2 * Sun3 SCSI stuff by Erik Verbruggen (erik@bigmama.xtdnet.nl)
4 * Sun3 DMA additions by Sam Creasey (sammy@sammy.net)
6 * Adapted from mac_scsinew.h:
9 * Cumana Generic NCR5380 driver defines
11 * Copyright 1993, Drew Eckhardt
13 * (Unix and Linux consulting and custom programming)
19 * For more information, please consult
22 * SCSI Protocol Controller
25 * NCR Microelectronics
26 * 1635 Aeroplaza Drive
27 * Colorado Springs, CO 80916
33 * $Log: cumana_NCR5380.h,v $
36 #ifndef SUN3_NCR5380_H
37 #define SUN3_NCR5380_H
39 #define SUN3SCSI_PUBLIC_RELEASE 1
42 * Int: level 2 autovector
43 * IO: type 1, base 0x00140000, 5 bits phys space: A<4..0>
45 #define IRQ_SUN3_SCSI 2
46 #define IOBASE_SUN3_SCSI 0x00140000
48 #define IOBASE_SUN3_VMESCSI 0xff200000
50 static int sun3scsi_abort(struct scsi_cmnd
*);
51 static int sun3scsi_detect (struct scsi_host_template
*);
52 static const char *sun3scsi_info (struct Scsi_Host
*);
53 static int sun3scsi_bus_reset(struct scsi_cmnd
*);
54 static int sun3scsi_queue_command(struct Scsi_Host
*, struct scsi_cmnd
*);
55 static int sun3scsi_release (struct Scsi_Host
*);
66 #define SG_TABLESIZE SG_NONE
73 #ifndef USE_TAGGED_QUEUING
74 #define USE_TAGGED_QUEUING 1
77 #include <scsi/scsicam.h>
80 #define SUN3_SCSI_NAME "Sun3 NCR5380 VME SCSI"
82 #define SUN3_SCSI_NAME "Sun3 NCR5380 SCSI"
87 #define NCR5380_implementation_fields \
90 #define NCR5380_local_declare() \
91 struct Scsi_Host *_instance
93 #define NCR5380_setup(instance) \
96 #define NCR5380_read(reg) sun3scsi_read(reg)
97 #define NCR5380_write(reg, value) sun3scsi_write(reg, value)
99 #define NCR5380_intr sun3scsi_intr
100 #define NCR5380_queue_command sun3scsi_queue_command
101 #define NCR5380_bus_reset sun3scsi_bus_reset
102 #define NCR5380_abort sun3scsi_abort
103 #define NCR5380_show_info sun3scsi_show_info
104 #define NCR5380_dma_xfer_len(i, cmd, phase) \
105 sun3scsi_dma_xfer_len(cmd->SCp.this_residual,cmd,((phase) & SR_IO) ? 0 : 1)
107 #define NCR5380_dma_write_setup(instance, data, count) sun3scsi_dma_setup(data, count, 1)
108 #define NCR5380_dma_read_setup(instance, data, count) sun3scsi_dma_setup(data, count, 0)
109 #define NCR5380_dma_residual sun3scsi_dma_residual
111 #define BOARD_NORMAL 0
112 #define BOARD_NCR53C400 1
114 /* additional registers - mainly DMA control regs */
115 /* these start at regbase + 8 -- directly after the NCR regs */
116 struct sun3_dma_regs
{
117 unsigned short dma_addr_hi
; /* vme only */
118 unsigned short dma_addr_lo
; /* vme only */
119 unsigned short dma_count_hi
; /* vme only */
120 unsigned short dma_count_lo
; /* vme only */
121 unsigned short udc_data
; /* udc dma data reg (obio only) */
122 unsigned short udc_addr
; /* uda dma addr reg (obio only) */
123 unsigned short fifo_data
; /* fifo data reg, holds extra byte on
125 unsigned short fifo_count
;
126 unsigned short csr
; /* control/status reg */
127 unsigned short bpack_hi
; /* vme only */
128 unsigned short bpack_lo
; /* vme only */
129 unsigned short ivect
; /* vme only */
130 unsigned short fifo_count_hi
; /* vme only */
133 /* ucd chip specific regs - live in dvma space */
134 struct sun3_udc_regs
{
135 unsigned short rsel
; /* select regs to load */
136 unsigned short addr_hi
; /* high word of addr */
137 unsigned short addr_lo
; /* low word */
138 unsigned short count
; /* words to be xfer'd */
139 unsigned short mode_hi
; /* high word of channel mode */
140 unsigned short mode_lo
; /* low word of channel mode */
143 /* addresses of the udc registers */
144 #define UDC_MODE 0x38
145 #define UDC_CSR 0x2e /* command/status */
146 #define UDC_CHN_HI 0x26 /* chain high word */
147 #define UDC_CHN_LO 0x22 /* chain lo word */
148 #define UDC_CURA_HI 0x1a /* cur reg A high */
149 #define UDC_CURA_LO 0x0a /* cur reg A low */
150 #define UDC_CURB_HI 0x12 /* cur reg B high */
151 #define UDC_CURB_LO 0x02 /* cur reg B low */
152 #define UDC_MODE_HI 0x56 /* mode reg high */
153 #define UDC_MODE_LO 0x52 /* mode reg low */
154 #define UDC_COUNT 0x32 /* words to xfer */
156 /* some udc commands */
158 #define UDC_CHN_START 0xa0 /* start chain */
159 #define UDC_INT_ENABLE 0x32 /* channel 1 int on */
162 #define UDC_MODE_HIWORD 0x40
163 #define UDC_MODE_LSEND 0xc2
164 #define UDC_MODE_LRECV 0xd2
166 /* udc reg selections */
167 #define UDC_RSEL_SEND 0x282
168 #define UDC_RSEL_RECV 0x182
170 /* bits in csr reg */
171 #define CSR_DMA_ACTIVE 0x8000
172 #define CSR_DMA_CONFLICT 0x4000
173 #define CSR_DMA_BUSERR 0x2000
175 #define CSR_FIFO_EMPTY 0x400 /* fifo flushed? */
176 #define CSR_SDB_INT 0x200 /* sbc interrupt pending */
177 #define CSR_DMA_INT 0x100 /* dma interrupt pending */
179 #define CSR_LEFT 0xc0
180 #define CSR_LEFT_3 0xc0
181 #define CSR_LEFT_2 0x80
182 #define CSR_LEFT_1 0x40
183 #define CSR_PACK_ENABLE 0x20
185 #define CSR_DMA_ENABLE 0x10
187 #define CSR_SEND 0x8 /* 1 = send 0 = recv */
188 #define CSR_FIFO 0x2 /* reset fifo */
189 #define CSR_INTR 0x4 /* interrupt enable */
192 #define VME_DATA24 0x3d00
194 // debugging printk's, taken from atari_scsi.h
195 /* Debugging printk definitions:
200 * HSH -> PIO handshake
201 * INF -> information transfer
202 * INI -> initialization
204 * LNK -> linked commands
205 * MAIN -> NCR5380_main() control flow
206 * NDAT -> no data-out phase
207 * NWR -> no write commands
208 * PIO -> PIO transfers
209 * PDMA -> pseudo DMA (unused on Atari)
211 * RSL -> reselections
213 * USL -> usleep cpde (unused on Atari)
214 * LBS -> last byte sent (unused on Atari)
215 * RSS -> restarting of selections
216 * EXT -> extended messages
217 * ABRT -> aborting and resetting
218 * TAG -> queue tag handling
219 * MER -> merging of consec. buffers
225 #if NDEBUG & NDEBUG_ARBITRATION
226 #define ARB_PRINTK(format, args...) \
227 printk(KERN_DEBUG format , ## args)
229 #define ARB_PRINTK(format, args...)
231 #if NDEBUG & NDEBUG_AUTOSENSE
232 #define ASEN_PRINTK(format, args...) \
233 printk(KERN_DEBUG format , ## args)
235 #define ASEN_PRINTK(format, args...)
237 #if NDEBUG & NDEBUG_DMA
238 #define DMA_PRINTK(format, args...) \
239 printk(KERN_DEBUG format , ## args)
241 #define DMA_PRINTK(format, args...)
243 #if NDEBUG & NDEBUG_HANDSHAKE
244 #define HSH_PRINTK(format, args...) \
245 printk(KERN_DEBUG format , ## args)
247 #define HSH_PRINTK(format, args...)
249 #if NDEBUG & NDEBUG_INFORMATION
250 #define INF_PRINTK(format, args...) \
251 printk(KERN_DEBUG format , ## args)
253 #define INF_PRINTK(format, args...)
255 #if NDEBUG & NDEBUG_INIT
256 #define INI_PRINTK(format, args...) \
257 printk(KERN_DEBUG format , ## args)
259 #define INI_PRINTK(format, args...)
261 #if NDEBUG & NDEBUG_INTR
262 #define INT_PRINTK(format, args...) \
263 printk(KERN_DEBUG format , ## args)
265 #define INT_PRINTK(format, args...)
267 #if NDEBUG & NDEBUG_LINKED
268 #define LNK_PRINTK(format, args...) \
269 printk(KERN_DEBUG format , ## args)
271 #define LNK_PRINTK(format, args...)
273 #if NDEBUG & NDEBUG_MAIN
274 #define MAIN_PRINTK(format, args...) \
275 printk(KERN_DEBUG format , ## args)
277 #define MAIN_PRINTK(format, args...)
279 #if NDEBUG & NDEBUG_NO_DATAOUT
280 #define NDAT_PRINTK(format, args...) \
281 printk(KERN_DEBUG format , ## args)
283 #define NDAT_PRINTK(format, args...)
285 #if NDEBUG & NDEBUG_NO_WRITE
286 #define NWR_PRINTK(format, args...) \
287 printk(KERN_DEBUG format , ## args)
289 #define NWR_PRINTK(format, args...)
291 #if NDEBUG & NDEBUG_PIO
292 #define PIO_PRINTK(format, args...) \
293 printk(KERN_DEBUG format , ## args)
295 #define PIO_PRINTK(format, args...)
297 #if NDEBUG & NDEBUG_PSEUDO_DMA
298 #define PDMA_PRINTK(format, args...) \
299 printk(KERN_DEBUG format , ## args)
301 #define PDMA_PRINTK(format, args...)
303 #if NDEBUG & NDEBUG_QUEUES
304 #define QU_PRINTK(format, args...) \
305 printk(KERN_DEBUG format , ## args)
307 #define QU_PRINTK(format, args...)
309 #if NDEBUG & NDEBUG_RESELECTION
310 #define RSL_PRINTK(format, args...) \
311 printk(KERN_DEBUG format , ## args)
313 #define RSL_PRINTK(format, args...)
315 #if NDEBUG & NDEBUG_SELECTION
316 #define SEL_PRINTK(format, args...) \
317 printk(KERN_DEBUG format , ## args)
319 #define SEL_PRINTK(format, args...)
321 #if NDEBUG & NDEBUG_USLEEP
322 #define USL_PRINTK(format, args...) \
323 printk(KERN_DEBUG format , ## args)
325 #define USL_PRINTK(format, args...)
327 #if NDEBUG & NDEBUG_LAST_BYTE_SENT
328 #define LBS_PRINTK(format, args...) \
329 printk(KERN_DEBUG format , ## args)
331 #define LBS_PRINTK(format, args...)
333 #if NDEBUG & NDEBUG_RESTART_SELECT
334 #define RSS_PRINTK(format, args...) \
335 printk(KERN_DEBUG format , ## args)
337 #define RSS_PRINTK(format, args...)
339 #if NDEBUG & NDEBUG_EXTENDED
340 #define EXT_PRINTK(format, args...) \
341 printk(KERN_DEBUG format , ## args)
343 #define EXT_PRINTK(format, args...)
345 #if NDEBUG & NDEBUG_ABORT
346 #define ABRT_PRINTK(format, args...) \
347 printk(KERN_DEBUG format , ## args)
349 #define ABRT_PRINTK(format, args...)
351 #if NDEBUG & NDEBUG_TAGS
352 #define TAG_PRINTK(format, args...) \
353 printk(KERN_DEBUG format , ## args)
355 #define TAG_PRINTK(format, args...)
357 #if NDEBUG & NDEBUG_MERGING
358 #define MER_PRINTK(format, args...) \
359 printk(KERN_DEBUG format , ## args)
361 #define MER_PRINTK(format, args...)
364 /* conditional macros for NCR5380_print_{,phase,status} */
366 #define NCR_PRINT(mask) \
367 ((NDEBUG & (mask)) ? NCR5380_print(instance) : (void)0)
369 #define NCR_PRINT_PHASE(mask) \
370 ((NDEBUG & (mask)) ? NCR5380_print_phase(instance) : (void)0)
372 #define NCR_PRINT_STATUS(mask) \
373 ((NDEBUG & (mask)) ? NCR5380_print_status(instance) : (void)0)
377 #endif /* ndef HOSTS_C */
378 #endif /* SUN3_NCR5380_H */