thermal/x86_pkg_temp: Move work into package struct
[linux/fpc-iii.git] / drivers / leds / leds-lt3593.c
bloba7ff510cbdd06e113ee5e744ea0c1c9eb8c4618e
1 /*
2 * LEDs driver for LT3593 controllers
4 * See the datasheet at http://cds.linear.com/docs/Datasheet/3593f.pdf
6 * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
8 * Based on leds-gpio.c,
10 * Copyright (C) 2007 8D Technologies inc.
11 * Raphael Assenat <raph@8d.com>
12 * Copyright (C) 2008 Freescale Semiconductor, Inc.
14 * This program is free software; you can redistribute it and/or modify
15 * it under the terms of the GNU General Public License version 2 as
16 * published by the Free Software Foundation.
19 #include <linux/kernel.h>
20 #include <linux/platform_device.h>
21 #include <linux/leds.h>
22 #include <linux/delay.h>
23 #include <linux/gpio.h>
24 #include <linux/slab.h>
25 #include <linux/module.h>
27 struct lt3593_led_data {
28 struct led_classdev cdev;
29 unsigned gpio;
32 static int lt3593_led_set(struct led_classdev *led_cdev,
33 enum led_brightness value)
35 struct lt3593_led_data *led_dat =
36 container_of(led_cdev, struct lt3593_led_data, cdev);
37 int pulses;
40 * The LT3593 resets its internal current level register to the maximum
41 * level on the first falling edge on the control pin. Each following
42 * falling edge decreases the current level by 625uA. Up to 32 pulses
43 * can be sent, so the maximum power reduction is 20mA.
44 * After a timeout of 128us, the value is taken from the register and
45 * applied is to the output driver.
48 if (value == 0) {
49 gpio_set_value_cansleep(led_dat->gpio, 0);
50 return 0;
53 pulses = 32 - (value * 32) / 255;
55 if (pulses == 0) {
56 gpio_set_value_cansleep(led_dat->gpio, 0);
57 mdelay(1);
58 gpio_set_value_cansleep(led_dat->gpio, 1);
59 return 0;
62 gpio_set_value_cansleep(led_dat->gpio, 1);
64 while (pulses--) {
65 gpio_set_value_cansleep(led_dat->gpio, 0);
66 udelay(1);
67 gpio_set_value_cansleep(led_dat->gpio, 1);
68 udelay(1);
71 return 0;
74 static int create_lt3593_led(const struct gpio_led *template,
75 struct lt3593_led_data *led_dat, struct device *parent)
77 int ret, state;
79 /* skip leds on GPIOs that aren't available */
80 if (!gpio_is_valid(template->gpio)) {
81 dev_info(parent, "%s: skipping unavailable LT3593 LED at gpio %d (%s)\n",
82 KBUILD_MODNAME, template->gpio, template->name);
83 return 0;
86 led_dat->cdev.name = template->name;
87 led_dat->cdev.default_trigger = template->default_trigger;
88 led_dat->gpio = template->gpio;
90 led_dat->cdev.brightness_set_blocking = lt3593_led_set;
92 state = (template->default_state == LEDS_GPIO_DEFSTATE_ON);
93 led_dat->cdev.brightness = state ? LED_FULL : LED_OFF;
95 if (!template->retain_state_suspended)
96 led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
98 ret = devm_gpio_request_one(parent, template->gpio, state ?
99 GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
100 template->name);
101 if (ret < 0)
102 return ret;
104 ret = led_classdev_register(parent, &led_dat->cdev);
105 if (ret < 0)
106 return ret;
108 dev_info(parent, "%s: registered LT3593 LED '%s' at GPIO %d\n",
109 KBUILD_MODNAME, template->name, template->gpio);
111 return 0;
114 static void delete_lt3593_led(struct lt3593_led_data *led)
116 if (!gpio_is_valid(led->gpio))
117 return;
119 led_classdev_unregister(&led->cdev);
122 static int lt3593_led_probe(struct platform_device *pdev)
124 struct gpio_led_platform_data *pdata = dev_get_platdata(&pdev->dev);
125 struct lt3593_led_data *leds_data;
126 int i, ret = 0;
128 if (!pdata)
129 return -EBUSY;
131 leds_data = devm_kzalloc(&pdev->dev,
132 sizeof(struct lt3593_led_data) * pdata->num_leds,
133 GFP_KERNEL);
134 if (!leds_data)
135 return -ENOMEM;
137 for (i = 0; i < pdata->num_leds; i++) {
138 ret = create_lt3593_led(&pdata->leds[i], &leds_data[i],
139 &pdev->dev);
140 if (ret < 0)
141 goto err;
144 platform_set_drvdata(pdev, leds_data);
146 return 0;
148 err:
149 for (i = i - 1; i >= 0; i--)
150 delete_lt3593_led(&leds_data[i]);
152 return ret;
155 static int lt3593_led_remove(struct platform_device *pdev)
157 int i;
158 struct gpio_led_platform_data *pdata = dev_get_platdata(&pdev->dev);
159 struct lt3593_led_data *leds_data;
161 leds_data = platform_get_drvdata(pdev);
163 for (i = 0; i < pdata->num_leds; i++)
164 delete_lt3593_led(&leds_data[i]);
166 return 0;
169 static struct platform_driver lt3593_led_driver = {
170 .probe = lt3593_led_probe,
171 .remove = lt3593_led_remove,
172 .driver = {
173 .name = "leds-lt3593",
177 module_platform_driver(lt3593_led_driver);
179 MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
180 MODULE_DESCRIPTION("LED driver for LT3593 controllers");
181 MODULE_LICENSE("GPL");
182 MODULE_ALIAS("platform:leds-lt3593");