netfilter: ipt_CLUSTERIP: fix build error without procfs
[linux/fpc-iii.git] / drivers / mfd / twl6030-irq.c
blob53574508a613f254c1295f7709cbc9c41a3a4854
1 /*
2 * twl6030-irq.c - TWL6030 irq support
4 * Copyright (C) 2005-2009 Texas Instruments, Inc.
6 * Modifications to defer interrupt handling to a kernel thread:
7 * Copyright (C) 2006 MontaVista Software, Inc.
9 * Based on tlv320aic23.c:
10 * Copyright (c) by Kai Svahn <kai.svahn@nokia.com>
12 * Code cleanup and modifications to IRQ handler.
13 * by syed khasim <x0khasim@ti.com>
15 * TWL6030 specific code and IRQ handling changes by
16 * Jagadeesh Bhaskar Pakaravoor <j-pakaravoor@ti.com>
17 * Balaji T K <balajitk@ti.com>
19 * This program is free software; you can redistribute it and/or modify
20 * it under the terms of the GNU General Public License as published by
21 * the Free Software Foundation; either version 2 of the License, or
22 * (at your option) any later version.
24 * This program is distributed in the hope that it will be useful,
25 * but WITHOUT ANY WARRANTY; without even the implied warranty of
26 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
27 * GNU General Public License for more details.
29 * You should have received a copy of the GNU General Public License
30 * along with this program; if not, write to the Free Software
31 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
34 #include <linux/export.h>
35 #include <linux/interrupt.h>
36 #include <linux/irq.h>
37 #include <linux/kthread.h>
38 #include <linux/i2c/twl.h>
39 #include <linux/platform_device.h>
40 #include <linux/suspend.h>
41 #include <linux/of.h>
42 #include <linux/irqdomain.h>
43 #include <linux/of_device.h>
45 #include "twl-core.h"
48 * TWL6030 (unlike its predecessors, which had two level interrupt handling)
49 * three interrupt registers INT_STS_A, INT_STS_B and INT_STS_C.
50 * It exposes status bits saying who has raised an interrupt. There are
51 * three mask registers that corresponds to these status registers, that
52 * enables/disables these interrupts.
54 * We set up IRQs starting at a platform-specified base. An interrupt map table,
55 * specifies mapping between interrupt number and the associated module.
57 #define TWL6030_NR_IRQS 20
59 static int twl6030_interrupt_mapping[24] = {
60 PWR_INTR_OFFSET, /* Bit 0 PWRON */
61 PWR_INTR_OFFSET, /* Bit 1 RPWRON */
62 PWR_INTR_OFFSET, /* Bit 2 BAT_VLOW */
63 RTC_INTR_OFFSET, /* Bit 3 RTC_ALARM */
64 RTC_INTR_OFFSET, /* Bit 4 RTC_PERIOD */
65 HOTDIE_INTR_OFFSET, /* Bit 5 HOT_DIE */
66 SMPSLDO_INTR_OFFSET, /* Bit 6 VXXX_SHORT */
67 SMPSLDO_INTR_OFFSET, /* Bit 7 VMMC_SHORT */
69 SMPSLDO_INTR_OFFSET, /* Bit 8 VUSIM_SHORT */
70 BATDETECT_INTR_OFFSET, /* Bit 9 BAT */
71 SIMDETECT_INTR_OFFSET, /* Bit 10 SIM */
72 MMCDETECT_INTR_OFFSET, /* Bit 11 MMC */
73 RSV_INTR_OFFSET, /* Bit 12 Reserved */
74 MADC_INTR_OFFSET, /* Bit 13 GPADC_RT_EOC */
75 MADC_INTR_OFFSET, /* Bit 14 GPADC_SW_EOC */
76 GASGAUGE_INTR_OFFSET, /* Bit 15 CC_AUTOCAL */
78 USBOTG_INTR_OFFSET, /* Bit 16 ID_WKUP */
79 USBOTG_INTR_OFFSET, /* Bit 17 VBUS_WKUP */
80 USBOTG_INTR_OFFSET, /* Bit 18 ID */
81 USB_PRES_INTR_OFFSET, /* Bit 19 VBUS */
82 CHARGER_INTR_OFFSET, /* Bit 20 CHRG_CTRL */
83 CHARGERFAULT_INTR_OFFSET, /* Bit 21 EXT_CHRG */
84 CHARGERFAULT_INTR_OFFSET, /* Bit 22 INT_CHRG */
85 RSV_INTR_OFFSET, /* Bit 23 Reserved */
88 static int twl6032_interrupt_mapping[24] = {
89 PWR_INTR_OFFSET, /* Bit 0 PWRON */
90 PWR_INTR_OFFSET, /* Bit 1 RPWRON */
91 PWR_INTR_OFFSET, /* Bit 2 SYS_VLOW */
92 RTC_INTR_OFFSET, /* Bit 3 RTC_ALARM */
93 RTC_INTR_OFFSET, /* Bit 4 RTC_PERIOD */
94 HOTDIE_INTR_OFFSET, /* Bit 5 HOT_DIE */
95 SMPSLDO_INTR_OFFSET, /* Bit 6 VXXX_SHORT */
96 PWR_INTR_OFFSET, /* Bit 7 SPDURATION */
98 PWR_INTR_OFFSET, /* Bit 8 WATCHDOG */
99 BATDETECT_INTR_OFFSET, /* Bit 9 BAT */
100 SIMDETECT_INTR_OFFSET, /* Bit 10 SIM */
101 MMCDETECT_INTR_OFFSET, /* Bit 11 MMC */
102 MADC_INTR_OFFSET, /* Bit 12 GPADC_RT_EOC */
103 MADC_INTR_OFFSET, /* Bit 13 GPADC_SW_EOC */
104 GASGAUGE_INTR_OFFSET, /* Bit 14 CC_EOC */
105 GASGAUGE_INTR_OFFSET, /* Bit 15 CC_AUTOCAL */
107 USBOTG_INTR_OFFSET, /* Bit 16 ID_WKUP */
108 USBOTG_INTR_OFFSET, /* Bit 17 VBUS_WKUP */
109 USBOTG_INTR_OFFSET, /* Bit 18 ID */
110 USB_PRES_INTR_OFFSET, /* Bit 19 VBUS */
111 CHARGER_INTR_OFFSET, /* Bit 20 CHRG_CTRL */
112 CHARGERFAULT_INTR_OFFSET, /* Bit 21 EXT_CHRG */
113 CHARGERFAULT_INTR_OFFSET, /* Bit 22 INT_CHRG */
114 RSV_INTR_OFFSET, /* Bit 23 Reserved */
117 /*----------------------------------------------------------------------*/
119 struct twl6030_irq {
120 unsigned int irq_base;
121 int twl_irq;
122 bool irq_wake_enabled;
123 atomic_t wakeirqs;
124 struct notifier_block pm_nb;
125 struct irq_chip irq_chip;
126 struct irq_domain *irq_domain;
127 const int *irq_mapping_tbl;
130 static struct twl6030_irq *twl6030_irq;
132 static int twl6030_irq_pm_notifier(struct notifier_block *notifier,
133 unsigned long pm_event, void *unused)
135 int chained_wakeups;
136 struct twl6030_irq *pdata = container_of(notifier, struct twl6030_irq,
137 pm_nb);
139 switch (pm_event) {
140 case PM_SUSPEND_PREPARE:
141 chained_wakeups = atomic_read(&pdata->wakeirqs);
143 if (chained_wakeups && !pdata->irq_wake_enabled) {
144 if (enable_irq_wake(pdata->twl_irq))
145 pr_err("twl6030 IRQ wake enable failed\n");
146 else
147 pdata->irq_wake_enabled = true;
148 } else if (!chained_wakeups && pdata->irq_wake_enabled) {
149 disable_irq_wake(pdata->twl_irq);
150 pdata->irq_wake_enabled = false;
153 disable_irq(pdata->twl_irq);
154 break;
156 case PM_POST_SUSPEND:
157 enable_irq(pdata->twl_irq);
158 break;
160 default:
161 break;
164 return NOTIFY_DONE;
168 * Threaded irq handler for the twl6030 interrupt.
169 * We query the interrupt controller in the twl6030 to determine
170 * which module is generating the interrupt request and call
171 * handle_nested_irq for that module.
173 static irqreturn_t twl6030_irq_thread(int irq, void *data)
175 int i, ret;
176 union {
177 u8 bytes[4];
178 __le32 int_sts;
179 } sts;
180 u32 int_sts; /* sts.int_sts converted to CPU endianness */
181 struct twl6030_irq *pdata = data;
183 /* read INT_STS_A, B and C in one shot using a burst read */
184 ret = twl_i2c_read(TWL_MODULE_PIH, sts.bytes, REG_INT_STS_A, 3);
185 if (ret) {
186 pr_warn("twl6030_irq: I2C error %d reading PIH ISR\n", ret);
187 return IRQ_HANDLED;
190 sts.bytes[3] = 0; /* Only 24 bits are valid*/
193 * Since VBUS status bit is not reliable for VBUS disconnect
194 * use CHARGER VBUS detection status bit instead.
196 if (sts.bytes[2] & 0x10)
197 sts.bytes[2] |= 0x08;
199 int_sts = le32_to_cpu(sts.int_sts);
200 for (i = 0; int_sts; int_sts >>= 1, i++)
201 if (int_sts & 0x1) {
202 int module_irq =
203 irq_find_mapping(pdata->irq_domain,
204 pdata->irq_mapping_tbl[i]);
205 if (module_irq)
206 handle_nested_irq(module_irq);
207 else
208 pr_err("twl6030_irq: Unmapped PIH ISR %u detected\n",
210 pr_debug("twl6030_irq: PIH ISR %u, virq%u\n",
211 i, module_irq);
215 * NOTE:
216 * Simulation confirms that documentation is wrong w.r.t the
217 * interrupt status clear operation. A single *byte* write to
218 * any one of STS_A to STS_C register results in all three
219 * STS registers being reset. Since it does not matter which
220 * value is written, all three registers are cleared on a
221 * single byte write, so we just use 0x0 to clear.
223 ret = twl_i2c_write_u8(TWL_MODULE_PIH, 0x00, REG_INT_STS_A);
224 if (ret)
225 pr_warn("twl6030_irq: I2C error in clearing PIH ISR\n");
227 return IRQ_HANDLED;
230 /*----------------------------------------------------------------------*/
232 static int twl6030_irq_set_wake(struct irq_data *d, unsigned int on)
234 struct twl6030_irq *pdata = irq_data_get_irq_chip_data(d);
236 if (on)
237 atomic_inc(&pdata->wakeirqs);
238 else
239 atomic_dec(&pdata->wakeirqs);
241 return 0;
244 int twl6030_interrupt_unmask(u8 bit_mask, u8 offset)
246 int ret;
247 u8 unmask_value;
249 ret = twl_i2c_read_u8(TWL_MODULE_PIH, &unmask_value,
250 REG_INT_STS_A + offset);
251 unmask_value &= (~(bit_mask));
252 ret |= twl_i2c_write_u8(TWL_MODULE_PIH, unmask_value,
253 REG_INT_STS_A + offset); /* unmask INT_MSK_A/B/C */
254 return ret;
256 EXPORT_SYMBOL(twl6030_interrupt_unmask);
258 int twl6030_interrupt_mask(u8 bit_mask, u8 offset)
260 int ret;
261 u8 mask_value;
263 ret = twl_i2c_read_u8(TWL_MODULE_PIH, &mask_value,
264 REG_INT_STS_A + offset);
265 mask_value |= (bit_mask);
266 ret |= twl_i2c_write_u8(TWL_MODULE_PIH, mask_value,
267 REG_INT_STS_A + offset); /* mask INT_MSK_A/B/C */
268 return ret;
270 EXPORT_SYMBOL(twl6030_interrupt_mask);
272 int twl6030_mmc_card_detect_config(void)
274 int ret;
275 u8 reg_val = 0;
277 /* Unmasking the Card detect Interrupt line for MMC1 from Phoenix */
278 twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
279 REG_INT_MSK_LINE_B);
280 twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
281 REG_INT_MSK_STS_B);
283 * Initially Configuring MMC_CTRL for receiving interrupts &
284 * Card status on TWL6030 for MMC1
286 ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &reg_val, TWL6030_MMCCTRL);
287 if (ret < 0) {
288 pr_err("twl6030: Failed to read MMCCTRL, error %d\n", ret);
289 return ret;
291 reg_val &= ~VMMC_AUTO_OFF;
292 reg_val |= SW_FC;
293 ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val, TWL6030_MMCCTRL);
294 if (ret < 0) {
295 pr_err("twl6030: Failed to write MMCCTRL, error %d\n", ret);
296 return ret;
299 /* Configuring PullUp-PullDown register */
300 ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &reg_val,
301 TWL6030_CFG_INPUT_PUPD3);
302 if (ret < 0) {
303 pr_err("twl6030: Failed to read CFG_INPUT_PUPD3, error %d\n",
304 ret);
305 return ret;
307 reg_val &= ~(MMC_PU | MMC_PD);
308 ret = twl_i2c_write_u8(TWL6030_MODULE_ID0, reg_val,
309 TWL6030_CFG_INPUT_PUPD3);
310 if (ret < 0) {
311 pr_err("twl6030: Failed to write CFG_INPUT_PUPD3, error %d\n",
312 ret);
313 return ret;
316 return irq_find_mapping(twl6030_irq->irq_domain,
317 MMCDETECT_INTR_OFFSET);
319 EXPORT_SYMBOL(twl6030_mmc_card_detect_config);
321 int twl6030_mmc_card_detect(struct device *dev, int slot)
323 int ret = -EIO;
324 u8 read_reg = 0;
325 struct platform_device *pdev = to_platform_device(dev);
327 if (pdev->id) {
328 /* TWL6030 provide's Card detect support for
329 * only MMC1 controller.
331 pr_err("Unknown MMC controller %d in %s\n", pdev->id, __func__);
332 return ret;
335 * BIT0 of MMC_CTRL on TWL6030 provides card status for MMC1
336 * 0 - Card not present ,1 - Card present
338 ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &read_reg,
339 TWL6030_MMCCTRL);
340 if (ret >= 0)
341 ret = read_reg & STS_MMC;
342 return ret;
344 EXPORT_SYMBOL(twl6030_mmc_card_detect);
346 static int twl6030_irq_map(struct irq_domain *d, unsigned int virq,
347 irq_hw_number_t hwirq)
349 struct twl6030_irq *pdata = d->host_data;
351 irq_set_chip_data(virq, pdata);
352 irq_set_chip_and_handler(virq, &pdata->irq_chip, handle_simple_irq);
353 irq_set_nested_thread(virq, true);
354 irq_set_parent(virq, pdata->twl_irq);
355 irq_set_noprobe(virq);
357 return 0;
360 static void twl6030_irq_unmap(struct irq_domain *d, unsigned int virq)
362 irq_set_chip_and_handler(virq, NULL, NULL);
363 irq_set_chip_data(virq, NULL);
366 static const struct irq_domain_ops twl6030_irq_domain_ops = {
367 .map = twl6030_irq_map,
368 .unmap = twl6030_irq_unmap,
369 .xlate = irq_domain_xlate_onetwocell,
372 static const struct of_device_id twl6030_of_match[] = {
373 {.compatible = "ti,twl6030", &twl6030_interrupt_mapping},
374 {.compatible = "ti,twl6032", &twl6032_interrupt_mapping},
375 { },
378 int twl6030_init_irq(struct device *dev, int irq_num)
380 struct device_node *node = dev->of_node;
381 int nr_irqs;
382 int status;
383 u8 mask[3];
384 const struct of_device_id *of_id;
386 of_id = of_match_device(twl6030_of_match, dev);
387 if (!of_id || !of_id->data) {
388 dev_err(dev, "Unknown TWL device model\n");
389 return -EINVAL;
392 nr_irqs = TWL6030_NR_IRQS;
394 twl6030_irq = devm_kzalloc(dev, sizeof(*twl6030_irq), GFP_KERNEL);
395 if (!twl6030_irq) {
396 dev_err(dev, "twl6030_irq: Memory allocation failed\n");
397 return -ENOMEM;
400 mask[0] = 0xFF;
401 mask[1] = 0xFF;
402 mask[2] = 0xFF;
404 /* mask all int lines */
405 status = twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_MSK_LINE_A, 3);
406 /* mask all int sts */
407 status |= twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_MSK_STS_A, 3);
408 /* clear INT_STS_A,B,C */
409 status |= twl_i2c_write(TWL_MODULE_PIH, &mask[0], REG_INT_STS_A, 3);
411 if (status < 0) {
412 dev_err(dev, "I2C err writing TWL_MODULE_PIH: %d\n", status);
413 return status;
417 * install an irq handler for each of the modules;
418 * clone dummy irq_chip since PIH can't *do* anything
420 twl6030_irq->irq_chip = dummy_irq_chip;
421 twl6030_irq->irq_chip.name = "twl6030";
422 twl6030_irq->irq_chip.irq_set_type = NULL;
423 twl6030_irq->irq_chip.irq_set_wake = twl6030_irq_set_wake;
425 twl6030_irq->pm_nb.notifier_call = twl6030_irq_pm_notifier;
426 atomic_set(&twl6030_irq->wakeirqs, 0);
427 twl6030_irq->irq_mapping_tbl = of_id->data;
429 twl6030_irq->irq_domain =
430 irq_domain_add_linear(node, nr_irqs,
431 &twl6030_irq_domain_ops, twl6030_irq);
432 if (!twl6030_irq->irq_domain) {
433 dev_err(dev, "Can't add irq_domain\n");
434 return -ENOMEM;
437 dev_info(dev, "PIH (irq %d) nested IRQs\n", irq_num);
439 /* install an irq handler to demultiplex the TWL6030 interrupt */
440 status = request_threaded_irq(irq_num, NULL, twl6030_irq_thread,
441 IRQF_ONESHOT, "TWL6030-PIH", twl6030_irq);
442 if (status < 0) {
443 dev_err(dev, "could not claim irq %d: %d\n", irq_num, status);
444 goto fail_irq;
447 twl6030_irq->twl_irq = irq_num;
448 register_pm_notifier(&twl6030_irq->pm_nb);
449 return 0;
451 fail_irq:
452 irq_domain_remove(twl6030_irq->irq_domain);
453 return status;
456 int twl6030_exit_irq(void)
458 if (twl6030_irq && twl6030_irq->twl_irq) {
459 unregister_pm_notifier(&twl6030_irq->pm_nb);
460 free_irq(twl6030_irq->twl_irq, NULL);
462 * TODO: IRQ domain and allocated nested IRQ descriptors
463 * should be freed somehow here. Now It can't be done, because
464 * child devices will not be deleted during removing of
465 * TWL Core driver and they will still contain allocated
466 * virt IRQs in their Resources tables.
467 * The same prevents us from using devm_request_threaded_irq()
468 * in this module.
471 return 0;