powerpc/eeh: Fix PE#0 check in eeh_add_to_parent_pe()
[linux/fpc-iii.git] / net / netlabel / netlabel_mgmt.h
blob8b6e1ab62b485729dca126c8ab6a82671623d1fe
1 /*
2 * NetLabel Management Support
4 * This file defines the management functions for the NetLabel system. The
5 * NetLabel system manages static and dynamic label mappings for network
6 * protocols such as CIPSO and RIPSO.
8 * Author: Paul Moore <paul@paul-moore.com>
13 * (c) Copyright Hewlett-Packard Development Company, L.P., 2006
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License as published by
17 * the Free Software Foundation; either version 2 of the License, or
18 * (at your option) any later version.
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
23 * the GNU General Public License for more details.
25 * You should have received a copy of the GNU General Public License
26 * along with this program; if not, see <http://www.gnu.org/licenses/>.
30 #ifndef _NETLABEL_MGMT_H
31 #define _NETLABEL_MGMT_H
33 #include <net/netlabel.h>
34 #include <linux/atomic.h>
37 * The following NetLabel payloads are supported by the management interface.
39 * o ADD:
40 * Sent by an application to add a domain mapping to the NetLabel system.
42 * Required attributes:
44 * NLBL_MGMT_A_DOMAIN
45 * NLBL_MGMT_A_PROTOCOL
47 * If IPv4 is specified the following attributes are required:
49 * NLBL_MGMT_A_IPV4ADDR
50 * NLBL_MGMT_A_IPV4MASK
52 * If IPv6 is specified the following attributes are required:
54 * NLBL_MGMT_A_IPV6ADDR
55 * NLBL_MGMT_A_IPV6MASK
57 * If using NETLBL_NLTYPE_CIPSOV4 the following attributes are required:
59 * NLBL_MGMT_A_CV4DOI
61 * If using NETLBL_NLTYPE_UNLABELED no other attributes are required.
63 * o REMOVE:
64 * Sent by an application to remove a domain mapping from the NetLabel
65 * system.
67 * Required attributes:
69 * NLBL_MGMT_A_DOMAIN
71 * o LISTALL:
72 * This message can be sent either from an application or by the kernel in
73 * response to an application generated LISTALL message. When sent by an
74 * application there is no payload and the NLM_F_DUMP flag should be set.
75 * The kernel should respond with a series of the following messages.
77 * Required attributes:
79 * NLBL_MGMT_A_DOMAIN
81 * If the IP address selectors are not used the following attribute is
82 * required:
84 * NLBL_MGMT_A_PROTOCOL
86 * If the IP address selectors are used then the following attritbute is
87 * required:
89 * NLBL_MGMT_A_SELECTORLIST
91 * If the mapping is using the NETLBL_NLTYPE_CIPSOV4 type then the following
92 * attributes are required:
94 * NLBL_MGMT_A_CV4DOI
96 * If the mapping is using the NETLBL_NLTYPE_UNLABELED type no other
97 * attributes are required.
99 * o ADDDEF:
100 * Sent by an application to set the default domain mapping for the NetLabel
101 * system.
103 * Required attributes:
105 * NLBL_MGMT_A_PROTOCOL
107 * If using NETLBL_NLTYPE_CIPSOV4 the following attributes are required:
109 * NLBL_MGMT_A_CV4DOI
111 * If using NETLBL_NLTYPE_UNLABELED no other attributes are required.
113 * o REMOVEDEF:
114 * Sent by an application to remove the default domain mapping from the
115 * NetLabel system, there is no payload.
117 * o LISTDEF:
118 * This message can be sent either from an application or by the kernel in
119 * response to an application generated LISTDEF message. When sent by an
120 * application there is no payload. On success the kernel should send a
121 * response using the following format.
123 * If the IP address selectors are not used the following attribute is
124 * required:
126 * NLBL_MGMT_A_PROTOCOL
128 * If the IP address selectors are used then the following attritbute is
129 * required:
131 * NLBL_MGMT_A_SELECTORLIST
133 * If the mapping is using the NETLBL_NLTYPE_CIPSOV4 type then the following
134 * attributes are required:
136 * NLBL_MGMT_A_CV4DOI
138 * If the mapping is using the NETLBL_NLTYPE_UNLABELED type no other
139 * attributes are required.
141 * o PROTOCOLS:
142 * Sent by an application to request a list of configured NetLabel protocols
143 * in the kernel. When sent by an application there is no payload and the
144 * NLM_F_DUMP flag should be set. The kernel should respond with a series of
145 * the following messages.
147 * Required attributes:
149 * NLBL_MGMT_A_PROTOCOL
151 * o VERSION:
152 * Sent by an application to request the NetLabel version. When sent by an
153 * application there is no payload. This message type is also used by the
154 * kernel to respond to an VERSION request.
156 * Required attributes:
158 * NLBL_MGMT_A_VERSION
162 /* NetLabel Management commands */
163 enum {
164 NLBL_MGMT_C_UNSPEC,
165 NLBL_MGMT_C_ADD,
166 NLBL_MGMT_C_REMOVE,
167 NLBL_MGMT_C_LISTALL,
168 NLBL_MGMT_C_ADDDEF,
169 NLBL_MGMT_C_REMOVEDEF,
170 NLBL_MGMT_C_LISTDEF,
171 NLBL_MGMT_C_PROTOCOLS,
172 NLBL_MGMT_C_VERSION,
173 __NLBL_MGMT_C_MAX,
176 /* NetLabel Management attributes */
177 enum {
178 NLBL_MGMT_A_UNSPEC,
179 NLBL_MGMT_A_DOMAIN,
180 /* (NLA_NUL_STRING)
181 * the NULL terminated LSM domain string */
182 NLBL_MGMT_A_PROTOCOL,
183 /* (NLA_U32)
184 * the NetLabel protocol type (defined by NETLBL_NLTYPE_*) */
185 NLBL_MGMT_A_VERSION,
186 /* (NLA_U32)
187 * the NetLabel protocol version number (defined by
188 * NETLBL_PROTO_VERSION) */
189 NLBL_MGMT_A_CV4DOI,
190 /* (NLA_U32)
191 * the CIPSOv4 DOI value */
192 NLBL_MGMT_A_IPV6ADDR,
193 /* (NLA_BINARY, struct in6_addr)
194 * an IPv6 address */
195 NLBL_MGMT_A_IPV6MASK,
196 /* (NLA_BINARY, struct in6_addr)
197 * an IPv6 address mask */
198 NLBL_MGMT_A_IPV4ADDR,
199 /* (NLA_BINARY, struct in_addr)
200 * an IPv4 address */
201 NLBL_MGMT_A_IPV4MASK,
202 /* (NLA_BINARY, struct in_addr)
203 * and IPv4 address mask */
204 NLBL_MGMT_A_ADDRSELECTOR,
205 /* (NLA_NESTED)
206 * an IP address selector, must contain an address, mask, and protocol
207 * attribute plus any protocol specific attributes */
208 NLBL_MGMT_A_SELECTORLIST,
209 /* (NLA_NESTED)
210 * the selector list, there must be at least one
211 * NLBL_MGMT_A_ADDRSELECTOR attribute */
212 __NLBL_MGMT_A_MAX,
214 #define NLBL_MGMT_A_MAX (__NLBL_MGMT_A_MAX - 1)
216 /* NetLabel protocol functions */
217 int netlbl_mgmt_genl_init(void);
219 /* NetLabel configured protocol reference counter */
220 extern atomic_t netlabel_mgmt_protocount;
222 #endif