2 * Copyright (c) 2008, 2009 open80211s Ltd.
3 * Authors: Luis Carlos Cobo <luisca@cozybit.com>
4 * Javier Cardona <javier@cozybit.com>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
11 #include <linux/slab.h>
12 #include <asm/unaligned.h>
13 #include "ieee80211_i.h"
16 #define TMR_RUNNING_HK 0
17 #define TMR_RUNNING_MP 1
18 #define TMR_RUNNING_MPR 2
21 static struct kmem_cache
*rm_cache
;
23 #ifdef CONFIG_MAC80211_MESH
24 bool mesh_action_is_path_sel(struct ieee80211_mgmt
*mgmt
)
26 return (mgmt
->u
.action
.u
.mesh_action
.action_code
==
27 WLAN_MESH_ACTION_HWMP_PATH_SELECTION
);
30 bool mesh_action_is_path_sel(struct ieee80211_mgmt
*mgmt
)
34 void ieee80211s_init(void)
38 rm_cache
= kmem_cache_create("mesh_rmc", sizeof(struct rmc_entry
),
42 void ieee80211s_stop(void)
44 mesh_pathtbl_unregister();
45 kmem_cache_destroy(rm_cache
);
48 static void ieee80211_mesh_housekeeping_timer(unsigned long data
)
50 struct ieee80211_sub_if_data
*sdata
= (void *) data
;
51 struct ieee80211_local
*local
= sdata
->local
;
52 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
54 set_bit(MESH_WORK_HOUSEKEEPING
, &ifmsh
->wrkq_flags
);
56 if (local
->quiescing
) {
57 set_bit(TMR_RUNNING_HK
, &ifmsh
->timers_running
);
61 ieee80211_queue_work(&local
->hw
, &sdata
->work
);
65 * mesh_matches_local - check if the config of a mesh point matches ours
67 * @sdata: local mesh subif
68 * @ie: information elements of a management frame from the mesh peer
70 * This function checks if the mesh configuration of a mesh point matches the
71 * local mesh configuration, i.e. if both nodes belong to the same mesh network.
73 bool mesh_matches_local(struct ieee80211_sub_if_data
*sdata
,
74 struct ieee802_11_elems
*ie
)
76 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
77 struct ieee80211_local
*local
= sdata
->local
;
81 * As support for each feature is added, check for matching
82 * - On mesh config capabilities
83 * - Power Save Support En
84 * - Sync support enabled
85 * - Sync support active
86 * - Sync support required from peer
88 * - Power management control on fc
90 if (!(ifmsh
->mesh_id_len
== ie
->mesh_id_len
&&
91 memcmp(ifmsh
->mesh_id
, ie
->mesh_id
, ie
->mesh_id_len
) == 0 &&
92 (ifmsh
->mesh_pp_id
== ie
->mesh_config
->meshconf_psel
) &&
93 (ifmsh
->mesh_pm_id
== ie
->mesh_config
->meshconf_pmetric
) &&
94 (ifmsh
->mesh_cc_id
== ie
->mesh_config
->meshconf_congest
) &&
95 (ifmsh
->mesh_sp_id
== ie
->mesh_config
->meshconf_synch
) &&
96 (ifmsh
->mesh_auth_id
== ie
->mesh_config
->meshconf_auth
)))
99 ieee80211_sta_get_rates(local
, ie
, local
->oper_channel
->band
,
102 if (sdata
->vif
.bss_conf
.basic_rates
!= basic_rates
)
105 /* disallow peering with mismatched channel types for now */
106 if (ie
->ht_operation
&&
107 (local
->_oper_channel_type
!=
108 ieee80211_ht_oper_to_channel_type(ie
->ht_operation
)))
117 * mesh_peer_accepts_plinks - check if an mp is willing to establish peer links
119 * @ie: information elements of a management frame from the mesh peer
121 bool mesh_peer_accepts_plinks(struct ieee802_11_elems
*ie
)
123 return (ie
->mesh_config
->meshconf_cap
&
124 MESHCONF_CAPAB_ACCEPT_PLINKS
) != 0;
128 * mesh_accept_plinks_update: update accepting_plink in local mesh beacons
130 * @sdata: mesh interface in which mesh beacons are going to be updated
132 void mesh_accept_plinks_update(struct ieee80211_sub_if_data
*sdata
)
136 /* In case mesh_plink_free_count > 0 and mesh_plinktbl_capacity == 0,
137 * the mesh interface might be able to establish plinks with peers that
138 * are already on the table but are not on PLINK_ESTAB state. However,
139 * in general the mesh interface is not accepting peer link requests
140 * from new peers, and that must be reflected in the beacon
142 free_plinks
= mesh_plink_availables(sdata
);
144 if (free_plinks
!= sdata
->u
.mesh
.accepting_plinks
)
145 ieee80211_mesh_housekeeping_timer((unsigned long) sdata
);
148 int mesh_rmc_init(struct ieee80211_sub_if_data
*sdata
)
152 sdata
->u
.mesh
.rmc
= kmalloc(sizeof(struct mesh_rmc
), GFP_KERNEL
);
153 if (!sdata
->u
.mesh
.rmc
)
155 sdata
->u
.mesh
.rmc
->idx_mask
= RMC_BUCKETS
- 1;
156 for (i
= 0; i
< RMC_BUCKETS
; i
++)
157 INIT_LIST_HEAD(&sdata
->u
.mesh
.rmc
->bucket
[i
].list
);
161 void mesh_rmc_free(struct ieee80211_sub_if_data
*sdata
)
163 struct mesh_rmc
*rmc
= sdata
->u
.mesh
.rmc
;
164 struct rmc_entry
*p
, *n
;
167 if (!sdata
->u
.mesh
.rmc
)
170 for (i
= 0; i
< RMC_BUCKETS
; i
++)
171 list_for_each_entry_safe(p
, n
, &rmc
->bucket
[i
].list
, list
) {
173 kmem_cache_free(rm_cache
, p
);
177 sdata
->u
.mesh
.rmc
= NULL
;
181 * mesh_rmc_check - Check frame in recent multicast cache and add if absent.
183 * @sa: source address
184 * @mesh_hdr: mesh_header
186 * Returns: 0 if the frame is not in the cache, nonzero otherwise.
188 * Checks using the source address and the mesh sequence number if we have
189 * received this frame lately. If the frame is not in the cache, it is added to
192 int mesh_rmc_check(u8
*sa
, struct ieee80211s_hdr
*mesh_hdr
,
193 struct ieee80211_sub_if_data
*sdata
)
195 struct mesh_rmc
*rmc
= sdata
->u
.mesh
.rmc
;
199 struct rmc_entry
*p
, *n
;
201 /* Don't care about endianness since only match matters */
202 memcpy(&seqnum
, &mesh_hdr
->seqnum
, sizeof(mesh_hdr
->seqnum
));
203 idx
= le32_to_cpu(mesh_hdr
->seqnum
) & rmc
->idx_mask
;
204 list_for_each_entry_safe(p
, n
, &rmc
->bucket
[idx
].list
, list
) {
206 if (time_after(jiffies
, p
->exp_time
) ||
207 (entries
== RMC_QUEUE_MAX_LEN
)) {
209 kmem_cache_free(rm_cache
, p
);
211 } else if ((seqnum
== p
->seqnum
) &&
212 (compare_ether_addr(sa
, p
->sa
) == 0))
216 p
= kmem_cache_alloc(rm_cache
, GFP_ATOMIC
);
221 p
->exp_time
= jiffies
+ RMC_TIMEOUT
;
222 memcpy(p
->sa
, sa
, ETH_ALEN
);
223 list_add(&p
->list
, &rmc
->bucket
[idx
].list
);
228 mesh_add_meshconf_ie(struct sk_buff
*skb
, struct ieee80211_sub_if_data
*sdata
)
230 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
232 u8 meshconf_len
= sizeof(struct ieee80211_meshconf_ie
);
234 if (skb_tailroom(skb
) < 2 + meshconf_len
)
237 pos
= skb_put(skb
, 2 + meshconf_len
);
238 *pos
++ = WLAN_EID_MESH_CONFIG
;
239 *pos
++ = meshconf_len
;
241 /* Active path selection protocol ID */
242 *pos
++ = ifmsh
->mesh_pp_id
;
243 /* Active path selection metric ID */
244 *pos
++ = ifmsh
->mesh_pm_id
;
245 /* Congestion control mode identifier */
246 *pos
++ = ifmsh
->mesh_cc_id
;
247 /* Synchronization protocol identifier */
248 *pos
++ = ifmsh
->mesh_sp_id
;
249 /* Authentication Protocol identifier */
250 *pos
++ = ifmsh
->mesh_auth_id
;
251 /* Mesh Formation Info - number of neighbors */
252 neighbors
= atomic_read(&ifmsh
->mshstats
.estab_plinks
);
253 /* Number of neighbor mesh STAs or 15 whichever is smaller */
254 neighbors
= (neighbors
> 15) ? 15 : neighbors
;
255 *pos
++ = neighbors
<< 1;
256 /* Mesh capability */
257 ifmsh
->accepting_plinks
= mesh_plink_availables(sdata
);
258 *pos
= MESHCONF_CAPAB_FORWARDING
;
259 *pos
|= ifmsh
->accepting_plinks
?
260 MESHCONF_CAPAB_ACCEPT_PLINKS
: 0x00;
261 *pos
++ |= ifmsh
->adjusting_tbtt
?
262 MESHCONF_CAPAB_TBTT_ADJUSTING
: 0x00;
269 mesh_add_meshid_ie(struct sk_buff
*skb
, struct ieee80211_sub_if_data
*sdata
)
271 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
274 if (skb_tailroom(skb
) < 2 + ifmsh
->mesh_id_len
)
277 pos
= skb_put(skb
, 2 + ifmsh
->mesh_id_len
);
278 *pos
++ = WLAN_EID_MESH_ID
;
279 *pos
++ = ifmsh
->mesh_id_len
;
280 if (ifmsh
->mesh_id_len
)
281 memcpy(pos
, ifmsh
->mesh_id
, ifmsh
->mesh_id_len
);
287 mesh_add_vendor_ies(struct sk_buff
*skb
, struct ieee80211_sub_if_data
*sdata
)
289 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
293 if (!ifmsh
->ie
|| !ifmsh
->ie_len
)
296 /* fast-forward to vendor IEs */
297 offset
= ieee80211_ie_split_vendor(ifmsh
->ie
, ifmsh
->ie_len
, 0);
300 len
= ifmsh
->ie_len
- offset
;
301 data
= ifmsh
->ie
+ offset
;
302 if (skb_tailroom(skb
) < len
)
304 memcpy(skb_put(skb
, len
), data
, len
);
311 mesh_add_rsn_ie(struct sk_buff
*skb
, struct ieee80211_sub_if_data
*sdata
)
313 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
317 if (!ifmsh
->ie
|| !ifmsh
->ie_len
)
322 while (data
< ifmsh
->ie
+ ifmsh
->ie_len
) {
323 if (*data
== WLAN_EID_RSN
) {
331 if (skb_tailroom(skb
) < len
)
333 memcpy(skb_put(skb
, len
), data
, len
);
339 int mesh_add_ds_params_ie(struct sk_buff
*skb
,
340 struct ieee80211_sub_if_data
*sdata
)
342 struct ieee80211_local
*local
= sdata
->local
;
343 struct ieee80211_supported_band
*sband
;
346 if (skb_tailroom(skb
) < 3)
349 sband
= local
->hw
.wiphy
->bands
[local
->hw
.conf
.channel
->band
];
350 if (sband
->band
== IEEE80211_BAND_2GHZ
) {
351 pos
= skb_put(skb
, 2 + 1);
352 *pos
++ = WLAN_EID_DS_PARAMS
;
354 *pos
++ = ieee80211_frequency_to_channel(local
->hw
.conf
.channel
->center_freq
);
360 int mesh_add_ht_cap_ie(struct sk_buff
*skb
,
361 struct ieee80211_sub_if_data
*sdata
)
363 struct ieee80211_local
*local
= sdata
->local
;
364 struct ieee80211_supported_band
*sband
;
367 sband
= local
->hw
.wiphy
->bands
[local
->oper_channel
->band
];
368 if (!sband
->ht_cap
.ht_supported
||
369 local
->_oper_channel_type
== NL80211_CHAN_NO_HT
)
372 if (skb_tailroom(skb
) < 2 + sizeof(struct ieee80211_ht_cap
))
375 pos
= skb_put(skb
, 2 + sizeof(struct ieee80211_ht_cap
));
376 ieee80211_ie_build_ht_cap(pos
, &sband
->ht_cap
, sband
->ht_cap
.cap
);
381 int mesh_add_ht_oper_ie(struct sk_buff
*skb
,
382 struct ieee80211_sub_if_data
*sdata
)
384 struct ieee80211_local
*local
= sdata
->local
;
385 struct ieee80211_channel
*channel
= local
->oper_channel
;
386 enum nl80211_channel_type channel_type
= local
->_oper_channel_type
;
387 struct ieee80211_supported_band
*sband
=
388 local
->hw
.wiphy
->bands
[channel
->band
];
389 struct ieee80211_sta_ht_cap
*ht_cap
= &sband
->ht_cap
;
392 if (!ht_cap
->ht_supported
|| channel_type
== NL80211_CHAN_NO_HT
)
395 if (skb_tailroom(skb
) < 2 + sizeof(struct ieee80211_ht_operation
))
398 pos
= skb_put(skb
, 2 + sizeof(struct ieee80211_ht_operation
));
399 ieee80211_ie_build_ht_oper(pos
, ht_cap
, channel
, channel_type
);
403 static void ieee80211_mesh_path_timer(unsigned long data
)
405 struct ieee80211_sub_if_data
*sdata
=
406 (struct ieee80211_sub_if_data
*) data
;
407 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
408 struct ieee80211_local
*local
= sdata
->local
;
410 if (local
->quiescing
) {
411 set_bit(TMR_RUNNING_MP
, &ifmsh
->timers_running
);
415 ieee80211_queue_work(&local
->hw
, &sdata
->work
);
418 static void ieee80211_mesh_path_root_timer(unsigned long data
)
420 struct ieee80211_sub_if_data
*sdata
=
421 (struct ieee80211_sub_if_data
*) data
;
422 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
423 struct ieee80211_local
*local
= sdata
->local
;
425 set_bit(MESH_WORK_ROOT
, &ifmsh
->wrkq_flags
);
427 if (local
->quiescing
) {
428 set_bit(TMR_RUNNING_MPR
, &ifmsh
->timers_running
);
432 ieee80211_queue_work(&local
->hw
, &sdata
->work
);
435 void ieee80211_mesh_root_setup(struct ieee80211_if_mesh
*ifmsh
)
437 if (ifmsh
->mshcfg
.dot11MeshHWMPRootMode
)
438 set_bit(MESH_WORK_ROOT
, &ifmsh
->wrkq_flags
);
440 clear_bit(MESH_WORK_ROOT
, &ifmsh
->wrkq_flags
);
441 /* stop running timer */
442 del_timer_sync(&ifmsh
->mesh_path_root_timer
);
447 * ieee80211_fill_mesh_addresses - fill addresses of a locally originated mesh frame
448 * @hdr: 802.11 frame header
449 * @fc: frame control field
450 * @meshda: destination address in the mesh
451 * @meshsa: source address address in the mesh. Same as TA, as frame is
452 * locally originated.
454 * Return the length of the 802.11 (does not include a mesh control header)
456 int ieee80211_fill_mesh_addresses(struct ieee80211_hdr
*hdr
, __le16
*fc
,
457 const u8
*meshda
, const u8
*meshsa
)
459 if (is_multicast_ether_addr(meshda
)) {
460 *fc
|= cpu_to_le16(IEEE80211_FCTL_FROMDS
);
462 memcpy(hdr
->addr1
, meshda
, ETH_ALEN
);
463 memcpy(hdr
->addr2
, meshsa
, ETH_ALEN
);
464 memcpy(hdr
->addr3
, meshsa
, ETH_ALEN
);
467 *fc
|= cpu_to_le16(IEEE80211_FCTL_FROMDS
| IEEE80211_FCTL_TODS
);
469 memset(hdr
->addr1
, 0, ETH_ALEN
); /* RA is resolved later */
470 memcpy(hdr
->addr2
, meshsa
, ETH_ALEN
);
471 memcpy(hdr
->addr3
, meshda
, ETH_ALEN
);
472 memcpy(hdr
->addr4
, meshsa
, ETH_ALEN
);
478 * ieee80211_new_mesh_header - create a new mesh header
479 * @meshhdr: uninitialized mesh header
480 * @sdata: mesh interface to be used
481 * @addr4or5: 1st address in the ae header, which may correspond to address 4
482 * (if addr6 is NULL) or address 5 (if addr6 is present). It may
484 * @addr6: 2nd address in the ae header, which corresponds to addr6 of the
487 * Return the header length.
489 int ieee80211_new_mesh_header(struct ieee80211s_hdr
*meshhdr
,
490 struct ieee80211_sub_if_data
*sdata
, char *addr4or5
,
494 BUG_ON(!addr4or5
&& addr6
);
495 memset(meshhdr
, 0, sizeof(*meshhdr
));
496 meshhdr
->ttl
= sdata
->u
.mesh
.mshcfg
.dot11MeshTTL
;
497 put_unaligned(cpu_to_le32(sdata
->u
.mesh
.mesh_seqnum
), &meshhdr
->seqnum
);
498 sdata
->u
.mesh
.mesh_seqnum
++;
499 if (addr4or5
&& !addr6
) {
500 meshhdr
->flags
|= MESH_FLAGS_AE_A4
;
502 memcpy(meshhdr
->eaddr1
, addr4or5
, ETH_ALEN
);
503 } else if (addr4or5
&& addr6
) {
504 meshhdr
->flags
|= MESH_FLAGS_AE_A5_A6
;
505 aelen
+= 2 * ETH_ALEN
;
506 memcpy(meshhdr
->eaddr1
, addr4or5
, ETH_ALEN
);
507 memcpy(meshhdr
->eaddr2
, addr6
, ETH_ALEN
);
512 static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data
*sdata
,
513 struct ieee80211_if_mesh
*ifmsh
)
517 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
518 printk(KERN_DEBUG
"%s: running mesh housekeeping\n",
522 ieee80211_sta_expire(sdata
, IEEE80211_MESH_PEER_INACTIVITY_LIMIT
);
523 mesh_path_expire(sdata
);
525 free_plinks
= mesh_plink_availables(sdata
);
526 if (free_plinks
!= sdata
->u
.mesh
.accepting_plinks
)
527 ieee80211_bss_info_change_notify(sdata
, BSS_CHANGED_BEACON
);
529 mod_timer(&ifmsh
->housekeeping_timer
,
530 round_jiffies(jiffies
+ IEEE80211_MESH_HOUSEKEEPING_INTERVAL
));
533 static void ieee80211_mesh_rootpath(struct ieee80211_sub_if_data
*sdata
)
535 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
537 mesh_path_tx_root_frame(sdata
);
538 mod_timer(&ifmsh
->mesh_path_root_timer
,
539 round_jiffies(TU_TO_EXP_TIME(
540 ifmsh
->mshcfg
.dot11MeshHWMPRannInterval
)));
544 void ieee80211_mesh_quiesce(struct ieee80211_sub_if_data
*sdata
)
546 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
548 /* use atomic bitops in case all timers fire at the same time */
550 if (del_timer_sync(&ifmsh
->housekeeping_timer
))
551 set_bit(TMR_RUNNING_HK
, &ifmsh
->timers_running
);
552 if (del_timer_sync(&ifmsh
->mesh_path_timer
))
553 set_bit(TMR_RUNNING_MP
, &ifmsh
->timers_running
);
554 if (del_timer_sync(&ifmsh
->mesh_path_root_timer
))
555 set_bit(TMR_RUNNING_MPR
, &ifmsh
->timers_running
);
558 void ieee80211_mesh_restart(struct ieee80211_sub_if_data
*sdata
)
560 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
562 if (test_and_clear_bit(TMR_RUNNING_HK
, &ifmsh
->timers_running
))
563 add_timer(&ifmsh
->housekeeping_timer
);
564 if (test_and_clear_bit(TMR_RUNNING_MP
, &ifmsh
->timers_running
))
565 add_timer(&ifmsh
->mesh_path_timer
);
566 if (test_and_clear_bit(TMR_RUNNING_MPR
, &ifmsh
->timers_running
))
567 add_timer(&ifmsh
->mesh_path_root_timer
);
568 ieee80211_mesh_root_setup(ifmsh
);
572 void ieee80211_start_mesh(struct ieee80211_sub_if_data
*sdata
)
574 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
575 struct ieee80211_local
*local
= sdata
->local
;
577 local
->fif_other_bss
++;
578 /* mesh ifaces must set allmulti to forward mcast traffic */
579 atomic_inc(&local
->iff_allmultis
);
580 ieee80211_configure_filter(local
);
582 ifmsh
->mesh_cc_id
= 0; /* Disabled */
583 ifmsh
->mesh_auth_id
= 0; /* Disabled */
584 /* register sync ops from extensible synchronization framework */
585 ifmsh
->sync_ops
= ieee80211_mesh_sync_ops_get(ifmsh
->mesh_sp_id
);
586 ifmsh
->adjusting_tbtt
= false;
587 ifmsh
->sync_offset_clockdrift_max
= 0;
588 set_bit(MESH_WORK_HOUSEKEEPING
, &ifmsh
->wrkq_flags
);
589 ieee80211_mesh_root_setup(ifmsh
);
590 ieee80211_queue_work(&local
->hw
, &sdata
->work
);
591 sdata
->vif
.bss_conf
.beacon_int
= MESH_DEFAULT_BEACON_INTERVAL
;
592 sdata
->vif
.bss_conf
.basic_rates
=
593 ieee80211_mandatory_rates(sdata
->local
,
594 sdata
->local
->hw
.conf
.channel
->band
);
595 ieee80211_bss_info_change_notify(sdata
, BSS_CHANGED_BEACON
|
596 BSS_CHANGED_BEACON_ENABLED
|
597 BSS_CHANGED_BASIC_RATES
|
598 BSS_CHANGED_BEACON_INT
);
601 void ieee80211_stop_mesh(struct ieee80211_sub_if_data
*sdata
)
603 struct ieee80211_local
*local
= sdata
->local
;
604 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
606 ifmsh
->mesh_id_len
= 0;
607 ieee80211_bss_info_change_notify(sdata
, BSS_CHANGED_BEACON_ENABLED
);
608 sta_info_flush(local
, NULL
);
610 del_timer_sync(&sdata
->u
.mesh
.housekeeping_timer
);
611 del_timer_sync(&sdata
->u
.mesh
.mesh_path_root_timer
);
613 * If the timer fired while we waited for it, it will have
614 * requeued the work. Now the work will be running again
615 * but will not rearm the timer again because it checks
616 * whether the interface is running, which, at this point,
619 cancel_work_sync(&sdata
->work
);
621 local
->fif_other_bss
--;
622 atomic_dec(&local
->iff_allmultis
);
623 ieee80211_configure_filter(local
);
626 static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data
*sdata
,
628 struct ieee80211_mgmt
*mgmt
,
630 struct ieee80211_rx_status
*rx_status
)
632 struct ieee80211_local
*local
= sdata
->local
;
633 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
634 struct ieee802_11_elems elems
;
635 struct ieee80211_channel
*channel
;
638 enum ieee80211_band band
= rx_status
->band
;
640 /* ignore ProbeResp to foreign address */
641 if (stype
== IEEE80211_STYPE_PROBE_RESP
&&
642 compare_ether_addr(mgmt
->da
, sdata
->vif
.addr
))
645 baselen
= (u8
*) mgmt
->u
.probe_resp
.variable
- (u8
*) mgmt
;
649 ieee802_11_parse_elems(mgmt
->u
.probe_resp
.variable
, len
- baselen
,
652 /* ignore beacons from secure mesh peers if our security is off */
653 if (elems
.rsn_len
&& sdata
->u
.mesh
.security
== IEEE80211_MESH_SEC_NONE
)
656 if (elems
.ds_params
&& elems
.ds_params_len
== 1)
657 freq
= ieee80211_channel_to_frequency(elems
.ds_params
[0], band
);
659 freq
= rx_status
->freq
;
661 channel
= ieee80211_get_channel(local
->hw
.wiphy
, freq
);
663 if (!channel
|| channel
->flags
& IEEE80211_CHAN_DISABLED
)
666 if (elems
.mesh_id
&& elems
.mesh_config
&&
667 mesh_matches_local(sdata
, &elems
))
668 mesh_neighbour_update(sdata
, mgmt
->sa
, &elems
);
671 ifmsh
->sync_ops
->rx_bcn_presp(sdata
,
672 stype
, mgmt
, &elems
, rx_status
);
675 static void ieee80211_mesh_rx_mgmt_action(struct ieee80211_sub_if_data
*sdata
,
676 struct ieee80211_mgmt
*mgmt
,
678 struct ieee80211_rx_status
*rx_status
)
680 switch (mgmt
->u
.action
.category
) {
681 case WLAN_CATEGORY_SELF_PROTECTED
:
682 switch (mgmt
->u
.action
.u
.self_prot
.action_code
) {
683 case WLAN_SP_MESH_PEERING_OPEN
:
684 case WLAN_SP_MESH_PEERING_CLOSE
:
685 case WLAN_SP_MESH_PEERING_CONFIRM
:
686 mesh_rx_plink_frame(sdata
, mgmt
, len
, rx_status
);
690 case WLAN_CATEGORY_MESH_ACTION
:
691 if (mesh_action_is_path_sel(mgmt
))
692 mesh_rx_path_sel_frame(sdata
, mgmt
, len
);
697 void ieee80211_mesh_rx_queued_mgmt(struct ieee80211_sub_if_data
*sdata
,
700 struct ieee80211_rx_status
*rx_status
;
701 struct ieee80211_mgmt
*mgmt
;
704 rx_status
= IEEE80211_SKB_RXCB(skb
);
705 mgmt
= (struct ieee80211_mgmt
*) skb
->data
;
706 stype
= le16_to_cpu(mgmt
->frame_control
) & IEEE80211_FCTL_STYPE
;
709 case IEEE80211_STYPE_PROBE_RESP
:
710 case IEEE80211_STYPE_BEACON
:
711 ieee80211_mesh_rx_bcn_presp(sdata
, stype
, mgmt
, skb
->len
,
714 case IEEE80211_STYPE_ACTION
:
715 ieee80211_mesh_rx_mgmt_action(sdata
, mgmt
, skb
->len
, rx_status
);
720 void ieee80211_mesh_work(struct ieee80211_sub_if_data
*sdata
)
722 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
724 if (ifmsh
->preq_queue_len
&&
726 ifmsh
->last_preq
+ msecs_to_jiffies(ifmsh
->mshcfg
.dot11MeshHWMPpreqMinInterval
)))
727 mesh_path_start_discovery(sdata
);
729 if (test_and_clear_bit(MESH_WORK_GROW_MPATH_TABLE
, &ifmsh
->wrkq_flags
))
730 mesh_mpath_table_grow();
732 if (test_and_clear_bit(MESH_WORK_GROW_MPP_TABLE
, &ifmsh
->wrkq_flags
))
733 mesh_mpp_table_grow();
735 if (test_and_clear_bit(MESH_WORK_HOUSEKEEPING
, &ifmsh
->wrkq_flags
))
736 ieee80211_mesh_housekeeping(sdata
, ifmsh
);
738 if (test_and_clear_bit(MESH_WORK_ROOT
, &ifmsh
->wrkq_flags
))
739 ieee80211_mesh_rootpath(sdata
);
741 if (test_and_clear_bit(MESH_WORK_DRIFT_ADJUST
, &ifmsh
->wrkq_flags
))
742 mesh_sync_adjust_tbtt(sdata
);
745 void ieee80211_mesh_notify_scan_completed(struct ieee80211_local
*local
)
747 struct ieee80211_sub_if_data
*sdata
;
750 list_for_each_entry_rcu(sdata
, &local
->interfaces
, list
)
751 if (ieee80211_vif_is_mesh(&sdata
->vif
))
752 ieee80211_queue_work(&local
->hw
, &sdata
->work
);
756 void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data
*sdata
)
758 struct ieee80211_if_mesh
*ifmsh
= &sdata
->u
.mesh
;
760 setup_timer(&ifmsh
->housekeeping_timer
,
761 ieee80211_mesh_housekeeping_timer
,
762 (unsigned long) sdata
);
764 ifmsh
->accepting_plinks
= true;
767 ifmsh
->num_gates
= 0;
768 atomic_set(&ifmsh
->mpaths
, 0);
769 mesh_rmc_init(sdata
);
770 ifmsh
->last_preq
= jiffies
;
771 ifmsh
->next_perr
= jiffies
;
772 /* Allocate all mesh structures when creating the first mesh interface. */
775 setup_timer(&ifmsh
->mesh_path_timer
,
776 ieee80211_mesh_path_timer
,
777 (unsigned long) sdata
);
778 setup_timer(&ifmsh
->mesh_path_root_timer
,
779 ieee80211_mesh_path_root_timer
,
780 (unsigned long) sdata
);
781 INIT_LIST_HEAD(&ifmsh
->preq_queue
.list
);
782 spin_lock_init(&ifmsh
->mesh_preq_queue_lock
);
783 spin_lock_init(&ifmsh
->sync_offset_lock
);