powerpc/eeh: Fix PE#0 check in eeh_add_to_parent_pe()
[linux/fpc-iii.git] / drivers / net / wireless / zd1211rw / zd_mac.h
blob5a484235308f15420571052373890fc05710f8e9
1 /* ZD1211 USB-WLAN driver for Linux
3 * Copyright (C) 2005-2007 Ulrich Kunitz <kune@deine-taler.de>
4 * Copyright (C) 2006-2007 Daniel Drake <dsd@gentoo.org>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, see <http://www.gnu.org/licenses/>.
20 #ifndef _ZD_MAC_H
21 #define _ZD_MAC_H
23 #include <linux/kernel.h>
24 #include <net/mac80211.h>
26 #include "zd_chip.h"
28 struct zd_ctrlset {
29 u8 modulation;
30 __le16 tx_length;
31 u8 control;
32 /* stores only the difference to tx_length on ZD1211B */
33 __le16 packet_length;
34 __le16 current_length;
35 u8 service;
36 __le16 next_frame_length;
37 } __packed;
39 #define ZD_CS_RESERVED_SIZE 25
41 /* The field modulation of struct zd_ctrlset controls the bit rate, the use
42 * of short or long preambles in 802.11b (CCK mode) or the use of 802.11a or
43 * 802.11g in OFDM mode.
45 * The term zd-rate is used for the combination of the modulation type flag
46 * and the "pure" rate value.
48 #define ZD_PURE_RATE_MASK 0x0f
49 #define ZD_MODULATION_TYPE_MASK 0x10
50 #define ZD_RATE_MASK (ZD_PURE_RATE_MASK|ZD_MODULATION_TYPE_MASK)
51 #define ZD_PURE_RATE(modulation) ((modulation) & ZD_PURE_RATE_MASK)
52 #define ZD_MODULATION_TYPE(modulation) ((modulation) & ZD_MODULATION_TYPE_MASK)
53 #define ZD_RATE(modulation) ((modulation) & ZD_RATE_MASK)
55 /* The two possible modulation types. Notify that 802.11b doesn't use the CCK
56 * codeing for the 1 and 2 MBit/s rate. We stay with the term here to remain
57 * consistent with uses the term at other places.
59 #define ZD_CCK 0x00
60 #define ZD_OFDM 0x10
62 /* The ZD1211 firmware uses proprietary encodings of the 802.11b (CCK) rates.
63 * For OFDM the PLCP rate encodings are used. We combine these "pure" rates
64 * with the modulation type flag and call the resulting values zd-rates.
66 #define ZD_CCK_RATE_1M (ZD_CCK|0x00)
67 #define ZD_CCK_RATE_2M (ZD_CCK|0x01)
68 #define ZD_CCK_RATE_5_5M (ZD_CCK|0x02)
69 #define ZD_CCK_RATE_11M (ZD_CCK|0x03)
70 #define ZD_OFDM_RATE_6M (ZD_OFDM|ZD_OFDM_PLCP_RATE_6M)
71 #define ZD_OFDM_RATE_9M (ZD_OFDM|ZD_OFDM_PLCP_RATE_9M)
72 #define ZD_OFDM_RATE_12M (ZD_OFDM|ZD_OFDM_PLCP_RATE_12M)
73 #define ZD_OFDM_RATE_18M (ZD_OFDM|ZD_OFDM_PLCP_RATE_18M)
74 #define ZD_OFDM_RATE_24M (ZD_OFDM|ZD_OFDM_PLCP_RATE_24M)
75 #define ZD_OFDM_RATE_36M (ZD_OFDM|ZD_OFDM_PLCP_RATE_36M)
76 #define ZD_OFDM_RATE_48M (ZD_OFDM|ZD_OFDM_PLCP_RATE_48M)
77 #define ZD_OFDM_RATE_54M (ZD_OFDM|ZD_OFDM_PLCP_RATE_54M)
79 /* The bit 5 of the zd_ctrlset modulation field controls the preamble in CCK
80 * mode or the 802.11a/802.11g selection in OFDM mode.
82 #define ZD_CCK_PREA_LONG 0x00
83 #define ZD_CCK_PREA_SHORT 0x20
84 #define ZD_OFDM_MODE_11G 0x00
85 #define ZD_OFDM_MODE_11A 0x20
87 /* zd_ctrlset control field */
88 #define ZD_CS_NEED_RANDOM_BACKOFF 0x01
89 #define ZD_CS_NO_ACK 0x02
91 #define ZD_CS_FRAME_TYPE_MASK 0x0c
92 #define ZD_CS_DATA_FRAME 0x00
93 #define ZD_CS_PS_POLL_FRAME 0x04
94 #define ZD_CS_MANAGEMENT_FRAME 0x08
95 #define ZD_CS_NO_SEQUENCE_CTL_FRAME 0x0c
97 #define ZD_CS_WAKE_DESTINATION 0x10
98 #define ZD_CS_RTS 0x20
99 #define ZD_CS_ENCRYPT 0x40
100 #define ZD_CS_SELF_CTS 0x80
102 /* Incoming frames are prepended by a PLCP header */
103 #define ZD_PLCP_HEADER_SIZE 5
105 struct rx_length_info {
106 __le16 length[3];
107 __le16 tag;
108 } __packed;
110 #define RX_LENGTH_INFO_TAG 0x697e
112 struct rx_status {
113 u8 signal_quality_cck;
114 /* rssi */
115 u8 signal_strength;
116 u8 signal_quality_ofdm;
117 u8 decryption_type;
118 u8 frame_status;
119 } __packed;
121 /* rx_status field decryption_type */
122 #define ZD_RX_NO_WEP 0
123 #define ZD_RX_WEP64 1
124 #define ZD_RX_TKIP 2
125 #define ZD_RX_AES 4
126 #define ZD_RX_WEP128 5
127 #define ZD_RX_WEP256 6
129 /* rx_status field frame_status */
130 #define ZD_RX_FRAME_MODULATION_MASK 0x01
131 #define ZD_RX_CCK 0x00
132 #define ZD_RX_OFDM 0x01
134 #define ZD_RX_TIMEOUT_ERROR 0x02
135 #define ZD_RX_FIFO_OVERRUN_ERROR 0x04
136 #define ZD_RX_DECRYPTION_ERROR 0x08
137 #define ZD_RX_CRC32_ERROR 0x10
138 #define ZD_RX_NO_ADDR1_MATCH_ERROR 0x20
139 #define ZD_RX_CRC16_ERROR 0x40
140 #define ZD_RX_ERROR 0x80
142 struct tx_retry_rate {
143 int count; /* number of valid element in rate[] array */
144 int rate[10]; /* retry rates, described by an index in zd_rates[] */
147 struct tx_status {
148 u8 type; /* must always be 0x01 : USB_INT_TYPE */
149 u8 id; /* must always be 0xa0 : USB_INT_ID_RETRY_FAILED */
150 u8 rate;
151 u8 pad;
152 u8 mac[ETH_ALEN];
153 u8 retry;
154 u8 failure;
155 } __packed;
157 enum mac_flags {
158 MAC_FIXED_CHANNEL = 0x01,
161 struct housekeeping {
162 struct delayed_work link_led_work;
165 struct beacon {
166 struct delayed_work watchdog_work;
167 struct sk_buff *cur_beacon;
168 unsigned long last_update;
169 u16 interval;
170 u8 period;
173 enum zd_device_flags {
174 ZD_DEVICE_RUNNING,
177 #define ZD_MAC_STATS_BUFFER_SIZE 16
179 #define ZD_MAC_MAX_ACK_WAITERS 50
181 struct zd_mac {
182 struct zd_chip chip;
183 spinlock_t lock;
184 spinlock_t intr_lock;
185 struct ieee80211_hw *hw;
186 struct ieee80211_vif *vif;
187 struct housekeeping housekeeping;
188 struct beacon beacon;
189 struct work_struct set_rts_cts_work;
190 struct work_struct process_intr;
191 struct zd_mc_hash multicast_hash;
192 u8 intr_buffer[USB_MAX_EP_INT_BUFFER];
193 u8 regdomain;
194 u8 default_regdomain;
195 u8 channel;
196 int type;
197 int associated;
198 unsigned long flags;
199 struct sk_buff_head ack_wait_queue;
200 struct ieee80211_channel channels[14];
201 struct ieee80211_rate rates[12];
202 struct ieee80211_supported_band band;
204 /* Short preamble (used for RTS/CTS) */
205 unsigned int short_preamble:1;
207 /* whether to pass frames with CRC errors to stack */
208 unsigned int pass_failed_fcs:1;
210 /* whether to pass control frames to stack */
211 unsigned int pass_ctrl:1;
213 /* whether we have received a 802.11 ACK that is pending */
214 unsigned int ack_pending:1;
216 /* signal strength of the last 802.11 ACK received */
217 int ack_signal;
220 #define ZD_REGDOMAIN_FCC 0x10
221 #define ZD_REGDOMAIN_IC 0x20
222 #define ZD_REGDOMAIN_ETSI 0x30
223 #define ZD_REGDOMAIN_SPAIN 0x31
224 #define ZD_REGDOMAIN_FRANCE 0x32
225 #define ZD_REGDOMAIN_JAPAN_2 0x40
226 #define ZD_REGDOMAIN_JAPAN 0x41
227 #define ZD_REGDOMAIN_JAPAN_3 0x49
229 enum {
230 MIN_CHANNEL24 = 1,
231 MAX_CHANNEL24 = 14,
234 #define ZD_PLCP_SERVICE_LENGTH_EXTENSION 0x80
236 struct ofdm_plcp_header {
237 u8 prefix[3];
238 __le16 service;
239 } __packed;
241 static inline u8 zd_ofdm_plcp_header_rate(const struct ofdm_plcp_header *header)
243 return header->prefix[0] & 0xf;
246 /* The following defines give the encoding of the 4-bit rate field in the
247 * OFDM (802.11a/802.11g) PLCP header. Notify that these values are used to
248 * define the zd-rate values for OFDM.
250 * See the struct zd_ctrlset definition in zd_mac.h.
252 #define ZD_OFDM_PLCP_RATE_6M 0xb
253 #define ZD_OFDM_PLCP_RATE_9M 0xf
254 #define ZD_OFDM_PLCP_RATE_12M 0xa
255 #define ZD_OFDM_PLCP_RATE_18M 0xe
256 #define ZD_OFDM_PLCP_RATE_24M 0x9
257 #define ZD_OFDM_PLCP_RATE_36M 0xd
258 #define ZD_OFDM_PLCP_RATE_48M 0x8
259 #define ZD_OFDM_PLCP_RATE_54M 0xc
261 struct cck_plcp_header {
262 u8 signal;
263 u8 service;
264 __le16 length;
265 __le16 crc16;
266 } __packed;
268 static inline u8 zd_cck_plcp_header_signal(const struct cck_plcp_header *header)
270 return header->signal;
273 /* These defines give the encodings of the signal field in the 802.11b PLCP
274 * header. The signal field gives the bit rate of the following packet. Even
275 * if technically wrong we use CCK here also for the 1 MBit/s and 2 MBit/s
276 * rate to stay consistent with Zydas and our use of the term.
278 * Notify that these values are *not* used in the zd-rates.
280 #define ZD_CCK_PLCP_SIGNAL_1M 0x0a
281 #define ZD_CCK_PLCP_SIGNAL_2M 0x14
282 #define ZD_CCK_PLCP_SIGNAL_5M5 0x37
283 #define ZD_CCK_PLCP_SIGNAL_11M 0x6e
285 static inline struct zd_mac *zd_hw_mac(struct ieee80211_hw *hw)
287 return hw->priv;
290 static inline struct zd_mac *zd_chip_to_mac(struct zd_chip *chip)
292 return container_of(chip, struct zd_mac, chip);
295 static inline struct zd_mac *zd_usb_to_mac(struct zd_usb *usb)
297 return zd_chip_to_mac(zd_usb_to_chip(usb));
300 static inline u8 *zd_mac_get_perm_addr(struct zd_mac *mac)
302 return mac->hw->wiphy->perm_addr;
305 #define zd_mac_dev(mac) (zd_chip_dev(&(mac)->chip))
307 struct ieee80211_hw *zd_mac_alloc_hw(struct usb_interface *intf);
308 void zd_mac_clear(struct zd_mac *mac);
310 int zd_mac_preinit_hw(struct ieee80211_hw *hw);
311 int zd_mac_init_hw(struct ieee80211_hw *hw);
313 int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length);
314 void zd_mac_tx_failed(struct urb *urb);
315 void zd_mac_tx_to_dev(struct sk_buff *skb, int error);
317 int zd_op_start(struct ieee80211_hw *hw);
318 void zd_op_stop(struct ieee80211_hw *hw);
319 int zd_restore_settings(struct zd_mac *mac);
321 #ifdef DEBUG
322 void zd_dump_rx_status(const struct rx_status *status);
323 #else
324 #define zd_dump_rx_status(status)
325 #endif /* DEBUG */
327 #endif /* _ZD_MAC_H */