if (*bpt_type != '0' && *bpt_type != '1')
 868                         /* Unsupported. */
 869                         return;
 870         }
 871
 872         /*
 873          * Test if this is a hardware breakpoint, and
 874          * if we support it:
 875          */
 876         if (*bpt_type == '1' && !(arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT))
 877                 /* Unsupported. */
 878                 return;
 879
 880         if (*(ptr++) != ',') {
 881                 error_packet(remcom_out_buffer, -EINVAL);
 882                 return;
 883         }
 884         if (!kgdb_hex2long(&ptr, &addr)) {
 885                 error_packet(remcom_out_buffer, -EINVAL);
 886                 return;
 887         }
 888         if (*(ptr++) != ',' ||
 889                 !kgdb_hex2long(&ptr, &length)) {
 890                 error_packet(remcom_out_buffer, -EINVAL);
 891                 return;
 892         }
 893
 894         if (remcom_in_buffer[0] == 'Z' && *bpt_type == '0')
 895                 error = dbg_set_sw_break(addr);
 896         else if (remcom_in_buffer[0] == 'z' && *bpt_type == '0')
 897                 error = dbg_remove_sw_break(addr);
 898         else if (remcom_in_buffer[0] == 'Z')
 899                 error = arch_kgdb_ops.set_hw_breakpoint(addr,
 900                         (int)length, *bpt_type - '0');
 901         else if (remcom_in_buffer[0] == 'z')
 902                 error = arch_kgdb_ops.remove_hw_breakpoint(addr,
 903                         (int) length, *bpt_type - '0');
 904
 905         if (error == 0)
 906                 strcpy(remcom_out_buffer, "OK");
 907         else
 908                 error_packet(remcom_out_buffer, error);
 909 }
 910
 911 /* Handle the 'C' signal / exception passing packets */
 912 static int gdb_cmd_exception_pass(struct kgdb_state *ks)
 913 {
 914         /* C09 == pass exception
 915          * C15 == detach kgdb, pass exception
 916          */
 917         if (remcom_in_buffer[1] == '0' && remcom_in_buffer[2] == '9') {
 918
 919                 ks->pass_exception = 1;
 920                 remcom_in_buffer[0] = 'c';
 921
 922         } else if (remcom_in_buffer[1] == '1' && remcom_in_buffer[2] == '5') {
 923
 924                 ks->pass_exception = 1;
 925                 remcom_in_buffer[0] = 'D';
 926                 dbg_remove_all_break();
 927                 kgdb_connected = 0;
 928                 return 1;
 929
 930         } else {
 931                 gdbstub_msg_write("KGDB only knows signal 9 (pass)"
 932                         " and 15 (pass and disconnect)\n"
 933                         "Executing a continue without signal passing\n", 0);
 934                 remcom_in_buffer[0] = 'c';
 935         }
 936
 937         /* Indicate fall through */
 938         return -1;
 939 }
 940
 941 /*
 942  * This function performs all gdbserial command procesing
 943  */
 944 int gdb_serial_stub(struct kgdb_state *ks)
 945 {
 946         int error = 0;
 947         int tmp;
 948
 949         /* Initialize comm buffer and globals. */
 950         memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer));
 951         kgdb_usethread = kgdb_info[ks->cpu].task;
 952         ks->kgdb_usethreadid = shadow_pid(kgdb_info[ks->cpu].task->pid);
 953         ks->pass_exception = 0;
 954
 955         if (kgdb_connected) {
 956                 unsigned char thref[BUF_THREAD_ID_SIZE];
 957                 char *ptr;
 958
 959                 /* Reply to host that an exception has occurred */
 960                 ptr = remcom_out_buffer;
 961                 *ptr++ = 'T';
 962                 ptr = hex_byte_pack(ptr, ks->signo);
 963                 ptr += strlen(strcpy(ptr, "thread:"));
 964                 int_to_threadref(thref, shadow_pid(current->pid));
 965                 ptr = pack_threadid(ptr, thref);
 966                 *ptr++ = ';';
 967                 put_packet(remcom_out_buffer);
 968         }
 969
 970         while (1) {
 971                 error = 0;
 972
 973                 /* Clear the out buffer. */
 974                 memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer));
 975
 976                 get_packet(remcom_in_buffer);
 977
 978                 switch (remcom_in_buffer[0]) {
 979                 case '?': /* gdbserial status */
 980                         gdb_cmd_status(ks);
 981                         break;
 982                 case 'g': /* return the value of the CPU registers */
 983                         gdb_cmd_getregs(ks);
 984                         break;
 985                 case 'G': /* set the value of the CPU registers - return OK */
 986                         gdb_cmd_setregs(ks);
 987                         break;
 988                 case 'm': /* mAA..AA,LLLL  Read LLLL bytes at address AA..AA */
 989                         gdb_cmd_memread(ks);
 990                         break;
 991                 case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA..AA */
 992                         gdb_cmd_memwrite(ks);
 993                         break;
 994 #if DBG_MAX_REG_NUM > 0
 995                 case 'p': /* pXX Return gdb register XX (in hex) */
 996                         gdb_cmd_reg_get(ks);
 997                         break;
 998                 case 'P': /* PXX=aaaa Set gdb register XX to aaaa (in hex) */
 999                         gdb_cmd_reg_set(ks);
1000                         break;
1001 #endif /* DBG_MAX_REG_NUM > 0 */
1002                 case 'X': /* XAA..AA,LLLL: Write LLLL bytes at address AA..AA */
1003                         gdb_cmd_binwrite(ks);
1004                         break;
1005                         /* kill or detach. KGDB should treat this like a
1006                          * continue.
1007                          */
1008                 case 'D': /* Debugger detach */
1009                 case 'k': /* Debugger detach via kill */
1010                         gdb_cmd_detachkill(ks);
1011                         goto default_handle;
1012                 case 'R': /* Reboot */
1013                         if (gdb_cmd_reboot(ks))
1014                                 goto default_handle;
1015                         break;
1016                 case 'q': /* query command */
1017                         gdb_cmd_query(ks);
1018                         break;
1019                 case 'H': /* task related */
1020                         gdb_cmd_task(ks);
1021                         break;
1022                 case 'T': /* Query thread status */
1023                         gdb_cmd_thread(ks);
1024                         break;
1025                 case 'z': /* Break point remove */
1026                 case 'Z': /* Break point set */
1027                         gdb_cmd_break(ks);
1028                         break;
1029 #ifdef CONFIG_KGDB_KDB
1030                 case '3': /* Escape into back into kdb */
1031                         if (remcom_in_buffer[1] == '\0') {
1032                                 gdb_cmd_detachkill(ks);
1033                                 return DBG_PASS_EVENT;
1034                         }
1035 #endif
1036                 case 'C': /* Exception passing */
1037                         tmp = gdb_cmd_exception_pass(ks);
1038                         if (tmp > 0)
1039                                 goto default_handle;
1040                         if (tmp == 0)
1041                                 break;
1042                         /* Fall through on tmp < 0 */
1043                 case 'c': /* Continue packet */
1044                 case 's': /* Single step packet */
1045                         if (kgdb_contthread && kgdb_contthread != current) {
1046                                 /* Can't switch threads in kgdb */
1047                                 error_packet(remcom_out_buffer, -EINVAL);
1048                                 break;
1049                         }
1050                         dbg_activate_sw_breakpoints();
1051                         /* Fall through to default processing */
1052                 default:
1053 default_handle:
1054                         error = kgdb_arch_handle_exception(ks->ex_vector,
1055                                                 ks->signo,
1056                                                 ks->err_code,
1057                                                 remcom_in_buffer,
1058                                                 remcom_out_buffer,
1059                                                 ks->linux_regs);
1060                         /*
1061                          * Leave cmd processing on error, detach,
1062                          * kill, continue, or single step.
1063                          */
1064                         if (error >= 0 || remcom_in_buffer[0] == 'D' ||
1065                             remcom_in_buffer[0] == 'k') {
1066                                 error = 0;
1067                                 goto kgdb_exit;
1068                         }
1069
1070                 }
1071
1072                 /* reply to the request */
1073                 put_packet(remcom_out_buffer);
1074         }
1075
1076 kgdb_exit:
1077         if (ks->pass_exception)
1078                 error = 1;
1079         return error;
1080 }
1081
1082 int gdbstub_state(struct kgdb_state *ks, char *cmd)
1083 {
1084         int error;
1085
1086         switch (cmd[0]) {
1087         case 'e':
1088                 error = kgdb_arch_handle_exception(ks->ex_vector,
1089                                                    ks->signo,
1090                                                    ks->err_code,
1091                                                    remcom_in_buffer,
1092                                                    remcom_out_buffer,
1093                                                    ks->linux_regs);
1094                 return error;
1095         case 's':
1096         case 'c':
1097                 strcpy(remcom_in_buffer, cmd);
1098                 return 0;
1099         case '$':
1100                 strcpy(remcom_in_buffer, cmd);
1101                 gdbstub_use_prev_in_buf = strlen(remcom_in_buffer);
1102                 gdbstub_prev_in_buf_pos = 0;
1103                 return 0;
1104         }
1105         dbg_io_ops->write_char('+');
1106         put_packet(remcom_out_buffer);
1107         return 0;
1108 }
1109
1110 /**
1111  * gdbstub_exit - Send an exit message to GDB
1112  * @status: The exit code to report.
1113  */
1114 void gdbstub_exit(int status)
1115 {
1116         unsigned char checksum, ch, buffer[3];
1117         int loop;
1118
1119         if (!kgdb_connected)
1120                 return;
1121         kgdb_connected = 0;
1122
1123         if (!dbg_io_ops || dbg_kdb_mode)
1124                 return;
1125
1126         buffer[0] = 'W';
1127         buffer[1] = hex_asc_hi(status);
1128         buffer[2] = hex_asc_lo(status);
1129
1130         dbg_io_ops->write_char('$');
1131         checksum = 0;
1132
1133         for (loop = 0; loop < 3; loop++) {
1134                 ch = buffer[loop];
1135                 checksum += ch;
1136                 dbg_io_ops->write_char(ch);
1137         }
1138
1139         dbg_io_ops->write_char('#');
1140         dbg_io_ops->write_char(hex_asc_hi(checksum));
1141         dbg_io_ops->write_char(hex_asc_lo(checksum));
1142
1143         /* make sure the output is flushed, lest the bootloader clobber it */
1144         if (dbg_io_ops->flush)
1145                 dbg_io_ops->flush();
1146 }